From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- drivers/net/wireless/intel/iwlegacy/4965.h | 1265 ++++++++++++++++++++++++++++ 1 file changed, 1265 insertions(+) create mode 100644 drivers/net/wireless/intel/iwlegacy/4965.h (limited to 'drivers/net/wireless/intel/iwlegacy/4965.h') diff --git a/drivers/net/wireless/intel/iwlegacy/4965.h b/drivers/net/wireless/intel/iwlegacy/4965.h new file mode 100644 index 0000000000..863e3792d1 --- /dev/null +++ b/drivers/net/wireless/intel/iwlegacy/4965.h @@ -0,0 +1,1265 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/****************************************************************************** + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * Contact Information: + * Intel Linux Wireless + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + *****************************************************************************/ + +#ifndef __il_4965_h__ +#define __il_4965_h__ + +struct il_rx_queue; +struct il_rx_buf; +struct il_rx_pkt; +struct il_tx_queue; +struct il_rxon_context; + +/* configuration for the _4965 devices */ +extern struct il_cfg il4965_cfg; +extern const struct il_ops il4965_ops; + +extern struct il_mod_params il4965_mod_params; + +/* tx queue */ +void il4965_free_tfds_in_queue(struct il_priv *il, int sta_id, int tid, + int freed); + +/* RXON */ +void il4965_set_rxon_chain(struct il_priv *il); + +/* uCode */ +int il4965_verify_ucode(struct il_priv *il); + +/* lib */ +void il4965_check_abort_status(struct il_priv *il, u8 frame_count, u32 status); + +void il4965_rx_queue_reset(struct il_priv *il, struct il_rx_queue *rxq); +int il4965_rx_init(struct il_priv *il, struct il_rx_queue *rxq); +int il4965_hw_nic_init(struct il_priv *il); +int il4965_dump_fh(struct il_priv *il, char **buf, bool display); + +void il4965_nic_config(struct il_priv *il); + +/* rx */ +void il4965_rx_queue_restock(struct il_priv *il); +void il4965_rx_replenish(struct il_priv *il); +void il4965_rx_replenish_now(struct il_priv *il); +void il4965_rx_queue_free(struct il_priv *il, struct il_rx_queue *rxq); +int il4965_rxq_stop(struct il_priv *il); +int il4965_hwrate_to_mac80211_idx(u32 rate_n_flags, enum nl80211_band band); +void il4965_rx_handle(struct il_priv *il); + +/* tx */ +void il4965_hw_txq_free_tfd(struct il_priv *il, struct il_tx_queue *txq); +int il4965_hw_txq_attach_buf_to_tfd(struct il_priv *il, struct il_tx_queue *txq, + dma_addr_t addr, u16 len, u8 reset, u8 pad); +int il4965_hw_tx_queue_init(struct il_priv *il, struct il_tx_queue *txq); +void il4965_hwrate_to_tx_control(struct il_priv *il, u32 rate_n_flags, + struct ieee80211_tx_info *info); +int il4965_tx_skb(struct il_priv *il, + struct ieee80211_sta *sta, + struct sk_buff *skb); +int il4965_tx_agg_start(struct il_priv *il, struct ieee80211_vif *vif, + struct ieee80211_sta *sta, u16 tid, u16 * ssn); +int il4965_tx_agg_stop(struct il_priv *il, struct ieee80211_vif *vif, + struct ieee80211_sta *sta, u16 tid); +int il4965_txq_check_empty(struct il_priv *il, int sta_id, u8 tid, int txq_id); +int il4965_tx_queue_reclaim(struct il_priv *il, int txq_id, int idx); +void il4965_hw_txq_ctx_free(struct il_priv *il); +int il4965_txq_ctx_alloc(struct il_priv *il); +void il4965_txq_ctx_reset(struct il_priv *il); +void il4965_txq_ctx_stop(struct il_priv *il); +void il4965_txq_set_sched(struct il_priv *il, u32 mask); + +/* + * Acquire il->lock before calling this function ! + */ +void il4965_set_wr_ptrs(struct il_priv *il, int txq_id, u32 idx); +/** + * il4965_tx_queue_set_status - (optionally) start Tx/Cmd queue + * @tx_fifo_id: Tx DMA/FIFO channel (range 0-7) that the queue will feed + * @scd_retry: (1) Indicates queue will be used in aggregation mode + * + * NOTE: Acquire il->lock before calling this function ! + */ +void il4965_tx_queue_set_status(struct il_priv *il, struct il_tx_queue *txq, + int tx_fifo_id, int scd_retry); + +/* scan */ +int il4965_request_scan(struct il_priv *il, struct ieee80211_vif *vif); + +/* station mgmt */ +int il4965_manage_ibss_station(struct il_priv *il, struct ieee80211_vif *vif, + bool add); + +/* hcmd */ +int il4965_send_beacon_cmd(struct il_priv *il); + +#ifdef CONFIG_IWLEGACY_DEBUG +const char *il4965_get_tx_fail_reason(u32 status); +#else +static inline const char * +il4965_get_tx_fail_reason(u32 status) +{ + return ""; +} +#endif + +/* station management */ +int il4965_alloc_bcast_station(struct il_priv *il); +int il4965_add_bssid_station(struct il_priv *il, const u8 *addr, u8 *sta_id_r); +int il4965_remove_default_wep_key(struct il_priv *il, + struct ieee80211_key_conf *key); +int il4965_set_default_wep_key(struct il_priv *il, + struct ieee80211_key_conf *key); +int il4965_restore_default_wep_keys(struct il_priv *il); +int il4965_set_dynamic_key(struct il_priv *il, + struct ieee80211_key_conf *key, u8 sta_id); +int il4965_remove_dynamic_key(struct il_priv *il, + struct ieee80211_key_conf *key, u8 sta_id); +void il4965_update_tkip_key(struct il_priv *il, + struct ieee80211_key_conf *keyconf, + struct ieee80211_sta *sta, u32 iv32, + u16 *phase1key); +int il4965_sta_tx_modify_enable_tid(struct il_priv *il, int sta_id, int tid); +int il4965_sta_rx_agg_start(struct il_priv *il, struct ieee80211_sta *sta, + int tid, u16 ssn); +int il4965_sta_rx_agg_stop(struct il_priv *il, struct ieee80211_sta *sta, + int tid); +void il4965_sta_modify_sleep_tx_count(struct il_priv *il, int sta_id, int cnt); +int il4965_update_bcast_stations(struct il_priv *il); + +/* rate */ +static inline u8 +il4965_hw_get_rate(__le32 rate_n_flags) +{ + return le32_to_cpu(rate_n_flags) & 0xFF; +} + +/* eeprom */ +void il4965_eeprom_get_mac(const struct il_priv *il, u8 * mac); +int il4965_eeprom_acquire_semaphore(struct il_priv *il); +void il4965_eeprom_release_semaphore(struct il_priv *il); +int il4965_eeprom_check_version(struct il_priv *il); + +/* mac80211 handlers (for 4965) */ +void il4965_mac_tx(struct