From 94ac2ab3fff96814d7460a27a0e9d004abbd4128 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Wed, 19 Jun 2024 23:00:37 +0200 Subject: Merging upstream version 6.9.2. Signed-off-by: Daniel Baumann --- drivers/net/dsa/mt7530.c | 564 ++++++++++++++++------------------------------- 1 file changed, 190 insertions(+), 374 deletions(-) (limited to 'drivers/net/dsa/mt7530.c') diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index e48ef9823c..8090390eda 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -414,92 +414,57 @@ mt753x_preferred_default_local_cpu_port(struct dsa_switch *ds) } /* Setup port 6 interface mode and TRGMII TX circuit */ -static int -mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface) +static void +mt7530_setup_port6(struct dsa_switch *ds, phy_interface_t interface) { struct mt7530_priv *priv = ds->priv; - u32 ncpo1, ssc_delta, trgint, xtal; - - xtal = mt7530_read(priv, MT7530_MHWTRAP) & HWTRAP_XTAL_MASK; + u32 ncpo1, ssc_delta, xtal; - if (xtal == HWTRAP_XTAL_20MHZ) { - dev_err(priv->dev, - "%s: MT7530 with a 20MHz XTAL is not supported!\n", - __func__); - return -EINVAL; - } + /* Disable the MT7530 TRGMII clocks */ + core_clear(priv, CORE_TRGMII_GSW_CLK_CG, REG_TRGMIICK_EN); - switch (interface) { - case PHY_INTERFACE_MODE_RGMII: - trgint = 0; - break; - case PHY_INTERFACE_MODE_TRGMII: - trgint = 1; - if (xtal == HWTRAP_XTAL_25MHZ) - ssc_delta = 0x57; - else - ssc_delta = 0x87; - if (priv->id == ID_MT7621) { - /* PLL frequency: 125MHz: 1.0GBit */ - if (xtal == HWTRAP_XTAL_40MHZ) - ncpo1 = 0x0640; - if (xtal == HWTRAP_XTAL_25MHZ) - ncpo1 = 0x0a00; - } else { /* PLL frequency: 250MHz: 2.0Gbit */ - if (xtal == HWTRAP_XTAL_40MHZ) - ncpo1 = 0x0c80; - if (xtal == HWTRAP_XTAL_25MHZ) - ncpo1 = 0x1400; - } - break; - default: - dev_err(priv->dev, "xMII interface %d not supported\n", - interface); - return -EINVAL; + if (interface == PHY_INTERFACE_MODE_RGMII) { + mt7530_rmw(priv, MT7530_P6ECR, P6_INTF_MODE_MASK, + P6_INTF_MODE(0)); + return; } - mt7530_rmw(priv, MT7530_P6ECR, P6_INTF_MODE_MASK, - P6_INTF_MODE(trgint)); + mt7530_rmw(priv, MT7530_P6ECR, P6_INTF_MODE_MASK, P6_INTF_MODE(1)); - if (trgint) { - /* Disable the MT7530 TRGMII clocks */ - core_clear(priv, CORE_TRGMII_GSW_CLK_CG, REG_TRGMIICK_EN); + xtal = mt7530_read(priv, MT7530_MHWTRAP) & HWTRAP_XTAL_MASK; - /* Setup the MT7530 TRGMII Tx Clock */ - core_write(priv, CORE_PLL_GROUP5, RG_LCDDS_PCW_NCPO1(ncpo1)); - core_write(priv, CORE_PLL_GROUP6, RG_LCDDS_PCW_NCPO0(0)); - core_write(priv, CORE_PLL_GROUP10, RG_LCDDS_SSC_DELTA(ssc_delta)); - core_write(priv, CORE_PLL_GROUP11, RG_LCDDS_SSC_DELTA1(ssc_delta)); - core_write(priv, CORE_PLL_GROUP4, - RG_SYSPLL_DDSFBK_EN | RG_SYSPLL_BIAS_EN | - RG_SYSPLL_BIAS_LPF_EN); - core_write(priv, CORE_PLL_GROUP2, - RG_SYSPLL_EN_NORMAL | RG_SYSPLL_VODEN | - RG_SYSPLL_POSDIV(1)); - core_write(priv, CORE_PLL_GROUP7, - RG_LCDDS_PCW_NCPO_CHG | RG_LCCDS_C(3) | - RG_LCDDS_PWDB | RG_LCDDS_ISO_EN); + if (xtal == HWTRAP_XTAL_25MHZ) + ssc_delta = 0x57; + else + ssc_delta = 0x87; - /* Enable the MT7530 TRGMII clocks */ - core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_TRGMIICK_EN); + if (priv->id == ID_MT7621) { + /* PLL frequency: 125MHz: 1.0GBit */ + if (xtal == HWTRAP_XTAL_40MHZ) + ncpo1 = 0x0640; + if (xtal == HWTRAP_XTAL_25MHZ) + ncpo1 = 0x0a00; + } else { /* PLL frequency: 250MHz: 2.0Gbit */ + if (xtal == HWTRAP_XTAL_40MHZ) + ncpo1 = 0x0c80; + if (xtal == HWTRAP_XTAL_25MHZ) + ncpo1 = 0x1400; } - return 0; -} - -static bool mt7531_dual_sgmii_supported(struct mt7530_priv *priv) -{ - u32 val; - - val = mt7530_read(priv, MT7531_TOP_SIG_SR); - - return (val & PAD_DUAL_SGMII_EN) != 0; -} + /* Setup the MT7530 TRGMII Tx Clock */ + core_write(priv, CORE_PLL_GROUP5, RG_LCDDS_PCW_NCPO1(ncpo1)); + core_write(priv, CORE_PLL_GROUP6, RG_LCDDS_PCW_NCPO0(0)); + core_write(priv, CORE_PLL_GROUP10, RG_LCDDS_SSC_DELTA(ssc_delta)); + core_write(priv, CORE_PLL_GROUP11, RG_LCDDS_SSC_DELTA1(ssc_delta)); + core_write(priv, CORE_PLL_GROUP4, RG_SYSPLL_DDSFBK_EN | + RG_SYSPLL_BIAS_EN | RG_SYSPLL_BIAS_LPF_EN); + core_write(priv, CORE_PLL_GROUP2, RG_SYSPLL_EN_NORMAL | + RG_SYSPLL_VODEN | RG_SYSPLL_POSDIV(1)); + core_write(priv, CORE_PLL_GROUP7, RG_LCDDS_PCW_NCPO_CHG | + RG_LCCDS_C(3) | RG_LCDDS_PWDB | RG_LCDDS_ISO_EN); -static int -mt7531_pad_setup(struct dsa_switch *ds, phy_interface_t interface) -{ - return 0; + /* Enable the MT7530 TRGMII clocks */ + core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_TRGMIICK_EN); } static void @@ -510,9 +475,6 @@ mt7531_pll_setup(struct mt7530_priv *priv) u32 xtal; u32 val; - if (mt7531_dual_sgmii_supported(priv)) - return; - val = mt7530_read(priv, MT7531_CREV); top_sig = mt7530_read(priv, MT7531_TOP_SIG_SR); hwstrap = mt7530_read(priv, MT7531_HWTRAP); @@ -920,8 +882,6 @@ static const char *p5_intf_modes(unsigned int p5_interface) return "PHY P4"; case P5_INTF_SEL_GMAC5: return "GMAC5"; - case P5_INTF_SEL_GMAC5_SGMII: - return "GMAC5_SGMII"; default: return "unknown"; } @@ -956,13 +916,8 @@ static void mt7530_setup_port5(struct dsa_switch *ds, phy_interface_t interface) /* MT7530_P5_MODE_GMAC: P5 -> External phy or 2nd GMAC */ val &= ~MHWTRAP_P5_DIS; break; - case P5_DISABLED: - interface = PHY_INTERFACE_MODE_NA; - break; default: - dev_err(ds->dev, "Unsupported p5_intf_sel %d\n", - priv->p5_intf_sel); - goto unlock_exit; + break; } /* Setup RGMII settings */ @@ -992,9 +947,6 @@ static void mt7530_setup_port5(struct dsa_switch *ds, phy_interface_t interface) dev_dbg(ds->dev, "Setup P5, HWTRAP=0x%x, intf_sel=%s, phy-mode=%s\n", val, p5_intf_modes(priv->p5_intf_sel), phy_modes(interface)); - priv->p5_interface = interface; - -unlock_exit: mutex_unlock(&priv->reg_mutex); } @@ -1211,18 +1163,10 @@ mt753x_trap_frames(struct mt7530_priv *priv) MT753X_BPDU_CPU_ONLY); } -static int +static void mt753x_cpu_port_enable(struct dsa_switch *ds, int port) { struct mt7530_priv *priv = ds->priv; - int ret; - - /* Setup max capability of CPU port at first */ - if (priv->info->cpu_port_config) { - ret = priv->info->cpu_port_config(ds, port); - if (ret) - return ret; - } /* Enable Mediatek header mode on the cpu port */ mt7530_write(priv, MT7530_PVC_P(port), @@ -1232,10 +1176,6 @@ mt753x_cpu_port_enable(struct dsa_switch *ds, int port) mt7530_set(priv, MT7530_MFC, BC_FFP(BIT(port)) | UNM_FFP(BIT(port)) | UNU_FFP(BIT(port))); - /* Set CPU port number */ - if (priv->id == ID_MT7530 || priv->id == ID_MT7621) - mt7530_rmw(priv, MT7530_MFC, CPU_MASK, CPU_EN | CPU_PORT(port)); - /* Add the CPU port to the CPU port bitmap for MT7531 and the switch on * the MT7988 SoC. Trapped frames will be forwarded to the CPU port that * is affine to the inbound user port. @@ -1252,8 +1192,6 @@ mt753x_cpu_port_enable(struct dsa_switch *ds, int port) /* Set to fallback mode for independent VLAN learning */ mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK, MT7530_PORT_FALLBACK_MODE); - - return 0; } static int @@ -1277,7 +1215,6 @@ mt7530_port_enable(struct dsa_switch *ds, int port, priv->ports[port].enable = true; mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK, priv->ports[port].pm); - mt7530_clear(priv, MT7530_PMCR_P(port), PMCR_LINK_SETTINGS_MASK); mutex_unlock(&priv->reg_mutex); @@ -1297,7 +1234,6 @@ mt7530_port_disable(struct dsa_switch *ds, int port) priv->ports[port].enable = false; mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK, PCR_MATRIX_CLR); - mt7530_clear(priv, MT7530_PMCR_P(port), PMCR_LINK_SETTINGS_MASK); mutex_unlock(&priv->reg_mutex); } @@ -2306,7 +2242,7 @@ mt7530_setup_irq(struct mt7530_priv *priv) } /* This register must be set for MT7530 to properly fire interrupts */ - if (priv->id != ID_MT7531) + if (priv->id == ID_MT7530 || priv->id == ID_MT7621) mt7530_set(priv, MT7530_TOP_SIG_CTRL, TOP_SIG_CTRL_NORMAL); ret = request_threaded_irq(priv->irq, NULL, mt7530_irq_thread_fn, @@ -2345,24 +2281,40 @@ mt7530_free_irq_common(struct mt7530_priv *priv) static void mt7530_free_irq(struct mt7530_priv *priv) { - mt7530_free_mdio_irq(priv); + struct device_node *mnp, *np = priv->dev->of_node; + + mnp = of_get_child_by_name(np, "mdio"); + if (!mnp) + mt7530_free_mdio_irq(priv); + of_node_put(mnp); + mt7530_free_irq_common(priv); } static int mt7530_setup_mdio(struct mt7530_priv *priv) { + struct device_node *mnp, *np = priv->dev->of_node; struct dsa_switch *ds = priv->ds; struct device *dev = priv->dev; struct mii_bus *bus; static int idx; - int ret; + int ret = 0; + + mnp = of_get_child_by_name(np, "mdio"); + + if (mnp && !of_device_is_available(mnp)) + goto out; bus = devm_mdiobus_alloc(dev); - if (!bus) - return -ENOMEM; + if (!bus) { + ret = -ENOMEM; + goto out; + } + + if (!mnp) + ds->user_mii_bus = bus; - ds->user_mii_bus = bus; bus->priv = priv; bus->name = KBUILD_MODNAME "-mii"; snprintf(bus->id, MII_BUS_ID_SIZE, KBUILD_MODNAME "-%d", idx++); @@ -2373,16 +2325,18 @@ mt7530_setup_mdio(struct mt7530_priv *priv) bus->parent = dev; bus->phy_mask = ~ds->phys_mii_mask; - if (priv->irq) + if (priv->irq && !mnp) mt7530_setup_mdio_irq(priv); - ret = devm_mdiobus_register(dev, bus); + ret = devm_of_mdiobus_register(dev, bus, mnp); if (ret) { dev_err(dev, "failed to register MDIO bus: %d\n", ret); - if (priv->irq) + if (priv->irq && !mnp) mt7530_free_mdio_irq(priv); } +out: + of_node_put(mnp); return ret; } @@ -2466,6 +2420,12 @@ mt7530_setup(struct dsa_switch *ds) return -ENODEV; } + if ((val & HWTRAP_XTAL_MASK) == HWTRAP_XTAL_20MHZ) { + dev_err(priv->dev, + "MT7530 with a 20MHz XTAL is not supported!\n"); + return -EINVAL; + } + /* Reset the switch through internal reset */ mt7530_write(priv, MT7530_SYS_CTRL, SYS_CTRL_PHY_RST | SYS_CTRL_SW_RST | @@ -2486,8 +2446,6 @@ mt7530_setup(struct dsa_switch *ds) val |= MHWTRAP_MANUAL; mt7530_write(priv, MT7530_MHWTRAP, val); - priv->p6_interface = PHY_INTERFACE_MODE_NA; - if ((val & HWTRAP_XTAL_MASK) == HWTRAP_XTAL_40MHZ) mt7530_pll_setup(priv); @@ -2497,6 +2455,12 @@ mt7530_setup(struct dsa_switch *ds) mt7530_mib_reset(ds); for (i = 0; i < MT7530_NUM_PORTS; i++) { + /* Clear link settings and enable force mode to force link down + * on all ports until they're enabled later. + */ + mt7530_rmw(priv, MT7530_PMCR_P(i), PMCR_LINK_SETTINGS_MASK | + PMCR_FORCE_MODE, PMCR_FORCE_MODE); + /* Disable forwarding by default on all ports */ mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK, PCR_MATRIX_CLR); @@ -2505,9 +2469,7 @@ mt7530_setup(struct dsa_switch *ds) mt7530_set(priv, MT7530_PSC_P(i), SA_DIS); if (dsa_is_cpu_port(ds, i)) { - ret = mt753x_cpu_port_enable(ds, i); - if (ret) - return ret; + mt753x_cpu_port_enable(ds, i); } else { mt7530_port_disable(ds, i); @@ -2529,16 +2491,13 @@ mt7530_setup(struct dsa_switch *ds) return ret; /* Setup port 5 */ - priv->p5_intf_sel = P5_DISABLED; - interface = PHY_INTERFACE_MODE_NA; - if (!dsa_is_unused_port(ds, 5)) { priv->p5_intf_sel = P5_INTF_SEL_GMAC5; - ret = of_get_phy_mode(dsa_to_port(ds, 5)->dn, &interface); - if (ret && ret != -ENODEV) - return ret; } else { - /* Scan the ethernet nodes. look for GMAC1, lookup used phy */ + /* Scan the ethernet nodes. Look for GMAC1, lookup the used PHY. + * Set priv->p5_intf_sel to the appropriate value if PHY muxing + * is detected. + */ for_each_child_of_node(dn, mac_np) { if (!of_device_is_compatible(mac_np, "mediatek,eth-mac")) @@ -2569,6 +2528,10 @@ mt7530_setup(struct dsa_switch *ds) of_node_put(phy_node); break; } + + if (priv->p5_intf_sel == P5_INTF_SEL_PHY_P0 || + priv->p5_intf_sel == P5_INTF_SEL_PHY_P4) + mt7530_setup_port5(ds, interface); } #ifdef CONFIG_GPIOLIB @@ -2579,8 +2542,6 @@ mt7530_setup(struct dsa_switch *ds) } #endif /* CONFIG_GPIOLIB */ - mt7530_setup_port5(ds, interface); - /* Flush the FDB table */ ret = mt7530_fdb_cmd(priv, MT7530_FDB_FLUSH, NULL); if (ret < 0) @@ -2605,6 +2566,12 @@ mt7531_setup_common(struct dsa_switch *ds) UNU_FFP_MASK); for (i = 0; i < MT7530_NUM_PORTS; i++) { + /* Clear link settings and enable force mode to force link down + * on all ports until they're enabled later. + */ + mt7530_rmw(priv, MT7530_PMCR_P(i), PMCR_LINK_SETTINGS_MASK | + MT7531_FORCE_MODE, MT7531_FORCE_MODE); + /* Disable forwarding by default on all ports */ mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK, PCR_MATRIX_CLR); @@ -2615,9 +2582,7 @@ mt7531_setup_common(struct dsa_switch *ds) mt7530_set(priv, MT7531_DBG_CNT(i), MT7531_DIS_CLR); if (dsa_is_cpu_port(ds, i)) { - ret = mt753x_cpu_port_enable(ds, i); - if (ret) - return ret; + mt753x_cpu_port_enable(ds, i); } else { mt7530_port_disable(ds, i); @@ -2680,38 +2645,35 @@ mt7531_setup(struct dsa_switch *ds) return -ENODEV; } - /* all MACs must be forced link-down before sw reset */ + /* MT7531AE has got two SGMII units. One for port 5, one for port 6. + * MT7531BE has got only one SGMII unit which is for port 6. + */ + val = mt7530_read(priv, MT7531_TOP_SIG_SR); + priv->p5_sgmii = !!(val & PAD_DUAL_SGMII_EN); + + /* Force link down on all ports before internal reset */ for (i = 0; i < MT7530_NUM_PORTS; i++) mt7530_write(priv, MT7530_PMCR_P(i), MT7531_FORCE_LNK); /* Reset the switch through internal reset */ - mt7530_write(priv, MT7530_SYS_CTRL, - SYS_CTRL_PHY_RST | SYS_CTRL_SW_RST | - SYS_CTRL_REG_RST); - - mt7531_pll_setup(priv); - - if (mt7531_dual_sgmii_supported(priv)) { - priv->p5_intf_sel = P5_INTF_SEL_GMAC5_SGMII; + mt7530_write(priv, MT7530_SYS_CTRL, SYS_CTRL_SW_RST | SYS_CTRL_REG_RST); + if (!priv->p5_sgmii) { + mt7531_pll_setup(priv); + } else { /* Let ds->user_mii_bus be able to access external phy. */ mt7530_rmw(priv, MT7531_GPIO_MODE1, MT7531_GPIO11_RG_RXD2_MASK, MT7531_EXT_P_MDC_11); mt7530_rmw(priv, MT7531_GPIO_MODE1, MT7531_GPIO12_RG_RXD3_MASK, MT7531_EXT_P_MDIO_12); - } else { - priv->p5_intf_sel = P5_INTF_SEL_GMAC5; } - dev_dbg(ds->dev, "P5 support %s interface\n", - p5_intf_modes(priv->p5_intf_sel)); + + if (!dsa_is_unused_port(ds, 5)) + priv->p5_intf_sel = P5_INTF_SEL_GMAC5; mt7530_rmw(priv, MT7531_GPIO_MODE0, MT7531_GPIO0_MASK, MT7531_GPIO0_INTERRUPT); - /* Let phylink decide the interface later. */ - priv->p5_interface = PHY_INTERFACE_MODE_NA; - priv->p6_interface = PHY_INTERFACE_MODE_NA; - /* Enable Energy-Efficient Ethernet (EEE) and PHY core PLL, since * phy_device has not yet been created provided for * phy_[read,write]_mmd_indirect is called, we provide our own @@ -2748,12 +2710,14 @@ static void mt7530_mac_port_get_caps(struct dsa_switch *ds, int port, struct phylink_config *config) { switch (port) { - case 0 ... 