From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- .../net/wireless/intel/iwlwifi/fw/api/nvm-reg.h | 611 +++++++++++++++++++++ 1 file changed, 611 insertions(+) create mode 100644 drivers/net/wireless/intel/iwlwifi/fw/api/nvm-reg.h (limited to 'drivers/net/wireless/intel/iwlwifi/fw/api/nvm-reg.h') diff --git a/drivers/net/wireless/intel/iwlwifi/fw/api/nvm-reg.h b/drivers/net/wireless/intel/iwlwifi/fw/api/nvm-reg.h new file mode 100644 index 0000000000..28bfabb399 --- /dev/null +++ b/drivers/net/wireless/intel/iwlwifi/fw/api/nvm-reg.h @@ -0,0 +1,611 @@ +/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ +/* + * Copyright (C) 2012-2014, 2018-2022 Intel Corporation + * Copyright (C) 2013-2015 Intel Mobile Communications GmbH + * Copyright (C) 2016-2017 Intel Deutschland GmbH + */ +#ifndef __iwl_fw_api_nvm_reg_h__ +#define __iwl_fw_api_nvm_reg_h__ + +/** + * enum iwl_regulatory_and_nvm_subcmd_ids - regulatory/NVM commands + */ +enum iwl_regulatory_and_nvm_subcmd_ids { + /** + * @NVM_ACCESS_COMPLETE: &struct iwl_nvm_access_complete_cmd + */ + NVM_ACCESS_COMPLETE = 0x0, + + /** + * @LARI_CONFIG_CHANGE: &struct iwl_lari_config_change_cmd_v1, + * &struct iwl_lari_config_change_cmd_v2, + * &struct iwl_lari_config_change_cmd_v3, + * &struct iwl_lari_config_change_cmd_v4, + * &struct iwl_lari_config_change_cmd_v5 or + * &struct iwl_lari_config_change_cmd_v6 + */ + LARI_CONFIG_CHANGE = 0x1, + + /** + * @NVM_GET_INFO: + * Command is &struct iwl_nvm_get_info, + * response is &struct iwl_nvm_get_info_rsp + */ + NVM_GET_INFO = 0x2, + + /** + * @TAS_CONFIG: &union iwl_tas_config_cmd + */ + TAS_CONFIG = 0x3, + + /** + * @SAR_OFFSET_MAPPING_TABLE_CMD: &struct iwl_sar_offset_mapping_cmd + */ + SAR_OFFSET_MAPPING_TABLE_CMD = 0x4, + + /** + * @PNVM_INIT_COMPLETE_NTFY: &struct iwl_pnvm_init_complete_ntfy + */ + PNVM_INIT_COMPLETE_NTFY = 0xFE, +}; + +/** + * enum iwl_nvm_access_op - NVM access opcode + * @IWL_NVM_READ: read NVM + * @IWL_NVM_WRITE: write NVM + */ +enum iwl_nvm_access_op { + IWL_NVM_READ = 0, + IWL_NVM_WRITE = 1, +}; + +/** + * enum iwl_nvm_access_target - target of the NVM_ACCESS_CMD + * @NVM_ACCESS_TARGET_CACHE: access the cache + * @NVM_ACCESS_TARGET_OTP: access the OTP + * @NVM_ACCESS_TARGET_EEPROM: access the EEPROM + */ +enum iwl_nvm_access_target { + NVM_ACCESS_TARGET_CACHE = 0, + NVM_ACCESS_TARGET_OTP = 1, + NVM_ACCESS_TARGET_EEPROM = 2, +}; + +/** + * enum iwl_nvm_section_type - section types for NVM_ACCESS_CMD + * @NVM_SECTION_TYPE_SW: software section + * @NVM_SECTION_TYPE_REGULATORY: regulatory section + * @NVM_SECTION_TYPE_CALIBRATION: calibration section + * @NVM_SECTION_TYPE_PRODUCTION: production section + * @NVM_SECTION_TYPE_REGULATORY_SDP: regulatory section used by 3168 series + * @NVM_SECTION_TYPE_MAC_OVERRIDE: MAC override section + * @NVM_SECTION_TYPE_PHY_SKU: PHY SKU section + * @NVM_MAX_NUM_SECTIONS: number of sections + */ +enum iwl_nvm_section_type { + NVM_SECTION_TYPE_SW = 1, + NVM_SECTION_TYPE_REGULATORY = 3, + NVM_SECTION_TYPE_CALIBRATION = 4, + NVM_SECTION_TYPE_PRODUCTION = 5, + NVM_SECTION_TYPE_REGULATORY_SDP = 8, + NVM_SECTION_TYPE_MAC_OVERRIDE = 11, + NVM_SECTION_TYPE_PHY_SKU = 12, + NVM_MAX_NUM_SECTIONS = 13, +}; + +/** + * struct iwl_nvm_access_cmd - Request the device to send an NVM section + * @op_code: &enum iwl_nvm_access_op + * @target: &enum iwl_nvm_access_target + * @type: &enum iwl_nvm_section_type + * @offset: offset in bytes into the section + * @length: in bytes, to read/write + * @data: if write operation, the data to write. On read its empty + */ +struct iwl_nvm_access_cmd { + u8 op_code; + u8 target; + __le16 type; + __le16 offset; + __le16 length; + u8 data[]; +} __packed; /* NVM_ACCESS_CMD_API_S_VER_2 */ + +/** + * struct iwl_nvm_access_resp_ver2 - response to NVM_ACCESS_CMD + * @offset: offset in bytes into the section + * @length: in bytes, either how much was written or read + * @type: NVM_SECTION_TYPE_* + * @status: 0 for success, fail otherwise + * @data: if read operation, the data returned. Empty on write. + */ +struct iwl_nvm_access_resp { + __le16 offset; + __le16 length; + __le16 type; + __le16 status; + u8 data[]; +} __packed; /* NVM_ACCESS_CMD_RESP_API_S_VER_2 */ + +/* + * struct iwl_nvm_get_info - request to get NVM data + */ +struct iwl_nvm_get_info { + __le32 reserved; +} __packed; /* REGULATORY_NVM_GET_INFO_CMD_API_S_VER_1 */ + +/** + * enum iwl_nvm_info_general_flags - flags in NVM_GET_INFO resp + * @NVM_GENERAL_FLAGS_EMPTY_OTP: 1 if OTP is empty + */ +enum iwl_nvm_info_general_flags { + NVM_GENERAL_FLAGS_EMPTY_OTP = BIT(0), +}; + +/** + * struct iwl_nvm_get_info_general - general NVM data + * @flags: bit 0: 1 - empty, 0 - non-empty + * @nvm_version: nvm version + * @board_type: board type + * @n_hw_addrs: number of reserved MAC addresses + */ +struct iwl_nvm_get_info_general { + __le32 flags; + __le16 nvm_version; + u8 board_type; + u8 n_hw_addrs; +} __packed; /* REGULATORY_NVM_GET_INFO_GENERAL_S_VER_2 */ + +/** + * enum iwl_nvm_mac_sku_flags - flags in &iwl_nvm_get_info_sku + * @NVM_MAC_SKU_FLAGS_BAND_2_4_ENABLED: true if 2.4 band enabled + * @NVM_MAC_SKU_FLAGS_BAND_5_2_ENABLED: true if 5.2 band enabled + * @NVM_MAC_SKU_FLAGS_802_11N_ENABLED: true if 11n enabled + * @NVM_MAC_SKU_FLAGS_802_11AC_ENABLED: true if 11ac enabled + * @NVM_MAC_SKU_FLAGS_MIMO_DISABLED: true if MIMO disabled + * @NVM_MAC_SKU_FLAGS_WAPI_ENABLED: true if WAPI enabled + * @NVM_MAC_SKU_FLAGS_REG_CHECK_ENABLED: true if regulatory checker enabled + * @NVM_MAC_SKU_FLAGS_API_LOCK_ENABLED: true if API lock enabled + */ +enum iwl_nvm_mac_sku_flags { + NVM_MAC_SKU_FLAGS_BAND_2_4_ENABLED = BIT(0), + NVM_MAC_SKU_FLAGS_BAND_5_2_ENABLED = BIT(1), + NVM_MAC_SKU_FLAGS_802_11N_ENABLED = BIT(2), + NVM_MAC_SKU_FLAGS_802_11AC_ENABLED = BIT(3), + /** + * @NVM_MAC_SKU_FLAGS_802_11AX_ENABLED: true if 11ax enabled + */ + NVM_MAC_SKU_FLAGS_802_11AX_ENABLED = BIT(4), + NVM_MAC_SKU_FLAGS_MIMO_DISABLED = BIT(5), + NVM_MAC_SKU_FLAGS_WAPI_ENABLED = BIT(8), + NVM_MAC_SKU_FLAGS_REG_CHECK_ENABLED = BIT(14), + NVM_MAC_SKU_FLAGS_API_LOCK_ENABLED = BIT(15), +}; + +/** + * struct iwl_nvm_get_info_sku - mac information + * @mac_sku_flags: flags for SKU, see &enum iwl_nvm_mac_sku_flags + */ +struct iwl_nvm_get_info_sku { + __le32 mac_sku_flags; +} __packed; /* REGULATORY_NVM_GET_INFO_MAC_SKU_SECTION_S_VER_2 */ + +/** + * struct iwl_nvm_get_info_phy - phy information + * @tx_chains: BIT 0 chain A, BIT 1 chain B + * @rx_chains: BIT 0 chain A, BIT 1 chain B + */ +struct iwl_nvm_get_info_phy { + __le32 tx_chains; + __le32 rx_chains; +} __packed; /* REGULATORY_NVM_GET_INFO_PHY_SKU_SECTION_S_VER_1 */ + +#define IWL_NUM_CHANNELS_V1 51 +#define IWL_NUM_CHANNELS 110 + +/** + * struct iwl_nvm_get_info_regulatory - regulatory information + * @lar_enabled: is LAR enabled + * @channel_profile: regulatory data of this channel + * @reserved: reserved + */ +struct iwl_nvm_get_info_regulatory_v1 { + __le32 lar_enabled; + __le16 channel_profile[IWL_NUM_CHANNELS_V1]; + __le16 reserved; +} __packed; /* REGULATORY_NVM_GET_INFO_REGULATORY_S_VER_1 */ + +/** + * struct iwl_nvm_get_info_regulatory - regulatory information + * @lar_enabled: is LAR enabled + * @n_channels: number of valid channels in the array + * @channel_profile: regulatory data of this channel + */ +struct iwl_nvm_get_info_regulatory { + __le32 lar_enabled; + __le32 n_channels; + __le32 channel_profile[IWL_NUM_CHANNELS]; +} __packed; /* REGULATORY_NVM_GET_INFO_REGULATORY_S_VER_2 */ + +/** + * struct iwl_nvm_get_info_rsp_v3 - response to get NVM data + * @general: general NVM data + * @mac_sku: data relating to MAC sku + * @phy_sku: data relating to PHY sku + * @regulatory: regulatory data + */ +struct iwl_nvm_get_info_rsp_v3 { + struct iwl_nvm_get_info_general general; + struct iwl_nvm_get_info_sku mac_sku; + struct iwl_nvm_get_info_phy phy_sku; + struct iwl_nvm_get_info_regulatory_v1 regulatory; +} __packed; /* REGULATORY_NVM_GET_INFO_RSP_API_S_VER_3 */ + +/** + * struct iwl_nvm_get_info_rsp - response to get NVM data + * @general: general NVM data + * @mac_sku: data relating to MAC sku + * @phy_sku: data relating to PHY sku + * @regulatory: regulatory data + */ +struct iwl_nvm_get_info_rsp { + struct iwl_nvm_get_info_general general; + struct iwl_nvm_get_info_sku mac_sku; + struct iwl_nvm_get_info_phy phy_sku; + struct iwl_nvm_get_info_regulatory regulatory; +} __packed; /* REGULATORY_NVM_GET_INFO_RSP_API_S_VER_4 */ + +/** + * struct iwl_nvm_access_complete_cmd - NVM_ACCESS commands are completed + * @reserved: reserved + */ +struct iwl_nvm_access_complete_cmd { + __le32 reserved; +} __packed; /* NVM_ACCESS_COMPLETE_CMD_API_S_VER_1 */ + +/** + * struct iwl_mcc_update_cmd - Request the device to update geographic + * regulatory profile according to the given MCC (Mobile Country Code). + * The MCC is two letter-code, ascii upper case[A-Z] or '00' for world domain. + * 'ZZ' MCC will be used to switch to NVM default profile; in this case, the + * MCC in the cmd response will be the relevant MCC in the NVM. + * @mcc: given mobile country code + * @source_id: the source from where we got the MCC, see iwl_mcc_source + * @reserved: reserved for alignment + * @key: integrity key for MCC API OEM testing + * @reserved2: reserved + */ +struct iwl_mcc_update_cmd { + __le16 mcc; + u8 