From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- drivers/phy/samsung/Kconfig | 105 +++ drivers/phy/samsung/Makefile | 17 + drivers/phy/samsung/phy-exynos-dp-video.c | 120 +++ drivers/phy/samsung/phy-exynos-mipi-video.c | 371 +++++++++ drivers/phy/samsung/phy-exynos-pcie.c | 192 +++++ drivers/phy/samsung/phy-exynos4210-usb2.c | 257 ++++++ drivers/phy/samsung/phy-exynos4x12-usb2.c | 375 +++++++++ drivers/phy/samsung/phy-exynos5-usbdrd.c | 1125 +++++++++++++++++++++++++++ drivers/phy/samsung/phy-exynos5250-sata.c | 254 ++++++ drivers/phy/samsung/phy-exynos5250-usb2.c | 418 ++++++++++ drivers/phy/samsung/phy-exynos7-ufs.c | 85 ++ drivers/phy/samsung/phy-exynosautov9-ufs.c | 74 ++ drivers/phy/samsung/phy-fsd-ufs.c | 63 ++ drivers/phy/samsung/phy-s5pv210-usb2.c | 188 +++++ drivers/phy/samsung/phy-samsung-ufs.c | 329 ++++++++ drivers/phy/samsung/phy-samsung-ufs.h | 146 ++++ drivers/phy/samsung/phy-samsung-usb2.c | 261 +++++++ drivers/phy/samsung/phy-samsung-usb2.h | 71 ++ 18 files changed, 4451 insertions(+) create mode 100644 drivers/phy/samsung/Kconfig create mode 100644 drivers/phy/samsung/Makefile create mode 100644 drivers/phy/samsung/phy-exynos-dp-video.c create mode 100644 drivers/phy/samsung/phy-exynos-mipi-video.c create mode 100644 drivers/phy/samsung/phy-exynos-pcie.c create mode 100644 drivers/phy/samsung/phy-exynos4210-usb2.c create mode 100644 drivers/phy/samsung/phy-exynos4x12-usb2.c create mode 100644 drivers/phy/samsung/phy-exynos5-usbdrd.c create mode 100644 drivers/phy/samsung/phy-exynos5250-sata.c create mode 100644 drivers/phy/samsung/phy-exynos5250-usb2.c create mode 100644 drivers/phy/samsung/phy-exynos7-ufs.c create mode 100644 drivers/phy/samsung/phy-exynosautov9-ufs.c create mode 100644 drivers/phy/samsung/phy-fsd-ufs.c create mode 100644 drivers/phy/samsung/phy-s5pv210-usb2.c create mode 100644 drivers/phy/samsung/phy-samsung-ufs.c create mode 100644 drivers/phy/samsung/phy-samsung-ufs.h create mode 100644 drivers/phy/samsung/phy-samsung-usb2.c create mode 100644 drivers/phy/samsung/phy-samsung-usb2.h (limited to 'drivers/phy/samsung') diff --git a/drivers/phy/samsung/Kconfig b/drivers/phy/samsung/Kconfig new file mode 100644 index 0000000000..f10afa3d7f --- /dev/null +++ b/drivers/phy/samsung/Kconfig @@ -0,0 +1,105 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Phy drivers for Samsung platforms +# +config PHY_EXYNOS_DP_VIDEO + tristate "Exynos SoC series Display Port PHY driver" + depends on OF + depends on ARCH_EXYNOS || COMPILE_TEST + default ARCH_EXYNOS + select GENERIC_PHY + help + Support for Display Port PHY found on Samsung Exynos SoCs. + +config PHY_EXYNOS_MIPI_VIDEO + tristate "S5P/Exynos SoC series MIPI CSI-2/DSI PHY driver" + depends on HAS_IOMEM + depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST + select GENERIC_PHY + default y if ARCH_S5PV210 || ARCH_EXYNOS + help + Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P + and Exynos SoCs. + +config PHY_EXYNOS_PCIE + bool "Exynos PCIe PHY driver" + depends on OF && (ARCH_EXYNOS || COMPILE_TEST) + select GENERIC_PHY + help + Enable PCIe PHY support for Exynos SoC series. + This driver provides PHY interface for Exynos PCIe controller. + +config PHY_SAMSUNG_UFS + tristate "Exynos SoC series UFS PHY driver" + depends on OF && (ARCH_EXYNOS || COMPILE_TEST) + select GENERIC_PHY + help + Enable this to support the Samsung Exynos SoC UFS PHY driver for + Samsung Exynos SoCs. This driver provides the interface for UFS host + controller to do PHY related programming. + +config PHY_SAMSUNG_USB2 + tristate "S5P/Exynos SoC series USB 2.0 PHY driver" + depends on HAS_IOMEM + depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2 || COMPILE_TEST + select GENERIC_PHY + select MFD_SYSCON + default ARCH_EXYNOS + help + Enable this to support the Samsung USB 2.0 PHY driver for Samsung + S5Pv210 and Exynos SoCs. This driver provides the interface for USB + 2.0 PHY. Support for particular PHYs will be enabled based on the SoC + type in addition to this driver. + +config PHY_EXYNOS4210_USB2 + bool + depends on PHY_SAMSUNG_USB2 + default CPU_EXYNOS4210 + +config PHY_EXYNOS4X12_USB2 + bool + depends on PHY_SAMSUNG_USB2 + default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412 + +config PHY_EXYNOS5250_USB2 + bool + depends on PHY_SAMSUNG_USB2 + default SOC_EXYNOS5250 || SOC_EXYNOS5420 + +config PHY_S5PV210_USB2 + bool "Support for S5PV210" + depends on PHY_SAMSUNG_USB2 + depends on ARCH_S5PV210 || COMPILE_TEST + help + Enable USB PHY support for S5PV210. This option requires that Samsung + USB 2.0 PHY driver is enabled and means that support for this + particular SoC is compiled in the driver. In case of S5PV210 two phys + are available - device and host. + +config PHY_EXYNOS5_USBDRD + tristate "Exynos5 SoC series USB DRD PHY driver" + depends on (ARCH_EXYNOS && OF) || COMPILE_TEST + depends on HAS_IOMEM + depends on USB_DWC3_EXYNOS + select GENERIC_PHY + select MFD_SYSCON + default y + help + Enable USB DRD PHY support for Exynos 5 SoC series. + This driver provides PHY interface for USB 3.0 DRD controller + present on Exynos5 SoC series. + +config PHY_EXYNOS5250_SATA + tristate "Exynos5250 Sata SerDes/PHY driver" + depends on SOC_EXYNOS5250 + depends on HAS_IOMEM + depends on OF + select GENERIC_PHY + select I2C + select I2C_S3C2410 + select MFD_SYSCON + help + Enable this to support SATA SerDes/Phy found on Samsung's + Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s, + SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host + port to accept one SATA device. diff --git a/drivers/phy/samsung/Makefile b/drivers/phy/samsung/Makefile new file mode 100644 index 0000000000..afb34a153e --- /dev/null +++ b/drivers/phy/samsung/Makefile @@ -0,0 +1,17 @@ +# SPDX-License-Identifier: GPL-2.0 +obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o +obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o +obj-$(CONFIG_PHY_EXYNOS_PCIE) += phy-exynos-pcie.o +obj-$(CONFIG_PHY_SAMSUNG_UFS) += phy-exynos-ufs.o +phy-exynos-ufs-y += phy-samsung-ufs.o +phy-exynos-ufs-y += phy-exynos7-ufs.o +phy-exynos-ufs-y += phy-exynosautov9-ufs.o +phy-exynos-ufs-y += phy-fsd-ufs.o +obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o +phy-exynos-usb2-y += phy-samsung-usb2.o +phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o +phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o +phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o +phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o +obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o +obj-$(CONFIG_PHY_EXYNOS5250_SATA) += phy-exynos5250-sata.o diff --git a/drivers/phy/samsung/phy-exynos-dp-video.c b/drivers/phy/samsung/phy-exynos-dp-video.c new file mode 100644 index 0000000000..a636dee075 --- /dev/null +++ b/drivers/phy/samsung/phy-exynos-dp-video.c @@ -0,0 +1,120 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Samsung Exynos SoC series Display Port PHY driver + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Author: Jingoo Han + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct exynos_dp_video_phy_drvdata { + u32 phy_ctrl_offset; +}; + +struct exynos_dp_video_phy { + struct regmap *regs; + const struct exynos_dp_video_phy_drvdata *drvdata; +}; + +static int exynos_dp_video_phy_power_on(struct phy *phy) +{ + struct exynos_dp_video_phy *state = phy_get_drvdata(phy); + + /* Disable power isolation on DP-PHY */ + return regmap_update_bits(state->regs, state->drvdata->phy_ctrl_offset, + EXYNOS4_PHY_ENABLE, EXYNOS4_PHY_ENABLE); +} + +static int exynos_dp_video_phy_power_off(struct phy *phy) +{ + struct exynos_dp_video_phy *state = phy_get_drvdata(phy); + + /* Enable power isolation on DP-PHY */ + return regmap_update_bits(state->regs, state->drvdata->phy_ctrl_offset, + EXYNOS4_PHY_ENABLE, 0); +} + +static const struct phy_ops exynos_dp_video_phy_ops = { + .power_on = exynos_dp_video_phy_power_on, + .power_off = exynos_dp_video_phy_power_off, + .owner = THIS_MODULE, +}; + +static const struct exynos_dp_video_phy_drvdata exynos5250_dp_video_phy = { + .phy_ctrl_offset = EXYNOS5_DPTX_PHY_CONTROL, +}; + +static const struct exynos_dp_video_phy_drvdata exynos5420_dp_video_phy = { + .phy_ctrl_offset = EXYNOS5420_DPTX_PHY_CONTROL, +}; + +static const struct of_device_id exynos_dp_video_phy_of_match[] = { + { + .compatible = "samsung,exynos5250-dp-video-phy", + .data = &exynos5250_dp_video_phy, + }, { + .compatible = "samsung,exynos5420-dp-video-phy", + .data = &exynos5420_dp_video_phy, + }, + { }, +}; +MODULE_DEVICE_TABLE(of, exynos_dp_video_phy_of_match); + +static int exynos_dp_video_phy_probe(struct platform_device *pdev) +{ + struct exynos_dp_video_phy *state; + struct device *dev = &pdev->dev; + struct phy_provider *phy_provider; + struct phy *phy; + + state = devm_kzalloc(dev, sizeof(*state), GFP_KERNEL); + if (!state) + return -ENOMEM; + + state->regs = syscon_node_to_regmap(dev->parent->of_node); + if (IS_ERR(state->regs)) + /* Backwards compatible way */ + state->regs = syscon_regmap_lookup_by_phandle(dev->of_node, + "samsung,pmu-syscon"); + if (IS_ERR(state->regs)) { + dev_err(dev, "Failed to lookup PMU regmap\n"); + return PTR_ERR(state->regs); + } + + state->drvdata = of_device_get_match_data(dev); + + phy = devm_phy_create(dev, NULL, &exynos_dp_video_phy_ops); + if (IS_ERR(phy)) { + dev_err(dev, "failed to create Display Port PHY\n"); + return PTR_ERR(phy); + } + phy_set_drvdata(phy, state); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static struct platform_driver exynos_dp_video_phy_driver = { + .probe = exynos_dp_video_phy_probe, + .driver = { + .name = "exynos-dp-video-phy", + .of_match_table = exynos_dp_video_phy_of_match, + .suppress_bind_attrs = true, + } +}; +module_platform_driver(exynos_dp_video_phy_driver); + +MODULE_AUTHOR("Jingoo Han "); +MODULE_DESCRIPTION("Samsung Exynos SoC DP PHY driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/samsung/phy-exynos-mipi-video.c b/drivers/phy/samsung/phy-exynos-mipi-video.c new file mode 100644 index 0000000000..592d8067e8 --- /dev/null +++ b/drivers/phy/samsung/phy-exynos-mipi-video.c @@ -0,0 +1,371 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Samsung S5P/Exynos SoC series MIPI CSIS/DSIM DPHY driver + * + * Copyright (C) 2013,2016 Samsung Electronics Co., Ltd. + * Author: Sylwester Nawrocki + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +enum exynos_mipi_phy_id { + EXYNOS_MIPI_PHY_ID_NONE = -1, + EXYNOS_MIPI_PHY_ID_CSIS0, + EXYNOS_MIPI_PHY_ID_DSIM0, + EXYNOS_MIPI_PHY_ID_CSIS1, + EXYNOS_MIPI_PHY_ID_DSIM1, + EXYNOS_MIPI_PHY_ID_CSIS2, + EXYNOS_MIPI_PHYS_NUM +}; + +enum exynos_mipi_phy_regmap_id { + EXYNOS_MIPI_REGMAP_PMU, + EXYNOS_MIPI_REGMAP_DISP, + EXYNOS_MIPI_REGMAP_CAM0, + EXYNOS_MIPI_REGMAP_CAM1, + EXYNOS_MIPI_REGMAPS_NUM +}; + +struct mipi_phy_device_desc { + int num_phys; + int num_regmaps; + const char *regmap_names[EXYNOS_MIPI_REGMAPS_NUM]; + struct exynos_mipi_phy_desc { + enum exynos_mipi_phy_id coupled_phy_id; + u32 enable_val; + unsigned int enable_reg; + enum exynos_mipi_phy_regmap_id enable_map; + u32 resetn_val; + unsigned int resetn_reg; + enum exynos_mipi_phy_regmap_id resetn_map; + } phys[EXYNOS_MIPI_PHYS_NUM]; +}; + +static const struct mipi_phy_device_desc s5pv210_mipi_phy = { + .num_regmaps = 1, + .regmap_names = {"syscon"}, + .num_phys = 4, + .phys = { + { + /* EXYNOS_MIPI_PHY_ID_CSIS0 */ + .coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM0, + .enable_val = EXYNOS4_PHY_ENABLE, + .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(0), + .enable_map = EXYNOS_MIPI_REGMAP_PMU, + .resetn_val = EXYNOS4_MIPI_PHY_SRESETN, + .resetn_reg = EXYNOS4_MIPI_PHY_CONTROL(0), + .resetn_map = EXYNOS_MIPI_REGMAP_PMU, + }, { + /* EXYNOS_MIPI_PHY_ID_DSIM0 */ + .coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS0, + .enable_val = EXYNOS4_PHY_ENABLE, + .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(0), + .enable_map = EXYNOS_MIPI_REGMAP_PMU, + .resetn_val = EXYNOS4_MIPI_PHY_MRESETN, + .resetn_reg = EXYNOS4_MIPI_PHY_CONTROL(0), + .resetn_map = EXYNOS_MIPI_REGMAP_PMU, + }, { + /* EXYNOS_MIPI_PHY_ID_CSIS1 */ + .coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM1, + .enable_val = EXYNOS4_PHY_ENABLE, + .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(1), + .enable_map = EXYNOS_MIPI_REGMAP_PMU, + .resetn_val = EXYNOS4_MIPI_PHY_SRESETN, + .resetn_reg = EXYNOS4_MIPI_PHY_CONTROL(1), + .resetn_map = EXYNOS_MIPI_REGMAP_PMU, + }, { + /* EXYNOS_MIPI_PHY_ID_DSIM1 */ + .coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS1, + .enable_val = EXYNOS4_PHY_ENABLE, + .