ieee80211_hw *hw, + struct ieee80211_tx_control *control, + struct sk_buff *skb); +int il4965_mac_start(struct ieee80211_hw *hw); +void il4965_mac_stop(struct ieee80211_hw *hw); +void il4965_configure_filter(struct ieee80211_hw *hw, + unsigned int changed_flags, + unsigned int *total_flags, u64 multicast); +int il4965_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, + struct ieee80211_vif *vif, struct ieee80211_sta *sta, + struct ieee80211_key_conf *key); +void il4965_mac_update_tkip_key(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_key_conf *keyconf, + struct ieee80211_sta *sta, u32 iv32, + u16 *phase1key); +int il4965_mac_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + struct ieee80211_ampdu_params *params); +int il4965_mac_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + struct ieee80211_sta *sta); +void +il4965_mac_channel_switch(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + struct ieee80211_channel_switch *ch_switch); + +void il4965_led_enable(struct il_priv *il); + +/* EEPROM */ +#define IL4965_EEPROM_IMG_SIZE 1024 + +/* + * uCode queue management definitions ... + * The first queue used for block-ack aggregation is #7 (4965 only). + * All block-ack aggregation queues should map to Tx DMA/FIFO channel 7. + */ +#define IL49_FIRST_AMPDU_QUEUE 7 + +/* Sizes and addresses for instruction and data memory (SRAM) in + * 4965's embedded processor. Driver access is via HBUS_TARG_MEM_* regs. */ +#define IL49_RTC_INST_LOWER_BOUND (0x000000) +#define IL49_RTC_INST_UPPER_BOUND (0x018000) + +#define IL49_RTC_DATA_LOWER_BOUND (0x800000) +#define IL49_RTC_DATA_UPPER_BOUND (0x80A000) + +#define IL49_RTC_INST_SIZE (IL49_RTC_INST_UPPER_BOUND - \ + IL49_RTC_INST_LOWER_BOUND) +#define IL49_RTC_DATA_SIZE (IL49_RTC_DATA_UPPER_BOUND - \ + IL49_RTC_DATA_LOWER_BOUND) + +#define IL49_MAX_INST_SIZE IL49_RTC_INST_SIZE +#define IL49_MAX_DATA_SIZE IL49_RTC_DATA_SIZE + +/* Size of uCode instruction memory in bootstrap state machine */ +#define IL49_MAX_BSM_SIZE BSM_SRAM_SIZE + +static inline int +il4965_hw_valid_rtc_data_addr(u32 addr) +{ + return (addr >= IL49_RTC_DATA_LOWER_BOUND && + addr < IL49_RTC_DATA_UPPER_BOUND); +} + +/********************* START TEMPERATURE *************************************/ + +/** + * 4965 temperature calculation. + * + * The driver must calculate the device temperature before calculating + * a txpower setting (amplifier gain is temperature dependent). The + * calculation uses 4 measurements, 3 of which (R1, R2, R3) are calibration + * values used for the life of the driver, and one of which (R4) is the + * real-time temperature indicator. + * + * uCode provides all 4 values to the driver via the "initialize alive" + * notification (see struct il4965_init_alive_resp). After the runtime uCode + * image loads, uCode updates the R4 value via stats notifications + * (see N_STATS), which occur after each received beacon + * when associated, or can be requested via C_STATS. + * + * NOTE: uCode provides the R4 value as a 23-bit signed value. Driver + * must sign-extend to 32 bits before applying formula below. + * + * Formula: + * + * degrees Kelvin = ((97 * 259 * (R4 - R2) / (R3 - R1)) / 100) + 8 + * + * NOTE: The basic formula is 259 * (R4-R2) / (R3-R1). The 97/100 is + * an additional correction, which should be centered around 0 degrees + * Celsius (273 degrees Kelvin). The 8 (3 percent of 273) compensates for + * centering the 97/100 correction around 0 degrees K. + * + * Add 273 to Kelvin value to find degrees Celsius, for comparing current + * temperature with factory-measured temperatures when calculating txpower + * settings. + */ +#define TEMPERATURE_CALIB_KELVIN_OFFSET 8 +#define TEMPERATURE_CALIB_A_VAL 259 + +/* Limit range of calculated temperature to be between these Kelvin values */ +#define IL_TX_POWER_TEMPERATURE_MIN (263) +#define IL_TX_POWER_TEMPERATURE_MAX (410) + +#define IL_TX_POWER_TEMPERATURE_OUT_OF_RANGE(t) \ + ((t) < IL_TX_POWER_TEMPERATURE_MIN || \ + (t) > IL_TX_POWER_TEMPERATURE_MAX) + +void il4965_temperature_calib(struct il_priv *il); +/********************* END TEMPERATURE ***************************************/ + +/********************* START TXPOWER *****************************************/ + +/** + * 4965 txpower calculations rely on information from three sources: + * + * 1) EEPROM + * 2) "initialize" alive notification + * 3) stats notifications + * + * EEPROM data consists of: + * + * 1) Regulatory information (max txpower and channel usage flags) is provided + * separately for each channel that can possibly supported by 4965. + * 40 MHz wide (.11n HT40) channels are listed separately from 20 MHz + * (legacy) channels. + * + * See struct il4965_eeprom_channel for format, and struct il4965_eeprom + * for locations in EEPROM. + * + * 2) Factory txpower calibration information is provided separately for + * sub-bands of contiguous channels. 2.4GHz has just one sub-band, + * but 5 GHz has several sub-bands. + * + * In addition, per-band (2.4 and 5 Ghz) saturation txpowers are provided. + * + * See struct il4965_eeprom_calib_info (and the tree of structures + * contained within it) for format, and struct il4965_eeprom for + * locations in EEPROM. + * + * "Initialization alive" notification (see struct il4965_init_alive_resp) + * consists of: + * + * 1) Temperature calculation parameters. + * + * 2) Power supply voltage measurement. + * + * 3) Tx gain compensation to balance 2 transmitters for MIMO use. + * + * Statistics notifications deliver: + * + * 1) Current values for temperature param R4. + */ + +/** + * To calculate a txpower setting for a given desired target txpower, channel, + * modulation bit rate, and transmitter chain (4965 has 2 transmitters to + * support MIMO and transmit diversity), driver must do the following: + * + * 1) Compare desired txpower vs. (EEPROM) regulatory limit for this channel. + * Do