source_id; + u8 reserved; + __le32 key; + u8 reserved2[20]; +} __packed; /* LAR_UPDATE_MCC_CMD_API_S_VER_2 */ + +/** + * enum iwl_geo_information - geographic information. + * @GEO_NO_INFO: no special info for this geo profile. + * @GEO_WMM_ETSI_5GHZ_INFO: this geo profile limits the WMM params + * for the 5 GHz band. + */ +enum iwl_geo_information { + GEO_NO_INFO = 0, + GEO_WMM_ETSI_5GHZ_INFO = BIT(0), +}; + +/** + * struct iwl_mcc_update_resp_v3 - response to MCC_UPDATE_CMD. + * Contains the new channel control profile map, if changed, and the new MCC + * (mobile country code). + * The new MCC may be different than what was requested in MCC_UPDATE_CMD. + * @status: see &enum iwl_mcc_update_status + * @mcc: the new applied MCC + * @cap: capabilities for all channels which matches the MCC + * @source_id: the MCC source, see iwl_mcc_source + * @time: time elapsed from the MCC test start (in units of 30 seconds) + * @geo_info: geographic specific profile information + * see &enum iwl_geo_information. + * @n_channels: number of channels in @channels_data. + * @channels: channel control data map, DWORD for each channel. Only the first + * 16bits are used. + */ +struct iwl_mcc_update_resp_v3 { + __le32 status; + __le16 mcc; + u8 cap; + u8 source_id; + __le16 time; + __le16 geo_info; + __le32 n_channels; + __le32 channels[]; +} __packed; /* LAR_UPDATE_MCC_CMD_RESP_S_VER_3 */ + +/** + * struct iwl_mcc_update_resp_v4 - response to MCC_UPDATE_CMD. + * Contains the new channel control profile map, if changed, and the new MCC + * (mobile country code). + * The new MCC may be different than what was requested in MCC_UPDATE_CMD. + * @status: see &enum iwl_mcc_update_status + * @mcc: the new applied MCC + * @cap: capabilities for all channels which matches the MCC + * @time: time elapsed from the MCC test start (in units of 30 seconds) + * @geo_info: geographic specific profile information + * see &enum iwl_geo_information. + * @source_id: the MCC source, see iwl_mcc_source + * @reserved: for four bytes alignment. + * @n_channels: number of channels in @channels_data. + * @channels: channel control data map, DWORD for each channel. Only the first + * 16bits are used. + */ +struct iwl_mcc_update_resp_v4 { + __le32 status; + __le16 mcc; + __le16 cap; + __le16 time; + __le16 geo_info; + u8 source_id; + u8 reserved[3]; + __le32 n_channels; + __le32 channels[]; +} __packed; /* LAR_UPDATE_MCC_CMD_RESP_S_VER_4 */ + +/** + * struct iwl_mcc_update_resp_v8 - response to MCC_UPDATE_CMD. + * Contains the new channel control profile map, if changed, and the new MCC + * (mobile country code). + * The new MCC may be different than what was requested in MCC_UPDATE_CMD. + * @status: see &enum iwl_mcc_update_status + * @mcc: the new applied MCC + * @padding: padding for 2 bytes. + * @cap: capabilities for all channels which matches the MCC + * @time: time elapsed from the MCC test start (in units of 30 seconds) + * @geo_info: geographic specific profile information + * see &enum iwl_geo_information. + * @source_id: the MCC source, see iwl_mcc_source + * @reserved: for four