From 85c675d0d09a45a135bddd15d7b385f8758c32fb Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 18 May 2024 19:35:05 +0200 Subject: Adding upstream version 6.7.7. Signed-off-by: Daniel Baumann --- drivers/opp/core.c | 236 +++++++++++++++++++++++------------------------------ 1 file changed, 102 insertions(+), 134 deletions(-) (limited to 'drivers/opp/core.c') diff --git a/drivers/opp/core.c b/drivers/opp/core.c index bceb27b1ba..f1e54a3a15 100644 --- a/drivers/opp/core.c +++ b/drivers/opp/core.c @@ -813,6 +813,36 @@ struct dev_pm_opp *dev_pm_opp_find_level_ceil(struct device *dev, } EXPORT_SYMBOL_GPL(dev_pm_opp_find_level_ceil); +/** + * dev_pm_opp_find_level_floor() - Search for a rounded floor level + * @dev: device for which we do this operation + * @level: Start level + * + * Search for the matching floor *available* OPP from a starting level + * for a device. + * + * Return: matching *opp and refreshes *level accordingly, else returns + * ERR_PTR in case of error and should be handled using IS_ERR. Error return + * values can be: + * EINVAL: for bad pointer + * ERANGE: no match found for search + * ENODEV: if device not found in list of registered devices + * + * The callers are required to call dev_pm_opp_put() for the returned OPP after + * use. + */ +struct dev_pm_opp *dev_pm_opp_find_level_floor(struct device *dev, + unsigned int *level) +{ + unsigned long temp = *level; + struct dev_pm_opp *opp; + + opp = _find_key_floor(dev, &temp, 0, true, _read_level, NULL); + *level = temp; + return opp; +} +EXPORT_SYMBOL_GPL(dev_pm_opp_find_level_floor); + /** * dev_pm_opp_find_bw_ceil() - Search for a rounded ceil bandwidth * @dev: device for which we do this operation @@ -1030,7 +1060,7 @@ static int _set_performance_state(struct device *dev, struct device *pd_dev, if (!pd_dev) return 0; - ret = dev_pm_genpd_set_performance_state(pd_dev, pstate); + ret = dev_pm_domain_set_performance_state(pd_dev, pstate); if (ret) { dev_err(dev, "Failed to set performance state of %s: %d (%d)\n", dev_name(pd_dev), pstate, ret); @@ -1051,32 +1081,28 @@ static int _opp_set_required_opps_genpd(struct device *dev, { struct device **genpd_virt_devs = opp_table->genpd_virt_devs ? opp_table->genpd_virt_devs : &dev; - int i, ret = 0; - - /* - * Acquire genpd_virt_dev_lock to make sure we don't use a genpd_dev - * after it is freed from another thread. - */ - mutex_lock(&opp_table->genpd_virt_dev_lock); + int index, target, delta, ret; /* Scaling up? Set required OPPs in normal order, else reverse */ if (!scaling_down) { - for (i = 0; i < opp_table->required_opp_count; i++) { - ret = _set_performance_state(dev, genpd_virt_devs[i], opp, i); - if (ret) - break; - } + index = 0; + target = opp_table->required_opp_count; + delta = 1; } else { - for (i = opp_table->required_opp_count - 1; i >= 0; i--) { - ret = _set_performance_state(dev, genpd_virt_devs[i], opp, i); - if (ret) - break; - } + index = opp_table->required_opp_count - 1; + target = -1; + delta = -1; } - mutex_unlock(&opp_table->genpd_virt_dev_lock); + while (index != target) { + ret = _set_performance_state(dev, genpd_virt_devs[index], opp, index); + if (ret) + return ret; - return ret; + index += delta; + } + + return 0; } /* This is only called for PM domain for now */ @@ -1107,6 +1133,28 @@ void _update_set_required_opps(struct opp_table *opp_table) opp_table->set_required_opps = _opp_set_required_opps_generic; } +static int _set_opp_level(struct device *dev, struct opp_table *opp_table, + struct dev_pm_opp *opp) +{ + unsigned int level = 0; + int ret = 0; + + if (opp) { + if (!opp->level) + return 0; + + level = opp->level; + } + + /* Request a new performance state through the device's PM domain. */ + ret = dev_pm_domain_set_performance_state(dev, level); + if (ret) + dev_err(dev, "Failed to set performance state %u (%d)\n", level, + ret); + + return ret; +} + static void _find_current_opp(struct device *dev, struct opp_table *opp_table) { struct