not exceed regulatory limit; reduce target txpower if necessary. + * + * If setting up txpowers for MIMO rates (rate idxes 8-15, 24-31), + * 2 transmitters will be used simultaneously; driver must reduce the + * regulatory limit by 3 dB (half-power) for each transmitter, so the + * combined total output of the 2 transmitters is within regulatory limits. + * + * + * 2) Compare target txpower vs. (EEPROM) saturation txpower *reduced by + * backoff for this bit rate*. Do not exceed (saturation - backoff[rate]); + * reduce target txpower if necessary. + * + * Backoff values below are in 1/2 dB units (equivalent to steps in + * txpower gain tables): + * + * OFDM 6 - 36 MBit: 10 steps (5 dB) + * OFDM 48 MBit: 15 steps (7.5 dB) + * OFDM 54 MBit: 17 steps (8.5 dB) + * OFDM 60 MBit: 20 steps (10 dB) + * CCK all rates: 10 steps (5 dB) + * + * Backoff values apply to saturation txpower on a per-transmitter basis; + * when using MIMO (2 transmitters), each transmitter uses the same + * saturation level provided in EEPROM, and the same backoff values; + * no reduction (such as with regulatory txpower limits) is required. + * + * Saturation and Backoff values apply equally to 20 Mhz (legacy) channel + * widths and 40 Mhz (.11n HT40) channel widths; there is no separate + * factory measurement for ht40 channels. + * + * The result of this step is the final target txpower. The rest of + * the steps figure out the proper settings for the device to achieve + * that target txpower. + * + * + * 3) Determine (EEPROM) calibration sub band for the target channel, by + * comparing against first and last channels in each sub band + * (see struct il4965_eeprom_calib_subband_info). + * + * + * 4) Linearly interpolate (EEPROM) factory calibration measurement sets, + * referencing the 2 factory-measured (sample) channels within the sub band. + * + * Interpolation is based on difference between target channel's frequency + * and the sample channels' frequencies. Since channel numbers are based + * on frequency (5 MHz between each channel number), this is equivalent + * to interpolating based on channel number differences. + * + * Note that the sample channels may or may not be the channels at the + * edges of the sub band. The target channel may be "outside" of the + * span of the sampled channels. + * + * Driver may choose the pair (for 2 Tx chains) of measurements (see + * struct il4965_eeprom_calib_ch_info) for which the actual measured + * txpower comes closest to the desired txpower. Usually, though, + * the middle set of measurements is closest to the regulatory limits, + * and is therefore a good choice for all txpower calculations (this + * assumes that high accuracy is needed for maximizing legal txpower, + * while lower txpower configurations do not need as much accuracy). + * + * Driver should interpolate both members of the chosen measurement pair, + * i.e. for both Tx chains (radio transmitters), unless the driver knows + * that only one of the chains will be used (e.g. only one tx antenna + * connected, but this should be unusual). The rate scaling algorithm + * switches antennas to find best performance, so both Tx chains will + * be used (although only one at a time) even for non-MIMO transmissions. + * + * Driver should interpolate factory values for temperature, gain table + * idx, and actual power. The power amplifier detector values are + * not used by the driver. + * + * Sanity check: If the target channel happens to be one of the sample + * channels, the results should agree with the sample channel's + * measurements! + * + * + * 5) Find difference between desired txpower and (interpolated) + * factory-measured txpower. Using (interpolated) factory gain table idx + * (shown elsewhere) as a starting point, adjust this idx lower to + * increase txpower, or higher to decrease txpower, until the target + * txpower is reached. Each step in the gain table is 1/2 dB. + * + * For example, if factory measured txpower is 16 dBm, and target txpower + * is 13 dBm, add 6 steps to the factory gain idx to reduce txpower + * by 3 dB. + * + * + * 6) Find difference between current device temperature and (interpolated) + * factory-measured temperature for sub-band. Factory values are in + * degrees Celsius. To calculate current temperature, see comments for + * "4965 temperature calculation". + * + * If current temperature is higher than factory temperature, driver must + * increase gain (lower gain table idx), and vice verse. + * + * Temperature affects gain differently for different channels: + * + * 2.4 GHz all channels: 3.5 degrees per half-dB step + * 5 GHz channels 34-43: 4.5 degrees per half-dB step + * 5 GHz channels >= 44: 4.0 degrees per half-dB step + * + * NOTE: Temperature can increase rapidly when transmitting, especially + * with heavy traffic at high txpowers. Driver should update + * temperature calculations often under these conditions to + * maintain strong txpower in the face of rising temperature. + * + * + * 7) Find difference between current power supply voltage indicator + * (from "initialize alive") and factory-measured power supply voltage + * indicator (EEPROM). + * + * If the current voltage is higher (indicator is lower) than factory + * voltage, gain should be reduced (gain table idx increased) by: + * + * (eeprom - current) / 7 + * + * If the current voltage is lower (indicator is higher) than factory + * voltage, gain should be increased (gain table idx decreased) by: + * + * 2 * (current - eeprom) / 7 + * + * If number of idx steps in either direction turns out to be > 2, + * something is wrong ... just use 0. + * + * NOTE: Voltage compensation is independent of band/channel. + * + * NOTE: "Initialize" uCode measures current voltage, which is assumed + * to be constant after this initial measurement. Voltage + * compensation for txpower (number of steps in gain table) + * may be calculated