From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- drivers/net/can/sja1000/Kconfig | 116 +++++ drivers/net/can/sja1000/Makefile | 16 + drivers/net/can/sja1000/ems_pci.c | 431 ++++++++++++++++ drivers/net/can/sja1000/ems_pcmcia.c | 316 ++++++++++++ drivers/net/can/sja1000/f81601.c | 211 ++++++++ drivers/net/can/sja1000/kvaser_pci.c | 384 ++++++++++++++ drivers/net/can/sja1000/peak_pci.c | 781 +++++++++++++++++++++++++++++ drivers/net/can/sja1000/peak_pcmcia.c | 733 +++++++++++++++++++++++++++ drivers/net/can/sja1000/plx_pci.c | 756 ++++++++++++++++++++++++++++ drivers/net/can/sja1000/sja1000.c | 733 +++++++++++++++++++++++++++ drivers/net/can/sja1000/sja1000.h | 184 +++++++ drivers/net/can/sja1000/sja1000_isa.c | 312 ++++++++++++ drivers/net/can/sja1000/sja1000_platform.c | 339 +++++++++++++ drivers/net/can/sja1000/tscan1.c | 191 +++++++ 14 files changed, 5503 insertions(+) create mode 100644 drivers/net/can/sja1000/Kconfig create mode 100644 drivers/net/can/sja1000/Makefile create mode 100644 drivers/net/can/sja1000/ems_pci.c create mode 100644 drivers/net/can/sja1000/ems_pcmcia.c create mode 100644 drivers/net/can/sja1000/f81601.c create mode 100644 drivers/net/can/sja1000/kvaser_pci.c create mode 100644 drivers/net/can/sja1000/peak_pci.c create mode 100644 drivers/net/can/sja1000/peak_pcmcia.c create mode 100644 drivers/net/can/sja1000/plx_pci.c create mode 100644 drivers/net/can/sja1000/sja1000.c create mode 100644 drivers/net/can/sja1000/sja1000.h create mode 100644 drivers/net/can/sja1000/sja1000_isa.c create mode 100644 drivers/net/can/sja1000/sja1000_platform.c create mode 100644 drivers/net/can/sja1000/tscan1.c (limited to 'drivers/net/can/sja1000') diff --git a/drivers/net/can/sja1000/Kconfig b/drivers/net/can/sja1000/Kconfig new file mode 100644 index 0000000000..4b2f9cb17f --- /dev/null +++ b/drivers/net/can/sja1000/Kconfig @@ -0,0 +1,116 @@ +# SPDX-License-Identifier: GPL-2.0-only + +menuconfig CAN_SJA1000 + tristate "Philips/NXP SJA1000 devices" + depends on HAS_IOMEM + +if CAN_SJA1000 + +config CAN_EMS_PCI + tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card" + depends on PCI + help + This driver is for the one, two or four channel CPC-PCI, + CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche + (http://www.ems-wuensche.de). + +config CAN_EMS_PCMCIA + tristate "EMS CPC-CARD Card" + depends on PCMCIA + help + This driver is for the one or two channel CPC-CARD cards from + EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de). + +config CAN_F81601 + tristate "Fintek F81601 PCIE to 2 CAN Controller" + depends on PCI + help + This driver adds support for Fintek F81601 PCIE to 2 CAN + Controller. It had internal 24MHz clock source, but it can + be changed by manufacturer. Use modinfo to get usage for + parameters. Visit http://www.fintek.com.tw to get more + information. + +config CAN_KVASER_PCI + tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards" + depends on PCI + help + This driver is for the PCIcanx and PCIcan cards (1, 2 or + 4 channel) from Kvaser (http://www.kvaser.com). + +config CAN_PEAK_PCI + tristate "PEAK PCAN-PCI/PCIe/miniPCI Cards" + depends on PCI + help + This driver is for the PCAN-PCI/PCIe/miniPCI cards + (1, 2, 3 or 4 channels) from PEAK-System Technik + (http://www.peak-system.com). + +config CAN_PEAK_PCIEC + bool "PEAK PCAN-ExpressCard Cards" + depends on CAN_PEAK_PCI + select I2C + select I2C_ALGOBIT + default y + help + Say Y here if you want to use a PCAN-ExpressCard from PEAK-System + Technik. This will also automatically select I2C and I2C_ALGO + configuration options. + +config CAN_PEAK_PCMCIA + tristate "PEAK PCAN-PC Card" + depends on PCMCIA + depends on HAS_IOPORT_MAP + help + This driver is for the PCAN-PC Card PCMCIA adapter (1 or 2 channels) + from PEAK-System (http://www.peak-system.com). To compile this + driver as a module, choose M here: the module will be called + peak_pcmcia. + +config CAN_PLX_PCI + tristate "PLX90xx PCI-bridge based Cards" + depends on PCI + help + This driver is for CAN interface cards based on + the PLX90xx PCI bridge. + Driver supports now: + - Adlink PCI-7841/cPCI-7841 card (http://www.adlinktech.com/) + - Adlink PCI-7841/cPCI-7841 SE card + - esd CAN-PCI/CPCI/PCI104/200 (http://www.esd.eu/) + - esd CAN-PCI/PMC/266 + - esd CAN-PCIe/2000 + - Marathon CAN-bus-PCI card (http://www.marathon.ru/) + - TEWS TECHNOLOGIES TPMC810 card (http://www.tews.com/) + - IXXAT Automation PC-I 04/PCI card (http://www.ixxat.com/) + - Connect Tech Inc. CANpro/104-Plus Opto (CRG001) card (http://www.connecttech.com) + - ASEM CAN raw - 2 isolated CAN channels (www.asem.it) + +config CAN_SJA1000_ISA + tristate "ISA Bus based legacy SJA1000 driver" + help + This driver adds legacy support for SJA1000 chips connected to + the ISA bus using I/O port, memory mapped or indirect access. + +config CAN_SJA1000_PLATFORM + tristate "Generic Platform Bus based SJA1000 driver" + help + This driver adds support for the SJA1000 chips connected to + the "platform bus" (Linux abstraction for directly to the + processor attached devices). Which can be found on various + boards from Phytec (http://www.phytec.de) like the PCM027, + PCM038. It also provides the OpenFirmware "platform bus" found + on embedded systems with OpenFirmware bindings, e.g. if you + have a PowerPC based system you may want to enable this option. + +config CAN_TSCAN1 + tristate "TS-CAN1 PC104 boards" + depends on ISA + help + This driver is for Technologic Systems' TSCAN-1 PC104 boards. + https://www.embeddedts.com/products/TS-CAN1 + The driver supports multiple boards and automatically configures them: + PLD IO base addresses are read from jumpers JP1 and JP2, + IRQ numbers are read from jumpers JP4 and JP5, + SJA1000 IO base addresses are chosen heuristically (first that works). + +endif diff --git a/drivers/net/can/sja1000/Makefile b/drivers/net/can/sja1000/Makefile new file mode 100644 index 0000000000..500ce1ddda --- /dev/null +++ b/drivers/net/can/sja1000/Makefile @@ -0,0 +1,16 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for the SJA1000 CAN controller drivers. +# + +obj-$(CONFIG_CAN_EMS_PCI) += ems_pci.o +obj-$(CONFIG_CAN_EMS_PCMCIA) += ems_pcmcia.o +obj-$(CONFIG_CAN_F81601) += f81601.o +obj-$(CONFIG_CAN_KVASER_PCI) += kvaser_pci.o +obj-$(CONFIG_CAN_PEAK_PCI) += peak_pci.o +obj-$(CONFIG_CAN_PEAK_PCMCIA) += peak_pcmcia.o +obj-$(CONFIG_CAN_PLX_PCI) += plx_pci.o +obj-$(CONFIG_CAN_SJA1000) += sja1000.o +obj-$(CONFIG_CAN_SJA1000_ISA) += sja1000_isa.o +obj-$(CONFIG_CAN_SJA1000_PLATFORM) += sja1000_platform.o +obj-$(CONFIG_CAN_TSCAN1) += tscan1.o diff --git a/drivers/net/can/sja1000/ems_pci.c b/drivers/net/can/sja1000/ems_pci.c new file mode 100644 index 0000000000..5bca719d61 --- /dev/null +++ b/drivers/net/can/sja1000/ems_pci.c @@ -0,0 +1,431 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2007 Wolfgang Grandegger + * Copyright (C) 2008 Markus Plessing + * Copyright (C) 2008 Sebastian Haas + * Copyright (C) 2023 EMS Dr. Thomas Wuensche + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "sja1000.h" + +#define DRV_NAME "ems_pci" + +MODULE_AUTHOR("Sebastian Haas "); +MODULE_AUTHOR("Gerhard Uttenthaler "); +MODULE_DESCRIPTION("Socket-CAN driver for EMS CPC-PCI/PCIe/104P CAN cards"); +MODULE_LICENSE("GPL v2"); + +#define EMS_PCI_V1_MAX_CHAN 2 +#define EMS_PCI_V2_MAX_CHAN 4 +#define EMS_PCI_V3_MAX_CHAN 4 +#define EMS_PCI_MAX_CHAN EMS_PCI_V2_MAX_CHAN + +struct ems_pci_card { + int version; + int channels; + + struct pci_dev *pci_dev; + struct net_device *net_dev[EMS_PCI_MAX_CHAN]; + + void __iomem *conf_addr; + void __iomem *base_addr; +}; + +#define EMS_PCI_CAN_CLOCK (16000000 / 2) + +/* Register definitions and descriptions are from LinCAN 0.3.3. + * + * PSB4610 PITA-2 bridge control registers + */ +#define PITA2_ICR 0x00 /* Interrupt Control Register */ +#define PITA2_ICR_INT0 0x00000002 /* [RC] INT0 Active/Clear */ +#define PITA2_ICR_INT0_EN 0x00020000 /* [RW] Enable INT0 */ + +#define PITA2_MISC 0x1c /* Miscellaneous Register */ +#define PITA2_MISC_CONFIG 0x04000000 /* Multiplexed parallel interface */ + +/* Register definitions for the PLX 9030 + */ +#define PLX_ICSR 0x4c /* Interrupt Control/Status register */ +#define PLX_ICSR_LINTI1_ENA 0x0001 /* LINTi1 Enable */ +#define PLX_ICSR_PCIINT_ENA 0x0040 /* PCI Interrupt Enable */ +#define PLX_ICSR_LINTI1_CLR 0x0400 /* Local Edge Triggerable Interrupt Clear */ +#define PLX_ICSR_ENA_CLR (PLX_ICSR_LINTI1_ENA | PLX_ICSR_PCIINT_ENA | \ + PLX_ICSR_LINTI1_CLR) + +/* Register definitions for the ASIX99100 + */ +#define ASIX_LINTSR 0x28 /* Interrupt Control/Status register */ +#define ASIX_LINTSR_INT0AC BIT(0) /* Writing 1 enables or clears interrupt */ + +#define ASIX_LIEMR 0x24 /* Local Interrupt Enable / Miscellaneous Register */ +#define ASIX_LIEMR_L0EINTEN BIT(16) /* Local INT0 input assertion enable */ +#define ASIX_LIEMR_LRST BIT(14) /* Local Reset assert */ + +/* The board configuration is probably following: + * RX1 is connected to ground. + * TX1 is not connected. + * CLKO is not connected. + * Setting the OCR register to 0xDA is a good idea. + * This means normal output mode, push-pull and the correct polarity. + */ +#define EMS_PCI_OCR (OCR_TX0_PUSHPULL | OCR_TX1_PUSHPULL) + +/* In the CDR register, you should set CBP to 1. + * You will probably also want to set the clock divider value to 7 + * (meaning direct oscillator output) because the second SJA1000 chip + * is driven by the first one CLKOUT output. + */ +#define EMS_PCI_CDR (CDR_CBP | CDR_CLKOUT_MASK) + +#define EMS_PCI_V1_BASE_BAR 1 +#define EMS_PCI_V1_CONF_BAR 0 +#define EMS_PCI_V1_CONF_SIZE 4096 /* size of PITA control area */ +#define EMS_PCI_V1_CAN_BASE_OFFSET 0x400 /* offset where the controllers start */ +#define EMS_PCI_V1_CAN_CTRL_SIZE 0x200 /* memory size for each controller */ + +#define EMS_PCI_V2_BASE_BAR 2 +#define EMS_PCI_V2_CONF_BAR 0 +#define EMS_PCI_V2_CONF_SIZE 128 /* size of PLX control area */ +#define EMS_PCI_V2_CAN_BASE_OFFSET 0x400 /* offset where the controllers start */ +#define EMS_PCI_V2_CAN_CTRL_SIZE 0x200 /* memory size for each controller */ + +#define EMS_PCI_V3_BASE_BAR 0 +#define EMS_PCI_V3_CONF_BAR 5 +#define EMS_PCI_V3_CONF_SIZE 128 /* size of ASIX control area */ +#define EMS_PCI_V3_CAN_BASE_OFFSET 0x00 /* offset where the controllers starts */ +#define EMS_PCI_V3_CAN_CTRL_SIZE 0x100 /* memory size for each controller */ + +#define EMS_PCI_BASE_SIZE 4096 /* size of controller area */ + +#define PCI_SUBDEVICE_ID_EMS 0x4010 + +static const struct pci_device_id ems_pci_tbl[] = { + /* CPC-PCI v1 */ + {PCI_VENDOR_ID_SIEMENS, 0x2104, PCI_ANY_ID, PCI_ANY_ID,}, + /* CPC-PCI v2 */ + {PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, PCI_VENDOR_ID_PLX, 0x4000}, + /* CPC-104P v2 */ + {PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, PCI_VENDOR_ID_PLX, 0x4002}, + /* CPC-PCIe v3 */ + {PCI_VENDOR_ID_ASIX, PCI_DEVICE_ID_ASIX_AX99100_LB, 0xa000, PCI_SUBDEVICE_ID_EMS}, + {0,} +}; +MODULE_DEVICE_TABLE(pci, ems_pci_tbl); + +/* Helper to read internal registers from card logic (not CAN) + */ +static u8 ems_pci_v1_readb(struct ems_pci_card *card, unsigned int port) +{ + return readb(card->base_addr + (port * 4)); +} + +static u8 ems_pci_v1_read_reg(const struct sja1000_priv *priv, int port) +{ + return readb(priv->reg_base + (port * 4)); +} + +static void ems_pci_v1_write_reg(const struct sja1000_priv *priv, + int port, u8 val) +{ + writeb(val, priv->reg_base + (port * 4)); +} + +static void ems_pci_v1_post_irq(const struct sja1000_priv *priv) +{ + struct ems_pci_card *card = priv->priv; + + /* reset int flag of pita */ + writel(PITA2_ICR_INT0_EN | PITA2_ICR_INT0, + card->conf_addr + PITA2_ICR); +} + +static u8 ems_pci_v2_read_reg(const struct sja1000_priv *priv, int port) +{ + return readb(priv->reg_base + port); +} + +static void ems_pci_v2_write_reg(const struct sja1000_priv *priv, + int port, u8 val) +{ + writeb(val, priv->reg_base + port); +} + +static void ems_pci_v2_post_irq(const struct sja1000_priv *priv) +{ + struct ems_pci_card *card = priv->priv; + + writel(PLX_ICSR_ENA_CLR, card->conf_addr + PLX_ICSR); +} + +static u8 ems_pci_v3_read_reg(const struct sja1000_priv *priv, int port) +{ + return readb(priv->reg_base + port); +} + +static void ems_pci_v3_write_reg(const struct sja1000_priv *priv, + int port, u8 val) +{ + writeb(val, priv->reg_base + port); +} + +static void ems_pci_v3_post_irq(const struct sja1000_priv *priv) +{ + struct ems_pci_card *card = priv->priv; + + writel(ASIX_LINTSR_INT0AC, card->conf_addr + ASIX_LINTSR); +} + +/* Check if a CAN controller is present at the specified location + * by trying to set 'em into the PeliCAN mode + */ +static inline int ems_pci_check_chan(const struct sja1000_priv *priv) +{ + unsigned char res; + + /* Make sure SJA1000 is in reset mode */ + priv->write_reg(priv, SJA1000_MOD, 1); + + priv->write_reg(priv, SJA1000_CDR, CDR_PELICAN); + + /* read reset-values */ + res = priv->read_reg(priv, SJA1000_CDR); + + if (res == CDR_PELICAN) + return 1; + + return 0; +} + +static void ems_pci_del_card(struct pci_dev *pdev) +{ + struct ems_pci_card *card = pci_get_drvdata(pdev); + struct net_device *dev; + int i = 0; + + for (i = 0; i < card->channels; i++) { + dev = card->net_dev[i]; + + if (!dev) + continue; + + dev_info(&pdev->dev, "Removing %s.\n", dev->name); + unregister_sja1000dev(dev); + free_sja1000dev(dev); + } + + if (card->base_addr) + pci_iounmap(card->pci_dev, card->base_addr); + + if (card->conf_addr) + pci_iounmap(card->pci_dev, card->conf_addr); + + kfree(card); + + pci_disable_device(pdev); +} + +static void ems_pci_card_reset(struct ems_pci_card *card) +{ + /* Request board reset */ + writeb(0, card->base_addr); +} + +/* Probe PCI device for EMS CAN signature and register each available + * CAN channel to SJA1000 Socket-CAN subsystem. + */ +static int ems_pci_add_card(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct sja1000_priv *priv; + struct net_device *dev; + struct ems_pci_card *card; + int max_chan, conf_size, base_bar, conf_bar; + int err, i; + + /* Enabling PCI device */ + if (pci_enable_device(pdev) < 0) { + dev_err(&pdev->dev, "Enabling PCI device failed\n"); + return -ENODEV; + } + + /* Allocating card structures to hold addresses, ... */ + card = kzalloc(sizeof(*card), GFP_KERNEL); + if (!card) { + pci_disable_device(pdev); + return -ENOMEM; + } + + pci_set_drvdata(pdev, card); + + card->pci_dev = pdev; + + card->channels = 0; + + if (pdev->vendor == PCI_VENDOR_ID_ASIX) { + card->version = 3; /* CPC-PCI v3 */ + max_chan = EMS_PCI_V3_MAX_CHAN; + base_bar = EMS_PCI_V3_BASE_BAR; + conf_bar = EMS_PCI_V3_CONF_BAR; + conf_size = EMS_PCI_V3_CONF_SIZE; + } else if (pdev->vendor == PCI_VENDOR_ID_PLX) { + card->version = 2; /* CPC-PCI v2 */ + max_chan = EMS_PCI_V2_MAX_CHAN; + base_bar = EMS_PCI_V2_BASE_BAR; + conf_bar = EMS_PCI_V2_CONF_BAR; + conf_size = EMS_PCI_V2_CONF_SIZE; + } else { + card->version = 1; /* CPC-PCI v1 */ + max_chan = EMS_PCI_V1_MAX_CHAN; + base_bar = EMS_PCI_V1_BASE_BAR; + conf_bar = EMS_PCI_V1_CONF_BAR; + conf_size = EMS_PCI_V1_CONF_SIZE; + } + + /* Remap configuration space and controller memory area */ + card->conf_addr = pci_iomap(pdev, conf_bar, conf_size); + if (!card->conf_addr) { + err = -ENOMEM; + goto failure_cleanup; + } + + card->base_addr = pci_iomap(pdev, base_bar, EMS_PCI_BASE_SIZE); + if (!card->base_addr) { + err = -ENOMEM; + goto failure_cleanup; + } + + if (card->version == 1) { + /* Configure PITA-2 parallel interface (enable MUX) */ + writel(PITA2_MISC_CONFIG, card->conf_addr + PITA2_MISC); + + /* Check for unique EMS CAN signature */ + if (ems_pci_v1_readb(card, 0) != 0x55 || + ems_pci_v1_readb(card, 1) != 0xAA || + ems_pci_v1_readb(card, 2) != 0x01 || + ems_pci_v1_readb(card, 3) != 0xCB || + ems_pci_v1_readb(card, 4) != 0x11) { + dev_err(&pdev->dev, + "Not EMS Dr. Thomas Wuensche interface\n"); + err = -ENODEV; + goto failure_cleanup; + } + } + + if (card->version == 3) { + /* ASIX chip asserts local reset to CAN controllers + * after bootup until it is deasserted + */ + writel(readl(card->conf_addr + ASIX_LIEMR) & ~ASIX_LIEMR_LRST, + card->conf_addr + ASIX_LIEMR); + } + + ems_pci_card_reset(card); + + /* Detect available channels */ + for (i = 0; i < max_chan; i++) { + dev = alloc_sja1000dev(0); + if (!dev) { + err = -ENOMEM; + goto failure_cleanup; + } + + card->net_dev[i] = dev; + priv = netdev_priv(dev); + priv->priv = card; + priv->irq_flags = IRQF_SHARED; + + dev->irq = pdev->irq; + + if (card->version == 1) { + priv->read_reg = ems_pci_v1_read_reg; + priv->write_reg = ems_pci_v1_write_reg; + priv->post_irq = ems_pci_v1_post_irq; + priv->reg_base = card->base_addr + EMS_PCI_V1_CAN_BASE_OFFSET + + (i * EMS_PCI_V1_CAN_CTRL_SIZE); + } else if (card->version == 2) { + priv->read_reg = ems_pci_v2_read_reg; + priv->write_reg = ems_pci_v2_write_reg; + priv->post_irq = ems_pci_v2_post_irq; + priv->reg_base = card->base_addr + EMS_PCI_V2_CAN_BASE_OFFSET + + (i * EMS_PCI_V2_CAN_CTRL_SIZE); + } else { + priv->read_reg = ems_pci_v3_read_reg; + priv->write_reg = ems_pci_v3_write_reg; + priv->post_irq = ems_pci_v3_post_irq; + priv->reg_base = card->base_addr + EMS_PCI_V3_CAN_BASE_OFFSET + + (i * EMS_PCI_V3_CAN_CTRL_SIZE); + } + + /* Check if channel is present */ + if (ems_pci_check_chan(priv)) { + priv->can.clock.freq = EMS_PCI_CAN_CLOCK; + priv->ocr = EMS_PCI_OCR; + priv->cdr = EMS_PCI_CDR; + + SET_NETDEV_DEV(dev, &pdev->dev); + dev->dev_id = i; + + if (card->version == 1) { + /* reset int flag of pita */ + writel(PITA2_ICR_INT0_EN | PITA2_ICR_INT0, + card->conf_addr + PITA2_ICR); + } else if (card->version == 2) { + /* enable IRQ in PLX 9030 */ + writel(PLX_ICSR_ENA_CLR, + card->conf_addr + PLX_ICSR); + } else { + /* Enable IRQ in AX99100 */ + writel(ASIX_LINTSR_INT0AC, card->conf_addr + ASIX_LINTSR); + /* Enable local INT0 input enable */ + writel(readl(card->conf_addr + ASIX_LIEMR) | ASIX_LIEMR_L0EINTEN, + card->conf_addr + ASIX_LIEMR); + } + + /* Register SJA1000 device */ + err = register_sja1000dev(dev); + if (err) { + dev_err(&pdev->dev, + "Registering device failed: %pe\n", + ERR_PTR(err)); + free_sja1000dev(dev); + goto failure_cleanup; + } + + card->channels++; + + dev_info(&pdev->dev, "Channel #%d at 0x%p, irq %d\n", + i + 1, priv->reg_base, dev->irq); + } else { + free_sja1000dev(dev); + } + } + + return 0; + +failure_cleanup: + dev_err(&pdev->dev, "Error: %d. Cleaning Up.