From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- drivers/net/arcnet/Kconfig | 134 ++++ drivers/net/arcnet/Makefile | 16 + drivers/net/arcnet/arc-rawmode.c | 189 ++++++ drivers/net/arcnet/arc-rimi.c | 385 ++++++++++++ drivers/net/arcnet/arcdevice.h | 401 ++++++++++++ drivers/net/arcnet/arcnet.c | 1215 +++++++++++++++++++++++++++++++++++++ drivers/net/arcnet/capmode.c | 268 ++++++++ drivers/net/arcnet/com20020-isa.c | 229 +++++++ drivers/net/arcnet/com20020-pci.c | 618 +++++++++++++++++++ drivers/net/arcnet/com20020.c | 418 +++++++++++++ drivers/net/arcnet/com20020.h | 132 ++++ drivers/net/arcnet/com20020_cs.c | 329 ++++++++++ drivers/net/arcnet/com9026.h | 18 + drivers/net/arcnet/com90io.c | 426 +++++++++++++ drivers/net/arcnet/com90xx.c | 715 ++++++++++++++++++++++ drivers/net/arcnet/rfc1051.c | 242 ++++++++ drivers/net/arcnet/rfc1201.c | 547 +++++++++++++++++ 17 files changed, 6282 insertions(+) create mode 100644 drivers/net/arcnet/Kconfig create mode 100644 drivers/net/arcnet/Makefile create mode 100644 drivers/net/arcnet/arc-rawmode.c create mode 100644 drivers/net/arcnet/arc-rimi.c create mode 100644 drivers/net/arcnet/arcdevice.h create mode 100644 drivers/net/arcnet/arcnet.c create mode 100644 drivers/net/arcnet/capmode.c create mode 100644 drivers/net/arcnet/com20020-isa.c create mode 100644 drivers/net/arcnet/com20020-pci.c create mode 100644 drivers/net/arcnet/com20020.c create mode 100644 drivers/net/arcnet/com20020.h create mode 100644 drivers/net/arcnet/com20020_cs.c create mode 100644 drivers/net/arcnet/com9026.h create mode 100644 drivers/net/arcnet/com90io.c create mode 100644 drivers/net/arcnet/com90xx.c create mode 100644 drivers/net/arcnet/rfc1051.c create mode 100644 drivers/net/arcnet/rfc1201.c (limited to 'drivers/net/arcnet') diff --git a/drivers/net/arcnet/Kconfig b/drivers/net/arcnet/Kconfig new file mode 100644 index 000000000..a51b9dab6 --- /dev/null +++ b/drivers/net/arcnet/Kconfig @@ -0,0 +1,134 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Arcnet configuration +# + +menuconfig ARCNET + depends on NETDEVICES && (ISA || PCI || PCMCIA) + tristate "ARCnet support" + help + If you have a network card of this type, say Y and check out the + (arguably) beautiful poetry in + . + + You need both this driver, and the driver for the particular ARCnet + chipset of your card. If you don't know, then it's probably a + COM90xx type card, so say Y (or M) to "ARCnet COM90xx chipset + support" below. + + To compile this driver as a module, choose M here. The module will + be called arcnet. + +if ARCNET + +config ARCNET_1201 + tristate "Enable standard ARCNet packet format (RFC 1201)" + help + This allows you to use RFC1201 with your ARCnet card via the virtual + arc0 device. You need to say Y here to communicate with + industry-standard RFC1201 implementations, like the arcether.com + packet driver or most DOS/Windows ODI drivers. Please read the + ARCnet documentation in + for more information about using arc0. + +config ARCNET_1051 + tristate "Enable old ARCNet packet format (RFC 1051)" + help + This allows you to use RFC1051 with your ARCnet card via the virtual + arc0s device. You only need arc0s if you want to talk to ARCnet + software complying with the "old" standard, specifically, the DOS + arcnet.com packet driver, Amigas running AmiTCP, and some variants + of NetBSD. You do not need to say Y here to communicate with + industry-standard RFC1201 implementations, like the arcether.com + packet driver or most DOS/Windows ODI drivers. RFC1201 is included + automatically as the arc0 device. Please read the ARCnet + documentation in for more + information about using arc0e and arc0s. + +config ARCNET_RAW + tristate "Enable raw mode packet interface" + help + ARCnet "raw mode" packet encapsulation, no soft headers. Unlikely + to work unless talking to a copy of the same Linux arcnet driver, + but perhaps marginally faster in that case. + +config ARCNET_CAP + tristate "Enable CAP mode packet interface" + help + ARCnet "cap mode" packet encapsulation. Used to get the hardware + acknowledge back to userspace. After the initial protocol byte every + packet is stuffed with an extra 4 byte "cookie" which doesn't + actually appear on the network. After transmit the driver will send + back a packet with protocol byte 0 containing the status of the + transmission: + 0=no hardware acknowledge + 1=excessive nak + 2=transmission accepted by the receiver hardware + + Received packets are also stuffed with the extra 4 bytes but it will + be random data. + + Cap only listens to protocol 1-8. + +config ARCNET_COM90xx + tristate "ARCnet COM90xx (normal) chipset driver" + help + This is the chipset driver for the standard COM90xx cards. If you + have always used the old ARCnet driver without knowing what type of + card you had, this is probably the one for you. + + To compile this driver as a module, choose M here. The module will + be called com90xx. + +config ARCNET_COM90xxIO + tristate "ARCnet COM90xx (IO mapped) chipset driver" + help + This is the chipset driver for the COM90xx cards, using them in + IO-mapped mode instead of memory-mapped mode. This is slower than + the normal driver. Only use it if your card doesn't support shared + memory. + + To compile this driver as a module, choose M here. The module will + be called com90io. + +config ARCNET_RIM_I + tristate "ARCnet COM90xx (RIM I) chipset driver" + help + This is yet another chipset driver for the COM90xx cards, but this + time only using memory-mapped mode, and no IO ports at all. This + driver is completely untested, so if you have one of these cards, + please mail , especially if it works! + + To compile this driver as a module, choose M here. The module will + be called arc-rimi. + +config ARCNET_COM20020 + tristate "ARCnet COM20020 chipset driver" + depends on LEDS_CLASS + help + This is the driver for the new COM20020 chipset. It supports such + things as promiscuous mode, so packet sniffing is possible, and + extra diagnostic information. + + To compile this driver as a module, choose M here. The module will + be called com20020. + +config ARCNET_COM20020_ISA + tristate "Support for COM20020 on ISA" + depends on ARCNET_COM20020 && ISA + +config ARCNET_COM20020_PCI + tristate "Support for COM20020 on PCI" + depends on ARCNET_COM20020 && PCI + +config ARCNET_COM20020_CS + tristate "COM20020 ARCnet PCMCIA support" + depends on ARCNET_COM20020 && PCMCIA + help + Say Y here if you intend to attach this type of ARCnet PCMCIA card + to your computer. + + To compile this driver as a module, choose M here: the module will be + called com20020_cs. If unsure, say N. + +endif # ARCNET diff --git a/drivers/net/arcnet/Makefile b/drivers/net/arcnet/Makefile new file mode 100644 index 000000000..53525e8ea --- /dev/null +++ b/drivers/net/arcnet/Makefile @@ -0,0 +1,16 @@ +# SPDX-License-Identifier: GPL-2.0 +# Makefile for linux/drivers/net/arcnet +# + +obj-$(CONFIG_ARCNET) += arcnet.o +obj-$(CONFIG_ARCNET_1201) += rfc1201.o +obj-$(CONFIG_ARCNET_1051) += rfc1051.o +obj-$(CONFIG_ARCNET_RAW) += arc-rawmode.o +obj-$(CONFIG_ARCNET_CAP) += capmode.o +obj-$(CONFIG_ARCNET_COM90xx) += com90xx.o +obj-$(CONFIG_ARCNET_COM90xxIO) += com90io.o +obj-$(CONFIG_ARCNET_RIM_I) += arc-rimi.o +obj-$(CONFIG_ARCNET_COM20020) += com20020.o +obj-$(CONFIG_ARCNET_COM20020_ISA) += com20020-isa.o +obj-$(CONFIG_ARCNET_COM20020_PCI) += com20020-pci.o +obj-$(CONFIG_ARCNET_COM20020_CS) += com20020_cs.o diff --git a/drivers/net/arcnet/arc-rawmode.c b/drivers/net/arcnet/arc-rawmode.c new file mode 100644 index 000000000..8c651fdee --- /dev/null +++ b/drivers/net/arcnet/arc-rawmode.c @@ -0,0 +1,189 @@ +/* + * Linux ARCnet driver - "raw mode" packet encapsulation (no soft headers) + * + * Written 1994-1999 by Avery Pennarun. + * Derived from skeleton.c by Donald Becker. + * + * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com) + * for sponsoring the further development of this driver. + * + * ********************** + * + * The original copyright of skeleton.c was as follows: + * + * skeleton.c Written 1993 by Donald Becker. + * Copyright 1993 United States Government as represented by the + * Director, National Security Agency. This software may only be used + * and distributed according to the terms of the GNU General Public License as + * modified by SRC, incorporated herein by reference. + * + * ********************** + * + * For more details, see drivers/net/arcnet.c + * + * ********************** + */ + +#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include "arcdevice.h" + +/* packet receiver */ +static void rx(struct net_device *dev, int bufnum, + struct archdr *pkthdr, int length) +{ + struct arcnet_local *lp = netdev_priv(dev); + struct sk_buff *skb; + struct archdr *pkt = pkthdr; + int ofs; + + arc_printk(D_DURING, dev, "it's a raw packet (length=%d)\n", length); + + if (length > MTU) + ofs = 512 - length; + else + ofs = 256 - length; + + skb = alloc_skb(length + ARC_HDR_SIZE, GFP_ATOMIC); + if (!skb) { + dev->stats.rx_dropped++; + return; + } + skb_put(skb, length + ARC_HDR_SIZE); + skb->dev = dev; + + pkt = (struct archdr *)skb->data; + + skb_reset_mac_header(skb); + skb_pull(skb, ARC_HDR_SIZE); + + /* up to sizeof(pkt->soft) has already been copied from the card */ + memcpy(pkt, pkthdr, sizeof(struct archdr)); + if (length > sizeof(pkt->soft)) + lp->hw.copy_from_card(dev, bufnum, ofs + sizeof(pkt->soft), + pkt->soft.raw + sizeof(pkt->soft), + length - sizeof(pkt->soft)); + + if (BUGLVL(D_SKB)) + arcnet_dump_skb(dev, skb, "rx"); + + skb->protocol = cpu_to_be16(ETH_P_ARCNET); + netif_rx(skb); +} + +/* Create the ARCnet hard/soft headers for raw mode. + * There aren't any soft headers in raw mode - not even the protocol id. + */ +static int build_header(struct sk_buff *skb, struct net_device *dev, + unsigned short type, uint8_t daddr) +{ + int hdr_size = ARC_HDR_SIZE; + struct archdr *pkt = skb_push(skb, hdr_size); + + /* Set the source hardware address. + * + * This is pretty pointless for most purposes, but it can help in + * debugging. ARCnet does not allow us to change the source address + * in the actual packet sent. + */ + pkt->hard.source = *dev->dev_addr; + + /* see linux/net/ethernet/eth.c to see where I got the following */ + + if (dev->flags & (IFF_LOOPBACK | IFF_NOARP)) { + /* FIXME: fill in the last byte of the dest ipaddr here + * to better comply with RFC1051 in "noarp" mode. + */ + pkt->hard.dest = 0; + return hdr_size; + } + /* otherwise, just fill it in and go! */ + pkt->hard.dest = daddr; + + return hdr_size; /* success */ +} + +static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length, + int bufnum) +{ + struct arcnet_local *lp = netdev_priv(dev); + struct arc_hardware *hard = &pkt->hard; + int ofs; + + arc_printk(D_DURING, dev, "prepare_tx: txbufs=%d/%d/%d\n", + lp->next_tx, lp->cur_tx, bufnum); + + /* hard header is not included in packet length */ + length -= ARC_HDR_SIZE; + + if (length > XMTU) { + /* should never happen! other people already check for this. */ + arc_printk(D_NORMAL, dev, "Bug! prepare_tx with size %d (> %d)\n", + length, XMTU); + length = XMTU; + } + if (length >= MinTU) { + hard->offset[0] = 0; + hard->offset[1] = ofs = 512 - length; + } else if (length > MTU) { + hard->offset[0] = 0; + hard->offset[1] = ofs = 512 - length - 3; + } else { + hard->offset[0] = ofs = 256 - length; + } + + arc_printk(D_DURING, dev, "prepare_tx: length=%d ofs=%d\n", + length, ofs); + + lp->hw.copy_to_card(dev, bufnum, 0, hard, ARC_HDR_SIZE); + lp->hw.copy_to_card(dev, bufnum, ofs, &pkt->soft, length); + + lp->lastload_dest = hard->dest; + + return 1; /* done */ +} + +static struct ArcProto rawmode_proto = { + .suffix = 'r', + .mtu = XMTU, + .rx = rx, + .build_header = build_header, + .prepare_tx = prepare_tx, + .continue_tx = NULL, + .ack_tx = NULL +}; + +static int __init arcnet_raw_init(void) +{ + int count; + + pr_info("raw mode (`r') encapsulation support loaded\n"); + + for (count = 0; count < 256; count++) + if (arc_proto_map[count] == arc_proto_default) + arc_proto_map[count] = &rawmode_proto; + + /* for raw mode, we only set the bcast proto if there's no better one */ + if (arc_bcast_proto == arc_proto_default) + arc_bcast_proto = &rawmode_proto; + + arc_proto_default = &rawmode_proto; + return 0; +} + +static void __exit arcnet_raw_exit(void) +{ + arcnet_unregister_proto(&rawmode_proto); +} + +module_init(arcnet_raw_init); +module_exit(arcnet_raw_exit); + +MODULE_LICENSE("GPL"); diff --git a/drivers/net/arcnet/arc-rimi.c b/drivers/net/arcnet/arc-rimi.c new file mode 100644 index 000000000..8c3ccc7c8 --- /dev/null +++ b/drivers/net/arcnet/arc-rimi.c @@ -0,0 +1,385 @@ +/* + * Linux ARCnet driver - "RIM I" (entirely mem-mapped) cards + * + * Written 1994-1999 by Avery Pennarun. + * Written 1999-2000 by Martin Mares . + * Derived from skeleton.c by Donald Becker. + * + * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com) + * for sponsoring the further development of this driver. + * + * ********************** + * + * The original copyright of skeleton.c was as follows: + * + * skeleton.c Written 1993 by Donald Becker. + * Copyright 1993 United States Government as represented by the + * Director, National Security Agency. This software may only be used + * and distributed according to the terms of the GNU General Public License as + * modified by SRC, incorporated herein by reference. + * + * ********************** + * + * For more details, see drivers/net/arcnet.c + * + * ********************** + */ + +#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "arcdevice.h" +#include "com9026.h" + +/* Internal function declarations */ + +static int arcrimi_probe(struct net_device *dev); +static int arcrimi_found(struct net_device *dev); +static void arcrimi_command(struct net_device *dev, int command); +static int arcrimi_status(struct net_device *dev); +static void arcrimi_setmask(struct net_device *dev, int mask); +static int arcrimi_reset(struct net_device *dev, int really_reset); +static void arcrimi_copy_to_card(struct net_device *dev, int bufnum, int offset, + void *buf, int count); +static void arcrimi_copy_from_card(struct net_device *dev, int bufnum, + int offset, void *buf, int count); + +/* Handy defines for ARCnet specific stuff */ + +/* Amount of I/O memory used by the card */ +#define BUFFER_SIZE (512) +#define MIRROR_SIZE (BUFFER_SIZE * 4) + +/* We cannot probe for a RIM I card; one reason is I don't know how to reset + * them. In fact, we can't even get their node ID automatically. So, we + * need to be passed a specific shmem address, IRQ, and node ID. + */ +static int __init arcrimi_probe(struct net_device *dev) +{ + if (BUGLVL(D_NORMAL)) { + pr_info("%s\n", "RIM I (entirely mem-mapped) support"); + pr_info("E-mail me if you actually test the RIM I driver, please!\n"); + pr_info("Given: node %02Xh, shmem %lXh, irq %d\n", + dev->dev_addr[0], dev->mem_start, dev->irq); + } + + if (dev->mem_start <= 0 || dev->irq <= 0) { + if (BUGLVL(D_NORMAL)) + pr_err("No autoprobe for RIM I; you must specify the shmem and irq!\n"); + return -ENODEV; + } + if (dev->dev_addr[0] == 0) { + if (BUGLVL(D_NORMAL)) + pr_err("You need to specify your card's station ID!\n"); + return -ENODEV; + } + /* Grab the memory region at mem_start for MIRROR_SIZE bytes. + * Later in arcrimi_found() the real size will be determined + * and this reserve will be released and the correct size + * will be taken. + */ + if (!request_mem_region(dev->mem_start, MIRROR_SIZE, "arcnet (90xx)")) { + if (BUGLVL(D_NORMAL)) + pr_notice("Card memory already allocated\n"); + return -ENODEV; + } + return arcrimi_found(dev); +} + +static int check_mirror(unsigned long addr, size_t size) +{ + void __iomem *p; + int res = -1; + + if (!request_mem_region(addr, size, "arcnet (90xx)")) + return -1; + + p = ioremap(addr, size); + if (p) { + if (arcnet_readb(p, COM9026_REG_R_STATUS) == TESTvalue) + res = 1; + else + res = 0; + iounmap(p); + } + + release_mem_region(addr, size); + return res; +} + +/* Set up the struct net_device associated with this card. + * Called after probing succeeds. + */ +static int __init arcrimi_found(struct net_device *dev) +{ + struct arcnet_local *lp; + unsigned long first_mirror, last_mirror, shmem; + void __iomem *p; + int mirror_size; + int err; + + p = ioremap(dev->mem_start, MIRROR_SIZE); + if (!p) { + release_mem_region(dev->mem_start, MIRROR_SIZE); + arc_printk(D_NORMAL, dev, "Can't ioremap\n"); + return -ENODEV; + } + + /* reserve the irq */ + if (request_irq(dev->irq, arcnet_interrupt, 0, "arcnet (RIM I)", dev)) { + iounmap(p); + release_mem_region(dev->mem_start, MIRROR_SIZE); + arc_printk(D_NORMAL, dev, "Can't get IRQ %d!\n", dev->irq); + return -ENODEV; + } + + shmem = dev->mem_start; + arcnet_writeb(TESTvalue, p, COM9026_REG_W_INTMASK); + arcnet_writeb(TESTvalue, p, COM9026_REG_W_COMMAND); + /* actually the station/node ID */ + + /* find the real shared memory start/end points, including mirrors */ + + /* guess the actual size of one "memory mirror" - the number of + * bytes between copies of the shared memory. On most cards, it's + * 2k (or there are no mirrors at all) but on some, it's 4k. + */ + mirror_size = MIRROR_SIZE; + if (arcnet_readb(p, COM9026_REG_R_STATUS) == TESTvalue && + check_mirror(shmem - MIRROR_SIZE, MIRROR_SIZE) == 0 && + check_mirror(shmem - 2 * MIRROR_SIZE, MIRROR_SIZE) == 1) + mirror_size = 2 * MIRROR_SIZE; + + first_mirror = shmem - mirror_size; + while (check_mirror(first_mirror, mirror_size) == 1) + first_mirror -= mirror_size; + first_mirror += mirror_size; + + last_mirror = shmem + mirror_size; + while (check_mirror(last_mirror, mirror_size) == 1) + last_mirror += mirror_size; + last_mirror -= mirror_size; + + dev->mem_start = first_mirror; + dev->mem_end = last_mirror + MIRROR_SIZE - 1; + + /* initialize the rest of the device structure. */ + + lp = netdev_priv(dev); + lp->card_name = "RIM I"; + lp->hw.command = arcrimi_command; + lp->hw.status = arcrimi_status; + lp->hw.intmask = arcrimi_setmask; + lp->hw.reset = arcrimi_reset; + lp->hw.owner = THIS_MODULE; + lp->hw.copy_to_card = arcrimi_copy_to_card; + lp->hw.copy_from_card = arcrimi_copy_from_card; + + /* re-reserve the memory region - arcrimi_probe() alloced this reqion + * but didn't know the real size. Free that region and then re-get + * with the correct size. There is a VERY slim chance this could + * fail. + */ + iounmap(p); + release_mem_region(shmem, MIRROR_SIZE); + if (!request_mem_region(dev->mem_start, + dev->mem_end - dev->mem_start + 1, + "arcnet (90xx)")) { + arc_printk(D_NORMAL, dev, "Card memory already allocated\n"); + goto err_free_irq; + } + + lp->mem_start = ioremap(dev->mem_start, + dev->mem_end - dev->mem_start + 1); + if (!lp->mem_start) { + arc_printk(D_NORMAL, dev, "Can't remap device memory!