once and used until the next uCode bootload. + * + * + * 8) If setting up txpowers for MIMO rates (rate idxes 8-15, 24-31), + * adjust txpower for each transmitter chain, so txpower is balanced + * between the two chains. There are 5 pairs of tx_atten[group][chain] + * values in "initialize alive", one pair for each of 5 channel ranges: + * + * Group 0: 5 GHz channel 34-43 + * Group 1: 5 GHz channel 44-70 + * Group 2: 5 GHz channel 71-124 + * Group 3: 5 GHz channel 125-200 + * Group 4: 2.4 GHz all channels + * + * Add the tx_atten[group][chain] value to the idx for the target chain. + * The values are signed, but are in pairs of 0 and a non-negative number, + * so as to reduce gain (if necessary) of the "hotter" channel. This + * avoids any need to double-check for regulatory compliance after + * this step. + * + * + * 9) If setting up for a CCK rate, lower the gain by adding a CCK compensation + * value to the idx: + * + * Hardware rev B: 9 steps (4.5 dB) + * Hardware rev C: 5 steps (2.5 dB) + * + * Hardware rev for 4965 can be determined by reading CSR_HW_REV_WA_REG, + * bits [3:2], 1 = B, 2 = C. + * + * NOTE: This compensation is in addition to any saturation backoff that + * might have been applied in an earlier step. + * + * + * 10) Select the gain table, based on band (2.4 vs 5 GHz). + * + * Limit the adjusted idx to stay within the table! + * + * + * 11) Read gain table entries for DSP and radio gain, place into appropriate + * location(s) in command (struct il4965_txpowertable_cmd). + */ + +/** + * When MIMO is used (2 transmitters operating simultaneously), driver should + * limit each transmitter to deliver a max of 3 dB below the regulatory limit + * for the device. That is, use half power for each transmitter, so total + * txpower is within regulatory limits. + * + * The value "6" represents number of steps in gain table to reduce power 3 dB. + * Each step is 1/2 dB. + */ +#define IL_TX_POWER_MIMO_REGULATORY_COMPENSATION (6) + +/** + * CCK gain compensation. + * + * When calculating txpowers for CCK, after making sure that the target power + * is within regulatory and saturation limits, driver must additionally + * back off gain by adding these values to the gain table idx. + * + * Hardware rev for 4965 can be determined by reading CSR_HW_REV_WA_REG, + * bits [3:2], 1 = B, 2 = C. + */ +#define IL_TX_POWER_CCK_COMPENSATION_B_STEP (9) +#define IL_TX_POWER_CCK_COMPENSATION_C_STEP (5) + +/* + * 4965 power supply voltage compensation for txpower + */ +#define TX_POWER_IL_VOLTAGE_CODES_PER_03V (7) + +/** + * Gain tables. + * + * The following tables contain pair of values for setting txpower, i.e. + * gain settings for the output of the device's digital signal processor (DSP), + * and for the analog gain structure of the transmitter. + * + * Each entry in the gain tables represents a step of 1/2 dB. Note that these + * are *relative* steps, not indications of absolute output power. Output + * power varies with temperature, voltage, and channel frequency, and also + * requires consideration of average power (to satisfy regulatory constraints), + * and peak power (to avoid distortion of the output signal). + * + * Each entry contains two values: + * 1) DSP gain (or sometimes called DSP attenuation). This is a fine-grained + * linear value that multiplies the output of the digital signal processor, + * before being sent to the analog radio. + * 2) Radio gain. This sets the analog gain of the radio Tx path. + * It is a coarser setting, and behaves in a logarithmic (dB) fashion. + * + * EEPROM contains factory calibration data for txpower. This maps actual + * measured txpower levels to gain settings in the "well known" tables + * below ("well-known" means here that both factory calibration *and* the + * driver work with the same table). + * + * There are separate tables for 2.4 GHz and 5 GHz bands. The 5 GHz table + * has an extension (into negative idxes), in case the driver needs to + * boost power setting for high device temperatures (higher than would be + * present during factory calibration). A 5 Ghz EEPROM idx of "40" + * corresponds to the 49th entry in the table used by the driver. + */ +#define MIN_TX_GAIN_IDX (0) /* highest gain, lowest idx, 2.4 */ +#define MIN_TX_GAIN_IDX_52GHZ_EXT (-9) /* highest gain, lowest idx, 5 */ + +/** + * 2.4 GHz gain table + * + * Index Dsp gain Radio gain + * 0 110 0x3f (highest gain) + * 1 104 0x3f + * 2 98 0x3f + * 3 110 0x3e + * 4 104 0x3e + * 5 98 0x3e + * 6 110 0x3d + * 7 104 0x3d + * 8 98 0x3d + * 9 110 0x3c + * 10 104 0x3c + * 11 98 0x3c + * 12 110 0x3b + * 13 104 0x3b + * 14 98 0x3b + * 15 110 0x3a + * 16 104 0x3a + * 17 98 0x3a + * 18 110 0x39 + * 19 104 0x39 + * 20 98 0x39 + * 21 110 0x38 + * 22 104 0x38 + * 23 98 0x38 + * 24 110 0x37 + * 25 104 0x37 + * 26 98 0x37 + * 27 110 0x36 + * 28 104 0x36 + * 29 98 0x36 + * 30 110 0x35 + * 31 104 0x35 + * 32 98 0x35 + * 33 110 0x34 + * 34 104 0x34 + * 35 98 0x34 + * 36 110 0x33 + * 37 104 0x33 + * 38 98 0x33 + * 39 110 0x32 + * 40 104 0x32 + * 41 98 0x32 + * 42 110 0x31 + * 43 104 0x31 + * 44 98 0x31 + * 45 110 0x30 + * 46 104 0x30 + * 47 98 0x30 + * 48 110 0x6 + * 49 104 0x6 + * 50 98 0x6 + * 51 110 0x5 + * 52 104 0x5 + * 53 98 0x5 + * 54 110 0x4 + * 55 104 0x4 + * 56 98 0x4 + * 57 110 0x3 + * 58 104 0x3 + * 59 98 0x3 + * 60 110 0x2 + * 61 104 0x2 + * 62 98 0x2 + * 63 110 0x1 + * 64 104 0x1 + * 65 98 0x1 + * 66 110 0x0 + * 67 104 0x0 + * 68 98 0x0 + * 69 97 0 + * 70 96 0 + * 71 95 0 + * 72 94 0 + * 73 93 0 + * 74 92 0 + * 75 91 0 + * 76 90 0 + * 77 89 0 + * 78 88 0 + * 79 87 0 + * 80 86 0 + * 81 85 0 + * 82 84 0 + * 83 83 0 + * 84 82 0 + * 85 81 0 + * 86 80 0 + * 87 79 0 + * 88 78 0 + * 89 77 0 + * 90 76 0 + * 91 75 0 + * 92 74 0 + * 93 73 0 + * 94 72 0 + * 95 71 0 + * 96 70 0 + * 97 69 0 + * 98 68 0 + */ + +/** + * 5 GHz gain table + * + * Index Dsp gain Radio gain + * -9 123 0x3F (highest