4: /* Internal phy */ + /* Ports which are connected to switch PHYs. There is no MII pinout. */ + case 0 ... 4: __set_bit(PHY_INTERFACE_MODE_GMII, config->supported_interfaces); break; - case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */ + /* Port 5 supports rgmii with delays, mii, and gmii. */ + case 5: phy_interface_set_rgmii(config->supported_interfaces); __set_bit(PHY_INTERFACE_MODE_MII, config->supported_interfaces); @@ -2761,7 +2725,8 @@ static void mt7530_mac_port_get_caps(struct dsa_switch *ds, int port, config->supported_interfaces); break; - case 6: /* 1st cpu port */ + /* Port 6 supports rgmii and trgmii. */ + case 6: __set_bit(PHY_INTERFACE_MODE_RGMII, config->supported_interfaces); __set_bit(PHY_INTERFACE_MODE_TRGMII, @@ -2770,30 +2735,30 @@ static void mt7530_mac_port_get_caps(struct dsa_switch *ds, int port, } } -static bool mt7531_is_rgmii_port(struct mt7530_priv *priv, u32 port) -{ - return (port == 5) && (priv->p5_intf_sel != P5_INTF_SEL_GMAC5_SGMII); -} - static void mt7531_mac_port_get_caps(struct dsa_switch *ds, int port, struct phylink_config *config) { struct mt7530_priv *priv = ds->priv; switch (port) { - case 0 ... 4: /* Internal phy */ + /* Ports which are connected to switch PHYs. There is no MII pinout. */ + case 0 ... 4: __set_bit(PHY_INTERFACE_MODE_GMII, config->supported_interfaces); break; - case 5: /* 2nd cpu port supports either rgmii or sgmii/8023z */ - if (mt7531_is_rgmii_port(priv, port)) { + /* Port 5 supports rgmii with delays on MT7531BE, sgmii/802.3z on + * MT7531AE. + */ + case 5: + if (!priv->p5_sgmii) { phy_interface_set_rgmii(config->supported_interfaces); break; } fallthrough; - case 6: /* 1st cpu port supports sgmii/8023z only */ + /* Port 6 supports sgmii/802.3z. */ + case 6: __set_bit(PHY_INTERFACE_MODE_SGMII, config->supported_interfaces); __set_bit(PHY_INTERFACE_MODE_1000BASEX, @@ -2809,14 +2774,14 @@ static void mt7531_mac_port_get_caps(struct dsa_switch *ds, int port, static void mt7988_mac_port_get_caps(struct dsa_switch *ds, int port, struct phylink_config *config) { - phy_interface_zero(config->supported_interfaces); - switch (port) { - case 0 ... 4: /* Internal phy */ + /* Ports which are connected to switch PHYs. There is no MII pinout. */ + case 0 ... 3: __set_bit(PHY_INTERFACE_MODE_INTERNAL, config->supported_interfaces); break; + /* Port 6 is connected to SoC's XGMII MAC. There is no MII pinout. */ case 6: __set_bit(PHY_INTERFACE_MODE_INTERNAL, config->supported_interfaces); @@ -2825,41 +2790,24 @@ static void mt7988_mac_port_get_caps(struct dsa_switch *ds, int port, } } -static int -mt753x_pad_setup(struct dsa_switch *ds, const struct phylink_link_state *state) -{ - struct mt7530_priv *priv = ds->priv; - - return priv->info->pad_setup(ds, state->interface); -} - -static int +static void mt7530_mac_config(struct dsa_switch *ds, int port, unsigned int mode, phy_interface_t interface) { struct mt7530_priv *priv = ds->priv; - /* Only need to setup port5. */ - if (port != 5) - return 0; - - mt7530_setup_port5(priv->ds, interface); - - return 0; + if (port == 5) + mt7530_setup_port5(priv->ds, interface); + else if (port == 6) + mt7530_setup_port6(priv->ds, interface); } -static int mt7531_rgmii_setup(struct mt7530_priv *priv, u32 port, - phy_interface_t interface, - struct phy_device *phydev) +static void mt7531_rgmii_setup(struct mt7530_priv *priv, u32 port, + phy_interface_t interface, + struct phy_device *phydev) { u32 val; - if (!mt7531_is_rgmii_port(priv, port)) { - dev_err(priv->dev, "RGMII mode is not available for port %d\n", - port); - return -EINVAL; - } - val = mt7530_read(priv, MT7531_CLKGEN_CTRL); val |= GP_CLK_EN; val &= ~GP_MODE_MASK; @@ -2887,31 +2835,14 @@ static int mt7531_rgmii_setup(struct mt7530_priv *priv, u32 port, case PHY_INTERFACE_MODE_RGMII_ID: break; default: - return -EINVAL; + break; } } - mt7530_write(priv, MT7531_CLKGEN_CTRL, val); - - return 0; -} -static bool mt753x_is_mac_port(u32 port) -{ - return (port == 5 || port == 6); -} - -static int -mt7988_mac_config(struct dsa_switch *ds, int port, unsigned int mode, - phy_interface_t interface) -{ - if (dsa_is_cpu_port(ds, port) && - interface == PHY_INTERFACE_MODE_INTERNAL) - return 0; - - return -EINVAL; + mt7530_write(priv, MT7531_CLKGEN_CTRL, val); } -static int +static void mt7531_mac_config(struct dsa_switch *ds, int port, unsigned int mode, phy_interface_t interface) { @@ -2919,39 +2850,11 @@ mt7531_mac_config(struct dsa_switch *ds, int port, unsigned int mode, struct phy_device *phydev; struct dsa_port *dp; - if (!mt753x_is_mac_port(port)) { - dev_err(priv->dev, "port %d is not a MAC port\n", port); - return -EINVAL; - } - - switch (interface) { - case PHY_INTERFACE_MODE_RGMII: - case PHY_INTERFACE_MODE_RGMII_ID: - case PHY_INTERFACE_MODE_RGMII_RXID: - case PHY_INTERFACE_MODE_RGMII_TXID: + if (phy_interface_mode_is_rgmii(interface)) { dp = dsa_to_port(ds, port); phydev = dp->user->phydev; - return mt7531_rgmii_setup(priv, port, interface, phydev); - case PHY_INTERFACE_MODE_SGMII: - case PHY_INTERFACE_MODE_NA: - case PHY_INTERFACE_MODE_1000BASEX: - case PHY_INTERFACE_MODE_2500BASEX: - /* handled in SGMII PCS driver */ - return 0; - default: - return -EINVAL; + mt7531_rgmii_setup(priv, port, interface, phydev); } - - return -EINVAL; -} - -static int -mt753x_mac_config(struct dsa_switch *ds, int port, unsigned int mode, - const struct phylink_link_state *state) -{ - struct mt7530_priv *priv = ds->priv; - - return priv->info->mac_port_config(ds, port, mode, state->interface); } static struct phylink_pcs * @@ -2977,54 +2880,13 @@ mt753x_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode, const struct phylink_link_state *state) { struct mt7530_priv *priv = ds->priv; - u32 mcr_cur, mcr_new; - - switch (port) { - case 0 ... 4: /* Internal phy */ - if (state->interface != PHY_INTERFACE_MODE_GMII && - state->interface != PHY_INTERFACE_MODE_INTERNAL) - goto unsupported; - break; - case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */ - if (priv->p5_interface == state->interface) - break; - - if (mt753x_mac_config(ds, port, mode, state) < 0) - goto unsupported; - - if (priv->p5_intf_sel != P5_DISABLED) - priv->p5_interface = state->interface; - break; - case 6: /* 1st cpu port */ - if (priv->p6_interface == state->interface) - break; - - mt753x_pad_setup(ds, state); - if (mt753x_mac_config(ds, port, mode, state) < 0) - goto unsupported; - - priv->p6_interface = state->interface; - break; - default: -unsupported: - dev_err(ds->dev, "%s: unsupported %s port: %i\n", - __func__, phy_modes(state->interface), port); - return; - } - - mcr_cur = mt7530_read(priv, MT7530_PMCR_P(port)); - mcr_new = mcr_cur; - mcr_new &= ~PMCR_LINK_SETTINGS_MASK; - mcr_new |= PMCR_IFG_XMIT(1) | PMCR_MAC_MODE | PMCR_BACKOFF_EN | - PMCR_BACKPR_EN | PMCR_FORCE_MODE_ID(priv->id); + if ((port == 5 || port == 6) && priv->info->mac_port_config) + priv->info->mac_port_config(ds, port, mode, state->interface); /* Are we connected to external phy */ if (port == 5 && dsa_is_user_port(ds, 