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(1), + .enable_map = EXYNOS_MIPI_REGMAP_PMU, + .resetn_val = EXYNOS4_MIPI_PHY_MRESETN, + .resetn_reg = EXYNOS4_MIPI_PHY_CONTROL(1), + .resetn_map = EXYNOS_MIPI_REGMAP_PMU, + }, + }, +}; + +static const struct mipi_phy_device_desc exynos5420_mipi_phy = { + .num_regmaps = 1, + .regmap_names = {"syscon"}, + .num_phys = 5, + .phys = { + { + /* EXYNOS_MIPI_PHY_ID_CSIS0 */ + .coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM0, + .enable_val = EXYNOS4_PHY_ENABLE, + .enable_reg = EXYNOS5420_MIPI_PHY_CONTROL(0), + .enable_map = EXYNOS_MIPI_REGMAP_PMU, + .resetn_val = EXYNOS4_MIPI_PHY_SRESETN, + .resetn_reg = EXYNOS5420_MIPI_PHY_CONTROL(0), + .resetn_map = EXYNOS_MIPI_REGMAP_PMU, + }, { + /* EXYNOS_MIPI_PHY_ID_DSIM0 */ + .coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS0, + .enable_val = EXYNOS4_PHY_ENABLE, + .enable_reg = EXYNOS5420_MIPI_PHY_CONTROL(0), + .enable_map = EXYNOS_MIPI_REGMAP_PMU, + .resetn_val = EXYNOS4_MIPI_PHY_MRESETN, + .resetn_reg = EXYNOS5420_MIPI_PHY_CONTROL(0), + .resetn_map = EXYNOS_MIPI_REGMAP_PMU, + }, { + /* EXYNOS_MIPI_PHY_ID_CSIS1 */ + .coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM1, + .enable_val = EXYNOS4_PHY_ENABLE, + .enable_reg = EXYNOS5420_MIPI_PHY_CONTROL(1), + .enable_map = EXYNOS_MIPI_REGMAP_PMU, + .resetn_val = EXYNOS4_MIPI_PHY_SRESETN, + .resetn_reg = EXYNOS5420_MIPI_PHY_CONTROL(1), + .resetn_map = EXYNOS_MIPI_REGMAP_PMU, + }, { + /* EXYNOS_MIPI_PHY_ID_DSIM1 */ + .coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS1, + .enable_val = EXYNOS4_PHY_ENABLE, + .enable_reg = EXYNOS5420_MIPI_PHY_CONTROL(1), + .enable_map = EXYNOS_MIPI_REGMAP_PMU, + .resetn_val = EXYNOS4_MIPI_PHY_MRESETN, + .resetn_reg = EXYNOS5420_MIPI_PHY_CONTROL(1), + .resetn_map = EXYNOS_MIPI_REGMAP_PMU, + }, { + /* EXYNOS_MIPI_PHY_ID_CSIS2 */ + .coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE, + .enable_val = EXYNOS4_PHY_ENABLE, + .enable_reg = EXYNOS5420_MIPI_PHY_CONTROL(2), + .enable_map = EXYNOS_MIPI_REGMAP_PMU, + .resetn_val = EXYNOS4_MIPI_PHY_SRESETN, + .resetn_reg = EXYNOS5420_MIPI_PHY_CONTROL(2), + .resetn_map = EXYNOS_MIPI_REGMAP_PMU, + }, + }, +}; + +#define EXYNOS5433_SYSREG_DISP_MIPI_PHY 0x100C +#define EXYNOS5433_SYSREG_CAM0_MIPI_DPHY_CON 0x1014 +#define EXYNOS5433_SYSREG_CAM1_MIPI_DPHY_CON 0x1020 + +static const struct mipi_phy_device_desc exynos5433_mipi_phy = { + .num_regmaps = 4, + .regmap_names = { + "samsung,pmu-syscon", + "samsung,disp-sysreg", + "samsung,cam0-sysreg", + "samsung,cam1-sysreg" + }, + .num_phys = 5, + .phys = { + { + /* EXYNOS_MIPI_PHY_ID_CSIS0 */ + .coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM0, + .enable_val = EXYNOS4_PHY_ENABLE, + .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(0), + .enable_map = EXYNOS_MIPI_REGMAP_PMU, + .resetn_val = BIT(0), + .resetn_reg = EXYNOS5433_SYSREG_CAM0_MIPI_DPHY_CON, + .resetn_map = EXYNOS_MIPI_REGMAP_CAM0, + }, { + /* EXYNOS_MIPI_PHY_ID_DSIM0 */ + .coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS0, + .enable_val = EXYNOS4_PHY_ENABLE, + .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(0), + .enable_map = EXYNOS_MIPI_REGMAP_PMU, + .resetn_val = BIT(0), + .resetn_reg = EXYNOS5433_SYSREG_DISP_MIPI_PHY, + .resetn_map = EXYNOS_MIPI_REGMAP_DISP, + }, { + /* EXYNOS_MIPI_PHY_ID_CSIS1 */ + .coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE, + .enable_val = EXYNOS4_PHY_ENABLE, + .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(1), + .enable_map = EXYNOS_MIPI_REGMAP_PMU, + .resetn_val = BIT(1), + .resetn_reg = EXYNOS5433_SYSREG_CAM0_MIPI_DPHY_CON, + .resetn_map = EXYNOS_MIPI_REGMAP_CAM0, + }, { + /* EXYNOS_MIPI_PHY_ID_DSIM1 */ + .coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE, + .enable_val = EXYNOS4_PHY_ENABLE, + .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(1), + .enable_map = EXYNOS_MIPI_REGMAP_PMU, + .resetn_val = BIT(1), + .resetn_reg = EXYNOS5433_SYSREG_DISP_MIPI_PHY, + .resetn_map = EXYNOS_MIPI_REGMAP_DISP, + }, { + /* EXYNOS_MIPI_PHY_ID_CSIS2 */ + .coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE, + .enable_val = EXYNOS4_PHY_ENABLE, + .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(2), + .enable_map = EXYNOS_MIPI_REGMAP_PMU, + .resetn_val = BIT(0), + .resetn_reg = EXYNOS5433_SYSREG_CAM1_MIPI_DPHY_CON, + .resetn_map = EXYNOS_MIPI_REGMAP_CAM1, + }, + }, +}; + +struct exynos_mipi_video_phy { + struct regmap *regmaps[EXYNOS_MIPI_REGMAPS_NUM]; + int num_phys; + struct video_phy_desc { + struct phy *phy; + unsigned int index; + const struct exynos_mipi_phy_desc *data; + } phys[EXYNOS_MIPI_PHYS_NUM]; + spinlock_t slock; +}; + +static int __set_phy_state(const struct exynos_mipi_phy_desc *data, + struct exynos_mipi_video_phy *state, unsigned int on) +{ + struct regmap *enable_map = state->regmaps[data->enable_map]; + struct regmap *resetn_map = state->regmaps[data->resetn_map]; + + spin_lock(&state->slock); + + /* disable in PMU sysreg */ + if (!on && data->coupled_phy_id >= 0 && + state->phys[data->coupled_phy_id].phy->power_count == 0) + regmap_update_bits(enable_map, data->enable_reg, + data->enable_val, 0); + /* PHY reset */ + if (on) + regmap_update_bits(resetn_map, data->resetn_reg, + data->resetn_val, data->resetn_val); + else + regmap_update_bits(resetn_map, data->resetn_reg, + data->resetn_val, 0); + /* enable in PMU sysreg */ + if (on) + regmap_update_bits(enable_map, data->enable_reg, + data->enable_val, data->enable_val); + + spin_unlock(&state->slock); + + return 0; +} + +#define to_mipi_video_phy(desc) \ + container_of((desc), struct exynos_mipi_video_phy, phys[(desc)->index]) + +static int exynos_mipi_video_phy_power_on(struct phy *phy) +{ + struct video_phy_desc *phy_desc = phy_get_drvdata(phy); + struct exynos_mipi_video_phy *state = to_mipi_video_phy(phy_desc); + + return __set_phy_state(phy_desc->data, state, 1); +} + +static int exynos_mipi_video_phy_power_off(struct phy *phy) +{ + struct video_phy_desc *phy_desc = phy_get_drvdata(phy); + struct exynos_mipi_video_phy *state = to_mipi_video_phy(phy_desc); + + return __set_phy_state(phy_desc->data, state, 0); +} + +static struct phy *exynos_mipi_video_phy_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct exynos_mipi_video_phy *state = dev_get_drvdata(dev); + + if (WARN_ON(args->args[0] >= state->num_phys)) + return ERR_PTR(-ENODEV); + + return state->phys[args->args[0]].phy; +} + +static const struct phy_ops exynos_mipi_video_phy_ops = { + .power_on = exynos_mipi_video_phy_power_on, + .power_off = exynos_mipi_video_phy_power_off, + .owner = THIS_MODULE, +}; + +static int exynos_mipi_video_phy_probe(struct platform_device *pdev) +{ + const struct mipi_phy_device_desc *phy_dev; + struct exynos_mipi_video_phy *state; + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct phy_provider *phy_provider; + unsigned int i = 0; + + phy_dev = of_device_get_match_data(dev); + if (!phy_dev) + return -ENODEV; + + state = devm_kzalloc(dev, sizeof(*state), GFP_KERNEL); + if (!state) + return -ENOMEM; + + state->regmaps[i] = syscon_node_to_regmap(dev->parent->of_node); + if (!IS_ERR(state->regmaps[i])) + i++; + for (; i < phy_dev->num_regmaps; i++) { + state->regmaps[i] = syscon_regmap_lookup_by_phandle(np, + phy_dev->regmap_names[i]); + if (IS_ERR(state->regmaps[i])) + return PTR_ERR(state->regmaps[i]); + } + state->num_phys = phy_dev->num_phys; + spin_lock_init(&state->slock); + + dev_set_drvdata(dev, state); + + for (i = 0; i < state->num_phys; i++) { + struct phy *phy = devm_phy_create(dev, NULL, + &exynos_mipi_video_phy_ops); + if (IS_ERR(phy)) { + dev_err(dev, "failed to create PHY %d\n", i); + return PTR_ERR(phy); + } + + state->phys[i].phy = phy; + state->phys[i].index = i; + state->phys[i].data = &phy_dev->phys[i]; + phy_set_drvdata(phy, &state->phys[i]); + } + + phy_provider = devm_of_phy_provider_register(dev, + exynos_mipi_video_phy_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct of_device_id exynos_mipi_video_phy_of_match[] = { + { + .compatible = "samsung,s5pv210-mipi-video-phy", + .data = &s5pv210_mipi_phy, + }, { + .compatible = "samsung,exynos5420-mipi-video-phy", + .data = &exynos5420_mipi_phy, + }, { + .compatible = "samsung,exynos5433-mipi-video-phy", + .data = &exynos5433_mipi_phy, + }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, exynos_mipi_video_phy_of_match); + +static struct platform_driver exynos_mipi_video_phy_driver = { + .probe = exynos_mipi_video_phy_probe, + .driver = { + .of_match_table = exynos_mipi_video_phy_of_match, + .name = "exynos-mipi-video-phy", + .suppress_bind_attrs = true, + } +}; +module_platform_driver(exynos_mipi_video_phy_driver); + +MODULE_DESCRIPTION("Samsung S5P/Exynos SoC MIPI CSI-2/DSI PHY driver"); +MODULE_AUTHOR("Sylwester Nawrocki "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/samsung/phy-exynos-pcie.c b/drivers/phy/samsung/phy-exynos-pcie.c new file mode 100644 index 0000000000..53c9230c29 --- /dev/null +++ b/drivers/phy/samsung/phy-exynos-pcie.c @@ -0,0 +1,192 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Samsung Exynos SoC series PCIe PHY driver + * + * Phy provider for PCIe controller on Exynos SoC series + * + * Copyright (C) 2017-2020 Samsung Electronics Co., Ltd. + * Jaehoon Chung + */ + +#include +#include +#include +#include +#include +#include + +#define PCIE_PHY_OFFSET(x) ((x) * 0x4) + +/* Sysreg FSYS register offsets and bits for Exynos5433 */ +#define PCIE_EXYNOS5433_PHY_MAC_RESET 0x0208 +#define PCIE_MAC_RESET_MASK 0xFF +#define PCIE_MAC_RESET BIT(4) +#define PCIE_EXYNOS5433_PHY_L1SUB_CM_CON 0x1010 +#define PCIE_REFCLK_GATING_EN BIT(0) +#define PCIE_EXYNOS5433_PHY_COMMON_RESET 0x1020 +#define PCIE_PHY_RESET BIT(0) +#define PCIE_EXYNOS5433_PHY_GLOBAL_RESET 0x1040 +#define PCIE_GLOBAL_RESET BIT(0) +#define PCIE_REFCLK BIT(1) +#define PCIE_REFCLK_MASK 0x16 +#define PCIE_APP_REQ_EXIT_L1_MODE BIT(5) + +/* PMU PCIE PHY isolation control */ +#define EXYNOS5433_PMU_PCIE_PHY_OFFSET 0x730 + +/* For Exynos pcie phy */ +struct exynos_pcie_phy { + void __iomem *base; + struct regmap *pmureg; + struct regmap *fsysreg; +}; + +static void exynos_pcie_phy_writel(void __iomem *base, u32 val, u32 offset) +{ + writel(val, base + offset); +} + +/* Exynos5433 specific functions */ +static int exynos5433_pcie_phy_init(struct phy *phy) +{ + struct exynos_pcie_phy *ep = phy_get_drvdata(phy); + + regmap_update_bits(ep->pmureg, EXYNOS5433_PMU_PCIE_PHY_OFFSET, + BIT(0), 1); + regmap_update_bits(ep->fsysreg, PCIE_EXYNOS5433_PHY_GLOBAL_RESET, + PCIE_APP_REQ_EXIT_L1_MODE, 0); + regmap_update_bits(ep->fsysreg, PCIE_EXYNOS5433_PHY_L1SUB_CM_CON, + PCIE_REFCLK_GATING_EN, 0); + + regmap_update_bits(ep->fsysreg, PCIE_EXYNOS5433_PHY_COMMON_RESET, + PCIE_PHY_RESET, 1); + regmap_update_bits(ep->fsysreg, PCIE_EXYNOS5433_PHY_MAC_RESET, + PCIE_MAC_RESET, 0); + + /* PHY refclk 24MHz */ + regmap_update_bits(ep->fsysreg, PCIE_EXYNOS5433_PHY_GLOBAL_RESET, + PCIE_REFCLK_MASK, PCIE_REFCLK); + regmap_update_bits(ep->fsysreg, PCIE_EXYNOS5433_PHY_GLOBAL_RESET, + PCIE_GLOBAL_RESET, 0); + + + exynos_pcie_phy_writel(ep->base, 0x11, PCIE_PHY_OFFSET(0x3)); + + /* band gap reference on */ + exynos_pcie_phy_writel(ep->base, 0, PCIE_PHY_OFFSET(0x20)); + exynos_pcie_phy_writel(ep->base, 0, PCIE_PHY_OFFSET(0x4b)); + + /* jitter tuning */ + exynos_pcie_phy_writel(ep->base, 0x34, PCIE_PHY_OFFSET(0x4)); + exynos_pcie_phy_writel(ep->base, 0x02, PCIE_PHY_OFFSET(0x7)); + exynos_pcie_phy_writel(ep->base, 0x41, PCIE_PHY_OFFSET(0x21)); + exynos_pcie_phy_writel(ep->base, 0x7F, PCIE_PHY_OFFSET(0x14)); + exynos_pcie_phy_writel(ep->base, 0xC0, PCIE_PHY_OFFSET(0x15)); + exynos_pcie_phy_writel(ep->base, 0x61, PCIE_PHY_OFFSET(0x36)); + + /* D0 uninit.. */ + exynos_pcie_phy_writel(ep->base, 0x44, PCIE_PHY_OFFSET(0x3D)); + + /* 24MHz */ + exynos_pcie_phy_writel(ep->base, 0x94, PCIE_PHY_OFFSET(0x8)); + exynos_pcie_phy_writel(ep->base, 0xA7, PCIE_PHY_OFFSET(0x9)); + exynos_pcie_phy_writel(ep->base, 0x93, PCIE_PHY_OFFSET(0xA)); + exynos_pcie_phy_writel(ep->base, 0x6B, PCIE_PHY_OFFSET(0xC)); + exynos_pcie_phy_writel(ep->base, 0xA5, PCIE_PHY_OFFSET(0xF)); + exynos_pcie_phy_writel(ep->base, 0x34, PCIE_PHY_OFFSET(0x16)); + exynos_pcie_phy_writel(ep->base, 0xA3, PCIE_PHY_OFFSET(0x17)); + exynos_pcie_phy_writel(ep->base, 