\n", err); + + ems_pci_del_card(pdev); + + return err; +} + +static struct pci_driver ems_pci_driver = { + .name = DRV_NAME, + .id_table = ems_pci_tbl, + .probe = ems_pci_add_card, + .remove = ems_pci_del_card, +}; + +module_pci_driver(ems_pci_driver); diff --git a/drivers/net/can/sja1000/ems_pcmcia.c b/drivers/net/can/sja1000/ems_pcmcia.c new file mode 100644 index 0000000000..4642b6d4aa --- /dev/null +++ b/drivers/net/can/sja1000/ems_pcmcia.c @@ -0,0 +1,316 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2008 Sebastian Haas (initial chardev implementation) + * Copyright (C) 2010 Markus Plessing + * Rework for mainline by Oliver Hartkopp + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "sja1000.h" + +#define DRV_NAME "ems_pcmcia" + +MODULE_AUTHOR("Markus Plessing "); +MODULE_DESCRIPTION("Socket-CAN driver for EMS CPC-CARD cards"); +MODULE_LICENSE("GPL v2"); + +#define EMS_PCMCIA_MAX_CHAN 2 + +struct ems_pcmcia_card { + int channels; + struct pcmcia_device *pcmcia_dev; + struct net_device *net_dev[EMS_PCMCIA_MAX_CHAN]; + void __iomem *base_addr; +}; + +#define EMS_PCMCIA_CAN_CLOCK (16000000 / 2) + +/* + * The board configuration is probably following: + * RX1 is connected to ground. + * TX1 is not connected. + * CLKO is not connected. + * Setting the OCR register to 0xDA is a good idea. + * This means normal output mode , push-pull and the correct polarity. + */ +#define EMS_PCMCIA_OCR (OCR_TX0_PUSHPULL | OCR_TX1_PUSHPULL) + +/* + * In the CDR register, you should set CBP to 1. + * You will probably also want to set the clock divider value to 7 + * (meaning direct oscillator output) because the second SJA1000 chip + * is driven by the first one CLKOUT output. + */ +#define EMS_PCMCIA_CDR (CDR_CBP | CDR_CLKOUT_MASK) +#define EMS_PCMCIA_MEM_SIZE 4096 /* Size of the remapped io-memory */ +#define EMS_PCMCIA_CAN_BASE_OFFSET 0x100 /* Offset where controllers starts */ +#define EMS_PCMCIA_CAN_CTRL_SIZE 0x80 /* Memory size for each controller */ + +#define EMS_CMD_RESET 0x00 /* Perform a reset of the card */ +#define EMS_CMD_MAP 0x03 /* Map CAN controllers into card' memory */ +#define EMS_CMD_UMAP 0x02 /* Unmap CAN controllers from card' memory */ + +static struct pcmcia_device_id ems_pcmcia_tbl[] = { + PCMCIA_DEVICE_PROD_ID123("EMS_T_W", "CPC-Card", "V2.0", 0xeab1ea23, + 0xa338573f, 0xe4575800), + PCMCIA_DEVICE_NULL, +}; + +MODULE_DEVICE_TABLE(pcmcia, ems_pcmcia_tbl); + +static u8 ems_pcmcia_read_reg(const struct sja1000_priv *priv, int port) +{ + return readb(priv->reg_base + port); +} + +static void ems_pcmcia_write_reg(const struct sja1000_priv *priv, int port, + u8 val) +{ + writeb(val, priv->reg_base + port); +} + +static irqreturn_t ems_pcmcia_interrupt(int irq, void *dev_id) +{ + struct ems_pcmcia_card *card = dev_id; + struct net_device *dev; + irqreturn_t retval = IRQ_NONE; + int i, again; + + /* Card not present */ + if (readw(card->base_addr) != 0xAA55) + return IRQ_HANDLED; + + do { + again = 0; + + /* Check interrupt for each channel */ + for (i = 0; i < card->channels; i++) { + dev = card->net_dev[i]; + if (!dev) + continue; + + if (sja1000_interrupt(irq, dev) == IRQ_HANDLED) + again = 1; + } + /* At least one channel handled the interrupt */ + if (again) + retval = IRQ_HANDLED; + + } while (again); + + return retval; +} + +/* + * Check if a CAN controller is present at the specified location + * by trying to set 'em into the PeliCAN mode + */ +static inline int ems_pcmcia_check_chan(struct sja1000_priv *priv) +{ + /* Make sure SJA1000 is in reset mode */ + ems_pcmcia_write_reg(priv, SJA1000_MOD, 1); + ems_pcmcia_write_reg(priv, SJA1000_CDR, CDR_PELICAN); + + /* read reset-values */ + if (ems_pcmcia_read_reg(priv, SJA1000_CDR) == CDR_PELICAN) + return 1; + + return 0; +} + +static void ems_pcmcia_del_card(struct pcmcia_device *pdev) +{ + struct ems_pcmcia_card *card = pdev->priv; + struct net_device *dev; + int i; + + free_irq(pdev->irq, card); + + for (i = 0; i < card->channels; i++) { + dev = card->net_dev[i]; + if (!dev) + continue; + + printk(KERN_INFO "%s: removing %s on channel #%d\n", + DRV_NAME, dev->name, i); + unregister_sja1000dev(dev); + free_sja1000dev(dev); + } + + writeb(EMS_CMD_UMAP, card->base_addr); + iounmap(card->base_addr); + kfree(card); + + pdev->priv = NULL; +} + +/* + * Probe PCI device for EMS CAN signature and register each available + * CAN channel to SJA1000 Socket-CAN subsystem. + */ +static int ems_pcmcia_add_card(struct pcmcia_device *pdev, unsigned long base) +{ + struct sja1000_priv *priv; + struct net_device *dev; + struct ems_pcmcia_card *card; + int err, i; + + /* Allocating card structures to hold addresses, ... */ + card = kzalloc(sizeof(struct ems_pcmcia_card), GFP_KERNEL); + if (!card) + return -ENOMEM; + + pdev->priv = card; + card->channels = 0; + + card->base_addr = ioremap(base, EMS_PCMCIA_MEM_SIZE); + if (!card->base_addr) { + err = -ENOMEM; + goto failure_cleanup; + } + + /* Check for unique EMS CAN signature */ + if (readw(card->base_addr) != 0xAA55) { + err = -ENODEV; + goto failure_cleanup; + } + + /* Request board reset */ + writeb(EMS_CMD_RESET, card->base_addr); + + /* Make sure CAN controllers are mapped into card's memory space */ + writeb(EMS_CMD_MAP, card->base_addr); + + /* Detect available channels */ + for (i = 0; i < EMS_PCMCIA_MAX_CHAN; i++) { + dev = alloc_sja1000dev(0); + if (!dev) { + err = -ENOMEM; + goto failure_cleanup; + } + + card->net_dev[i] = dev; + priv = netdev_priv(dev); + priv->priv = card; + SET_NETDEV_DEV(dev, &pdev->dev); + dev->dev_id = i; + + priv->irq_flags = IRQF_SHARED; + dev->irq = pdev->irq; + priv->reg_base = card->base_addr + EMS_PCMCIA_CAN_BASE_OFFSET + + (i * EMS_PCMCIA_CAN_CTRL_SIZE); + + /* Check if channel is present */ + if (ems_pcmcia_check_chan(priv)) { + priv->read_reg = ems_pcmcia_read_reg; + priv->write_reg = ems_pcmcia_write_reg; + priv->can.clock.freq = EMS_PCMCIA_CAN_CLOCK; + priv->ocr = EMS_PCMCIA_OCR; + priv->cdr = EMS_PCMCIA_CDR; + priv->flags |= SJA1000_CUSTOM_IRQ_HANDLER; + + /* Register SJA1000 device */ + err = register_sja1000dev(dev); + if (err) { + free_sja1000dev(dev); + goto failure_cleanup; + } + + card->channels++; + + printk(KERN_INFO "%s: registered %s on channel " + "#%d at 0x%p, irq %d\n", DRV_NAME, dev->name, + i, priv->reg_base, dev->irq); + } else + free_sja1000dev(dev); + } + + if (!card->channels) { + err = -ENODEV; + goto failure_cleanup; + } + + err = request_irq(pdev->irq, &ems_pcmcia_interrupt, IRQF_SHARED, + DRV_NAME, card); + if (!err) + return 0; + +failure_cleanup: + ems_pcmcia_del_card(pdev); + return err; +} + +/* + * Setup PCMCIA socket and probe for EMS CPC-CARD + */ +static int ems_pcmcia_probe(struct pcmcia_device *dev) +{ + int csval; + + /* General socket configuration */ + dev->config_flags |= CONF_ENABLE_IRQ; + dev->config_index = 1; + dev->config_regs = PRESENT_OPTION; + + /* The io structure describes IO port mapping */ + dev->resource[0]->end = 16; + dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + dev->resource[1]->end = 16; + dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_16; + dev->io_lines = 5; + + /* Allocate a memory window */ + dev->resource[2]->flags = + (WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_CM | WIN_ENABLE); + dev->resource[2]->start = dev->resource[2]->end = 0; + + csval = pcmcia_request_window(dev, dev->resource[2], 0); + if (csval) { + dev_err(&dev->dev, "pcmcia_request_window failed (err=%d)\n", + csval); + return 0; + } + + csval = pcmcia_map_mem_page(dev, dev->resource[2], dev->config_base); + if (csval) { + dev_err(&dev->dev, "pcmcia_map_mem_page failed (err=%d)\n", + csval); + return 0; + } + + csval = pcmcia_enable_device(dev); + if (csval) { + dev_err(&dev->dev, "pcmcia_enable_device failed (err=%d)\n", + csval); + return 0; + } + + ems_pcmcia_add_card(dev, dev->resource[2]->start); + return 0; +} + +/* + * Release claimed resources + */ +static void ems_pcmcia_remove(struct pcmcia_device *dev) +{ + ems_pcmcia_del_card(dev); + pcmcia_disable_device(dev); +} + +static struct pcmcia_driver ems_pcmcia_driver = { + .name = DRV_NAME, + .probe = ems_pcmcia_probe, + .remove = ems_pcmcia_remove, + .id_table = ems_pcmcia_tbl, +}; +module_pcmcia_driver(ems_pcmcia_driver); diff --git a/drivers/net/can/sja1000/f81601.c b/drivers/net/can/sja1000/f81601.c new file mode 100644 index 0000000000..8f25e95814 --- /dev/null +++ b/drivers/net/can/sja1000/f81601.c @@ -0,0 +1,211 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Fintek F81601 PCIE to 2 CAN controller driver + * + * Copyright (C) 2019 Peter Hong + * Copyright (C) 2019 Linux Foundation + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "sja1000.h" + +#define F81601_PCI_MAX_CHAN 2 + +#define F81601_DECODE_REG 0x209 +#define F81601_IO_MODE BIT(7) +#define F81601_MEM_MODE BIT(6) +#define F81601_CFG_MODE BIT(5) +#define F81601_CAN2_INTERNAL_CLK BIT(3) +#define F81601_CAN1_INTERNAL_CLK BIT(2) +#define F81601_CAN2_EN BIT(1) +#define F81601_CAN1_EN BIT(0) + +#define F81601_TRAP_REG 0x20a +#define F81601_CAN2_HAS_EN BIT(4) + +struct f81601_pci_card { + void __iomem *addr; + spinlock_t lock; /* use this spin lock only for write access */ + struct pci_dev *dev; + struct net_device *net_dev[F81601_PCI_MAX_CHAN]; +}; + +static const struct pci_device_id f81601_pci_tbl[] = { + { PCI_DEVICE(0x1c29, 0x1703) }, + { /* sentinel */ }, +}; + +MODULE_DEVICE_TABLE(pci, f81601_pci_tbl); + +static bool internal_clk = true; +module_param(internal_clk, bool, 0444); +MODULE_PARM_DESC(internal_clk, "Use internal clock, default true (24MHz)"); + +static unsigned int external_clk; +module_param(external_clk, uint, 0444); +MODULE_PARM_DESC(external_clk, "External clock when internal_clk disabled"); + +static u8 f81601_pci_read_reg(const struct sja1000_priv *priv, int port) +{ + return readb(priv->reg_base + port); +} + +static void f81601_pci_write_reg(const struct sja1000_priv *priv, int port, + u8 val) +{ + struct f81601_pci_card *card = priv->priv; + unsigned long flags; + + spin_lock_irqsave(&card->lock, flags); + writeb(val, priv->reg_base + port); + readb(priv->reg_base); + spin_unlock_irqrestore(&card->lock, flags); +} + +static void f81601_pci_remove(struct pci_dev *pdev) +{ + struct f81601_pci_card *card = pci_get_drvdata(pdev); + struct net_device *dev; + int i; + + for (i = 0; i < ARRAY_SIZE(card->net_dev); i++) { + dev = card->net_dev[i]; + if (!dev) + continue; + + dev_info(&pdev->dev, "%s: Removing %s\n", __func__, dev->name); + + unregister_sja1000dev(dev); + free_sja1000dev(dev); + } +} + +/* Probe F81601 based device for the SJA1000 chips and register each + * available CAN channel to SJA1000 Socket-CAN subsystem. + */ +static int f81601_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct sja1000_priv *priv; + struct net_device *dev; + struct f81601_pci_card *card; + int err, i, count; + u8 tmp; + + if (pcim_enable_device(pdev) < 0) { + dev_err(&pdev->dev, "Failed to enable PCI device\n"); + return -ENODEV; + } + + dev_info(&pdev->dev, "Detected card at slot #%i\n", + PCI_SLOT(pdev->devfn)); + + card = devm_kzalloc(&pdev->dev, sizeof(*card), GFP_KERNEL); + if (!card) + return -ENOMEM; + + card->dev = pdev; + spin_lock_init(&card->lock); + + pci_set_drvdata(pdev, card); + + tmp = F81601_IO_MODE | F81601_MEM_MODE | F81601_CFG_MODE | + F81601_CAN2_EN | F81601_CAN1_EN; + + if (internal_clk) { + tmp |= F81601_CAN2_INTERNAL_CLK | F81601_CAN1_INTERNAL_CLK; + + dev_info(&pdev->dev, + "F81601 running with internal clock: 24Mhz\n"); + } else { + dev_info(&pdev->dev, + "F81601 running with external clock: %dMhz\n", + external_clk / 1000000); + } + + pci_write_config_byte(pdev, F81601_DECODE_REG, tmp); + + card->addr = pcim_iomap(pdev, 0, pci_resource_len(pdev, 0)); + + if (!card->addr) { + err = -ENOMEM; + dev_err(&pdev->dev, "%s: Failed to remap BAR\n", __func__); + goto failure_cleanup; + } + + /* read CAN2_HW_EN strap pin to detect how many CANBUS do we have */ + count = ARRAY_SIZE(card->net_dev); + pci_read_config_byte(pdev, F81601_TRAP_REG, &tmp); + if (!(tmp & F81601_CAN2_HAS_EN)) + count = 1; + + for (i = 0; i < count; i++) { + dev = alloc_sja1000dev(0); + if (!dev) { + err = -ENOMEM; + goto failure_cleanup; + } + + priv = netdev_priv(dev); + priv->priv = card; + priv->irq_flags = IRQF_SHARED; + priv->reg_base = card->addr + 0x80 * i; + priv->read_reg = f81601_pci_read_reg; + priv->write_reg = f81601_pci_write_reg; + + if (internal_clk) + priv->can.clock.freq = 24000000 / 2; + else + priv->can.clock.freq = external_clk / 2; + + priv->ocr = OCR_TX0_PUSHPULL | OCR_TX1_PUSHPULL; + priv->cdr = CDR_CBP; + + SET_NETDEV_DEV(dev, &pdev->dev); + dev->dev_id = i; + dev->irq = pdev->irq; + + /* Register SJA1000 device */ + err = register_sja1000dev(dev); + if (err) { + dev_err(&pdev->dev, + "%s: Registering device failed: %x\n", __func__, + err); + free_sja1000dev(dev); + goto failure_cleanup; + } + + card->net_dev[i] = dev; + dev_info(&pdev->dev, "Channel #%d, %s at 0x%p, irq %d\n", i, + dev->name, priv->reg_base, dev->irq); + } + + return 0; + + failure_cleanup: + dev_err(&pdev->dev, "%s: failed: %d. Cleaning Up.\n", __func__, err); + f81601_pci_remove(pdev); + + return err; +} + +static struct pci_driver f81601_pci_driver = { + .name = "f81601", + .id_table = f81601_pci_tbl, + .probe = f81601_pci_probe, + .remove = f81601_pci_remove, +}; + +MODULE_DESCRIPTION("Fintek F81601 PCIE to 2 CANBUS adaptor driver"); +MODULE_AUTHOR("Peter Hong "); +MODULE_LICENSE("GPL v2"); + +module_pci_driver(f81601_pci_driver); diff --git a/drivers/net/can/sja1000/kvaser_pci.c b/drivers/net/can/sja1000/kvaser_pci.c new file mode 100644 index 0000000000..95fe9ee1ce --- /dev/null +++ b/drivers/net/can/sja1000/kvaser_pci.c @@ -0,0 +1,384 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2008 Per Dalen + * + * Parts of this software are based on (derived) the following: + * + * - Kvaser linux driver, version 4.72 BETA + * Copyright (C) 2002-2007 KVASER AB + * + * - Lincan driver, version 0.3.3, OCERA project + * Copyright (C) 2004 Pavel Pisa + * Copyright (C) 2001 Arnaud Westenberg + * + * - Socketcan SJA1000 drivers + * Copyright (C) 2007 Wolfgang Grandegger + * Copyright (c) 2002-2007 Volkswagen Group Electronic Research + * Copyright (c) 2003 Matthias Brukner, Trajet Gmbh, Rebenring 33, + * 38106 Braunschweig, GERMANY + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "sja1000.h" + +#define DRV_NAME "kvaser_pci" + +MODULE_AUTHOR("Per Dalen "); +MODULE_DESCRIPTION("Socket-CAN driver for KVASER PCAN PCI cards"); +MODULE_LICENSE("GPL v2"); + +#define MAX_NO_OF_CHANNELS 4 /* max no of channels on a single card */ + +struct kvaser_pci { + int channel; + struct pci_dev *pci_dev; + struct net_device *slave_dev[MAX_NO_OF_CHANNELS-1]; + void __iomem *conf_addr; + void __iomem *res_addr; + int no_channels; + u8 xilinx_ver; +}; + +#define KVASER_PCI_CAN_CLOCK (16000000 / 2) + +/* + * The board configuration is probably following: + * RX1 is connected to ground. + * TX1 is not connected. + * CLKO is not connected. + * Setting the OCR register to 0xDA is a good idea. + * This means normal output mode , push-pull and the correct polarity. + */ +#define KVASER_PCI_OCR (OCR_TX0_PUSHPULL | OCR_TX1_PUSHPULL) + +/* + * In the CDR register, you should set CBP to 1. + * You will probably also want to set the clock divider value to 0 + * (meaning divide-by-2), the Pelican bit, and the clock-off bit + * (you will have no need for CLKOUT anyway). + */ +#define KVASER_PCI_CDR (CDR_CBP | CDR_CLKOUT_MASK) + +/* + * These register values are valid for revision 14 of the Xilinx logic. + */ +#define XILINX_VERINT 7 /* Lower nibble simulate interrupts, + high nibble version number. */ + +#define XILINX_PRESUMED_VERSION 14 + +/* + * Important S5920 registers + */ +#define S5920_INTCSR 0x38 +#define S5920_PTCR 0x60 +#define INTCSR_ADDON_INTENABLE_M 0x2000 + + +#define KVASER_PCI_PORT_BYTES 0x20 + +#define PCI_CONFIG_PORT_SIZE 0x80 /* size of the config io-memory */ +#define PCI_PORT_SIZE 0x80 /* size of a channel io-memory */ +#define PCI_PORT_XILINX_SIZE 0x08 /* size of a xilinx io-memory */ + +#define KVASER_PCI_VENDOR_ID1 0x10e8 /* the PCI device and vendor IDs */ +#define KVASER_PCI_DEVICE_ID1 0x8406 + +#define KVASER_PCI_VENDOR_ID2 0x1a07 /* the PCI device and vendor IDs */ +#define KVASER_PCI_DEVICE_ID2 0x0008 + +static const struct pci_device_id kvaser_pci_tbl[] = { + {KVASER_PCI_VENDOR_ID1, KVASER_PCI_DEVICE_ID1, PCI_ANY_ID, PCI_ANY_ID,}, + {KVASER_PCI_VENDOR_ID2, KVASER_PCI_DEVICE_ID2, PCI_ANY_ID, PCI_ANY_ID,}, + { 0,} +}; + +MODULE_DEVICE_TABLE(pci, kvaser_pci_tbl); + +static u8 kvaser_pci_read_reg(const struct sja1000_priv *priv, int port) +{ + return ioread8(priv->reg_base + port); +} + +static void kvaser_pci_write_reg(const struct sja1000_priv *priv, + int port, u8 val) +{ + iowrite8(val, priv->reg_base + port); +} + +static void kvaser_pci_disable_irq(struct net_device *dev) +{ + struct sja1000_priv *priv = netdev_priv(dev); + struct kvaser_pci *board = priv->priv; + u32 intcsr; + + /* Disable interrupts from card */ + intcsr = ioread32(board->conf_addr + S5920_INTCSR); + intcsr &= ~INTCSR_ADDON_INTENABLE_M; + iowrite32(intcsr, board->conf_addr + S5920_INTCSR); +} + +static void kvaser_pci_enable_irq(struct net_device *dev) +{ + struct sja1000_priv *priv = netdev_priv(dev); + struct kvaser_pci *board = priv->priv; + u32 tmp_en_io; + + /* Enable interrupts from card */ + tmp_en_io = ioread32(board->conf_addr + S5920_INTCSR); + tmp_en_io |= INTCSR_ADDON_INTENABLE_M; + iowrite32(tmp_en_io, board->conf_addr + S5920_INTCSR); +} + +static int number_of_sja1000_chip(void __iomem *base_addr) +{ + u8 status; + int i; + + for (i = 0; i < MAX_NO_OF_CHANNELS; i++) { + /* reset chip */ + iowrite8(MOD_RM, base_addr + + (i * KVASER_PCI_PORT_BYTES) + SJA1000_MOD); + status = ioread8(base_addr + + (i * KVASER_PCI_PORT_BYTES) + SJA1000_MOD); + /* check reset bit */ + if (!