5)) - mcr_new |= PMCR_EXT_PHY; - - if (mcr_new != mcr_cur) - mt7530_write(priv, MT7530_PMCR_P(port), mcr_new); + mt7530_set(priv, MT7530_PMCR_P(port), PMCR_EXT_PHY); } static void mt753x_phylink_mac_link_down(struct dsa_switch *ds, int port, @@ -3048,17 +2910,10 @@ static void mt753x_phylink_mac_link_up(struct dsa_switch *ds, int port, mcr = PMCR_RX_EN | PMCR_TX_EN | PMCR_FORCE_LNK; - /* MT753x MAC works in 1G full duplex mode for all up-clocked - * variants. - */ - if (interface == PHY_INTERFACE_MODE_TRGMII || - (phy_interface_mode_is_8023z(interface))) { - speed = SPEED_1000; - duplex = DUPLEX_FULL; - } - switch (speed) { case SPEED_1000: + case SPEED_2500: + case SPEED_10000: mcr |= PMCR_FORCE_SPEED_1000; break; case SPEED_100: @@ -3076,6 +2931,7 @@ static void mt753x_phylink_mac_link_up(struct dsa_switch *ds, int port, if (mode == MLO_AN_PHY && phydev && phy_init_eee(phydev, false) >= 0) { switch (speed) { case SPEED_1000: + case SPEED_2500: mcr |= PMCR_FORCE_EEE1G; break; case SPEED_100: @@ -3087,63 +2943,6 @@ static void mt753x_phylink_mac_link_up(struct dsa_switch *ds, int port, mt7530_set(priv, MT7530_PMCR_P(port), mcr); } -static int -mt7531_cpu_port_config(struct dsa_switch *ds, int port) -{ - struct mt7530_priv *priv = ds->priv; - phy_interface_t interface; - int speed; - int ret; - - switch (port) { - case 5: - if (mt7531_is_rgmii_port(priv, port)) - interface = PHY_INTERFACE_MODE_RGMII; - else - interface = PHY_INTERFACE_MODE_2500BASEX; - - priv->p5_interface = interface; - break; - case 6: - interface = PHY_INTERFACE_MODE_2500BASEX; - - priv->p6_interface = interface; - break; - default: - return -EINVAL; - } - - if (interface == PHY_INTERFACE_MODE_2500BASEX) - speed = SPEED_2500; - else - speed = SPEED_1000; - - ret = mt7531_mac_config(ds, port, MLO_AN_FIXED, interface); - if (ret) - return ret; - mt7530_write(priv, MT7530_PMCR_P(port), - PMCR_CPU_PORT_SETTING(priv->id)); - mt753x_phylink_mac_link_up(ds, port, MLO_AN_FIXED, interface, NULL, - speed, DUPLEX_FULL, true, true); - - return 0; -} - -static int -mt7988_cpu_port_config(struct dsa_switch *ds, int port) -{ - struct mt7530_priv *priv = ds->priv; - - mt7530_write(priv, MT7530_PMCR_P(port), - PMCR_CPU_PORT_SETTING(priv->id)); - - mt753x_phylink_mac_link_up(ds, port, MLO_AN_FIXED, - PHY_INTERFACE_MODE_INTERNAL, NULL, - SPEED_10000, DUPLEX_FULL, true, true); - - return 0; -} - static void mt753x_phylink_get_caps(struct dsa_switch *ds, int port, struct phylink_config *config) { @@ -3226,17 +3025,9 @@ static int mt753x_setup(struct dsa_switch *ds) { struct mt7530_priv *priv = ds->priv; - int i, ret; - - /* Initialise the PCS devices */ - for (i = 0; i < priv->ds->num_ports; i++) { - priv->pcs[i].pcs.ops = priv->info->pcs_ops; - priv->pcs[i].pcs.neg_mode = true; - priv->pcs[i].priv = priv; - priv->pcs[i].port = i; - } + int ret = priv->info->sw_setup(ds); + int i; - ret = priv->info->sw_setup(ds); if (ret) return ret; @@ -3248,8 +3039,16 @@ mt753x_setup(struct dsa_switch *ds) if (ret && priv->irq) mt7530_free_irq_common(priv); + /* Initialise the PCS devices */ + for (i = 0; i < priv->ds->num_ports; i++) { + priv->pcs[i].pcs.ops = priv->info->pcs_ops; + priv->pcs[i].pcs.neg_mode = true; + priv->pcs[i].priv = priv; + priv->pcs[i].port = i; + } + if (priv->create_sgmii) { - ret = priv->create_sgmii(priv, mt7531_dual_sgmii_supported(priv)); + ret = priv->create_sgmii(priv); if (ret && priv->irq) mt7530_free_irq(priv); } @@ -3258,7 +3057,7 @@ mt753x_setup(struct dsa_switch *ds) } static int mt753x_get_mac_eee(struct dsa_switch *ds, int port, - struct