From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- drivers/net/ethernet/amd/xgbe/xgbe-phy-v1.c | 853 ++++++++++++++++++++++++++++ 1 file changed, 853 insertions(+) create mode 100644 drivers/net/ethernet/amd/xgbe/xgbe-phy-v1.c (limited to 'drivers/net/ethernet/amd/xgbe/xgbe-phy-v1.c') diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v1.c b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v1.c new file mode 100644 index 0000000000..d16eae415f --- /dev/null +++ b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v1.c @@ -0,0 +1,853 @@ +/* + * AMD 10Gb Ethernet driver + * + * This file is available to you under your choice of the following two + * licenses: + * + * License 1: GPLv2 + * + * Copyright (c) 2016 Advanced Micro Devices, Inc. + * + * This file is free software; you may copy, redistribute and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or (at + * your option) any later version. + * + * This file is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + * This file incorporates work covered by the following copyright and + * permission notice: + * The Synopsys DWC ETHER XGMAC Software Driver and documentation + * (hereinafter "Software") is an unsupported proprietary work of Synopsys, + * Inc. unless otherwise expressly agreed to in writing between Synopsys + * and you. + * + * The Software IS NOT an item of Licensed Software or Licensed Product + * under any End User Software License Agreement or Agreement for Licensed + * Product with Synopsys or any supplement thereto. Permission is hereby + * granted, free of charge, to any person obtaining a copy of this software + * annotated with this license and the Software, to deal in the Software + * without restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is furnished + * to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included + * in all copies or substantial portions of the Software. + * + * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" + * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED + * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A + * PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS + * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + * THE POSSIBILITY OF SUCH DAMAGE. + * + * + * License 2: Modified BSD + * + * Copyright (c) 2016 Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * This file incorporates work covered by the following copyright and + * permission notice: + * The Synopsys DWC ETHER XGMAC Software Driver and documentation + * (hereinafter "Software") is an unsupported proprietary work of Synopsys, + * Inc. unless otherwise expressly agreed to in writing between Synopsys + * and you. + * + * The Software IS NOT an item of Licensed Software or Licensed Product + * under any End User Software License Agreement or Agreement for Licensed + * Product with Synopsys or any supplement thereto. Permission is hereby + * granted, free of charge, to any person obtaining a copy of this software + * annotated with this license and the Software, to deal in the Software + * without restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is furnished + * to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included + * in all copies or substantial portions of the Software. + * + * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" + * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED + * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A + * PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS + * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + * THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include +#include +#include +#include +#include +#include + +#include "xgbe.h" +#include "xgbe-common.h" + +#define XGBE_BLWC_PROPERTY "amd,serdes-blwc" +#define XGBE_CDR_RATE_PROPERTY "amd,serdes-cdr-rate" +#define XGBE_PQ_SKEW_PROPERTY "amd,serdes-pq-skew" +#define XGBE_TX_AMP_PROPERTY "amd,serdes-tx-amp" +#define XGBE_DFE_CFG_PROPERTY "amd,serdes-dfe-tap-config" +#define XGBE_DFE_ENA_PROPERTY "amd,serdes-dfe-tap-enable" + +/* Default SerDes settings */ +#define XGBE_SPEED_1000_BLWC 1 +#define XGBE_SPEED_1000_CDR 0x2 +#define XGBE_SPEED_1000_PLL 0x0 +#define XGBE_SPEED_1000_PQ 0xa +#define XGBE_SPEED_1000_RATE 0x3 +#define XGBE_SPEED_1000_TXAMP 0xf +#define XGBE_SPEED_1000_WORD 0x1 +#define XGBE_SPEED_1000_DFE_TAP_CONFIG 0x3 +#define XGBE_SPEED_1000_DFE_TAP_ENABLE 0x0 + +#define XGBE_SPEED_2500_BLWC 1 +#define XGBE_SPEED_2500_CDR 0x2 +#define XGBE_SPEED_2500_PLL 0x0 +#define XGBE_SPEED_2500_PQ 0xa +#define XGBE_SPEED_2500_RATE 0x1 +#define XGBE_SPEED_2500_TXAMP 0xf +#define XGBE_SPEED_2500_WORD 0x1 +#define XGBE_SPEED_2500_DFE_TAP_CONFIG 0x3 +#define XGBE_SPEED_2500_DFE_TAP_ENABLE 0x0 + +#define XGBE_SPEED_10000_BLWC 0 +#define XGBE_SPEED_10000_CDR 0x7 +#define XGBE_SPEED_10000_PLL 0x1 +#define XGBE_SPEED_10000_PQ 0x12 +#define XGBE_SPEED_10000_RATE 0x0 +#define XGBE_SPEED_10000_TXAMP 0xa +#define XGBE_SPEED_10000_WORD 0x7 +#define XGBE_SPEED_10000_DFE_TAP_CONFIG 0x1 +#define XGBE_SPEED_10000_DFE_TAP_ENABLE 0x7f + +/* Rate-change complete wait/retry count */ +#define XGBE_RATECHANGE_COUNT 500 + +static const u32 xgbe_phy_blwc[] = { + XGBE_SPEED_1000_BLWC, + XGBE_SPEED_2500_BLWC, + XGBE_SPEED_10000_BLWC, +}; + +static const u32 xgbe_phy_cdr_rate[] = { + XGBE_SPEED_1000_CDR, + XGBE_SPEED_2500_CDR, + XGBE_SPEED_10000_CDR, +}; + +static const u32 xgbe_phy_pq_skew[] = { + XGBE_SPEED_1000_PQ, + XGBE_SPEED_2500_PQ, + XGBE_SPEED_10000_PQ, +}; + +static const u32 xgbe_phy_tx_amp[] = { + XGBE_SPEED_1000_TXAMP, + XGBE_SPEED_2500_TXAMP, + XGBE_SPEED_10000_TXAMP, +}; + +static const u32 xgbe_phy_dfe_tap_cfg[] = { + XGBE_SPEED_1000_DFE_TAP_CONFIG, + XGBE_SPEED_2500_DFE_TAP_CONFIG, + XGBE_SPEED_10000_DFE_TAP_CONFIG, +}; + +static const u32 xgbe_phy_dfe_tap_ena[] = { + XGBE_SPEED_1000_DFE_TAP_ENABLE, + XGBE_SPEED_2500_DFE_TAP_ENABLE, + XGBE_SPEED_10000_DFE_TAP_ENABLE, +}; + +struct xgbe_phy_data { + /* 1000/10000 vs 2500/10000 indicator */ + unsigned int speed_set; + + /* SerDes UEFI configurable settings. + * Switching between modes/speeds requires new values for some + * SerDes settings. The values can be supplied as device + * properties in array format. The first array entry is for + * 1GbE, second for 2.5GbE and third for 10GbE + */ + u32 blwc[XGBE_SPEEDS]; + u32 cdr_rate[XGBE_SPEEDS]; + u32 pq_skew[XGBE_SPEEDS]; + u32 tx_amp[XGBE_SPEEDS]; + u32 dfe_tap_cfg[XGBE_SPEEDS]; + u32 dfe_tap_ena[XGBE_SPEEDS]; +}; + +static void xgbe_phy_kr_training_pre(struct xgbe_prv_data *pdata) +{ + XSIR0_IOWRITE_BITS(pdata, SIR0_KR_RT_1, RESET, 1); +} + +static void xgbe_phy_kr_training_post(struct xgbe_prv_data *pdata) +{ + XSIR0_IOWRITE_BITS(pdata, SIR0_KR_RT_1, RESET, 0); +} + +static enum xgbe_mode xgbe_phy_an_outcome(struct xgbe_prv_data *pdata) +{ + struct ethtool_link_ksettings *lks = &pdata->phy.lks; + struct xgbe_phy_data *phy_data = pdata->phy_data; + enum xgbe_mode mode; + unsigned int ad_reg, lp_reg; + + XGBE_SET_LP_ADV(lks, Autoneg); + XGBE_SET_LP_ADV(lks, Backplane); + + /* Compare Advertisement and Link Partner register 1 */ + ad_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_ADVERTISE); + lp_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_LPA); + if (lp_reg & 0x400) + XGBE_SET_LP_ADV(lks, Pause); + if (lp_reg & 0x800) + XGBE_SET_LP_ADV(lks, Asym_Pause); + + if (pdata->phy.pause_autoneg) { + /* Set flow control based on auto-negotiation result */ + pdata->phy.tx_pause = 0; + pdata->phy.rx_pause = 0; + + if (ad_reg & lp_reg & 0x400) { + pdata->phy.tx_pause = 1; + pdata->phy.rx_pause = 1; + } else if (ad_reg & lp_reg & 0x800) { + if (ad_reg & 0x400) + pdata->phy.rx_pause = 1; + else if (lp_reg & 0x400) + pdata->phy.tx_pause = 1; + } + } + + /* Compare Advertisement and Link Partner register 2 */ + ad_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_ADVERTISE + 1); + lp_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_LPA + 1); + if (lp_reg & 0x80) + XGBE_SET_LP_ADV(lks, 10000baseKR_Full); + if (lp_reg & 0x20) { + if (phy_data->speed_set == XGBE_SPEEDSET_2500_10000) + XGBE_SET_LP_ADV(lks, 2500baseX_Full); + else + XGBE_SET_LP_ADV(lks, 1000baseKX_Full); + } + + ad_reg &= lp_reg; + if (ad_reg & 0x80) { + mode = XGBE_MODE_KR; + } else if (ad_reg & 0x20) { + if (phy_data->speed_set == XGBE_SPEEDSET_2500_10000) + mode = XGBE_MODE_KX_2500; + else + mode = XGBE_MODE_KX_1000; + } else { + mode = XGBE_MODE_UNKNOWN; + } + + /* Compare Advertisement and Link Partner register 3 */ + ad_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_ADVERTISE + 2); + lp_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_LPA + 2); + if (lp_reg & 0xc000) + XGBE_SET_LP_ADV(lks, 10000baseR_FEC); + + return mode; +} + +static void xgbe_phy_an_advertising(struct xgbe_prv_data *pdata, + struct ethtool_link_ksettings *dlks) +{ + struct ethtool_link_ksettings *slks = &pdata->phy.lks; + + XGBE_LM_COPY(dlks, advertising, slks, advertising); +} + +static int xgbe_phy_an_config(struct xgbe_prv_data *pdata) +{ + /* Nothing uniquely required for an configuration */ + return 0; +} + +static enum xgbe_an_mode xgbe_phy_an_mode(struct xgbe_prv_data *pdata) +{ + return XGBE_AN_MODE_CL73; +} + +static void xgbe_phy_pcs_power_cycle(struct xgbe_prv_data *pdata) +{ + unsigned int reg; + + reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1); + + reg |= MDIO_CTRL1_LPOWER; + XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, reg); + + usleep_range(75, 100); + + reg &= ~MDIO_CTRL1_LPOWER; + XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, reg); +} + +static void xgbe_phy_start_ratechange(struct xgbe_prv_data *pdata) +{ + /* Assert Rx and Tx ratechange */ + XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, RATECHANGE, 1); +} + +static void xgbe_phy_complete_ratechange(struct xgbe_prv_data *pdata) +{ + unsigned int wait; + u16 status; + + /* Release Rx and Tx ratechange */ + XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, RATECHANGE, 0); + + /* Wait for Rx and Tx ready */ + wait = XGBE_RATECHANGE_COUNT; + while (wait--) { + usleep_range(50, 75); + + status = XSIR0_IOREAD(pdata, SIR0_STATUS); + if (XSIR_GET_BITS(status, SIR0_STATUS, RX_READY) && + XSIR_GET_BITS(status, SIR0_STATUS, TX_READY)) + goto rx_reset; + } + + netif_dbg(pdata, link, pdata->netdev, "SerDes rx/tx not ready (%#hx)\n", + status); + +rx_reset: + /* Perform