(status & MOD_RM)) + break; + } + + return i; +} + +static void kvaser_pci_del_chan(struct net_device *dev) +{ + struct sja1000_priv *priv; + struct kvaser_pci *board; + int i; + + if (!dev) + return; + priv = netdev_priv(dev); + board = priv->priv; + if (!board) + return; + + dev_info(&board->pci_dev->dev, "Removing device %s\n", + dev->name); + + /* Disable PCI interrupts */ + kvaser_pci_disable_irq(dev); + + for (i = 0; i < board->no_channels - 1; i++) { + if (board->slave_dev[i]) { + dev_info(&board->pci_dev->dev, "Removing device %s\n", + board->slave_dev[i]->name); + unregister_sja1000dev(board->slave_dev[i]); + free_sja1000dev(board->slave_dev[i]); + } + } + unregister_sja1000dev(dev); + + pci_iounmap(board->pci_dev, priv->reg_base); + pci_iounmap(board->pci_dev, board->conf_addr); + pci_iounmap(board->pci_dev, board->res_addr); + + free_sja1000dev(dev); +} + +static int kvaser_pci_add_chan(struct pci_dev *pdev, int channel, + struct net_device **master_dev, + void __iomem *conf_addr, + void __iomem *res_addr, + void __iomem *base_addr) +{ + struct net_device *dev; + struct sja1000_priv *priv; + struct kvaser_pci *board; + int err; + + dev = alloc_sja1000dev(sizeof(struct kvaser_pci)); + if (dev == NULL) + return -ENOMEM; + + priv = netdev_priv(dev); + board = priv->priv; + + board->pci_dev = pdev; + board->channel = channel; + + /* S5920 */ + board->conf_addr = conf_addr; + + /* XILINX board wide address */ + board->res_addr = res_addr; + + if (channel == 0) { + board->xilinx_ver = + ioread8(board->res_addr + XILINX_VERINT) >> 4; + + /* Assert PTADR# - we're in passive mode so the other bits are + not important */ + iowrite32(0x80808080UL, board->conf_addr + S5920_PTCR); + + /* Enable interrupts from card */ + kvaser_pci_enable_irq(dev); + } else { + struct sja1000_priv *master_priv = netdev_priv(*master_dev); + struct kvaser_pci *master_board = master_priv->priv; + master_board->slave_dev[channel - 1] = dev; + master_board->no_channels = channel + 1; + board->xilinx_ver = master_board->xilinx_ver; + } + + priv->reg_base = base_addr + channel * KVASER_PCI_PORT_BYTES; + + priv->read_reg = kvaser_pci_read_reg; + priv->write_reg = kvaser_pci_write_reg; + + priv->can.clock.freq = KVASER_PCI_CAN_CLOCK; + + priv->ocr = KVASER_PCI_OCR; + priv->cdr = KVASER_PCI_CDR; + + priv->irq_flags = IRQF_SHARED; + dev->irq = pdev->irq; + + dev_info(&pdev->dev, "reg_base=%p conf_addr=%p irq=%d\n", + priv->reg_base, board->conf_addr, dev->irq); + + SET_NETDEV_DEV(dev, &pdev->dev); + dev->dev_id = channel; + + /* Register SJA1000 device */ + err = register_sja1000dev(dev); + if (err) { + dev_err(&pdev->dev, "Registering device failed (err=%d)\n", + err); + goto failure; + } + + if (channel == 0) + *master_dev = dev; + + return 0; + +failure: + kvaser_pci_del_chan(dev); + return err; +} + +static int kvaser_pci_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + int err; + struct net_device *master_dev = NULL; + struct sja1000_priv *priv; + struct kvaser_pci *board; + int no_channels; + void __iomem *base_addr = NULL; + void __iomem *conf_addr = NULL; + void __iomem *res_addr = NULL; + int i; + + dev_info(&pdev->dev, "initializing device %04x:%04x\n", + pdev->vendor, pdev->device); + + err = pci_enable_device(pdev); + if (err) + goto failure; + + err = pci_request_regions(pdev, DRV_NAME); + if (err) + goto failure_release_pci; + + /* S5920 */ + conf_addr = pci_iomap(pdev, 0, PCI_CONFIG_PORT_SIZE); + if (conf_addr == NULL) { + err = -ENODEV; + goto failure_release_regions; + } + + /* XILINX board wide address */ + res_addr = pci_iomap(pdev, 2, PCI_PORT_XILINX_SIZE); + if (res_addr == NULL) { + err = -ENOMEM; + goto failure_iounmap; + } + + base_addr = pci_iomap(pdev, 1, PCI_PORT_SIZE); + if (base_addr == NULL) { + err = -ENOMEM; + goto failure_iounmap; + } + + no_channels = number_of_sja1000_chip(base_addr); + if (no_channels == 0) { + err = -ENOMEM; + goto failure_iounmap; + } + + for (i = 0; i < no_channels; i++) { + err = kvaser_pci_add_chan(pdev, i, &master_dev, + conf_addr, res_addr, + base_addr); + if (err) + goto failure_cleanup; + } + + priv = netdev_priv(master_dev); + board = priv->priv; + + dev_info(&pdev->dev, "xilinx version=%d number of channels=%d\n", + board->xilinx_ver, board->no_channels); + + pci_set_drvdata(pdev, master_dev); + return 0; + +failure_cleanup: + kvaser_pci_del_chan(master_dev); + +failure_iounmap: + if (conf_addr != NULL) + pci_iounmap(pdev, conf_addr); + if (res_addr != NULL) + pci_iounmap(pdev, res_addr); + if (base_addr != NULL) + pci_iounmap(pdev, base_addr); + +failure_release_regions: + pci_release_regions(pdev); + +failure_release_pci: + pci_disable_device(pdev); + +failure: + return err; + +} + +static void kvaser_pci_remove_one(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + + kvaser_pci_del_chan(dev); + + pci_release_regions(pdev); + pci_disable_device(pdev); +} + +static struct pci_driver kvaser_pci_driver = { + .name = DRV_NAME, + .id_table = kvaser_pci_tbl, + .probe = kvaser_pci_init_one, + .remove = kvaser_pci_remove_one, +}; + +module_pci_driver(kvaser_pci_driver); diff --git a/drivers/net/can/sja1000/peak_pci.c b/drivers/net/can/sja1000/peak_pci.c new file mode 100644 index 0000000000..84f34020aa --- /dev/null +++ b/drivers/net/can/sja1000/peak_pci.c @@ -0,0 +1,781 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2007, 2011 Wolfgang Grandegger + * Copyright (C) 2012 Stephane Grosjean + * + * Derived from the PCAN project file driver/src/pcan_pci.c: + * + * Copyright (C) 2001-2006 PEAK System-Technik GmbH + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "sja1000.h" + +MODULE_AUTHOR("Stephane Grosjean "); +MODULE_DESCRIPTION("Socket-CAN driver for PEAK PCAN PCI family cards"); +MODULE_LICENSE("GPL v2"); + +#define DRV_NAME "peak_pci" + +/* FPGA cards FW version registers */ +#define PEAK_VER_REG1 0x40 +#define PEAK_VER_REG2 0x44 + +struct peak_pciec_card; +struct peak_pci_chan { + void __iomem *cfg_base; /* Common for all channels */ + struct net_device *prev_dev; /* Chain of network devices */ + u16 icr_mask; /* Interrupt mask for fast ack */ + struct peak_pciec_card *pciec_card; /* only for PCIeC LEDs */ +}; + +#define PEAK_PCI_CAN_CLOCK (16000000 / 2) + +#define PEAK_PCI_CDR (CDR_CBP | CDR_CLKOUT_MASK) +#define PEAK_PCI_OCR OCR_TX0_PUSHPULL + +/* Important PITA registers */ +#define PITA_ICR 0x00 /* Interrupt control register */ +#define PITA_GPIOICR 0x18 /* GPIO interface control register */ +#define PITA_MISC 0x1C /* Miscellaneous register */ + +#define PEAK_PCI_CFG_SIZE 0x1000 /* Size of the config PCI bar */ +#define PEAK_PCI_CHAN_SIZE 0x0400 /* Size used by the channel */ + +#define PEAK_PCI_VENDOR_ID 0x001C /* The PCI device and vendor IDs */ +#define PEAK_PCI_DEVICE_ID 0x0001 /* for PCI/PCIe slot cards */ +#define PEAK_PCIEC_DEVICE_ID 0x0002 /* for ExpressCard slot cards */ +#define PEAK_PCIE_DEVICE_ID 0x0003 /* for nextgen PCIe slot cards */ +#define PEAK_CPCI_DEVICE_ID 0x0004 /* for nextgen cPCI slot cards */ +#define PEAK_MPCI_DEVICE_ID 0x0005 /* for nextgen miniPCI slot cards */ +#define PEAK_PC_104P_DEVICE_ID 0x0006 /* PCAN-PC/104+ cards */ +#define PEAK_PCI_104E_DEVICE_ID 0x0007 /* PCAN-PCI/104 Express cards */ +#define PEAK_MPCIE_DEVICE_ID 0x0008 /* The miniPCIe slot cards */ +#define PEAK_PCIE_OEM_ID 0x0009 /* PCAN-PCI Express OEM */ +#define PEAK_PCIEC34_DEVICE_ID 0x000A /* PCAN-PCI Express 34 (one channel) */ + +#define PEAK_PCI_CHAN_MAX 4 + +static const u16 peak_pci_icr_masks[PEAK_PCI_CHAN_MAX] = { + 0x02, 0x01, 0x40, 0x80 +}; + +static const struct pci_device_id peak_pci_tbl[] = { + { + PEAK_PCI_VENDOR_ID, PEAK_PCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, + .driver_data = (kernel_ulong_t)"PCAN-PCI", + }, { + PEAK_PCI_VENDOR_ID, PEAK_PCIE_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, + .driver_data = (kernel_ulong_t)"PCAN-PCI Express", + }, { + PEAK_PCI_VENDOR_ID, PEAK_MPCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, + .driver_data = (kernel_ulong_t)"PCAN-miniPCI", + }, { + PEAK_PCI_VENDOR_ID, PEAK_MPCIE_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, + .driver_data = (kernel_ulong_t)"PCAN-miniPCIe", + }, { + PEAK_PCI_VENDOR_ID, PEAK_PC_104P_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, + .driver_data = (kernel_ulong_t)"PCAN-PC/104-Plus Quad", + }, { + PEAK_PCI_VENDOR_ID, PEAK_PCI_104E_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, + .driver_data = (kernel_ulong_t)"PCAN-PCI/104-Express", + }, { + PEAK_PCI_VENDOR_ID, PEAK_CPCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, + .driver_data = (kernel_ulong_t)"PCAN-cPCI", + }, { + PEAK_PCI_VENDOR_ID, PEAK_PCIE_OEM_ID, PCI_ANY_ID, PCI_ANY_ID, + .driver_data = (kernel_ulong_t)"PCAN-Chip PCIe", + }, +#ifdef CONFIG_CAN_PEAK_PCIEC + { + PEAK_PCI_VENDOR_ID, PEAK_PCIEC_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, + .driver_data = (kernel_ulong_t)"PCAN-ExpressCard", + }, { + PEAK_PCI_VENDOR_ID, PEAK_PCIEC34_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, + .driver_data = (kernel_ulong_t)"PCAN-ExpressCard 34", + }, +#endif + { /* sentinel */ } +}; + +MODULE_DEVICE_TABLE(pci, peak_pci_tbl); + +#ifdef CONFIG_CAN_PEAK_PCIEC +/* PCAN-ExpressCard needs I2C bit-banging configuration option. */ + +/* GPIOICR byte access offsets */ +#define PITA_GPOUT 0x18 /* GPx output value */ +#define PITA_GPIN 0x19 /* GPx input value */ +#define PITA_GPOEN 0x1A /* configure GPx as output pin */ + +/* I2C GP bits */ +#define PITA_GPIN_SCL 0x01 /* Serial Clock Line */ +#define PITA_GPIN_SDA 0x04 /* Serial DAta line */ + +#define PCA9553_1_SLAVEADDR (0xC4 >> 1) + +/* PCA9553 LS0 fields values */ +enum { + PCA9553_LOW, + PCA9553_HIGHZ, + PCA9553_PWM0, + PCA9553_PWM1 +}; + +/* LEDs control */ +#define PCA9553_ON PCA9553_LOW +#define PCA9553_OFF PCA9553_HIGHZ +#define PCA9553_SLOW PCA9553_PWM0 +#define PCA9553_FAST PCA9553_PWM1 + +#define PCA9553_LED(c) (1 << (c)) +#define PCA9553_LED_STATE(s, c) ((s) << ((c) << 1)) + +#define PCA9553_LED_ON(c) PCA9553_LED_STATE(PCA9553_ON, c) +#define PCA9553_LED_OFF(c) PCA9553_LED_STATE(PCA9553_OFF, c) +#define PCA9553_LED_SLOW(c) PCA9553_LED_STATE(PCA9553_SLOW, c) +#define PCA9553_LED_FAST(c) PCA9553_LED_STATE(PCA9553_FAST, c) +#define PCA9553_LED_MASK(c) PCA9553_LED_STATE(0x03, c) + +#define PCA9553_LED_OFF_ALL (PCA9553_LED_OFF(0) | PCA9553_LED_OFF(1)) + +#define PCA9553_LS0_INIT 0x40 /* initial value (!= from 0x00) */ + +struct peak_pciec_chan { + struct net_device *netdev; + unsigned long prev_rx_bytes; + unsigned long prev_tx_bytes; +}; + +struct peak_pciec_card { + void __iomem *cfg_base; /* Common for all channels */ + void __iomem *reg_base; /* first channel base address */ + u8 led_cache; /* leds state cache */ + + /* PCIExpressCard i2c data */ + struct i2c_algo_bit_data i2c_bit; + struct i2c_adapter led_chip; + struct delayed_work led_work; /* led delayed work */ + int chan_count; + struct peak_pciec_chan channel[PEAK_PCI_CHAN_MAX]; +}; + +/* "normal" pci register write callback is overloaded for leds control */ +static void peak_pci_write_reg(const struct sja1000_priv *priv, + int port, u8 val); + +static inline void pita_set_scl_highz(struct peak_pciec_card *card) +{ + u8 gp_outen = readb(card->cfg_base + PITA_GPOEN) & ~PITA_GPIN_SCL; + + writeb(gp_outen, card->cfg_base + PITA_GPOEN); +} + +static inline void pita_set_sda_highz(struct peak_pciec_card *card) +{ + u8 gp_outen = readb(card->cfg_base + PITA_GPOEN) & ~PITA_GPIN_SDA; + + writeb(gp_outen, card->cfg_base + PITA_GPOEN); +} + +static void peak_pciec_init_pita_gpio(struct peak_pciec_card *card) +{ + /* raise SCL & SDA GPIOs to high-Z */ + pita_set_scl_highz(card); + pita_set_sda_highz(card); +} + +static void pita_setsda(void *data, int state) +{ + struct peak_pciec_card *card = (struct peak_pciec_card *)data; + u8 gp_out, gp_outen; + + /* set output sda always to 0 */ + gp_out = readb(card->cfg_base + PITA_GPOUT) & ~PITA_GPIN_SDA; + writeb(gp_out, card->cfg_base + PITA_GPOUT); + + /* control output sda with GPOEN */ + gp_outen = readb(card->cfg_base + PITA_GPOEN); + if (state) + gp_outen &= ~PITA_GPIN_SDA; + else + gp_outen |= PITA_GPIN_SDA; + + writeb(gp_outen, card->cfg_base + PITA_GPOEN); +} + +static void pita_setscl(void *data, int state) +{ + struct peak_pciec_card *card = (struct peak_pciec_card *)data; + u8 gp_out, gp_outen; + + /* set output scl always to 0 */ + gp_out = readb(card->cfg_base + PITA_GPOUT) & ~PITA_GPIN_SCL; + writeb(gp_out, card->cfg_base + PITA_GPOUT); + + /* control output scl with GPOEN */ + gp_outen = readb(card->cfg_base + PITA_GPOEN); + if (state) + gp_outen &= ~PITA_GPIN_SCL; + else + gp_outen |= PITA_GPIN_SCL; + + writeb(gp_outen, card->cfg_base + PITA_GPOEN); +} + +static int pita_getsda(void *data) +{ + struct peak_pciec_card *card = (struct peak_pciec_card *)data; + + /* set tristate */ + pita_set_sda_highz(card); + + return (readb(card->cfg_base + PITA_GPIN) & PITA_GPIN_SDA) ? 1 : 0; +} + +static int pita_getscl(void *data) +{ + struct peak_pciec_card *card = (struct peak_pciec_card *)data; + + /* set tristate */ + pita_set_scl_highz(card); + + return (readb(card->cfg_base + PITA_GPIN) & PITA_GPIN_SCL) ? 1 : 0; +} + +/* write commands to the LED chip though the I2C-bus of the PCAN-PCIeC */ +static int peak_pciec_write_pca9553(struct peak_pciec_card *card, + u8 offset, u8 data) +{ + u8 buffer[2] = { + offset, + data + }; + struct i2c_msg msg = { + .addr = PCA9553_1_SLAVEADDR, + .len = 2, + .buf = buffer, + }; + int ret; + + /* cache led mask */ + if (offset == 5 && data == card->led_cache) + return 0; + + ret = i2c_transfer(&card->led_chip, &msg, 1); + if (ret < 0) + return ret; + + if (offset == 5) + card->led_cache = data; + + return 0; +} + +/* delayed work callback used to control the LEDs */ +static void peak_pciec_led_work(struct work_struct *work) +{ + struct peak_pciec_card *card = + container_of(work, struct peak_pciec_card, led_work.work); + struct net_device *netdev; + u8 new_led = card->led_cache; + int i, up_count = 0; + + /* first check what is to do */ + for (i = 0; i < card->chan_count; i++) { + /* default is: not configured */ + new_led &= ~PCA9553_LED_MASK(i); + new_led |= PCA9553_LED_ON(i); + + netdev = card->channel[i].netdev; + if (!netdev || !(netdev->flags & IFF_UP)) + continue; + + up_count++; + + /* no activity (but configured) */ + new_led &= ~PCA9553_LED_MASK(i); + new_led |= PCA9553_LED_SLOW(i); + + /* if bytes counters changed, set fast blinking led */ + if (netdev->stats.rx_bytes != card->channel[i].prev_rx_bytes) { + card->channel[i].prev_rx_bytes = netdev->stats.rx_bytes; + new_led &= ~PCA9553_LED_MASK(i); + new_led |= PCA9553_LED_FAST(i); + } + if (netdev->stats.tx_bytes != card->channel[i].prev_tx_bytes) { + card->channel[i].prev_tx_bytes = netdev->stats.tx_bytes; + new_led &= ~PCA9553_LED_MASK(i); + new_led |= PCA9553_LED_FAST(i); + } + } + + /* check if LS0 settings changed, only update i2c if so */ + peak_pciec_write_pca9553(card, 5, new_led); + + /* restart timer (except if no more configured channels) */ + if (up_count) + schedule_delayed_work(&card->led_work, HZ); +} + +/* set LEDs blinking state */ +static void peak_pciec_set_leds(struct peak_pciec_card *card, u8 led_mask, u8 s) +{ + u8 new_led = card->led_cache; + int i; + + /* first check what is to do */ + for (i = 0; i < card->chan_count; i++) + if (led_mask & PCA9553_LED(i)) { + new_led &= ~PCA9553_LED_MASK(i); + new_led |= PCA9553_LED_STATE(s, i); + } + + /* check if LS0 settings changed, only update i2c if so */ + peak_pciec_write_pca9553(card, 5, new_led); +} + +/* start one second delayed work to control LEDs */ +static void peak_pciec_start_led_work(struct peak_pciec_card *card) +{ + schedule_delayed_work(&card->led_work, HZ); +} + +/* stop LEDs delayed work */ +static void peak_pciec_stop_led_work(struct peak_pciec_card *card) +{ + cancel_delayed_work_sync(&card->led_work); +} + +/* initialize the PCA9553 4-bit I2C-bus LED chip */ +static int peak_pciec_init_leds(struct peak_pciec_card *card) +{ + int err; + + /* prescaler for frequency 0: "SLOW" = 1 Hz = "44" */ + err = peak_pciec_write_pca9553(card, 1, 44 / 1); + if (err) + return err; + + /* duty cycle 0: 50% */ + err = peak_pciec_write_pca9553(card, 2, 0x80); + if (err) + return err; + + /* prescaler for frequency 1: "FAST" = 5 Hz */ + err = peak_pciec_write_pca9553(card, 3, 44 / 5); + if (err) + return err; + + /* duty cycle 1: 50% */ + err = peak_pciec_write_pca9553(card, 4, 0x80); + if (err) + return err; + + /* switch LEDs to initial state */ + return peak_pciec_write_pca9553(card, 5, PCA9553_LS0_INIT); +} + +/* restore LEDs state to off peak_pciec_leds_exit */ +static void peak_pciec_leds_exit(struct peak_pciec_card *card) +{ + /* switch LEDs to off */ + peak_pciec_write_pca9553(card, 5, PCA9553_LED_OFF_ALL); +} + +/* normal write sja1000 register method overloaded to catch when controller + * is started or stopped, to control leds + */ +static void peak_pciec_write_reg(const struct sja1000_priv *priv, + int port, u8 val) +{ + struct peak_pci_chan *chan = priv->priv; + struct peak_pciec_card *card = chan->pciec_card; + int c = (priv->reg_base - card->reg_base) / PEAK_PCI_CHAN_SIZE; + + /* sja1000 register changes control the leds state */ + if (port == SJA1000_MOD) + switch (val) { + case MOD_RM: + /* Reset Mode: set led on */ + peak_pciec_set_leds(card, PCA9553_LED(c), PCA9553_ON); + break; + case 0x00: + /* Normal Mode: led slow blinking and start led timer */ + peak_pciec_set_leds(card, PCA9553_LED(c), PCA9553_SLOW); + peak_pciec_start_led_work(card); + break; + default: + break; + } + + /* call base function */ + peak_pci_write_reg(priv, port, val); +} + +static const struct i2c_algo_bit_data peak_pciec_i2c_bit_ops = { + .setsda = pita_setsda, + .setscl = pita_setscl, + .getsda = pita_getsda, + .getscl = pita_getscl, + .udelay = 10, + .timeout = HZ, +}; + +static int peak_pciec_probe(struct pci_dev *pdev, struct net_device *dev) +{ + struct sja1000_priv *priv = netdev_priv(dev); + struct peak_pci_chan *chan = priv->priv; + struct peak_pciec_card *card; + int err; + + /* copy i2c object address from 1st channel */ + if (chan->prev_dev) { + struct sja1000_priv *prev_priv = netdev_priv(chan->prev_dev); + struct peak_pci_chan *prev_chan = prev_priv->priv; + + card = prev_chan->pciec_card; + if (!card) + return -ENODEV; + + /* channel is the first one: do the init part */ + } else { + /* create the bit banging I2C adapter structure */ + card = kzalloc(sizeof(*card), GFP_KERNEL); + if (!card) + return -ENOMEM; + + card->cfg_base = chan->cfg_base; + card->reg_base = priv->reg_base; + + card->led_chip.owner = THIS_MODULE; + card->led_chip.dev.parent = &pdev->dev; + card->led_chip.algo_data = &card->i2c_bit; + strncpy(card->led_chip.name, "peak_i2c", + sizeof(card->led_chip.name)); + + card->i2c_bit = peak_pciec_i2c_bit_ops; + card->i2c_bit.udelay = 10; + card->i2c_bit.timeout = HZ; + card->i2c_bit.data = card; + + peak_pciec_init_pita_gpio(card); + + err = i2c_bit_add_bus(&card->led_chip); + if (err) { + dev_err(&pdev->dev, "i2c init failed\n"); + goto pciec_init_err_1; + } + + err = peak_pciec_init_leds(card); + if (err) { + dev_err(&pdev->dev, "leds hardware init failed\n"); + goto pciec_init_err_2; + } + + INIT_DELAYED_WORK(&card->led_work, peak_pciec_led_work); + /* PCAN-ExpressCard needs its own callback for leds */ + priv->write_reg = peak_pciec_write_reg; + } + + chan->pciec_card = card; + card->channel[card->chan_count++].netdev = dev; + + return 0; + +pciec_init_err_2: + i2c_del_adapter(&card->led_chip); + +pciec_init_err_1: + peak_pciec_init_pita_gpio(card); + kfree(card); + + return err; +} + +static void peak_pciec_remove(struct peak_pciec_card *card) +{ + peak_pciec_stop_led_work(card); + peak_pciec_leds_exit(card); + i2c_del_adapter(&card->led_chip); + peak_pciec_init_pita_gpio(card); + kfree(card); +} + +#else /* CONFIG_CAN_PEAK_PCIEC */ + +/* Placebo functions when PCAN-ExpressCard support is not selected */ +static inline int peak_pciec_probe(struct pci_dev *pdev, struct net_device *dev) +{ + return -ENODEV; +} + +static inline void peak_pciec_remove(struct peak_pciec_card *card) +{ +} +#endif /* CONFIG_CAN_PEAK_PCIEC */ + +static u8 peak_pci_read_reg(const struct sja1000_priv *priv, int port) +{ + return readb(priv->reg_base + (port << 2)); +} + +static void peak_pci_write_reg(const struct sja1000_priv *priv, + int port, u8 val) +{ + writeb(val, priv->reg_base + (port << 2)); +} + +static void peak_pci_post_irq(const struct sja1000_priv *priv) +{ + struct peak_pci_chan *chan = priv->priv; + u16 icr; + + /* Select and clear in PITA stored interrupt */ + icr = readw(chan->cfg_base + PITA_ICR); + if (icr & chan->icr_mask) + writew(chan->icr_mask, chan->cfg_base + PITA_ICR); +} + +static int peak_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + struct sja1000_priv *priv; + struct peak_pci_chan *chan; + struct net_device *dev, *prev_dev; + void __iomem *cfg_base, *reg_base; + u16 sub_sys_id, icr; + int i, err, channels; + char fw_str[14] = ""; + + err = pci_enable_device(pdev); + if (err) + return err; + + err = pci_request_regions(pdev, DRV_NAME); + if (err) + goto failure_disable_pci; + + err = pci_read_config_word(pdev, 0x2e, &sub_sys_id); + if (err) + goto failure_release_regions; + + dev_dbg(&pdev->dev, "probing device %04x:%04x:%04x\n", + pdev->vendor, pdev->device, sub_sys_id); + + err = pci_write_config_word(pdev, 0x44, 0); + if (err) + goto failure_release_regions; + + if (sub_sys_id >= 12) + channels = 4; + else if (sub_sys_id >= 10) + channels = 3; + else if (sub_sys_id >= 4) + channels = 2; + else + channels = 1; + + cfg_base = pci_iomap(pdev, 0, PEAK_PCI_CFG_SIZE); + if (!cfg_base) { + dev_err(&pdev->dev, "failed to map PCI resource #0\n"); + err = -ENOMEM; + goto failure_release_regions; + } + + reg_base = pci_iomap(pdev, 1, PEAK_PCI_CHAN_SIZE * channels); + if (!reg_base) { + dev_err(&pdev->dev, "failed to map PCI resource #1\n"); + err = -ENOMEM; + goto failure_unmap_cfg_base; + } + + /* Set GPIO control register */ + writew(0x0005, cfg_base + PITA_GPIOICR + 2); + /* Enable all channels of this card */ + writeb(0x00, cfg_base + PITA_GPIOICR); + /* Toggle reset */ + writeb(0x05, cfg_base + PITA_MISC + 3); + usleep_range(5000, 6000); + /* Leave parport mux mode */ + writeb(0x04, cfg_base + PITA_MISC + 3); + + /* FPGA equipped card if not 0 */ + if (readl(cfg_base + PEAK_VER_REG1)) { + /* FPGA card: display version of the running firmware */ + u32 fw_ver = readl(cfg_base + PEAK_VER_REG2); + + snprintf(fw_str, sizeof(fw_str), " FW v%u.%u.%u", + (fw_ver >> 12) & 0xf, + (fw_ver >> 8) & 0xf, + (fw_ver >> 4) & 0xf); + } + + /* Display commercial name (and, eventually, FW version) of the card */ + dev_info(&pdev->dev, "%ux CAN %s%s\n", + channels, (const char *)ent->driver_data, fw_str); + + icr = readw(cfg_base + PITA_ICR + 2); + + for (i = 0; i < channels; i++) { + dev = alloc_sja1000dev(sizeof(struct peak_pci_chan)); + if (!dev) { + err = -ENOMEM; + goto failure_remove_channels; + } + + priv = netdev_priv(dev); + chan = priv->priv; + + chan->cfg_base = cfg_base; + priv->reg_base = reg_base + i * PEAK_PCI_CHAN_SIZE; + + priv->read_reg = peak_pci_read_reg; + priv->write_reg = peak_pci_write_reg; + priv->post_irq = peak_pci_post_irq; + + priv->can.clock.freq = PEAK_PCI_CAN_CLOCK; + priv->ocr = PEAK_PCI_OCR; + priv->cdr = PEAK_PCI_CDR; + /* Neither a slave nor a single device distributes the clock */ + if (channels == 1 || i > 0) + priv->cdr |= CDR_CLK_OFF; + + /* Setup interrupt handling */ + priv->irq_flags = IRQF_SHARED; + dev->irq = pdev->irq; + + chan->icr_mask = peak_pci_icr_masks[i]; + icr |= chan->icr_mask; + + SET_NETDEV_DEV(dev, &pdev->dev); + dev->dev_id = i; + + /* Create chain of SJA1000 devices */ + chan->prev_dev = pci_get_drvdata(pdev); + pci_set_drvdata(pdev, dev); + + /* PCAN-ExpressCard needs some additional i2c init. + * This must be done *before* register_sja1000dev() but + * *after* devices linkage + */ + if (pdev->device == PEAK_PCIEC_DEVICE_ID || + pdev->device == PEAK_PCIEC34_DEVICE_ID) { + err = peak_pciec_probe(pdev, dev); + if (err) { + dev_err(&pdev->dev, + "failed to probe device (err %d)\n", + err); + goto failure_free_dev; + } + } + + err = register_sja1000dev(dev); + if (err) { + dev_err(&pdev->dev, "failed to register device\n"); + goto failure_free_dev; + } + + dev_info(&pdev->dev, + "%s at reg_base=0x%p cfg_base=0x%p irq=%d\n", + dev->name, priv->reg_base, chan->cfg_base, dev->irq); + } + + /* Enable interrupts */ + writew(icr, cfg_base + PITA_ICR + 2); + + return 0; + +failure_free_dev: + pci_set_drvdata(pdev, chan->prev_dev); + free_sja1000dev(dev); + +failure_remove_channels: + /* Disable interrupts */ + writew(0x0, cfg_base + PITA_ICR + 2); + + chan = NULL; + for (dev = pci_get_drvdata(pdev); dev; dev = prev_dev) { + priv = netdev_priv(dev); + chan = priv->priv; + prev_dev = chan->prev_dev; + + unregister_sja1000dev(dev); + free_sja1000dev(dev); + } + + /* free any PCIeC resources too */ + if (chan && chan->pciec_card) + peak_pciec_remove(chan->pciec_card); + + pci_iounmap(pdev, reg_base); + +failure_unmap_cfg_base: + pci_iounmap(pdev, cfg_base); + +failure_release_regions: + pci_release_regions(pdev); + +failure_disable_pci: + pci_disable_device(pdev); + + /* pci_xxx_config_word() return positive PCIBIOS_xxx error codes while + * the probe() function must return a negative errno in case of failure + * (err is unchanged if negative) + */ + return pcibios_err_to_errno(err); +} + +static void peak_pci_remove(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); /* Last device */ + struct sja1000_priv *priv = netdev_priv(dev); + struct peak_pci_chan *chan = priv->priv; + void __iomem *cfg_base = chan->cfg_base; + void __iomem *reg_base = priv->reg_base; + + /* Disable interrupts */ + writew(0x0, cfg_base + PITA_ICR + 2); + + /* Loop over all registered devices */ + while (1) { + struct net_device *prev_dev = chan->prev_dev; + + dev_info(&pdev->dev, "removing device %s\n", dev->name); + /* do that only for first channel */ + if (!prev_dev && chan->pciec_card) + peak_pciec_remove(chan->pciec_card); + unregister_sja1000dev(dev); + free_sja1000dev(dev); + dev = prev_dev; + + if (!dev) + break; + priv = netdev_priv(dev); + chan = priv->priv; + } + + pci_iounmap(pdev, reg_base); + pci_iounmap(pdev, cfg_base); + pci_release_regions(pdev); + pci_disable_device(pdev); +} + +static struct pci_driver peak_pci_driver = { + .name = DRV_NAME, + .id_table = peak_pci_tbl, + .probe = peak_pci_probe, + .remove = peak_pci_remove, +}; + +module_pci_driver(peak_pci_driver); diff --git a/drivers/net/can/sja1000/peak_pcmcia.c b/drivers/net/can/sja1000/peak_pcmcia.c new file mode 100644 index 0000000000..ebd5941c3f --- /dev/null +++ b/drivers/net/can/sja1000/peak_pcmcia.c @@ -0,0 +1,733 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2010-2012 Stephane Grosjean + * + * CAN driver for PEAK-System PCAN-PC Card + * Derived from the PCAN project file driver/src/pcan_pccard.c + * Copyright (C) 2006-2010 PEAK System-Technik GmbH + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "sja1000.h" + +MODULE_AUTHOR("Stephane Grosjean "); +MODULE_DESCRIPTION("CAN driver for PEAK-System PCAN-PC Cards"); +MODULE_LICENSE("GPL v2"); + +/* PEAK-System PCMCIA driver name */ +#define PCC_NAME "peak_pcmcia" + +#define PCC_CHAN_MAX 2 + +#define PCC_CAN_CLOCK (16000000 / 2) + +#define PCC_MANF_ID 0x0377 +#define PCC_CARD_ID 0x0001 + +#define PCC_CHAN_SIZE 0x20 +#define PCC_CHAN_OFF(c) ((c) * PCC_CHAN_SIZE) +#define PCC_COMN_OFF (PCC_CHAN_OFF(PCC_CHAN_MAX)) +#define PCC_COMN_SIZE 0x40 + +/* common area registers */ +#define PCC_CCR 0x00 +#define PCC_CSR 0x02 +#define PCC_CPR 0x04 +#define PCC_SPI_DIR 0x06 +#define PCC_SPI_DOR 0x08 +#define PCC_SPI_ADR 0x0a +#define PCC_SPI_IR 0x0c +#define PCC_FW_MAJOR 0x10 +#define PCC_FW_MINOR 0x12 + +/* CCR bits */ +#define PCC_CCR_CLK_16 0x00 +#define PCC_CCR_CLK_10 0x01 +#define PCC_CCR_CLK_21 0x02 +#define PCC_CCR_CLK_8 0x03 +#define PCC_CCR_CLK_MASK PCC_CCR_CLK_8 + +#define PCC_CCR_RST_CHAN(c) (0x01 << ((c) + 2)) +#define PCC_CCR_RST_ALL (PCC_CCR_RST_CHAN(0) | PCC_CCR_RST_CHAN(1)) +#define PCC_CCR_RST_MASK PCC_CCR_RST_ALL + +/* led selection bits */ +#define PCC_LED(c) (1 << (c)) +#define PCC_LED_ALL (PCC_LED(0) | PCC_LED(1)) + +/* led state value */ +#define PCC_LED_ON 0x00 +#define PCC_LED_FAST 0x01 +#define PCC_LED_SLOW 0x02 +#define PCC_LED_OFF 0x03 + +#define PCC_CCR_LED_CHAN(s, c) ((s) << (((c) + 2) << 1)) + +#define PCC_CCR_LED_ON_CHAN(c) PCC_CCR_LED_CHAN(PCC_LED_ON, c) +#define PCC_CCR_LED_FAST_CHAN(c) PCC_CCR_LED_CHAN(PCC_LED_FAST, c) +#define PCC_CCR_LED_SLOW_CHAN(c) PCC_CCR_LED_CHAN(PCC_LED_SLOW, c) +#define PCC_CCR_LED_OFF_CHAN(c) PCC_CCR_LED_CHAN(PCC_LED_OFF, c) +#define PCC_CCR_LED_MASK_CHAN(c) PCC_CCR_LED_OFF_CHAN(c) +#define PCC_CCR_LED_OFF_ALL (PCC_CCR_LED_OFF_CHAN(0) | \ + PCC_CCR_LED_OFF_CHAN(1)) +#define PCC_CCR_LED_MASK PCC_CCR_LED_OFF_ALL + +#define PCC_CCR_INIT (PCC_CCR_CLK_16 | PCC_CCR_RST_ALL | PCC_CCR_LED_OFF_ALL) + +/* CSR bits */ +#define PCC_CSR_SPI_BUSY 0x04 + +/* time waiting for SPI busy (prevent from infinite loop) */ +#define PCC_SPI_MAX_BUSY_WAIT_MS 3 + +/* max count of reading the SPI status register waiting for a change */ +/* (prevent from infinite loop) */ +#define PCC_WRITE_MAX_LOOP 1000 + +/* max nb of int handled by that isr in one shot (prevent from infinite loop) */ +#define PCC_ISR_MAX_LOOP 10 + +/* EEPROM chip instruction set */ +/* note: EEPROM Read/Write instructions include A8 bit */ +#define PCC_EEP_WRITE(a) (0x02 | (((a) & 0x100) >> 5)) +#define PCC_EEP_READ(a) (0x03 | (((a) & 0x100) >> 5)) +#define PCC_EEP_WRDI 0x04 /* EEPROM Write Disable */ +#define PCC_EEP_RDSR 0x05 /* EEPROM Read Status Register */ +#define PCC_EEP_WREN 0x06 /* EEPROM Write Enable */ + +/* EEPROM Status Register bits */ +#define PCC_EEP_SR_WEN 0x02 /* EEPROM SR Write Enable bit */ +#define PCC_EEP_SR_WIP 0x01 /* EEPROM SR Write In Progress bit */ + +/* + * The board configuration is probably following: + * RX1 is connected to ground. + * TX1 is not connected. + * CLKO is not connected. + * Setting the OCR register to 0xDA is a good idea. + * This means normal output mode, push-pull and the correct polarity. + */ +#define PCC_OCR (OCR_TX0_PUSHPULL | OCR_TX1_PUSHPULL) + +/* + * In the CDR register, you should set CBP to 1. + * You will probably also want to set the clock divider value to 7 + * (meaning direct oscillator output) because the second SJA1000 chip + * is driven by the first one CLKOUT output. + */ +#define PCC_CDR (CDR_CBP | CDR_CLKOUT_MASK) + +struct pcan_channel { + struct net_device *netdev; + unsigned long prev_rx_bytes; + unsigned long prev_tx_bytes; +}; + +/* PCAN-PC Card private structure */ +struct pcan_pccard { + struct pcmcia_device *pdev; + int chan_count; + struct pcan_channel channel[PCC_CHAN_MAX]; + u8 ccr; + u8 fw_major; + u8 fw_minor; + void __iomem *ioport_addr; + struct timer_list led_timer; +}; + +static struct pcmcia_device_id pcan_table[] = { + PCMCIA_DEVICE_MANF_CARD(PCC_MANF_ID, PCC_CARD_ID), + PCMCIA_DEVICE_NULL, +}; + +MODULE_DEVICE_TABLE(pcmcia, pcan_table); + +static void pcan_set_leds(struct pcan_pccard *card, u8 mask, u8 state); + +/* + * start timer which controls leds state + */ +static void pcan_start_led_timer(struct pcan_pccard *card) +{ + if (!timer_pending(&card->led_timer)) + mod_timer(&card->led_timer, jiffies + HZ); +} + +/* + * stop the timer which controls leds state + */ +static void pcan_stop_led_timer(struct pcan_pccard *card) +{ + del_timer_sync(&card->led_timer); +} + +/* + * read a sja1000 register + */ +static u8 pcan_read_canreg(const struct sja1000_priv *priv, int port) +{ + return ioread8(priv->reg_base + port); +} + +/* + * write a sja1000 register + */ +static void pcan_write_canreg(const struct sja1000_priv *priv, int port, u8 v) +{ + struct pcan_pccard *card = priv->priv; + int c = (priv->reg_base - card->ioport_addr) / PCC_CHAN_SIZE; + + /* sja1000 register changes control the leds state */ + if (port == SJA1000_MOD) + switch (v) { + case MOD_RM: + /* Reset Mode: set led on */ + pcan_set_leds(card, PCC_LED(c), PCC_LED_ON); + break; + case 0x00: + /* Normal Mode: led slow blinking and start led timer */ + pcan_set_leds(card, PCC_LED(c), PCC_LED_SLOW); + pcan_start_led_timer(card); + break; + default: + break; + } + + iowrite8(v, priv->reg_base + port); +} + +/* + * read a register from the common area + */ +static u8 pcan_read_reg(struct pcan_pccard *card, int port) +{ + return ioread8(card->ioport_addr + PCC_COMN_OFF + port); +} + +/* + * write a register into the common area + */ +static void pcan_write_reg(struct pcan_pccard *card, int port, u8 v) +{ + /* cache ccr value */ + if (port == PCC_CCR) { + if (card->ccr == v) + return; + card->ccr = v; + } + + iowrite8(v, card->ioport_addr + PCC_COMN_OFF + port); +} + +/* + * check whether the card is present by checking its fw version numbers + * against values read at probing time. + */ +static inline int pcan_pccard_present(struct pcan_pccard *card) +{ + return ((pcan_read_reg(card, PCC_FW_MAJOR) == card->fw_major) && + (pcan_read_reg(card, PCC_FW_MINOR) == card->fw_minor)); +} + +/* + * wait for SPI engine while it is busy + */ +static int pcan_wait_spi_busy(struct pcan_pccard *card) +{ + unsigned long timeout = jiffies + + msecs_to_jiffies(PCC_SPI_MAX_BUSY_WAIT_MS) + 1; + + /* be sure to read status at least once after sleeping */ + while (pcan_read_reg(card, PCC_CSR) & PCC_CSR_SPI_BUSY) { + if (time_after(jiffies, timeout)) + return -EBUSY; + schedule(); + } + + return 0; +} + +/* + * write data in device eeprom + */ +static int pcan_write_eeprom(struct pcan_pccard *card, u16 addr, u8 v) +{ + u8 status; + int err, i; + + /* write instruction enabling write */ + pcan_write_reg(card, PCC_SPI_IR, PCC_EEP_WREN); + err = pcan_wait_spi_busy(card); + if (err) + goto we_spi_err; + + /* wait until write enabled */ + for (i = 0; i < PCC_WRITE_MAX_LOOP; i++) { + /* write instruction reading the status register */ + pcan_write_reg(card, PCC_SPI_IR, PCC_EEP_RDSR); + err = pcan_wait_spi_busy(card); + if (err) + goto we_spi_err; + + /* get status register value and check write enable bit */ + status = pcan_read_reg(card, PCC_SPI_DIR); + if (status & PCC_EEP_SR_WEN) + break; + } + + if (i >= PCC_WRITE_MAX_LOOP) { + dev_err(&card->pdev->dev, + "stop waiting to be allowed to write in eeprom\n"); + return -EIO; + } + + /* set address and data */ + pcan_write_reg(card, PCC_SPI_ADR, addr & 0xff); + pcan_write_reg(card, PCC_SPI_DOR, v); + + /* + * write instruction with bit[3] set according to address value: + * if addr refers to upper half of the memory array: bit[3] = 1 + */ + pcan_write_reg(card, PCC_SPI_IR, PCC_EEP_WRITE(addr)); + err = pcan_wait_spi_busy(card); + if (err) + goto we_spi_err; + + /* wait while write in progress */ + for (i = 0; i < PCC_WRITE_MAX_LOOP; i++) { + /* write instruction reading the status register */ + pcan_write_reg(card, PCC_SPI_IR, PCC_EEP_RDSR); + err = pcan_wait_spi_busy(card); + if (err) + goto we_spi_err; + + /* get status register value and check write in progress bit */ + status = pcan_read_reg(card, PCC_SPI_DIR); + if (!(status & PCC_EEP_SR_WIP)) + break; + } + + if (i >= PCC_WRITE_MAX_LOOP) { + dev_err(&card->pdev->dev, + "stop waiting for write in eeprom to complete\n"); + return -EIO; + } + + /* write instruction disabling write */ + pcan_write_reg(card, PCC_SPI_IR, PCC_EEP_WRDI); + err = pcan_wait_spi_busy(card); + if (err) + goto we_spi_err; + + return 0; + +we_spi_err: + dev_err(&card->pdev->dev, + "stop waiting (spi engine always busy) err %d\n", err); + + return err; +} + +static void pcan_set_leds(struct pcan_pccard *card, u8 led_mask, u8 state) +{ + u8 ccr = card->ccr; + int i; + + for (i = 0; i < card->chan_count; i++) + if (led_mask & PCC_LED(i)) { + /* clear corresponding led bits in ccr */ + ccr &= ~PCC_CCR_LED_MASK_CHAN(i); + /* then set new bits */ + ccr |= PCC_CCR_LED_CHAN(state, i); + } + + /* real write only if something has changed in ccr */ + pcan_write_reg(card, PCC_CCR, ccr); +} + +/* + * enable/disable CAN connectors power + */ +static inline void pcan_set_can_power(struct pcan_pccard *card, int onoff) +{ + int err; + + err = pcan_write_eeprom(card, 0, !!onoff); + if (err) + dev_err(&card->pdev->dev, + "failed setting power %s to can connectors (err %d)\n", + (onoff) ? "on" : "off", err); +} + +/* + * set leds state according to channel activity + */ +static void pcan_led_timer(struct timer_list *t) +{ + struct pcan_pccard *card = from_timer(card, t, led_timer); + struct net_device *netdev; + int i, up_count = 0; + u8 ccr; + + ccr = card->ccr; + for (i = 0; i < card->chan_count; i++) { + /* default is: not configured */ + ccr &= ~PCC_CCR_LED_MASK_CHAN(i); + ccr |= PCC_CCR_LED_ON_CHAN(i); + + netdev = card->channel[i].netdev; + if (!netdev || !