From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- drivers/mtd/spi-nor/xilinx.c | 175 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 175 insertions(+) create mode 100644 drivers/mtd/spi-nor/xilinx.c (limited to 'drivers/mtd/spi-nor/xilinx.c') diff --git a/drivers/mtd/spi-nor/xilinx.c b/drivers/mtd/spi-nor/xilinx.c new file mode 100644 index 0000000000..00d53eae5e --- /dev/null +++ b/drivers/mtd/spi-nor/xilinx.c @@ -0,0 +1,175 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2005, Intec Automation Inc. + * Copyright (C) 2014, Freescale Semiconductor, Inc. + */ + +#include + +#include "core.h" + +#define XILINX_OP_SE 0x50 /* Sector erase */ +#define XILINX_OP_PP 0x82 /* Page program */ +#define XILINX_OP_RDSR 0xd7 /* Read status register */ + +#define XSR_PAGESIZE BIT(0) /* Page size in Po2 or Linear */ +#define XSR_RDY BIT(7) /* Ready */ + +#define XILINX_RDSR_OP(buf) \ + SPI_MEM_OP(SPI_MEM_OP_CMD(XILINX_OP_RDSR, 0), \ + SPI_MEM_OP_NO_ADDR, \ + SPI_MEM_OP_NO_DUMMY, \ + SPI_MEM_OP_DATA_IN(1, buf, 0)) + +#define S3AN_INFO(_jedec_id, _n_sectors, _page_size) \ + .id = { \ + ((_jedec_id) >> 16) & 0xff, \ + ((_jedec_id) >> 8) & 0xff, \ + (_jedec_id) & 0xff \ + }, \ + .id_len = 3, \ + .sector_size = (8 * (_page_size)), \ + .n_sectors = (_n_sectors), \ + .page_size = (_page_size), \ + .n_banks = 1, \ + .addr_nbytes = 3, \ + .flags = SPI_NOR_NO_FR + +/* Xilinx S3AN share MFR with Atmel SPI NOR */ +static const struct flash_info xilinx_nor_parts[] = { + /* Xilinx S3AN Internal Flash */ + { "3S50AN", S3AN_INFO(0x1f2200, 64, 264) }, + { "3S200AN", S3AN_INFO(0x1f2400, 256, 264) }, + { "3S400AN", S3AN_INFO(0x1f2400, 256, 264) }, + { "3S700AN", S3AN_INFO(0x1f2500, 512, 264) }, + { "3S1400AN", S3AN_INFO(0x1f2600, 512, 528) }, +}; + +/* + * This code converts an address to the Default Address Mode, that has non + * power of two page sizes. We must support this mode because it is the default + * mode supported by Xilinx tools, it can access the whole flash area and + * changing over to the Power-of-two mode is irreversible and corrupts the + * original data. + * Addr can safely be unsigned int, the biggest S3AN device is smaller than + * 4 MiB. + */ +static u32 s3an_nor_convert_addr(struct spi_nor *nor, u32 addr) +{ + u32 page_size = nor->params->page_size; + u32 offset, page; + + offset = addr % page_size; + page = addr / page_size; + page <<= (page_size > 512) ? 10 : 9; + + return page | offset; +} + +/** + * xilinx_nor_read_sr() - Read the Status Register on S3AN flashes. + * @nor: pointer to 'struct spi_nor'. + * @sr: pointer to a DMA-able buffer where the value of the + * Status Register will be written. + * + * Return: 0 on success, -errno otherwise. + */ +static int xilinx_nor_read_sr(struct spi_nor *nor, u8 *sr) +{ + int ret; + + if (nor->spimem) { + struct spi_mem_op op = XILINX_RDSR_OP(sr); + + spi_nor_spimem_setup_op(nor, &op, nor->reg_proto); + + ret = spi_mem_exec_op(nor->spimem, &op); + } else { + ret = spi_nor_controller_ops_read_reg(nor, XILINX_OP_RDSR, sr, + 1); + } + + if (ret) + dev_dbg(nor->dev, "error %d reading SR\n", ret); + + return ret; +} + +/** + * xilinx_nor_sr_ready() - Query the Status Register of the S3AN flash to see + * if the flash is ready for new commands. + * @nor: pointer to 'struct spi_nor'. + * + * Return: 1 if ready, 0 if not ready, -errno on errors. + */ +static int xilinx_nor_sr_ready(struct spi_nor *nor) +{ + int ret; + + ret = xilinx_nor_read_sr(nor, nor->bouncebuf); + if (ret) + return ret; + + return !!(nor->bouncebuf[0] & XSR_RDY); +} + +static int xilinx_nor_setup(struct spi_nor *nor, + const struct spi_nor_hwcaps *hwcaps) +{ + u32 page_size; + int ret; + + ret = xilinx_nor_read_sr(nor, nor->bouncebuf); + if (ret) + return ret; + + nor->erase_opcode = XILINX_OP_SE; + nor->program_opcode = XILINX_OP_PP; + nor->read_opcode = SPINOR_OP_READ; + nor->flags |= SNOR_F_NO_OP_CHIP_ERASE; + + /* + * This flashes have a page size of 264 or 528 bytes (known as + * Default addressing mode). It can be changed to a more standard + * Power of two mode where the page size is 256/512. This comes + * with a price: there is 3% less of space, the data is corrupted + * and the page size cannot be changed back to default addressing + * mode. + * + * The current addressing mode can be read from the XRDSR register + * and should not be changed, because is a destructive operation. + */ + if (nor->bouncebuf[0] & XSR_PAGESIZE) { + /* Flash in Power of 2 mode */ + page_size = (nor->params->page_size == 264) ? 256 : 512; + nor->params->page_size = page_size; + nor->mtd.writebufsize = page_size; + nor->params->size = 8 * page_size * nor->info->n_sectors; + nor->mtd.erasesize = 8 * page_size; + } else { + /* Flash in Default addressing mode */ + nor->params->convert_addr = s3an_nor_convert_addr; + nor->mtd.erasesize = nor->info->sector_size; + } + + return 0; +} + +static int xilinx_nor_late_init(struct spi_nor *nor) +{ + nor->params->setup = xilinx_nor_setup; + nor->params->ready = xilinx_nor_sr_ready; + + return 0; +} + +static const struct spi_nor_fixups xilinx_nor_fixups = { + .late_init = xilinx_nor_late_init, +}; + +const struct spi_nor_manufacturer spi_nor_xilinx = { + .name = "xilinx", + .parts = xilinx_nor_parts, + .nparts = ARRAY_SIZE(xilinx_nor_parts), + .fixups = &xilinx_nor_fixups, +}; -- cgit v1.2.3