gain) + * -8 117 0x3F + * -7 110 0x3F + * -6 104 0x3F + * -5 98 0x3F + * -4 110 0x3E + * -3 104 0x3E + * -2 98 0x3E + * -1 110 0x3D + * 0 104 0x3D + * 1 98 0x3D + * 2 110 0x3C + * 3 104 0x3C + * 4 98 0x3C + * 5 110 0x3B + * 6 104 0x3B + * 7 98 0x3B + * 8 110 0x3A + * 9 104 0x3A + * 10 98 0x3A + * 11 110 0x39 + * 12 104 0x39 + * 13 98 0x39 + * 14 110 0x38 + * 15 104 0x38 + * 16 98 0x38 + * 17 110 0x37 + * 18 104 0x37 + * 19 98 0x37 + * 20 110 0x36 + * 21 104 0x36 + * 22 98 0x36 + * 23 110 0x35 + * 24 104 0x35 + * 25 98 0x35 + * 26 110 0x34 + * 27 104 0x34 + * 28 98 0x34 + * 29 110 0x33 + * 30 104 0x33 + * 31 98 0x33 + * 32 110 0x32 + * 33 104 0x32 + * 34 98 0x32 + * 35 110 0x31 + * 36 104 0x31 + * 37 98 0x31 + * 38 110 0x30 + * 39 104 0x30 + * 40 98 0x30 + * 41 110 0x25 + * 42 104 0x25 + * 43 98 0x25 + * 44 110 0x24 + * 45 104 0x24 + * 46 98 0x24 + * 47 110 0x23 + * 48 104 0x23 + * 49 98 0x23 + * 50 110 0x22 + * 51 104 0x18 + * 52 98 0x18 + * 53 110 0x17 + * 54 104 0x17 + * 55 98 0x17 + * 56 110 0x16 + * 57 104 0x16 + * 58 98 0x16 + * 59 110 0x15 + * 60 104 0x15 + * 61 98 0x15 + * 62 110 0x14 + * 63 104 0x14 + * 64 98 0x14 + * 65 110 0x13 + * 66 104 0x13 + * 67 98 0x13 + * 68 110 0x12 + * 69 104 0x08 + * 70 98 0x08 + * 71 110 0x07 + * 72 104 0x07 + * 73 98 0x07 + * 74 110 0x06 + * 75 104 0x06 + * 76 98 0x06 + * 77 110 0x05 + * 78 104 0x05 + * 79 98 0x05 + * 80 110 0x04 + * 81 104 0x04 + * 82 98 0x04 + * 83 110 0x03 + * 84 104 0x03 + * 85 98 0x03 + * 86 110 0x02 + * 87 104 0x02 + * 88 98 0x02 + * 89 110 0x01 + * 90 104 0x01 + * 91 98 0x01 + * 92 110 0x00 + * 93 104 0x00 + * 94 98 0x00 + * 95 93 0x00 + * 96 88 0x00 + * 97 83 0x00 + * 98 78 0x00 + */ + +/** + * Sanity checks and default values for EEPROM regulatory levels. + * If EEPROM values fall outside MIN/MAX range, use default values. + * + * Regulatory limits refer to the maximum average txpower allowed by + * regulatory agencies in the geographies in which the device is meant + * to be operated. These limits are SKU-specific (i.e. geography-specific), + * and channel-specific; each channel has an individual regulatory limit + * listed in the EEPROM. + * + * Units are in half-dBm (i.e. "34" means 17 dBm). + */ +#define IL_TX_POWER_DEFAULT_REGULATORY_24 (34) +#define IL_TX_POWER_DEFAULT_REGULATORY_52 (34) +#define IL_TX_POWER_REGULATORY_MIN (0) +#define IL_TX_POWER_REGULATORY_MAX (34) + +/** + * Sanity checks and default values for EEPROM saturation levels. + * If EEPROM values fall outside MIN/MAX range, use default values. + * + * Saturation is the highest level that the output power amplifier can produce + * without significant clipping distortion. This is a "peak" power level. + * Different types of modulation (i.e. various "rates", and OFDM vs. CCK) + * require differing amounts of backoff, relative to their average power output, + * in order to avoid clipping distortion. + * + * Driver must make sure that it is violating neither the saturation limit, + * nor the regulatory limit, when calculating Tx power settings for various + * rates. + * + * Units are in half-dBm (i.e. "38" means 19 dBm). + */ +#define IL_TX_POWER_DEFAULT_SATURATION_24 (38) +#define IL_TX_POWER_DEFAULT_SATURATION_52 (38) +#define IL_TX_POWER_SATURATION_MIN (20) +#define IL_TX_POWER_SATURATION_MAX (50) + +/** + * Channel groups used for Tx Attenuation calibration (MIMO tx channel balance) + * and thermal Txpower calibration. + * + * When calculating txpower, driver must compensate for current device + * temperature; higher temperature requires higher gain. Driver must calculate + * current temperature (see "4965 temperature calculation"), then compare vs. + * factory calibration temperature in EEPROM; if current temperature is higher + * than factory temperature, driver must *increase* gain by proportions shown + * in table below. If current temperature is lower than factory, driver must + * *decrease* gain. + * + * Different frequency ranges require different compensation, as shown below. + */ +/* Group 0, 5.2 GHz ch 34-43: 4.5 degrees per 1/2 dB. */ +#define CALIB_IL_TX_ATTEN_GR1_FCH 34 +#define CALIB_IL_TX_ATTEN_GR1_LCH 43 + +/* Group 1, 5.3 GHz ch 44-70: 4.0 degrees per 1/2 dB. */ +#define CALIB_IL_TX_ATTEN_GR2_FCH 44 +#define CALIB_IL_TX_ATTEN_GR2_LCH 70 + +/* Group 2, 5.5 GHz ch 71-124: 4.0 degrees per 1/2 dB. */ +#define CALIB_IL_TX_ATTEN_GR3_FCH 71 +#define CALIB_IL_TX_ATTEN_GR3_LCH 124 + +/* Group 3, 5.7 GHz ch 125-200: 4.0 degrees per 1/2 dB. */ +#define CALIB_IL_TX_ATTEN_GR4_FCH 125 +#define CALIB_IL_TX_ATTEN_GR4_LCH 200 + +/* Group 4, 2.4 GHz all channels: 3.5 degrees per 1/2 dB. */ +#define CALIB_IL_TX_ATTEN_GR5_FCH 1 +#define CALIB_IL_TX_ATTEN_GR5_LCH 20 + +enum { + CALIB_CH_GROUP_1 = 0, + CALIB_CH_GROUP_2 = 1, + CALIB_CH_GROUP_3 = 2, + CALIB_CH_GROUP_4 = 3, + CALIB_CH_GROUP_5 = 4, + CALIB_CH_GROUP_MAX +}; + +/********************* END TXPOWER *****************************************/ + +/** + * Tx/Rx Queues + * + * Most communication between driver and 4965 is via queues of data buffers. + * For example, all commands that the driver issues to device's embedded + * controller (uCode) are via the command queue (one of the Tx queues). All + * uCode command responses/replies/notifications, including Rx frames, are + * conveyed from uCode to driver via the Rx queue. + * + * Most support for these queues, including handshake support, resides in + * structures in host DRAM, shared between the driver and the device. When + * allocating this memory, the driver must make sure that data written by + * the host CPU updates DRAM immediately (and does not get "stuck" in CPU's + * cache memory), so DRAM and cache are consistent, and the device can + * immediately see changes made by the driver. + * + * 4965 supports up to 16 DRAM-based Tx queues, and services these queues via + * up to 7 DMA channels (FIFOs). Each Tx queue is supported by a circular array + * in