0xA7, PCIE_PHY_OFFSET(0x1A)); + exynos_pcie_phy_writel(ep->base, 0x71, PCIE_PHY_OFFSET(0x23)); + exynos_pcie_phy_writel(ep->base, 0x4C, PCIE_PHY_OFFSET(0x24)); + + exynos_pcie_phy_writel(ep->base, 0x0E, PCIE_PHY_OFFSET(0x26)); + exynos_pcie_phy_writel(ep->base, 0x14, PCIE_PHY_OFFSET(0x7)); + exynos_pcie_phy_writel(ep->base, 0x48, PCIE_PHY_OFFSET(0x43)); + exynos_pcie_phy_writel(ep->base, 0x44, PCIE_PHY_OFFSET(0x44)); + exynos_pcie_phy_writel(ep->base, 0x03, PCIE_PHY_OFFSET(0x45)); + exynos_pcie_phy_writel(ep->base, 0xA7, PCIE_PHY_OFFSET(0x48)); + exynos_pcie_phy_writel(ep->base, 0x13, PCIE_PHY_OFFSET(0x54)); + exynos_pcie_phy_writel(ep->base, 0x04, PCIE_PHY_OFFSET(0x31)); + exynos_pcie_phy_writel(ep->base, 0, PCIE_PHY_OFFSET(0x32)); + + regmap_update_bits(ep->fsysreg, PCIE_EXYNOS5433_PHY_COMMON_RESET, + PCIE_PHY_RESET, 0); + regmap_update_bits(ep->fsysreg, PCIE_EXYNOS5433_PHY_MAC_RESET, + PCIE_MAC_RESET_MASK, PCIE_MAC_RESET); + return 0; +} + +static int exynos5433_pcie_phy_exit(struct phy *phy) +{ + struct exynos_pcie_phy *ep = phy_get_drvdata(phy); + + regmap_update_bits(ep->fsysreg, PCIE_EXYNOS5433_PHY_L1SUB_CM_CON, + PCIE_REFCLK_GATING_EN, PCIE_REFCLK_GATING_EN); + regmap_update_bits(ep->pmureg, EXYNOS5433_PMU_PCIE_PHY_OFFSET, + BIT(0), 0); + return 0; +} + +static const struct phy_ops exynos5433_phy_ops = { + .init = exynos5433_pcie_phy_init, + .exit = exynos5433_pcie_phy_exit, + .owner = THIS_MODULE, +}; + +static const struct of_device_id exynos_pcie_phy_match[] = { + { + .compatible = "samsung,exynos5433-pcie-phy", + }, + {}, +}; + +static int exynos_pcie_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct exynos_pcie_phy *exynos_phy; + struct phy *generic_phy; + struct phy_provider *phy_provider; + + exynos_phy = devm_kzalloc(dev, sizeof(*exynos_phy), GFP_KERNEL); + if (!exynos_phy) + return -ENOMEM; + + exynos_phy->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(exynos_phy->base)) + return PTR_ERR(exynos_phy->base); + + exynos_phy->pmureg = syscon_regmap_lookup_by_phandle(dev->of_node, + "samsung,pmu-syscon"); + if (IS_ERR(exynos_phy->pmureg)) { + dev_err(&pdev->dev, "PMU regmap lookup failed.\n"); + return PTR_ERR(exynos_phy->pmureg); + } + + exynos_phy->fsysreg = syscon_regmap_lookup_by_phandle(dev->of_node, + "samsung,fsys-sysreg"); + if (IS_ERR(exynos_phy->fsysreg)) { + dev_err(&pdev->dev, "FSYS sysreg regmap lookup failed.\n"); + return PTR_ERR(exynos_phy->fsysreg); + } + + generic_phy = devm_phy_create(dev, dev->of_node, &exynos5433_phy_ops); + if (IS_ERR(generic_phy)) { + dev_err(dev, "failed to create PHY\n"); + return PTR_ERR(generic_phy); + } + + phy_set_drvdata(generic_phy, exynos_phy); + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static struct platform_driver exynos_pcie_phy_driver = { + .probe = exynos_pcie_phy_probe, + .driver = { + .of_match_table = exynos_pcie_phy_match, + .name = "exynos_pcie_phy", + .suppress_bind_attrs = true, + } +}; +builtin_platform_driver(exynos_pcie_phy_driver); diff --git a/drivers/phy/samsung/phy-exynos4210-usb2.c b/drivers/phy/samsung/phy-exynos4210-usb2.c new file mode 100644 index 0000000000..3898a7f582 --- /dev/null +++ b/drivers/phy/samsung/phy-exynos4210-usb2.c @@ -0,0 +1,257 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Samsung SoC USB 1.1/2.0 PHY driver - Exynos 4210 support + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Author: Kamil Debski + */ + +#include +#include +#include +#include +#include "phy-samsung-usb2.h" + +/* Exynos USB PHY registers */ + +/* PHY power control */ +#define EXYNOS_4210_UPHYPWR 0x0 + +#define EXYNOS_4210_UPHYPWR_PHY0_SUSPEND BIT(0) +#define EXYNOS_4210_UPHYPWR_PHY0_PWR BIT(3) +#define EXYNOS_4210_UPHYPWR_PHY0_OTG_PWR BIT(4) +#define EXYNOS_4210_UPHYPWR_PHY0_SLEEP BIT(5) +#define EXYNOS_4210_UPHYPWR_PHY0 ( \ + EXYNOS_4210_UPHYPWR_PHY0_SUSPEND | \ + EXYNOS_4210_UPHYPWR_PHY0_PWR | \ + EXYNOS_4210_UPHYPWR_PHY0_OTG_PWR | \ + EXYNOS_4210_UPHYPWR_PHY0_SLEEP) + +#define EXYNOS_4210_UPHYPWR_PHY1_SUSPEND BIT(6) +#define EXYNOS_4210_UPHYPWR_PHY1_PWR BIT(7) +#define EXYNOS_4210_UPHYPWR_PHY1_SLEEP BIT(8) +#define EXYNOS_4210_UPHYPWR_PHY1 ( \ + EXYNOS_4210_UPHYPWR_PHY1_SUSPEND | \ + EXYNOS_4210_UPHYPWR_PHY1_PWR | \ + EXYNOS_4210_UPHYPWR_PHY1_SLEEP) + +#define EXYNOS_4210_UPHYPWR_HSIC0_SUSPEND BIT(9) +#define EXYNOS_4210_UPHYPWR_HSIC0_SLEEP BIT(10) +#define EXYNOS_4210_UPHYPWR_HSIC0 ( \ + EXYNOS_4210_UPHYPWR_HSIC0_SUSPEND | \ + EXYNOS_4210_UPHYPWR_HSIC0_SLEEP) + +#define EXYNOS_4210_UPHYPWR_HSIC1_SUSPEND BIT(11) +#define EXYNOS_4210_UPHYPWR_HSIC1_SLEEP BIT(12) +#define EXYNOS_4210_UPHYPWR_HSIC1 ( \ + EXYNOS_4210_UPHYPWR_HSIC1_SUSPEND | \ + EXYNOS_4210_UPHYPWR_HSIC1_SLEEP) + +/* PHY clock control */ +#define EXYNOS_4210_UPHYCLK 0x4 + +#define EXYNOS_4210_UPHYCLK_PHYFSEL_MASK (0x3 << 0) +#define EXYNOS_4210_UPHYCLK_PHYFSEL_OFFSET 0 +#define EXYNOS_4210_UPHYCLK_PHYFSEL_48MHZ (0x0 << 0) +#define EXYNOS_4210_UPHYCLK_PHYFSEL_24MHZ (0x3 << 0) +#define EXYNOS_4210_UPHYCLK_PHYFSEL_12MHZ (0x2 << 0) + +#define EXYNOS_4210_UPHYCLK_PHY0_ID_PULLUP BIT(2) +#define EXYNOS_4210_UPHYCLK_PHY0_COMMON_ON BIT(4) +#define EXYNOS_4210_UPHYCLK_PHY1_COMMON_ON BIT(7) + +/* PHY reset control */ +#define EXYNOS_4210_UPHYRST 0x8 + +#define EXYNOS_4210_URSTCON_PHY0 BIT(0) +#define EXYNOS_4210_URSTCON_OTG_HLINK BIT(1) +#define EXYNOS_4210_URSTCON_OTG_PHYLINK BIT(2) +#define EXYNOS_4210_URSTCON_PHY1_ALL BIT(3) +#define EXYNOS_4210_URSTCON_PHY1_P0 BIT(4) +#define EXYNOS_4210_URSTCON_PHY1_P1P2 BIT(5) +#define EXYNOS_4210_URSTCON_HOST_LINK_ALL BIT(6) +#define EXYNOS_4210_URSTCON_HOST_LINK_P0 BIT(7) +#define EXYNOS_4210_URSTCON_HOST_LINK_P1 BIT(8) +#define EXYNOS_4210_URSTCON_HOST_LINK_P2 BIT(9) + +/* Isolation, configured in the power management unit */ +#define EXYNOS_4210_USB_ISOL_DEVICE_OFFSET 0x704 +#define EXYNOS_4210_USB_ISOL_DEVICE BIT(0) +#define EXYNOS_4210_USB_ISOL_HOST_OFFSET 0x708 +#define EXYNOS_4210_USB_ISOL_HOST BIT(0) + +/* USBYPHY1 Floating prevention */ +#define EXYNOS_4210_UPHY1CON 0x34 +#define EXYNOS_4210_UPHY1CON_FLOAT_PREVENTION 0x1 + +/* Mode switching SUB Device <-> Host */ +#define EXYNOS_4210_MODE_SWITCH_OFFSET 0x21c +#define EXYNOS_4210_MODE_SWITCH_MASK 1 +#define EXYNOS_4210_MODE_SWITCH_DEVICE 0 +#define