\n"); + goto err_release_mem; + } + + /* get and check the station ID from offset 1 in shmem */ + arcnet_set_addr(dev, arcnet_readb(lp->mem_start, + COM9026_REG_R_STATION)); + + arc_printk(D_NORMAL, dev, "ARCnet RIM I: station %02Xh found at IRQ %d, ShMem %lXh (%ld*%d bytes)\n", + dev->dev_addr[0], + dev->irq, dev->mem_start, + (dev->mem_end - dev->mem_start + 1) / mirror_size, + mirror_size); + + err = register_netdev(dev); + if (err) + goto err_unmap; + + return 0; + +err_unmap: + iounmap(lp->mem_start); +err_release_mem: + release_mem_region(dev->mem_start, dev->mem_end - dev->mem_start + 1); +err_free_irq: + free_irq(dev->irq, dev); + return -EIO; +} + +/* Do a hardware reset on the card, and set up necessary registers. + * + * This should be called as little as possible, because it disrupts the + * token on the network (causes a RECON) and requires a significant delay. + * + * However, it does make sure the card is in a defined state. + */ +static int arcrimi_reset(struct net_device *dev, int really_reset) +{ + struct arcnet_local *lp = netdev_priv(dev); + void __iomem *ioaddr = lp->mem_start + 0x800; + + arc_printk(D_INIT, dev, "Resetting %s (status=%02Xh)\n", + dev->name, arcnet_readb(ioaddr, COM9026_REG_R_STATUS)); + + if (really_reset) { + arcnet_writeb(TESTvalue, ioaddr, -0x800); /* fake reset */ + return 0; + } + /* clear flags & end reset */ + arcnet_writeb(CFLAGScmd | RESETclear, ioaddr, COM9026_REG_W_COMMAND); + arcnet_writeb(CFLAGScmd | CONFIGclear, ioaddr, COM9026_REG_W_COMMAND); + + /* enable extended (512-byte) packets */ + arcnet_writeb(CONFIGcmd | EXTconf, ioaddr, COM9026_REG_W_COMMAND); + + /* done! return success. */ + return 0; +} + +static void arcrimi_setmask(struct net_device *dev, int mask) +{ + struct arcnet_local *lp = netdev_priv(dev); + void __iomem *ioaddr = lp->mem_start + 0x800; + + arcnet_writeb(mask, ioaddr, COM9026_REG_W_INTMASK); +} + +static int arcrimi_status(struct net_device *dev) +{ + struct arcnet_local *lp = netdev_priv(dev); + void __iomem *ioaddr = lp->mem_start + 0x800; + + return arcnet_readb(ioaddr, COM9026_REG_R_STATUS); +} + +static void arcrimi_command(struct net_device *dev, int cmd) +{ + struct arcnet_local *lp = netdev_priv(dev); + void __iomem *ioaddr = lp->mem_start + 0x800; + + arcnet_writeb(cmd, ioaddr, COM9026_REG_W_COMMAND); +} + +static void arcrimi_copy_to_card(struct net_device *dev, int bufnum, int offset, + void *buf, int count) +{ + struct arcnet_local *lp = netdev_priv(dev); + void __iomem *memaddr = lp->mem_start + 0x800 + bufnum * 512 + offset; + + TIME(dev, "memcpy_toio", count, memcpy_toio(memaddr, buf, count)); +} + +static void arcrimi_copy_from_card(struct net_device *dev, int bufnum, + int offset, void *buf, int count) +{ + struct arcnet_local *lp = netdev_priv(dev); + void __iomem *memaddr = lp->mem_start + 0x800 + bufnum * 512 + offset; + + TIME(dev, "memcpy_fromio", count, memcpy_fromio(buf, memaddr, count)); +} + +static int node; +static int io; /* use the insmod io= irq= node= options */ +static int irq; +static char device[9]; /* use eg. device=arc1 to change name */ + +module_param(node, int, 0); +module_param(io, int, 0); +module_param(irq, int, 0); +module_param_string(device, device, sizeof(device), 0); +MODULE_LICENSE("GPL"); + +static struct net_device *my_dev; + +static int __init arc_rimi_init(void) +{ + struct net_device *dev; + + dev = alloc_arcdev(device); + if (!dev) + return -ENOMEM; + + if (node && node != 0xff) + arcnet_set_addr(dev, node); + + dev->mem_start = io; + dev->irq = irq; + if (dev->irq == 2) + dev->irq = 9; + + if (arcrimi_probe(dev)) { + free_arcdev(dev); + return -EIO; + } + + my_dev = dev; + return 0; +} + +static void __exit arc_rimi_exit(void) +{ + struct net_device *dev = my_dev; + struct arcnet_local *lp = netdev_priv(dev); + + unregister_netdev(dev); + iounmap(lp->mem_start); + release_mem_region(dev->mem_start, dev->mem_end - dev->mem_start + 1); + free_irq(dev->irq, dev); + free_arcdev(dev); +} + +#ifndef MODULE +static int __init arcrimi_setup(char *s) +{ + int ints[8]; + + s = get_options(s, 8, ints); + if (!ints[0]) + return 1; + switch (ints[0]) { + default: /* ERROR */ + pr_err("Too many arguments\n"); + fallthrough; + case 3: /* Node ID */ + node = ints[3]; + fallthrough; + case 2: /* IRQ */ + irq = ints[2]; + fallthrough; + case 1: /* IO address */ + io = ints[1]; + } + if (*s) + snprintf(device, sizeof(device), "%s", s); + return 1; +} +__setup("arcrimi=", arcrimi_setup); +#endif /* MODULE */ + +module_init(arc_rimi_init) +module_exit(arc_rimi_exit) diff --git a/drivers/net/arcnet/arcdevice.h b/drivers/net/arcnet/arcdevice.h new file mode 100644 index 000000000..b54275389 --- /dev/null +++ b/drivers/net/arcnet/arcdevice.h @@ -0,0 +1,401 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * INET An implementation of the TCP/IP protocol suite for the LINUX + * operating system. NET is implemented using the BSD Socket + * interface as the means of communication with the user level. + * + * Definitions used by the ARCnet driver. + * + * Authors: Avery Pennarun and David Woodhouse + */ +#ifndef _LINUX_ARCDEVICE_H +#define _LINUX_ARCDEVICE_H + +#include +#include + +#ifdef __KERNEL__ +#include + +/* + * RECON_THRESHOLD is the maximum number of RECON messages to receive + * within one minute before printing a "cabling problem" warning. The + * default value should be fine. + * + * After that, a "cabling restored" message will be printed on the next IRQ + * if no RECON messages have been received for 10 seconds. + * + * Do not define RECON_THRESHOLD at all if you want to disable this feature. + */ +#define RECON_THRESHOLD 30 + +/* + * Define this to the minimum "timeout" value. If a transmit takes longer + * than TX_TIMEOUT jiffies, Linux will abort the TX and retry. On a large + * network, or one with heavy network traffic, this timeout may need to be + * increased. The larger it is, though, the longer it will be between + * necessary transmits - don't set this too high. + */ +#define TX_TIMEOUT (HZ * 200 / 1000) + +/* Display warnings about the driver being an ALPHA version. */ +#undef ALPHA_WARNING + +/* + * Debugging bitflags: each option can be enabled individually. + * + * Note: only debug flags included in the ARCNET_DEBUG_MAX define will + * actually be available. GCC will (at least, GCC 2.7.0 will) notice + * lines using a BUGLVL not in ARCNET_DEBUG_MAX and automatically optimize + * them out. + */ +#define D_NORMAL 1 /* important operational info */ +#define D_EXTRA 2 /* useful, but non-vital information */ +#define D_INIT 4 /* show init/probe messages */ +#define D_INIT_REASONS 8 /* show reasons for discarding probes */ +#define D_RECON 32 /* print a message whenever token is lost */ +#define D_PROTO 64 /* debug auto-protocol support */ +/* debug levels below give LOTS of output during normal operation! */ +#define D_DURING 128 /* trace operations (including irq's) */ +#define D_TX 256 /* show tx packets */ +#define D_RX 512 /* show rx packets */ +#define D_SKB 1024 /* show skb's */ +#define D_SKB_SIZE 2048 /* show skb sizes */ +#define D_TIMING 4096 /* show time needed to copy buffers to card */ +#define D_DEBUG 8192 /* Very detailed debug line for line */ + +#ifndef ARCNET_DEBUG_MAX +#define ARCNET_DEBUG_MAX (127) /* change to ~0 if you want detailed debugging */ +#endif + +#ifndef ARCNET_DEBUG +#define ARCNET_DEBUG (D_NORMAL | D_EXTRA) +#endif +extern int arcnet_debug; + +#define BUGLVL(x) ((x) & ARCNET_DEBUG_MAX & arcnet_debug) + +/* macros to simplify debug checking */ +#define arc_printk(x, dev, fmt, ...) \ +do { \ + if (BUGLVL(x)) { \ + if ((x) == D_NORMAL) \ + netdev_warn(dev, fmt, ##__VA_ARGS__); \ + else if ((x) < D_DURING) \ + netdev_info(dev, fmt, ##__VA_ARGS__); \ + else \ + netdev_dbg(dev, fmt, ##__VA_ARGS__); \ + } \ +} while (0) + +#define arc_cont(x, fmt, ...) \ +do { \ + if (BUGLVL(x)) \ + pr_cont(fmt, ##__VA_ARGS__); \ +} while (0) + +/* see how long a function call takes to run, expressed in CPU cycles */ +#define TIME(dev, name, bytes, call) \ +do { \ + if (BUGLVL(D_TIMING)) { \ + unsigned long _x, _y; \ + _x = get_cycles(); \ + call; \ + _y = get_cycles(); \ + arc_printk(D_TIMING, dev, \ + "%s: %d bytes in %lu cycles == %lu Kbytes/100Mcycle\n", \ + name, bytes, _y - _x, \ + 100000000 / 1024 * bytes / (_y - _x + 1)); \ + } else { \ + call; \ + } \ +} while (0) + +/* + * Time needed to reset the card - in ms (milliseconds). This works on my + * SMC PC100. I can't find a reference that tells me just how long I + * should wait. + */ +#define RESETtime (300) + +/* + * These are the max/min lengths of packet payload, not including the + * arc_hardware header, but definitely including the soft header. + * + * Note: packet sizes 254, 255, 256 are impossible because of the way + * ARCnet registers work That's why RFC1201 defines "exception" packets. + * In non-RFC1201 protocols, we have to just tack some extra bytes on the + * end. + */ +#define MTU 253 /* normal packet max size */ +#define MinTU 257 /* extended packet min size */ +#define XMTU 508 /* extended packet max size */ + +/* status/interrupt mask bit fields */ +#define TXFREEflag 0x01 /* transmitter available */ +#define TXACKflag 0x02 /* transmitted msg. ackd */ +#define RECONflag 0x04 /* network reconfigured */ +#define TESTflag 0x08 /* test flag */ +#define EXCNAKflag 0x08 /* excesive nak flag */ +#define RESETflag 0x10 /* power-on-reset */ +#define RES1flag 0x20 /* reserved - usually set by jumper */ +#define RES2flag 0x40 /* reserved - usually set by jumper */ +#define NORXflag 0x80 /* receiver inhibited */ + +/* Flags used for IO-mapped memory operations */ +#define AUTOINCflag 0x40 /* Increase location with each access */ +#define IOMAPflag 0x02 /* (for 90xx) Use IO mapped memory, not mmap */ +#define ENABLE16flag 0x80 /* (for 90xx) Enable 16-bit mode */ + +/* in the command register, the following bits have these meanings: + * 0-2 command + * 3-4 page number (for enable rcv/xmt command) + * 7 receive broadcasts + */ +#define NOTXcmd 0x01 /* disable transmitter */ +#define NORXcmd 0x02 /* disable receiver */ +#define TXcmd 0x03 /* enable transmitter */ +#define RXcmd 0x04 /* enable receiver */ +#define CONFIGcmd 0x05 /* define configuration */ +#define CFLAGScmd 0x06 /* clear flags */ +#define TESTcmd 0x07 /* load test flags */ +#define STARTIOcmd 0x18 /* start internal operation */ + +/* flags for "clear flags" command */ +#define RESETclear 0x08 /* power-on-reset */ +#define CONFIGclear 0x10 /* system reconfigured */ + +#define EXCNAKclear 0x0E /* Clear and acknowledge the excive nak bit */ + +/* flags for "load test flags" command */ +#define TESTload 0x08 /* test flag (diagnostic) */ + +/* byte deposited into first address of buffers on reset */ +#define TESTvalue 0321 /* that's octal for 0xD1 :) */ + +/* for "enable receiver" command */ +#define RXbcasts 0x80 /* receive broadcasts */ + +/* flags for "define configuration" command */ +#define NORMALconf 0x00 /* 1-249 byte packets */ +#define EXTconf 0x08 /* 250-504 byte packets */ + +/* card feature flags, set during auto-detection. + * (currently only used by com20020pci) + */ +#define ARC_IS_5MBIT 1 /* card default speed is 5MBit */ +#define ARC_CAN_10MBIT 2 /* card uses COM20022, supporting 10MBit, + but default is 2.5MBit. */ +#define ARC_HAS_LED 4 /* card has software controlled LEDs */ +#define ARC_HAS_ROTARY 8 /* card has rotary encoder */ + +/* information needed to define an encapsulation driver */ +struct ArcProto { + char suffix; /* a for RFC1201, e for ether-encap, etc. */ + int mtu; /* largest possible packet */ + int is_ip; /* This is a ip plugin - not a raw thing */ + + void (*rx)(struct net_device *dev, int bufnum, + struct archdr *pkthdr, int length); + int (*build_header)(struct sk_buff *skb, struct net_device *dev, + unsigned short ethproto, uint8_t daddr); + + /* these functions return '1' if the skb can now be freed */ + int (*prepare_tx)(struct net_device *dev, struct archdr *pkt, + int length, int bufnum); + int (*continue_tx)(struct net_device *dev, int bufnum); + int (*ack_tx)(struct net_device *dev, int acked); +}; + +extern struct ArcProto *arc_proto_map[256], *arc_proto_default, + *arc_bcast_proto, *arc_raw_proto; + +/* + * "Incoming" is information needed for each address that could be sending + * to us. Mostly for partially-received split packets. + */ +struct Incoming { + struct sk_buff *skb; /* packet data buffer */ + __be16 sequence; /* sequence number of assembly */ + uint8_t lastpacket, /* number of last packet (from 1) */ + numpackets; /* number of packets in split */ +}; + +/* only needed for RFC1201 */ +struct Outgoing { + struct ArcProto *proto; /* protocol driver that owns this: + * if NULL, no packet is pending. + */ + struct sk_buff *skb; /* buffer from upper levels */ + struct archdr *pkt; /* a pointer into the skb */ + uint16_t length, /* bytes total */ + dataleft, /* bytes left */ + segnum, /* segment being sent */ + numsegs; /* number of segments */ +}; + +#define ARCNET_LED_NAME_SZ (IFNAMSIZ + 6) + +struct arcnet_local { + uint8_t config, /* current value of CONFIG register */ + timeout, /* Extended timeout for COM20020 */ + backplane, /* Backplane flag for COM20020 */ + clockp, /* COM20020 clock divider */ + clockm, /* COM20020 clock multiplier flag */ + setup, /* Contents of setup1 register */ + setup2, /* Contents of setup2 register */ + intmask; /* current value of INTMASK register */ + uint8_t default_proto[256]; /* default encap to use for each host */ + int cur_tx, /* buffer used by current transmit, or -1 */ + next_tx, /* buffer where a packet is ready to send */ + cur_rx; /* current receive buffer */ + int lastload_dest, /* can last loaded packet be acked? */ + lasttrans_dest; /* can last TX'd packet be acked? */ + int timed_out; /* need to process TX timeout and drop packet */ + unsigned long last_timeout; /* time of last reported timeout */ + char *card_name; /* card ident string */ + int card_flags; /* special card features */ + + /* On preemtive and SMB a lock is needed */ + spinlock_t lock; + + struct led_trigger *tx_led_trig; + char tx_led_trig_name[ARCNET_LED_NAME_SZ]; + struct led_trigger *recon_led_trig; + char recon_led_trig_name[ARCNET_LED_NAME_SZ]; + + struct timer_list timer; + + struct net_device *dev; + int reply_status; + struct tasklet_struct reply_tasklet; + + /* + * Buffer management: an ARCnet card has 4 x 512-byte buffers, each of + * which can be used for either sending or receiving. The new dynamic + * buffer management routines use a simple circular queue of available + * buffers, and take them as they're needed. This way, we simplify + * situations in which we (for example) want to pre-load a transmit + * buffer, or start receiving while we copy a received packet to + * memory. + * + * The rules: only the interrupt handler is allowed to _add_ buffers to + * the queue; thus, this doesn't require a lock. Both the interrupt + * handler and the transmit function will want to _remove_ buffers, so + * we need to handle the situation where they try to do it at the same + * time. + * + * If next_buf == first_free_buf, the queue is empty. Since there are + * only four possible buffers, the queue should never be full. + */ + atomic_t buf_lock; + int buf_queue[5]; + int next_buf, first_free_buf; + + /* network "reconfiguration" handling */ + unsigned long first_recon; /* time of "first" RECON message to count */ + unsigned long last_recon; /* time of most recent RECON */ + int num_recons; /* number of RECONs between first and last. */ + int network_down; /* do we think the network is down? */ + + int excnak_pending; /* We just got an excesive nak interrupt */ + + /* RESET flag handling */ + int reset_in_progress; + struct work_struct reset_work; + + struct { + uint16_t sequence; /* sequence number (incs with each packet) */ + __be16 aborted_seq; + + struct Incoming incoming[256]; /* one from each address */ + } rfc1201; + + /* really only used by rfc1201, but we'll pretend it's not */ + struct Outgoing outgoing; /* packet currently being sent */ + + /* hardware-specific functions */ + struct { + struct module *owner; + void (*command)(struct net_device *dev, int cmd); + int (*status)(struct net_device *dev); + void (*intmask)(struct net_device *dev, int mask); + int (*reset)(struct net_device *dev, int really_reset); + void (*open)(struct net_device *dev); + void (*close)(struct net_device *dev); + void (*datatrigger) (struct net_device * dev, int enable); + void (*recontrigger) (struct net_device * dev, int enable); + + void (*copy_to_card)(struct net_device *dev, int bufnum, + int offset, void *buf, int count); + void (*copy_from_card)(struct net_device *dev, int bufnum, + int offset, void *buf, int count); + } hw; + + void __iomem *mem_start; /* pointer to ioremap'ed MMIO */ +}; + +enum arcnet_led_event { + ARCNET_LED_EVENT_RECON, + ARCNET_LED_EVENT_OPEN, + ARCNET_LED_EVENT_STOP, + ARCNET_LED_EVENT_TX, +}; + +void arcnet_led_event(struct net_device *netdev, enum arcnet_led_event event); +void devm_arcnet_led_init(struct net_device *netdev, int index, int subid); + +#if ARCNET_DEBUG_MAX & D_SKB +void arcnet_dump_skb(struct net_device *dev, struct sk_buff *skb, char *desc); +#else +static inline +void arcnet_dump_skb(struct net_device *dev, struct sk_buff *skb, char *desc) +{ +} +#endif + +void arcnet_unregister_proto(struct ArcProto *proto); +irqreturn_t arcnet_interrupt(int irq, void *dev_id); + +struct net_device *alloc_arcdev(const char *name); +void free_arcdev(struct net_device *dev); + +int arcnet_open(struct net_device *dev); +int arcnet_close(struct net_device *dev); +netdev_tx_t arcnet_send_packet(struct sk_buff *skb, + struct net_device *dev); +void arcnet_timeout(struct net_device *dev, unsigned int txqueue); + +static inline void arcnet_set_addr(struct net_device *dev, u8 addr) +{ + dev_addr_set(dev, &addr); +} + +/* I/O equivalents */ + +#ifdef CONFIG_SA1100_CT6001 +#define BUS_ALIGN 2 /* 8 bit device on a 16 bit bus - needs padding */ +#else +#define BUS_ALIGN 1 +#endif + +/* addr and offset allow register like names to define the actual IO address. + * A configuration option multiplies the offset for alignment. + */ +#define arcnet_inb(addr, offset) \ + inb((addr) + BUS_ALIGN * (offset)) +#define arcnet_outb(value, addr, offset) \ + outb(value, (addr) + BUS_ALIGN * (offset)) + +#define arcnet_insb(addr, offset, buffer, count) \ + insb((addr) + BUS_ALIGN * (offset), buffer, count) +#define arcnet_outsb(addr, offset, buffer, count) \ + outsb((addr) + BUS_ALIGN * (offset), buffer, count) + +#define arcnet_readb(addr, offset) \ + readb((addr) + (offset)) +#define arcnet_writeb(value, addr, offset) \ + writeb(value, (addr) + (offset)) + +#endif /* __KERNEL__ */ +#endif /* _LINUX_ARCDEVICE_H */ diff --git a/drivers/net/arcnet/arcnet.c b/drivers/net/arcnet/arcnet.c new file mode 100644 index 000000000..d9e052c49 --- /dev/null +++ b/drivers/net/arcnet/arcnet.c @@ -0,0 +1,1215 @@ +/* + * Linux ARCnet driver - device-independent routines + * + * Written 1997 by David Woodhouse. + * Written 1994-1999 by Avery Pennarun. + * Written 1999-2000 by Martin Mares . + * Derived from skeleton.c by Donald Becker. + * + * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com) + * for sponsoring the further development of this driver. + * + * ********************** + * + * The original copyright was as follows: + * + * skeleton.c Written 1993 by Donald Becker. + * Copyright 1993 United States Government as represented by the + * Director, National Security Agency. This software may only be used + * and distributed according to the terms of the GNU General Public License as + * modified by SRC, incorporated herein by reference. + * + * ********************** + * + * The change log is now in a file called ChangeLog in this directory. + * + * Sources: + * - Crynwr arcnet.com/arcether.com packet drivers. + * - arcnet.c v0.00 dated 1/1/94 and apparently by + * Donald Becker - it didn't work :) + * - skeleton.c v0.05 dated 11/16/93 by Donald Becker + * (from Linux Kernel 1.1.45) + * - RFC's 1201 and 1051 - re: TCP/IP over ARCnet + * - The official ARCnet COM9026 data sheets (!) thanks to + * Ken Cornetet + * - The official ARCnet COM20020 data sheets. + * - Information on some more obscure ARCnet controller chips, thanks + * to the nice people at SMSC. + * - net/inet/eth.c (from kernel 1.1.50) for header-building info. + * - Alternate Linux ARCnet source by V.Shergin + * - Textual information and more alternate source from Joachim Koenig + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "arcdevice.h" +#include "com9026.h" + +/* "do nothing" functions for protocol drivers */ +static void null_rx(struct net_device *dev, int bufnum, + struct archdr *pkthdr, int length); +static int null_build_header(struct sk_buff *skb, struct net_device *dev, + unsigned short type, uint8_t daddr); +static int null_prepare_tx(struct net_device *dev, struct archdr *pkt, + int length, int bufnum); + +static void arcnet_rx(struct net_device *dev, int bufnum); + +/* one ArcProto per possible proto ID. None of the elements of + * arc_proto_map are allowed to be NULL; they will get set to + * arc_proto_default instead. It also must not be NULL; if you would like + * to set it to NULL, set it to &arc_proto_null instead. + */ +struct ArcProto *arc_proto_map[256]; +EXPORT_SYMBOL(arc_proto_map); + +struct ArcProto *arc_proto_default; +EXPORT_SYMBOL(arc_proto_default); + +struct ArcProto *arc_bcast_proto; +EXPORT_SYMBOL(arc_bcast_proto); + +struct ArcProto *arc_raw_proto; +EXPORT_SYMBOL(arc_raw_proto); + +static struct ArcProto arc_proto_null = { + .suffix = '?', + .mtu = XMTU, + .is_ip = 0, + .rx = null_rx, + .build_header = null_build_header, + .prepare_tx = null_prepare_tx, + .continue_tx = NULL, + .ack_tx = NULL +}; + +/* Exported function prototypes */ +int arcnet_debug = ARCNET_DEBUG; +EXPORT_SYMBOL(arcnet_debug); + +/* Internal function prototypes */ +static int arcnet_header(struct sk_buff *skb, struct net_device *dev, + unsigned short type, const void *daddr, + const void *saddr, unsigned len); +static int go_tx(struct net_device *dev); + +static int debug = ARCNET_DEBUG; +module_param(debug, int, 0); +MODULE_LICENSE("GPL"); + +static int __init arcnet_init(void) +{ + int count; + + arcnet_debug = debug; + + pr_info("arcnet loaded\n"); + + /* initialize the protocol map */ + arc_raw_proto = arc_proto_default = arc_bcast_proto = &arc_proto_null; + for (count = 0; count < 256; count++) + arc_proto_map[count] = arc_proto_default; + + if (BUGLVL(D_DURING)) + pr_info("struct sizes: %zd %zd %zd %zd %zd\n", + sizeof(struct arc_hardware), + sizeof(struct arc_rfc1201), + sizeof(struct arc_rfc1051), + sizeof(struct arc_eth_encap), + sizeof(struct archdr)); + + return 0; +} + +static void __exit arcnet_exit(void) +{ +} + +module_init(arcnet_init); +module_exit(arcnet_exit); + +/* Dump the contents of an sk_buff */ +#if ARCNET_DEBUG_MAX & D_SKB +void arcnet_dump_skb(struct net_device *dev, + struct sk_buff *skb, char *desc) +{ + char hdr[32]; + + /* dump the packet */ + snprintf(hdr, sizeof(hdr), "%6s:%s skb->data:", dev->name, desc); + print_hex_dump(KERN_DEBUG, hdr, DUMP_PREFIX_OFFSET, + 16, 1, skb->data, skb->len, true); +} +EXPORT_SYMBOL(arcnet_dump_skb); +#endif + +/* Dump the contents of an ARCnet buffer */ +#if (ARCNET_DEBUG_MAX & (D_RX | D_TX)) +static void arcnet_dump_packet(struct net_device *dev, int bufnum, + char *desc, int take_arcnet_lock) +{ + struct arcnet_local *lp = netdev_priv(dev); + int i, length; + unsigned long flags = 0; + static uint8_t buf[512]; + char hdr[32]; + + /* hw.copy_from_card expects IRQ context so take the IRQ lock + * to keep it single threaded + */ + if (take_arcnet_lock) + spin_lock_irqsave(&lp->lock, flags); + + lp->hw.copy_from_card(dev, bufnum, 0, buf, 512); + if (take_arcnet_lock) + spin_unlock_irqrestore(&lp->lock, flags); + + /* if the offset[0] byte is nonzero, this is a 256-byte packet */ + length = (buf[2] ? 