From 9ea788653ae1a5cea3f3853c5c50b58c98b3cd67 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Wed, 7 Aug 2024 15:13:35 +0200 Subject: Adding upstream version 6.9.8. Signed-off-by: Daniel Baumann --- drivers/net/phy/sfp.c | 18 ++++++------------ 1 file changed, 6 insertions(+), 12 deletions(-) (limited to 'drivers/net/phy/sfp.c') diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c index 52b71c7e78..e4b759690c 100644 --- a/drivers/net/phy/sfp.c +++ b/drivers/net/phy/sfp.c @@ -385,23 +385,18 @@ static void sfp_fixup_rollball(struct sfp *sfp) sfp->phy_t_retry = msecs_to_jiffies(1000); } -static void sfp_fixup_fs_2_5gt(struct sfp *sfp) +static void sfp_fixup_fs_10gt(struct sfp *sfp) { + sfp_fixup_10gbaset_30m(sfp); sfp_fixup_rollball(sfp); - /* The RollBall fixup is not enough for FS modules, the PHY chip inside + /* The RollBall fixup is not enough for FS modules, the AQR chip inside * them does not return 0xffff for PHY ID registers in all MMDs for the * while initializing. They need a 4 second wait before accessing PHY. */ sfp->module_t_wait = msecs_to_jiffies(4000); } -static void sfp_fixup_fs_10gt(struct sfp *sfp) -{ - sfp_fixup_10gbaset_30m(sfp); - sfp_fixup_fs_2_5gt(sfp); -} - static void sfp_fixup_halny_gsfp(struct sfp *sfp) { /* Ignore the TX_FAULT and LOS signals on this module. @@ -477,10 +472,6 @@ static const struct sfp_quirk sfp_quirks[] = { // Rollball protocol to talk to the PHY. SFP_QUIRK_F("FS", "SFP-10G-T", sfp_fixup_fs_10gt), - // Fiberstore SFP-2.5G-T uses Rollball protocol to talk to the PHY and - // needs 4 sec wait before probing the PHY. - SFP_QUIRK_F("FS", "SFP-2.5G-T", sfp_fixup_fs_2_5gt), - // Fiberstore GPON-ONU-34-20BI can operate at 2500base-X, but report 1.2GBd // NRZ in their EEPROM SFP_QUIRK("FS", "GPON-ONU-34-20BI", sfp_quirk_2500basex, @@ -497,6 +488,9 @@ static const struct sfp_quirk sfp_quirks[] = { SFP_QUIRK("HUAWEI", "MA5671A", sfp_quirk_2500basex, sfp_fixup_ignore_tx_fault), + // FS 2.5G Base-T + SFP_QUIRK_M("FS", "SFP-2.5G-T", sfp_quirk_oem_2_5g), + // Lantech 8330-262D-E can operate at 2500base-X, but incorrectly report // 2500MBd NRZ in their EEPROM SFP_QUIRK_M("Lantech", "8330-262D-E", sfp_quirk_2500basex), -- cgit v1.2.3