From 9f0fc191371843c4fc000a226b0a26b6c059aacd Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 18 May 2024 19:40:19 +0200 Subject: Merging upstream version 6.7.7. Signed-off-by: Daniel Baumann --- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 44 ++++++++++++--------------- 1 file changed, 20 insertions(+), 24 deletions(-) (limited to 'drivers/net/ethernet/intel/ixgbe/ixgbe_main.c') diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index dd03b017df..6a3f633406 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -2421,7 +2421,7 @@ static int ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector, } if (xdp_xmit & IXGBE_XDP_REDIR) - xdp_do_flush_map(); + xdp_do_flush(); if (xdp_xmit & IXGBE_XDP_TX) { struct ixgbe_ring *ring = ixgbe_determine_xdp_ring(adapter); @@ -2756,7 +2756,6 @@ static void ixgbe_check_overtemp_subtask(struct ixgbe_adapter *adapter) { struct ixgbe_hw *hw = &adapter->hw; u32 eicr = adapter->interrupt_event; - s32 rc; if (test_bit(__IXGBE_DOWN, &adapter->state)) return; @@ -2790,14 +2789,13 @@ static void ixgbe_check_overtemp_subtask(struct ixgbe_adapter *adapter) } /* Check if this is not due to overtemp */ - if (hw->phy.ops.check_overtemp(hw) != IXGBE_ERR_OVERTEMP) + if (!hw->phy.ops.check_overtemp(hw)) return; break; case IXGBE_DEV_ID_X550EM_A_1G_T: case IXGBE_DEV_ID_X550EM_A_1G_T_L: - rc = hw->phy.ops.check_overtemp(hw); - if (rc != IXGBE_ERR_OVERTEMP) + if (!hw->phy.ops.check_overtemp(hw)) return; break; default: @@ -5512,7 +5510,7 @@ static int ixgbe_non_sfp_link_config(struct ixgbe_hw *hw) { u32 speed; bool autoneg, link_up = false; - int ret = IXGBE_ERR_LINK_SETUP; + int ret = -EIO; if (hw->mac.ops.check_link) ret = hw->mac.ops.check_link(hw, &speed, &link_up, false); @@ -5983,13 +5981,13 @@ void ixgbe_reset(struct ixgbe_adapter *adapter) err = hw->mac.ops.init_hw(hw); switch (err) { case 0: - case IXGBE_ERR_SFP_NOT_PRESENT: - case IXGBE_ERR_SFP_NOT_SUPPORTED: + case -ENOENT: + case -EOPNOTSUPP: break; - case IXGBE_ERR_PRIMARY_REQUESTS_PENDING: + case -EALREADY: e_dev_err("primary disable timed out\n"); break; - case IXGBE_ERR_EEPROM_VERSION: + case -EACCES: /* We are running on a pre-production device, log a warning */ e_dev_warn("This device is a pre-production adapter/LOM. " "Please be aware there may be issues associated with " @@ -7829,10 +7827,10 @@ static void ixgbe_sfp_detection_subtask(struct ixgbe_adapter *adapter) adapter->sfp_poll_time = jiffies + IXGBE_SFP_POLL_JIFFIES - 1; err = hw->phy.ops.identify_sfp(hw); - if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) + if (err == -EOPNOTSUPP) goto sfp_out; - if (err == IXGBE_ERR_SFP_NOT_PRESENT) { + if (err == -ENOENT) { /* If no cable is present, then we need to reset * the next time we find a good cable. */ adapter->flags2 |= IXGBE_FLAG2_SFP_NEEDS_RESET; @@ -7858,7 +7856,7 @@ static void ixgbe_sfp_detection_subtask(struct ixgbe_adapter *adapter) else err = hw->mac.ops.setup_sfp(hw); - if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) + if (err == -EOPNOTSUPP) goto sfp_out; adapter->flags |= IXGBE_FLAG_NEED_LINK_CONFIG; @@ -7867,8 +7865,8 @@ static void ixgbe_sfp_detection_subtask(struct ixgbe_adapter *adapter) sfp_out: clear_bit(__IXGBE_IN_SFP_INIT, &adapter->state); - if ((err == IXGBE_ERR_SFP_NOT_SUPPORTED) && - (adapter->netdev->reg_state == NETREG_REGISTERED)) { + if (err == -EOPNOTSUPP && + adapter->netdev->reg_state == NETREG_REGISTERED) { e_dev_err("failed to initialize because an unsupported " "SFP+ module type was detected.\n"); e_dev_err("Reload the driver after installing a " @@ -7938,7 +7936,7 @@ static void ixgbe_service_timer(struct timer_list *t) static void ixgbe_phy_interrupt_subtask(struct ixgbe_adapter *adapter) { struct ixgbe_hw *hw = &adapter->hw; - u32 status; + bool overtemp; if (!(adapter->flags2 & IXGBE_FLAG2_PHY_INTERRUPT)) return; @@ -7948,11 +7946,9 @@ static void ixgbe_phy_interrupt_subtask(struct ixgbe_adapter *adapter) if (!hw->phy.ops.handle_lasi) return; - status = hw->phy.ops.handle_lasi(&adapter->hw); - if (status != IXGBE_ERR_OVERTEMP) - return; - - e_crit(drv, "%s\n", ixgbe_overheat_msg); + hw->phy.ops.handle_lasi(&adapter->hw, &overtemp); + if (overtemp) + e_crit(drv, "%s\n", ixgbe_overheat_msg); } static void ixgbe_reset_subtask(struct ixgbe_adapter *adapter) @@ -10922,9 +10918,9 @@ static int ixgbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent) err = hw->mac.ops.reset_hw(hw); hw->phy.reset_if_overtemp = false; ixgbe_set_eee_capable(adapter); - if (err == IXGBE_ERR_SFP_NOT_PRESENT) { + if (err == -ENOENT) { err = 0; - } else if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) { + } else if (err == -EOPNOTSUPP) { e_dev_err("failed to load because an unsupported SFP+ or QSFP module type was detected.\n"); e_dev_err("Reload the driver after installing a supported module.\n"); goto err_sw_init; @@ -11143,7 +11139,7 @@ skip_sriov: /* reset the hardware with the new settings */ err = hw->mac.ops.start_hw(hw); - if (err == IXGBE_ERR_EEPROM_VERSION) { + if (err == -EACCES) { /* We are running on a pre-production device, log a warning */ e_dev_warn("This device is a pre-production adapter/LOM. " "Please be aware there may be issues associated " -- cgit v1.2.3