256 : 512); + + /* dump the packet */ + snprintf(hdr, sizeof(hdr), "%6s:%s packet dump:", dev->name, desc); + print_hex_dump(KERN_DEBUG, hdr, DUMP_PREFIX_OFFSET, + 16, 1, buf, length, true); +} + +#else + +#define arcnet_dump_packet(dev, bufnum, desc, take_arcnet_lock) do { } while (0) + +#endif + +/* Trigger a LED event in response to a ARCNET device event */ +void arcnet_led_event(struct net_device *dev, enum arcnet_led_event event) +{ + struct arcnet_local *lp = netdev_priv(dev); + + switch (event) { + case ARCNET_LED_EVENT_RECON: + led_trigger_blink_oneshot(lp->recon_led_trig, 350, 350, 0); + break; + case ARCNET_LED_EVENT_OPEN: + led_trigger_event(lp->tx_led_trig, LED_OFF); + led_trigger_event(lp->recon_led_trig, LED_OFF); + break; + case ARCNET_LED_EVENT_STOP: + led_trigger_event(lp->tx_led_trig, LED_OFF); + led_trigger_event(lp->recon_led_trig, LED_OFF); + break; + case ARCNET_LED_EVENT_TX: + led_trigger_blink_oneshot(lp->tx_led_trig, 50, 50, 0); + break; + } +} +EXPORT_SYMBOL_GPL(arcnet_led_event); + +static void arcnet_led_release(struct device *gendev, void *res) +{ + struct arcnet_local *lp = netdev_priv(to_net_dev(gendev)); + + led_trigger_unregister_simple(lp->tx_led_trig); + led_trigger_unregister_simple(lp->recon_led_trig); +} + +/* Register ARCNET LED triggers for a arcnet device + * + * This is normally called from a driver's probe function + */ +void devm_arcnet_led_init(struct net_device *netdev, int index, int subid) +{ + struct arcnet_local *lp = netdev_priv(netdev); + void *res; + + res = devres_alloc(arcnet_led_release, 0, GFP_KERNEL); + if (!res) { + netdev_err(netdev, "cannot register LED triggers\n"); + return; + } + + snprintf(lp->tx_led_trig_name, sizeof(lp->tx_led_trig_name), + "arc%d-%d-tx", index, subid); + snprintf(lp->recon_led_trig_name, sizeof(lp->recon_led_trig_name), + "arc%d-%d-recon", index, subid); + + led_trigger_register_simple(lp->tx_led_trig_name, + &lp->tx_led_trig); + led_trigger_register_simple(lp->recon_led_trig_name, + &lp->recon_led_trig); + + devres_add(&netdev->dev, res); +} +EXPORT_SYMBOL_GPL(devm_arcnet_led_init); + +/* Unregister a protocol driver from the arc_proto_map. Protocol drivers + * are responsible for registering themselves, but the unregister routine + * is pretty generic so we'll do it here. + */ +void arcnet_unregister_proto(struct ArcProto *proto) +{ + int count; + + if (arc_proto_default == proto) + arc_proto_default = &arc_proto_null; + if (arc_bcast_proto == proto) + arc_bcast_proto = arc_proto_default; + if (arc_raw_proto == proto) + arc_raw_proto = arc_proto_default; + + for (count = 0; count < 256; count++) { + if (arc_proto_map[count] == proto) + arc_proto_map[count] = arc_proto_default; + } +} +EXPORT_SYMBOL(arcnet_unregister_proto); + +/* Add a buffer to the queue. Only the interrupt handler is allowed to do + * this, unless interrupts are disabled. + * + * Note: we don't check for a full queue, since there aren't enough buffers + * to more than fill it. + */ +static void release_arcbuf(struct net_device *dev, int bufnum) +{ + struct arcnet_local *lp = netdev_priv(dev); + int i; + + lp->buf_queue[lp->first_free_buf++] = bufnum; + lp->first_free_buf %= 5; + + if (BUGLVL(D_DURING)) { + arc_printk(D_DURING, dev, "release_arcbuf: freed #%d; buffer queue is now: ", + bufnum); + for (i = lp->next_buf; i != lp->first_free_buf; i = (i + 1) % 5) + arc_cont(D_DURING, "#%d ", lp->buf_queue[i]); + arc_cont(D_DURING, "\n"); + } +} + +/* Get a buffer from the queue. + * If this returns -1, there are no buffers available. + */ +static int get_arcbuf(struct net_device *dev) +{ + struct arcnet_local *lp = netdev_priv(dev); + int buf = -1, i; + + if (!atomic_dec_and_test(&lp->buf_lock)) { + /* already in this function */ + arc_printk(D_NORMAL, dev, "get_arcbuf: overlap (%d)!\n", + lp->buf_lock.counter); + } else { /* we can continue */ + if (lp->next_buf >= 5) + lp->next_buf -= 5; + + if (lp->next_buf == lp->first_free_buf) { + arc_printk(D_NORMAL, dev, "get_arcbuf: BUG: no buffers are available??\n"); + } else { + buf = lp->buf_queue[lp->next_buf++]; + lp->next_buf %= 5; + } + } + + if (BUGLVL(D_DURING)) { + arc_printk(D_DURING, dev, "get_arcbuf: got #%d; buffer queue is now: ", + buf); + for (i = lp->next_buf; i != lp->first_free_buf; i = (i + 1) % 5) + arc_cont(D_DURING, "#%d ", lp->buf_queue[i]); + arc_cont(D_DURING, "\n"); + } + + atomic_inc(&lp->buf_lock); + return buf; +} + +static int choose_mtu(void) +{ + int count, mtu = 65535; + + /* choose the smallest MTU of all available encaps */ + for (count = 0; count < 256; count++) { + if (arc_proto_map[count] != &arc_proto_null && + arc_proto_map[count]->mtu < mtu) { + mtu = arc_proto_map[count]->mtu; + } + } + + return mtu == 65535 ? XMTU : mtu; +} + +static const struct header_ops arcnet_header_ops = { + .create = arcnet_header, +}; + +static const struct net_device_ops arcnet_netdev_ops = { + .ndo_open = arcnet_open, + .ndo_stop = arcnet_close, + .ndo_start_xmit = arcnet_send_packet, + .ndo_tx_timeout = arcnet_timeout, +}; + +/* Setup a struct device for ARCnet. */ +static void arcdev_setup(struct net_device *dev) +{ + dev->type = ARPHRD_ARCNET; + dev->netdev_ops = &arcnet_netdev_ops; + dev->header_ops = &arcnet_header_ops; + dev->hard_header_len = sizeof(struct arc_hardware); + dev->mtu = choose_mtu(); + + dev->addr_len = ARCNET_ALEN; + dev->tx_queue_len = 100; + dev->broadcast[0] = 0x00; /* for us, broadcasts are address 0 */ + dev->watchdog_timeo = TX_TIMEOUT; + + /* New-style flags. */ + dev->flags = IFF_BROADCAST; +} + +static void arcnet_timer(struct timer_list *t) +{ + struct arcnet_local *lp = from_timer(lp, t, timer); + struct net_device *dev = lp->dev; + + spin_lock_irq(&lp->lock); + + if (!lp->reset_in_progress && !netif_carrier_ok(dev)) { + netif_carrier_on(dev); + netdev_info(dev, "link up\n"); + } + + spin_unlock_irq(&lp->lock); +} + +static void reset_device_work(struct work_struct *work) +{ + struct arcnet_local *lp; + struct net_device *dev; + + lp = container_of(work, struct arcnet_local, reset_work); + dev = lp->dev; + + /* Do not bring the network interface back up if an ifdown + * was already done. + */ + if (!netif_running(dev) || !lp->reset_in_progress) + return; + + rtnl_lock(); + + /* Do another check, in case of an ifdown that was triggered in + * the small race window between the exit condition above and + * acquiring RTNL. + */ + if (!netif_running(dev) || !lp->reset_in_progress) + goto out; + + dev_close(dev); + dev_open(dev, NULL); + +out: + rtnl_unlock(); +} + +static void arcnet_reply_tasklet(struct tasklet_struct *t) +{ + struct arcnet_local *lp = from_tasklet(lp, t, reply_tasklet); + + struct sk_buff *ackskb, *skb; + struct sock_exterr_skb *serr; + struct sock *sk; + int ret; + + local_irq_disable(); + skb = lp->outgoing.skb; + if (!skb || !skb->sk) { + local_irq_enable(); + return; + } + + sock_hold(skb->sk); + sk = skb->sk; + ackskb = skb_clone_sk(skb); + sock_put(skb->sk); + + if (!ackskb) { + local_irq_enable(); + return; + } + + serr = SKB_EXT_ERR(ackskb); + memset(serr, 0, sizeof(*serr)); + serr->ee.ee_errno = ENOMSG; + serr->ee.ee_origin = SO_EE_ORIGIN_TXSTATUS; + serr->ee.ee_data = skb_shinfo(skb)->tskey; + serr->ee.ee_info = lp->reply_status; + + /* finally erasing outgoing skb */ + dev_kfree_skb(lp->outgoing.skb); + lp->outgoing.skb = NULL; + + ackskb->dev = lp->dev; + + ret = sock_queue_err_skb(sk, ackskb); + if (ret) + dev_kfree_skb_irq(ackskb); + + local_irq_enable(); +}; + +struct net_device *alloc_arcdev(const char *name) +{ + struct net_device *dev; + + dev = alloc_netdev(sizeof(struct arcnet_local), + name && *name ? name : "arc%d", NET_NAME_UNKNOWN, + arcdev_setup); + if (dev) { + struct arcnet_local *lp = netdev_priv(dev); + + lp->dev = dev; + spin_lock_init(&lp->lock); + timer_setup(&lp->timer, arcnet_timer, 0); + INIT_WORK(&lp->reset_work, reset_device_work); + } + + return dev; +} +EXPORT_SYMBOL(alloc_arcdev); + +void free_arcdev(struct net_device *dev) +{ + struct arcnet_local *lp = netdev_priv(dev); + + /* Do not cancel this at ->ndo_close(), as the workqueue itself + * indirectly calls the ifdown path through dev_close(). + */ + cancel_work_sync(&lp->reset_work); + free_netdev(dev); +} +EXPORT_SYMBOL(free_arcdev); + +/* Open/initialize the board. This is called sometime after booting when + * the 'ifconfig' program is run. + * + * This routine should set everything up anew at each open, even registers + * that "should" only need to be set once at boot, so that there is + * non-reboot way to recover if something goes wrong. + */ +int arcnet_open(struct net_device *dev) +{ + struct arcnet_local *lp = netdev_priv(dev); + int count, newmtu, error; + + arc_printk(D_INIT, dev, "opened."); + + if (!try_module_get(lp->hw.owner)) + return -ENODEV; + + if (BUGLVL(D_PROTO)) { + arc_printk(D_PROTO, dev, "protocol map (default is '%c'): ", + arc_proto_default->suffix); + for (count = 0; count < 256; count++) + arc_cont(D_PROTO, "%c", arc_proto_map[count]->suffix); + arc_cont(D_PROTO, "\n"); + } + + tasklet_setup(&lp->reply_tasklet, arcnet_reply_tasklet); + + arc_printk(D_INIT, dev, "arcnet_open: resetting card.\n"); + + /* try to put the card in a defined state - if it fails the first + * time, actually reset it. + */ + error = -ENODEV; + if (lp->hw.reset(dev, 0) && lp->hw.reset(dev, 1)) + goto out_module_put; + + newmtu = choose_mtu(); + if (newmtu < dev->mtu) + dev->mtu = newmtu; + + arc_printk(D_INIT, dev, "arcnet_open: mtu: %d.\n", dev->mtu); + + /* autodetect the encapsulation for each host. */ + memset(lp->default_proto, 0, sizeof(lp->default_proto)); + + /* the broadcast address is special - use the 'bcast' protocol */ + for (count = 0; count < 256; count++) { + if (arc_proto_map[count] == arc_bcast_proto) { + lp->default_proto[0] = count; + break; + } + } + + /* initialize buffers */ + atomic_set(&lp->buf_lock, 1); + + lp->next_buf = lp->first_free_buf = 0; + release_arcbuf(dev, 0); + release_arcbuf(dev, 1); + release_arcbuf(dev, 2); + release_arcbuf(dev, 3); + lp->cur_tx = lp->next_tx = -1; + lp->cur_rx = -1; + + lp->rfc1201.sequence = 1; + + /* bring up the hardware driver */ + if (lp->hw.open) + lp->hw.open(dev); + + if (dev->dev_addr[0] == 0) + arc_printk(D_NORMAL, dev, "WARNING! Station address 00 is reserved for broadcasts!\n"); + else if (dev->dev_addr[0] == 255) + arc_printk(D_NORMAL, dev, "WARNING! Station address FF may confuse DOS networking programs!\n"); + + arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__); + if (lp->hw.status(dev) & RESETflag) { + arc_printk(D_DEBUG, dev, "%s: %d: %s\n", + __FILE__, __LINE__, __func__); + lp->hw.command(dev, CFLAGScmd | RESETclear); + } + + arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__); + /* make sure we're ready to receive IRQ's. */ + lp->hw.intmask(dev, 0); + udelay(1); /* give it time to set the mask before + * we reset it again. (may not even be + * necessary) + */ + arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__); + lp->intmask = NORXflag | RECONflag; + lp->hw.intmask(dev, lp->intmask); + arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__); + + netif_carrier_off(dev); + netif_start_queue(dev); + mod_timer(&lp->timer, jiffies + msecs_to_jiffies(1000)); + + arcnet_led_event(dev, ARCNET_LED_EVENT_OPEN); + return 0; + + out_module_put: + module_put(lp->hw.owner); + return error; +} +EXPORT_SYMBOL(arcnet_open); + +/* The inverse routine to arcnet_open - shuts down the card. */ +int arcnet_close(struct net_device *dev) +{ + struct arcnet_local *lp = netdev_priv(dev); + + arcnet_led_event(dev, ARCNET_LED_EVENT_STOP); + del_timer_sync(&lp->timer); + + netif_stop_queue(dev); + netif_carrier_off(dev); + + tasklet_kill(&lp->reply_tasklet); + + /* flush TX and disable RX */ + lp->hw.intmask(dev, 0); + lp->hw.command(dev, NOTXcmd); /* stop transmit */ + lp->hw.command(dev, NORXcmd); /* disable receive */ + mdelay(1); + + /* shut down the card */ + lp->hw.close(dev); + + /* reset counters */ + lp->reset_in_progress = 0; + + module_put(lp->hw.owner); + return 0; +} +EXPORT_SYMBOL(arcnet_close); + +static int arcnet_header(struct sk_buff *skb, struct net_device *dev, + unsigned short type, const void *daddr, + const void *saddr, unsigned len) +{ + const struct arcnet_local *lp = netdev_priv(dev); + uint8_t _daddr, proto_num; + struct ArcProto *proto; + + arc_printk(D_DURING, dev, + "create header from %d to %d; protocol %d (%Xh); size %u.\n", + saddr ? *(uint8_t *)saddr : -1, + daddr ? *(uint8_t *)daddr : -1, + type, type, len); + + if (skb->len != 0 && len != skb->len) + arc_printk(D_NORMAL, dev, "arcnet_header: Yikes! skb->len(%d) != len(%d)!\n", + skb->len, len); + + /* Type is host order - ? */ + if (type == ETH_P_ARCNET) { + proto = arc_raw_proto; + arc_printk(D_DEBUG, dev, "arc_raw_proto used. proto='%c'\n", + proto->suffix); + _daddr = daddr ? *(uint8_t *)daddr : 0; + } else if (!daddr) { + /* if the dest addr isn't provided, we can't choose an + * encapsulation! Store the packet type (eg. ETH_P_IP) + * for now, and we'll push on a real header when we do + * rebuild_header. + */ + *(uint16_t *)skb_push(skb, 2) = type; + /* XXX: Why not use skb->mac_len? */ + if (skb->network_header - skb->mac_header != 2) + arc_printk(D_NORMAL, dev, "arcnet_header: Yikes! diff (%u) is not 2!\n", + skb->network_header - skb->mac_header); + return -2; /* return error -- can't transmit yet! */ + } else { + /* otherwise, we can just add the header as usual. */ + _daddr = *(uint8_t *)daddr; + proto_num = lp->default_proto[_daddr]; + proto = arc_proto_map[proto_num]; + arc_printk(D_DURING, dev, "building header for %02Xh using protocol '%c'\n", + proto_num, proto->suffix); + if (proto == &arc_proto_null && arc_bcast_proto != proto) { + arc_printk(D_DURING, dev, "actually, let's use '%c' instead.\n", + arc_bcast_proto->suffix); + proto = arc_bcast_proto; + } + } + return proto->build_header(skb, dev, type, _daddr); +} + +/* Called by the kernel in order to transmit a packet. */ +netdev_tx_t arcnet_send_packet(struct sk_buff *skb, + struct net_device *dev) +{ + struct arcnet_local *lp = netdev_priv(dev); + struct archdr *pkt; + struct arc_rfc1201 *soft; + struct ArcProto *proto; + int txbuf; + unsigned long flags; + int retval; + + arc_printk(D_DURING, dev, + "transmit requested (status=%Xh, txbufs=%d/%d, len=%d, protocol %x)\n", + lp->hw.status(dev), lp->cur_tx, lp->next_tx, skb->len, skb->protocol); + + pkt = (struct archdr *)skb->data; + soft = &pkt->soft.rfc1201; + proto = arc_proto_map[soft->proto]; + + arc_printk(D_SKB_SIZE, dev, "skb: transmitting %d bytes to %02X\n", + skb->len, pkt->hard.dest); + if (BUGLVL(D_SKB)) + arcnet_dump_skb(dev, skb, "tx"); + + /* fits in one packet? */ + if (skb->len - ARC_HDR_SIZE > XMTU && !proto->continue_tx) { + arc_printk(D_NORMAL, dev, "fixme: packet too large: compensating badly!\n"); + dev_kfree_skb(skb); + return NETDEV_TX_OK; /* don't try again */ + } + + /* We're busy transmitting a packet... */ + netif_stop_queue(dev); + + spin_lock_irqsave(&lp->lock, flags); + lp->hw.intmask(dev, 0); + if (lp->next_tx == -1) + txbuf = get_arcbuf(dev); + else + txbuf = -1; + + if (txbuf != -1) { + lp->outgoing.skb = skb; + if (proto->prepare_tx(dev, pkt, skb->len, txbuf) && + !proto->ack_tx) { + /* done right away and we don't want to acknowledge + * the package later - forget about it now + */ + dev->stats.tx_bytes += skb->len; + } else { + /* do it the 'split' way */ + lp->outgoing.proto = proto; + lp->outgoing.skb = skb; + lp->outgoing.pkt = pkt; + + if (proto->continue_tx && + proto->continue_tx(dev, txbuf)) { + arc_printk(D_NORMAL, dev, + "bug! continue_tx finished the first time! (proto='%c')\n", + proto->suffix); + } + } + retval = NETDEV_TX_OK; + lp->next_tx = txbuf; + } else { + retval = NETDEV_TX_BUSY; + } + + arc_printk(D_DEBUG, dev, "%s: %d: %s, status: %x\n", + __FILE__, __LINE__, __func__, lp->hw.status(dev)); + /* make sure we didn't ignore a TX IRQ while we were in here */ + lp->hw.intmask(dev, 0); + + arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__); + lp->intmask |= TXFREEflag | EXCNAKflag; + lp->hw.intmask(dev, lp->intmask); + arc_printk(D_DEBUG, dev, "%s: %d: %s, status: %x\n", + __FILE__, __LINE__, __func__, lp->hw.status(dev)); + + arcnet_led_event(dev, ARCNET_LED_EVENT_TX); + + spin_unlock_irqrestore(&lp->lock, flags); + return retval; /* no need to try again */ +} +EXPORT_SYMBOL(arcnet_send_packet); + +/* Actually start transmitting a packet that was loaded into a buffer + * by prepare_tx. This should _only_ be called by the interrupt handler. + */ +static int go_tx(struct net_device *dev) +{ + struct arcnet_local *lp = netdev_priv(dev); + + arc_printk(D_DURING, dev, "go_tx: status=%Xh, intmask=%Xh, next_tx=%d, cur_tx=%d\n", + lp->hw.status(dev), lp->intmask, lp->next_tx, lp->cur_tx); + + if (lp->cur_tx != -1 || lp->next_tx == -1) + return 0; + + if (BUGLVL(D_TX)) + arcnet_dump_packet(dev, lp->next_tx, "go_tx", 0); + + lp->cur_tx = lp->next_tx; + lp->next_tx = -1; + + /* start sending */ + lp->hw.command(dev, TXcmd | (lp->cur_tx << 3)); + + dev->stats.tx_packets++; + lp->lasttrans_dest = lp->lastload_dest; + lp->lastload_dest = 0; + lp->excnak_pending = 0; + lp->intmask |= TXFREEflag | EXCNAKflag; + + return 1; +} + +/* Called by the kernel when transmit times out */ +void arcnet_timeout(struct net_device *dev, unsigned int txqueue) +{ + unsigned long flags; + struct arcnet_local *lp = netdev_priv(dev); + int status = lp->hw.status(dev); + char *msg; + + spin_lock_irqsave(&lp->lock, flags); + if (status & TXFREEflag) { /* transmit _DID_ finish */ + msg = " - missed IRQ?"; + } else { + msg = ""; + dev->stats.tx_aborted_errors++; + lp->timed_out = 1; + lp->hw.command(dev, NOTXcmd | (lp->cur_tx << 3)); + } + dev->stats.tx_errors++; + + /* make sure we didn't miss a TX or a EXC NAK IRQ */ + lp->hw.intmask(dev, 0); + lp->intmask |= TXFREEflag | EXCNAKflag; + lp->hw.intmask(dev, lp->intmask); + + spin_unlock_irqrestore(&lp->lock, flags); + + if (time_after(jiffies, lp->last_timeout + 10 * HZ)) { + arc_printk(D_EXTRA, dev, "tx timed out%s (status=%Xh, intmask=%Xh, dest=%02Xh)\n", + msg, status, lp->intmask, lp->lasttrans_dest); + lp->last_timeout = jiffies; + } + + if (lp->cur_tx == -1) + netif_wake_queue(dev); +} +EXPORT_SYMBOL(arcnet_timeout); + +/* The typical workload of the driver: Handle the network interface + * interrupts. Establish which device needs attention, and call the correct + * chipset interrupt handler. + */ +irqreturn_t arcnet_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = dev_id; + struct arcnet_local *lp; + int recbuf, status, diagstatus, didsomething, boguscount; + unsigned long flags; + int retval = IRQ_NONE; + + arc_printk(D_DURING, dev, "\n"); + + arc_printk(D_DURING, dev, "in arcnet_interrupt\n"); + + lp = netdev_priv(dev); + BUG_ON(!lp); + + spin_lock_irqsave(&lp->lock, flags); + + if (lp->reset_in_progress) + goto out; + + /* RESET flag was enabled - if device is not running, we must + * clear it right away (but nothing else). + */ + if (!netif_running(dev)) { + if (lp->hw.status(dev) & RESETflag) + lp->hw.command(dev, CFLAGScmd | RESETclear); + lp->hw.intmask(dev, 0); + spin_unlock_irqrestore(&lp->lock, flags); + return retval; + } + + arc_printk(D_DURING, dev, "in arcnet_inthandler (status=%Xh, intmask=%Xh)\n", + lp->hw.status(dev), lp->intmask); + + boguscount = 5; + do { + status = lp->hw.status(dev); + diagstatus = (status >> 8) & 0xFF; + + arc_printk(D_DEBUG, dev, "%s: %d: %s: status=%x\n", + __FILE__, __LINE__, __func__, status); + didsomething = 0; + + /* RESET flag was enabled - card is resetting and if RX is + * disabled, it's NOT because we just got a packet. + * + * The card is in an undefined state. + * Clear it out and start over. + */ + if (status & RESETflag) { + arc_printk(D_NORMAL, dev, "spurious reset (status=%Xh)\n", + status); + + lp->reset_in_progress = 1; + netif_stop_queue(dev); + netif_carrier_off(dev); + schedule_work(&lp->reset_work); + + /* get out of the interrupt handler! */ + goto out; + } + /* RX is inhibited - we must have received something. + * Prepare to receive into the next buffer. + * + * We don't actually copy the received packet from the card + * until after the transmit handler runs (and possibly + * launches the next tx); this should improve latency slightly + * if we get both types of interrupts at once. + */ + recbuf = -1; + if (status & lp->intmask & NORXflag) { + recbuf = lp->cur_rx; + arc_printk(D_DURING, dev, "Buffer #%d: receive irq (status=%Xh)\n", + recbuf, status); + + lp->cur_rx = get_arcbuf(dev); + if (lp->cur_rx != -1) { + arc_printk(D_DURING, dev, "enabling receive to buffer #%d\n", + lp->cur_rx); + lp->hw.command(dev, RXcmd | (lp->cur_rx << 3) | RXbcasts); + } + didsomething++; + } + + if ((diagstatus & EXCNAKflag)) { + arc_printk(D_DURING, dev, "EXCNAK IRQ (diagstat=%Xh)\n", + diagstatus); + + lp->hw.command(dev, NOTXcmd); /* disable transmit */ + lp->excnak_pending = 1; + + lp->hw.command(dev, EXCNAKclear); + lp->intmask &= ~(EXCNAKflag); + didsomething++; + } + + /* a transmit finished, and we're interested in it. */ + if ((status & lp->intmask & TXFREEflag) || lp->timed_out) { + int ackstatus; + lp->intmask &= ~(TXFREEflag | EXCNAKflag); + + if (status & TXACKflag) + ackstatus = 2; + else if (lp->excnak_pending) + ackstatus = 1; + else + ackstatus = 0; + + arc_printk(D_DURING, dev, "TX IRQ (stat=%Xh)\n", + status); + + if (lp->cur_tx != -1 && !lp->timed_out) { + if (!(status & TXACKflag)) { + if (lp->lasttrans_dest != 0) { + arc_printk(D_EXTRA, dev, + "transmit was not acknowledged! (status=%Xh, dest=%02Xh)\n", + status, + lp->lasttrans_dest); + dev->stats.tx_errors++; + dev->stats.tx_carrier_errors++; + } else { + arc_printk(D_DURING, dev, + "broadcast was not acknowledged; that's normal (status=%Xh, dest=%02Xh)\n", + status, + lp->lasttrans_dest); + } + } + + if (lp->outgoing.proto && + lp->outgoing.proto->ack_tx) { + lp->outgoing.proto + ->ack_tx(dev, ackstatus); + } + lp->reply_status = ackstatus; + tasklet_hi_schedule(&lp->reply_tasklet); + } + if (lp->cur_tx != -1) + release_arcbuf(dev, lp->cur_tx); + + lp->cur_tx = -1; + lp->timed_out = 0; + didsomething++; + + /* send another packet if there is one */ + go_tx(dev); + + /* continue a split packet, if any */ + if (lp->outgoing.proto && + lp->outgoing.proto->continue_tx) { + int txbuf = get_arcbuf(dev); + + if (txbuf != -1) { + if (lp->outgoing.proto->continue_tx(dev, txbuf)) { + /* that was the last segment */ + dev->stats.tx_bytes += lp->outgoing.skb->len; + if (!lp->outgoing.proto->ack_tx) { + dev_kfree_skb_irq(lp->outgoing.skb); + lp->outgoing.proto = NULL; + } + } + lp->next_tx = txbuf; + } + } + /* inform upper layers of idleness, if necessary */ + if (lp->cur_tx == -1) + netif_wake_queue(dev); + } + /* now process the received packet, if any */ + if (recbuf != -1) { + if (BUGLVL(D_RX)) + arcnet_dump_packet(dev, recbuf, "rx irq", 0); + + arcnet_rx(dev, recbuf); + release_arcbuf(dev, recbuf); + + didsomething++; + } + if (status & lp->intmask & RECONflag) { + lp->hw.command(dev, CFLAGScmd | CONFIGclear); + dev->stats.tx_carrier_errors++; + + arc_printk(D_RECON, dev, "Network reconfiguration detected (status=%Xh)\n", + status); + if (netif_carrier_ok(dev)) { + netif_carrier_off(dev); + netdev_info(dev, "link down\n"); + } + mod_timer(&lp->timer, jiffies + msecs_to_jiffies(1000)); + + arcnet_led_event(dev, ARCNET_LED_EVENT_RECON); + /* MYRECON bit is at bit 7 of diagstatus */ + if (diagstatus & 0x80) + arc_printk(D_RECON, dev, "Put out that recon myself\n"); + + /* is the RECON info empty or old? */ + if (!lp->first_recon || !lp->last_recon || + time_after(jiffies, lp->last_recon + HZ * 10)) { + if (lp->network_down) + arc_printk(D_NORMAL, dev, "reconfiguration detected: cabling restored?