bytes alignment. + * @n_channels: number of channels in @channels_data. + * @channels: channel control data map, DWORD for each channel. Only the first + * 16bits are used. + */ +struct iwl_mcc_update_resp_v8 { + __le32 status; + __le16 mcc; + u8 padding[2]; + __le32 cap; + __le16 time; + __le16 geo_info; + u8 source_id; + u8 reserved[3]; + __le32 n_channels; + __le32 channels[]; +} __packed; /* LAR_UPDATE_MCC_CMD_RESP_S_VER_8 */ + +/** + * struct iwl_mcc_chub_notif - chub notifies of mcc change + * (MCC_CHUB_UPDATE_CMD = 0xc9) + * The Chub (Communication Hub, CommsHUB) is a HW component that connects to + * the cellular and connectivity cores that gets updates of the mcc, and + * notifies the ucode directly of any mcc change. + * The ucode requests the driver to request the device to update geographic + * regulatory profile according to the given MCC (Mobile Country Code). + * The MCC is two letter-code, ascii upper case[A-Z] or '00' for world domain. + * 'ZZ' MCC will be used to switch to NVM default profile; in this case, the + * MCC in the cmd response will be the relevant MCC in the NVM. + * @mcc: given mobile country code + * @source_id: identity of the change originator, see iwl_mcc_source + * @reserved1: reserved for alignment + */ +struct iwl_mcc_chub_notif { + __le16 mcc; + u8 source_id; + u8 reserved1; +} __packed; /* LAR_MCC_NOTIFY_S */ + +enum iwl_mcc_update_status { + MCC_RESP_NEW_CHAN_PROFILE, + MCC_RESP_SAME_CHAN_PROFILE, + MCC_RESP_INVALID, + MCC_RESP_NVM_DISABLED, + MCC_RESP_ILLEGAL, + MCC_RESP_LOW_PRIORITY, + MCC_RESP_TEST_MODE_ACTIVE, + MCC_RESP_TEST_MODE_NOT_ACTIVE, + MCC_RESP_TEST_MODE_DENIAL_OF_SERVICE, +}; + +enum iwl_mcc_source { + MCC_SOURCE_OLD_FW = 0, + MCC_SOURCE_ME = 1, + MCC_SOURCE_BIOS = 2, + MCC_SOURCE_3G_LTE_HOST = 3, + MCC_SOURCE_3G_LTE_DEVICE = 4, + MCC_SOURCE_WIFI = 5, + MCC_SOURCE_RESERVED = 6, + MCC_SOURCE_DEFAULT = 7, + MCC_SOURCE_UNINITIALIZED = 8, + MCC_SOURCE_MCC_API = 9, + MCC_SOURCE_GET_CURRENT = 0x10, + MCC_SOURCE_GETTING_MCC_TEST_MODE = 0x11, +}; + +#define IWL_TAS_BLOCK_LIST_MAX 16 +/** + * struct iwl_tas_config_cmd_v2 - configures the TAS + * @block_list_size: size of relevant field in block_list_array + * @block_list_array: list of countries where TAS must be disabled + */ +struct iwl_tas_config_cmd_v2 { + __le32 block_list_size; + __le32 block_list_array[IWL_TAS_BLOCK_LIST_MAX]; +} __packed; /* TAS_CONFIG_CMD_API_S_VER_2 */ + +/** + * struct iwl_tas_config_cmd_v3 - configures the TAS + * @block_list_size: size of relevant field in block_list_array + * @block_list_array: list of countries where TAS must be disabled + * @override_tas_iec: indicates whether to override default value of IEC regulatory + * @enable_tas_iec: in case override_tas_iec is set - + * indicates whether IEC regulatory is enabled or disabled + */ +struct iwl_tas_config_cmd_v3 { + __le32 block_list_size; + __le32 block_list_array[IWL_TAS_BLOCK_LIST_MAX]; + __le16 override_tas_iec; + __le16 enable_tas_iec; +} __packed; /* TAS_CONFIG_CMD_API_S_VER_3 */ + +/** + * struct iwl_tas_config_cmd_v3 - configures the TAS + * @block_list_size: size of relevant field in block_list_array + * @block_list_array: list of countries where TAS must be disabled + * @override_tas_iec: indicates whether to override default value of IEC regulatory + * @enable_tas_iec: in case override_tas_iec is set - + * indicates whether IEC regulatory is enabled or disabled + * @usa_tas_uhb_allowed: if set, allow TAS UHB in the USA + * @reserved: reserved +*/ +struct iwl_tas_config_cmd_v4 { + __le32 block_list_size; + __le32 block_list_array[IWL_TAS_BLOCK_LIST_MAX]; + u8 override_tas_iec; + u8 enable_tas_iec; + u8 usa_tas_uhb_allowed; + u8 reserved; +} __packed; /* TAS_CONFIG_CMD_API_S_VER_4 */ + +union iwl_tas_config_cmd { + struct iwl_tas_config_cmd_v2 v2; + struct iwl_tas_config_cmd_v3 v3; + struct iwl_tas_config_cmd_v4 v4; +}; +/** + * enum iwl_lari_configs - bit masks for the various LARI config operations + * @LARI_CONFIG_DISABLE_11AC_UKRAINE_MSK: disable 11ac in ukraine + * @LARI_CONFIG_CHANGE_ETSI_TO_PASSIVE_MSK: ETSI 5.8GHz SRD passive scan + * @LARI_CONFIG_CHANGE_ETSI_TO_DISABLED_MSK: ETSI 5.8GHz SRD disabled + * @LARI_CONFIG_ENABLE_5G2_IN_INDONESIA_MSK: enable 5.15/5.35GHz bands in + * Indonesia + */ +enum iwl_lari_config_masks { + LARI_CONFIG_DISABLE_11AC_UKRAINE_MSK = BIT(0), + LARI_CONFIG_CHANGE_ETSI_TO_PASSIVE_MSK = BIT(1), + LARI_CONFIG_CHANGE_ETSI_TO_DISABLED_MSK = BIT(2), + LARI_CONFIG_ENABLE_5G2_IN_INDONESIA_MSK = BIT(3), +}; + +#define IWL_11AX_UKRAINE_MASK 3 +#define IWL_11AX_UKRAINE_SHIFT 8 + +/** + * struct iwl_lari_config_change_cmd_v1 - change LARI configuration + * @config_bitmap: bit map of the config commands. each bit will trigger a + * different predefined FW config operation + */ +struct iwl_lari_config_change_cmd_v1 { + __le32 config_bitmap; +} __packed; /* LARI_CHANGE_CONF_CMD_S_VER_1 */ + +/** + * struct iwl_lari_config_change_cmd_v2 - change LARI configuration + * @config_bitmap: bit map of the config commands. each bit will trigger a + * different predefined FW config operation + * @oem_uhb_allow_bitmap: bitmap of UHB enabled MCC sets + */ +struct iwl_lari_config_change_cmd_v2 { + __le32 config_bitmap; + __le32 oem_uhb_allow_bitmap; +} __packed; /* LARI_CHANGE_CONF_CMD_S_VER_2 */ + +/** + * struct iwl_lari_config_change_cmd_v3 - change LARI configuration + * @config_bitmap: bit map of the config commands. each bit will trigger a + * different predefined FW config operation + * @oem_uhb_allow_bitmap: bitmap of UHB enabled MCC sets + * @oem_11ax_allow_bitmap: bitmap of 11ax allowed MCCs. + * For each supported country, a pair of regulatory override bit and 11ax mode exist + * in the bit field. + */ +struct iwl_lari_config_change_cmd_v3 { + __le32 config_bitmap; + __le32 oem_uhb_allow_bitmap; + __le32 oem_11ax_allow_bitmap; +} __packed; /* LARI_CHANGE_CONF_CMD_S_VER_3 */ + +/** + * struct iwl_lari_config_change_cmd_v4 - change LARI configuration + * @config_bitmap: Bitmap of the config commands. Each bit will trigger a + * different predefined FW config operation. + * @oem_uhb_allow_bitmap: Bitmap of UHB enabled MCC sets. + * @oem_11ax_allow_bitmap: Bitmap of 11ax allowed