EXYNOS_4210_MODE_SWITCH_HOST 1 + +enum exynos4210_phy_id { + EXYNOS4210_DEVICE, + EXYNOS4210_HOST, + EXYNOS4210_HSIC0, + EXYNOS4210_HSIC1, + EXYNOS4210_NUM_PHYS, +}; + +/* + * exynos4210_rate_to_clk() converts the supplied clock rate to the value that + * can be written to the phy register. + */ +static int exynos4210_rate_to_clk(unsigned long rate, u32 *reg) +{ + switch (rate) { + case 12 * MHZ: + *reg = EXYNOS_4210_UPHYCLK_PHYFSEL_12MHZ; + break; + case 24 * MHZ: + *reg = EXYNOS_4210_UPHYCLK_PHYFSEL_24MHZ; + break; + case 48 * MHZ: + *reg = EXYNOS_4210_UPHYCLK_PHYFSEL_48MHZ; + break; + default: + return -EINVAL; + } + + return 0; +} + +static void exynos4210_isol(struct samsung_usb2_phy_instance *inst, bool on) +{ + struct samsung_usb2_phy_driver *drv = inst->drv; + u32 offset; + u32 mask; + + switch (inst->cfg->id) { + case EXYNOS4210_DEVICE: + offset = EXYNOS_4210_USB_ISOL_DEVICE_OFFSET; + mask = EXYNOS_4210_USB_ISOL_DEVICE; + break; + case EXYNOS4210_HOST: + offset = EXYNOS_4210_USB_ISOL_HOST_OFFSET; + mask = EXYNOS_4210_USB_ISOL_HOST; + break; + default: + return; + } + + regmap_update_bits(drv->reg_pmu, offset, mask, on ? 0 : mask); +} + +static void exynos4210_phy_pwr(struct samsung_usb2_phy_instance *inst, bool on) +{ + struct samsung_usb2_phy_driver *drv = inst->drv; + u32 rstbits = 0; + u32 phypwr = 0; + u32 rst; + u32 pwr; + u32 clk; + + switch (inst->cfg->id) { + case EXYNOS4210_DEVICE: + phypwr = EXYNOS_4210_UPHYPWR_PHY0; + rstbits = EXYNOS_4210_URSTCON_PHY0; + break; + case EXYNOS4210_HOST: + phypwr = EXYNOS_4210_UPHYPWR_PHY1; + rstbits = EXYNOS_4210_URSTCON_PHY1_ALL | + EXYNOS_4210_URSTCON_PHY1_P0 | + EXYNOS_4210_URSTCON_PHY1_P1P2 | + EXYNOS_4210_URSTCON_HOST_LINK_ALL | + EXYNOS_4210_URSTCON_HOST_LINK_P0; + writel(on, drv->reg_phy + EXYNOS_4210_UPHY1CON); + break; + case EXYNOS4210_HSIC0: + phypwr = EXYNOS_4210_UPHYPWR_HSIC0; + rstbits = EXYNOS_4210_URSTCON_PHY1_P1P2 | + EXYNOS_4210_URSTCON_HOST_LINK_P1; + break; + case EXYNOS4210_HSIC1: + phypwr = EXYNOS_4210_UPHYPWR_HSIC1; + rstbits = EXYNOS_4210_URSTCON_PHY1_P1P2 | + EXYNOS_4210_URSTCON_HOST_LINK_P2; + break; + } + + if (on) { + clk = readl(drv->reg_phy + EXYNOS_4210_UPHYCLK); + clk &= ~EXYNOS_4210_UPHYCLK_PHYFSEL_MASK; + clk |= drv->ref_reg_val << EXYNOS_4210_UPHYCLK_PHYFSEL_OFFSET; + writel(clk, drv->reg_phy + EXYNOS_4210_UPHYCLK); + + pwr = readl(drv->reg_phy + EXYNOS_4210_UPHYPWR); + pwr &= ~phypwr; + writel(pwr, drv->reg_phy + EXYNOS_4210_UPHYPWR); + + rst = readl(drv->reg_phy + EXYNOS_4210_UPHYRST); + rst |= rstbits; + writel(rst, drv->reg_phy + EXYNOS_4210_UPHYRST); + udelay(10); + rst &= ~rstbits; + writel(rst, drv->reg_phy + EXYNOS_4210_UPHYRST); + /* The following delay is necessary for the reset sequence to be + * completed */ + udelay(80); + } else { + pwr = readl(drv->reg_phy + EXYNOS_4210_UPHYPWR); + pwr |= phypwr; + writel(pwr, drv->reg_phy + EXYNOS_4210_UPHYPWR); + } +} + +static int exynos4210_power_on(struct samsung_usb2_phy_instance *inst) +{ + /* Order of initialisation is important - first power then isolation */ + exynos4210_phy_pwr(inst, 1); + exynos4210_isol(inst, 0); + + return 0; +} + +static int exynos4210_power_off(struct samsung_usb2_phy_instance *inst) +{ + exynos4210_isol(inst, 1); + exynos4210_phy_pwr(inst, 0); + + return 0; +} + + +static const struct samsung_usb2_common_phy exynos4210_phys[] = { + { + .label = "device", + .id = EXYNOS4210_DEVICE, + .power_on = exynos4210_power_on, + .power_off = exynos4210_power_off, + }, + { + .label = "host", + .id = EXYNOS4210_HOST, + .power_on = exynos4210_power_on, + .power_off = exynos4210_power_off, + }, + { + .label = "hsic0", + .id = EXYNOS4210_HSIC0, + .power_on = exynos4210_power_on, + .power_off = exynos4210_power_off, + }, + { + .label = "hsic1", + .id = EXYNOS4210_HSIC1, + .power_on = exynos4210_power_on, + .power_off = exynos4210_power_off, + }, +}; + +const struct samsung_usb2_phy_config exynos4210_usb2_phy_config = { + .has_mode_switch = 0, + .num_phys = EXYNOS4210_NUM_PHYS, + .phys = exynos4210_phys, + .rate_to_clk = exynos4210_rate_to_clk, +}; diff --git a/drivers/phy/samsung/phy-exynos4x12-usb2.c b/drivers/phy/samsung/phy-exynos4x12-usb2.c new file mode 100644 index 0000000000..b528a5d037 --- /dev/null +++ b/drivers/phy/samsung/phy-exynos4x12-usb2.c @@ -0,0 +1,375 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Samsung SoC USB 1.1/2.0 PHY driver - Exynos 4x12 support + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Author: Kamil Debski + */ + +#include +#include +#include +#include +#include "phy-samsung-usb2.h" + +/* Exynos USB PHY registers */ + +/* PHY power control */ +#define EXYNOS_4x12_UPHYPWR 0x0 + +#define EXYNOS_4x12_UPHYPWR_PHY0_SUSPEND BIT(0) +#define EXYNOS_4x12_UPHYPWR_PHY0_PWR BIT(3) +#define EXYNOS_4x12_UPHYPWR_PHY0_OTG_PWR BIT(4) +#define EXYNOS_4x12_UPHYPWR_PHY0_SLEEP BIT(5) +#define EXYNOS_4x12_UPHYPWR_PHY0 ( \ + EXYNOS_4x12_UPHYPWR_PHY0_SUSPEND | \ + EXYNOS_4x12_UPHYPWR_PHY0_PWR | \ + EXYNOS_4x12_UPHYPWR_PHY0_OTG_PWR | \ + EXYNOS_4x12_UPHYPWR_PHY0_SLEEP) + +#define EXYNOS_4x12_UPHYPWR_PHY1_SUSPEND BIT(6) +#define EXYNOS_4x12_UPHYPWR_PHY1_PWR BIT(7) +#define EXYNOS_4x12_UPHYPWR_PHY1_SLEEP BIT(8) +#define EXYNOS_4x12_UPHYPWR_PHY1 ( \ + EXYNOS_4x12_UPHYPWR_PHY1_SUSPEND | \ + EXYNOS_4x12_UPHYPWR_PHY1_PWR | \ + EXYNOS_4x12_UPHYPWR_PHY1_SLEEP) + +#define EXYNOS_4x12_UPHYPWR_HSIC0_SUSPEND BIT(9) +#define EXYNOS_4x12_UPHYPWR_HSIC0_PWR BIT(10) +#define EXYNOS_4x12_UPHYPWR_HSIC0_SLEEP BIT(11) +#define EXYNOS_4x12_UPHYPWR_HSIC0 ( \ + EXYNOS_4x12_UPHYPWR_HSIC0_SUSPEND | \ + EXYNOS_4x12_UPHYPWR_HSIC0_PWR | \ + EXYNOS_4x12_UPHYPWR_HSIC0_SLEEP) + +#define EXYNOS_4x12_UPHYPWR_HSIC1_SUSPEND BIT(12) +#define EXYNOS_4x12_UPHYPWR_HSIC1_PWR BIT(13) +#define EXYNOS_4x12_UPHYPWR_HSIC1_SLEEP BIT(14) +#define EXYNOS_4x12_UPHYPWR_HSIC1 ( \ + EXYNOS_4x12_UPHYPWR_HSIC1_SUSPEND | \ + EXYNOS_4x12_UPHYPWR_HSIC1_PWR | \ + EXYNOS_4x12_UPHYPWR_HSIC1_SLEEP) + +/* PHY clock control */ +#define EXYNOS_4x12_UPHYCLK 0x4 + +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_MASK (0x7 << 0) +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_OFFSET 0 +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_9MHZ6 (0x0 << 0) +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_10MHZ (0x1 << 0) +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_12MHZ (0x2 << 0) +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_19MHZ2 (0x3 << 0) +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_20MHZ (0x4 << 0) +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_24MHZ (0x5 << 0) +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_50MHZ (0x7 << 0) + +#define EXYNOS_3250_UPHYCLK_REFCLKSEL (0x2 << 8) + +#define EXYNOS_4x12_UPHYCLK_PHY0_ID_PULLUP BIT(3) +#define EXYNOS_4x12_UPHYCLK_PHY0_COMMON_ON BIT(4) +#define EXYNOS_4x12_UPHYCLK_PHY1_COMMON_ON BIT(7) + +#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_MASK (0x7f << 10) +#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_OFFSET 10 +#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_12MHZ (0x24 << 10) +#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_15MHZ (0x1c << 10) +#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_16MHZ (0x1a << 10) +#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_19MHZ2 (0x15 << 10) +#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_20MHZ (0x14 << 10) + +/* PHY reset control */ +#define EXYNOS_4x12_UPHYRST 0x8 + +#define EXYNOS_4x12_URSTCON_PHY0 BIT(0) +#define EXYNOS_4x12_URSTCON_OTG_HLINK BIT(1) +#define EXYNOS_4x12_URSTCON_OTG_PHYLINK BIT(2) +#define EXYNOS_4x12_URSTCON_HOST_PHY BIT(3) +/* The following bit defines are presented in the + * order taken from the Exynos4412 reference manual. + * + * During experiments with the hardware and debugging + * it was determined that the hardware behaves contrary + * to the manual. + * + * The following bit values were chaned accordingly to the + * results of real hardware experiments. + */ +#define EXYNOS_4x12_URSTCON_PHY1 BIT(4) +#define EXYNOS_4x12_URSTCON_HSIC0 BIT(6) +#define EXYNOS_4x12_URSTCON_HSIC1 BIT(5) +#define EXYNOS_4x12_URSTCON_HOST_LINK_ALL BIT(7) +#define EXYNOS_4x12_URSTCON_HOST_LINK_P0 BIT(10) +#define EXYNOS_4x12_URSTCON_HOST_LINK_P1 BIT(9) +#define EXYNOS_4x12_URSTCON_HOST_LINK_P2 BIT(8) + +/* Isolation, configured in the power management unit */ +#define EXYNOS_4x12_USB_ISOL_OFFSET 0x704 +#define EXYNOS_4x12_USB_ISOL_OTG BIT(0) +#define EXYNOS_4x12_USB_ISOL_HSIC0_OFFSET 0x708 +#define EXYNOS_4x12_USB_ISOL_HSIC0 BIT(0) +#define EXYNOS_4x12_USB_ISOL_HSIC1_OFFSET 0x70c +#define EXYNOS_4x12_USB_ISOL_HSIC1 BIT(0) + +/* Mode switching SUB Device <-> Host */ +#define EXYNOS_4x12_MODE_SWITCH_OFFSET 0x21c +#define EXYNOS_4x12_MODE_SWITCH_MASK 1 +#define EXYNOS_4x12_MODE_SWITCH_DEVICE 0 +#define EXYNOS_4x12_MODE_SWITCH_HOST 1 + +enum exynos4x12_phy_id { + EXYNOS4x12_DEVICE, + EXYNOS4x12_HOST, + EXYNOS4x12_HSIC0, + EXYNOS4x12_HSIC1, + EXYNOS4x12_NUM_PHYS, +}; + +/* + * exynos4x12_rate_to_clk() converts the supplied clock rate to the value that + * can be written to the phy register. + */ +static int exynos4x12_rate_to_clk(unsigned long rate, u32 *reg) +{ + /* EXYNOS_4x12_UPHYCLK_PHYFSEL_MASK */ + + switch (rate) { + case 9600 * KHZ: + *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_9MHZ6; + break; + case 10 * MHZ: + *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_10MHZ; + break; + case 12 * MHZ: + *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_12MHZ; + break; + case 19200 * KHZ: + *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_19MHZ2; + break; + case 20 * MHZ: + *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_20MHZ; + break; + case 24 * MHZ: + *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_24MHZ; + break; + case 50 * MHZ: + *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_50MHZ; + break; + default: + return -EINVAL; + } + + return 0; +} + +static void exynos4x12_isol(struct samsung_usb2_phy_instance *inst, bool on) +{ + struct samsung_usb2_phy_driver *drv = inst->drv; + u32 offset; + u32 mask; + + switch (inst->cfg->id) { + case EXYNOS4x12_DEVICE: + case EXYNOS4x12_HOST: + offset = EXYNOS_4x12_USB_ISOL_OFFSET; + mask = EXYNOS_4x12_USB_ISOL_OTG; + break; + case EXYNOS4x12_HSIC0: + offset = EXYNOS_4x12_USB_ISOL_HSIC0_OFFSET; + mask = EXYNOS_4x12_USB_ISOL_HSIC0; + break; + case EXYNOS4x12_HSIC1: + offset = EXYNOS_4x12_USB_ISOL_HSIC1_OFFSET; + mask = EXYNOS_4x12_USB_ISOL_HSIC1; + break; + default: + return; + } + + regmap_update_bits(drv->reg_pmu, offset, mask, on ? 0 : mask); +} + +static void exynos4x12_setup_clk(struct samsung_usb2_phy_instance *inst) +{ + struct samsung_usb2_phy_driver *drv = inst->drv; + u32 clk; + + clk = readl(drv->reg_phy + EXYNOS_4x12_UPHYCLK); + clk &= ~EXYNOS_4x12_UPHYCLK_PHYFSEL_MASK; + + if (drv->cfg->has_refclk_sel) + clk = EXYNOS_3250_UPHYCLK_REFCLKSEL; + + clk |= drv->ref_reg_val << EXYNOS_4x12_UPHYCLK_PHYFSEL_OFFSET; + clk |= EXYNOS_4x12_UPHYCLK_PHY1_COMMON_ON; + writel(clk, drv->reg_phy + EXYNOS_4x12_UPHYCLK); +} + +static void exynos4x12_phy_pwr(struct samsung_usb2_phy_instance *inst, bool on) +{ + struct samsung_usb2_phy_driver *drv = inst->drv; + u32 rstbits = 0; + u32 phypwr = 0; + u32 rst; + u32 pwr; + + switch (inst->cfg->id) { + case EXYNOS4x12_DEVICE: + phypwr = EXYNOS_4x12_UPHYPWR_PHY0; + rstbits = EXYNOS_4x12_URSTCON_PHY0; + break; + case EXYNOS4x12_HOST: + phypwr = EXYNOS_4x12_UPHYPWR_PHY1; + rstbits = EXYNOS_4x12_URSTCON_HOST_PHY | + EXYNOS_4x12_URSTCON_PHY1 | + EXYNOS_4x12_URSTCON_HOST_LINK_P0; + break; + case EXYNOS4x12_HSIC0: + phypwr = EXYNOS_4x12_UPHYPWR_HSIC0; + rstbits = EXYNOS_4x12_URSTCON_HSIC0 | + EXYNOS_4x12_URSTCON_HOST_LINK_P1; + break; + case EXYNOS4x12_HSIC1: + phypwr = EXYNOS_4x12_UPHYPWR_HSIC1; + rstbits = EXYNOS_4x12_URSTCON_HSIC1 | + EXYNOS_4x12_URSTCON_HOST_LINK_P1; + break; + } + + if (on) { + pwr = readl(drv->reg_phy + EXYNOS_4x12_UPHYPWR); + pwr &= ~phypwr; + writel(pwr, drv->reg_phy + EXYNOS_4x12_UPHYPWR); + + rst = readl(drv->reg_phy + EXYNOS_4x12_UPHYRST); + rst |= rstbits; + writel(rst, drv->reg_phy + EXYNOS_4x12_UPHYRST); + udelay(10); + rst &= ~rstbits; + writel(rst, drv->reg_phy + EXYNOS_4x12_UPHYRST); + /* The following delay is necessary for the reset sequence to be + * completed */ + udelay(80); + } else { + pwr = readl(drv->reg_phy + EXYNOS_4x12_UPHYPWR); + pwr |= phypwr; + writel(pwr, drv->reg_phy + EXYNOS_4x12_UPHYPWR); + } +} + +static void