dev_pm_opp *opp = ERR_PTR(-ENODEV); @@ -1154,8 +1202,13 @@ static int _disable_opp_table(struct device *dev, struct opp_table *opp_table) if (opp_table->regulators) regulator_disable(opp_table->regulators[0]); + ret = _set_opp_level(dev, opp_table, NULL); + if (ret) + goto out; + ret = _set_required_opps(dev, opp_table, NULL, false); +out: opp_table->enabled = false; return ret; } @@ -1198,6 +1251,10 @@ static int _set_opp(struct device *dev, struct opp_table *opp_table, return ret; } + ret = _set_opp_level(dev, opp_table, opp); + if (ret) + return ret; + ret = _set_opp_bw(opp_table, opp, dev); if (ret) { dev_err(dev, "Failed to set bw: %d\n", ret); @@ -1241,6 +1298,10 @@ static int _set_opp(struct device *dev, struct opp_table *opp_table, return ret; } + ret = _set_opp_level(dev, opp_table, opp); + if (ret) + return ret; + ret = _set_required_opps(dev, opp_table, opp, false); if (ret) { dev_err(dev, "Failed to set required opps: %d\n", ret); @@ -1410,7 +1471,6 @@ static struct opp_table *_allocate_opp_table(struct device *dev, int index) return ERR_PTR(-ENOMEM); mutex_init(&opp_table->lock); - mutex_init(&opp_table->genpd_virt_dev_lock); INIT_LIST_HEAD(&opp_table->dev_list); INIT_LIST_HEAD(&opp_table->lazy); @@ -1446,7 +1506,6 @@ static struct opp_table *_allocate_opp_table(struct device *dev, int index) remove_opp_dev: _of_clear_opp_table(opp_table); _remove_opp_dev(opp_dev, opp_table); - mutex_destroy(&opp_table->genpd_virt_dev_lock); mutex_destroy(&opp_table->lock); err: kfree(opp_table); @@ -1614,7 +1673,6 @@ static void _opp_table_kref_release(struct kref *kref) list_for_each_entry_safe(opp_dev, temp, &opp_table->dev_list, node) _remove_opp_dev(opp_dev, opp_table); - mutex_destroy(&opp_table->genpd_virt_dev_lock); mutex_destroy(&opp_table->lock); kfree(opp_table); } @@ -2002,8 +2060,7 @@ int _opp_add(struct device *dev, struct dev_pm_opp *new_opp, * _opp_add_v1() - Allocate a OPP based on v1 bindings. * @opp_table: OPP table * @dev: device for which we do this operation - * @freq: Frequency in Hz for this OPP - * @u_volt: Voltage in uVolts for this OPP + * @data: The OPP data for the OPP to add * @dynamic: Dynamically added OPPs. * * This function adds an opp definition to the opp table and returns status. @@ -2021,10 +2078,10 @@ int _opp_add(struct device *dev, struct dev_pm_opp *new_opp, * -ENOMEM Memory allocation failure */ int _opp_add_v1(struct opp_table *opp_table, struct device *dev, - unsigned long freq, long u_volt, bool dynamic) + struct dev_pm_opp_data *data, bool dynamic) { struct dev_pm_opp *new_opp; - unsigned long tol; + unsigned long tol, u_volt = data->u_volt; int ret; if (!assert_single_clk(opp_table)) @@ -2035,7 +2092,8 @@ int _opp_add_v1(struct opp_table *opp_table, struct device *dev, return -ENOMEM; /* populate the opp table */ - new_opp->rates[0] = freq; + new_opp->rates[0] = data->freq; + new_opp->level = data->level; tol = u_volt * opp_table->voltage_tolerance_v1 / 100; new_opp->supplies[0].u_volt = u_volt; new_opp->supplies[0].u_volt_min = u_volt - tol; @@ -2064,12 +2122,7 @@ free_opp: return ret; } -/** - * _opp_set_supported_hw() - Set supported platforms - * @dev: Device for which supported-hw has to be set. - * @versions: Array of hierarchy of versions to match. - * @count: Number of elements in the array. - * +/* * This is required only for the V2 bindings, and it enables a platform to * specify the hierarchy of versions it supports. OPP layer will then enable * OPPs, which are available for those versions, based on its 'opp-supported-hw' @@ -2092,14 +2145,6 @@ static int _opp_set_supported_hw(struct opp_table *opp_table, return 0; } -/** - * _opp_put_supported_hw() - Releases resources blocked for supported hw - * @opp_table: OPP table returned by _opp_set_supported_hw(). - * - * This is required only for the V2 bindings, and is called for a matching - * _opp_set_supported_hw(). Until this is called, the opp_table structure - * will