MCCs. There are two bits + * per country, one to indicate whether to override and the other to + * indicate the value to use. + * @oem_unii4_allow_bitmap: Bitmap of unii4 allowed MCCs.There are two bits + * per country, one to indicate whether to override and the other to + * indicate allow/disallow unii4 channels. + */ +struct iwl_lari_config_change_cmd_v4 { + __le32 config_bitmap; + __le32 oem_uhb_allow_bitmap; + __le32 oem_11ax_allow_bitmap; + __le32 oem_unii4_allow_bitmap; +} __packed; /* LARI_CHANGE_CONF_CMD_S_VER_4 */ + +/** + * struct iwl_lari_config_change_cmd_v5 - change LARI configuration + * @config_bitmap: Bitmap of the config commands. Each bit will trigger a + * different predefined FW config operation. + * @oem_uhb_allow_bitmap: Bitmap of UHB enabled MCC sets. + * @oem_11ax_allow_bitmap: Bitmap of 11ax allowed MCCs. There are two bits + * per country, one to indicate whether to override and the other to + * indicate the value to use. + * @oem_unii4_allow_bitmap: Bitmap of unii4 allowed MCCs.There are two bits + * per country, one to indicate whether to override and the other to + * indicate allow/disallow unii4 channels. + * @chan_state_active_bitmap: Bitmap for overriding channel state to active. + * Each bit represents a country or region to activate, according to the BIOS + * definitions. + */ +struct iwl_lari_config_change_cmd_v5 { + __le32 config_bitmap; + __le32 oem_uhb_allow_bitmap; + __le32 oem_11ax_allow_bitmap; + __le32 oem_unii4_allow_bitmap; + __le32 chan_state_active_bitmap; +} __packed; /* LARI_CHANGE_CONF_CMD_S_VER_5 */ + +/** + * struct iwl_lari_config_change_cmd_v6 - change LARI configuration + * @config_bitmap: Bitmap of the config commands. Each bit will trigger a + * different predefined FW config operation. + * @oem_uhb_allow_bitmap: Bitmap of UHB enabled MCC sets. + * @oem_11ax_allow_bitmap: Bitmap of 11ax allowed MCCs. There are two bits + * per country, one to indicate whether to override and the other to + * indicate the value to use. + * @oem_unii4_allow_bitmap: Bitmap of unii4 allowed MCCs.There are two bits + * per country, one to indicate whether to override and the other to + * indicate allow/disallow unii4 channels. + * @chan_state_active_bitmap: Bitmap for overriding channel state to active. + * Each bit represents a country or region to activate, according to the BIOS + * definitions. + * @force_disable_channels_bitmap: Bitmap of disabled bands/channels. + * Each bit represents a set of channels in a specific band that should be disabled + */ +struct iwl_lari_config_change_cmd_v6 { + __le32 config_bitmap; + __le32 oem_uhb_allow_bitmap; + __le32 oem_11ax_allow_bitmap; + __le32 oem_unii4_allow_bitmap; + __le32 chan_state_active_bitmap; + __le32 force_disable_channels_bitmap; +} __packed; /* LARI_CHANGE_CONF_CMD_S_VER_6 */ + +/** + * struct iwl_pnvm_init_complete_ntfy - PNVM initialization complete + * @status: PNVM image loading status + */ +struct iwl_pnvm_init_complete_ntfy { + __le32 status; +} __packed; /* PNVM_INIT_COMPLETE_NTFY_S_VER_1 */ + +#endif /* __iwl_fw_api_nvm_reg_h__ */ -- cgit v1.2.3