\n"); + lp->first_recon = lp->last_recon = jiffies; + lp->num_recons = lp->network_down = 0; + + arc_printk(D_DURING, dev, "recon: clearing counters.\n"); + } else { /* add to current RECON counter */ + lp->last_recon = jiffies; + lp->num_recons++; + + arc_printk(D_DURING, dev, "recon: counter=%d, time=%lds, net=%d\n", + lp->num_recons, + (lp->last_recon - lp->first_recon) / HZ, + lp->network_down); + + /* if network is marked up; + * and first_recon and last_recon are 60+ apart; + * and the average no. of recons counted is + * > RECON_THRESHOLD/min; + * then print a warning message. + */ + if (!lp->network_down && + (lp->last_recon - lp->first_recon) <= HZ * 60 && + lp->num_recons >= RECON_THRESHOLD) { + lp->network_down = 1; + arc_printk(D_NORMAL, dev, "many reconfigurations detected: cabling problem?\n"); + } else if (!lp->network_down && + lp->last_recon - lp->first_recon > HZ * 60) { + /* reset counters if we've gone for + * over a minute. + */ + lp->first_recon = lp->last_recon; + lp->num_recons = 1; + } + } + } else if (lp->network_down && + time_after(jiffies, lp->last_recon + HZ * 10)) { + if (lp->network_down) + arc_printk(D_NORMAL, dev, "cabling restored?\n"); + lp->first_recon = lp->last_recon = 0; + lp->num_recons = lp->network_down = 0; + + arc_printk(D_DURING, dev, "not recon: clearing counters anyway.\n"); + netif_carrier_on(dev); + } + + if (didsomething) + retval |= IRQ_HANDLED; + } while (--boguscount && didsomething); + + arc_printk(D_DURING, dev, "arcnet_interrupt complete (status=%Xh, count=%d)\n", + lp->hw.status(dev), boguscount); + arc_printk(D_DURING, dev, "\n"); + + lp->hw.intmask(dev, 0); + udelay(1); + lp->hw.intmask(dev, lp->intmask); + +out: + spin_unlock_irqrestore(&lp->lock, flags); + return retval; +} +EXPORT_SYMBOL(arcnet_interrupt); + +/* This is a generic packet receiver that calls arcnet??_rx depending on the + * protocol ID found. + */ +static void arcnet_rx(struct net_device *dev, int bufnum) +{ + struct arcnet_local *lp = netdev_priv(dev); + union { + struct archdr pkt; + char buf[512]; + } rxdata; + struct arc_rfc1201 *soft; + int length, ofs; + + soft = &rxdata.pkt.soft.rfc1201; + + lp->hw.copy_from_card(dev, bufnum, 0, &rxdata.pkt, ARC_HDR_SIZE); + if (rxdata.pkt.hard.offset[0]) { + ofs = rxdata.pkt.hard.offset[0]; + length = 256 - ofs; + } else { + ofs = rxdata.pkt.hard.offset[1]; + length = 512 - ofs; + } + + /* get the full header, if possible */ + if (sizeof(rxdata.pkt.soft) <= length) { + lp->hw.copy_from_card(dev, bufnum, ofs, soft, sizeof(rxdata.pkt.soft)); + } else { + memset(&rxdata.pkt.soft, 0, sizeof(rxdata.pkt.soft)); + lp->hw.copy_from_card(dev, bufnum, ofs, soft, length); + } + + arc_printk(D_DURING, dev, "Buffer #%d: received packet from %02Xh to %02Xh (%d+4 bytes)\n", + bufnum, rxdata.pkt.hard.source, rxdata.pkt.hard.dest, length); + + dev->stats.rx_packets++; + dev->stats.rx_bytes += length + ARC_HDR_SIZE; + + /* call the right receiver for the protocol */ + if (arc_proto_map[soft->proto]->is_ip) { + if (BUGLVL(D_PROTO)) { + struct ArcProto + *oldp = arc_proto_map[lp->default_proto[rxdata.pkt.hard.source]], + *newp = arc_proto_map[soft->proto]; + + if (oldp != newp) { + arc_printk(D_PROTO, dev, + "got protocol %02Xh; encap for host %02Xh is now '%c' (was '%c')\n", + soft->proto, rxdata.pkt.hard.source, + newp->suffix, oldp->suffix); + } + } + + /* broadcasts will always be done with the last-used encap. */ + lp->default_proto[0] = soft->proto; + + /* in striking contrast, the following isn't a hack. */ + lp->default_proto[rxdata.pkt.hard.source] = soft->proto; + } + /* call the protocol-specific receiver. */ + arc_proto_map[soft->proto]->rx(dev, bufnum, &rxdata.pkt, length); +} + +static void null_rx(struct net_device *dev, int bufnum, + struct archdr *pkthdr, int length) +{ + arc_printk(D_PROTO, dev, + "rx: don't know how to deal with proto %02Xh from host %02Xh.\n", + pkthdr->soft.rfc1201.proto, pkthdr->hard.source); +} + +static int null_build_header(struct sk_buff *skb, struct net_device *dev, + unsigned short type, uint8_t daddr) +{ + struct arcnet_local *lp = netdev_priv(dev); + + arc_printk(D_PROTO, dev, + "tx: can't build header for encap %02Xh; load a protocol driver.\n", + lp->default_proto[daddr]); + + /* always fails */ + return 0; +} + +/* the "do nothing" prepare_tx function warns that there's nothing to do. */ +static int null_prepare_tx(struct net_device *dev, struct archdr *pkt, + int length, int bufnum) +{ + struct arcnet_local *lp = netdev_priv(dev); + struct arc_hardware newpkt; + + arc_printk(D_PROTO, dev, "tx: no encap for this host; load a protocol driver.\n"); + + /* send a packet to myself -- will never get received, of course */ + newpkt.source = newpkt.dest = dev->dev_addr[0]; + + /* only one byte of actual data (and it's random) */ + newpkt.offset[0] = 0xFF; + + lp->hw.copy_to_card(dev, bufnum, 0, &newpkt, ARC_HDR_SIZE); + + return 1; /* done */ +} diff --git a/drivers/net/arcnet/capmode.c b/drivers/net/arcnet/capmode.c new file mode 100644 index 000000000..c09b56784 --- /dev/null +++ b/drivers/net/arcnet/capmode.c @@ -0,0 +1,268 @@ +/* + * Linux ARCnet driver - "cap mode" packet encapsulation. + * It adds sequence numbers to packets for communicating between a user space + * application and the driver. After a transmit it sends a packet with protocol + * byte 0 back up to the userspace containing the sequence number of the packet + * plus the transmit-status on the ArcNet. + * + * Written 2002-4 by Esben Nielsen, Vestas Wind Systems A/S + * Derived from arc-rawmode.c by Avery Pennarun. + * arc-rawmode was in turned based on skeleton.c, see below. + * + * ********************** + * + * The original copyright of skeleton.c was as follows: + * + * skeleton.c Written 1993 by Donald Becker. + * Copyright 1993 United States Government as represented by the + * Director, National Security Agency. This software may only be used + * and distributed according to the terms of the GNU General Public License as + * modified by SRC, incorporated herein by reference. + * + * ********************** + * + * For more details, see drivers/net/arcnet.c + * + * ********************** + */ + +#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include + +#include "arcdevice.h" + +/* packet receiver */ +static void rx(struct net_device *dev, int bufnum, + struct archdr *pkthdr, int length) +{ + struct arcnet_local *lp = netdev_priv(dev); + struct sk_buff *skb; + struct archdr *pkt; + char *pktbuf, *pkthdrbuf; + int ofs; + + arc_printk(D_DURING, dev, "it's a raw(cap) packet (length=%d)\n", + length); + + if (length >= MinTU) + ofs = 512 - length; + else + ofs = 256 - length; + + skb = alloc_skb(length + ARC_HDR_SIZE + sizeof(int), GFP_ATOMIC); + if (!skb) { + dev->stats.rx_dropped++; + return; + } + skb_put(skb, length + ARC_HDR_SIZE + sizeof(int)); + skb->dev = dev; + skb_reset_mac_header(skb); + pkt = (struct archdr *)skb_mac_header(skb); + skb_pull(skb, ARC_HDR_SIZE); + + /* up to sizeof(pkt->soft) has already been copied from the card + * squeeze in an int for the cap encapsulation + * use these variables to be sure we count in bytes, not in + * sizeof(struct archdr) + */ + pktbuf = (char *)pkt; + pkthdrbuf = (char *)pkthdr; + memcpy(pktbuf, pkthdrbuf, ARC_HDR_SIZE + sizeof(pkt->soft.cap.proto)); + memcpy(pktbuf + ARC_HDR_SIZE + sizeof(pkt->soft.cap.proto) + sizeof(int), + pkthdrbuf + ARC_HDR_SIZE + sizeof(pkt->soft.cap.proto), + sizeof(struct archdr) - ARC_HDR_SIZE - sizeof(pkt->soft.cap.proto)); + + if (length > sizeof(pkt->soft)) + lp->hw.copy_from_card(dev, bufnum, ofs + sizeof(pkt->soft), + pkt->soft.raw + sizeof(pkt->soft) + + sizeof(int), + length - sizeof(pkt->soft)); + + if (BUGLVL(D_SKB)) + arcnet_dump_skb(dev, skb, "rx"); + + skb->protocol = cpu_to_be16(ETH_P_ARCNET); + netif_rx(skb); +} + +/* Create the ARCnet hard/soft headers for cap mode. + * There aren't any soft headers in cap mode - not even the protocol id. + */ +static int build_header(struct sk_buff *skb, + struct net_device *dev, + unsigned short type, + uint8_t daddr) +{ + int hdr_size = ARC_HDR_SIZE; + struct archdr *pkt = skb_push(skb, hdr_size); + + arc_printk(D_PROTO, dev, "Preparing header for cap packet %x.\n", + *((int *)&pkt->soft.cap.cookie[0])); + + /* Set the source hardware address. + * + * This is pretty pointless for most purposes, but it can help in + * debugging. ARCnet does not allow us to change the source address in + * the actual packet sent) + */ + pkt->hard.source = *dev->dev_addr; + + /* see linux/net/ethernet/eth.c to see where I got the following */ + + if (dev->flags & (IFF_LOOPBACK | IFF_NOARP)) { + /* FIXME: fill in the last byte of the dest ipaddr here to + * better comply with RFC1051 in "noarp" mode. + */ + pkt->hard.dest = 0; + return hdr_size; + } + /* otherwise, just fill it in and go! */ + pkt->hard.dest = daddr; + + return hdr_size; /* success */ +} + +static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length, + int bufnum) +{ + struct arcnet_local *lp = netdev_priv(dev); + struct arc_hardware *hard = &pkt->hard; + int ofs; + + /* hard header is not included in packet length */ + length -= ARC_HDR_SIZE; + /* And neither is the cookie field */ + length -= sizeof(int); + + arc_printk(D_DURING, dev, "prepare_tx: txbufs=%d/%d/%d\n", + lp->next_tx, lp->cur_tx, bufnum); + + arc_printk(D_PROTO, dev, "Sending for cap packet %x.\n", + *((int *)&pkt->soft.cap.cookie[0])); + + if (length > XMTU) { + /* should never happen! other people already check for this. */ + arc_printk(D_NORMAL, dev, "Bug! prepare_tx with size %d (> %d)\n", + length, XMTU); + length = XMTU; + } + if (length > MinTU) { + hard->offset[0] = 0; + hard->offset[1] = ofs = 512 - length; + } else if (length > MTU) { + hard->offset[0] = 0; + hard->offset[1] = ofs = 512 - length - 3; + } else { + hard->offset[0] = ofs = 256 - length; + } + + arc_printk(D_DURING, dev, "prepare_tx: length=%d ofs=%d\n", + length, ofs); + + /* Copy the arcnet-header + the protocol byte down: */ + lp->hw.copy_to_card(dev, bufnum, 0, hard, ARC_HDR_SIZE); + lp->hw.copy_to_card(dev, bufnum, ofs, &pkt->soft.cap.proto, + sizeof(pkt->soft.cap.proto)); + + /* Skip the extra integer we have written into it as a cookie + * but write the rest of the message: + */ + lp->hw.copy_to_card(dev, bufnum, ofs + 1, + ((unsigned char *)&pkt->soft.cap.mes), length - 1); + + lp->lastload_dest = hard->dest; + + return 1; /* done */ +} + +static int ack_tx(struct net_device *dev, int acked) +{ + struct arcnet_local *lp = netdev_priv(dev); + struct sk_buff *ackskb; + struct archdr *ackpkt; + int length = sizeof(struct arc_cap); + + arc_printk(D_DURING, dev, "capmode: ack_tx: protocol: %x: result: %d\n", + lp->outgoing.skb->protocol, acked); + + if (BUGLVL(D_SKB)) + arcnet_dump_skb(dev, lp->outgoing.skb, "ack_tx"); + + /* Now alloc a skb to send back up through the layers: */ + ackskb = alloc_skb(length + ARC_HDR_SIZE, GFP_ATOMIC); + if (!ackskb) + goto free_outskb; + + skb_put(ackskb, length + ARC_HDR_SIZE); + ackskb->dev = dev; + + skb_reset_mac_header(ackskb); + ackpkt = (struct archdr *)skb_mac_header(ackskb); + /* skb_pull(ackskb, ARC_HDR_SIZE); */ + + skb_copy_from_linear_data(lp->outgoing.skb, ackpkt, + ARC_HDR_SIZE + sizeof(struct arc_cap)); + ackpkt->soft.cap.proto = 0; /* using protocol 0 for acknowledge */ + ackpkt->soft.cap.mes.ack = acked; + + arc_printk(D_PROTO, dev, "Acknowledge for cap packet %x.\n", + *((int *)&ackpkt->soft.cap.cookie[0])); + + ackskb->protocol = cpu_to_be16(ETH_P_ARCNET); + + if (BUGLVL(D_SKB)) + arcnet_dump_skb(dev, ackskb, "ack_tx_recv"); + netif_rx(ackskb); + +free_outskb: + dev_kfree_skb_irq(lp->outgoing.skb); + lp->outgoing.proto = NULL; + /* We are always finished when in this protocol */ + + return 0; +} + +static struct ArcProto capmode_proto = { + .suffix = 'r', + .mtu = XMTU, + .rx = rx, + .build_header = build_header, + .prepare_tx = prepare_tx, + .ack_tx = ack_tx +}; + +static int __init capmode_module_init(void) +{ + int count; + + pr_info("cap mode (`c') encapsulation support loaded\n"); + + for (count = 1; count <= 8; count++) + if (arc_proto_map[count] == arc_proto_default) + arc_proto_map[count] = &capmode_proto; + + /* for cap mode, we only set the bcast proto if there's no better one */ + if (arc_bcast_proto == arc_proto_default) + arc_bcast_proto = &capmode_proto; + + arc_proto_default = &capmode_proto; + arc_raw_proto = &capmode_proto; + + return 0; +} + +static void __exit capmode_module_exit(void) +{ + arcnet_unregister_proto(&capmode_proto); +} +module_init(capmode_module_init); +module_exit(capmode_module_exit); + +MODULE_LICENSE("GPL"); diff --git a/drivers/net/arcnet/com20020-isa.c b/drivers/net/arcnet/com20020-isa.c new file mode 100644 index 000000000..293a621e6 --- /dev/null +++ b/drivers/net/arcnet/com20020-isa.c @@ -0,0 +1,229 @@ +/* + * Linux ARCnet driver - COM20020 chipset support + * + * Written 1997 by David Woodhouse. + * Written 1994-1999 by Avery Pennarun. + * Written 1999-2000 by Martin Mares . + * Derived from skeleton.c by Donald Becker. + * + * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com) + * for sponsoring the further development of this driver. + * + * ********************** + * + * The original copyright of skeleton.c was as follows: + * + * skeleton.c Written 1993 by Donald Becker. + * Copyright 1993 United States Government as represented by the + * Director, National Security Agency. This software may only be used + * and distributed according to the terms of the GNU General Public License as + * modified by SRC, incorporated herein by reference. + * + * ********************** + * + * For more details, see drivers/net/arcnet.c + * + * ********************** + */ + +#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "arcdevice.h" +#include "com20020.h" + +/* We cannot (yet) probe for an IO mapped card, although we can check that + * it's where we were told it was, and even do autoirq. + */ +static int __init com20020isa_probe(struct net_device *dev) +{ + int ioaddr; + unsigned long airqmask; + struct arcnet_local *lp = netdev_priv(dev); + int err; + + if (BUGLVL(D_NORMAL)) + pr_info("%s\n", "COM20020 ISA support (by David Woodhouse et al.)"); + + ioaddr = dev->base_addr; + if (!ioaddr) { + arc_printk(D_NORMAL, dev, "No autoprobe (yet) for IO mapped cards; you must specify the base address!\n"); + return -ENODEV; + } + if (!request_region(ioaddr, ARCNET_TOTAL_SIZE, "arcnet (COM20020)")) { + arc_printk(D_NORMAL, dev, "IO region %xh-%xh already allocated.\n", + ioaddr, ioaddr + ARCNET_TOTAL_SIZE - 1); + return -ENXIO; + } + if (arcnet_inb(ioaddr, COM20020_REG_R_STATUS) == 0xFF) { + arc_printk(D_NORMAL, dev, "IO address %x empty\n", ioaddr); + err = -ENODEV; + goto out; + } + if (com20020_check(dev)) { + err = -ENODEV; + goto out; + } + + if (!dev->irq) { + /* if we do this, we're sure to get an IRQ since the + * card has just reset and the NORXflag is on until + * we tell it to start receiving. + */ + arc_printk(D_INIT_REASONS, dev, "intmask was %02Xh\n", + arcnet_inb(ioaddr, COM20020_REG_R_STATUS)); + arcnet_outb(0, ioaddr, COM20020_REG_W_INTMASK); + airqmask = probe_irq_on(); + arcnet_outb(NORXflag, ioaddr, COM20020_REG_W_INTMASK); + udelay(1); + arcnet_outb(0, ioaddr, COM20020_REG_W_INTMASK); + dev->irq = probe_irq_off(airqmask); + + if ((int)dev->irq <= 0) { + arc_printk(D_INIT_REASONS, dev, "Autoprobe IRQ failed first time\n"); + airqmask = probe_irq_on(); + arcnet_outb(NORXflag, ioaddr, COM20020_REG_W_INTMASK); + udelay(5); + arcnet_outb(0, ioaddr, COM20020_REG_W_INTMASK); + dev->irq = probe_irq_off(airqmask); + if ((int)dev->irq <= 0) { + arc_printk(D_NORMAL, dev, "Autoprobe IRQ failed.\n"); + err = -ENODEV; + goto out; + } + } + } + + lp->card_name = "ISA COM20020"; + + err = com20020_found(dev, 0); + if (err != 0) + goto out; + + return 0; + +out: + release_region(ioaddr, ARCNET_TOTAL_SIZE); + return err; +} + +static int node = 0; +static int io = 0x0; /* <--- EDIT THESE LINES FOR YOUR CONFIGURATION */ +static int irq = 0; /* or use the insmod io= irq= shmem= options */ +static char device[9]; /* use eg. device="arc1" to change name */ +static int timeout = 3; +static int backplane = 0; +static int clockp = 0; +static int clockm = 0; + +module_param(node, int, 0); +module_param_hw(io, int, ioport, 0); +module_param_hw(irq, int, irq, 0); +module_param_string(device, device, sizeof(device), 0); +module_param(timeout, int, 0); +module_param(backplane, int, 0); +module_param(clockp, int, 0); +module_param(clockm, int, 0); + +MODULE_LICENSE("GPL"); + +static struct net_device *my_dev; + +static int __init com20020_init(void) +{ + struct net_device *dev; + struct arcnet_local *lp; + + dev = alloc_arcdev(device); + if (!dev) + return -ENOMEM; + + if (node && node != 0xff) + arcnet_set_addr(dev, node); + + dev->netdev_ops = &com20020_netdev_ops; + + lp = netdev_priv(dev); + lp->backplane = backplane; + lp->clockp = clockp & 7; + lp->clockm = clockm & 3; + lp->timeout = timeout & 3; + lp->hw.owner = THIS_MODULE; + + dev->base_addr = io; + dev->irq = irq; + + if (dev->irq == 2) + dev->irq = 9; + + if (com20020isa_probe(dev)) { + free_arcdev(dev); + return -EIO; + } + + my_dev = dev; + return 0; +} + +static void __exit com20020_exit(void) +{ + unregister_netdev(my_dev); + free_irq(my_dev->irq, my_dev); + release_region(my_dev->base_addr, ARCNET_TOTAL_SIZE); + free_arcdev(my_dev); +} + +#ifndef MODULE +static int __init com20020isa_setup(char *s) +{ + int ints[8]; + + s = get_options(s, 8, ints); + if (!ints[0]) + return 1; + + switch (ints[0]) { + default: /* ERROR */ + pr_info("Too many arguments\n"); + fallthrough; + case 6: /* Timeout */ + timeout = ints[6]; + fallthrough; + case 5: /* CKP value */ + clockp = ints[5]; + fallthrough; + case 4: /* Backplane flag */ + backplane = ints[4]; + fallthrough; + case 3: /* Node ID */ + node = ints[3]; + fallthrough; + case 2: /* IRQ */ + irq = ints[2]; + fallthrough; + case 1: /* IO address */ + io = ints[1]; + } + if (*s) + snprintf(device, sizeof(device), "%s", s); + return 1; +} + +__setup("com20020=", com20020isa_setup); + +#endif /* MODULE */ + +module_init(com20020_init) +module_exit(com20020_exit) diff --git a/drivers/net/arcnet/com20020-pci.c b/drivers/net/arcnet/com20020-pci.c new file mode 100644 index 000000000..7b5c8bb02 --- /dev/null +++ b/drivers/net/arcnet/com20020-pci.c @@ -0,0 +1,618 @@ +/* + * Linux ARCnet driver - COM20020 PCI support + * Contemporary Controls PCI20 and SOHARD SH-ARC PCI + * + * Written 1994-1999 by Avery Pennarun, + * based on an ISA version by David Woodhouse. + * Written 1999-2000 by Martin Mares . + * Derived from skeleton.c by Donald Becker. + * + * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com) + * for sponsoring the further development of this driver. + * + * ********************** + * + * The original copyright of skeleton.c was as follows: + * + * skeleton.c Written 1993 by Donald Becker. + * Copyright 1993 United States Government as represented by the + * Director, National Security Agency. This software may only be used + * and distributed according to the terms of the GNU General Public License as + * modified by SRC, incorporated herein by reference. + * + * ********************** + * + * For more details, see drivers/net/arcnet.c + * + * ********************** + */ + +#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "arcdevice.h" +#include "com20020.h" + +/* Module parameters */ + +static int node; +static char device[9]; /* use eg. device="arc1" to change name */ +static int timeout = 3; +static int backplane; +static int clockp; +static int clockm; + +module_param(node, int, 0); +module_param_string(device, device, sizeof(device), 0); +module_param(timeout, int, 0); +module_param(backplane, int, 0); +module_param(clockp, int, 0); +module_param(clockm, int, 0); +MODULE_LICENSE("GPL"); + +static void led_tx_set(struct led_classdev *led_cdev, + enum led_brightness value) +{ + struct com20020_dev *card; + struct com20020_priv *priv; + struct com20020_pci_card_info *ci; + + card = container_of(led_cdev, struct com20020_dev, tx_led); + + priv = card->pci_priv; + ci = priv->ci; + + outb(!!value, priv->misc + ci->leds[card->index].green); +} + +static void led_recon_set(struct led_classdev *led_cdev, + enum led_brightness value) +{ + struct com20020_dev *card; + struct com20020_priv *priv; + struct com20020_pci_card_info *ci; + + card = container_of(led_cdev, struct com20020_dev, recon_led); + + priv = card->pci_priv; + ci = priv->ci; + + outb(!!value, priv->misc + ci->leds[card->index].red); +} + +static ssize_t backplane_mode_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct net_device *net_dev = to_net_dev(dev); + struct arcnet_local *lp = netdev_priv(net_dev); + + return sprintf(buf, "%s\n", lp->backplane ? "true" : "false"); +} +static DEVICE_ATTR_RO(backplane_mode); + +static struct attribute *com20020_state_attrs[] = { + &dev_attr_backplane_mode.attr, + NULL, +}; + +static const struct attribute_group com20020_state_group = { + .name = NULL, + .attrs = com20020_state_attrs, +}; + +static void com20020pci_remove(struct pci_dev *pdev); + +static int com20020pci_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + struct com20020_pci_card_info *ci; + struct com20020_pci_channel_map *mm; + struct net_device *dev; + struct arcnet_local *lp; + struct com20020_priv *priv; + int i, ioaddr, ret; + struct resource *r; + + ret = 0; + + if (pci_enable_device(pdev)) + return -EIO; + + priv = devm_kzalloc(&pdev->dev, sizeof(struct com20020_priv), + GFP_KERNEL); + if (!priv) + return -ENOMEM; + + ci = (struct com20020_pci_card_info *)id->driver_data; + if (!ci) + return -EINVAL; + + priv->ci = ci; + mm = &ci->misc_map; + + pci_set_drvdata(pdev, priv); + + INIT_LIST_HEAD(&priv->list_dev); + + if (mm->size) { + ioaddr = pci_resource_start(pdev, mm->bar) + mm->offset; + r = devm_request_region(&pdev->dev, ioaddr, mm->size, + "com20020-pci"); + if (!r) { + pr_err("IO region %xh-%xh already allocated.