From 9f0fc191371843c4fc000a226b0a26b6c059aacd Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 18 May 2024 19:40:19 +0200 Subject: Merging upstream version 6.7.7. Signed-off-by: Daniel Baumann --- drivers/net/ethernet/intel/e1000e/e1000.h | 20 ++++++++++++++++++++ drivers/net/ethernet/intel/e1000e/ptp.c | 22 +++++++++++++++------- 2 files changed, 35 insertions(+), 7 deletions(-) (limited to 'drivers/net/ethernet/intel/e1000e') diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h index a187582d22..ba9c19e699 100644 --- a/drivers/net/ethernet/intel/e1000e/e1000.h +++ b/drivers/net/ethernet/intel/e1000e/e1000.h @@ -360,23 +360,43 @@ s32 e1000e_get_base_timinca(struct e1000_adapter *adapter, u32 *timinca); * As a result, a shift of INCVALUE_SHIFT_n is used to fit a value of * INCVALUE_n into the TIMINCA register allowing 32+8+(24-INCVALUE_SHIFT_n) * bits to count nanoseconds leaving the rest for fractional nonseconds. + * + * Any given INCVALUE also has an associated maximum adjustment value. This + * maximum adjustment value is the largest increase (or decrease) which can be + * safely applied without overflowing the INCVALUE. Since INCVALUE has + * a maximum range of 24 bits, its largest value is 0xFFFFFF. + * + * To understand where the maximum value comes from, consider the following + * equation: + * + * new_incval = base_incval + (base_incval * adjustment) / 1billion + * + * To avoid overflow that means: + * max_incval = base_incval + (base_incval * max_adj) / billion + * + * Re-arranging: + * max_adj = floor(((max_incval - base_incval) * 1billion) / 1billion) */ #define INCVALUE_96MHZ 125 #define INCVALUE_SHIFT_96MHZ 17 #define INCPERIOD_SHIFT_96MHZ 2 #define INCPERIOD_96MHZ (12 >> INCPERIOD_SHIFT_96MHZ) +#define MAX_PPB_96MHZ 23999900 /* 23,999,900 ppb */ #define INCVALUE_25MHZ 40 #define INCVALUE_SHIFT_25MHZ 18 #define INCPERIOD_25MHZ 1 +#define MAX_PPB_25MHZ 599999900 /* 599,999,900 ppb */ #define INCVALUE_24MHZ 125 #define INCVALUE_SHIFT_24MHZ 14 #define INCPERIOD_24MHZ 3 +#define MAX_PPB_24MHZ 999999999 /* 999,999,999 ppb */ #define INCVALUE_38400KHZ 26 #define INCVALUE_SHIFT_38400KHZ 19 #define INCPERIOD_38400KHZ 1 +#define MAX_PPB_38400KHZ 230769100 /* 230,769,100 ppb */ /* Another drawback of scaling the incvalue by a large factor is the * 64-bit SYSTIM register overflows more quickly. This is dealt with diff --git a/drivers/net/ethernet/intel/e1000e/ptp.c b/drivers/net/ethernet/intel/e1000e/ptp.c index 02d871bc11..bbcfd52939 100644 --- a/drivers/net/ethernet/intel/e1000e/ptp.c +++ b/drivers/net/ethernet/intel/e1000e/ptp.c @@ -280,8 +280,17 @@ void e1000e_ptp_init(struct e1000_adapter *adapter) switch (hw->mac.type) { case e1000_pch2lan: + adapter->ptp_clock_info.max_adj = MAX_PPB_96MHZ; + break; case e1000_pch_lpt: + if (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI) + adapter->ptp_clock_info.max_adj = MAX_PPB_96MHZ; + else + adapter->ptp_clock_info.max_adj = MAX_PPB_25MHZ; + break; case e1000_pch_spt: + adapter->ptp_clock_info.max_adj = MAX_PPB_24MHZ; + break; case e1000_pch_cnp: case e1000_pch_tgp: case e1000_pch_adp: @@ -289,15 +298,14 @@ void e1000e_ptp_init(struct e1000_adapter *adapter) case e1000_pch_lnp: case e1000_pch_ptp: case e1000_pch_nvp: - if ((hw->mac.type < e1000_pch_lpt) || - (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI)) { - adapter->ptp_clock_info.max_adj = 24000000 - 1; - break; - } - fallthrough; + if (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI) + adapter->ptp_clock_info.max_adj = MAX_PPB_24MHZ; + else + adapter->ptp_clock_info.max_adj = MAX_PPB_38400KHZ; + break; case e1000_82574: case e1000_82583: - adapter->ptp_clock_info.max_adj = 600000000 - 1; + adapter->ptp_clock_info.max_adj = MAX_PPB_25MHZ; break; default: break; -- cgit v1.2.3