From 94ac2ab3fff96814d7460a27a0e9d004abbd4128 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Wed, 19 Jun 2024 23:00:37 +0200 Subject: Merging upstream version 6.9.2. Signed-off-by: Daniel Baumann --- drivers/net/mdio/mdio-ipq4019.c | 109 +++++++++++++++++++++++++++++++++++++--- 1 file changed, 103 insertions(+), 6 deletions(-) (limited to 'drivers/net/mdio/mdio-ipq4019.c') diff --git a/drivers/net/mdio/mdio-ipq4019.c b/drivers/net/mdio/mdio-ipq4019.c index abd8b508ec..9d8f43b28a 100644 --- a/drivers/net/mdio/mdio-ipq4019.c +++ b/drivers/net/mdio/mdio-ipq4019.c @@ -14,6 +14,20 @@ #include #define MDIO_MODE_REG 0x40 +#define MDIO_MODE_MDC_MODE BIT(12) +/* 0 = Clause 22, 1 = Clause 45 */ +#define MDIO_MODE_C45 BIT(8) +#define MDIO_MODE_DIV_MASK GENMASK(7, 0) +#define MDIO_MODE_DIV(x) FIELD_PREP(MDIO_MODE_DIV_MASK, (x) - 1) +#define MDIO_MODE_DIV_1 0x0 +#define MDIO_MODE_DIV_2 0x1 +#define MDIO_MODE_DIV_4 0x3 +#define MDIO_MODE_DIV_8 0x7 +#define MDIO_MODE_DIV_16 0xf +#define MDIO_MODE_DIV_32 0x1f +#define MDIO_MODE_DIV_64 0x3f +#define MDIO_MODE_DIV_128 0x7f +#define MDIO_MODE_DIV_256 0xff #define MDIO_ADDR_REG 0x44 #define MDIO_DATA_WRITE_REG 0x48 #define MDIO_DATA_READ_REG 0x4c @@ -26,9 +40,6 @@ #define MDIO_CMD_ACCESS_CODE_C45_WRITE 1 #define MDIO_CMD_ACCESS_CODE_C45_READ 2 -/* 0 = Clause 22, 1 = Clause 45 */ -#define MDIO_MODE_C45 BIT(8) - #define IPQ4019_MDIO_TIMEOUT 10000 #define IPQ4019_MDIO_SLEEP 10 @@ -41,6 +52,7 @@ struct ipq4019_mdio_data { void __iomem *membase; void __iomem *eth_ldo_rdy; struct clk *mdio_clk; + unsigned int mdc_rate; }; static int ipq4019_mdio_wait_busy(struct mii_bus *bus) @@ -203,6 +215,38 @@ static int ipq4019_mdio_write_c22(struct mii_bus *bus, int mii_id, int regnum, return 0; } +static int ipq4019_mdio_set_div(struct ipq4019_mdio_data *priv) +{ + unsigned long ahb_rate; + int div; + u32 val; + + /* If we don't have a clock for AHB use the fixed value */ + ahb_rate = IPQ_MDIO_CLK_RATE; + if (priv->mdio_clk) + ahb_rate = clk_get_rate(priv->mdio_clk); + + /* MDC rate is ahb_rate/(MDIO_MODE_DIV + 1) + * While supported, internal documentation doesn't + * assure correct functionality of the MDIO bus + * with divider of 1, 2 or 4. + */ + for (div = 8; div <= 256; div *= 2) { + /* The requested rate is supported by the div */ + if (priv->mdc_rate == DIV_ROUND_UP(ahb_rate, div)) { + val = readl(priv->membase + MDIO_MODE_REG); + val &= ~MDIO_MODE_DIV_MASK; + val |= MDIO_MODE_DIV(div); + writel(val, priv->membase + MDIO_MODE_REG); + + return 0; + } + } + + /* The requested rate is not supported */ + return -EINVAL; +} + static int ipq_mdio_reset(struct mii_bus *bus) { struct ipq4019_mdio_data *priv = bus->priv; @@ -225,10 +269,58 @@ static int ipq_mdio_reset(struct mii_bus *bus) return ret; ret = clk_prepare_enable(priv->mdio_clk); - if (ret == 0) - mdelay(10); + if (ret) + return ret; - return ret; + mdelay(10); + + /* Restore MDC rate */ + return ipq4019_mdio_set_div(priv); +} + +static void ipq4019_mdio_select_mdc_rate(struct platform_device *pdev, + struct ipq4019_mdio_data *priv) +{ + unsigned long ahb_rate; + int div; + u32 val; + + /* MDC rate defined in DT, we don't have to decide a default value */ + if (!of_property_read_u32(pdev->dev.of_node, "clock-frequency", + &priv->mdc_rate)) + return; + + /* If we don't have a clock for AHB use the fixed value */ + ahb_rate = IPQ_MDIO_CLK_RATE; + if (priv->mdio_clk) + ahb_rate = clk_get_rate(priv->mdio_clk); + + /* Check what is the current div set */ + val = readl(priv->membase + MDIO_MODE_REG); + div = FIELD_GET(MDIO_MODE_DIV_MASK, val); + + /* div is not set to the default value of /256 + * Probably someone changed that (bootloader, other drivers) + * Keep this and don't overwrite it. + */ + if (div != MDIO_MODE_DIV_256) { + priv->mdc_rate = DIV_ROUND_UP(ahb_rate, div + 1); + return; + } + + /* If div is /256 assume nobody have set this value and + * try to find one MDC rate that is close the 802.3 spec of + * 2.5MHz + */ + for (div = 256; div >= 8; div /= 2) { + /* Stop as soon as we found a divider that + * reached the closest value to 2.5MHz + */ + if (DIV_ROUND_UP(ahb_rate, div) > 2500000) + break; + + priv->mdc_rate = DIV_ROUND_UP(ahb_rate, div); + } } static int ipq4019_mdio_probe(struct platform_device *pdev) @@ -252,6 +344,11 @@ static int ipq4019_mdio_probe(struct platform_device *pdev) if (IS_ERR(priv->mdio_clk)) return PTR_ERR(priv->mdio_clk); + ipq4019_mdio_select_mdc_rate(pdev, priv); + ret = ipq4019_mdio_set_div(priv); + if (ret) + return ret; + /* The platform resource is provided on the chipset IPQ5018 */ /* This resource is optional */ res = platform_get_resource(pdev, IORESOURCE_MEM, 1); -- cgit v1.2.3