From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- drivers/net/ethernet/qualcomm/qca_debug.c | 303 ++++++++++++++++++++++++++++++ 1 file changed, 303 insertions(+) create mode 100644 drivers/net/ethernet/qualcomm/qca_debug.c (limited to 'drivers/net/ethernet/qualcomm/qca_debug.c') diff --git a/drivers/net/ethernet/qualcomm/qca_debug.c b/drivers/net/ethernet/qualcomm/qca_debug.c new file mode 100644 index 0000000000..1822f2ad8f --- /dev/null +++ b/drivers/net/ethernet/qualcomm/qca_debug.c @@ -0,0 +1,303 @@ +/* + * Copyright (c) 2011, 2012, Qualcomm Atheros Communications Inc. + * Copyright (c) 2014, I2SE GmbH + * + * Permission to use, copy, modify, and/or distribute this software + * for any purpose with or without fee is hereby granted, provided + * that the above copyright notice and this permission notice appear + * in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL + * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL + * THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM + * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, + * NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +/* This file contains debugging routines for use in the QCA7K driver. + */ + +#include +#include +#include +#include + +#include "qca_7k.h" +#include "qca_debug.h" + +#define QCASPI_MAX_REGS 0x20 + +#define QCASPI_RX_MAX_FRAMES 4 + +static const u16 qcaspi_spi_regs[] = { + SPI_REG_BFR_SIZE, + SPI_REG_WRBUF_SPC_AVA, + SPI_REG_RDBUF_BYTE_AVA, + SPI_REG_SPI_CONFIG, + SPI_REG_SPI_STATUS, + SPI_REG_INTR_CAUSE, + SPI_REG_INTR_ENABLE, + SPI_REG_RDBUF_WATERMARK, + SPI_REG_WRBUF_WATERMARK, + SPI_REG_SIGNATURE, + SPI_REG_ACTION_CTRL +}; + +/* The order of these strings must match the order of the fields in + * struct qcaspi_stats + * See qca_spi.h + */ +static const char qcaspi_gstrings_stats[][ETH_GSTRING_LEN] = { + "Triggered resets", + "Device resets", + "Reset timeouts", + "Read errors", + "Write errors", + "Read buffer errors", + "Write buffer errors", + "Out of memory", + "Write buffer misses", + "Transmit ring full", + "SPI errors", + "Write verify errors", + "Buffer available errors", + "Bad signature", +}; + +#ifdef CONFIG_DEBUG_FS + +static int +qcaspi_info_show(struct seq_file *s, void *what) +{ + struct qcaspi *qca = s->private; + + seq_printf(s, "RX buffer size : %lu\n", + (unsigned long)qca->buffer_size); + + seq_puts(s, "TX ring state : "); + + if (qca->txr.skb[qca->txr.head] == NULL) + seq_puts(s, "empty"); + else if (qca->txr.skb[qca->txr.tail]) + seq_puts(s, "full"); + else + seq_puts(s, "in use"); + + seq_puts(s, "\n"); + + seq_printf(s, "TX ring size : %u\n", + qca->txr.size); + + seq_printf(s, "Sync state : %u (", + (unsigned int)qca->sync); + switch (qca->sync) { + case QCASPI_SYNC_UNKNOWN: + seq_puts(s, "QCASPI_SYNC_UNKNOWN"); + break; + case QCASPI_SYNC_RESET: + seq_puts(s, "QCASPI_SYNC_RESET"); + break; + case QCASPI_SYNC_READY: + seq_puts(s, "QCASPI_SYNC_READY"); + break; + default: + seq_puts(s, "INVALID"); + break; + } + seq_puts(s, ")\n"); + + seq_printf(s, "IRQ : %d\n", + qca->spi_dev->irq); + seq_printf(s, "INTR REQ : %u\n", + qca->intr_req); + seq_printf(s, "INTR SVC : %u\n", + qca->intr_svc); + + seq_printf(s, "SPI max speed : %lu\n", + (unsigned long)qca->spi_dev->max_speed_hz); + seq_printf(s, "SPI mode : %x\n", + qca->spi_dev->mode); + seq_printf(s, "SPI chip select : %u\n", + (unsigned int)spi_get_chipselect(qca->spi_dev, 0)); + seq_printf(s, "SPI legacy mode : %u\n", + (unsigned int)qca->legacy_mode); + seq_printf(s, "SPI burst length : %u\n", + (unsigned int)qca->burst_len); + + return 0; +} +DEFINE_SHOW_ATTRIBUTE(qcaspi_info); + +void +qcaspi_init_device_debugfs(struct qcaspi *qca) +{ + qca->device_root = debugfs_create_dir(dev_name(&qca->net_dev->dev), + NULL); + + debugfs_create_file("info", S_IFREG | 0444, qca->device_root, qca, + &qcaspi_info_fops); +} + +void +qcaspi_remove_device_debugfs(struct qcaspi *qca) +{ + debugfs_remove_recursive(qca->device_root); +} + +#else /* CONFIG_DEBUG_FS */ + +void +qcaspi_init_device_debugfs(struct qcaspi *qca) +{ +} + +void +qcaspi_remove_device_debugfs(struct qcaspi *qca) +{ +} + +#endif + +static void +qcaspi_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *p) +{ + struct qcaspi *qca = netdev_priv(dev); + + strscpy(p->driver, QCASPI_DRV_NAME, sizeof(p->driver)); + strscpy(p->version, QCASPI_DRV_VERSION, sizeof(p->version)); + strscpy(p->fw_version, "QCA7000", sizeof(p->fw_version)); + strscpy(p->bus_info, dev_name(&qca->spi_dev->dev), + sizeof(p->bus_info)); +} + +static int +qcaspi_get_link_ksettings(struct net_device *dev, + struct ethtool_link_ksettings *cmd) +{ + ethtool_link_ksettings_zero_link_mode(cmd, supported); + ethtool_link_ksettings_add_link_mode(cmd, supported, 10baseT_Half); + + cmd->base.speed = SPEED_10; + cmd->base.duplex = DUPLEX_HALF; + cmd->base.port = PORT_OTHER; + cmd->base.autoneg = AUTONEG_DISABLE; + + return 0; +} + +static void +qcaspi_get_ethtool_stats(struct net_device *dev, struct ethtool_stats *estats, u64 *data) +{ + struct qcaspi *qca = netdev_priv(dev); + struct qcaspi_stats *st = &qca->stats; + + memcpy(data, st, ARRAY_SIZE(qcaspi_gstrings_stats) * sizeof(u64)); +} + +static void +qcaspi_get_strings(struct net_device *dev, u32 stringset, u8 *buf) +{ + switch (stringset) { + case ETH_SS_STATS: + memcpy(buf, &qcaspi_gstrings_stats, + sizeof(qcaspi_gstrings_stats)); + break; + default: + WARN_ON(1); + break; + } +} + +static int +qcaspi_get_sset_count(struct net_device *dev, int sset) +{ + switch (sset) { + case ETH_SS_STATS: + return ARRAY_SIZE(qcaspi_gstrings_stats); + default: + return -EINVAL; + } +} + +static int +qcaspi_get_regs_len(struct net_device *dev) +{ + return sizeof(u32) * QCASPI_MAX_REGS; +} + +static void +qcaspi_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *p) +{ + struct qcaspi *qca = netdev_priv(dev); + u32 *regs_buff = p; + unsigned int i; + + regs->version = 1; + memset(regs_buff, 0, sizeof(u32) * QCASPI_MAX_REGS); + + for (i = 0; i < ARRAY_SIZE(qcaspi_spi_regs); i++) { + u16 offset, value; + + qcaspi_read_register(qca, qcaspi_spi_regs[i], &value); + offset = qcaspi_spi_regs[i] >> 8; + regs_buff[offset] = value; + } +} + +static void +qcaspi_get_ringparam(struct net_device *dev, struct ethtool_ringparam *ring, + struct kernel_ethtool_ringparam *kernel_ring, + struct netlink_ext_ack *extack) +{ + struct qcaspi *qca = netdev_priv(dev); + + ring->rx_max_pending = QCASPI_RX_MAX_FRAMES; + ring->tx_max_pending = TX_RING_MAX_LEN; + ring->rx_pending = QCASPI_RX_MAX_FRAMES; + ring->tx_pending = qca->txr.count; +} + +static int +qcaspi_set_ringparam(struct net_device *dev, struct ethtool_ringparam *ring, + struct kernel_ethtool_ringparam *kernel_ring, + struct netlink_ext_ack *extack) +{ + struct qcaspi *qca = netdev_priv(dev); + + if (ring->rx_pending != QCASPI_RX_MAX_FRAMES || + (ring->rx_mini_pending) || + (ring->rx_jumbo_pending)) + return -EINVAL; + + if (qca->spi_thread) + kthread_park(qca->spi_thread); + + qca->txr.count = max_t(u32, ring->tx_pending, TX_RING_MIN_LEN); + qca->txr.count = min_t(u16, qca->txr.count, TX_RING_MAX_LEN); + + if (qca->spi_thread) + kthread_unpark(qca->spi_thread); + + return 0; +} + +static const struct ethtool_ops qcaspi_ethtool_ops = { + .get_drvinfo = qcaspi_get_drvinfo, + .get_link = ethtool_op_get_link, + .get_ethtool_stats = qcaspi_get_ethtool_stats, + .get_strings = qcaspi_get_strings, + .get_sset_count = qcaspi_get_sset_count, + .get_regs_len = qcaspi_get_regs_len, + .get_regs = qcaspi_get_regs, + .get_ringparam = qcaspi_get_ringparam, + .set_ringparam = qcaspi_set_ringparam, + .get_link_ksettings = qcaspi_get_link_ksettings, +}; + +void qcaspi_set_ethtool_ops(struct net_device *dev) +{ + dev->ethtool_ops = &qcaspi_ethtool_ops; +} -- cgit v1.2.3