\n", + ioaddr, ioaddr + mm->size - 1); + return -EBUSY; + } + priv->misc = ioaddr; + } + + for (i = 0; i < ci->devcount; i++) { + struct com20020_pci_channel_map *cm = &ci->chan_map_tbl[i]; + struct com20020_dev *card; + int dev_id_mask = 0xf; + + dev = alloc_arcdev(device); + if (!dev) { + ret = -ENOMEM; + break; + } + dev->dev_port = i; + + dev->netdev_ops = &com20020_netdev_ops; + + lp = netdev_priv(dev); + + arc_printk(D_NORMAL, dev, "%s Controls\n", ci->name); + ioaddr = pci_resource_start(pdev, cm->bar) + cm->offset; + + r = devm_request_region(&pdev->dev, ioaddr, cm->size, + "com20020-pci"); + if (!r) { + pr_err("IO region %xh-%xh already allocated\n", + ioaddr, ioaddr + cm->size - 1); + ret = -EBUSY; + goto err_free_arcdev; + } + + /* Dummy access after Reset + * ARCNET controller needs + * this access to detect bustype + */ + arcnet_outb(0x00, ioaddr, COM20020_REG_W_COMMAND); + arcnet_inb(ioaddr, COM20020_REG_R_DIAGSTAT); + + SET_NETDEV_DEV(dev, &pdev->dev); + dev->base_addr = ioaddr; + arcnet_set_addr(dev, node); + dev->sysfs_groups[0] = &com20020_state_group; + dev->irq = pdev->irq; + lp->card_name = "PCI COM20020"; + lp->card_flags = ci->flags; + lp->backplane = backplane; + lp->clockp = clockp & 7; + lp->clockm = clockm & 3; + lp->timeout = timeout; + lp->hw.owner = THIS_MODULE; + + lp->backplane = (inb(priv->misc) >> (2 + i)) & 0x1; + + if (!strncmp(ci->name, "EAE PLX-PCI FB2", 15)) + lp->backplane = 1; + + if (ci->flags & ARC_HAS_ROTARY) { + /* Get the dev_id from the PLX rotary coder */ + if (!strncmp(ci->name, "EAE PLX-PCI MA1", 15)) + dev_id_mask = 0x3; + dev->dev_id = (inb(priv->misc + ci->rotary) >> 4) & dev_id_mask; + snprintf(dev->name, sizeof(dev->name), "arc%d-%d", dev->dev_id, i); + } + + if (arcnet_inb(ioaddr, COM20020_REG_R_STATUS) == 0xFF) { + pr_err("IO address %Xh is empty!\n", ioaddr); + ret = -EIO; + goto err_free_arcdev; + } + if (com20020_check(dev)) { + ret = -EIO; + goto err_free_arcdev; + } + + ret = com20020_found(dev, IRQF_SHARED); + if (ret) + goto err_free_arcdev; + + card = devm_kzalloc(&pdev->dev, sizeof(struct com20020_dev), + GFP_KERNEL); + if (!card) { + ret = -ENOMEM; + goto err_free_arcdev; + } + + card->index = i; + card->pci_priv = priv; + + if (ci->flags & ARC_HAS_LED) { + card->tx_led.brightness_set = led_tx_set; + card->tx_led.default_trigger = devm_kasprintf(&pdev->dev, + GFP_KERNEL, "arc%d-%d-tx", + dev->dev_id, i); + card->tx_led.name = devm_kasprintf(&pdev->dev, GFP_KERNEL, + "pci:green:tx:%d-%d", + dev->dev_id, i); + + card->tx_led.dev = &dev->dev; + card->recon_led.brightness_set = led_recon_set; + card->recon_led.default_trigger = devm_kasprintf(&pdev->dev, + GFP_KERNEL, "arc%d-%d-recon", + dev->dev_id, i); + card->recon_led.name = devm_kasprintf(&pdev->dev, GFP_KERNEL, + "pci:red:recon:%d-%d", + dev->dev_id, i); + card->recon_led.dev = &dev->dev; + + ret = devm_led_classdev_register(&pdev->dev, &card->tx_led); + if (ret) + goto err_free_arcdev; + + ret = devm_led_classdev_register(&pdev->dev, &card->recon_led); + if (ret) + goto err_free_arcdev; + + dev_set_drvdata(&dev->dev, card); + devm_arcnet_led_init(dev, dev->dev_id, i); + } + + card->dev = dev; + list_add(&card->list, &priv->list_dev); + continue; + +err_free_arcdev: + free_arcdev(dev); + break; + } + if (ret) + com20020pci_remove(pdev); + return ret; +} + +static void com20020pci_remove(struct pci_dev *pdev) +{ + struct com20020_dev *card, *tmpcard; + struct com20020_priv *priv; + + priv = pci_get_drvdata(pdev); + + list_for_each_entry_safe(card, tmpcard, &priv->list_dev, list) { + struct net_device *dev = card->dev; + + unregister_netdev(dev); + free_irq(dev->irq, dev); + free_arcdev(dev); + } +} + +static struct com20020_pci_card_info card_info_10mbit = { + .name = "ARC-PCI", + .devcount = 1, + .chan_map_tbl = { + { + .bar = 2, + .offset = 0x00, + .size = 0x08, + }, + }, + .flags = ARC_CAN_10MBIT, +}; + +static struct com20020_pci_card_info card_info_5mbit = { + .name = "ARC-PCI", + .devcount = 1, + .chan_map_tbl = { + { + .bar = 2, + .offset = 0x00, + .size = 0x08, + }, + }, + .flags = ARC_IS_5MBIT, +}; + +static struct com20020_pci_card_info card_info_sohard = { + .name = "SOHARD SH ARC-PCI", + .devcount = 1, + /* SOHARD needs PCI base addr 4 */ + .chan_map_tbl = { + { + .bar = 4, + .offset = 0x00, + .size = 0x08 + }, + }, + .flags = ARC_CAN_10MBIT, +}; + +static struct com20020_pci_card_info card_info_eae_arc1 = { + .name = "EAE PLX-PCI ARC1", + .devcount = 1, + .chan_map_tbl = { + { + .bar = 2, + .offset = 0x00, + .size = 0x08, + }, + }, + .misc_map = { + .bar = 2, + .offset = 0x10, + .size = 0x04, + }, + .leds = { + { + .green = 0x0, + .red = 0x1, + }, + }, + .rotary = 0x0, + .flags = ARC_HAS_ROTARY | ARC_HAS_LED | ARC_CAN_10MBIT, +}; + +static struct com20020_pci_card_info card_info_eae_ma1 = { + .name = "EAE PLX-PCI MA1", + .devcount = 2, + .chan_map_tbl = { + { + .bar = 2, + .offset = 0x00, + .size = 0x08, + }, { + .bar = 2, + .offset = 0x08, + .size = 0x08, + } + }, + .misc_map = { + .bar = 2, + .offset = 0x10, + .size = 0x04, + }, + .leds = { + { + .green = 0x0, + .red = 0x1, + }, { + .green = 0x2, + .red = 0x3, + }, + }, + .rotary = 0x0, + .flags = ARC_HAS_ROTARY | ARC_HAS_LED | ARC_CAN_10MBIT, +}; + +static struct com20020_pci_card_info card_info_eae_fb2 = { + .name = "EAE PLX-PCI FB2", + .devcount = 1, + .chan_map_tbl = { + { + .bar = 2, + .offset = 0x00, + .size = 0x08, + }, + }, + .misc_map = { + .bar = 2, + .offset = 0x10, + .size = 0x04, + }, + .leds = { + { + .green = 0x0, + .red = 0x1, + }, + }, + .rotary = 0x0, + .flags = ARC_HAS_ROTARY | ARC_HAS_LED | ARC_CAN_10MBIT, +}; + +static const struct pci_device_id com20020pci_id_table[] = { + { + 0x1571, 0xa001, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + 0, + }, + { + 0x1571, 0xa002, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + 0, + }, + { + 0x1571, 0xa003, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + 0 + }, + { + 0x1571, 0xa004, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + 0, + }, + { + 0x1571, 0xa005, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + 0 + }, + { + 0x1571, 0xa006, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + 0 + }, + { + 0x1571, 0xa007, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + 0 + }, + { + 0x1571, 0xa008, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + 0 + }, + { + 0x1571, 0xa009, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + (kernel_ulong_t)&card_info_5mbit + }, + { + 0x1571, 0xa00a, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + (kernel_ulong_t)&card_info_5mbit + }, + { + 0x1571, 0xa00b, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + (kernel_ulong_t)&card_info_5mbit + }, + { + 0x1571, 0xa00c, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + (kernel_ulong_t)&card_info_5mbit + }, + { + 0x1571, 0xa00d, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + (kernel_ulong_t)&card_info_5mbit + }, + { + 0x1571, 0xa00e, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + (kernel_ulong_t)&card_info_5mbit + }, + { + 0x1571, 0xa201, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + (kernel_ulong_t)&card_info_10mbit + }, + { + 0x1571, 0xa202, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + (kernel_ulong_t)&card_info_10mbit + }, + { + 0x1571, 0xa203, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + (kernel_ulong_t)&card_info_10mbit + }, + { + 0x1571, 0xa204, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + (kernel_ulong_t)&card_info_10mbit + }, + { + 0x1571, 0xa205, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + (kernel_ulong_t)&card_info_10mbit + }, + { + 0x1571, 0xa206, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + (kernel_ulong_t)&card_info_10mbit + }, + { + 0x10B5, 0x9030, + 0x10B5, 0x2978, + 0, 0, + (kernel_ulong_t)&card_info_sohard + }, + { + 0x10B5, 0x9050, + 0x10B5, 0x2273, + 0, 0, + (kernel_ulong_t)&card_info_sohard + }, + { + 0x10B5, 0x9050, + 0x10B5, 0x3263, + 0, 0, + (kernel_ulong_t)&card_info_eae_arc1 + }, + { + 0x10B5, 0x9050, + 0x10B5, 0x3292, + 0, 0, + (kernel_ulong_t)&card_info_eae_ma1 + }, + { + 0x10B5, 0x9050, + 0x10B5, 0x3294, + 0, 0, + (kernel_ulong_t)&card_info_eae_fb2 + }, + { + 0x14BA, 0x6000, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + (kernel_ulong_t)&card_info_10mbit + }, + { + 0x10B5, 0x2200, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + (kernel_ulong_t)&card_info_10mbit + }, + { 0, } +}; + +MODULE_DEVICE_TABLE(pci, com20020pci_id_table); + +static struct pci_driver com20020pci_driver = { + .name = "com20020", + .id_table = com20020pci_id_table, + .probe = com20020pci_probe, + .remove = com20020pci_remove, +}; + +static int __init com20020pci_init(void) +{ + if (BUGLVL(D_NORMAL)) + pr_info("%s\n", "COM20020 PCI support"); + return pci_register_driver(&com20020pci_driver); +} + +static void __exit com20020pci_cleanup(void) +{ + pci_unregister_driver(&com20020pci_driver); +} + +module_init(com20020pci_init) +module_exit(com20020pci_cleanup) diff --git a/drivers/net/arcnet/com20020.c b/drivers/net/arcnet/com20020.c new file mode 100644 index 000000000..06e1651b5 --- /dev/null +++ b/drivers/net/arcnet/com20020.c @@ -0,0 +1,418 @@ +/* + * Linux ARCnet driver - COM20020 chipset support + * + * Written 1997 by David Woodhouse. + * Written 1994-1999 by Avery Pennarun. + * Written 1999 by Martin Mares . + * Derived from skeleton.c by Donald Becker. + * + * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com) + * for sponsoring the further development of this driver. + * + * ********************** + * + * The original copyright of skeleton.c was as follows: + * + * skeleton.c Written 1993 by Donald Becker. + * Copyright 1993 United States Government as represented by the + * Director, National Security Agency. This software may only be used + * and distributed according to the terms of the GNU General Public License as + * modified by SRC, incorporated herein by reference. + * + * ********************** + * + * For more details, see drivers/net/arcnet.c + * + * ********************** + */ + +#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "arcdevice.h" +#include "com20020.h" + +static const char * const clockrates[] = { + "XXXXXXX", "XXXXXXXX", "XXXXXX", "2.5 Mb/s", + "1.25Mb/s", "625 Kb/s", "312.5 Kb/s", "156.25 Kb/s", + "Reserved", "Reserved", "Reserved" +}; + +static void com20020_command(struct net_device *dev, int command); +static int com20020_status(struct net_device *dev); +static void com20020_setmask(struct net_device *dev, int mask); +static int com20020_reset(struct net_device *dev, int really_reset); +static void com20020_copy_to_card(struct net_device *dev, int bufnum, + int offset, void *buf, int count); +static void com20020_copy_from_card(struct net_device *dev, int bufnum, + int offset, void *buf, int count); +static void com20020_set_mc_list(struct net_device *dev); +static void com20020_close(struct net_device *); + +static void com20020_copy_from_card(struct net_device *dev, int bufnum, + int offset, void *buf, int count) +{ + int ioaddr = dev->base_addr, ofs = 512 * bufnum + offset; + + /* set up the address register */ + arcnet_outb((ofs >> 8) | RDDATAflag | AUTOINCflag, + ioaddr, COM20020_REG_W_ADDR_HI); + arcnet_outb(ofs & 0xff, ioaddr, COM20020_REG_W_ADDR_LO); + + /* copy the data */ + TIME(dev, "insb", count, + arcnet_insb(ioaddr, COM20020_REG_RW_MEMDATA, buf, count)); +} + +static void com20020_copy_to_card(struct net_device *dev, int bufnum, + int offset, void *buf, int count) +{ + int ioaddr = dev->base_addr, ofs = 512 * bufnum + offset; + + /* set up the address register */ + arcnet_outb((ofs >> 8) | AUTOINCflag, ioaddr, COM20020_REG_W_ADDR_HI); + arcnet_outb(ofs & 0xff, ioaddr, COM20020_REG_W_ADDR_LO); + + /* copy the data */ + TIME(dev, "outsb", count, + arcnet_outsb(ioaddr, COM20020_REG_RW_MEMDATA, buf, count)); +} + +/* Reset the card and check some basic stuff during the detection stage. */ +int com20020_check(struct net_device *dev) +{ + int ioaddr = dev->base_addr, status; + struct arcnet_local *lp = netdev_priv(dev); + + arcnet_outb(XTOcfg(3) | RESETcfg, ioaddr, COM20020_REG_W_CONFIG); + udelay(5); + arcnet_outb(XTOcfg(3), ioaddr, COM20020_REG_W_CONFIG); + mdelay(RESETtime); + + lp->setup = lp->clockm ? 0 : (lp->clockp << 1); + lp->setup2 = (lp->clockm << 4) | 8; + + /* CHECK: should we do this for SOHARD cards ? */ + /* Enable P1Mode for backplane mode */ + lp->setup = lp->setup | P1MODE; + + com20020_set_subaddress(lp, ioaddr, SUB_SETUP1); + arcnet_outb(lp->setup, ioaddr, COM20020_REG_W_XREG); + + if (lp->clockm != 0) { + com20020_set_subaddress(lp, ioaddr, SUB_SETUP2); + arcnet_outb(lp->setup2, ioaddr, COM20020_REG_W_XREG); + + /* must now write the magic "restart operation" command */ + mdelay(1); + arcnet_outb(STARTIOcmd, ioaddr, COM20020_REG_W_COMMAND); + } + + lp->config = (lp->timeout << 3) | (lp->backplane << 2) | SUB_NODE; + /* set node ID to 0x42 (but transmitter is disabled, so it's okay) */ + arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); + arcnet_outb(0x42, ioaddr, COM20020_REG_W_XREG); + + status = arcnet_inb(ioaddr, COM20020_REG_R_STATUS); + + if ((status & 0x99) != (NORXflag | TXFREEflag | RESETflag)) { + arc_printk(D_NORMAL, dev, "status invalid (%Xh).\n", status); + return -ENODEV; + } + arc_printk(D_INIT_REASONS, dev, "status after reset: %X\n", status); + + arcnet_outb(CFLAGScmd | RESETclear | CONFIGclear, + ioaddr, COM20020_REG_W_COMMAND); + status = arcnet_inb(ioaddr, COM20020_REG_R_STATUS); + arc_printk(D_INIT_REASONS, dev, "status after reset acknowledged: %X\n", + status); + + /* Read first location of memory */ + arcnet_outb(0 | RDDATAflag | AUTOINCflag, + ioaddr, COM20020_REG_W_ADDR_HI); + arcnet_outb(0, ioaddr, COM20020_REG_W_ADDR_LO); + + status = arcnet_inb(ioaddr, COM20020_REG_RW_MEMDATA); + if (status != TESTvalue) { + arc_printk(D_NORMAL, dev, "Signature byte not found (%02Xh != D1h).\n", + status); + return -ENODEV; + } + return 0; +} + +static int com20020_set_hwaddr(struct net_device *dev, void *addr) +{ + int ioaddr = dev->base_addr; + struct arcnet_local *lp = netdev_priv(dev); + struct sockaddr *hwaddr = addr; + + dev_addr_set(dev, hwaddr->sa_data); + com20020_set_subaddress(lp, ioaddr, SUB_NODE); + arcnet_outb(dev->dev_addr[0], ioaddr, COM20020_REG_W_XREG); + + return 0; +} + +static int com20020_netdev_open(struct net_device *dev) +{ + int ioaddr = dev->base_addr; + struct arcnet_local *lp = netdev_priv(dev); + + lp->config |= TXENcfg; + arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); + + return arcnet_open(dev); +} + +static int com20020_netdev_close(struct net_device *dev) +{ + int ioaddr = dev->base_addr; + struct arcnet_local *lp = netdev_priv(dev); + + arcnet_close(dev); + + /* disable transmitter */ + lp->config &= ~TXENcfg; + arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); + return 0; +} + +const struct net_device_ops com20020_netdev_ops = { + .ndo_open = com20020_netdev_open, + .ndo_stop = com20020_netdev_close, + .ndo_start_xmit = arcnet_send_packet, + .ndo_tx_timeout = arcnet_timeout, + .ndo_set_mac_address = com20020_set_hwaddr, + .ndo_set_rx_mode = com20020_set_mc_list, +}; + +/* Set up the struct net_device associated with this card. Called after + * probing succeeds. + */ +int com20020_found(struct net_device *dev, int shared) +{ + struct arcnet_local *lp; + int ioaddr = dev->base_addr; + + /* Initialize the rest of the device structure. */ + + lp = netdev_priv(dev); + + lp->hw.owner = THIS_MODULE; + lp->hw.command = com20020_command; + lp->hw.status = com20020_status; + lp->hw.intmask = com20020_setmask; + lp->hw.reset = com20020_reset; + lp->hw.copy_to_card = com20020_copy_to_card; + lp->hw.copy_from_card = com20020_copy_from_card; + lp->hw.close = com20020_close; + + /* FIXME: do this some other way! */ + if (!dev->dev_addr[0]) + arcnet_set_addr(dev, arcnet_inb(ioaddr, 8)); + + com20020_set_subaddress(lp, ioaddr, SUB_SETUP1); + arcnet_outb(lp->setup, ioaddr, COM20020_REG_W_XREG); + + if (lp->card_flags & ARC_CAN_10MBIT) { + com20020_set_subaddress(lp, ioaddr, SUB_SETUP2); + arcnet_outb(lp->setup2, ioaddr, COM20020_REG_W_XREG); + + /* must now write the magic "restart operation" command */ + mdelay(1); + arcnet_outb(STARTIOcmd, ioaddr, COM20020_REG_W_COMMAND); + } + + lp->config = (lp->timeout << 3) | (lp->backplane << 2) | SUB_NODE; + /* Default 0x38 + register: Node ID */ + arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); + arcnet_outb(dev->dev_addr[0], ioaddr, COM20020_REG_W_XREG); + + /* reserve the irq */ + if (request_irq(dev->irq, arcnet_interrupt, shared, + "arcnet (COM20020)", dev)) { + arc_printk(D_NORMAL, dev, "Can't get IRQ %d!\n", dev->irq); + return -ENODEV; + } + + arc_printk(D_NORMAL, dev, "%s: station %02Xh found at %03lXh, IRQ %d.\n", + lp->card_name, dev->dev_addr[0], dev->base_addr, dev->irq); + + if (lp->backplane) + arc_printk(D_NORMAL, dev, "Using backplane mode.\n"); + + if (lp->timeout != 3) + arc_printk(D_NORMAL, dev, "Using extended timeout value of %d\n", + lp->timeout); + + arc_printk(D_NORMAL, dev, "Using CKP %d - data rate %s\n", + lp->setup >> 1, + clockrates[3 - + ((lp->setup2 & 0xF0) >> 4) + + ((lp->setup & 0x0F) >> 1)]); + /* The clockrates array index looks very fragile. + * It seems like it could have negative indexing. + */ + + if (register_netdev(dev)) { + free_irq(dev->irq, dev); + return -EIO; + } + return 0; +} + +/* Do a hardware reset on the card, and set up necessary registers. + * + * This should be called as little as possible, because it disrupts the + * token on the network (causes a RECON) and requires a significant delay. + * + * However, it does make sure the card is in a defined state. + */ +static int com20020_reset(struct net_device *dev, int really_reset) +{ + struct arcnet_local *lp = netdev_priv(dev); + u_int ioaddr = dev->base_addr; + u_char inbyte; + + arc_printk(D_DEBUG, dev, "%s: %d: %s: dev: %p, lp: %p, dev->name: %s\n", + __FILE__, __LINE__, __func__, dev, lp, dev->name); + arc_printk(D_INIT, dev, "Resetting %s (status=%02Xh)\n", + dev->name, arcnet_inb(ioaddr, COM20020_REG_R_STATUS)); + + arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__); + lp->config |= (lp->timeout << 3) | (lp->backplane << 2); + /* power-up defaults */ + arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); + arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__); + + if (really_reset) { + /* reset the card */ + arcnet_outb(lp->config | RESETcfg, ioaddr, COM20020_REG_W_CONFIG); + udelay(5); + arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); + mdelay(RESETtime * 2); + /* COM20020 seems to be slower sometimes */ + } + /* clear flags & end reset */ + arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__); + arcnet_outb(CFLAGScmd | RESETclear | CONFIGclear, + ioaddr, COM20020_REG_W_COMMAND); + + /* verify that the ARCnet signature byte is present */ + arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__); + + com20020_copy_from_card(dev, 0, 0, &inbyte, 1); + arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__); + if (inbyte != TESTvalue) { + arc_printk(D_DEBUG, dev, "%s: %d: %s\n", + __FILE__, __LINE__, __func__); + arc_printk(D_NORMAL, dev, "reset failed: TESTvalue not present.\n"); + return 1; + } + /* enable extended (512-byte) packets */ + arcnet_outb(CONFIGcmd | EXTconf, ioaddr, COM20020_REG_W_COMMAND); + + arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__); + + /* done! return success. */ + return 0; +} + +static void com20020_setmask(struct net_device *dev, int mask) +{ + u_int ioaddr = dev->base_addr; + + arc_printk(D_DURING, dev, "Setting mask to %x at %x\n", mask, ioaddr); + arcnet_outb(mask, ioaddr, COM20020_REG_W_INTMASK); +} + +static void com20020_command(struct net_device *dev, int cmd) +{ + u_int ioaddr = dev->base_addr; + + arcnet_outb(cmd, ioaddr, COM20020_REG_W_COMMAND); +} + +static int com20020_status(struct net_device *dev) +{ + u_int ioaddr = dev->base_addr; + + return arcnet_inb(ioaddr, COM20020_REG_R_STATUS) + + (arcnet_inb(ioaddr, COM20020_REG_R_DIAGSTAT) << 8); +} + +static void com20020_close(struct net_device *dev) +{ + struct arcnet_local *lp = netdev_priv(dev); + int ioaddr = dev->base_addr; + + /* disable transmitter */ + lp->config &= ~TXENcfg; + arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); +} + +/* Set or clear the multicast filter for this adaptor. + * num_addrs == -1 Promiscuous mode, receive all packets + * num_addrs == 0 Normal mode, clear multicast list + * num_addrs > 0 Multicast mode, receive normal and MC packets, and do + * best-effort filtering. + * FIXME - do multicast stuff, not just promiscuous. + */ +static void com20020_set_mc_list(struct net_device *dev) +{ + struct arcnet_local *lp = netdev_priv(dev); + int ioaddr = dev->base_addr; + + if ((dev->flags & IFF_PROMISC) && (dev->flags & IFF_UP)) { + /* Enable promiscuous mode */ + if (!(lp->setup & PROMISCset)) + arc_printk(D_NORMAL, dev, "Setting promiscuous flag...\n"); + com20020_set_subaddress(lp, ioaddr, SUB_SETUP1); + lp->setup |= PROMISCset; + arcnet_outb(lp->setup, ioaddr, COM20020_REG_W_XREG); + } else { + /* Disable promiscuous mode, use normal mode */ + if ((lp->setup & PROMISCset)) + arc_printk(D_NORMAL, dev, "Resetting promiscuous flag...