Rx reset for the DFE changes */ + XRXTX_IOWRITE_BITS(pdata, RXTX_REG6, RESETB_RXD, 0); + XRXTX_IOWRITE_BITS(pdata, RXTX_REG6, RESETB_RXD, 1); +} + +static void xgbe_phy_kr_mode(struct xgbe_prv_data *pdata) +{ + struct xgbe_phy_data *phy_data = pdata->phy_data; + unsigned int reg; + + /* Set PCS to KR/10G speed */ + reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL2); + reg &= ~MDIO_PCS_CTRL2_TYPE; + reg |= MDIO_PCS_CTRL2_10GBR; + XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL2, reg); + + reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1); + reg &= ~MDIO_CTRL1_SPEEDSEL; + reg |= MDIO_CTRL1_SPEED10G; + XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, reg); + + xgbe_phy_pcs_power_cycle(pdata); + + /* Set SerDes to 10G speed */ + xgbe_phy_start_ratechange(pdata); + + XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, DATARATE, XGBE_SPEED_10000_RATE); + XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, WORDMODE, XGBE_SPEED_10000_WORD); + XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, PLLSEL, XGBE_SPEED_10000_PLL); + + XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, CDR_RATE, + phy_data->cdr_rate[XGBE_SPEED_10000]); + XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, TXAMP, + phy_data->tx_amp[XGBE_SPEED_10000]); + XRXTX_IOWRITE_BITS(pdata, RXTX_REG20, BLWC_ENA, + phy_data->blwc[XGBE_SPEED_10000]); + XRXTX_IOWRITE_BITS(pdata, RXTX_REG114, PQ_REG, + phy_data->pq_skew[XGBE_SPEED_10000]); + XRXTX_IOWRITE_BITS(pdata, RXTX_REG129, RXDFE_CONFIG, + phy_data->dfe_tap_cfg[XGBE_SPEED_10000]); + XRXTX_IOWRITE(pdata, RXTX_REG22, + phy_data->dfe_tap_ena[XGBE_SPEED_10000]); + + xgbe_phy_complete_ratechange(pdata); + + netif_dbg(pdata, link, pdata->netdev, "10GbE KR mode set\n"); +} + +static void xgbe_phy_kx_2500_mode(struct xgbe_prv_data *pdata) +{ + struct xgbe_phy_data *phy_data = pdata->phy_data; + unsigned int reg; + + /* Set PCS to KX/1G speed */ + reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL2); + reg &= ~MDIO_PCS_CTRL2_TYPE; + reg |= MDIO_PCS_CTRL2_10GBX; + XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL2, reg); + + reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1); + reg &= ~MDIO_CTRL1_SPEEDSEL; + reg |= MDIO_CTRL1_SPEED1G; + XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, reg); + + xgbe_phy_pcs_power_cycle(pdata); + + /* Set SerDes to 2.5G speed */ + xgbe_phy_start_ratechange(pdata); + + XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, DATARATE, XGBE_SPEED_2500_RATE); + XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, WORDMODE, XGBE_SPEED_2500_WORD); + XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, PLLSEL, XGBE_SPEED_2500_PLL); + + XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, CDR_RATE, + phy_data->cdr_rate[XGBE_SPEED_2500]); + XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, TXAMP, + phy_data->tx_amp[XGBE_SPEED_2500]); + XRXTX_IOWRITE_BITS(pdata, RXTX_REG20, BLWC_ENA, + phy_data->blwc[XGBE_SPEED_2500]); + XRXTX_IOWRITE_BITS(pdata, RXTX_REG114, PQ_REG, + phy_data->pq_skew[XGBE_SPEED_2500]); + XRXTX_IOWRITE_BITS(pdata, RXTX_REG129, RXDFE_CONFIG, + phy_data->dfe_tap_cfg[XGBE_SPEED_2500]); + XRXTX_IOWRITE(pdata, RXTX_REG22, + phy_data->dfe_tap_ena[XGBE_SPEED_2500]); + + xgbe_phy_complete_ratechange(pdata); + + netif_dbg(pdata, link, pdata->netdev, "2.5GbE KX mode set\n"); +} + +static void xgbe_phy_kx_1000_mode(struct xgbe_prv_data *pdata) +{ + struct xgbe_phy_data *phy_data = pdata->phy_data; + unsigned int reg; + + /* Set PCS to KX/1G speed */ + reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL2); + reg &= ~MDIO_PCS_CTRL2_TYPE; + reg |= MDIO_PCS_CTRL2_10GBX; + XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL2, reg); + + reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1); + reg &= ~MDIO_CTRL1_SPEEDSEL; + reg |= MDIO_CTRL1_SPEED1G; + XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, reg); + + xgbe_phy_pcs_power_cycle(pdata); + + /* Set SerDes to 1G speed */ + xgbe_phy_start_ratechange(pdata); + + XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, DATARATE, XGBE_SPEED_1000_RATE); + XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, WORDMODE, XGBE_SPEED_1000_WORD); + XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, PLLSEL, XGBE_SPEED_1000_PLL); + + XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, CDR_RATE, + phy_data->cdr_rate[XGBE_SPEED_1000]); + XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, TXAMP, + phy_data->tx_amp[XGBE_SPEED_1000]); + XRXTX_IOWRITE_BITS(pdata, RXTX_REG20, BLWC_ENA, + phy_data->blwc[XGBE_SPEED_1000]); + XRXTX_IOWRITE_BITS(pdata, RXTX_REG114, PQ_REG, + phy_data->pq_skew[XGBE_SPEED_1000]); + XRXTX_IOWRITE_BITS(pdata, RXTX_REG129, RXDFE_CONFIG, + phy_data->dfe_tap_cfg[XGBE_SPEED_1000]); + XRXTX_IOWRITE(pdata, RXTX_REG22, + phy_data->dfe_tap_ena[XGBE_SPEED_1000]); + + xgbe_phy_complete_ratechange(pdata); + + netif_dbg(pdata, link, pdata->netdev, "1GbE KX mode set\n"); +} + +static enum xgbe_mode xgbe_phy_cur_mode(struct xgbe_prv_data *pdata) +{ + struct xgbe_phy_data *phy_data = pdata->phy_data; + enum xgbe_mode mode; + unsigned int reg; + + reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL2); + reg &= MDIO_PCS_CTRL2_TYPE; + + if (reg == MDIO_PCS_CTRL2_10GBR) { + mode = XGBE_MODE_KR; + } else { + if (phy_data->speed_set == XGBE_SPEEDSET_2500_10000) + mode = XGBE_MODE_KX_2500; + else + mode = XGBE_MODE_KX_1000; + } + + return mode; +} + +static enum xgbe_mode xgbe_phy_switch_mode(struct xgbe_prv_data *pdata) +{ + struct xgbe_phy_data *phy_data = pdata->phy_data; + enum xgbe_mode mode; + + /* If we are in KR switch to KX, and vice-versa */ + if (xgbe_phy_cur_mode(pdata) == XGBE_MODE_KR) { + if (phy_data->speed_set == XGBE_SPEEDSET_2500_10000) + mode = XGBE_MODE_KX_2500; + else + mode = XGBE_MODE_KX_1000; + } else { + mode = XGBE_MODE_KR; + } + + return mode; +} + +static enum xgbe_mode xgbe_phy_get_mode(struct xgbe_prv_data *pdata, + int speed) +{ + struct xgbe_phy_data *phy_data = pdata->phy_data; + + switch (speed) { + case SPEED_1000: + return (phy_data->speed_set == XGBE_SPEEDSET_1000_10000) + ? XGBE_MODE_KX_1000 : XGBE_MODE_UNKNOWN; + case SPEED_2500: + return (phy_data->speed_set == XGBE_SPEEDSET_2500_10000) + ? XGBE_MODE_KX_2500 : XGBE_MODE_UNKNOWN; + case SPEED_10000: + return XGBE_MODE_KR; + default: + return XGBE_MODE_UNKNOWN; + } +} + +static void xgbe_phy_set_mode(struct xgbe_prv_data *pdata, enum xgbe_mode mode) +{ + switch (mode) { + case XGBE_MODE_KX_1000: + xgbe_phy_kx_1000_mode(pdata); + break; + case XGBE_MODE_KX_2500: + xgbe_phy_kx_2500_mode(pdata); + break; + case XGBE_MODE_KR: + xgbe_phy_kr_mode(pdata); + break; + default: + break; + } +} + +static bool xgbe_phy_check_mode(struct xgbe_prv_data *pdata, + enum xgbe_mode mode, bool advert) +{ + if (pdata->phy.autoneg == AUTONEG_ENABLE) { + return advert; + } else { + enum xgbe_mode cur_mode; + + cur_mode = xgbe_phy_get_mode(pdata, pdata->phy.speed); + if (cur_mode == mode) + return true; + } + + return false; +} + +static bool xgbe_phy_use_mode(struct xgbe_prv_data *pdata, enum xgbe_mode mode) +{ + struct ethtool_link_ksettings *lks = &pdata->phy.lks; + + switch (mode) { + case XGBE_MODE_KX_1000: + return xgbe_phy_check_mode(pdata, mode, + XGBE_ADV(lks, 1000baseKX_Full)); + case XGBE_MODE_KX_2500: + return xgbe_phy_check_mode(pdata, mode, + XGBE_ADV(lks, 2500baseX_Full)); + case XGBE_MODE_KR: + return xgbe_phy_check_mode(pdata, mode, + XGBE_ADV(lks, 10000baseKR_Full)); + default: + return false; + } +} + +static bool xgbe_phy_valid_speed(struct xgbe_prv_data *pdata, int speed) +{ + struct xgbe_phy_data *phy_data = pdata->phy_data; + + switch (speed) { + case SPEED_1000: + if (phy_data->speed_set != XGBE_SPEEDSET_1000_10000) + return false; + return true; + case SPEED_2500: + if (phy_data->speed_set != XGBE_SPEEDSET_2500_10000) + return false; + return true; + case SPEED_10000: + return true; + default: + return false; + } +} + +static int xgbe_phy_link_status(struct xgbe_prv_data *pdata, int *an_restart) +{ + unsigned int reg; + + *an_restart = 0; + + /* Link status is latched low, so read once to clear + * and then read again to get current state + */ + reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_STAT1); + reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_STAT1); + + return (reg & MDIO_STAT1_LSTATUS) ? 1 : 0; +} + +static void xgbe_phy_stop(struct xgbe_prv_data *pdata) +{ + /* Nothing uniquely required for stop */ +} + +static int xgbe_phy_start(struct xgbe_prv_data *pdata) +{ + /* Nothing uniquely required for start */ + return 0; +} + +static int xgbe_phy_reset(struct xgbe_prv_data *pdata) +{ + unsigned int reg, count; + + /* Perform a software reset of the PCS */ + reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1); + reg |= MDIO_CTRL1_RESET; + XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, reg); + + count = 50; + do { + msleep(20); + reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1); + } while ((reg & MDIO_CTRL1_RESET) && --count); + + if (reg & MDIO_CTRL1_RESET) + return -ETIMEDOUT; + + return 0; +} + +static void xgbe_phy_exit(struct xgbe_prv_data *pdata) +{ + /* Nothing uniquely required for exit */ +} + +static int xgbe_phy_init(struct xgbe_prv_data *pdata) +{ + struct ethtool_link_ksettings *lks = &pdata->phy.lks; + struct xgbe_phy_data *phy_data; + int ret; + + phy_data = devm_kzalloc(pdata->dev, sizeof(*phy_data), GFP_KERNEL); + if (!phy_data) + return -ENOMEM; + + /* Retrieve the PHY speedset */ + ret = device_property_read_u32(pdata->phy_dev, XGBE_SPEEDSET_PROPERTY, + &phy_data->speed_set); + if (ret) { + dev_err(pdata->dev, "invalid %s property\n", + XGBE_SPEEDSET_PROPERTY); + return ret; + } + + switch (phy_data->speed_set) { + case XGBE_SPEEDSET_1000_10000: + case XGBE_SPEEDSET_2500_10000: + break; + default: + dev_err(pdata->dev, "invalid %s property\n", + XGBE_SPEEDSET_PROPERTY); + return -EINVAL; + } + + /* Retrieve the PHY configuration properties */ + if (device_property_present(pdata->phy_dev, XGBE_BLWC_PROPERTY)) { + ret = device_property_read_u32_array(pdata->phy_dev, + XGBE_BLWC_PROPERTY, + phy_data->blwc, + XGBE_SPEEDS); + if (ret) { + dev_err(pdata->dev, "invalid %s property\n", + XGBE_BLWC_PROPERTY); + return ret; + } + } else { + memcpy(phy_data->blwc, xgbe_phy_blwc, + sizeof(phy_data->blwc)); + } + + if (device_property_present(pdata->phy_dev, XGBE_CDR_RATE_PROPERTY)) { + ret = device_property_read_u32_array(pdata->phy_dev, + XGBE_CDR_RATE_PROPERTY, + phy_data->cdr_rate, + XGBE_SPEEDS); + if (ret) { + dev_err(pdata->dev, "invalid %s property\n", + XGBE_CDR_RATE_PROPERTY); + return ret; + } + } else { + memcpy(phy_data->cdr_rate, xgbe_phy_cdr_rate, + sizeof(phy_data->cdr_rate)); + } + + if (device_property_present(pdata->phy_dev, XGBE_PQ_SKEW_PROPERTY)) { + ret = device_property_read_u32_array(pdata->phy_dev, + XGBE_PQ_SKEW_PROPERTY, + phy_data->pq_skew, + XGBE_SPEEDS); + if (ret) { + dev_err(pdata->dev, "invalid %s property\n", + XGBE_PQ_SKEW_PROPERTY); + return ret; + } + } else { + memcpy(phy_data->pq_skew, xgbe_phy_pq_skew, + sizeof(phy_data->pq_skew)); + } + + if (device_property_present(pdata->phy_dev, XGBE_TX_AMP_PROPERTY)) { + ret = device_property_read_u32_array(pdata->phy_dev, + XGBE_TX_AMP_PROPERTY, + phy_data->tx_amp, + XGBE_SPEEDS); + if (ret) { + dev_err(pdata->dev, "invalid %s property\n", + XGBE_TX_AMP_PROPERTY); + return ret; + } + } else { + memcpy(phy_data->tx_amp, xgbe_phy_tx_amp, + sizeof(phy_data->tx_amp)); + } + + if (device_property_present(pdata->phy_dev, XGBE_DFE_CFG_PROPERTY)) { + ret = device_property_read_u32_array(pdata->phy_dev, + XGBE_DFE_CFG_PROPERTY, + phy_data->dfe_tap_cfg, + XGBE_SPEEDS); + if (ret) { + dev_err(pdata->dev, "invalid %s property\n", + XGBE_DFE_CFG_PROPERTY); + return ret; + } + } else { + memcpy(phy_data->dfe_tap_cfg, xgbe_phy_dfe_tap_cfg, + sizeof(phy_data->dfe_tap_cfg)); + } + + if (device_property_present(pdata->phy_dev, XGBE_DFE_ENA_PROPERTY)) { + ret = device_property_read_u32_array(pdata->phy_dev, + XGBE_DFE_ENA_PROPERTY, + phy_data->dfe_tap_ena, + XGBE_SPEEDS); + if (ret) { + dev_err(pdata->dev, "invalid %s property\n", + XGBE_DFE_ENA_PROPERTY); + return ret; + } + } else { + memcpy(phy_data->dfe_tap_ena, xgbe_phy_dfe_tap_ena, + sizeof(phy_data->dfe_tap_ena)); + } + + /* Initialize supported features */ + XGBE_ZERO_SUP(lks); + XGBE_SET_SUP(lks, Autoneg); + XGBE_SET_SUP(lks, Pause); + XGBE_SET_SUP(lks, Asym_Pause); + XGBE_SET_SUP(lks, Backplane); + XGBE_SET_SUP(lks, 10000baseKR_Full); + switch (phy_data->speed_set) { + case XGBE_SPEEDSET_1000_10000: + XGBE_SET_SUP(lks, 1000baseKX_Full); + break; + case XGBE_SPEEDSET_2500_10000: + XGBE_SET_SUP(lks, 2500baseX_Full); + break; + } + + if (pdata->fec_ability & MDIO_PMA_10GBR_FECABLE_ABLE) + XGBE_SET_SUP(lks, 10000baseR_FEC); + + pdata->phy_data = phy_data; + + return 0; +} + +void xgbe_init_function_ptrs_phy_v1(struct xgbe_phy_if *phy_if) +{ + struct xgbe_phy_impl_if *phy_impl = &phy_if->phy_impl; + + phy_impl->init = xgbe_phy_init; + phy_impl->exit = xgbe_phy_exit; + + phy_impl->reset = xgbe_phy_reset; + phy_impl->start = xgbe_phy_start; + phy_impl->stop = xgbe_phy_stop; + + phy_impl->link_status = xgbe_phy_link_status; + + phy_impl->valid_speed = xgbe_phy_valid_speed; + + phy_impl->use_mode = xgbe_phy_use_mode; + phy_impl->set_mode = xgbe_phy_set_mode; + phy_impl->get_mode = xgbe_phy_get_mode; + phy_impl->switch_mode = xgbe_phy_switch_mode; + phy_impl->cur_mode = xgbe_phy_cur_mode; + + phy_impl->an_mode = xgbe_phy_an_mode; + + phy_impl->an_config = xgbe_phy_an_config; + + phy_impl->an_advertising = xgbe_phy_an_advertising; + + phy_impl->an_outcome = xgbe_phy_an_outcome; + + phy_impl->kr_training_pre = xgbe_phy_kr_training_pre; + phy_impl->kr_training_post = xgbe_phy_kr_training_post; +} -- cgit v1.2.3