From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- drivers/net/wireless/intel/iwlwifi/iwl-op-mode.h | 215 +++++++++++++++++++++++ 1 file changed, 215 insertions(+) create mode 100644 drivers/net/wireless/intel/iwlwifi/iwl-op-mode.h (limited to 'drivers/net/wireless/intel/iwlwifi/iwl-op-mode.h') diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-op-mode.h b/drivers/net/wireless/intel/iwlwifi/iwl-op-mode.h new file mode 100644 index 0000000000..af5f9b210f --- /dev/null +++ b/drivers/net/wireless/intel/iwlwifi/iwl-op-mode.h @@ -0,0 +1,215 @@ +/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ +/* + * Copyright (C) 2005-2014, 2018-2021 Intel Corporation + * Copyright (C) 2013-2014 Intel Mobile Communications GmbH + * Copyright (C) 2015 Intel Deutschland GmbH + */ +#ifndef __iwl_op_mode_h__ +#define __iwl_op_mode_h__ + +#include +#include +#include "iwl-dbg-tlv.h" + +struct iwl_op_mode; +struct iwl_trans; +struct sk_buff; +struct iwl_device_cmd; +struct iwl_rx_cmd_buffer; +struct iwl_fw; +struct iwl_cfg; + +/** + * DOC: Operational mode - what is it ? + * + * The operational mode (a.k.a. op_mode) is the layer that implements + * mac80211's handlers. It knows two APIs: mac80211's and the fw's. It uses + * the transport API to access the HW. The op_mode doesn't need to know how the + * underlying HW works, since the transport layer takes care of that. + * + * There can be several op_mode: i.e. different fw APIs will require two + * different op_modes. This is why the op_mode is virtualized. + */ + +/** + * DOC: Life cycle of the Operational mode + * + * The operational mode has a very simple life cycle. + * + * 1) The driver layer (iwl-drv.c) chooses the op_mode based on the + * capabilities advertised by the fw file (in TLV format). + * 2) The driver layer starts the op_mode (ops->start) + * 3) The op_mode registers mac80211 + * 4) The op_mode is governed by mac80211 + * 5) The driver layer stops the op_mode + */ + +/** + * struct iwl_op_mode_ops - op_mode specific operations + * + * The op_mode exports its ops so that external components can start it and + * interact with it. The driver layer typically calls the start and stop + * handlers, the transport layer calls the others. + * + * All the handlers MUST be implemented, except @rx_rss which can be left + * out *iff* the opmode will never run on hardware with multi-queue capability. + * + * @start: start the op_mode. The transport layer is already allocated. + * May sleep + * @stop: stop the op_mode. Must free all the memory allocated. + * May sleep + * @rx: Rx notification to the op_mode. rxb is the Rx buffer itself. Cmd is the + * HCMD this Rx responds to. Can't sleep. + * @rx_rss: data queue RX notification to the op_mode, for (data) notifications + * received on the RSS queue(s). The queue parameter indicates which of the + * RSS queues received this frame; it will always be non-zero. + * This method must not sleep. + * @async_cb: called when an ASYNC command with CMD_WANT_ASYNC_CALLBACK set + * completes. Must be atomic. + * @queue_full: notifies that a HW queue is full. + * Must be atomic and called with BH disabled. + * @queue_not_full: notifies that a HW queue is not full any more. + * Must be atomic and called with BH disabled. + * @hw_rf_kill:notifies of a change in the HW rf kill switch. True means that + * the radio is killed. Return %true if the device should be stopped by + * the transport immediately after the call. May sleep. + * @free_skb: allows the transport layer to free skbs that haven't been + * reclaimed by the op_mode. This can happen when the driver is freed and + * there are Tx packets pending in the transport layer. + * Must be atomic + * @nic_error: error notification. Must be atomic and must be called with BH + * disabled, unless the sync parameter is true. + * @cmd_queue_full: Called when the command queue gets full. Must be atomic and + * called with BH disabled. + * @nic_config: configure NIC, called before firmware is started. + * May sleep + * @wimax_active: invoked when WiMax becomes active. May sleep + * @time_point: called when transport layer wants to collect debug data + */ +struct iwl_op_mode_ops { + struct iwl_op_mode *(*start)(struct iwl_trans *trans, + const struct iwl_cfg *cfg, + const struct iwl_fw *fw, + struct dentry *dbgfs_dir); + void (*stop)(struct iwl_op_mode *op_mode); + void (*rx)(struct iwl_op_mode *op_mode, struct napi_struct *napi, + struct iwl_rx_cmd_buffer *rxb); + void (*rx_rss)(struct iwl_op_mode *op_mode, struct napi_struct *napi, + struct iwl_rx_cmd_buffer *rxb, unsigned int queue); + void (*async_cb)(struct iwl_op_mode *op_mode, + const struct iwl_device_cmd *cmd); + void (*queue_full)(struct iwl_op_mode *op_mode, int queue); + void (*queue_not_full)(struct iwl_op_mode *op_mode, int queue); + bool (*hw_rf_kill)(struct iwl_op_mode *op_mode, bool state); + void (*free_skb)(struct iwl_op_mode *op_mode, struct sk_buff *skb); + void (*nic_error)(struct iwl_op_mode *op_mode, bool sync); + void (*cmd_queue_full)(struct iwl_op_mode *op_mode); + void (*nic_config)(struct iwl_op_mode *op_mode); + void (*wimax_active)(struct iwl_op_mode *op_mode); + void (*time_point)(struct iwl_op_mode *op_mode, + enum iwl_fw_ini_time_point tp_id, + union iwl_dbg_tlv_tp_data *tp_data); +}; + +int iwl_opmode_register(const char *name, const struct iwl_op_mode_ops *ops); +void iwl_opmode_deregister(const char *name); + +/** + * struct iwl_op_mode - operational mode + * @ops: pointer to its own ops + * + * This holds an implementation of the mac80211 / fw API. + */ +struct iwl_op_mode { + const struct iwl_op_mode_ops *ops; + + char op_mode_specific[] __aligned(sizeof(void *)); +}; + +static inline void iwl_op_mode_stop(struct iwl_op_mode *op_mode) +{ + might_sleep(); + op_mode->ops->stop(op_mode); +} + +static inline void iwl_op_mode_rx(struct iwl_op_mode *op_mode, + struct napi_struct *napi, + struct iwl_rx_cmd_buffer *rxb) +{ + return op_mode->ops->rx(op_mode, napi, rxb); +} + +static inline void iwl_op_mode_rx_rss(struct iwl_op_mode *op_mode, + struct napi_struct *napi, + struct iwl_rx_cmd_buffer *rxb, + unsigned int queue) +{ + op_mode->ops->rx_rss(op_mode, napi, rxb, queue); +} + +static inline void iwl_op_mode_async_cb(struct iwl_op_mode *op_mode, + const struct iwl_device_cmd *cmd) +{ + if (op_mode->ops->async_cb) + op_mode->ops->async_cb(op_mode, cmd); +} + +static inline void iwl_op_mode_queue_full(struct iwl_op_mode *op_mode, + int queue) +{ + op_mode->ops->queue_full(op_mode, queue); +} + +static inline void iwl_op_mode_queue_not_full(struct iwl_op_mode *op_mode, + int queue) +{ + op_mode->ops->queue_not_full(op_mode, queue); +} + +static inline bool __must_check +iwl_op_mode_hw_rf_kill(struct iwl_op_mode *op_mode, bool state) +{ + might_sleep(); + return op_mode->ops->hw_rf_kill(op_mode, state); +} + +static inline void iwl_op_mode_free_skb(struct iwl_op_mode *op_mode, + struct sk_buff *skb) +{ + if (WARN_ON_ONCE(!op_mode)) + return; + op_mode->ops->free_skb(op_mode, skb); +} + +static inline void iwl_op_mode_nic_error(struct iwl_op_mode *op_mode, bool sync) +{ + op_mode->ops->nic_error(op_mode, sync); +} + +static inline void iwl_op_mode_cmd_queue_full(struct iwl_op_mode *op_mode) +{ + op_mode->ops->cmd_queue_full(op_mode); +} + +static inline void iwl_op_mode_nic_config(struct iwl_op_mode *op_mode) +{ + might_sleep(); + op_mode->ops->nic_config(op_mode); +} + +static inline void iwl_op_mode_wimax_active(struct iwl_op_mode *op_mode) +{ + might_sleep(); + op_mode->ops->wimax_active(op_mode); +} + +static inline void iwl_op_mode_time_point(struct iwl_op_mode *op_mode, + enum iwl_fw_ini_time_point tp_id, + union iwl_dbg_tlv_tp_data *tp_data) +{ + if (!op_mode || !op_mode->ops || !op_mode->ops->time_point) + return; + op_mode->ops->time_point(op_mode, tp_id, tp_data); +} + +#endif /* __iwl_op_mode_h__ */ -- cgit v1.2.3