DRAM containing 256 Transmit Frame Descriptors (TFDs). + */ +#define IL49_NUM_FIFOS 7 +#define IL49_CMD_FIFO_NUM 4 +#define IL49_NUM_QUEUES 16 +#define IL49_NUM_AMPDU_QUEUES 8 + +/** + * struct il4965_schedq_bc_tbl + * + * Byte Count table + * + * Each Tx queue uses a byte-count table containing 320 entries: + * one 16-bit entry for each of 256 TFDs, plus an additional 64 entries that + * duplicate the first 64 entries (to avoid wrap-around within a Tx win; + * max Tx win is 64 TFDs). + * + * When driver sets up a new TFD, it must also enter the total byte count + * of the frame to be transmitted into the corresponding entry in the byte + * count table for the chosen Tx queue. If the TFD idx is 0-63, the driver + * must duplicate the byte count entry in corresponding idx 256-319. + * + * padding puts each byte count table on a 1024-byte boundary; + * 4965 assumes tables are separated by 1024 bytes. + */ +struct il4965_scd_bc_tbl { + __le16 tfd_offset[TFD_QUEUE_BC_SIZE]; + u8 pad[1024 - (TFD_QUEUE_BC_SIZE) * sizeof(__le16)]; +} __packed; + +#define IL4965_RTC_INST_LOWER_BOUND (0x000000) + +/* RSSI to dBm */ +#define IL4965_RSSI_OFFSET 44 + +/* PCI registers */ +#define PCI_CFG_RETRY_TIMEOUT 0x041 + +#define IL4965_DEFAULT_TX_RETRY 15 + +/* EEPROM */ +#define IL4965_FIRST_AMPDU_QUEUE 10 + +/* Calibration */ +void il4965_chain_noise_calibration(struct il_priv *il, void *stat_resp); +void il4965_sensitivity_calibration(struct il_priv *il, void *resp); +void il4965_init_sensitivity(struct il_priv *il); +void il4965_reset_run_time_calib(struct il_priv *il); + +/* Debug */ +#ifdef CONFIG_IWLEGACY_DEBUGFS +extern const struct il_debugfs_ops il4965_debugfs_ops; +#endif + +/****************************/ +/* Flow Handler Definitions */ +/****************************/ + +/** + * This I/O area is directly read/writable by driver (e.g. Linux uses writel()) + * Addresses are offsets from device's PCI hardware base address. + */ +#define FH49_MEM_LOWER_BOUND (0x1000) +#define FH49_MEM_UPPER_BOUND (0x2000) + +/** + * Keep-Warm (KW) buffer base address. + * + * Driver must allocate a 4KByte buffer that is used by 4965 for keeping the + * host DRAM powered on (via dummy accesses to DRAM) to maintain low-latency + * DRAM access when 4965 is Txing or Rxing. The dummy accesses prevent host + * from going into a power-savings mode that would cause higher DRAM latency, + * and possible data over/under-runs, before all Tx/Rx is complete. + * + * Driver loads FH49_KW_MEM_ADDR_REG with the physical address (bits 35:4) + * of the buffer, which must be 4K aligned. Once this is set up, the 4965 + * automatically invokes keep-warm accesses when normal accesses might not + * be sufficient to maintain fast DRAM response. + * + * Bit fields: + * 31-0: Keep-warm buffer physical base address [35:4], must be 4K aligned + */ +#define FH49_KW_MEM_ADDR_REG (FH49_MEM_LOWER_BOUND + 0x97C) + +/** + * TFD Circular Buffers Base (CBBC) addresses + * + * 4965 has 16 base pointer registers, one for each of 16 host-DRAM-resident + * circular buffers (CBs/queues) containing Transmit Frame Descriptors (TFDs) + * (see struct il_tfd_frame). These 16 pointer registers are offset by 0x04 + * bytes from one another. Each TFD circular buffer in DRAM must be 256-byte + * aligned (address bits 0-7 must be 0). + * + * Bit fields in each pointer register: + * 27-0: TFD CB physical base address [35:8], must be 256-byte aligned + */ +#define FH49_MEM_CBBC_LOWER_BOUND (FH49_MEM_LOWER_BOUND + 0x9D0) +#define FH49_MEM_CBBC_UPPER_BOUND (FH49_MEM_LOWER_BOUND + 0xA10) + +/* Find TFD CB base pointer for given queue (range 0-15). */ +#define FH49_MEM_CBBC_QUEUE(x) (FH49_MEM_CBBC_LOWER_BOUND + (x) * 0x4) + +/** + * Rx SRAM Control and Status Registers (RSCSR) + * + * These registers provide handshake between driver and 4965 for the Rx queue + * (this queue handles *all* command responses, notifications, Rx data, etc. + * sent from 4965 uCode to host driver). Unlike Tx, there is only one Rx + * queue, and only one Rx DMA/FIFO channel. Also unlike Tx, which can + * concatenate up to 20 DRAM buffers to form a Tx frame, each Receive Buffer + * Descriptor (RBD) points to only one Rx Buffer (RB); there is a 1:1 + * mapping between RBDs and RBs. + * + * Driver must allocate host DRAM memory for the following, and set the + * physical address of each into 4965 registers: + * + * 1) Receive Buffer Descriptor (RBD) circular buffer (CB), typically with 256 + * entries (although any power of 2, up to 4096, is selectable by driver). + * Each entry (1 dword) points to a receive buffer (RB) of consistent size + * (typically 4K, although 8K or 16K are also selectable by driver). + * Driver sets up RB size and number of RBDs in the CB via Rx config + * register FH49_MEM_RCSR_CHNL0_CONFIG_REG. + * + * Bit fields within one RBD: + * 27-0: Receive Buffer physical address bits [35:8], 256-byte aligned + * + * Driver sets physical address [35:8] of base of RBD circular buffer + * into FH49_RSCSR_CHNL0_RBDCB_BASE_REG [27:0]. + * + * 2) Rx status buffer, 8 bytes, in which 4965 indicates which Rx Buffers + * (RBs) have been filled, via a "write pointer", actually the idx of + * the RB's corresponding RBD within the circular buffer. Driver sets + * physical address [35:4] into FH49_RSCSR_CHNL0_STTS_WPTR_REG [31:0]. + * + * Bit fields in lower dword of Rx status buffer (upper dword not used + * by driver; see struct il4965_shared, val0): + * 31-12: Not used by driver + * 11- 0: Index of last filled Rx buffer descriptor + * (4965 writes, driver reads this value) + * + * As the driver prepares Receive Buffers (RBs) for 4965 to fill, driver must + * enter pointers to these RBs into contiguous RBD circular buffer entries, + * and update the 4965's "write" idx register, + * FH49_RSCSR_CHNL0_RBDCB_WPTR_REG. + * + * This "write" idx corresponds to the *next* RBD that the driver will make + * available, i.e. one RBD past the tail of the ready-to-fill RBDs within + * the circular buffer. This value should initially be 0 (before preparing any + * RBs), should be 8 after preparing the first 8 RBs (for example), and must + * wrap back to 0 at the end of the circular buffer (but don't wrap before + * "read" idx has advanced past 1! See below). + * NOTE: 4965 EXPECTS THE WRITE IDX TO BE INCREMENTED IN MULTIPLES OF 8. + * + * As the 4965 fills RBs (referenced from contiguous RBDs within the circular + * buffer), it updates the Rx status buffer in host DRAM, 2) described above, + * to tell the driver the idx of the latest filled RBD. The driver must + * read this "read" idx from DRAM after receiving an Rx interrupt from 4965. + * + * The driver must also internally keep track of a third idx, which is the + * next RBD to process. When receiving an Rx interrupt, driver should process + * all filled but unprocessed RBs up to, but not including, the RB + * corresponding to the "read" idx. For example, if "read" idx becomes "1", + * driver may process the RB pointed to by RBD 0. Depending on volume of + * traffic, there may be many RBs to process. + * + * If read idx == write idx, 4965 thinks there is no room to put new data. + * Due to this, the maximum number of filled RBs is 255, instead of 256. To + * be safe, make sure that there is a gap of at least 2 RBDs between "write" + * and "read" idxes; that is, make sure that there are no more than 254 + * buffers waiting to be filled. + */ +#define FH49_MEM_RSCSR_LOWER_BOUND (FH49_MEM_LOWER_BOUND + 0xBC0) +#define FH49_MEM_RSCSR_UPPER_BOUND (FH49_MEM_LOWER_BOUND + 0xC00) +#define FH49_MEM_RSCSR_CHNL0 (FH49_MEM_RSCSR_LOWER_BOUND) + +/** + * Physical base address of 8-byte Rx Status buffer. + * Bit fields: + * 31-0: Rx status buffer physical base address [35:4], must 16-byte aligned. + */ +#define FH49_RSCSR_CHNL0_STTS_WPTR_REG (FH49_MEM_RSCSR_CHNL0) + +/** + * Physical base address of Rx Buffer Descriptor Circular Buffer. + * Bit fields: + * 27-0: RBD CD physical base address [35:8], must be 256-byte aligned. + */ +#define FH49_RSCSR_CHNL0_RBDCB_BASE_REG (FH49_MEM_RSCSR_CHNL0 + 0x004) + +/** + * Rx write pointer (idx, really!). + * Bit fields: + * 11-0: Index of driver's most recent prepared-to-be-filled RBD, + 1. + * NOTE: For 256-entry circular buffer, use only bits [7:0]. + */ +#define FH49_RSCSR_CHNL0_RBDCB_WPTR_REG (FH49_MEM_RSCSR_CHNL0 + 0x008) +#define FH49_RSCSR_CHNL0_WPTR (FH49_RSCSR_CHNL0_RBDCB_WPTR_REG) + +/** + * Rx Config/Status Registers (RCSR) + * Rx Config Reg for channel 0 (only channel used) + * + * Driver must initialize FH49_MEM_RCSR_CHNL0_CONFIG_REG as follows for + * normal operation (see bit fields). + * + * Clearing FH49_MEM_RCSR_CHNL0_CONFIG_REG to 0 turns off Rx DMA. + * Driver should poll FH49_MEM_RSSR_RX_STATUS_REG for + * FH49_RSSR_CHNL0_RX_STATUS_CHNL_IDLE (bit 24) before continuing. + * + * Bit fields: + * 31-30: Rx DMA channel enable: '00' off/pause, '01' pause at end of frame, + * '10' operate normally + * 29-24: reserved + * 23-20: # RBDs in circular buffer = 2^value; use "8" for 256 RBDs (normal), + * min "5" for 32 RBDs, max "12" for 4096 RBDs. + * 19-18: reserved + * 17-16: size of each receive buffer; '00' 4K (normal), '01' 8K, + * '10' 12K, '11' 16K. + * 15-14: reserved + * 13-12: IRQ destination; '00' none, '01' host driver (normal operation) + * 11- 4: timeout for closing Rx buffer and interrupting host (units 32 usec) + * typical value 0x10 (about 1/2 msec) + * 3- 0: reserved + */ +#define FH49_MEM_RCSR_LOWER_BOUND (FH49_MEM_LOWER_BOUND + 0xC00) +#define FH49_MEM_RCSR_UPPER_BOUND (FH49_MEM_LOWER_BOUND + 0xCC0) +#define FH49_MEM_RCSR_CHNL0 (FH49_MEM_RCSR_LOWER_BOUND) + +#define FH49_MEM_RCSR_CHNL0_CONFIG_REG (FH49_MEM_RCSR_CHNL0) + +#define FH49_RCSR_CHNL0_RX_CONFIG_RB_TIMEOUT_MSK (0x00000FF0) /* bits 4-11 */ +#define FH49_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_MSK (0x00001000) /* bits 12 */ +#define FH49_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MSK (0x00008000) /* bit 15 */ +#define FH49_RCSR_CHNL0_RX_CONFIG_RB_SIZE_MSK (0x00030000) /* bits 16-17 */ +#define FH49_RCSR_CHNL0_RX_CONFIG_RBDBC_SIZE_MSK (0x00F00000) /* bits 20-23 */ +#define FH49_RCSR_CHNL0_RX_CONFIG_DMA_CHNL_EN_MSK (0xC0000000) /* bits 30-31 */ + +#define FH49_RCSR_RX_CONFIG_RBDCB_SIZE_POS (20) +#define FH49_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS (4) +#define RX_RB_TIMEOUT (0x10) + +#define FH49_RCSR_RX_CONFIG_CHNL_EN_PAUSE_VAL (0x00000000) +#define FH49_RCSR_RX_CONFIG_CHNL_EN_PAUSE_EOF_VAL (0x40000000) +#define FH49_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL (0x80000000) + +#define FH49_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K (0x00000000) +#define FH49_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K (0x00010000) +#define FH49_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_12K (0x00020000) +#define FH49_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_16K (0x00030000) + +#define FH49_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY (0x00000004) +#define FH49_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_NO_INT_VAL (0x00000000) +#define FH49_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL (0x00001000) + +/** + * Rx Shared Status Registers (RSSR) + * + * After stopping Rx DMA channel (writing 0 to + * FH49_MEM_RCSR_CHNL0_CONFIG_REG), driver must poll + * FH49_MEM_RSSR_RX_STATUS_REG until Rx channel is idle. + * + * Bit fields: + * 24: 1 = Channel 0 is idle + * + * FH49_MEM_RSSR_SHARED_CTRL_REG and FH49_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV + * contain default values that should not be altered by the driver. + */ +#define FH49_MEM_RSSR_LOWER_BOUND (FH49_MEM_LOWER_BOUND + 0xC40) +#define FH49_MEM_RSSR_UPPER_BOUND (FH49_MEM_LOWER_BOUND + 0xD00) + +#define FH49_MEM_RSSR_SHARED_CTRL_REG (FH49_MEM_RSSR_LOWER_BOUND) +#define