ethtool_eee *e) + struct ethtool_keee *e) { struct mt7530_priv *priv = ds->priv; u32 eeecr = mt7530_read(priv, MT7530_PMEEECR_P(port)); @@ -3270,7 +3069,7 @@ static int mt753x_get_mac_eee(struct dsa_switch *ds, int port, } static int mt753x_set_mac_eee(struct dsa_switch *ds, int port, - struct ethtool_eee *e) + struct ethtool_keee *e) { struct mt7530_priv *priv = ds->priv; u32 set, mask = LPI_THRESH_MASK | LPI_MODE_EN; @@ -3287,9 +3086,34 @@ static int mt753x_set_mac_eee(struct dsa_switch *ds, int port, return 0; } -static int mt7988_pad_setup(struct dsa_switch *ds, phy_interface_t interface) +static void +mt753x_conduit_state_change(struct dsa_switch *ds, + const struct net_device *conduit, + bool operational) { - return 0; + struct dsa_port *cpu_dp = conduit->dsa_ptr; + struct mt7530_priv *priv = ds->priv; + int val = 0; + u8 mask; + + /* Set the CPU port to trap frames to for MT7530. Trapped frames will be + * forwarded to the numerically smallest CPU port whose conduit + * interface is up. + */ + if (priv->id != ID_MT7530 && priv->id != ID_MT7621) + return; + + mask = BIT(cpu_dp->index); + + if (operational) + priv->active_cpu_ports |= mask; + else + priv->active_cpu_ports &= ~mask; + + if (priv->active_cpu_ports) + val = CPU_EN | CPU_PORT(__ffs(priv->active_cpu_ports)); + + mt7530_rmw(priv, MT7530_MFC, CPU_EN | CPU_PORT_MASK, val); } static int mt7988_setup(struct dsa_switch *ds) @@ -3342,6 +3166,7 @@ const struct dsa_switch_ops mt7530_switch_ops = { .phylink_mac_link_up = mt753x_phylink_mac_link_up, .get_mac_eee = mt753x_get_mac_eee, .set_mac_eee = mt753x_set_mac_eee, + .conduit_state_change = mt753x_conduit_state_change, }; EXPORT_SYMBOL_GPL(mt7530_switch_ops); @@ -3354,7 +3179,6 @@ const struct mt753x_info mt753x_table[] = { .phy_write_c22 = mt7530_phy_write_c22, .phy_read_c45 = mt7530_phy_read_c45, .phy_write_c45 = mt7530_phy_write_c45, - .pad_setup = mt7530_pad_clk_setup, .mac_port_get_caps = mt7530_mac_port_get_caps, .mac_port_config = mt7530_mac_config, }, @@ -3366,7 +3190,6 @@ const struct mt753x_info mt753x_table[] = { .phy_write_c22 = mt7530_phy_write_c22, .phy_read_c45 = mt7530_phy_read_c45, .phy_write_c45 = mt7530_phy_write_c45, - .pad_setup = mt7530_pad_clk_setup, .mac_port_get_caps = mt7530_mac_port_get_caps, .mac_port_config = mt7530_mac_config, }, @@ -3378,8 +3201,6 @@ const struct mt753x_info mt753x_table[] = { .phy_write_c22 = mt7531_ind_c22_phy_write, .phy_read_c45 = mt7531_ind_c45_phy_read, .phy_write_c45 = mt7531_ind_c45_phy_write, - .pad_setup = mt7531_pad_setup, - .cpu_port_config = mt7531_cpu_port_config, .mac_port_get_caps = mt7531_mac_port_get_caps, .mac_port_config = mt7531_mac_config, }, @@ -3391,10 +3212,7 @@ const struct mt753x_info mt753x_table[] = { .phy_write_c22 = mt7531_ind_c22_phy_write, .phy_read_c45 = mt7531_ind_c45_phy_read, .phy_write_c45 = mt7531_ind_c45_phy_write, - .pad_setup = mt7988_pad_setup, - .cpu_port_config = mt7988_cpu_port_config, .mac_port_get_caps = mt7988_mac_port_get_caps, - .mac_port_config = mt7988_mac_config, }, }; EXPORT_SYMBOL_GPL(mt753x_table); @@ -3421,10 +3239,8 @@ mt7530_probe_common(struct mt7530_priv *priv) /* Sanity check if these required device operations are filled * properly. */ - if (!priv->info->sw_setup || !priv->info->pad_setup || - !priv->info->phy_read_c22 || !priv->info->phy_write_c22 || - !priv->info->mac_port_get_caps || - !priv->info->mac_port_config) + if (!priv->info->sw_setup || !priv->info->phy_read_c22 || + !priv->info->phy_write_c22 || !priv->info->mac_port_get_caps) return -EINVAL; priv->id = priv->info->id; -- cgit v1.2.3