\n"); + com20020_set_subaddress(lp, ioaddr, SUB_SETUP1); + lp->setup &= ~PROMISCset; + arcnet_outb(lp->setup, ioaddr, COM20020_REG_W_XREG); + } +} + +#if defined(CONFIG_ARCNET_COM20020_PCI_MODULE) || \ + defined(CONFIG_ARCNET_COM20020_ISA_MODULE) || \ + defined(CONFIG_ARCNET_COM20020_CS_MODULE) +EXPORT_SYMBOL(com20020_check); +EXPORT_SYMBOL(com20020_found); +EXPORT_SYMBOL(com20020_netdev_ops); +#endif + +MODULE_LICENSE("GPL"); + +#ifdef MODULE + +static int __init com20020_module_init(void) +{ + if (BUGLVL(D_NORMAL)) + pr_info("%s\n", "COM20020 chipset support (by David Woodhouse et al.)"); + return 0; +} + +static void __exit com20020_module_exit(void) +{ +} +module_init(com20020_module_init); +module_exit(com20020_module_exit); +#endif /* MODULE */ diff --git a/drivers/net/arcnet/com20020.h b/drivers/net/arcnet/com20020.h new file mode 100644 index 000000000..0bcc5d0a6 --- /dev/null +++ b/drivers/net/arcnet/com20020.h @@ -0,0 +1,132 @@ +/* + * Linux ARCnet driver - COM20020 chipset support - function declarations + * + * Written 1997 by David Woodhouse. + * Written 1994-1999 by Avery Pennarun. + * Derived from skeleton.c by Donald Becker. + * + * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com) + * for sponsoring the further development of this driver. + * + * ********************** + * + * The original copyright of skeleton.c was as follows: + * + * skeleton.c Written 1993 by Donald Becker. + * Copyright 1993 United States Government as represented by the + * Director, National Security Agency. This software may only be used + * and distributed according to the terms of the GNU General Public License as + * modified by SRC, incorporated herein by reference. + * + * ********************** + * + * For more details, see drivers/net/arcnet.c + * + * ********************** + */ +#ifndef __COM20020_H +#define __COM20020_H +#include + +int com20020_check(struct net_device *dev); +int com20020_found(struct net_device *dev, int shared); +extern const struct net_device_ops com20020_netdev_ops; + +/* The number of low I/O ports used by the card. */ +#define ARCNET_TOTAL_SIZE 8 + +#define PLX_PCI_MAX_CARDS 2 + +struct ledoffsets { + int green; + int red; +}; + +struct com20020_pci_channel_map { + u32 bar; + u32 offset; + u32 size; /* 0x00 - auto, e.g. length of entire bar */ +}; + +struct com20020_pci_card_info { + const char *name; + int devcount; + + struct com20020_pci_channel_map chan_map_tbl[PLX_PCI_MAX_CARDS]; + struct com20020_pci_channel_map misc_map; + + struct ledoffsets leds[PLX_PCI_MAX_CARDS]; + int rotary; + + unsigned int flags; +}; + +struct com20020_priv { + struct com20020_pci_card_info *ci; + struct list_head list_dev; + resource_size_t misc; +}; + +struct com20020_dev { + struct list_head list; + struct net_device *dev; + + struct led_classdev tx_led; + struct led_classdev recon_led; + + struct com20020_priv *pci_priv; + int index; +}; + +#define COM20020_REG_W_INTMASK 0 /* writable */ +#define COM20020_REG_R_STATUS 0 /* readable */ +#define COM20020_REG_W_COMMAND 1 /* standard arcnet commands */ +#define COM20020_REG_R_DIAGSTAT 1 /* diagnostic status */ +#define COM20020_REG_W_ADDR_HI 2 /* control for IO-mapped memory */ +#define COM20020_REG_W_ADDR_LO 3 +#define COM20020_REG_RW_MEMDATA 4 /* data port for IO-mapped memory */ +#define COM20020_REG_W_SUBADR 5 /* the extended port _XREG refers to */ +#define COM20020_REG_W_CONFIG 6 /* configuration */ +#define COM20020_REG_W_XREG 7 /* extra + * (indexed by _CONFIG or _SUBADDR) + */ + +/* in the ADDR_HI register */ +#define RDDATAflag 0x80 /* next access is a read (not a write) */ + +/* in the DIAGSTAT register */ +#define NEWNXTIDflag 0x02 /* ID to which token is passed has changed */ + +/* in the CONFIG register */ +#define RESETcfg 0x80 /* put card in reset state */ +#define TXENcfg 0x20 /* enable TX */ +#define XTOcfg(x) ((x) << 3) /* extended timeout */ + +/* in SETUP register */ +#define PROMISCset 0x10 /* enable RCV_ALL */ +#define P1MODE 0x80 /* enable P1-MODE for Backplane */ +#define SLOWARB 0x01 /* enable Slow Arbitration for >=5Mbps */ + +/* COM2002x */ +#define SUB_TENTATIVE 0 /* tentative node ID */ +#define SUB_NODE 1 /* node ID */ +#define SUB_SETUP1 2 /* various options */ +#define SUB_TEST 3 /* test/diag register */ + +/* COM20022 only */ +#define SUB_SETUP2 4 /* sundry options */ +#define SUB_BUSCTL 5 /* bus control options */ +#define SUB_DMACOUNT 6 /* DMA count options */ + +static inline void com20020_set_subaddress(struct arcnet_local *lp, + int ioaddr, int val) +{ + if (val < 4) { + lp->config = (lp->config & ~0x03) | val; + arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); + } else { + arcnet_outb(val, ioaddr, COM20020_REG_W_SUBADR); + } +} + +#endif /* __COM20020_H */ diff --git a/drivers/net/arcnet/com20020_cs.c b/drivers/net/arcnet/com20020_cs.c new file mode 100644 index 000000000..dc3253b31 --- /dev/null +++ b/drivers/net/arcnet/com20020_cs.c @@ -0,0 +1,329 @@ +/* + * Linux ARCnet driver - COM20020 PCMCIA support + * + * Written 1994-1999 by Avery Pennarun, + * based on an ISA version by David Woodhouse. + * Derived from ibmtr_cs.c by Steve Kipisz (pcmcia-cs 3.1.4) + * which was derived from pcnet_cs.c by David Hinds. + * Some additional portions derived from skeleton.c by Donald Becker. + * + * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com) + * for sponsoring the further development of this driver. + * + * ********************** + * + * The original copyright of skeleton.c was as follows: + * + * skeleton.c Written 1993 by Donald Becker. + * Copyright 1993 United States Government as represented by the + * Director, National Security Agency. This software may only be used + * and distributed according to the terms of the GNU General Public License as + * modified by SRC, incorporated herein by reference. + * + * ********************** + * Changes: + * Arnaldo Carvalho de Melo - 08/08/2000 + * - reorganize kmallocs in com20020_attach, checking all for failure + * and releasing the previous allocations if one fails + * ********************** + * + * For more details, see drivers/net/arcnet.c + * + * ********************** + */ + +#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "arcdevice.h" +#include "com20020.h" + +static void regdump(struct net_device *dev) +{ +#ifdef DEBUG + int ioaddr = dev->base_addr; + int count; + + netdev_dbg(dev, "register dump:\n"); + for (count = 0; count < 16; count++) { + if (!(count % 16)) + pr_cont("%04X:", ioaddr + count); + pr_cont(" %02X", arcnet_inb(ioaddr, count)); + } + pr_cont("\n"); + + netdev_dbg(dev, "buffer0 dump:\n"); + /* set up the address register */ + count = 0; + arcnet_outb((count >> 8) | RDDATAflag | AUTOINCflag, + ioaddr, COM20020_REG_W_ADDR_HI); + arcnet_outb(count & 0xff, ioaddr, COM20020_REG_W_ADDR_LO); + + for (count = 0; count < 256 + 32; count++) { + if (!(count % 16)) + pr_cont("%04X:", count); + + /* copy the data */ + pr_cont(" %02X", arcnet_inb(ioaddr, COM20020_REG_RW_MEMDATA)); + } + pr_cont("\n"); +#endif +} + +/*====================================================================*/ + +/* Parameters that can be set with 'insmod' */ + +static int node; +static int timeout = 3; +static int backplane; +static int clockp; +static int clockm; + +module_param(node, int, 0); +module_param(timeout, int, 0); +module_param(backplane, int, 0); +module_param(clockp, int, 0); +module_param(clockm, int, 0); + +MODULE_LICENSE("GPL"); + +/*====================================================================*/ + +static int com20020_config(struct pcmcia_device *link); +static void com20020_release(struct pcmcia_device *link); + +static void com20020_detach(struct pcmcia_device *p_dev); + +/*====================================================================*/ + +static int com20020_probe(struct pcmcia_device *p_dev) +{ + struct com20020_dev *info; + struct net_device *dev; + struct arcnet_local *lp; + int ret = -ENOMEM; + + dev_dbg(&p_dev->dev, "com20020_attach()\n"); + + /* Create new network device */ + info = kzalloc(sizeof(*info), GFP_KERNEL); + if (!info) + goto fail_alloc_info; + + dev = alloc_arcdev(""); + if (!dev) + goto fail_alloc_dev; + + lp = netdev_priv(dev); + lp->timeout = timeout; + lp->backplane = backplane; + lp->clockp = clockp; + lp->clockm = clockm & 3; + lp->hw.owner = THIS_MODULE; + + /* fill in our module parameters as defaults */ + arcnet_set_addr(dev, node); + + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->resource[0]->end = 16; + p_dev->config_flags |= CONF_ENABLE_IRQ; + + info->dev = dev; + p_dev->priv = info; + + ret = com20020_config(p_dev); + if (ret) + goto fail_config; + + return 0; + +fail_config: + free_arcdev(dev); +fail_alloc_dev: + kfree(info); +fail_alloc_info: + return ret; +} /* com20020_attach */ + +static void com20020_detach(struct pcmcia_device *link) +{ + struct com20020_dev *info = link->priv; + struct net_device *dev = info->dev; + + dev_dbg(&link->dev, "detach...\n"); + + dev_dbg(&link->dev, "com20020_detach\n"); + + dev_dbg(&link->dev, "unregister...\n"); + + unregister_netdev(dev); + + /* this is necessary because we register our IRQ separately + * from card services. + */ + if (dev->irq) + free_irq(dev->irq, dev); + + com20020_release(link); + + /* Unlink device structure, free bits */ + dev_dbg(&link->dev, "unlinking...\n"); + if (link->priv) { + dev = info->dev; + if (dev) { + dev_dbg(&link->dev, "kfree...\n"); + free_arcdev(dev); + } + dev_dbg(&link->dev, "kfree2...\n"); + kfree(info); + } + +} /* com20020_detach */ + +static int com20020_config(struct pcmcia_device *link) +{ + struct arcnet_local *lp; + struct com20020_dev *info; + struct net_device *dev; + int i, ret; + int ioaddr; + + info = link->priv; + dev = info->dev; + + dev_dbg(&link->dev, "config...\n"); + + dev_dbg(&link->dev, "com20020_config\n"); + + dev_dbg(&link->dev, "baseport1 is %Xh\n", + (unsigned int)link->resource[0]->start); + + i = -ENODEV; + link->io_lines = 16; + + if (!link->resource[0]->start) { + for (ioaddr = 0x100; ioaddr < 0x400; ioaddr += 0x10) { + link->resource[0]->start = ioaddr; + i = pcmcia_request_io(link); + if (i == 0) + break; + } + } else { + i = pcmcia_request_io(link); + } + + if (i != 0) { + dev_dbg(&link->dev, "requestIO failed totally!\n"); + goto failed; + } + + ioaddr = dev->base_addr = link->resource[0]->start; + dev_dbg(&link->dev, "got ioaddr %Xh\n", ioaddr); + + dev_dbg(&link->dev, "request IRQ %d\n", + link->irq); + if (!link->irq) { + dev_dbg(&link->dev, "requestIRQ failed totally!\n"); + goto failed; + } + + dev->irq = link->irq; + + ret = pcmcia_enable_device(link); + if (ret) + goto failed; + + if (com20020_check(dev)) { + regdump(dev); + goto failed; + } + + lp = netdev_priv(dev); + lp->card_name = "PCMCIA COM20020"; + lp->card_flags = ARC_CAN_10MBIT; /* pretend all of them can 10Mbit */ + + SET_NETDEV_DEV(dev, &link->dev); + + i = com20020_found(dev, 0); /* calls register_netdev */ + + if (i != 0) { + dev_notice(&link->dev, + "com20020_found() failed\n"); + goto failed; + } + + netdev_dbg(dev, "port %#3lx, irq %d\n", + dev->base_addr, dev->irq); + return 0; + +failed: + dev_dbg(&link->dev, "com20020_config failed...\n"); + com20020_release(link); + return -ENODEV; +} /* com20020_config */ + +static void com20020_release(struct pcmcia_device *link) +{ + dev_dbg(&link->dev, "com20020_release\n"); + pcmcia_disable_device(link); +} + +static int com20020_suspend(struct pcmcia_device *link) +{ + struct com20020_dev *info = link->priv; + struct net_device *dev = info->dev; + + if (link->open) + netif_device_detach(dev); + + return 0; +} + +static int com20020_resume(struct pcmcia_device *link) +{ + struct com20020_dev *info = link->priv; + struct net_device *dev = info->dev; + + if (link->open) { + int ioaddr = dev->base_addr; + struct arcnet_local *lp = netdev_priv(dev); + + arcnet_outb(lp->config | 0x80, ioaddr, COM20020_REG_W_CONFIG); + udelay(5); + arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); + } + + return 0; +} + +static const struct pcmcia_device_id com20020_ids[] = { + PCMCIA_DEVICE_PROD_ID12("Contemporary Control Systems, Inc.", + "PCM20 Arcnet Adapter", 0x59991666, 0x95dfffaf), + PCMCIA_DEVICE_PROD_ID12("SoHard AG", + "SH ARC PCMCIA", 0xf8991729, 0x69dff0c7), + PCMCIA_DEVICE_NULL +}; +MODULE_DEVICE_TABLE(pcmcia, com20020_ids); + +static struct pcmcia_driver com20020_cs_driver = { + .owner = THIS_MODULE, + .name = "com20020_cs", + .probe = com20020_probe, + .remove = com20020_detach, + .id_table = com20020_ids, + .suspend = com20020_suspend, + .resume = com20020_resume, +}; +module_pcmcia_driver(com20020_cs_driver); diff --git a/drivers/net/arcnet/com9026.h b/drivers/net/arcnet/com9026.h new file mode 100644 index 000000000..6adbc1871 --- /dev/null +++ b/drivers/net/arcnet/com9026.h @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __COM9026_H +#define __COM9026_H + +/* COM 9026 controller chip --> ARCnet register addresses */ + +#define COM9026_REG_W_INTMASK 0 /* writable */ +#define COM9026_REG_R_STATUS 0 /* readable */ +#define COM9026_REG_W_COMMAND 1 /* writable, returns random vals on read (?) */ +#define COM9026_REG_RW_CONFIG 2 /* Configuration register */ +#define COM9026_REG_R_RESET 8 /* software reset (on read) */ +#define COM9026_REG_RW_MEMDATA 12 /* Data port for IO-mapped memory */ +#define COM9026_REG_W_ADDR_LO 14 /* Control registers for said */ +#define COM9026_REG_W_ADDR_HI 15 + +#define COM9026_REG_R_STATION 1 /* Station ID */ + +#endif diff --git a/drivers/net/arcnet/com90io.c b/drivers/net/arcnet/com90io.c new file mode 100644 index 000000000..37b47749f --- /dev/null +++ b/drivers/net/arcnet/com90io.c @@ -0,0 +1,426 @@ +/* + * Linux ARCnet driver - COM90xx chipset (IO-mapped buffers) + * + * Written 1997 by David Woodhouse. + * Written 1994-1999 by Avery Pennarun. + * Written 1999-2000 by Martin Mares . + * Derived from skeleton.c by Donald Becker. + * + * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com) + * for sponsoring the further development of this driver. + * + * ********************** + * + * The original copyright of skeleton.c was as follows: + * + * skeleton.c Written 1993 by Donald Becker. + * Copyright 1993 United States Government as represented by the + * Director, National Security Agency. This software may only be used + * and distributed according to the terms of the GNU General Public License as + * modified by SRC, incorporated herein by reference. + * + * ********************** + * + * For more details, see drivers/net/arcnet.c + * + * ********************** + */ + +#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "arcdevice.h" +#include "com9026.h" + +/* Internal function declarations */ + +static int com90io_found(struct net_device *dev); +static void com90io_command(struct net_device *dev, int command); +static int com90io_status(struct net_device *dev); +static void com90io_setmask(struct net_device *dev, int mask); +static int com90io_reset(struct net_device *dev, int really_reset); +static void com90io_copy_to_card(struct net_device *dev, int bufnum, int offset, + void *buf, int count); +static void com90io_copy_from_card(struct net_device *dev, int bufnum, + int offset, void *buf, int count); + +/* Handy defines for ARCnet specific stuff */ + +/* The number of low I/O ports used by the card. */ +#define ARCNET_TOTAL_SIZE 16 + +/**************************************************************************** + * * + * IO-mapped operation routines * + * * + ****************************************************************************/ + +#undef ONE_AT_A_TIME_TX +#undef ONE_AT_A_TIME_RX + +static u_char get_buffer_byte(struct net_device *dev, unsigned offset) +{ + int ioaddr = dev->base_addr; + + arcnet_outb(offset >> 8, ioaddr, COM9026_REG_W_ADDR_HI); + arcnet_outb(offset & 0xff, ioaddr, COM9026_REG_W_ADDR_LO); + + return arcnet_inb(ioaddr, COM9026_REG_RW_MEMDATA); +} + +#ifdef ONE_AT_A_TIME_TX +static void put_buffer_byte(struct net_device *dev, unsigned offset, + u_char datum) +{ + int ioaddr = dev->base_addr; + + arcnet_outb(offset >> 8, ioaddr, COM9026_REG_W_ADDR_HI); + arcnet_outb(offset & 0xff, ioaddr, COM9026_REG_W_ADDR_LO); + + arcnet_outb(datum, ioaddr, COM9026_REG_RW_MEMDATA); +} + +#endif + +static void get_whole_buffer(struct net_device *dev, unsigned offset, + unsigned length, char *dest) +{ + int ioaddr = dev->base_addr; + + arcnet_outb((offset >> 8) | AUTOINCflag, ioaddr, COM9026_REG_W_ADDR_HI); + arcnet_outb(offset & 0xff, ioaddr, COM9026_REG_W_ADDR_LO); + + while (length--) +#ifdef ONE_AT_A_TIME_RX + *(dest++) = get_buffer_byte(dev, offset++); +#else + *(dest++) = arcnet_inb(ioaddr, COM9026_REG_RW_MEMDATA); +#endif +} + +static void put_whole_buffer(struct net_device *dev, unsigned offset, + unsigned length, char *dest) +{ + int ioaddr = dev->base_addr; + + arcnet_outb((offset >> 8) | AUTOINCflag, ioaddr, COM9026_REG_W_ADDR_HI); + arcnet_outb(offset & 0xff, ioaddr,COM9026_REG_W_ADDR_LO); + + while (length--) +#ifdef ONE_AT_A_TIME_TX + put_buffer_byte(dev, offset++, *(dest++)); +#else + arcnet_outb(*(dest++), ioaddr, COM9026_REG_RW_MEMDATA); +#endif +} + +/* We cannot probe for an IO mapped card either, although we can check that + * it's where we were told it was, and even autoirq + */ +static int __init com90io_probe(struct net_device *dev) +{ + int ioaddr = dev->base_addr, status; + unsigned long airqmask; + + if (BUGLVL(D_NORMAL)) { + pr_info("%s\n", "COM90xx IO-mapped mode support (by David Woodhouse et el.)"); + pr_info("E-mail me if you actually test this driver, please!\n"); + } + + if (!ioaddr) { + arc_printk(D_NORMAL, dev, "No autoprobe for IO mapped cards; you must specify the base address!\n"); + return -ENODEV; + } + if (!request_region(ioaddr, ARCNET_TOTAL_SIZE, "com90io probe")) { + arc_printk(D_INIT_REASONS, dev, "IO request_region %x-%x failed\n", + ioaddr, ioaddr + ARCNET_TOTAL_SIZE - 1); + return -ENXIO; + } + if (arcnet_inb(ioaddr, COM9026_REG_R_STATUS) == 0xFF) { + arc_printk(D_INIT_REASONS, dev, "IO address %x empty\n", + ioaddr); + goto err_out; + } + arcnet_inb(ioaddr, COM9026_REG_R_RESET); + mdelay(RESETtime); + + status = arcnet_inb(ioaddr, COM9026_REG_R_STATUS); + + if ((status & 0x9D) != (NORXflag | RECONflag | TXFREEflag | RESETflag)) { + arc_printk(D_INIT_REASONS, dev, "Status invalid (%Xh)\n", + status); + goto err_out; + } + arc_printk(D_INIT_REASONS, dev, "Status after reset: %X\n", status); + + arcnet_outb(CFLAGScmd | RESETclear | CONFIGclear, + ioaddr, COM9026_REG_W_COMMAND); + + arc_printk(D_INIT_REASONS, dev, "Status after reset acknowledged: %X\n", + status); + + status = arcnet_inb(ioaddr, COM9026_REG_R_STATUS); + + if (status & RESETflag) { + arc_printk(D_INIT_REASONS, dev, "Eternal reset (status=%Xh)\n", + status); + goto err_out; + } + arcnet_outb((0x16 | IOMAPflag) & ~ENABLE16flag, + ioaddr, COM9026_REG_RW_CONFIG); + + /* Read first loc'n of memory */ + + arcnet_outb(AUTOINCflag, ioaddr, COM9026_REG_W_ADDR_HI); + arcnet_outb(0, ioaddr, COM9026_REG_W_ADDR_LO); + + status = arcnet_inb(ioaddr, COM9026_REG_RW_MEMDATA); + if (status != 0xd1) { + arc_printk(D_INIT_REASONS, dev, "Signature byte not found (%Xh instead).\n", + status); + goto err_out; + } + if (!dev->irq) { + /* if we do this, we're sure to get an IRQ since the + * card has just reset and the NORXflag is on until + * we tell it to start receiving. + */ + + airqmask = probe_irq_on(); + arcnet_outb(NORXflag, ioaddr, COM9026_REG_W_INTMASK); + udelay(1); + arcnet_outb(0, ioaddr, COM9026_REG_W_INTMASK); + dev->irq = probe_irq_off(airqmask); + + if ((int)dev->irq <= 0) { + arc_printk(D_INIT_REASONS, dev, "Autoprobe IRQ failed\n"); + goto err_out; + } + } + release_region(ioaddr, ARCNET_TOTAL_SIZE); /* end of probing */ + return com90io_found(dev); + +err_out: + release_region(ioaddr, ARCNET_TOTAL_SIZE); + return -ENODEV; +} + +/* Set up the struct net_device associated with this card. Called after + * probing succeeds. + */ +static int __init com90io_found(struct net_device *dev) +{ + struct arcnet_local *lp; + int ioaddr = dev->base_addr; + int err; + + /* Reserve the irq */ + if (request_irq(dev->irq, arcnet_interrupt, 0, + "arcnet (COM90xx-IO)", dev)) { + arc_printk(D_NORMAL, dev, "Can't get IRQ %d!\n", dev->irq); + return -ENODEV; + } + /* Reserve the I/O region */ + if (!request_region(dev->base_addr, ARCNET_TOTAL_SIZE, + "arcnet (COM90xx-IO)")) { + free_irq(dev->irq, dev); + return -EBUSY; + } + + lp = netdev_priv(dev); + lp->card_name = "COM90xx I/O"; + lp->hw.command = com90io_command; + lp->hw.status = com90io_status; + lp->hw.intmask = com90io_setmask; + lp->hw.reset = com90io_reset; + lp->hw.owner = THIS_MODULE; + lp->hw.copy_to_card = com90io_copy_to_card; + lp->hw.copy_from_card = com90io_copy_from_card; + + lp->config = (0x16 | IOMAPflag) & ~ENABLE16flag; + arcnet_outb(lp->config, ioaddr, COM9026_REG_RW_CONFIG); + + /* get and check the station ID from offset 1 in shmem */ + + arcnet_set_addr(dev, get_buffer_byte(dev, 1)); + + err = register_netdev(dev); + if (err) { + arcnet_outb(arcnet_inb(ioaddr, COM9026_REG_RW_CONFIG) & ~IOMAPflag, + ioaddr, COM9026_REG_RW_CONFIG); + free_irq(dev->irq, dev); + release_region(dev->base_addr, ARCNET_TOTAL_SIZE); + return err; + } + + arc_printk(D_NORMAL, dev, "COM90IO: station %02Xh found at %03lXh, IRQ %d.\n", + dev->dev_addr[0], dev->base_addr, dev->irq); + + return 0; +} + +/* Do a hardware reset on the card, and set up necessary registers. + * + * This should be called as little as possible, because it disrupts the + * token on the network (causes a RECON) and requires a significant delay. + * + * However, it does make sure the card is in a defined state. + */ +static int com90io_reset(struct net_device *dev, int really_reset) +{ + struct arcnet_local *lp = netdev_priv(dev); + short ioaddr = dev->base_addr; + + arc_printk(D_INIT, dev, "Resetting %s (status=%02Xh)\n", + dev->name, arcnet_inb(ioaddr, COM9026_REG_R_STATUS)); + + if (really_reset) { + /* reset the card */ + arcnet_inb(ioaddr, COM9026_REG_R_RESET); + mdelay(RESETtime); + } + /* Set the thing to IO-mapped, 8-bit mode */ + lp->config = (0x1C | IOMAPflag) & ~ENABLE16flag; + arcnet_outb(lp->config, ioaddr, COM9026_REG_RW_CONFIG); + + arcnet_outb(CFLAGScmd | RESETclear, ioaddr, COM9026_REG_W_COMMAND); + /* clear flags & end reset */ + arcnet_outb(CFLAGScmd | CONFIGclear, ioaddr, COM9026_REG_W_COMMAND); + + /* verify that the ARCnet signature byte is present */ + if (get_buffer_byte(dev, 0) != TESTvalue) { + arc_printk(D_NORMAL, dev, "reset failed: TESTvalue not present.