FH49_MEM_RSSR_RX_STATUS_REG (FH49_MEM_RSSR_LOWER_BOUND + 0x004) +#define FH49_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV\ + (FH49_MEM_RSSR_LOWER_BOUND + 0x008) + +#define FH49_RSSR_CHNL0_RX_STATUS_CHNL_IDLE (0x01000000) + +#define FH49_MEM_TFDIB_REG1_ADDR_BITSHIFT 28 + +/* TFDB Area - TFDs buffer table */ +#define FH49_MEM_TFDIB_DRAM_ADDR_LSB_MSK (0xFFFFFFFF) +#define FH49_TFDIB_LOWER_BOUND (FH49_MEM_LOWER_BOUND + 0x900) +#define FH49_TFDIB_UPPER_BOUND (FH49_MEM_LOWER_BOUND + 0x958) +#define FH49_TFDIB_CTRL0_REG(_chnl) (FH49_TFDIB_LOWER_BOUND + 0x8 * (_chnl)) +#define FH49_TFDIB_CTRL1_REG(_chnl) (FH49_TFDIB_LOWER_BOUND + 0x8 * (_chnl) + 0x4) + +/** + * Transmit DMA Channel Control/Status Registers (TCSR) + * + * 4965 has one configuration register for each of 8 Tx DMA/FIFO channels + * supported in hardware (don't confuse these with the 16 Tx queues in DRAM, + * which feed the DMA/FIFO channels); config regs are separated by 0x20 bytes. + * + * To use a Tx DMA channel, driver must initialize its + * FH49_TCSR_CHNL_TX_CONFIG_REG(chnl) with: + * + * FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE | + * FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL + * + * All other bits should be 0. + * + * Bit fields: + * 31-30: Tx DMA channel enable: '00' off/pause, '01' pause at end of frame, + * '10' operate normally + * 29- 4: Reserved, set to "0" + * 3: Enable internal DMA requests (1, normal operation), disable (0) + * 2- 0: Reserved, set to "0" + */ +#define FH49_TCSR_LOWER_BOUND (FH49_MEM_LOWER_BOUND + 0xD00) +#define FH49_TCSR_UPPER_BOUND (FH49_MEM_LOWER_BOUND + 0xE60) + +/* Find Control/Status reg for given Tx DMA/FIFO channel */ +#define FH49_TCSR_CHNL_NUM (7) +#define FH50_TCSR_CHNL_NUM (8) + +/* TCSR: tx_config register values */ +#define FH49_TCSR_CHNL_TX_CONFIG_REG(_chnl) \ + (FH49_TCSR_LOWER_BOUND + 0x20 * (_chnl)) +#define FH49_TCSR_CHNL_TX_CREDIT_REG(_chnl) \ + (FH49_TCSR_LOWER_BOUND + 0x20 * (_chnl) + 0x4) +#define FH49_TCSR_CHNL_TX_BUF_STS_REG(_chnl) \ + (FH49_TCSR_LOWER_BOUND + 0x20 * (_chnl) + 0x8) + +#define FH49_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_TXF (0x00000000) +#define FH49_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_DRV (0x00000001) + +#define FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_DISABLE (0x00000000) +#define FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE (0x00000008) + +#define FH49_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_NOINT (0x00000000) +#define FH49_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_ENDTFD (0x00100000) +#define FH49_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_IFTFD (0x00200000) + +#define FH49_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_NOINT (0x00000000) +#define FH49_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_ENDTFD (0x00400000) +#define FH49_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_IFTFD (0x00800000) + +#define FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_PAUSE (0x00000000) +#define FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_PAUSE_EOF (0x40000000) +#define FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE (0x80000000) + +#define FH49_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_EMPTY (0x00000000) +#define FH49_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_WAIT (0x00002000) +#define FH49_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_VALID (0x00000003) + +#define FH49_TCSR_CHNL_TX_BUF_STS_REG_POS_TB_NUM (20) +#define FH49_TCSR_CHNL_TX_BUF_STS_REG_POS_TB_IDX (12) + +/** + * Tx Shared Status Registers (TSSR) + * + * After stopping Tx DMA channel (writing 0 to + * FH49_TCSR_CHNL_TX_CONFIG_REG(chnl)), driver must poll + * FH49_TSSR_TX_STATUS_REG until selected Tx channel is idle + * (channel's buffers empty | no pending requests). + * + * Bit fields: + * 31-24: 1 = Channel buffers empty (channel 7:0) + * 23-16: 1 = No pending requests (channel 7:0) + */ +#define FH49_TSSR_LOWER_BOUND (FH49_MEM_LOWER_BOUND + 0xEA0) +#define FH49_TSSR_UPPER_BOUND (FH49_MEM_LOWER_BOUND + 0xEC0) + +#define FH49_TSSR_TX_STATUS_REG (FH49_TSSR_LOWER_BOUND + 0x010) + +/** + * Bit fields for TSSR(Tx Shared Status & Control) error status register: + * 31: Indicates an address error when accessed to internal memory + * uCode/driver must write "1" in order to clear this flag + * 30: Indicates that Host did not send the expected number of dwords to FH + * uCode/driver must write "1" in order to clear this flag + * 16-9:Each status bit is for one channel. Indicates that an (Error) ActDMA + * command was received from the scheduler while the TRB was already full + * with previous command + * uCode/driver must write "1" in order to clear this flag + * 7-0: Each status bit indicates a channel's TxCredit error. When an error + * bit is set, it indicates that the FH has received a full indication + * from the RTC TxFIFO and the current value of the TxCredit counter was + * not equal to zero. This mean that the credit mechanism was not + * synchronized to the TxFIFO status + * uCode/driver must write "1" in order to clear this flag + */ +#define FH49_TSSR_TX_ERROR_REG (FH49_TSSR_LOWER_BOUND + 0x018) + +#define FH49_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(_chnl) ((1 << (_chnl)) << 16) + +/* Tx service channels */ +#define FH49_SRVC_CHNL (9) +#define FH49_SRVC_LOWER_BOUND (FH49_MEM_LOWER_BOUND + 0x9C8) +#define FH49_SRVC_UPPER_BOUND (FH49_MEM_LOWER_BOUND + 0x9D0) +#define FH49_SRVC_CHNL_SRAM_ADDR_REG(_chnl) \ + (FH49_SRVC_LOWER_BOUND + ((_chnl) - 9) * 0x4) + +#define FH49_TX_CHICKEN_BITS_REG (FH49_MEM_LOWER_BOUND + 0xE98) +/* Instruct FH to increment the retry count of a packet when + * it is brought from the memory to TX-FIFO + */ +#define FH49_TX_CHICKEN_BITS_SCD_AUTO_RETRY_EN (0x00000002) + +/* Keep Warm Size */ +#define IL_KW_SIZE 0x1000 /* 4k */ + +#endif /* __il_4965_h__ */ -- cgit v1.2.3