(netdev->flags & IFF_UP)) + continue; + + up_count++; + + /* no activity (but configured) */ + ccr &= ~PCC_CCR_LED_MASK_CHAN(i); + ccr |= PCC_CCR_LED_SLOW_CHAN(i); + + /* if bytes counters changed, set fast blinking led */ + if (netdev->stats.rx_bytes != card->channel[i].prev_rx_bytes) { + card->channel[i].prev_rx_bytes = netdev->stats.rx_bytes; + ccr &= ~PCC_CCR_LED_MASK_CHAN(i); + ccr |= PCC_CCR_LED_FAST_CHAN(i); + } + if (netdev->stats.tx_bytes != card->channel[i].prev_tx_bytes) { + card->channel[i].prev_tx_bytes = netdev->stats.tx_bytes; + ccr &= ~PCC_CCR_LED_MASK_CHAN(i); + ccr |= PCC_CCR_LED_FAST_CHAN(i); + } + } + + /* write the new leds state */ + pcan_write_reg(card, PCC_CCR, ccr); + + /* restart timer (except if no more configured channels) */ + if (up_count) + mod_timer(&card->led_timer, jiffies + HZ); +} + +/* + * interrupt service routine + */ +static irqreturn_t pcan_isr(int irq, void *dev_id) +{ + struct pcan_pccard *card = dev_id; + int irq_handled; + + /* prevent from infinite loop */ + for (irq_handled = 0; irq_handled < PCC_ISR_MAX_LOOP; irq_handled++) { + /* handle shared interrupt and next loop */ + int nothing_to_handle = 1; + int i; + + /* check interrupt for each channel */ + for (i = 0; i < card->chan_count; i++) { + struct net_device *netdev; + + /* + * check whether the card is present before calling + * sja1000_interrupt() to speed up hotplug detection + */ + if (!pcan_pccard_present(card)) { + /* card unplugged during isr */ + return IRQ_NONE; + } + + /* + * should check whether all or SJA1000_MAX_IRQ + * interrupts have been handled: loop again to be sure. + */ + netdev = card->channel[i].netdev; + if (netdev && + sja1000_interrupt(irq, netdev) == IRQ_HANDLED) + nothing_to_handle = 0; + } + + if (nothing_to_handle) + break; + } + + return (irq_handled) ? IRQ_HANDLED : IRQ_NONE; +} + +/* + * free all resources used by the channels and switch off leds and can power + */ +static void pcan_free_channels(struct pcan_pccard *card) +{ + int i; + u8 led_mask = 0; + + for (i = 0; i < card->chan_count; i++) { + struct net_device *netdev; + char name[IFNAMSIZ]; + + led_mask |= PCC_LED(i); + + netdev = card->channel[i].netdev; + if (!netdev) + continue; + + strscpy(name, netdev->name, IFNAMSIZ); + + unregister_sja1000dev(netdev); + + free_sja1000dev(netdev); + + dev_info(&card->pdev->dev, "%s removed\n", name); + } + + /* do it only if device not removed */ + if (pcan_pccard_present(card)) { + pcan_set_leds(card, led_mask, PCC_LED_OFF); + pcan_set_can_power(card, 0); + } +} + +/* + * check if a CAN controller is present at the specified location + */ +static inline int pcan_channel_present(struct sja1000_priv *priv) +{ + /* make sure SJA1000 is in reset mode */ + pcan_write_canreg(priv, SJA1000_MOD, 1); + pcan_write_canreg(priv, SJA1000_CDR, CDR_PELICAN); + + /* read reset-values */ + if (pcan_read_canreg(priv, SJA1000_CDR) == CDR_PELICAN) + return 1; + + return 0; +} + +static int pcan_add_channels(struct pcan_pccard *card) +{ + struct pcmcia_device *pdev = card->pdev; + int i, err = 0; + u8 ccr = PCC_CCR_INIT; + + /* init common registers (reset channels and leds off) */ + card->ccr = ~ccr; + pcan_write_reg(card, PCC_CCR, ccr); + + /* wait 2ms before unresetting channels */ + usleep_range(2000, 3000); + + ccr &= ~PCC_CCR_RST_ALL; + pcan_write_reg(card, PCC_CCR, ccr); + + /* create one network device per channel detected */ + for (i = 0; i < ARRAY_SIZE(card->channel); i++) { + struct net_device *netdev; + struct sja1000_priv *priv; + + netdev = alloc_sja1000dev(0); + if (!netdev) { + err = -ENOMEM; + break; + } + + /* update linkages */ + priv = netdev_priv(netdev); + priv->priv = card; + SET_NETDEV_DEV(netdev, &pdev->dev); + netdev->dev_id = i; + + priv->irq_flags = IRQF_SHARED; + netdev->irq = pdev->irq; + priv->reg_base = card->ioport_addr + PCC_CHAN_OFF(i); + + /* check if channel is present */ + if (!pcan_channel_present(priv)) { + dev_err(&pdev->dev, "channel %d not present\n", i); + free_sja1000dev(netdev); + continue; + } + + priv->read_reg = pcan_read_canreg; + priv->write_reg = pcan_write_canreg; + priv->can.clock.freq = PCC_CAN_CLOCK; + priv->ocr = PCC_OCR; + priv->cdr = PCC_CDR; + + /* Neither a slave device distributes the clock */ + if (i > 0) + priv->cdr |= CDR_CLK_OFF; + + priv->flags |= SJA1000_CUSTOM_IRQ_HANDLER; + + /* register SJA1000 device */ + err = register_sja1000dev(netdev); + if (err) { + free_sja1000dev(netdev); + continue; + } + + card->channel[i].netdev = netdev; + card->chan_count++; + + /* set corresponding led on in the new ccr */ + ccr &= ~PCC_CCR_LED_OFF_CHAN(i); + + dev_info(&pdev->dev, + "%s on channel %d at 0x%p irq %d\n", + netdev->name, i, priv->reg_base, pdev->irq); + } + + /* write new ccr (change leds state) */ + pcan_write_reg(card, PCC_CCR, ccr); + + return err; +} + +static int pcan_conf_check(struct pcmcia_device *pdev, void *priv_data) +{ + pdev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; /* only */ + pdev->io_lines = 10; + + /* This reserves IO space but doesn't actually enable it */ + return pcmcia_request_io(pdev); +} + +/* + * free all resources used by the device + */ +static void pcan_free(struct pcmcia_device *pdev) +{ + struct pcan_pccard *card = pdev->priv; + + if (!card) + return; + + free_irq(pdev->irq, card); + pcan_stop_led_timer(card); + + pcan_free_channels(card); + + ioport_unmap(card->ioport_addr); + + kfree(card); + pdev->priv = NULL; +} + +/* + * setup PCMCIA socket and probe for PEAK-System PC-CARD + */ +static int pcan_probe(struct pcmcia_device *pdev) +{ + struct pcan_pccard *card; + int err; + + pdev->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; + + err = pcmcia_loop_config(pdev, pcan_conf_check, NULL); + if (err) { + dev_err(&pdev->dev, "pcmcia_loop_config() error %d\n", err); + goto probe_err_1; + } + + if (!pdev->irq) { + dev_err(&pdev->dev, "no irq assigned\n"); + err = -ENODEV; + goto probe_err_1; + } + + err = pcmcia_enable_device(pdev); + if (err) { + dev_err(&pdev->dev, "pcmcia_enable_device failed err=%d\n", + err); + goto probe_err_1; + } + + card = kzalloc(sizeof(struct pcan_pccard), GFP_KERNEL); + if (!card) { + err = -ENOMEM; + goto probe_err_2; + } + + card->pdev = pdev; + pdev->priv = card; + + /* sja1000 api uses iomem */ + card->ioport_addr = ioport_map(pdev->resource[0]->start, + resource_size(pdev->resource[0])); + if (!card->ioport_addr) { + dev_err(&pdev->dev, "couldn't map io port into io memory\n"); + err = -ENOMEM; + goto probe_err_3; + } + card->fw_major = pcan_read_reg(card, PCC_FW_MAJOR); + card->fw_minor = pcan_read_reg(card, PCC_FW_MINOR); + + /* display board name and firmware version */ + dev_info(&pdev->dev, "PEAK-System pcmcia card %s fw %d.%d\n", + pdev->prod_id[1] ? pdev->prod_id[1] : "PCAN-PC Card", + card->fw_major, card->fw_minor); + + /* detect available channels */ + pcan_add_channels(card); + if (!card->chan_count) { + err = -ENOMEM; + goto probe_err_4; + } + + /* init the timer which controls the leds */ + timer_setup(&card->led_timer, pcan_led_timer, 0); + + /* request the given irq */ + err = request_irq(pdev->irq, &pcan_isr, IRQF_SHARED, PCC_NAME, card); + if (err) { + dev_err(&pdev->dev, "couldn't request irq%d\n", pdev->irq); + goto probe_err_5; + } + + /* power on the connectors */ + pcan_set_can_power(card, 1); + + return 0; + +probe_err_5: + /* unregister can devices from network */ + pcan_free_channels(card); + +probe_err_4: + ioport_unmap(card->ioport_addr); + +probe_err_3: + kfree(card); + pdev->priv = NULL; + +probe_err_2: + pcmcia_disable_device(pdev); + +probe_err_1: + return err; +} + +/* + * release claimed resources + */ +static void pcan_remove(struct pcmcia_device *pdev) +{ + pcan_free(pdev); + pcmcia_disable_device(pdev); +} + +static struct pcmcia_driver pcan_driver = { + .name = PCC_NAME, + .probe = pcan_probe, + .remove = pcan_remove, + .id_table = pcan_table, +}; +module_pcmcia_driver(pcan_driver); diff --git a/drivers/net/can/sja1000/plx_pci.c b/drivers/net/can/sja1000/plx_pci.c new file mode 100644 index 0000000000..5de1ebb0c6 --- /dev/null +++ b/drivers/net/can/sja1000/plx_pci.c @@ -0,0 +1,756 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2008-2010 Pavel Cheblakov + * + * Derived from the ems_pci.c driver: + * Copyright (C) 2007 Wolfgang Grandegger + * Copyright (C) 2008 Markus Plessing + * Copyright (C) 2008 Sebastian Haas + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "sja1000.h" + +#define DRV_NAME "sja1000_plx_pci" + +MODULE_AUTHOR("Pavel Cheblakov "); +MODULE_DESCRIPTION("Socket-CAN driver for PLX90xx PCI-bridge cards with " + "the SJA1000 chips"); +MODULE_LICENSE("GPL v2"); + +#define PLX_PCI_MAX_CHAN 2 + +struct plx_pci_card { + int channels; /* detected channels count */ + struct net_device *net_dev[PLX_PCI_MAX_CHAN]; + void __iomem *conf_addr; + + /* Pointer to device-dependent reset function */ + void (*reset_func)(struct pci_dev *pdev); +}; + +#define PLX_PCI_CAN_CLOCK (16000000 / 2) + +/* PLX9030/9050/9052 registers */ +#define PLX_INTCSR 0x4c /* Interrupt Control/Status */ +#define PLX_CNTRL 0x50 /* User I/O, Direct Slave Response, + * Serial EEPROM, and Initialization + * Control register + */ + +#define PLX_LINT1_EN 0x1 /* Local interrupt 1 enable */ +#define PLX_LINT1_POL (1 << 1) /* Local interrupt 1 polarity */ +#define PLX_LINT2_EN (1 << 3) /* Local interrupt 2 enable */ +#define PLX_LINT2_POL (1 << 4) /* Local interrupt 2 polarity */ +#define PLX_PCI_INT_EN (1 << 6) /* PCI Interrupt Enable */ +#define PLX_PCI_RESET (1 << 30) /* PCI Adapter Software Reset */ + +/* PLX9056 registers */ +#define PLX9056_INTCSR 0x68 /* Interrupt Control/Status */ +#define PLX9056_CNTRL 0x6c /* Control / Software Reset */ + +#define PLX9056_LINTI (1 << 11) +#define PLX9056_PCI_INT_EN (1 << 8) +#define PLX9056_PCI_RCR (1 << 29) /* Read Configuration Registers */ + +/* + * The board configuration is probably following: + * RX1 is connected to ground. + * TX1 is not connected. + * CLKO is not connected. + * Setting the OCR register to 0xDA is a good idea. + * This means normal output mode, push-pull and the correct polarity. + */ +#define PLX_PCI_OCR (OCR_TX0_PUSHPULL | OCR_TX1_PUSHPULL) + +/* OCR setting for ASEM Dual CAN raw */ +#define ASEM_PCI_OCR 0xfe + +/* + * In the CDR register, you should set CBP to 1. + * You will probably also want to set the clock divider value to 7 + * (meaning direct oscillator output) because the second SJA1000 chip + * is driven by the first one CLKOUT output. + */ +#define PLX_PCI_CDR (CDR_CBP | CDR_CLKOUT_MASK) + +/* SJA1000 Control Register in the BasicCAN Mode */ +#define REG_CR 0x00 + +/* States of some SJA1000 registers after hardware reset in the BasicCAN mode*/ +#define REG_CR_BASICCAN_INITIAL 0x21 +#define REG_CR_BASICCAN_INITIAL_MASK 0xa1 +#define REG_SR_BASICCAN_INITIAL 0x0c +#define REG_IR_BASICCAN_INITIAL 0xe0 + +/* States of some SJA1000 registers after hardware reset in the PeliCAN mode*/ +#define REG_MOD_PELICAN_INITIAL 0x01 +#define REG_SR_PELICAN_INITIAL 0x3c +#define REG_IR_PELICAN_INITIAL 0x00 + +#define ADLINK_PCI_VENDOR_ID 0x144A +#define ADLINK_PCI_DEVICE_ID 0x7841 + +#define ESD_PCI_SUB_SYS_ID_PCI200 0x0004 +#define ESD_PCI_SUB_SYS_ID_PCI266 0x0009 +#define ESD_PCI_SUB_SYS_ID_PMC266 0x000e +#define ESD_PCI_SUB_SYS_ID_CPCI200 0x010b +#define ESD_PCI_SUB_SYS_ID_PCIE2000 0x0200 +#define ESD_PCI_SUB_SYS_ID_PCI104200 0x0501 + +#define CAN200PCI_DEVICE_ID 0x9030 +#define CAN200PCI_VENDOR_ID 0x10b5 +#define CAN200PCI_SUB_DEVICE_ID 0x0301 +#define CAN200PCI_SUB_VENDOR_ID 0xe1c5 + +#define IXXAT_PCI_VENDOR_ID 0x10b5 +#define IXXAT_PCI_DEVICE_ID 0x9050 +#define IXXAT_PCI_SUB_SYS_ID 0x2540 + +#define MARATHON_PCI_DEVICE_ID 0x2715 +#define MARATHON_PCIE_DEVICE_ID 0x3432 + +#define TEWS_PCI_VENDOR_ID 0x1498 +#define TEWS_PCI_DEVICE_ID_TMPC810 0x032A + +#define CTI_PCI_VENDOR_ID 0x12c4 +#define CTI_PCI_DEVICE_ID_CRG001 0x0900 + +#define MOXA_PCI_VENDOR_ID 0x1393 +#define MOXA_PCI_DEVICE_ID 0x0100 + +#define ASEM_RAW_CAN_VENDOR_ID 0x10b5 +#define ASEM_RAW_CAN_DEVICE_ID 0x9030 +#define ASEM_RAW_CAN_SUB_VENDOR_ID 0x3000 +#define ASEM_RAW_CAN_SUB_DEVICE_ID 0x1001 +#define ASEM_RAW_CAN_SUB_DEVICE_ID_BIS 0x1002 +#define ASEM_RAW_CAN_RST_REGISTER 0x54 +#define ASEM_RAW_CAN_RST_MASK_CAN1 0x20 +#define ASEM_RAW_CAN_RST_MASK_CAN2 0x04 + +static void plx_pci_reset_common(struct pci_dev *pdev); +static void plx9056_pci_reset_common(struct pci_dev *pdev); +static void plx_pci_reset_marathon_pci(struct pci_dev *pdev); +static void plx_pci_reset_marathon_pcie(struct pci_dev *pdev); +static void plx_pci_reset_asem_dual_can_raw(struct pci_dev *pdev); + +struct plx_pci_channel_map { + u32 bar; + u32 offset; + u32 size; /* 0x00 - auto, e.g. length of entire bar */ +}; + +struct plx_pci_card_info { + const char *name; + int channel_count; + u32 can_clock; + u8 ocr; /* output control register */ + u8 cdr; /* clock divider register */ + + /* Parameters for mapping local configuration space */ + struct plx_pci_channel_map conf_map; + + /* Parameters for mapping the SJA1000 chips */ + struct plx_pci_channel_map chan_map_tbl[PLX_PCI_MAX_CHAN]; + + /* Pointer to device-dependent reset function */ + void (*reset_func)(struct pci_dev *pdev); +}; + +static struct plx_pci_card_info plx_pci_card_info_adlink = { + "Adlink PCI-7841/cPCI-7841", 2, + PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR, + {1, 0x00, 0x00}, { {2, 0x00, 0x80}, {2, 0x80, 0x80} }, + &plx_pci_reset_common + /* based on PLX9052 */ +}; + +static struct plx_pci_card_info plx_pci_card_info_adlink_se = { + "Adlink PCI-7841/cPCI-7841 SE", 2, + PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR, + {0, 0x00, 0x00}, { {2, 0x00, 0x80}, {2, 0x80, 0x80} }, + &plx_pci_reset_common + /* based on PLX9052 */ +}; + +static struct plx_pci_card_info plx_pci_card_info_esd200 = { + "esd CAN-PCI/CPCI/PCI104/200", 2, + PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR, + {0, 0x00, 0x00}, { {2, 0x00, 0x80}, {2, 0x100, 0x80} }, + &plx_pci_reset_common + /* based on PLX9030/9050 */ +}; + +static struct plx_pci_card_info plx_pci_card_info_esd266 = { + "esd CAN-PCI/PMC/266", 2, + PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR, + {0, 0x00, 0x00}, { {2, 0x00, 0x80}, {2, 0x100, 0x80} }, + &plx9056_pci_reset_common + /* based on PLX9056 */ +}; + +static struct plx_pci_card_info plx_pci_card_info_esd2000 = { + "esd CAN-PCIe/2000", 2, + PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR, + {0, 0x00, 0x00}, { {2, 0x00, 0x80}, {2, 0x100, 0x80} }, + &plx9056_pci_reset_common + /* based on PEX8311 */ +}; + +static struct plx_pci_card_info plx_pci_card_info_ixxat = { + "IXXAT PC-I 04/PCI", 2, + PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR, + {0, 0x00, 0x00}, { {2, 0x00, 0x80}, {2, 0x200, 0x80} }, + &plx_pci_reset_common + /* based on PLX9050 */ +}; + +static struct plx_pci_card_info plx_pci_card_info_marathon_pci = { + "Marathon CAN-bus-PCI", 2, + PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR, + {0, 0x00, 0x00}, { {2, 0x00, 0x00}, {4, 0x00, 0x00} }, + &plx_pci_reset_marathon_pci + /* based on PLX9052 */ +}; + +static struct plx_pci_card_info plx_pci_card_info_marathon_pcie = { + "Marathon CAN-bus-PCIe", 2, + PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR, + {0, 0x00, 0x00}, { {2, 0x00, 0x00}, {3, 0x80, 0x00} }, + &plx_pci_reset_marathon_pcie + /* based on PEX8311 */ +}; + +static struct plx_pci_card_info plx_pci_card_info_tews = { + "TEWS TECHNOLOGIES TPMC810", 2, + PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR, + {0, 0x00, 0x00}, { {2, 0x000, 0x80}, {2, 0x100, 0x80} }, + &plx_pci_reset_common + /* based on PLX9030 */ +}; + +static struct plx_pci_card_info plx_pci_card_info_cti = { + "Connect Tech Inc. CANpro/104-Plus Opto (CRG001)", 2, + PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR, + {0, 0x00, 0x00}, { {2, 0x000, 0x80}, {2, 0x100, 0x80} }, + &plx_pci_reset_common + /* based on PLX9030 */ +}; + +static struct plx_pci_card_info plx_pci_card_info_elcus = { + "Eclus CAN-200-PCI", 2, + PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR, + {1, 0x00, 0x00}, { {2, 0x00, 0x80}, {3, 0x00, 0x80} }, + &plx_pci_reset_common + /* based on PLX9030 */ +}; + +static struct plx_pci_card_info plx_pci_card_info_moxa = { + "MOXA", 2, + PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR, + {0, 0x00, 0x00}, { {0, 0x00, 0x80}, {1, 0x00, 0x80} }, + &plx_pci_reset_common + /* based on PLX9052 */ +}; + +static struct plx_pci_card_info plx_pci_card_info_asem_dual_can = { + "ASEM Dual CAN raw PCI", 2, + PLX_PCI_CAN_CLOCK, ASEM_PCI_OCR, PLX_PCI_CDR, + {0, 0x00, 0x00}, { {2, 0x00, 0x00}, {4, 0x00, 0x00} }, + &plx_pci_reset_asem_dual_can_raw + /* based on PLX9030 */ +}; + +static const struct pci_device_id plx_pci_tbl[] = { + { + /* Adlink PCI-7841/cPCI-7841 */ + ADLINK_PCI_VENDOR_ID, ADLINK_PCI_DEVICE_ID, + PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_NETWORK_OTHER << 8, ~0, + (kernel_ulong_t)&plx_pci_card_info_adlink + }, + { + /* Adlink PCI-7841/cPCI-7841 SE */ + ADLINK_PCI_VENDOR_ID, ADLINK_PCI_DEVICE_ID, + PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_COMMUNICATION_OTHER << 8, ~0, + (kernel_ulong_t)&plx_pci_card_info_adlink_se + }, + { + /* esd CAN-PCI/200 */ + PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_VENDOR_ID_ESDGMBH, ESD_PCI_SUB_SYS_ID_PCI200, + 0, 0, + (kernel_ulong_t)&plx_pci_card_info_esd200 + }, + { + /* esd CAN-CPCI/200 */ + PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, + PCI_VENDOR_ID_ESDGMBH, ESD_PCI_SUB_SYS_ID_CPCI200, + 0, 0, + (kernel_ulong_t)&plx_pci_card_info_esd200 + }, + { + /* esd CAN-PCI104/200 */ + PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, + PCI_VENDOR_ID_ESDGMBH, ESD_PCI_SUB_SYS_ID_PCI104200, + 0, 0, + (kernel_ulong_t)&plx_pci_card_info_esd200 + }, + { + /* esd CAN-PCI/266 */ + PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9056, + PCI_VENDOR_ID_ESDGMBH, ESD_PCI_SUB_SYS_ID_PCI266, + 0, 0, + (kernel_ulong_t)&plx_pci_card_info_esd266 + }, + { + /* esd CAN-PMC/266 */ + PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9056, + PCI_VENDOR_ID_ESDGMBH, ESD_PCI_SUB_SYS_ID_PMC266, + 0, 0, + (kernel_ulong_t)&plx_pci_card_info_esd266 + }, + { + /* esd CAN-PCIE/2000 */ + PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9056, + PCI_VENDOR_ID_ESDGMBH, ESD_PCI_SUB_SYS_ID_PCIE2000, + 0, 0, + (kernel_ulong_t)&plx_pci_card_info_esd2000 + }, + { + /* IXXAT PC-I 04/PCI card */ + IXXAT_PCI_VENDOR_ID, IXXAT_PCI_DEVICE_ID, + PCI_ANY_ID, IXXAT_PCI_SUB_SYS_ID, + 0, 0, + (kernel_ulong_t)&plx_pci_card_info_ixxat + }, + { + /* Marathon CAN-bus-PCI card */ + PCI_VENDOR_ID_PLX, MARATHON_PCI_DEVICE_ID, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + (kernel_ulong_t)&plx_pci_card_info_marathon_pci + }, + { + /* Marathon CAN-bus-PCIe card */ + PCI_VENDOR_ID_PLX, MARATHON_PCIE_DEVICE_ID, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + (kernel_ulong_t)&plx_pci_card_info_marathon_pcie + }, + { + /* TEWS TECHNOLOGIES TPMC810 card */ + TEWS_PCI_VENDOR_ID, TEWS_PCI_DEVICE_ID_TMPC810, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + (kernel_ulong_t)&plx_pci_card_info_tews + }, + { + /* Connect Tech Inc. CANpro/104-Plus Opto (CRG001) card */ + PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, + CTI_PCI_VENDOR_ID, CTI_PCI_DEVICE_ID_CRG001, + 0, 0, + (kernel_ulong_t)&plx_pci_card_info_cti + }, + { + /* Elcus CAN-200-PCI */ + CAN200PCI_VENDOR_ID, CAN200PCI_DEVICE_ID, + CAN200PCI_SUB_VENDOR_ID, CAN200PCI_SUB_DEVICE_ID, + 0, 0, + (kernel_ulong_t)&plx_pci_card_info_elcus + }, + { + /* moxa */ + MOXA_PCI_VENDOR_ID, MOXA_PCI_DEVICE_ID, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + (kernel_ulong_t)&plx_pci_card_info_moxa + }, + { + /* ASEM Dual CAN raw */ + ASEM_RAW_CAN_VENDOR_ID, ASEM_RAW_CAN_DEVICE_ID, + ASEM_RAW_CAN_SUB_VENDOR_ID, ASEM_RAW_CAN_SUB_DEVICE_ID, + 0, 0, + (kernel_ulong_t)&plx_pci_card_info_asem_dual_can + }, + { + /* ASEM Dual CAN raw -new model */ + ASEM_RAW_CAN_VENDOR_ID, ASEM_RAW_CAN_DEVICE_ID, + ASEM_RAW_CAN_SUB_VENDOR_ID, ASEM_RAW_CAN_SUB_DEVICE_ID_BIS, + 0, 0, + (kernel_ulong_t)&plx_pci_card_info_asem_dual_can + }, + { 0,} +}; +MODULE_DEVICE_TABLE(pci, plx_pci_tbl); + +static u8 plx_pci_read_reg(const struct sja1000_priv *priv, int port) +{ + return ioread8(priv->reg_base + port); +} + +static void plx_pci_write_reg(const struct sja1000_priv *priv, int port, u8 val) +{ + iowrite8(val, priv->reg_base + port); +} + +/* + * Check if a CAN controller is present at the specified location + * by trying to switch 'em from the Basic mode into the PeliCAN mode. + * Also check states of some registers in reset mode. + */ +static inline int plx_pci_check_sja1000(const struct sja1000_priv *priv) +{ + int flag = 0; + + /* + * Check registers after hardware reset (the Basic mode) + * See states on p. 10 of the Datasheet. + */ + if ((priv->read_reg(priv, REG_CR) & REG_CR_BASICCAN_INITIAL_MASK) == + REG_CR_BASICCAN_INITIAL && + (priv->read_reg(priv, SJA1000_SR) == REG_SR_BASICCAN_INITIAL) && + (priv->read_reg(priv, SJA1000_IR) == REG_IR_BASICCAN_INITIAL)) + flag = 1; + + /* Bring the SJA1000 into the PeliCAN mode*/ + priv->write_reg(priv, SJA1000_CDR, CDR_PELICAN); + + /* + * Check registers after reset in the PeliCAN mode. + * See states on p. 23 of the Datasheet. + */ + if (priv->read_reg(priv, SJA1000_MOD) == REG_MOD_PELICAN_INITIAL && + priv->read_reg(priv, SJA1000_SR) == REG_SR_PELICAN_INITIAL && + priv->read_reg(priv, SJA1000_IR) == REG_IR_PELICAN_INITIAL) + return flag; + + return 0; +} + +/* + * PLX9030/50/52 software reset + * Also LRESET# asserts and brings to reset device on the Local Bus (if wired). + * For most cards it's enough for reset the SJA1000 chips. + */ +static void plx_pci_reset_common(struct pci_dev *pdev) +{ + struct plx_pci_card *card = pci_get_drvdata(pdev); + u32 cntrl; + + cntrl = ioread32(card->conf_addr + PLX_CNTRL); + cntrl |= PLX_PCI_RESET; + iowrite32(cntrl, card->conf_addr + PLX_CNTRL); + udelay(100); + cntrl ^= PLX_PCI_RESET; + iowrite32(cntrl, card->conf_addr + PLX_CNTRL); +}; + +/* + * PLX9056 software reset + * Assert LRESET# and reset device(s) on the Local Bus (if wired). + */ +static void plx9056_pci_reset_common(struct pci_dev *pdev) +{ + struct plx_pci_card *card = pci_get_drvdata(pdev); + u32 cntrl; + + /* issue a local bus reset */ + cntrl = ioread32(card->conf_addr + PLX9056_CNTRL); + cntrl |= PLX_PCI_RESET; + iowrite32(cntrl, card->conf_addr + PLX9056_CNTRL); + udelay(100); + cntrl ^= PLX_PCI_RESET; + iowrite32(cntrl, card->conf_addr + PLX9056_CNTRL); + + /* reload local configuration from EEPROM */ + cntrl |= PLX9056_PCI_RCR; + iowrite32(cntrl, card->conf_addr + PLX9056_CNTRL); + + /* + * There is no safe way to poll for the end + * of reconfiguration process. Waiting for 10ms + * is safe. + */ + mdelay(10); + + cntrl ^= PLX9056_PCI_RCR; + iowrite32(cntrl, card->conf_addr + PLX9056_CNTRL); +}; + +/* Special reset function for Marathon CAN-bus-PCI card */ +static void plx_pci_reset_marathon_pci(struct pci_dev *pdev) +{ + void __iomem *reset_addr; + int i; + static const int reset_bar[2] = {3, 5}; + + plx_pci_reset_common(pdev); + + for (i = 0; i < 2; i++) { + reset_addr = pci_iomap(pdev, reset_bar[i], 0); + if (!reset_addr) { + dev_err(&pdev->dev, "Failed to remap reset " + "space %d (BAR%d)\n", i, reset_bar[i]); + } else { + /* reset the SJA1000 chip */ + iowrite8(0x1, reset_addr); + udelay(100); + pci_iounmap(pdev, reset_addr); + } + } +} + +/* Special reset function for Marathon CAN-bus-PCIe card */ +static void plx_pci_reset_marathon_pcie(struct pci_dev *pdev) +{ + void __iomem *addr; + void __iomem *reset_addr; + int i; + + plx9056_pci_reset_common(pdev); + + for (i = 0; i < 2; i++) { + struct plx_pci_channel_map *chan_map = + &plx_pci_card_info_marathon_pcie.chan_map_tbl[i]; + addr = pci_iomap(pdev, chan_map->bar, chan_map->size); + if (!addr) { + dev_err(&pdev->dev, "Failed to remap reset " + "space %d (BAR%d)\n", i, chan_map->bar); + } else { + /* reset the SJA1000 chip */ + #define MARATHON_PCIE_RESET_OFFSET 32 + reset_addr = addr + chan_map->offset + + MARATHON_PCIE_RESET_OFFSET; + iowrite8(0x1, reset_addr); + udelay(100); + pci_iounmap(pdev, addr); + } + } +} + +/* Special reset function for ASEM Dual CAN raw card */ +static void plx_pci_reset_asem_dual_can_raw(struct pci_dev *pdev) +{ + void __iomem *bar0_addr; + u8 tmpval; + + plx_pci_reset_common(pdev); + + bar0_addr = pci_iomap(pdev, 0, 0); + if (!bar0_addr) { + dev_err(&pdev->dev, "Failed to remap reset space 0 (BAR0)\n"); + return; + } + + /* reset the two SJA1000 chips */ + tmpval = ioread8(bar0_addr + ASEM_RAW_CAN_RST_REGISTER); + tmpval &= ~(ASEM_RAW_CAN_RST_MASK_CAN1 | ASEM_RAW_CAN_RST_MASK_CAN2); + iowrite8(tmpval, bar0_addr + ASEM_RAW_CAN_RST_REGISTER); + usleep_range(300, 400); + tmpval |= ASEM_RAW_CAN_RST_MASK_CAN1 | ASEM_RAW_CAN_RST_MASK_CAN2; + iowrite8(tmpval, bar0_addr + ASEM_RAW_CAN_RST_REGISTER); + usleep_range(300, 400); + pci_iounmap(pdev, bar0_addr); +} + +static void plx_pci_del_card(struct pci_dev *pdev) +{ + struct plx_pci_card *card = pci_get_drvdata(pdev); + struct net_device *dev; + struct sja1000_priv *priv; + int i = 0; + + for (i = 0; i < PLX_PCI_MAX_CHAN; i++) { + dev = card->net_dev[i]; + if (!dev) + continue; + + dev_info(&pdev->dev, "Removing %s\n", dev->name); + unregister_sja1000dev(dev); + priv = netdev_priv(dev); + if (priv->reg_base) + pci_iounmap(pdev, priv->reg_base); + free_sja1000dev(dev); + } + + card->reset_func(pdev); + + /* + * Disable interrupts from PCI-card and disable local + * interrupts + */ + if (pdev->device != PCI_DEVICE_ID_PLX_9056 && + pdev->device != MARATHON_PCIE_DEVICE_ID) + iowrite32(0x0, card->conf_addr + PLX_INTCSR); + else + iowrite32(0x0, card->conf_addr + PLX9056_INTCSR); + + if (card->conf_addr) + pci_iounmap(pdev, card->conf_addr); + + kfree(card); + + pci_disable_device(pdev); +} + +/* + * Probe PLX90xx based device for the SJA1000 chips and register each + * available CAN channel to SJA1000 Socket-CAN subsystem. + */ +static int plx_pci_add_card(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct sja1000_priv *priv; + struct net_device *dev; + struct plx_pci_card *card; + struct plx_pci_card_info *ci; + int err, i; + u32 val; + void __iomem *addr; + + ci = (struct plx_pci_card_info *)ent->driver_data; + + if (pci_enable_device(pdev) < 0) { + dev_err(&pdev->dev, "Failed to enable PCI device\n"); + return -ENODEV; + } + + dev_info(&pdev->dev, "Detected \"%s\" card at slot #%i\n", + ci->name, PCI_SLOT(pdev->devfn)); + + /* Allocate card structures to hold addresses, ... */ + card = kzalloc(sizeof(*card), GFP_KERNEL); + if (!card) { + pci_disable_device(pdev); + return -ENOMEM; + } + + pci_set_drvdata(pdev, card); + + card->channels = 0; + + /* Remap PLX90xx configuration space */ + addr = pci_iomap(pdev, ci->conf_map.bar, ci->conf_map.size); + if (!addr) { + err = -ENOMEM; + dev_err(&pdev->dev, "Failed to remap configuration space " + "(BAR%d)\n", ci->conf_map.bar); + goto failure_cleanup; + } + card->conf_addr = addr + ci->conf_map.offset; + + ci->reset_func(pdev); + card->reset_func = ci->reset_func; + + /* Detect available channels */ + for (i = 0; i < ci->channel_count; i++) { + struct plx_pci_channel_map *cm = &ci->chan_map_tbl[i]; + + dev = alloc_sja1000dev(0); + if (!dev) { + err = -ENOMEM; + goto failure_cleanup; + } + + card->net_dev[i] = dev; + priv = netdev_priv(dev); + priv->priv = card; + priv->irq_flags = IRQF_SHARED; + + dev->irq = pdev->irq; + + /* + * Remap IO space of the SJA1000 chips + * This is device-dependent mapping + */ + addr = pci_iomap(pdev, cm->bar, cm->size); + if (!addr) { + err = -ENOMEM; + dev_err(&pdev->dev, "Failed to remap BAR%d\n", cm->bar); + goto failure_cleanup; + } + + priv->reg_base = addr + cm->offset; + priv->read_reg = plx_pci_read_reg; + priv->write_reg = plx_pci_write_reg; + + /* Check if channel is present */ + if (plx_pci_check_sja1000(priv)) { + priv->can.clock.freq = ci->can_clock; + priv->ocr = ci->ocr; + priv->cdr = ci->cdr; + + SET_NETDEV_DEV(dev, &pdev->dev); + dev->dev_id = i; + + /* Register SJA1000 device */ + err = register_sja1000dev(dev); + if (err) { + dev_err(&pdev->dev, "Registering device failed " + "(err=%d)\n", err); + goto failure_cleanup; + } + + card->channels++; + + dev_info(&pdev->dev, "Channel #%d at 0x%p, irq %d " + "registered as %s\n", i + 1, priv->reg_base, + dev->irq, dev->name); + } else { + dev_err(&pdev->dev, "Channel #%d not detected\n", + i + 1); + free_sja1000dev(dev); + card->net_dev[i] = NULL; + } + } + + if (!card->channels) { + err = -ENODEV; + goto failure_cleanup; + } + + /* + * Enable interrupts from PCI-card (PLX90xx) and enable Local_1, + * Local_2 interrupts from the SJA1000 chips + */ + if (pdev->device != PCI_DEVICE_ID_PLX_9056 && + pdev->device != MARATHON_PCIE_DEVICE_ID) { + val = ioread32(card->conf_addr + PLX_INTCSR); + if (pdev->subsystem_vendor == PCI_VENDOR_ID_ESDGMBH) + val |= PLX_LINT1_EN | PLX_PCI_INT_EN; + else + val |= PLX_LINT1_EN | PLX_LINT2_EN | PLX_PCI_INT_EN; + iowrite32(val, card->conf_addr + PLX_INTCSR); + } else { + iowrite32(PLX9056_LINTI | PLX9056_PCI_INT_EN, + card->conf_addr + PLX9056_INTCSR); + } + return 0; + +failure_cleanup: + dev_err(&pdev->dev, "Error: %d. Cleaning Up.\n", err); + + plx_pci_del_card(pdev); + + return err; +} + +static struct pci_driver plx_pci_driver = { + .name = DRV_NAME, + .id_table = plx_pci_tbl, + .probe = plx_pci_add_card, + .remove = plx_pci_del_card, +}; + +module_pci_driver(plx_pci_driver); diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c new file mode 100644 index 0000000000..743c2eb62b --- /dev/null +++ b/drivers/net/can/sja1000/sja1000.c @@ -0,0 +1,733 @@ +/* + * sja1000.c - Philips SJA1000 network device driver + * + * Copyright (c) 2003 Matthias Brukner, Trajet Gmbh, Rebenring 33, + * 38106 Braunschweig, GERMANY + * + * Copyright (c) 2002-2007 Volkswagen Group Electronic Research + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of Volkswagen nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * Alternatively, provided that this notice is retained in full, this + * software may be distributed under the terms of the GNU General + * Public License ("GPL") version 2, in which case the provisions of the + * GPL apply INSTEAD OF those given above. + * + * The provided data structures and external interfaces from this code + * are not restricted to be used by modules with a GPL compatible license. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "sja1000.h" + +#define DRV_NAME "sja1000" + +MODULE_AUTHOR("Oliver Hartkopp "); +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_DESCRIPTION(DRV_NAME "CAN netdevice driver"); + +static const struct can_bittiming_const sja1000_bittiming_const = { + .name = DRV_NAME, + .tseg1_min = 1, + .tseg1_max = 16, + .tseg2_min = 1, + .tseg2_max = 8, + .sjw_max = 4, + .brp_min = 1, + .brp_max = 64, + .brp_inc = 1, +}; + +static void sja1000_write_cmdreg(struct sja1000_priv *priv, u8 val) +{ + unsigned long flags; + + /* + * The command register needs some locking and time to settle + * the write_reg() operation - especially on SMP systems. + */ + spin_lock_irqsave(&priv->cmdreg_lock, flags); + priv->write_reg(priv, SJA1000_CMR, val); + priv->read_reg(priv, SJA1000_SR); + spin_unlock_irqrestore(&priv->cmdreg_lock, flags); +} + +static int sja1000_is_absent(struct sja1000_priv *priv) +{ + return (priv->read_reg(priv, SJA1000_MOD) == 0xFF); +} + +static int sja1000_probe_chip(struct net_device *dev) +{ + struct sja1000_priv *priv = netdev_priv(dev); + + if (priv->reg_base && sja1000_is_absent(priv)) { + netdev_err(dev, "probing failed\n"); + return 0; + } + return -1; +} + +static void set_reset_mode(struct net_device *dev) +{ + struct sja1000_priv *priv = netdev_priv(dev); + unsigned char status = priv->read_reg(priv, SJA1000_MOD); + int i; + + /* disable interrupts */ + priv->write_reg(priv, SJA1000_IER, IRQ_OFF); + + for (i = 0; i < 100; i++) { + /* check reset bit */ + if (status & MOD_RM) { + priv->can.state = CAN_STATE_STOPPED; + return; + } + + /* reset chip */ + priv->write_reg(priv, SJA1000_MOD, MOD_RM); + udelay(10); + status = priv->read_reg(priv, SJA1000_MOD); + } + + netdev_err(dev, "setting SJA1000 into reset mode failed!\n"); +} + +static void set_normal_mode(struct net_device *dev) +{ + struct sja1000_priv *priv = netdev_priv(dev); + unsigned char status = priv->read_reg(priv, SJA1000_MOD); + u8 mod_reg_val = 0x00; + int i; + + for (i = 0; i < 100; i++) { + /* check reset bit */ + if ((status & MOD_RM) == 0) { + priv->can.state = CAN_STATE_ERROR_ACTIVE; + /* enable interrupts */ + if (priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING) + priv->write_reg(priv, SJA1000_IER, IRQ_ALL); + else + priv->write_reg(priv, SJA1000_IER, + IRQ_ALL & ~IRQ_BEI); + return; + } + + /* set chip to normal mode */ + if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY) + mod_reg_val |= MOD_LOM; + if (priv->can.ctrlmode & CAN_CTRLMODE_PRESUME_ACK) + mod_reg_val |= MOD_STM; + priv->write_reg(priv, SJA1000_MOD, mod_reg_val); + + udelay(10); + + status = priv->read_reg(priv, SJA1000_MOD); + } + + netdev_err(dev, "setting SJA1000 into normal mode failed!\n"); +} + +/* + * initialize SJA1000 chip: + * - reset chip + * - set output mode + * - set baudrate + * - enable interrupts + * - start operating mode + */ +static void chipset_init(struct net_device *dev) +{ + struct sja1000_priv *priv = netdev_priv(dev); + + if (!(priv->flags & SJA1000_QUIRK_NO_CDR_REG)) + /* set clock divider and output control register */ + priv->write_reg(priv, SJA1000_CDR, priv->cdr | CDR_PELICAN); + + /* set acceptance filter (accept all) */ + priv->write_reg(priv, SJA1000_ACCC0, 0x00); + priv->write_reg(priv, SJA1000_ACCC1, 0x00); + priv->write_reg(priv, SJA1000_ACCC2, 0x00); + priv->write_reg(priv, SJA1000_ACCC3, 0x00); + + priv->write_reg(priv, SJA1000_ACCM0, 0xFF); + priv->write_reg(priv, SJA1000_ACCM1, 0xFF); + priv->write_reg(priv, SJA1000_ACCM2, 0xFF); + priv->write_reg(priv, SJA1000_ACCM3, 0xFF); + + priv->write_reg(priv, SJA1000_OCR, priv->ocr | OCR_MODE_NORMAL); +} + +static void sja1000_start(struct net_device *dev) +{ + struct sja1000_priv *priv = netdev_priv(dev); + + /* leave reset mode */ + if (priv->can.state != CAN_STATE_STOPPED) + set_reset_mode(dev); + + /* Initialize chip if uninitialized at this stage */ + if (!