\n"); + return 1; + } + /* enable extended (512-byte) packets */ + arcnet_outb(CONFIGcmd | EXTconf, ioaddr, COM9026_REG_W_COMMAND); + /* done! return success. */ + return 0; +} + +static void com90io_command(struct net_device *dev, int cmd) +{ + short ioaddr = dev->base_addr; + + arcnet_outb(cmd, ioaddr, COM9026_REG_W_COMMAND); +} + +static int com90io_status(struct net_device *dev) +{ + short ioaddr = dev->base_addr; + + return arcnet_inb(ioaddr, COM9026_REG_R_STATUS); +} + +static void com90io_setmask(struct net_device *dev, int mask) +{ + short ioaddr = dev->base_addr; + + arcnet_outb(mask, ioaddr, COM9026_REG_W_INTMASK); +} + +static void com90io_copy_to_card(struct net_device *dev, int bufnum, + int offset, void *buf, int count) +{ + TIME(dev, "put_whole_buffer", count, + put_whole_buffer(dev, bufnum * 512 + offset, count, buf)); +} + +static void com90io_copy_from_card(struct net_device *dev, int bufnum, + int offset, void *buf, int count) +{ + TIME(dev, "get_whole_buffer", count, + get_whole_buffer(dev, bufnum * 512 + offset, count, buf)); +} + +static int io; /* use the insmod io= irq= shmem= options */ +static int irq; +static char device[9]; /* use eg. device=arc1 to change name */ + +module_param_hw(io, int, ioport, 0); +module_param_hw(irq, int, irq, 0); +module_param_string(device, device, sizeof(device), 0); +MODULE_LICENSE("GPL"); + +#ifndef MODULE +static int __init com90io_setup(char *s) +{ + int ints[4]; + + s = get_options(s, 4, ints); + if (!ints[0]) + return 0; + switch (ints[0]) { + default: /* ERROR */ + pr_err("Too many arguments\n"); + fallthrough; + case 2: /* IRQ */ + irq = ints[2]; + fallthrough; + case 1: /* IO address */ + io = ints[1]; + } + if (*s) + snprintf(device, sizeof(device), "%s", s); + return 1; +} +__setup("com90io=", com90io_setup); +#endif + +static struct net_device *my_dev; + +static int __init com90io_init(void) +{ + struct net_device *dev; + int err; + + dev = alloc_arcdev(device); + if (!dev) + return -ENOMEM; + + dev->base_addr = io; + dev->irq = irq; + if (dev->irq == 2) + dev->irq = 9; + + err = com90io_probe(dev); + + if (err) { + free_arcdev(dev); + return err; + } + + my_dev = dev; + return 0; +} + +static void __exit com90io_exit(void) +{ + struct net_device *dev = my_dev; + int ioaddr = dev->base_addr; + + unregister_netdev(dev); + + /* In case the old driver is loaded later, + * set the thing back to MMAP mode + */ + arcnet_outb(arcnet_inb(ioaddr, COM9026_REG_RW_CONFIG) & ~IOMAPflag, + ioaddr, COM9026_REG_RW_CONFIG); + + free_irq(dev->irq, dev); + release_region(dev->base_addr, ARCNET_TOTAL_SIZE); + free_arcdev(dev); +} + +module_init(com90io_init) +module_exit(com90io_exit) diff --git a/drivers/net/arcnet/com90xx.c b/drivers/net/arcnet/com90xx.c new file mode 100644 index 000000000..f49dae194 --- /dev/null +++ b/drivers/net/arcnet/com90xx.c @@ -0,0 +1,715 @@ +/* + * Linux ARCnet driver - COM90xx chipset (memory-mapped buffers) + * + * Written 1994-1999 by Avery Pennarun. + * Written 1999 by Martin Mares . + * Derived from skeleton.c by Donald Becker. + * + * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com) + * for sponsoring the further development of this driver. + * + * ********************** + * + * The original copyright of skeleton.c was as follows: + * + * skeleton.c Written 1993 by Donald Becker. + * Copyright 1993 United States Government as represented by the + * Director, National Security Agency. This software may only be used + * and distributed according to the terms of the GNU General Public License as + * modified by SRC, incorporated herein by reference. + * + * ********************** + * + * For more details, see drivers/net/arcnet.c + * + * ********************** + */ + +#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "arcdevice.h" +#include "com9026.h" + +/* Define this to speed up the autoprobe by assuming if only one io port and + * shmem are left in the list at Stage 5, they must correspond to each + * other. + * + * This is undefined by default because it might not always be true, and the + * extra check makes the autoprobe even more careful. Speed demons can turn + * it on - I think it should be fine if you only have one ARCnet card + * installed. + * + * If no ARCnet cards are installed, this delay never happens anyway and thus + * the option has no effect. + */ +#undef FAST_PROBE + +/* Internal function declarations */ +static int com90xx_found(int ioaddr, int airq, u_long shmem, void __iomem *); +static void com90xx_command(struct net_device *dev, int command); +static int com90xx_status(struct net_device *dev); +static void com90xx_setmask(struct net_device *dev, int mask); +static int com90xx_reset(struct net_device *dev, int really_reset); +static void com90xx_copy_to_card(struct net_device *dev, int bufnum, int offset, + void *buf, int count); +static void com90xx_copy_from_card(struct net_device *dev, int bufnum, + int offset, void *buf, int count); + +/* Known ARCnet cards */ + +static struct net_device *cards[16]; +static int numcards; + +/* Handy defines for ARCnet specific stuff */ + +/* The number of low I/O ports used by the card */ +#define ARCNET_TOTAL_SIZE 16 + +/* Amount of I/O memory used by the card */ +#define BUFFER_SIZE (512) +#define MIRROR_SIZE (BUFFER_SIZE * 4) + +static int com90xx_skip_probe __initdata = 0; + +/* Module parameters */ + +static int io; /* use the insmod io= irq= shmem= options */ +static int irq; +static int shmem; +static char device[9]; /* use eg. device=arc1 to change name */ + +module_param_hw(io, int, ioport, 0); +module_param_hw(irq, int, irq, 0); +module_param(shmem, int, 0); +module_param_string(device, device, sizeof(device), 0); + +static void __init com90xx_probe(void) +{ + int count, status, ioaddr, numprint, airq, openparen = 0; + unsigned long airqmask; + int ports[(0x3f0 - 0x200) / 16 + 1] = { 0 }; + unsigned long *shmems; + void __iomem **iomem; + int numports, numshmems, *port; + u_long *p; + int index; + + if (!io && !irq && !shmem && !*device && com90xx_skip_probe) + return; + + shmems = kzalloc(((0x100000 - 0xa0000) / 0x800) * sizeof(unsigned long), + GFP_KERNEL); + if (!shmems) + return; + iomem = kzalloc(((0x100000 - 0xa0000) / 0x800) * sizeof(void __iomem *), + GFP_KERNEL); + if (!iomem) { + kfree(shmems); + return; + } + + if (BUGLVL(D_NORMAL)) + pr_info("%s\n", "COM90xx chipset support"); + + /* set up the arrays where we'll store the possible probe addresses */ + numports = numshmems = 0; + if (io) + ports[numports++] = io; + else + for (count = 0x200; count <= 0x3f0; count += 16) + ports[numports++] = count; + if (shmem) + shmems[numshmems++] = shmem; + else + for (count = 0xA0000; count <= 0xFF800; count += 2048) + shmems[numshmems++] = count; + + /* Stage 1: abandon any reserved ports, or ones with status==0xFF + * (empty), and reset any others by reading the reset port. + */ + numprint = -1; + for (port = &ports[0]; port - ports < numports; port++) { + numprint++; + numprint %= 8; + if (!numprint) { + arc_cont(D_INIT, "\n"); + arc_cont(D_INIT, "S1: "); + } + arc_cont(D_INIT, "%Xh ", *port); + + ioaddr = *port; + + if (!request_region(*port, ARCNET_TOTAL_SIZE, + "arcnet (90xx)")) { + arc_cont(D_INIT_REASONS, "(request_region)\n"); + arc_cont(D_INIT_REASONS, "S1: "); + if (BUGLVL(D_INIT_REASONS)) + numprint = 0; + *port-- = ports[--numports]; + continue; + } + if (arcnet_inb(ioaddr, COM9026_REG_R_STATUS) == 0xFF) { + arc_cont(D_INIT_REASONS, "(empty)\n"); + arc_cont(D_INIT_REASONS, "S1: "); + if (BUGLVL(D_INIT_REASONS)) + numprint = 0; + release_region(*port, ARCNET_TOTAL_SIZE); + *port-- = ports[--numports]; + continue; + } + /* begin resetting card */ + arcnet_inb(ioaddr, COM9026_REG_R_RESET); + + arc_cont(D_INIT_REASONS, "\n"); + arc_cont(D_INIT_REASONS, "S1: "); + if (BUGLVL(D_INIT_REASONS)) + numprint = 0; + } + arc_cont(D_INIT, "\n"); + + if (!numports) { + arc_cont(D_NORMAL, "S1: No ARCnet cards found.\n"); + kfree(shmems); + kfree(iomem); + return; + } + /* Stage 2: we have now reset any possible ARCnet cards, so we can't + * do anything until they finish. If D_INIT, print the list of + * cards that are left. + */ + numprint = -1; + for (port = &ports[0]; port < ports + numports; port++) { + numprint++; + numprint %= 8; + if (!numprint) { + arc_cont(D_INIT, "\n"); + arc_cont(D_INIT, "S2: "); + } + arc_cont(D_INIT, "%Xh ", *port); + } + arc_cont(D_INIT, "\n"); + mdelay(RESETtime); + + /* Stage 3: abandon any shmem addresses that don't have the signature + * 0xD1 byte in the right place, or are read-only. + */ + numprint = -1; + for (index = 0, p = &shmems[0]; index < numshmems; p++, index++) { + void __iomem *base; + + numprint++; + numprint %= 8; + if (!numprint) { + arc_cont(D_INIT, "\n"); + arc_cont(D_INIT, "S3: "); + } + arc_cont(D_INIT, "%lXh ", *p); + + if (!request_mem_region(*p, MIRROR_SIZE, "arcnet (90xx)")) { + arc_cont(D_INIT_REASONS, "(request_mem_region)\n"); + arc_cont(D_INIT_REASONS, "Stage 3: "); + if (BUGLVL(D_INIT_REASONS)) + numprint = 0; + goto out; + } + base = ioremap(*p, MIRROR_SIZE); + if (!base) { + arc_cont(D_INIT_REASONS, "(ioremap)\n"); + arc_cont(D_INIT_REASONS, "Stage 3: "); + if (BUGLVL(D_INIT_REASONS)) + numprint = 0; + goto out1; + } + if (arcnet_readb(base, COM9026_REG_R_STATUS) != TESTvalue) { + arc_cont(D_INIT_REASONS, "(%02Xh != %02Xh)\n", + arcnet_readb(base, COM9026_REG_R_STATUS), + TESTvalue); + arc_cont(D_INIT_REASONS, "S3: "); + if (BUGLVL(D_INIT_REASONS)) + numprint = 0; + goto out2; + } + /* By writing 0x42 to the TESTvalue location, we also make + * sure no "mirror" shmem areas show up - if they occur + * in another pass through this loop, they will be discarded + * because *cptr != TESTvalue. + */ + arcnet_writeb(0x42, base, COM9026_REG_W_INTMASK); + if (arcnet_readb(base, COM9026_REG_R_STATUS) != 0x42) { + arc_cont(D_INIT_REASONS, "(read only)\n"); + arc_cont(D_INIT_REASONS, "S3: "); + goto out2; + } + arc_cont(D_INIT_REASONS, "\n"); + arc_cont(D_INIT_REASONS, "S3: "); + if (BUGLVL(D_INIT_REASONS)) + numprint = 0; + iomem[index] = base; + continue; + out2: + iounmap(base); + out1: + release_mem_region(*p, MIRROR_SIZE); + out: + *p-- = shmems[--numshmems]; + index--; + } + arc_cont(D_INIT, "\n"); + + if (!numshmems) { + arc_cont(D_NORMAL, "S3: No ARCnet cards found.\n"); + for (port = &ports[0]; port < ports + numports; port++) + release_region(*port, ARCNET_TOTAL_SIZE); + kfree(shmems); + kfree(iomem); + return; + } + /* Stage 4: something of a dummy, to report the shmems that are + * still possible after stage 3. + */ + numprint = -1; + for (p = &shmems[0]; p < shmems + numshmems; p++) { + numprint++; + numprint %= 8; + if (!numprint) { + arc_cont(D_INIT, "\n"); + arc_cont(D_INIT, "S4: "); + } + arc_cont(D_INIT, "%lXh ", *p); + } + arc_cont(D_INIT, "\n"); + + /* Stage 5: for any ports that have the correct status, can disable + * the RESET flag, and (if no irq is given) generate an autoirq, + * register an ARCnet device. + * + * Currently, we can only register one device per probe, so quit + * after the first one is found. + */ + numprint = -1; + for (port = &ports[0]; port < ports + numports; port++) { + int found = 0; + + numprint++; + numprint %= 8; + if (!numprint) { + arc_cont(D_INIT, "\n"); + arc_cont(D_INIT, "S5: "); + } + arc_cont(D_INIT, "%Xh ", *port); + + ioaddr = *port; + status = arcnet_inb(ioaddr, COM9026_REG_R_STATUS); + + if ((status & 0x9D) + != (NORXflag | RECONflag | TXFREEflag | RESETflag)) { + arc_cont(D_INIT_REASONS, "(status=%Xh)\n", status); + arc_cont(D_INIT_REASONS, "S5: "); + if (BUGLVL(D_INIT_REASONS)) + numprint = 0; + release_region(*port, ARCNET_TOTAL_SIZE); + *port-- = ports[--numports]; + continue; + } + arcnet_outb(CFLAGScmd | RESETclear | CONFIGclear, + ioaddr, COM9026_REG_W_COMMAND); + status = arcnet_inb(ioaddr, COM9026_REG_R_STATUS); + if (status & RESETflag) { + arc_cont(D_INIT_REASONS, " (eternal reset, status=%Xh)\n", + status); + arc_cont(D_INIT_REASONS, "S5: "); + if (BUGLVL(D_INIT_REASONS)) + numprint = 0; + release_region(*port, ARCNET_TOTAL_SIZE); + *port-- = ports[--numports]; + continue; + } + /* skip this completely if an IRQ was given, because maybe + * we're on a machine that locks during autoirq! + */ + if (!irq) { + /* if we do this, we're sure to get an IRQ since the + * card has just reset and the NORXflag is on until + * we tell it to start receiving. + */ + airqmask = probe_irq_on(); + arcnet_outb(NORXflag, ioaddr, COM9026_REG_W_INTMASK); + udelay(1); + arcnet_outb(0, ioaddr, COM9026_REG_W_INTMASK); + airq = probe_irq_off(airqmask); + + if (airq <= 0) { + arc_cont(D_INIT_REASONS, "(airq=%d)\n", airq); + arc_cont(D_INIT_REASONS, "S5: "); + if (BUGLVL(D_INIT_REASONS)) + numprint = 0; + release_region(*port, ARCNET_TOTAL_SIZE); + *port-- = ports[--numports]; + continue; + } + } else { + airq = irq; + } + + arc_cont(D_INIT, "(%d,", airq); + openparen = 1; + + /* Everything seems okay. But which shmem, if any, puts + * back its signature byte when the card is reset? + * + * If there are multiple cards installed, there might be + * multiple shmems still in the list. + */ +#ifdef FAST_PROBE + if (numports > 1 || numshmems > 1) { + arcnet_inb(ioaddr, COM9026_REG_R_RESET); + mdelay(RESETtime); + } else { + /* just one shmem and port, assume they match */ + arcnet_writeb(TESTvalue, iomem[0], + COM9026_REG_W_INTMASK); + } +#else + arcnet_inb(ioaddr, COM9026_REG_R_RESET); + mdelay(RESETtime); +#endif + + for (index = 0; index < numshmems; index++) { + u_long ptr = shmems[index]; + void __iomem *base = iomem[index]; + + if (arcnet_readb(base, COM9026_REG_R_STATUS) == TESTvalue) { /* found one */ + arc_cont(D_INIT, "%lXh)\n", *p); + openparen = 0; + + /* register the card */ + if (com90xx_found(*port, airq, ptr, base) == 0) + found = 1; + numprint = -1; + + /* remove shmem from the list */ + shmems[index] = shmems[--numshmems]; + iomem[index] = iomem[numshmems]; + break; /* go to the next I/O port */ + } else { + arc_cont(D_INIT_REASONS, "%Xh-", + arcnet_readb(base, COM9026_REG_R_STATUS)); + } + } + + if (openparen) { + if (BUGLVL(D_INIT)) + pr_cont("no matching shmem)\n"); + if (BUGLVL(D_INIT_REASONS)) { + pr_cont("S5: "); + numprint = 0; + } + } + if (!found) + release_region(*port, ARCNET_TOTAL_SIZE); + *port-- = ports[--numports]; + } + + if (BUGLVL(D_INIT_REASONS)) + pr_cont("\n"); + + /* Now put back TESTvalue on all leftover shmems. */ + for (index = 0; index < numshmems; index++) { + arcnet_writeb(TESTvalue, iomem[index], COM9026_REG_W_INTMASK); + iounmap(iomem[index]); + release_mem_region(shmems[index], MIRROR_SIZE); + } + kfree(shmems); + kfree(iomem); +} + +static int __init check_mirror(unsigned long addr, size_t size) +{ + void __iomem *p; + int res = -1; + + if (!request_mem_region(addr, size, "arcnet (90xx)")) + return -1; + + p = ioremap(addr, size); + if (p) { + if (arcnet_readb(p, COM9026_REG_R_STATUS) == TESTvalue) + res = 1; + else + res = 0; + iounmap(p); + } + + release_mem_region(addr, size); + return res; +} + +/* Set up the struct net_device associated with this card. Called after + * probing succeeds. + */ +static int __init com90xx_found(int ioaddr, int airq, u_long shmem, + void __iomem *p) +{ + struct net_device *dev = NULL; + struct arcnet_local *lp; + u_long first_mirror, last_mirror; + int mirror_size; + + /* allocate struct net_device */ + dev = alloc_arcdev(device); + if (!dev) { + arc_cont(D_NORMAL, "com90xx: Can't allocate device!\n"); + iounmap(p); + release_mem_region(shmem, MIRROR_SIZE); + return -ENOMEM; + } + lp = netdev_priv(dev); + /* find the real shared memory start/end points, including mirrors */ + + /* guess the actual size of one "memory mirror" - the number of + * bytes between copies of the shared memory. On most cards, it's + * 2k (or there are no mirrors at all) but on some, it's 4k. + */ + mirror_size = MIRROR_SIZE; + if (arcnet_readb(p, COM9026_REG_R_STATUS) == TESTvalue && + check_mirror(shmem - MIRROR_SIZE, MIRROR_SIZE) == 0 && + check_mirror(shmem - 2 * MIRROR_SIZE, MIRROR_SIZE) == 1) + mirror_size = 2 * MIRROR_SIZE; + + first_mirror = shmem - mirror_size; + while (check_mirror(first_mirror, mirror_size) == 1) + first_mirror -= mirror_size; + first_mirror += mirror_size; + + last_mirror = shmem + mirror_size; + while (check_mirror(last_mirror, mirror_size) == 1) + last_mirror += mirror_size; + last_mirror -= mirror_size; + + dev->mem_start = first_mirror; + dev->mem_end = last_mirror + MIRROR_SIZE - 1; + + iounmap(p); + release_mem_region(shmem, MIRROR_SIZE); + + if (!request_mem_region(dev->mem_start, + dev->mem_end - dev->mem_start + 1, + "arcnet (90xx)")) + goto err_free_dev; + + /* reserve the irq */ + if (request_irq(airq, arcnet_interrupt, 0, "arcnet (90xx)", dev)) { + arc_printk(D_NORMAL, dev, "Can't get IRQ %d!\n", airq); + goto err_release_mem; + } + dev->irq = airq; + + /* Initialize the rest of the device structure. */ + lp->card_name = "COM90xx"; + lp->hw.command = com90xx_command; + lp->hw.status = com90xx_status; + lp->hw.intmask = com90xx_setmask; + lp->hw.reset = com90xx_reset; + lp->hw.owner = THIS_MODULE; + lp->hw.copy_to_card = com90xx_copy_to_card; + lp->hw.copy_from_card = com90xx_copy_from_card; + lp->mem_start = ioremap(dev->mem_start, + dev->mem_end - dev->mem_start + 1); + if (!lp->mem_start) { + arc_printk(D_NORMAL, dev, "Can't remap device memory!\n"); + goto err_free_irq; + } + + /* get and check the station ID from offset 1 in shmem */ + arcnet_set_addr(dev, arcnet_readb(lp->mem_start, + COM9026_REG_R_STATION)); + + dev->base_addr = ioaddr; + + arc_printk(D_NORMAL, dev, "COM90xx station %02Xh found at %03lXh, IRQ %d, ShMem %lXh (%ld*%xh).\n", + dev->dev_addr[0], + dev->base_addr, dev->irq, dev->mem_start, + (dev->mem_end - dev->mem_start + 1) / mirror_size, + mirror_size); + + if (register_netdev(dev)) + goto err_unmap; + + cards[numcards++] = dev; + return 0; + +err_unmap: + iounmap(lp->mem_start); +err_free_irq: + free_irq(dev->irq, dev); +err_release_mem: + release_mem_region(dev->mem_start, dev->mem_end - dev->mem_start + 1); +err_free_dev: + free_arcdev(dev); + return -EIO; +} + +static void com90xx_command(struct net_device *dev, int cmd) +{ + short ioaddr = dev->base_addr; + + arcnet_outb(cmd, ioaddr, COM9026_REG_W_COMMAND); +} + +static int com90xx_status(struct net_device *dev) +{ + short ioaddr = dev->base_addr; + + return arcnet_inb(ioaddr, COM9026_REG_R_STATUS); +} + +static void com90xx_setmask(struct net_device *dev, int mask) +{ + short ioaddr = dev->base_addr; + + arcnet_outb(mask, ioaddr, COM9026_REG_W_INTMASK); +} + +/* Do a hardware reset on the card, and set up necessary registers. + * + * This should be called as little as possible, because it disrupts the + * token on the network (causes a RECON) and requires a significant delay. + * + * However, it does make sure the card is in a defined state. + */ +static int com90xx_reset(struct net_device *dev, int really_reset) +{ + struct arcnet_local *lp = netdev_priv(dev); + short ioaddr = dev->base_addr; + + arc_printk(D_INIT, dev, "Resetting (status=%02Xh)\n", + arcnet_inb(ioaddr, COM9026_REG_R_STATUS)); + + if (really_reset) { + /* reset the card */ + arcnet_inb(ioaddr, COM9026_REG_R_RESET); + mdelay(RESETtime); + } + /* clear flags & end reset */ + arcnet_outb(CFLAGScmd | RESETclear, ioaddr, COM9026_REG_W_COMMAND); + arcnet_outb(CFLAGScmd | CONFIGclear, ioaddr, COM9026_REG_W_COMMAND); + +#if 0 + /* don't do this until we verify that it doesn't hurt older cards! */ + arcnet_outb(arcnet_inb(ioaddr, COM9026_REG_RW_CONFIG) | ENABLE16flag, + ioaddr, COM9026_REG_RW_CONFIG); +#endif + + /* verify that the ARCnet signature byte is present */ + if (arcnet_readb(lp->mem_start, COM9026_REG_R_STATUS) != TESTvalue) { + if (really_reset) + arc_printk(D_NORMAL, dev, "reset failed: TESTvalue not present.\n"); + return 1; + } + /* enable extended (512-byte) packets */ + arcnet_outb(CONFIGcmd | EXTconf, ioaddr, COM9026_REG_W_COMMAND); + + /* clean out all the memory to make debugging make more sense :) */ + if (BUGLVL(D_DURING)) + memset_io(lp->mem_start, 0x42, 2048); + + /* done! return success. */ + return 0; +} + +static void com90xx_copy_to_card(struct net_device *dev, int bufnum, + int offset, void *buf, int count) +{ + struct arcnet_local *lp = netdev_priv(dev); + void __iomem *memaddr = lp->mem_start + bufnum * 512 + offset; + + TIME(dev, "memcpy_toio", count, memcpy_toio(memaddr, buf, count)); +} + +static void com90xx_copy_from_card(struct net_device *dev, int bufnum, + int offset, void *buf, int count) +{ + struct arcnet_local *lp = netdev_priv(dev); + void __iomem *memaddr = lp->mem_start + bufnum * 512 + offset; + + TIME(dev, "memcpy_fromio", count, memcpy_fromio(buf, memaddr, count)); +} + +MODULE_LICENSE("GPL"); + +static int __init com90xx_init(void) +{ + if (irq == 2) + irq = 9; + com90xx_probe(); + if (!numcards) + return -EIO; + return 0; +} + +static void __exit com90xx_exit(void) +{ + struct net_device *dev; + struct arcnet_local *lp; + int count; + + for (count = 0; count < numcards; count++) { + dev = cards[count]; + lp = netdev_priv(dev); + + unregister_netdev(dev); + free_irq(dev->irq, dev); + iounmap(lp->mem_start); + release_region(dev->base_addr, ARCNET_TOTAL_SIZE); + release_mem_region(dev->mem_start, + dev->mem_end - dev->mem_start + 1); + free_arcdev(dev); + } +} + +module_init(com90xx_init); +module_exit(com90xx_exit); + +#ifndef MODULE +static int __init com90xx_setup(char *s) +{ + int ints[8]; + + s = get_options(s, 8, ints); + if (!ints[0] && !