not be freed. - */ static void _opp_put_supported_hw(struct opp_table *opp_table) { if (opp_table->supported_hw) { @@ -2109,11 +2154,7 @@ static void _opp_put_supported_hw(struct opp_table *opp_table) } } -/** - * _opp_set_prop_name() - Set prop-extn name - * @dev: Device for which the prop-name has to be set. - * @name: name to postfix to properties. - * +/* * This is required only for the V2 bindings, and it enables a platform to * specify the extn to be used for certain property names. The properties to * which the extension will apply are opp-microvolt and opp-microamp. OPP core @@ -2131,14 +2172,6 @@ static int _opp_set_prop_name(struct opp_table *opp_table, const char *name) return 0; } -/** - * _opp_put_prop_name() - Releases resources blocked for prop-name - * @opp_table: OPP table returned by _opp_set_prop_name(). - * - * This is required only for the V2 bindings, and is called for a matching - * _opp_set_prop_name(). Until this is called, the opp_table structure - * will not be freed. - */ static void _opp_put_prop_name(struct opp_table *opp_table) { if (opp_table->prop_name) { @@ -2147,12 +2180,7 @@ static void _opp_put_prop_name(struct opp_table *opp_table) } } -/** - * _opp_set_regulators() - Set regulator names for the device - * @dev: Device for which regulator name is being set. - * @names: Array of pointers to the names of the regulator. - * @count: Number of regulators. - * +/* * In order to support OPP switching, OPP layer needs to know the name of the * device's regulators, as the core would be required to switch voltages as * well. @@ -2214,10 +2242,6 @@ free_regulators: return ret; } -/** - * _opp_put_regulators() - Releases resources blocked for regulator - * @opp_table: OPP table returned from _opp_set_regulators(). - */ static void _opp_put_regulators(struct opp_table *opp_table) { int i; @@ -2249,11 +2273,7 @@ static void _put_clks(struct opp_table *opp_table, int count) opp_table->clks = NULL; } -/** - * _opp_set_clknames() - Set clk names for the device - * @dev: Device for which clk names is being set. - * @names: Clk names. - * +/* * In order to support OPP switching, OPP layer needs to get pointers to the * clocks for the device. Simple cases work fine without using this routine * (i.e. by passing connection-id as NULL), but for a device with multiple @@ -2337,10 +2357,6 @@ free_clks: return ret; } -/** - * _opp_put_clknames() - Releases resources blocked for clks. - * @opp_table: OPP table returned from _opp_set_clknames(). - */ static void _opp_put_clknames(struct opp_table *opp_table) { if (!opp_table->clks) @@ -2352,11 +2368,7 @@ static void _opp_put_clknames(struct opp_table *opp_table) _put_clks(opp_table, opp_table->clk_count); } -/** - * _opp_set_config_regulators_helper() - Register custom set regulator helper. - * @dev: Device for which the helper is getting registered. - * @config_regulators: Custom set regulator helper. - * +/* * This is useful to support platforms with multiple regulators per device. * * This must be called before any OPPs are initialized for the device. @@ -2371,20 +2383,13 @@ static int _opp_set_config_regulators_helper(struct opp_table *opp_table, return 0; } -/** - * _opp_put_config_regulators_helper() - Releases resources blocked for - * config_regulators helper. - * @opp_table: OPP table returned from _opp_set_config_regulators_helper(). - * - * Release resources blocked for platform specific config_regulators helper. - */ static void _opp_put_config_regulators_helper(struct opp_table *opp_table) { if (opp_table->config_regulators) opp_table->config_regulators = NULL; } -static void _detach_genpd(struct opp_table *opp_table) +static void _opp_detach_genpd(struct opp_table *opp_table) { int index; @@ -2403,12 +2408,7 @@ static void _detach_genpd(struct opp_table *opp_table) opp_table->genpd_virt_devs = NULL; } -/** - * _opp_attach_genpd - Attach genpd(s) for the device and save virtual device pointer - * @dev: Consumer device for which the genpd is getting attached. - * @names: Null terminated array of pointers containing names of genpd to attach. - * @virt_devs: Pointer to return the array of virtual devices. - * +/* * Multiple generic power domains for a device are supported with the help of * virtual genpd devices, which are created for each consumer device - genpd * pair. These are the device structures which are attached to the power domain @@ -2435,21 +2435,11 @@ static int _opp_attach_genpd(struct opp_table *opp_table, struct device *dev, if (opp_table->genpd_virt_devs) return 0; - /* - * If the genpd's OPP table isn't already initialized, parsing of the - * required-opps fail for dev. We should retry this after genpd's OPP - * table is added. - */ - if (!opp_table->required_opp_count) - return -EPROBE_DEFER; - - mutex_lock(&opp_table->genpd_virt_dev_lock); - opp_table->genpd_virt_devs = kcalloc(opp_table->required_opp_count, sizeof(*opp_table->genpd_virt_devs), GFP_KERNEL); if (!opp_table->genpd_virt_devs) - goto unlock; + return -ENOMEM; while (*name) { if (index >= opp_table->required_opp_count) { @@ -2472,36 +2462,15 @@ static int _opp_attach_genpd(struct opp_table *opp_table, struct device *dev, if (virt_devs) *virt_devs = opp_table->genpd_virt_devs; - mutex_unlock(&opp_table->genpd_virt_dev_lock); return 0; err: - _detach_genpd(opp_table); -unlock: - mutex_unlock(&opp_table->genpd_virt_dev_lock); + _opp_detach_genpd(opp_table); return ret; } -/** - * _opp_detach_genpd() - Detach genpd(s) from the device. - * @opp_table: OPP table returned by _opp_attach_genpd(). - * - * This detaches the genpd(s), resets the virtual device pointers, and puts the - * OPP table. - */ -static void _opp_detach_genpd(struct opp_table *opp_table) -{ - /* - * Acquire genpd_virt_dev_lock to make sure virt_dev isn't getting - * used in parallel. - */ - mutex_lock(&opp_table->genpd_virt_dev_lock); - _detach_genpd(opp_table); - mutex_unlock(&opp_table->genpd_virt_dev_lock); -} - static void _opp_clear_config(struct opp_config_data *data) { if (data->flags & OPP_CONFIG_GENPD) @@ -2642,7 +2611,7 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_set_config); /** * dev_pm_opp_clear_config() - Releases resources blocked for OPP configuration. - * @opp_table: OPP table returned from dev_pm_opp_set_config(). + * @token: The token returned by dev_pm_opp_set_config() previously. * * This allows all device OPP configurations to be cleared at once. This must be * called once for each call made to dev_pm_opp_set_config(), in order to free @@ -2825,10 +2794,9 @@ unlock: } /** - * dev_pm_opp_add() - Add an OPP table from a table definitions - * @dev: device for which we do this operation - * @freq: Frequency in Hz for this OPP - * @u_volt: Voltage in uVolts for this OPP + * dev_pm_opp_add_dynamic() - Add an OPP table from a table definitions + * @dev: The device for which we do this operation + * @data: The OPP data for the OPP to add * * This function adds an opp definition to the opp table and returns status. * The opp is made available by default and it can be controlled using @@ -2841,7 +2809,7 @@ unlock: * Duplicate OPPs (both freq and volt are same) and !opp->available * -ENOMEM Memory allocation failure */ -int dev_pm_opp_add(struct device *dev, unsigned long freq, unsigned long u_volt) +int dev_pm_opp_add_dynamic(struct device *dev, struct dev_pm_opp_data *data) { struct opp_table *opp_table; int ret; @@ -2853,13 +2821,13 @@ int dev_pm_opp_add(struct device *dev, unsigned long freq, unsigned long u_volt) /* Fix regulator count for dynamic OPPs */ opp_table->regulator_count = 1; - ret = _opp_add_v1(opp_table, dev, freq, u_volt, true); + ret = _opp_add_v1(opp_table, dev, data, true); if (ret) dev_pm_opp_put_opp_table(opp_table); return ret; } -EXPORT_SYMBOL_GPL(dev_pm_opp_add); +EXPORT_SYMBOL_GPL(dev_pm_opp_add_dynamic); /** * _opp_set_availability() - helper to set the availability of an opp -- cgit v1.2.3