(priv->flags & SJA1000_QUIRK_NO_CDR_REG || + priv->read_reg(priv, SJA1000_CDR) & CDR_PELICAN)) + chipset_init(dev); + + /* Clear error counters and error code capture */ + priv->write_reg(priv, SJA1000_TXERR, 0x0); + priv->write_reg(priv, SJA1000_RXERR, 0x0); + priv->read_reg(priv, SJA1000_ECC); + + /* clear interrupt flags */ + priv->read_reg(priv, SJA1000_IR); + + /* leave reset mode */ + set_normal_mode(dev); +} + +static int sja1000_set_mode(struct net_device *dev, enum can_mode mode) +{ + switch (mode) { + case CAN_MODE_START: + sja1000_start(dev); + if (netif_queue_stopped(dev)) + netif_wake_queue(dev); + break; + + default: + return -EOPNOTSUPP; + } + + return 0; +} + +static int sja1000_set_bittiming(struct net_device *dev) +{ + struct sja1000_priv *priv = netdev_priv(dev); + struct can_bittiming *bt = &priv->can.bittiming; + u8 btr0, btr1; + + btr0 = ((bt->brp - 1) & 0x3f) | (((bt->sjw - 1) & 0x3) << 6); + btr1 = ((bt->prop_seg + bt->phase_seg1 - 1) & 0xf) | + (((bt->phase_seg2 - 1) & 0x7) << 4); + if (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES) + btr1 |= 0x80; + + netdev_info(dev, "setting BTR0=0x%02x BTR1=0x%02x\n", btr0, btr1); + + priv->write_reg(priv, SJA1000_BTR0, btr0); + priv->write_reg(priv, SJA1000_BTR1, btr1); + + return 0; +} + +static int sja1000_get_berr_counter(const struct net_device *dev, + struct can_berr_counter *bec) +{ + struct sja1000_priv *priv = netdev_priv(dev); + + bec->txerr = priv->read_reg(priv, SJA1000_TXERR); + bec->rxerr = priv->read_reg(priv, SJA1000_RXERR); + + return 0; +} + +/* + * transmit a CAN message + * message layout in the sk_buff should be like this: + * xx xx xx xx ff ll 00 11 22 33 44 55 66 77 + * [ can-id ] [flags] [len] [can data (up to 8 bytes] + */ +static netdev_tx_t sja1000_start_xmit(struct sk_buff *skb, + struct net_device *dev) +{ + struct sja1000_priv *priv = netdev_priv(dev); + struct can_frame *cf = (struct can_frame *)skb->data; + uint8_t fi; + canid_t id; + uint8_t dreg; + u8 cmd_reg_val = 0x00; + int i; + + if (can_dev_dropped_skb(dev, skb)) + return NETDEV_TX_OK; + + netif_stop_queue(dev); + + fi = can_get_cc_dlc(cf, priv->can.ctrlmode); + id = cf->can_id; + + if (id & CAN_RTR_FLAG) + fi |= SJA1000_FI_RTR; + + if (id & CAN_EFF_FLAG) { + fi |= SJA1000_FI_FF; + dreg = SJA1000_EFF_BUF; + priv->write_reg(priv, SJA1000_FI, fi); + priv->write_reg(priv, SJA1000_ID1, (id & 0x1fe00000) >> 21); + priv->write_reg(priv, SJA1000_ID2, (id & 0x001fe000) >> 13); + priv->write_reg(priv, SJA1000_ID3, (id & 0x00001fe0) >> 5); + priv->write_reg(priv, SJA1000_ID4, (id & 0x0000001f) << 3); + } else { + dreg = SJA1000_SFF_BUF; + priv->write_reg(priv, SJA1000_FI, fi); + priv->write_reg(priv, SJA1000_ID1, (id & 0x000007f8) >> 3); + priv->write_reg(priv, SJA1000_ID2, (id & 0x00000007) << 5); + } + + for (i = 0; i < cf->len; i++) + priv->write_reg(priv, dreg++, cf->data[i]); + + can_put_echo_skb(skb, dev, 0, 0); + + if (priv->can.ctrlmode & CAN_CTRLMODE_ONE_SHOT) + cmd_reg_val |= CMD_AT; + + if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK) + cmd_reg_val |= CMD_SRR; + else + cmd_reg_val |= CMD_TR; + + sja1000_write_cmdreg(priv, cmd_reg_val); + + return NETDEV_TX_OK; +} + +static void sja1000_rx(struct net_device *dev) +{ + struct sja1000_priv *priv = netdev_priv(dev); + struct net_device_stats *stats = &dev->stats; + struct can_frame *cf; + struct sk_buff *skb; + uint8_t fi; + uint8_t dreg; + canid_t id; + int i; + + /* create zero'ed CAN frame buffer */ + skb = alloc_can_skb(dev, &cf); + if (skb == NULL) + return; + + fi = priv->read_reg(priv, SJA1000_FI); + + if (fi & SJA1000_FI_FF) { + /* extended frame format (EFF) */ + dreg = SJA1000_EFF_BUF; + id = (priv->read_reg(priv, SJA1000_ID1) << 21) + | (priv->read_reg(priv, SJA1000_ID2) << 13) + | (priv->read_reg(priv, SJA1000_ID3) << 5) + | (priv->read_reg(priv, SJA1000_ID4) >> 3); + id |= CAN_EFF_FLAG; + } else { + /* standard frame format (SFF) */ + dreg = SJA1000_SFF_BUF; + id = (priv->read_reg(priv, SJA1000_ID1) << 3) + | (priv->read_reg(priv, SJA1000_ID2) >> 5); + } + + can_frame_set_cc_len(cf, fi & 0x0F, priv->can.ctrlmode); + if (fi & SJA1000_FI_RTR) { + id |= CAN_RTR_FLAG; + } else { + for (i = 0; i < cf->len; i++) + cf->data[i] = priv->read_reg(priv, dreg++); + + stats->rx_bytes += cf->len; + } + stats->rx_packets++; + + cf->can_id = id; + + /* release receive buffer */ + sja1000_write_cmdreg(priv, CMD_RRB); + + netif_rx(skb); +} + +static irqreturn_t sja1000_reset_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = (struct net_device *)dev_id; + + netdev_dbg(dev, "performing a soft reset upon overrun\n"); + + netif_tx_lock(dev); + + can_free_echo_skb(dev, 0, NULL); + sja1000_set_mode(dev, CAN_MODE_START); + + netif_tx_unlock(dev); + + return IRQ_HANDLED; +} + +static int sja1000_err(struct net_device *dev, uint8_t isrc, uint8_t status) +{ + struct sja1000_priv *priv = netdev_priv(dev); + struct net_device_stats *stats = &dev->stats; + struct can_frame *cf; + struct sk_buff *skb; + enum can_state state = priv->can.state; + enum can_state rx_state, tx_state; + unsigned int rxerr, txerr; + uint8_t ecc, alc; + int ret = 0; + + skb = alloc_can_err_skb(dev, &cf); + if (skb == NULL) + return -ENOMEM; + + txerr = priv->read_reg(priv, SJA1000_TXERR); + rxerr = priv->read_reg(priv, SJA1000_RXERR); + + if (isrc & IRQ_DOI) { + /* data overrun interrupt */ + netdev_dbg(dev, "data overrun interrupt\n"); + cf->can_id |= CAN_ERR_CRTL; + cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW; + stats->rx_over_errors++; + stats->rx_errors++; + sja1000_write_cmdreg(priv, CMD_CDO); /* clear bit */ + + /* Some controllers needs additional handling upon overrun + * condition: the controller may sometimes be totally confused + * and refuse any new frame while its buffer is empty. The only + * way to re-sync the read vs. write buffer offsets is to + * stop any current handling and perform a reset. + */ + if (priv->flags & SJA1000_QUIRK_RESET_ON_OVERRUN) + ret = IRQ_WAKE_THREAD; + } + + if (isrc & IRQ_EI) { + /* error warning interrupt */ + netdev_dbg(dev, "error warning interrupt\n"); + + if (status & SR_BS) + state = CAN_STATE_BUS_OFF; + else if (status & SR_ES) + state = CAN_STATE_ERROR_WARNING; + else + state = CAN_STATE_ERROR_ACTIVE; + } + if (state != CAN_STATE_BUS_OFF) { + cf->can_id |= CAN_ERR_CNT; + cf->data[6] = txerr; + cf->data[7] = rxerr; + } + if (isrc & IRQ_BEI) { + /* bus error interrupt */ + priv->can.can_stats.bus_error++; + stats->rx_errors++; + + ecc = priv->read_reg(priv, SJA1000_ECC); + + cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR; + + /* set error type */ + switch (ecc & ECC_MASK) { + case ECC_BIT: + cf->data[2] |= CAN_ERR_PROT_BIT; + break; + case ECC_FORM: + cf->data[2] |= CAN_ERR_PROT_FORM; + break; + case ECC_STUFF: + cf->data[2] |= CAN_ERR_PROT_STUFF; + break; + default: + break; + } + + /* set error location */ + cf->data[3] = ecc & ECC_SEG; + + /* Error occurred during transmission? */ + if ((ecc & ECC_DIR) == 0) + cf->data[2] |= CAN_ERR_PROT_TX; + } + if (isrc & IRQ_EPI) { + /* error passive interrupt */ + netdev_dbg(dev, "error passive interrupt\n"); + + if (state == CAN_STATE_ERROR_PASSIVE) + state = CAN_STATE_ERROR_WARNING; + else + state = CAN_STATE_ERROR_PASSIVE; + } + if (isrc & IRQ_ALI) { + /* arbitration lost interrupt */ + netdev_dbg(dev, "arbitration lost interrupt\n"); + alc = priv->read_reg(priv, SJA1000_ALC); + priv->can.can_stats.arbitration_lost++; + cf->can_id |= CAN_ERR_LOSTARB; + cf->data[0] = alc & 0x1f; + } + + if (state != priv->can.state) { + tx_state = txerr >= rxerr ? state : 0; + rx_state = txerr <= rxerr ? state : 0; + + can_change_state(dev, cf, tx_state, rx_state); + + if(state == CAN_STATE_BUS_OFF) + can_bus_off(dev); + } + + netif_rx(skb); + + return ret; +} + +irqreturn_t sja1000_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = (struct net_device *)dev_id; + struct sja1000_priv *priv = netdev_priv(dev); + struct net_device_stats *stats = &dev->stats; + uint8_t isrc, status; + irqreturn_t ret = 0; + int n = 0, err; + + if (priv->pre_irq) + priv->pre_irq(priv); + + /* Shared interrupts and IRQ off? */ + if (priv->read_reg(priv, SJA1000_IER) == IRQ_OFF) + goto out; + + while ((isrc = priv->read_reg(priv, SJA1000_IR)) && + (n < SJA1000_MAX_IRQ)) { + + status = priv->read_reg(priv, SJA1000_SR); + /* check for absent controller due to hw unplug */ + if (status == 0xFF && sja1000_is_absent(priv)) + goto out; + + if (isrc & IRQ_WUI) + netdev_warn(dev, "wakeup interrupt\n"); + + if (isrc & IRQ_TI) { + /* transmission buffer released */ + if (priv->can.ctrlmode & CAN_CTRLMODE_ONE_SHOT && + !(status & SR_TCS)) { + stats->tx_errors++; + can_free_echo_skb(dev, 0, NULL); + } else { + /* transmission complete */ + stats->tx_bytes += can_get_echo_skb(dev, 0, NULL); + stats->tx_packets++; + } + netif_wake_queue(dev); + } + if (isrc & IRQ_RI) { + /* receive interrupt */ + while (status & SR_RBS) { + sja1000_rx(dev); + status = priv->read_reg(priv, SJA1000_SR); + /* check for absent controller */ + if (status == 0xFF && sja1000_is_absent(priv)) + goto out; + } + } + if (isrc & (IRQ_DOI | IRQ_EI | IRQ_BEI | IRQ_EPI | IRQ_ALI)) { + /* error interrupt */ + err = sja1000_err(dev, isrc, status); + if (err == IRQ_WAKE_THREAD) + ret = err; + if (err) + break; + } + n++; + } +out: + if (!ret) + ret = (n) ? IRQ_HANDLED : IRQ_NONE; + + if (priv->post_irq) + priv->post_irq(priv); + + if (n >= SJA1000_MAX_IRQ) + netdev_dbg(dev, "%d messages handled in ISR", n); + + return ret; +} +EXPORT_SYMBOL_GPL(sja1000_interrupt); + +static int sja1000_open(struct net_device *dev) +{ + struct sja1000_priv *priv = netdev_priv(dev); + int err; + + /* set chip into reset mode */ + set_reset_mode(dev); + + /* common open */ + err = open_candev(dev); + if (err) + return err; + + /* register interrupt handler, if not done by the device driver */ + if (!(priv->flags & SJA1000_CUSTOM_IRQ_HANDLER)) { + err = request_threaded_irq(dev->irq, sja1000_interrupt, + sja1000_reset_interrupt, + priv->irq_flags, dev->name, (void *)dev); + if (err) { + close_candev(dev); + return -EAGAIN; + } + } + + /* init and start chi */ + sja1000_start(dev); + + netif_start_queue(dev); + + return 0; +} + +static int sja1000_close(struct net_device *dev) +{ + struct sja1000_priv *priv = netdev_priv(dev); + + netif_stop_queue(dev); + set_reset_mode(dev); + + if (!(priv->flags & SJA1000_CUSTOM_IRQ_HANDLER)) + free_irq(dev->irq, (void *)dev); + + close_candev(dev); + + return 0; +} + +struct net_device *alloc_sja1000dev(int sizeof_priv) +{ + struct net_device *dev; + struct sja1000_priv *priv; + + dev = alloc_candev(sizeof(struct sja1000_priv) + sizeof_priv, + SJA1000_ECHO_SKB_MAX); + if (!dev) + return NULL; + + priv = netdev_priv(dev); + + priv->dev = dev; + priv->can.bittiming_const = &sja1000_bittiming_const; + priv->can.do_set_bittiming = sja1000_set_bittiming; + priv->can.do_set_mode = sja1000_set_mode; + priv->can.do_get_berr_counter = sja1000_get_berr_counter; + priv->can.ctrlmode_supported = CAN_CTRLMODE_LOOPBACK | + CAN_CTRLMODE_LISTENONLY | + CAN_CTRLMODE_3_SAMPLES | + CAN_CTRLMODE_ONE_SHOT | + CAN_CTRLMODE_BERR_REPORTING | + CAN_CTRLMODE_PRESUME_ACK | + CAN_CTRLMODE_CC_LEN8_DLC; + + spin_lock_init(&priv->cmdreg_lock); + + if (sizeof_priv) + priv->priv = (void *)priv + sizeof(struct sja1000_priv); + + return dev; +} +EXPORT_SYMBOL_GPL(alloc_sja1000dev); + +void free_sja1000dev(struct net_device *dev) +{ + free_candev(dev); +} +EXPORT_SYMBOL_GPL(free_sja1000dev); + +static const struct net_device_ops sja1000_netdev_ops = { + .ndo_open = sja1000_open, + .ndo_stop = sja1000_close, + .ndo_start_xmit = sja1000_start_xmit, + .ndo_change_mtu = can_change_mtu, +}; + +static const struct ethtool_ops sja1000_ethtool_ops = { + .get_ts_info = ethtool_op_get_ts_info, +}; + +int register_sja1000dev(struct net_device *dev) +{ + if (!sja1000_probe_chip(dev)) + return -ENODEV; + + dev->flags |= IFF_ECHO; /* we support local echo */ + dev->netdev_ops = &sja1000_netdev_ops; + dev->ethtool_ops = &sja1000_ethtool_ops; + + set_reset_mode(dev); + chipset_init(dev); + + return register_candev(dev); +} +EXPORT_SYMBOL_GPL(register_sja1000dev); + +void unregister_sja1000dev(struct net_device *dev) +{ + set_reset_mode(dev); + unregister_candev(dev); +} +EXPORT_SYMBOL_GPL(unregister_sja1000dev); + +static __init int sja1000_init(void) +{ + printk(KERN_INFO "%s CAN netdevice driver\n", DRV_NAME); + + return 0; +} + +module_init(sja1000_init); + +static __exit void sja1000_exit(void) +{ + printk(KERN_INFO "%s: driver removed\n", DRV_NAME); +} + +module_exit(sja1000_exit); diff --git a/drivers/net/can/sja1000/sja1000.h b/drivers/net/can/sja1000/sja1000.h new file mode 100644 index 0000000000..f015e39e22 --- /dev/null +++ b/drivers/net/can/sja1000/sja1000.h @@ -0,0 +1,184 @@ +/* + * sja1000.h - Philips SJA1000 network device driver + * + * Copyright (c) 2003 Matthias Brukner, Trajet Gmbh, Rebenring 33, + * 38106 Braunschweig, GERMANY + * + * Copyright (c) 2002-2007 Volkswagen Group Electronic Research + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of Volkswagen nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * Alternatively, provided that this notice is retained in full, this + * software may be distributed under the terms of the GNU General + * Public License ("GPL") version 2, in which case the provisions of the + * GPL apply INSTEAD OF those given above. + * + * The provided data structures and external interfaces from this code + * are not restricted to be used by modules with a GPL compatible license. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + */ + +#ifndef SJA1000_DEV_H +#define SJA1000_DEV_H + +#include +#include +#include + +#define SJA1000_ECHO_SKB_MAX 1 /* the SJA1000 has one TX buffer object */ + +#define SJA1000_MAX_IRQ 20 /* max. number of interrupts handled in ISR */ + +/* SJA1000 registers - manual section 6.4 (Pelican Mode) */ +#define SJA1000_MOD 0x00 +#define SJA1000_CMR 0x01 +#define SJA1000_SR 0x02 +#define SJA1000_IR 0x03 +#define SJA1000_IER 0x04 +#define SJA1000_ALC 0x0B +#define SJA1000_ECC 0x0C +#define SJA1000_EWL 0x0D +#define SJA1000_RXERR 0x0E +#define SJA1000_TXERR 0x0F +#define SJA1000_ACCC0 0x10 +#define SJA1000_ACCC1 0x11 +#define SJA1000_ACCC2 0x12 +#define SJA1000_ACCC3 0x13 +#define SJA1000_ACCM0 0x14 +#define SJA1000_ACCM1 0x15 +#define SJA1000_ACCM2 0x16 +#define SJA1000_ACCM3 0x17 +#define SJA1000_RMC 0x1D +#define SJA1000_RBSA 0x1E + +/* Common registers - manual section 6.5 */ +#define SJA1000_BTR0 0x06 +#define SJA1000_BTR1 0x07 +#define SJA1000_OCR 0x08 +#define SJA1000_CDR 0x1F + +#define SJA1000_FI 0x10 +#define SJA1000_SFF_BUF 0x13 +#define SJA1000_EFF_BUF 0x15 + +#define SJA1000_FI_FF 0x80 +#define SJA1000_FI_RTR 0x40 + +#define SJA1000_ID1 0x11 +#define SJA1000_ID2 0x12 +#define SJA1000_ID3 0x13 +#define SJA1000_ID4 0x14 + +#define SJA1000_CAN_RAM 0x20 + +/* mode register */ +#define MOD_RM 0x01 +#define MOD_LOM 0x02 +#define MOD_STM 0x04 +#define MOD_AFM 0x08 +#define MOD_SM 0x10 + +/* commands */ +#define CMD_SRR 0x10 +#define CMD_CDO 0x08 +#define CMD_RRB 0x04 +#define CMD_AT 0x02 +#define CMD_TR 0x01 + +/* interrupt sources */ +#define IRQ_BEI 0x80 +#define IRQ_ALI 0x40 +#define IRQ_EPI 0x20 +#define IRQ_WUI 0x10 +#define IRQ_DOI 0x08 +#define IRQ_EI 0x04 +#define IRQ_TI 0x02 +#define IRQ_RI 0x01 +#define IRQ_ALL 0xFF +#define IRQ_OFF 0x00 + +/* status register content */ +#define SR_BS 0x80 +#define SR_ES 0x40 +#define SR_TS 0x20 +#define SR_RS 0x10 +#define SR_TCS 0x08 +#define SR_TBS 0x04 +#define SR_DOS 0x02 +#define SR_RBS 0x01 + +#define SR_CRIT (SR_BS|SR_ES) + +/* ECC register */ +#define ECC_SEG 0x1F +#define ECC_DIR 0x20 +#define ECC_ERR 6 +#define ECC_BIT 0x00 +#define ECC_FORM 0x40 +#define ECC_STUFF 0x80 +#define ECC_MASK 0xc0 + +/* + * Flags for sja1000priv.flags + */ +#define SJA1000_CUSTOM_IRQ_HANDLER BIT(0) +#define SJA1000_QUIRK_NO_CDR_REG BIT(1) +#define SJA1000_QUIRK_RESET_ON_OVERRUN BIT(2) + +/* + * SJA1000 private data structure + */ +struct sja1000_priv { + struct can_priv can; /* must be the first member */ + struct sk_buff *echo_skb; + + /* the lower-layer is responsible for appropriate locking */ + u8 (*read_reg) (const struct sja1000_priv *priv, int reg); + void (*write_reg) (const struct sja1000_priv *priv, int reg, u8 val); + void (*pre_irq) (const struct sja1000_priv *priv); + void (*post_irq) (const struct sja1000_priv *priv); + + void *priv; /* for board-specific data */ + struct net_device *dev; + + void __iomem *reg_base; /* ioremap'ed address to registers */ + unsigned long irq_flags; /* for request_irq() */ + spinlock_t cmdreg_lock; /* lock for concurrent cmd register writes */ + + u16 flags; /* custom mode flags */ + u8 ocr; /* output control register */ + u8 cdr; /* clock divider register */ +}; + +struct net_device *alloc_sja1000dev(int sizeof_priv); +void free_sja1000dev(struct net_device *dev); +int register_sja1000dev(struct net_device *dev); +void unregister_sja1000dev(struct net_device *dev); + +irqreturn_t sja1000_interrupt(int irq, void *dev_id); + +#endif /* SJA1000_DEV_H */ diff --git a/drivers/net/can/sja1000/sja1000_isa.c b/drivers/net/can/sja1000/sja1000_isa.c new file mode 100644 index 0000000000..fca5a9a1d8 --- /dev/null +++ b/drivers/net/can/sja1000/sja1000_isa.c @@ -0,0 +1,312 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2009 Wolfgang Grandegger + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "sja1000.h" + +#define DRV_NAME "sja1000_isa" + +#define MAXDEV 8 + +MODULE_AUTHOR("Wolfgang Grandegger "); +MODULE_DESCRIPTION("Socket-CAN driver for SJA1000 on the ISA bus"); +MODULE_LICENSE("GPL v2"); + +#define CLK_DEFAULT 16000000 /* 16 MHz */ +#define CDR_DEFAULT (CDR_CBP | CDR_CLK_OFF) +#define OCR_DEFAULT OCR_TX0_PUSHPULL + +static unsigned long port[MAXDEV]; +static unsigned long mem[MAXDEV]; +static int irq[MAXDEV]; +static int clk[MAXDEV]; +static unsigned char cdr[MAXDEV] = {[0 ... (MAXDEV - 1)] = 0xff}; +static unsigned char ocr[MAXDEV] = {[0 ... (MAXDEV - 1)] = 0xff}; +static int indirect[MAXDEV] = {[0 ... (MAXDEV - 1)] = -1}; +static spinlock_t indirect_lock[MAXDEV]; /* lock for indirect access mode */ + +module_param_hw_array(port, ulong, ioport, NULL, 0444); +MODULE_PARM_DESC(port, "I/O port number"); + +module_param_hw_array(mem, ulong, iomem, NULL, 0444); +MODULE_PARM_DESC(mem, "I/O memory address"); + +module_param_hw_array(indirect, int, ioport, NULL, 0444); +MODULE_PARM_DESC(indirect, "Indirect access via address and data port"); + +module_param_hw_array(irq, int, irq, NULL, 0444); +MODULE_PARM_DESC(irq, "IRQ number"); + +module_param_array(clk, int, NULL, 0444); +MODULE_PARM_DESC(clk, "External oscillator clock frequency " + "(default=16000000 [16 MHz])"); + +module_param_array(cdr, byte, NULL, 0444); +MODULE_PARM_DESC(cdr, "Clock divider register " + "(default=0x48 [CDR_CBP | CDR_CLK_OFF])"); + +module_param_array(ocr, byte, NULL, 0444); +MODULE_PARM_DESC(ocr, "Output control register " + "(default=0x18 [OCR_TX0_PUSHPULL])"); + +#define SJA1000_IOSIZE 0x20 +#define SJA1000_IOSIZE_INDIRECT 0x02 + +static struct platform_device *sja1000_isa_devs[MAXDEV]; + +static u8 sja1000_isa_mem_read_reg(const struct sja1000_priv *priv, int reg) +{ + return readb(priv->reg_base + reg); +} + +static void sja1000_isa_mem_write_reg(const struct sja1000_priv *priv, + int reg, u8 val) +{ + writeb(val, priv->reg_base + reg); +} + +static u8 sja1000_isa_port_read_reg(const struct sja1000_priv *priv, int reg) +{ + return inb((unsigned long)priv->reg_base + reg); +} + +static void sja1000_isa_port_write_reg(const struct sja1000_priv *priv, + int reg, u8 val) +{ + outb(val, (unsigned long)priv->reg_base + reg); +} + +static u8 sja1000_isa_port_read_reg_indirect(const struct sja1000_priv *priv, + int reg) +{ + unsigned long flags, base = (unsigned long)priv->reg_base; + u8 readval; + + spin_lock_irqsave(&indirect_lock[priv->dev->dev_id], flags); + outb(reg, base); + readval = inb(base + 1); + spin_unlock_irqrestore(&indirect_lock[priv->dev->dev_id], flags); + + return readval; +} + +static void sja1000_isa_port_write_reg_indirect(const struct sja1000_priv *priv, + int