*s) { + pr_notice("Disabled\n"); + return 1; + } + + switch (ints[0]) { + default: /* ERROR */ + pr_err("Too many arguments\n"); + fallthrough; + case 3: /* Mem address */ + shmem = ints[3]; + fallthrough; + case 2: /* IRQ */ + irq = ints[2]; + fallthrough; + case 1: /* IO address */ + io = ints[1]; + } + + if (*s) + snprintf(device, sizeof(device), "%s", s); + + return 1; +} + +__setup("com90xx=", com90xx_setup); +#endif diff --git a/drivers/net/arcnet/rfc1051.c b/drivers/net/arcnet/rfc1051.c new file mode 100644 index 000000000..a7752a5b6 --- /dev/null +++ b/drivers/net/arcnet/rfc1051.c @@ -0,0 +1,242 @@ +/* + * Linux ARCnet driver - RFC1051 ("simple" standard) packet encapsulation + * + * Written 1994-1999 by Avery Pennarun. + * Derived from skeleton.c by Donald Becker. + * + * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com) + * for sponsoring the further development of this driver. + * + * ********************** + * + * The original copyright of skeleton.c was as follows: + * + * skeleton.c Written 1993 by Donald Becker. + * Copyright 1993 United States Government as represented by the + * Director, National Security Agency. This software may only be used + * and distributed according to the terms of the GNU General Public License as + * modified by SRC, incorporated herein by reference. + * + * ********************** + * + * For more details, see drivers/net/arcnet.c + * + * ********************** + */ + +#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include + +#include "arcdevice.h" + +static __be16 type_trans(struct sk_buff *skb, struct net_device *dev); +static void rx(struct net_device *dev, int bufnum, + struct archdr *pkthdr, int length); +static int build_header(struct sk_buff *skb, struct net_device *dev, + unsigned short type, uint8_t daddr); +static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length, + int bufnum); + +static struct ArcProto rfc1051_proto = { + .suffix = 's', + .mtu = XMTU - RFC1051_HDR_SIZE, + .is_ip = 1, + .rx = rx, + .build_header = build_header, + .prepare_tx = prepare_tx, + .continue_tx = NULL, + .ack_tx = NULL +}; + +static int __init arcnet_rfc1051_init(void) +{ + pr_info("%s\n", "RFC1051 \"simple standard\" (`s') encapsulation support loaded"); + + arc_proto_map[ARC_P_IP_RFC1051] + = arc_proto_map[ARC_P_ARP_RFC1051] + = &rfc1051_proto; + + /* if someone else already owns the broadcast, we won't take it */ + if (arc_bcast_proto == arc_proto_default) + arc_bcast_proto = &rfc1051_proto; + + return 0; +} + +static void __exit arcnet_rfc1051_exit(void) +{ + arcnet_unregister_proto(&rfc1051_proto); +} + +module_init(arcnet_rfc1051_init); +module_exit(arcnet_rfc1051_exit); + +MODULE_LICENSE("GPL"); + +/* Determine a packet's protocol ID. + * + * With ARCnet we have to convert everything to Ethernet-style stuff. + */ +static __be16 type_trans(struct sk_buff *skb, struct net_device *dev) +{ + struct archdr *pkt = (struct archdr *)skb->data; + struct arc_rfc1051 *soft = &pkt->soft.rfc1051; + int hdr_size = ARC_HDR_SIZE + RFC1051_HDR_SIZE; + + /* Pull off the arcnet header. */ + skb_reset_mac_header(skb); + skb_pull(skb, hdr_size); + + if (pkt->hard.dest == 0) { + skb->pkt_type = PACKET_BROADCAST; + } else if (dev->flags & IFF_PROMISC) { + /* if we're not sending to ourselves :) */ + if (pkt->hard.dest != dev->dev_addr[0]) + skb->pkt_type = PACKET_OTHERHOST; + } + /* now return the protocol number */ + switch (soft->proto) { + case ARC_P_IP_RFC1051: + return htons(ETH_P_IP); + case ARC_P_ARP_RFC1051: + return htons(ETH_P_ARP); + + default: + dev->stats.rx_errors++; + dev->stats.rx_crc_errors++; + return 0; + } + + return htons(ETH_P_IP); +} + +/* packet receiver */ +static void rx(struct net_device *dev, int bufnum, + struct archdr *pkthdr, int length) +{ + struct arcnet_local *lp = netdev_priv(dev); + struct sk_buff *skb; + struct archdr *pkt = pkthdr; + int ofs; + + arc_printk(D_DURING, dev, "it's a raw packet (length=%d)\n", length); + + if (length >= MinTU) + ofs = 512 - length; + else + ofs = 256 - length; + + skb = alloc_skb(length + ARC_HDR_SIZE, GFP_ATOMIC); + if (!skb) { + dev->stats.rx_dropped++; + return; + } + skb_put(skb, length + ARC_HDR_SIZE); + skb->dev = dev; + + pkt = (struct archdr *)skb->data; + + /* up to sizeof(pkt->soft) has already been copied from the card */ + memcpy(pkt, pkthdr, sizeof(struct archdr)); + if (length > sizeof(pkt->soft)) + lp->hw.copy_from_card(dev, bufnum, ofs + sizeof(pkt->soft), + pkt->soft.raw + sizeof(pkt->soft), + length - sizeof(pkt->soft)); + + if (BUGLVL(D_SKB)) + arcnet_dump_skb(dev, skb, "rx"); + + skb->protocol = type_trans(skb, dev); + netif_rx(skb); +} + +/* Create the ARCnet hard/soft headers for RFC1051 */ +static int build_header(struct sk_buff *skb, struct net_device *dev, + unsigned short type, uint8_t daddr) +{ + int hdr_size = ARC_HDR_SIZE + RFC1051_HDR_SIZE; + struct archdr *pkt = skb_push(skb, hdr_size); + struct arc_rfc1051 *soft = &pkt->soft.rfc1051; + + /* set the protocol ID according to RFC1051 */ + switch (type) { + case ETH_P_IP: + soft->proto = ARC_P_IP_RFC1051; + break; + case ETH_P_ARP: + soft->proto = ARC_P_ARP_RFC1051; + break; + default: + arc_printk(D_NORMAL, dev, "RFC1051: I don't understand protocol %d (%Xh)\n", + type, type); + dev->stats.tx_errors++; + dev->stats.tx_aborted_errors++; + return 0; + } + + /* Set the source hardware address. + * + * This is pretty pointless for most purposes, but it can help in + * debugging. ARCnet does not allow us to change the source address + * in the actual packet sent. + */ + pkt->hard.source = *dev->dev_addr; + + /* see linux/net/ethernet/eth.c to see where I got the following */ + + if (dev->flags & (IFF_LOOPBACK | IFF_NOARP)) { + /* FIXME: fill in the last byte of the dest ipaddr here to + * better comply with RFC1051 in "noarp" mode. + */ + pkt->hard.dest = 0; + return hdr_size; + } + /* otherwise, just fill it in and go! */ + pkt->hard.dest = daddr; + + return hdr_size; /* success */ +} + +static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length, + int bufnum) +{ + struct arcnet_local *lp = netdev_priv(dev); + struct arc_hardware *hard = &pkt->hard; + int ofs; + + arc_printk(D_DURING, dev, "prepare_tx: txbufs=%d/%d/%d\n", + lp->next_tx, lp->cur_tx, bufnum); + + /* hard header is not included in packet length */ + length -= ARC_HDR_SIZE; + + if (length > XMTU) { + /* should never happen! other people already check for this. */ + arc_printk(D_NORMAL, dev, "Bug! prepare_tx with size %d (> %d)\n", + length, XMTU); + length = XMTU; + } + if (length > MinTU) { + hard->offset[0] = 0; + hard->offset[1] = ofs = 512 - length; + } else if (length > MTU) { + hard->offset[0] = 0; + hard->offset[1] = ofs = 512 - length - 3; + } else { + hard->offset[0] = ofs = 256 - length; + } + + lp->hw.copy_to_card(dev, bufnum, 0, hard, ARC_HDR_SIZE); + lp->hw.copy_to_card(dev, bufnum, ofs, &pkt->soft, length); + + lp->lastload_dest = hard->dest; + + return 1; /* done */ +} diff --git a/drivers/net/arcnet/rfc1201.c b/drivers/net/arcnet/rfc1201.c new file mode 100644 index 000000000..a4c856282 --- /dev/null +++ b/drivers/net/arcnet/rfc1201.c @@ -0,0 +1,547 @@ +/* + * Linux ARCnet driver - RFC1201 (standard) packet encapsulation + * + * Written 1994-1999 by Avery Pennarun. + * Derived from skeleton.c by Donald Becker. + * + * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com) + * for sponsoring the further development of this driver. + * + * ********************** + * + * The original copyright of skeleton.c was as follows: + * + * skeleton.c Written 1993 by Donald Becker. + * Copyright 1993 United States Government as represented by the + * Director, National Security Agency. This software may only be used + * and distributed according to the terms of the GNU General Public License as + * modified by SRC, incorporated herein by reference. + * + * ********************** + * + * For more details, see drivers/net/arcnet.c + * + * ********************** + */ + +#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include + +#include "arcdevice.h" + +MODULE_LICENSE("GPL"); + +static __be16 type_trans(struct sk_buff *skb, struct net_device *dev); +static void rx(struct net_device *dev, int bufnum, + struct archdr *pkthdr, int length); +static int build_header(struct sk_buff *skb, struct net_device *dev, + unsigned short type, uint8_t daddr); +static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length, + int bufnum); +static int continue_tx(struct net_device *dev, int bufnum); + +static struct ArcProto rfc1201_proto = { + .suffix = 'a', + .mtu = 1500, /* could be more, but some receivers can't handle it... */ + .is_ip = 1, /* This is for sending IP and ARP packages */ + .rx = rx, + .build_header = build_header, + .prepare_tx = prepare_tx, + .continue_tx = continue_tx, + .ack_tx = NULL +}; + +static int __init arcnet_rfc1201_init(void) +{ + pr_info("%s\n", "RFC1201 \"standard\" (`a') encapsulation support loaded"); + + arc_proto_map[ARC_P_IP] + = arc_proto_map[ARC_P_IPV6] + = arc_proto_map[ARC_P_ARP] + = arc_proto_map[ARC_P_RARP] + = arc_proto_map[ARC_P_IPX] + = arc_proto_map[ARC_P_NOVELL_EC] + = &rfc1201_proto; + + /* if someone else already owns the broadcast, we won't take it */ + if (arc_bcast_proto == arc_proto_default) + arc_bcast_proto = &rfc1201_proto; + + return 0; +} + +static void __exit arcnet_rfc1201_exit(void) +{ + arcnet_unregister_proto(&rfc1201_proto); +} + +module_init(arcnet_rfc1201_init); +module_exit(arcnet_rfc1201_exit); + +/* Determine a packet's protocol ID. + * + * With ARCnet we have to convert everything to Ethernet-style stuff. + */ +static __be16 type_trans(struct sk_buff *skb, struct net_device *dev) +{ + struct archdr *pkt = (struct archdr *)skb->data; + struct arc_rfc1201 *soft = &pkt->soft.rfc1201; + int hdr_size = ARC_HDR_SIZE + RFC1201_HDR_SIZE; + + /* Pull off the arcnet header. */ + skb_reset_mac_header(skb); + skb_pull(skb, hdr_size); + + if (pkt->hard.dest == 0) { + skb->pkt_type = PACKET_BROADCAST; + } else if (dev->flags & IFF_PROMISC) { + /* if we're not sending to ourselves :) */ + if (pkt->hard.dest != dev->dev_addr[0]) + skb->pkt_type = PACKET_OTHERHOST; + } + /* now return the protocol number */ + switch (soft->proto) { + case ARC_P_IP: + return htons(ETH_P_IP); + case ARC_P_IPV6: + return htons(ETH_P_IPV6); + case ARC_P_ARP: + return htons(ETH_P_ARP); + case ARC_P_RARP: + return htons(ETH_P_RARP); + + case ARC_P_IPX: + case ARC_P_NOVELL_EC: + return htons(ETH_P_802_3); + default: + dev->stats.rx_errors++; + dev->stats.rx_crc_errors++; + return 0; + } + + return htons(ETH_P_IP); +} + +/* packet receiver */ +static void rx(struct net_device *dev, int bufnum, + struct archdr *pkthdr, int length) +{ + struct arcnet_local *lp = netdev_priv(dev); + struct sk_buff *skb; + struct archdr *pkt = pkthdr; + struct arc_rfc1201 *soft = &pkthdr->soft.rfc1201; + int saddr = pkt->hard.source, ofs; + struct Incoming *in = &lp->rfc1201.incoming[saddr]; + + arc_printk(D_DURING, dev, "it's an RFC1201 packet (length=%d)\n", + length); + + if (length >= MinTU) + ofs = 512 - length; + else + ofs = 256 - length; + + if (soft->split_flag == 0xFF) { /* Exception Packet */ + if (length >= 4 + RFC1201_HDR_SIZE) { + arc_printk(D_DURING, dev, "compensating for exception packet\n"); + } else { + arc_printk(D_EXTRA, dev, "short RFC1201 exception packet from %02Xh", + saddr); + return; + } + + /* skip over 4-byte junkola */ + length -= 4; + ofs += 4; + lp->hw.copy_from_card(dev, bufnum, 512 - length, + soft, sizeof(pkt->soft)); + } + if (!soft->split_flag) { /* not split */ + arc_printk(D_RX, dev, "incoming is not split (splitflag=%d)\n", + soft->split_flag); + + if (in->skb) { /* already assembling one! */ + arc_printk(D_EXTRA, dev, "aborting assembly (seq=%d) for unsplit packet (splitflag=%d, seq=%d)\n", + in->sequence, soft->split_flag, + soft->sequence); + lp->rfc1201.aborted_seq = soft->sequence; + dev_kfree_skb_irq(in->skb); + dev->stats.rx_errors++; + dev->stats.rx_missed_errors++; + in->skb = NULL; + } + in->sequence = soft->sequence; + + skb = alloc_skb(length + ARC_HDR_SIZE, GFP_ATOMIC); + if (!skb) { + dev->stats.rx_dropped++; + return; + } + skb_put(skb, length + ARC_HDR_SIZE); + skb->dev = dev; + + pkt = (struct archdr *)skb->data; + soft = &pkt->soft.rfc1201; + + /* up to sizeof(pkt->soft) has already + * been copied from the card + */ + memcpy(pkt, pkthdr, sizeof(struct archdr)); + if (length > sizeof(pkt->soft)) + lp->hw.copy_from_card(dev, bufnum, + ofs + sizeof(pkt->soft), + pkt->soft.raw + sizeof(pkt->soft), + length - sizeof(pkt->soft)); + + /* ARP packets have problems when sent from some DOS systems: + * the source address is always 0! + * So we take the hardware source addr (which is impossible + * to fumble) and insert it ourselves. + */ + if (soft->proto == ARC_P_ARP) { + struct arphdr *arp = (struct arphdr *)soft->payload; + + /* make sure addresses are the right length */ + if (arp->ar_hln == 1 && arp->ar_pln == 4) { + uint8_t *cptr = (uint8_t *)arp + sizeof(struct arphdr); + + if (!*cptr) { /* is saddr = 00? */ + arc_printk(D_EXTRA, dev, + "ARP source address was 00h, set to %02Xh\n", + saddr); + dev->stats.rx_crc_errors++; + *cptr = saddr; + } else { + arc_printk(D_DURING, dev, "ARP source address (%Xh) is fine.\n", + *cptr); + } + } else { + arc_printk(D_NORMAL, dev, "funny-shaped ARP packet. (%Xh, %Xh)\n", + arp->ar_hln, arp->ar_pln); + dev->stats.rx_errors++; + dev->stats.rx_crc_errors++; + } + } + if (BUGLVL(D_SKB)) + arcnet_dump_skb(dev, skb, "rx"); + + skb->protocol = type_trans(skb, dev); + netif_rx(skb); + } else { /* split packet */ + /* NOTE: MSDOS ARP packet correction should only need to + * apply to unsplit packets, since ARP packets are so short. + * + * My interpretation of the RFC1201 document is that if a + * packet is received out of order, the entire assembly + * process should be aborted. + * + * The RFC also mentions "it is possible for successfully + * received packets to be retransmitted." As of 0.40 all + * previously received packets are allowed, not just the + * most recent one. + * + * We allow multiple assembly processes, one for each + * ARCnet card possible on the network. + * Seems rather like a waste of memory, but there's no + * other way to be reliable. + */ + + arc_printk(D_RX, dev, "packet is split (splitflag=%d, seq=%d)\n", + soft->split_flag, in->sequence); + + if (in->skb && in->sequence != soft->sequence) { + arc_printk(D_EXTRA, dev, "wrong seq number (saddr=%d, expected=%d, seq=%d, splitflag=%d)\n", + saddr, in->sequence, soft->sequence, + soft->split_flag); + dev_kfree_skb_irq(in->skb); + in->skb = NULL; + dev->stats.rx_errors++; + dev->stats.rx_missed_errors++; + in->lastpacket = in->numpackets = 0; + } + if (soft->split_flag & 1) { /* first packet in split */ + arc_printk(D_RX, dev, "brand new splitpacket (splitflag=%d)\n", + soft->split_flag); + if (in->skb) { /* already assembling one! */ + arc_printk(D_EXTRA, dev, "aborting previous (seq=%d) assembly (splitflag=%d, seq=%d)\n", + in->sequence, soft->split_flag, + soft->sequence); + dev->stats.rx_errors++; + dev->stats.rx_missed_errors++; + dev_kfree_skb_irq(in->skb); + } + in->sequence = soft->sequence; + in->numpackets = ((unsigned)soft->split_flag >> 1) + 2; + in->lastpacket = 1; + + if (in->numpackets > 16) { + arc_printk(D_EXTRA, dev, "incoming packet more than 16 segments; dropping. (splitflag=%d)\n", + soft->split_flag); + lp->rfc1201.aborted_seq = soft->sequence; + dev->stats.rx_errors++; + dev->stats.rx_length_errors++; + return; + } + in->skb = skb = alloc_skb(508 * in->numpackets + ARC_HDR_SIZE, + GFP_ATOMIC); + if (!skb) { + arc_printk(D_NORMAL, dev, "(split) memory squeeze, dropping packet.\n"); + lp->rfc1201.aborted_seq = soft->sequence; + dev->stats.rx_dropped++; + return; + } + skb->dev = dev; + pkt = (struct archdr *)skb->data; + soft = &pkt->soft.rfc1201; + + memcpy(pkt, pkthdr, ARC_HDR_SIZE + RFC1201_HDR_SIZE); + skb_put(skb, ARC_HDR_SIZE + RFC1201_HDR_SIZE); + + soft->split_flag = 0; /* end result won't be split */ + } else { /* not first packet */ + int packetnum = ((unsigned)soft->split_flag >> 1) + 1; + + /* if we're not assembling, there's no point trying to + * continue. + */ + if (!in->skb) { + if (lp->rfc1201.aborted_seq != soft->sequence) { + arc_printk(D_EXTRA, dev, "can't continue split without starting first! (splitflag=%d, seq=%d, aborted=%d)\n", + soft->split_flag, + soft->sequence, + lp->rfc1201.aborted_seq); + dev->stats.rx_errors++; + dev->stats.rx_missed_errors++; + } + return; + } + in->lastpacket++; + /* if not the right flag */ + if (packetnum != in->lastpacket) { + /* harmless duplicate? ignore. */ + if (packetnum <= in->lastpacket - 1) { + arc_printk(D_EXTRA, dev, "duplicate splitpacket ignored! (splitflag=%d)\n", + soft->split_flag); + dev->stats.rx_errors++; + dev->stats.rx_frame_errors++; + return; + } + /* "bad" duplicate, kill reassembly */ + arc_printk(D_EXTRA, dev, "out-of-order splitpacket, reassembly (seq=%d) aborted (splitflag=%d, seq=%d)\n", + in->sequence, soft->split_flag, + soft->sequence); + lp->rfc1201.aborted_seq = soft->sequence; + dev_kfree_skb_irq(in->skb); + in->skb = NULL; + dev->stats.rx_errors++; + dev->stats.rx_missed_errors++; + in->lastpacket = in->numpackets = 0; + return; + } + pkt = (struct archdr *)in->skb->data; + soft = &pkt->soft.rfc1201; + } + + skb = in->skb; + + lp->hw.copy_from_card(dev, bufnum, ofs + RFC1201_HDR_SIZE, + skb->data + skb->len, + length - RFC1201_HDR_SIZE); + skb_put(skb, length - RFC1201_HDR_SIZE); + + /* are we done? */ + if (in->lastpacket == in->numpackets) { + in->skb = NULL; + in->lastpacket = in->numpackets = 0; + + arc_printk(D_SKB_SIZE, dev, "skb: received %d bytes from %02X (unsplit)\n", + skb->len, pkt->hard.source); + arc_printk(D_SKB_SIZE, dev, "skb: received %d bytes from %02X (split)\n", + skb->len, pkt->hard.source); + if (BUGLVL(D_SKB)) + arcnet_dump_skb(dev, skb, "rx"); + + skb->protocol = type_trans(skb, dev); + netif_rx(skb); + } + } +} + +/* Create the ARCnet hard/soft headers for RFC1201. */ +static int build_header(struct sk_buff *skb, struct net_device *dev, + unsigned short type, uint8_t daddr) +{ + struct arcnet_local *lp = netdev_priv(dev); + int hdr_size = ARC_HDR_SIZE + RFC1201_HDR_SIZE; + struct archdr *pkt = skb_push(skb, hdr_size); + struct arc_rfc1201 *soft = &pkt->soft.rfc1201; + + /* set the protocol ID according to RFC1201 */ + switch (type) { + case ETH_P_IP: + soft->proto = ARC_P_IP; + break; + case ETH_P_IPV6: + soft->proto = ARC_P_IPV6; + break; + case ETH_P_ARP: + soft->proto = ARC_P_ARP; + break; + case ETH_P_RARP: + soft->proto = ARC_P_RARP; + break; + case ETH_P_IPX: + case ETH_P_802_3: + case ETH_P_802_2: + soft->proto = ARC_P_IPX; + break; + case ETH_P_ATALK: + soft->proto = ARC_P_ATALK; + break; + default: + arc_printk(D_NORMAL, dev, "RFC1201: I don't understand protocol %d (%Xh)\n", + type, type); + dev->stats.tx_errors++; + dev->stats.tx_aborted_errors++; + return 0; + } + + /* Set the source hardware address. + * + * This is pretty pointless for most purposes, but it can help in + * debugging. ARCnet does not allow us to change the source address + * in the actual packet sent. + */ + pkt->hard.source = *dev->dev_addr; + + soft->sequence = htons(lp->rfc1201.sequence++); + soft->split_flag = 0; /* split packets are done elsewhere */ + + /* see linux/net/ethernet/eth.c to see where I got the following */ + + if (dev->flags & (IFF_LOOPBACK | IFF_NOARP)) { + /* FIXME: fill in the last byte of the dest ipaddr here + * to better comply with RFC1051 in "noarp" mode. + * For now, always broadcasting will probably at least get + * packets sent out :) + */ + pkt->hard.dest = 0; + return hdr_size; + } + /* otherwise, drop in the dest address */ + pkt->hard.dest = daddr; + return hdr_size; +} + +static void load_pkt(struct net_device *dev, struct arc_hardware *hard, + struct arc_rfc1201 *soft, int softlen, int bufnum) +{ + struct arcnet_local *lp = netdev_priv(dev); + int ofs; + + /* assume length <= XMTU: someone should have handled that by now. */ + + if (softlen > MinTU) { + hard->offset[0] = 0; + hard->offset[1] = ofs = 512 - softlen; + } else if (softlen > MTU) { /* exception packet - add an extra header */ + struct arc_rfc1201 excsoft; + + excsoft.proto = soft->proto; + excsoft.split_flag = 0xff; + excsoft.sequence = htons(0xffff); + + hard->offset[0] = 0; + ofs = 512 - softlen; + hard->offset[1] = ofs - RFC1201_HDR_SIZE; + lp->hw.copy_to_card(dev, bufnum, ofs - RFC1201_HDR_SIZE, + &excsoft, RFC1201_HDR_SIZE); + } else { + hard->offset[0] = ofs = 256 - softlen; + } + + lp->hw.copy_to_card(dev, bufnum, 0, hard, ARC_HDR_SIZE); + lp->hw.copy_to_card(dev, bufnum, ofs, soft, softlen); + + lp->lastload_dest = hard->dest; +} + +static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length, + int bufnum) +{ + struct arcnet_local *lp = netdev_priv(dev); + const int maxsegsize = XMTU - RFC1201_HDR_SIZE; + struct Outgoing *out; + + arc_printk(D_DURING, dev, "prepare_tx: txbufs=%d/%d/%d\n", + lp->next_tx, lp->cur_tx, bufnum); + + /* hard header is not included in packet length */ + length -= ARC_HDR_SIZE; + pkt->soft.rfc1201.split_flag = 0; + + /* need to do a split packet? */ + if (length > XMTU) { + out = &lp->outgoing; + + out->length = length - RFC1201_HDR_SIZE; + out->dataleft = lp->outgoing.length; + out->numsegs = (out->dataleft + maxsegsize - 1) / maxsegsize; + out->segnum = 0; + + arc_printk(D_DURING, dev, "rfc1201 prep_tx: ready for %d-segment split (%d bytes, seq=%d)\n", + out->numsegs, out->length, + pkt->soft.rfc1201.sequence); + + return 0; /* not done */ + } + /* just load the packet into the buffers and send it off */ + load_pkt(dev, &pkt->hard, &pkt->soft.rfc1201, length, bufnum); + + return 1; /* done */ +} + +static int continue_tx(struct net_device *dev, int bufnum) +{ + struct arcnet_local *lp = netdev_priv(dev); + struct Outgoing *out = &lp->outgoing; + struct arc_hardware *hard = &out->pkt->hard; + struct arc_rfc1201 *soft = &out->pkt->soft.rfc1201, *newsoft; + int maxsegsize = XMTU - RFC1201_HDR_SIZE; + int seglen; + + arc_printk(D_DURING, dev, + "rfc1201 continue_tx: loading segment %d(+1) of %d (seq=%d)\n", + out->segnum, out->numsegs, soft->sequence); + + /* the "new" soft header comes right before the data chunk */ + newsoft = (struct arc_rfc1201 *) + (out->pkt->soft.raw + out->length - out->dataleft); + + if (!out->segnum) /* first packet; newsoft == soft */ + newsoft->split_flag = ((out->numsegs - 2) << 1) | 1; + else { + newsoft->split_flag = out->segnum << 1; + newsoft->proto = soft->proto; + newsoft->sequence = soft->sequence; + } + + seglen = maxsegsize; + if (seglen > out->dataleft) + seglen = out->dataleft; + out->dataleft -= seglen; + + load_pkt(dev, hard, newsoft, seglen + RFC1201_HDR_SIZE, bufnum); + + out->segnum++; + if (out->segnum >= out->numsegs) + return 1; + else + return 0; +} -- cgit v1.2.3