reg, u8 val) +{ + unsigned long flags, base = (unsigned long)priv->reg_base; + + spin_lock_irqsave(&indirect_lock[priv->dev->dev_id], flags); + outb(reg, base); + outb(val, base + 1); + spin_unlock_irqrestore(&indirect_lock[priv->dev->dev_id], flags); +} + +static int sja1000_isa_probe(struct platform_device *pdev) +{ + struct net_device *dev; + struct sja1000_priv *priv; + void __iomem *base = NULL; + int iosize = SJA1000_IOSIZE; + int idx = pdev->id; + int err; + + dev_dbg(&pdev->dev, "probing idx=%d: port=%#lx, mem=%#lx, irq=%d\n", + idx, port[idx], mem[idx], irq[idx]); + + if (mem[idx]) { + if (!request_mem_region(mem[idx], iosize, DRV_NAME)) { + err = -EBUSY; + goto exit; + } + base = ioremap(mem[idx], iosize); + if (!base) { + err = -ENOMEM; + goto exit_release; + } + } else { + if (indirect[idx] > 0 || + (indirect[idx] == -1 && indirect[0] > 0)) + iosize = SJA1000_IOSIZE_INDIRECT; + if (!request_region(port[idx], iosize, DRV_NAME)) { + err = -EBUSY; + goto exit; + } + } + + dev = alloc_sja1000dev(0); + if (!dev) { + err = -ENOMEM; + goto exit_unmap; + } + priv = netdev_priv(dev); + + dev->irq = irq[idx]; + priv->irq_flags = IRQF_SHARED; + if (mem[idx]) { + priv->reg_base = base; + dev->base_addr = mem[idx]; + priv->read_reg = sja1000_isa_mem_read_reg; + priv->write_reg = sja1000_isa_mem_write_reg; + } else { + priv->reg_base = (void __iomem *)port[idx]; + dev->base_addr = port[idx]; + + if (iosize == SJA1000_IOSIZE_INDIRECT) { + priv->read_reg = sja1000_isa_port_read_reg_indirect; + priv->write_reg = sja1000_isa_port_write_reg_indirect; + spin_lock_init(&indirect_lock[idx]); + } else { + priv->read_reg = sja1000_isa_port_read_reg; + priv->write_reg = sja1000_isa_port_write_reg; + } + } + + if (clk[idx]) + priv->can.clock.freq = clk[idx] / 2; + else if (clk[0]) + priv->can.clock.freq = clk[0] / 2; + else + priv->can.clock.freq = CLK_DEFAULT / 2; + + if (ocr[idx] != 0xff) + priv->ocr = ocr[idx]; + else if (ocr[0] != 0xff) + priv->ocr = ocr[0]; + else + priv->ocr = OCR_DEFAULT; + + if (cdr[idx] != 0xff) + priv->cdr = cdr[idx]; + else if (cdr[0] != 0xff) + priv->cdr = cdr[0]; + else + priv->cdr = CDR_DEFAULT; + + platform_set_drvdata(pdev, dev); + SET_NETDEV_DEV(dev, &pdev->dev); + dev->dev_id = idx; + + err = register_sja1000dev(dev); + if (err) { + dev_err(&pdev->dev, "registering %s failed (err=%d)\n", + DRV_NAME, err); + goto exit_free; + } + + dev_info(&pdev->dev, "%s device registered (reg_base=0x%p, irq=%d)\n", + DRV_NAME, priv->reg_base, dev->irq); + return 0; + +exit_free: + free_sja1000dev(dev); +exit_unmap: + if (mem[idx]) + iounmap(base); +exit_release: + if (mem[idx]) + release_mem_region(mem[idx], iosize); + else + release_region(port[idx], iosize); +exit: + return err; +} + +static void sja1000_isa_remove(struct platform_device *pdev) +{ + struct net_device *dev = platform_get_drvdata(pdev); + struct sja1000_priv *priv = netdev_priv(dev); + int idx = pdev->id; + + unregister_sja1000dev(dev); + + if (mem[idx]) { + iounmap(priv->reg_base); + release_mem_region(mem[idx], SJA1000_IOSIZE); + } else { + if (priv->read_reg == sja1000_isa_port_read_reg_indirect) + release_region(port[idx], SJA1000_IOSIZE_INDIRECT); + else + release_region(port[idx], SJA1000_IOSIZE); + } + free_sja1000dev(dev); +} + +static struct platform_driver sja1000_isa_driver = { + .probe = sja1000_isa_probe, + .remove_new = sja1000_isa_remove, + .driver = { + .name = DRV_NAME, + }, +}; + +static int __init sja1000_isa_init(void) +{ + int idx, err; + + for (idx = 0; idx < MAXDEV; idx++) { + if ((port[idx] || mem[idx]) && irq[idx]) { + sja1000_isa_devs[idx] = + platform_device_alloc(DRV_NAME, idx); + if (!sja1000_isa_devs[idx]) { + err = -ENOMEM; + goto exit_free_devices; + } + err = platform_device_add(sja1000_isa_devs[idx]); + if (err) { + platform_device_put(sja1000_isa_devs[idx]); + goto exit_free_devices; + } + pr_debug("%s: platform device %d: port=%#lx, mem=%#lx, " + "irq=%d\n", + DRV_NAME, idx, port[idx], mem[idx], irq[idx]); + } else if (idx == 0 || port[idx] || mem[idx]) { + pr_err("%s: insufficient parameters supplied\n", + DRV_NAME); + err = -EINVAL; + goto exit_free_devices; + } + } + + err = platform_driver_register(&sja1000_isa_driver); + if (err) + goto exit_free_devices; + + pr_info("Legacy %s driver for max. %d devices registered\n", + DRV_NAME, MAXDEV); + + return 0; + +exit_free_devices: + while (--idx >= 0) { + if (sja1000_isa_devs[idx]) + platform_device_unregister(sja1000_isa_devs[idx]); + } + + return err; +} + +static void __exit sja1000_isa_exit(void) +{ + int idx; + + platform_driver_unregister(&sja1000_isa_driver); + for (idx = 0; idx < MAXDEV; idx++) { + if (sja1000_isa_devs[idx]) + platform_device_unregister(sja1000_isa_devs[idx]); + } +} + +module_init(sja1000_isa_init); +module_exit(sja1000_isa_exit); diff --git a/drivers/net/can/sja1000/sja1000_platform.c b/drivers/net/can/sja1000/sja1000_platform.c new file mode 100644 index 0000000000..33f0e46ab1 --- /dev/null +++ b/drivers/net/can/sja1000/sja1000_platform.c @@ -0,0 +1,339 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2005 Sascha Hauer, Pengutronix + * Copyright (C) 2007 Wolfgang Grandegger + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "sja1000.h" + +#define DRV_NAME "sja1000_platform" +#define SP_CAN_CLOCK (16000000 / 2) + +MODULE_AUTHOR("Sascha Hauer "); +MODULE_AUTHOR("Wolfgang Grandegger "); +MODULE_DESCRIPTION("Socket-CAN driver for SJA1000 on the platform bus"); +MODULE_ALIAS("platform:" DRV_NAME); +MODULE_LICENSE("GPL v2"); + +struct sja1000_of_data { + size_t priv_sz; + void (*init)(struct sja1000_priv *priv, struct device_node *of); +}; + +struct technologic_priv { + spinlock_t io_lock; +}; + +static u8 sp_read_reg8(const struct sja1000_priv *priv, int reg) +{ + return ioread8(priv->reg_base + reg); +} + +static void sp_write_reg8(const struct sja1000_priv *priv, int reg, u8 val) +{ + iowrite8(val, priv->reg_base + reg); +} + +static u8 sp_read_reg16(const struct sja1000_priv *priv, int reg) +{ + return ioread8(priv->reg_base + reg * 2); +} + +static void sp_write_reg16(const struct sja1000_priv *priv, int reg, u8 val) +{ + iowrite8(val, priv->reg_base + reg * 2); +} + +static u8 sp_read_reg32(const struct sja1000_priv *priv, int reg) +{ + return ioread8(priv->reg_base + reg * 4); +} + +static void sp_write_reg32(const struct sja1000_priv *priv, int reg, u8 val) +{ + iowrite8(val, priv->reg_base + reg * 4); +} + +static u8 sp_technologic_read_reg16(const struct sja1000_priv *priv, int reg) +{ + struct technologic_priv *tp = priv->priv; + unsigned long flags; + u8 val; + + spin_lock_irqsave(&tp->io_lock, flags); + iowrite16(reg, priv->reg_base + 0); + val = ioread16(priv->reg_base + 2); + spin_unlock_irqrestore(&tp->io_lock, flags); + + return val; +} + +static void sp_technologic_write_reg16(const struct sja1000_priv *priv, + int reg, u8 val) +{ + struct technologic_priv *tp = priv->priv; + unsigned long flags; + + spin_lock_irqsave(&tp->io_lock, flags); + iowrite16(reg, priv->reg_base + 0); + iowrite16(val, priv->reg_base + 2); + spin_unlock_irqrestore(&tp->io_lock, flags); +} + +static void sp_technologic_init(struct sja1000_priv *priv, struct device_node *of) +{ + struct technologic_priv *tp = priv->priv; + + priv->read_reg = sp_technologic_read_reg16; + priv->write_reg = sp_technologic_write_reg16; + spin_lock_init(&tp->io_lock); +} + +static void sp_rzn1_init(struct sja1000_priv *priv, struct device_node *of) +{ + priv->flags = SJA1000_QUIRK_NO_CDR_REG | SJA1000_QUIRK_RESET_ON_OVERRUN; +} + +static void sp_populate(struct sja1000_priv *priv, + struct sja1000_platform_data *pdata, + unsigned long resource_mem_flags) +{ + /* The CAN clock frequency is half the oscillator clock frequency */ + priv->can.clock.freq = pdata->osc_freq / 2; + priv->ocr = pdata->ocr; + priv->cdr = pdata->cdr; + + switch (resource_mem_flags & IORESOURCE_MEM_TYPE_MASK) { + case IORESOURCE_MEM_32BIT: + priv->read_reg = sp_read_reg32; + priv->write_reg = sp_write_reg32; + break; + case IORESOURCE_MEM_16BIT: + priv->read_reg = sp_read_reg16; + priv->write_reg = sp_write_reg16; + break; + case IORESOURCE_MEM_8BIT: + default: + priv->read_reg = sp_read_reg8; + priv->write_reg = sp_write_reg8; + break; + } +} + +static void sp_populate_of(struct sja1000_priv *priv, struct device_node *of) +{ + int err; + u32 prop; + + err = of_property_read_u32(of, "reg-io-width", &prop); + if (err) + prop = 1; /* 8 bit is default */ + + switch (prop) { + case 4: + priv->read_reg = sp_read_reg32; + priv->write_reg = sp_write_reg32; + break; + case 2: + priv->read_reg = sp_read_reg16; + priv->write_reg = sp_write_reg16; + break; + case 1: + default: + priv->read_reg = sp_read_reg8; + priv->write_reg = sp_write_reg8; + } + + if (!priv->can.clock.freq) { + err = of_property_read_u32(of, "nxp,external-clock-frequency", &prop); + if (!err) + priv->can.clock.freq = prop / 2; + else + priv->can.clock.freq = SP_CAN_CLOCK; /* default */ + } + + err = of_property_read_u32(of, "nxp,tx-output-mode", &prop); + if (!err) + priv->ocr |= prop & OCR_MODE_MASK; + else + priv->ocr |= OCR_MODE_NORMAL; /* default */ + + err = of_property_read_u32(of, "nxp,tx-output-config", &prop); + if (!err) + priv->ocr |= (prop << OCR_TX_SHIFT) & OCR_TX_MASK; + else + priv->ocr |= OCR_TX0_PULLDOWN; /* default */ + + err = of_property_read_u32(of, "nxp,clock-out-frequency", &prop); + if (!err && prop) { + u32 divider = priv->can.clock.freq * 2 / prop; + + if (divider > 1) + priv->cdr |= divider / 2 - 1; + else + priv->cdr |= CDR_CLKOUT_MASK; + } else { + priv->cdr |= CDR_CLK_OFF; /* default */ + } + + if (!of_property_read_bool(of, "nxp,no-comparator-bypass")) + priv->cdr |= CDR_CBP; /* default */ +} + +static struct sja1000_of_data technologic_data = { + .priv_sz = sizeof(struct technologic_priv), + .init = sp_technologic_init, +}; + +static struct sja1000_of_data renesas_data = { + .init = sp_rzn1_init, +}; + +static const struct of_device_id sp_of_table[] = { + { .compatible = "nxp,sja1000", .data = NULL, }, + { .compatible = "renesas,rzn1-sja1000", .data = &renesas_data, }, + { .compatible = "technologic,sja1000", .data = &technologic_data, }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, sp_of_table); + +static int sp_probe(struct platform_device *pdev) +{ + int err, irq = 0; + void __iomem *addr; + struct net_device *dev; + struct sja1000_priv *priv; + struct resource *res_mem, *res_irq = NULL; + struct sja1000_platform_data *pdata; + struct device_node *of = pdev->dev.of_node; + const struct sja1000_of_data *of_data = NULL; + size_t priv_sz = 0; + struct clk *clk; + + pdata = dev_get_platdata(&pdev->dev); + if (!pdata && !of) { + dev_err(&pdev->dev, "No platform data provided!\n"); + return -ENODEV; + } + + res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res_mem) + return -ENODEV; + + if (!devm_request_mem_region(&pdev->dev, res_mem->start, + resource_size(res_mem), DRV_NAME)) + return -EBUSY; + + addr = devm_ioremap(&pdev->dev, res_mem->start, + resource_size(res_mem)); + if (!addr) + return -ENOMEM; + + if (of) { + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + clk = devm_clk_get_optional_enabled(&pdev->dev, NULL); + if (IS_ERR(clk)) + return dev_err_probe(&pdev->dev, PTR_ERR(clk), + "CAN clk operation failed"); + } else { + res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!res_irq) + return -ENODEV; + } + + of_data = device_get_match_data(&pdev->dev); + if (of_data) + priv_sz = of_data->priv_sz; + + dev = alloc_sja1000dev(priv_sz); + if (!dev) + return -ENOMEM; + priv = netdev_priv(dev); + + if (res_irq) { + irq = res_irq->start; + priv->irq_flags = res_irq->flags & IRQF_TRIGGER_MASK; + if (res_irq->flags & IORESOURCE_IRQ_SHAREABLE) + priv->irq_flags |= IRQF_SHARED; + } else { + priv->irq_flags = IRQF_SHARED; + } + + if (priv->flags & SJA1000_QUIRK_RESET_ON_OVERRUN) + priv->irq_flags |= IRQF_ONESHOT; + + dev->irq = irq; + priv->reg_base = addr; + + if (of) { + if (clk) { + priv->can.clock.freq = clk_get_rate(clk) / 2; + if (!priv->can.clock.freq) { + err = -EINVAL; + dev_err(&pdev->dev, "Zero CAN clk rate"); + goto exit_free; + } + } + + sp_populate_of(priv, of); + + if (of_data && of_data->init) + of_data->init(priv, of); + } else { + sp_populate(priv, pdata, res_mem->flags); + } + + platform_set_drvdata(pdev, dev); + SET_NETDEV_DEV(dev, &pdev->dev); + + err = register_sja1000dev(dev); + if (err) { + dev_err(&pdev->dev, "registering %s failed (err=%d)\n", + DRV_NAME, err); + goto exit_free; + } + + dev_info(&pdev->dev, "%s device registered (reg_base=%p, irq=%d)\n", + DRV_NAME, priv->reg_base, dev->irq); + return 0; + + exit_free: + free_sja1000dev(dev); + return err; +} + +static void sp_remove(struct platform_device *pdev) +{ + struct net_device *dev = platform_get_drvdata(pdev); + + unregister_sja1000dev(dev); + free_sja1000dev(dev); +} + +static struct platform_driver sp_driver = { + .probe = sp_probe, + .remove_new = sp_remove, + .driver = { + .name = DRV_NAME, + .of_match_table = sp_of_table, + }, +}; + +module_platform_driver(sp_driver); diff --git a/drivers/net/can/sja1000/tscan1.c b/drivers/net/can/sja1000/tscan1.c new file mode 100644 index 0000000000..f3862bed3d --- /dev/null +++ b/drivers/net/can/sja1000/tscan1.c @@ -0,0 +1,191 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * tscan1.c: driver for Technologic Systems TS-CAN1 PC104 boards + * + * Copyright 2010 Andre B. Oliveira + */ + +/* References: + * - Getting started with TS-CAN1, Technologic Systems, Feb 2022 + * https://docs.embeddedts.com/TS-CAN1 + */ + +#include +#include +#include +#include +#include +#include +#include "sja1000.h" + +MODULE_DESCRIPTION("Driver for Technologic Systems TS-CAN1 PC104 boards"); +MODULE_AUTHOR("Andre B. Oliveira "); +MODULE_LICENSE("GPL"); + +/* Maximum number of boards (one in each JP1:JP2 setting of IO address) */ +#define TSCAN1_MAXDEV 4 + +/* PLD registers address offsets */ +#define TSCAN1_ID1 0 +#define TSCAN1_ID2 1 +#define TSCAN1_VERSION 2 +#define TSCAN1_LED 3 +#define TSCAN1_PAGE 4 +#define TSCAN1_MODE 5 +#define TSCAN1_JUMPERS 6 + +/* PLD board identifier registers magic values */ +#define TSCAN1_ID1_VALUE 0xf6 +#define TSCAN1_ID2_VALUE 0xb9 + +/* PLD mode register SJA1000 IO enable bit */ +#define TSCAN1_MODE_ENABLE 0x40 + +/* PLD jumpers register bits */ +#define TSCAN1_JP4 0x10 +#define TSCAN1_JP5 0x20 + +/* PLD IO base addresses start */ +#define TSCAN1_PLD_ADDRESS 0x150 + +/* PLD register space size */ +#define TSCAN1_PLD_SIZE 8 + +/* SJA1000 register space size */ +#define TSCAN1_SJA1000_SIZE 32 + +/* SJA1000 crystal frequency (16MHz) */ +#define TSCAN1_SJA1000_XTAL 16000000 + +/* SJA1000 IO base addresses */ +static const unsigned short tscan1_sja1000_addresses[] = { + 0x100, 0x120, 0x180, 0x1a0, 0x200, 0x240, 0x280, 0x320 +}; + +/* Read SJA1000 register */ +static u8 tscan1_read(const struct sja1000_priv *priv, int reg) +{ + return inb((unsigned long)priv->reg_base + reg); +} + +/* Write SJA1000 register */ +static void tscan1_write(const struct sja1000_priv *priv, int reg, u8 val) +{ + outb(val, (unsigned long)priv->reg_base + reg); +} + +/* Probe for a TS-CAN1 board with JP2:JP1 jumper setting ID */ +static int tscan1_probe(struct device *dev, unsigned id) +{ + struct net_device *netdev; + struct sja1000_priv *priv; + unsigned long pld_base, sja1000_base; + int irq, i; + + pld_base = TSCAN1_PLD_ADDRESS + id * TSCAN1_PLD_SIZE; + if (!request_region(pld_base, TSCAN1_PLD_SIZE, dev_name(dev))) + return -EBUSY; + + if (inb(pld_base + TSCAN1_ID1) != TSCAN1_ID1_VALUE || + inb(pld_base + TSCAN1_ID2) != TSCAN1_ID2_VALUE) { + release_region(pld_base, TSCAN1_PLD_SIZE); + return -ENODEV; + } + + switch (inb(pld_base + TSCAN1_JUMPERS) & (TSCAN1_JP4 | TSCAN1_JP5)) { + case TSCAN1_JP4: + irq = 6; + break; + case TSCAN1_JP5: + irq = 7; + break; + case TSCAN1_JP4 | TSCAN1_JP5: + irq = 5; + break; + default: + dev_err(dev, "invalid JP4:JP5 setting (no IRQ)\n"); + release_region(pld_base, TSCAN1_PLD_SIZE); + return -EINVAL; + } + + netdev = alloc_sja1000dev(0); + if (!netdev) { + release_region(pld_base, TSCAN1_PLD_SIZE); + return -ENOMEM; + } + + dev_set_drvdata(dev, netdev); + SET_NETDEV_DEV(netdev, dev); + + netdev->base_addr = pld_base; + netdev->irq = irq; + + priv = netdev_priv(netdev); + priv->read_reg = tscan1_read; + priv->write_reg = tscan1_write; + priv->can.clock.freq = TSCAN1_SJA1000_XTAL / 2; + priv->cdr = CDR_CBP | CDR_CLK_OFF; + priv->ocr = OCR_TX0_PUSHPULL; + + /* Select the first SJA1000 IO address that is free and that works */ + for (i = 0; i < ARRAY_SIZE(tscan1_sja1000_addresses); i++) { + sja1000_base = tscan1_sja1000_addresses[i]; + if (!request_region(sja1000_base, TSCAN1_SJA1000_SIZE, + dev_name(dev))) + continue; + + /* Set SJA1000 IO base address and enable it */ + outb(TSCAN1_MODE_ENABLE | i, pld_base + TSCAN1_MODE); + + priv->reg_base = (void __iomem *)sja1000_base; + if (!register_sja1000dev(netdev)) { + /* SJA1000 probe succeeded; turn LED off and return */ + outb(0, pld_base + TSCAN1_LED); + netdev_info(netdev, "TS-CAN1 at 0x%lx 0x%lx irq %d\n", + pld_base, sja1000_base, irq); + return 0; + } + + /* SJA1000 probe failed; release and try next address */ + outb(0, pld_base + TSCAN1_MODE); + release_region(sja1000_base, TSCAN1_SJA1000_SIZE); + } + + dev_err(dev, "failed to assign SJA1000 IO address\n"); + dev_set_drvdata(dev, NULL); + free_sja1000dev(netdev); + release_region(pld_base, TSCAN1_PLD_SIZE); + return -ENXIO; +} + +static void tscan1_remove(struct device *dev, unsigned id /*unused*/) +{ + struct net_device *netdev; + struct sja1000_priv *priv; + unsigned long pld_base, sja1000_base; + + netdev = dev_get_drvdata(dev); + unregister_sja1000dev(netdev); + dev_set_drvdata(dev, NULL); + + priv = netdev_priv(netdev); + pld_base = netdev->base_addr; + sja1000_base = (unsigned long)priv->reg_base; + + outb(0, pld_base + TSCAN1_MODE); /* disable SJA1000 IO space */ + + release_region(sja1000_base, TSCAN1_SJA1000_SIZE); + release_region(pld_base, TSCAN1_PLD_SIZE); + + free_sja1000dev(netdev); +} + +static struct isa_driver tscan1_isa_driver = { + .probe = tscan1_probe, + .remove = tscan1_remove, + .driver = { + .name = "tscan1", + }, +}; + +module_isa_driver(tscan1_isa_driver, TSCAN1_MAXDEV); -- cgit v1.2.3