exynos4x12_power_on_int(struct samsung_usb2_phy_instance *inst) +{ + if (inst->int_cnt++ > 0) + return; + + exynos4x12_setup_clk(inst); + exynos4x12_isol(inst, 0); + exynos4x12_phy_pwr(inst, 1); +} + +static int exynos4x12_power_on(struct samsung_usb2_phy_instance *inst) +{ + struct samsung_usb2_phy_driver *drv = inst->drv; + + if (inst->ext_cnt++ > 0) + return 0; + + if (inst->cfg->id == EXYNOS4x12_HOST) { + regmap_update_bits(drv->reg_sys, EXYNOS_4x12_MODE_SWITCH_OFFSET, + EXYNOS_4x12_MODE_SWITCH_MASK, + EXYNOS_4x12_MODE_SWITCH_HOST); + exynos4x12_power_on_int(&drv->instances[EXYNOS4x12_DEVICE]); + } + + if (inst->cfg->id == EXYNOS4x12_DEVICE && drv->cfg->has_mode_switch) + regmap_update_bits(drv->reg_sys, EXYNOS_4x12_MODE_SWITCH_OFFSET, + EXYNOS_4x12_MODE_SWITCH_MASK, + EXYNOS_4x12_MODE_SWITCH_DEVICE); + + if (inst->cfg->id == EXYNOS4x12_HSIC0 || + inst->cfg->id == EXYNOS4x12_HSIC1) { + exynos4x12_power_on_int(&drv->instances[EXYNOS4x12_DEVICE]); + exynos4x12_power_on_int(&drv->instances[EXYNOS4x12_HOST]); + } + + exynos4x12_power_on_int(inst); + + return 0; +} + +static void exynos4x12_power_off_int(struct samsung_usb2_phy_instance *inst) +{ + if (inst->int_cnt-- > 1) + return; + + exynos4x12_isol(inst, 1); + exynos4x12_phy_pwr(inst, 0); +} + +static int exynos4x12_power_off(struct samsung_usb2_phy_instance *inst) +{ + struct samsung_usb2_phy_driver *drv = inst->drv; + + if (inst->ext_cnt-- > 1) + return 0; + + if (inst->cfg->id == EXYNOS4x12_DEVICE && drv->cfg->has_mode_switch) + regmap_update_bits(drv->reg_sys, EXYNOS_4x12_MODE_SWITCH_OFFSET, + EXYNOS_4x12_MODE_SWITCH_MASK, + EXYNOS_4x12_MODE_SWITCH_HOST); + + if (inst->cfg->id == EXYNOS4x12_HOST) + exynos4x12_power_off_int(&drv->instances[EXYNOS4x12_DEVICE]); + + if (inst->cfg->id == EXYNOS4x12_HSIC0 || + inst->cfg->id == EXYNOS4x12_HSIC1) { + exynos4x12_power_off_int(&drv->instances[EXYNOS4x12_DEVICE]); + exynos4x12_power_off_int(&drv->instances[EXYNOS4x12_HOST]); + } + + exynos4x12_power_off_int(inst); + + return 0; +} + + +static const struct samsung_usb2_common_phy exynos4x12_phys[] = { + { + .label = "device", + .id = EXYNOS4x12_DEVICE, + .power_on = exynos4x12_power_on, + .power_off = exynos4x12_power_off, + }, + { + .label = "host", + .id = EXYNOS4x12_HOST, + .power_on = exynos4x12_power_on, + .power_off = exynos4x12_power_off, + }, + { + .label = "hsic0", + .id = EXYNOS4x12_HSIC0, + .power_on = exynos4x12_power_on, + .power_off = exynos4x12_power_off, + }, + { + .label = "hsic1", + .id = EXYNOS4x12_HSIC1, + .power_on = exynos4x12_power_on, + .power_off = exynos4x12_power_off, + }, +}; + +const struct samsung_usb2_phy_config exynos3250_usb2_phy_config = { + .has_refclk_sel = 1, + .num_phys = 1, + .phys = exynos4x12_phys, + .rate_to_clk = exynos4x12_rate_to_clk, +}; + +const struct samsung_usb2_phy_config exynos4x12_usb2_phy_config = { + .has_mode_switch = 1, + .num_phys = EXYNOS4x12_NUM_PHYS, + .phys = exynos4x12_phys, + .rate_to_clk = exynos4x12_rate_to_clk, +}; diff --git a/drivers/phy/samsung/phy-exynos5-usbdrd.c b/drivers/phy/samsung/phy-exynos5-usbdrd.c new file mode 100644 index 0000000000..3f310b28bf --- /dev/null +++ b/drivers/phy/samsung/phy-exynos5-usbdrd.c @@ -0,0 +1,1125 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Samsung Exynos5 SoC series USB DRD PHY driver + * + * Phy provider for USB 3.0 DRD controller on Exynos5 SoC series + * + * Copyright (C) 2014 Samsung Electronics Co., Ltd. + * Author: Vivek Gautam + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Exynos USB PHY registers */ +#define EXYNOS5_FSEL_9MHZ6 0x0 +#define EXYNOS5_FSEL_10MHZ 0x1 +#define EXYNOS5_FSEL_12MHZ 0x2 +#define EXYNOS5_FSEL_19MHZ2 0x3 +#define EXYNOS5_FSEL_20MHZ 0x4 +#define EXYNOS5_FSEL_24MHZ 0x5 +#define EXYNOS5_FSEL_26MHZ 0x82 +#define EXYNOS5_FSEL_50MHZ 0x7 + +/* Exynos5: USB 3.0 DRD PHY registers */ +#define EXYNOS5_DRD_LINKSYSTEM 0x04 + +#define LINKSYSTEM_FLADJ_MASK (0x3f << 1) +#define LINKSYSTEM_FLADJ(_x) ((_x) << 1) +#define LINKSYSTEM_XHCI_VERSION_CONTROL BIT(27) + +#define EXYNOS5_DRD_PHYUTMI 0x08 + +#define PHYUTMI_OTGDISABLE BIT(6) +#define PHYUTMI_FORCESUSPEND BIT(1) +#define PHYUTMI_FORCESLEEP BIT(0) + +#define EXYNOS5_DRD_PHYPIPE 0x0c + +#define EXYNOS5_DRD_PHYCLKRST 0x10 + +#define PHYCLKRST_EN_UTMISUSPEND BIT(31) + +#define PHYCLKRST_SSC_REFCLKSEL_MASK (0xff << 23) +#define PHYCLKRST_SSC_REFCLKSEL(_x) ((_x) << 23) + +#define PHYCLKRST_SSC_RANGE_MASK (0x03 << 21) +#define PHYCLKRST_SSC_RANGE(_x) ((_x) << 21) + +#define PHYCLKRST_SSC_EN BIT(20) +#define PHYCLKRST_REF_SSP_EN BIT(19) +#define PHYCLKRST_REF_CLKDIV2 BIT(18) + +#define PHYCLKRST_MPLL_MULTIPLIER_MASK (0x7f << 11) +#define PHYCLKRST_MPLL_MULTIPLIER_100MHZ_REF (0x19 << 11) +#define PHYCLKRST_MPLL_MULTIPLIER_50M_REF (0x32 << 11) +#define PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF (0x68 << 11) +#define PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF (0x7d << 11) +#define PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF (0x02 << 11) + +#define PHYCLKRST_FSEL_UTMI_MASK (0x7 << 5) +#define PHYCLKRST_FSEL_PIPE_MASK (0x7 << 8) +#define PHYCLKRST_FSEL(_x) ((_x) << 5) +#define PHYCLKRST_FSEL_PAD_100MHZ (0x27 << 5) +#define PHYCLKRST_FSEL_PAD_24MHZ (0x2a << 5) +#define PHYCLKRST_FSEL_PAD_20MHZ (0x31 << 5) +#define PHYCLKRST_FSEL_PAD_19_2MHZ (0x38 << 5) + +#define PHYCLKRST_RETENABLEN BIT(4) + +#define PHYCLKRST_REFCLKSEL_MASK (0x03 << 2) +#define PHYCLKRST_REFCLKSEL_PAD_REFCLK (0x2 << 2) +#define PHYCLKRST_REFCLKSEL_EXT_REFCLK (0x3 << 2) + +#define PHYCLKRST_PORTRESET BIT(1) +#define PHYCLKRST_COMMONONN BIT(0) + +#define EXYNOS5_DRD_PHYREG0 0x14 +#define PHYREG0_SSC_REF_CLK_SEL BIT(21) +#define PHYREG0_SSC_RANGE BIT(20) +#define PHYREG0_CR_WRITE BIT(19) +#define PHYREG0_CR_READ BIT(18) +#define PHYREG0_CR_DATA_IN(_x) ((_x) << 2) +#define PHYREG0_CR_CAP_DATA BIT(1) +#define PHYREG0_CR_CAP_ADDR BIT(0) + +#define EXYNOS5_DRD_PHYREG1 0x18 +#define PHYREG1_CR_DATA_OUT(_x) ((_x) << 1) +#define PHYREG1_CR_ACK BIT(0) + +#define EXYNOS5_DRD_PHYPARAM0 0x1c + +#define PHYPARAM0_REF_USE_PAD BIT(31) +#define PHYPARAM0_REF_LOSLEVEL_MASK (0x1f << 26) +#define PHYPARAM0_REF_LOSLEVEL (0x9 << 26) + +#define EXYNOS5_DRD_PHYPARAM1 0x20 + +#define PHYPARAM1_PCS_TXDEEMPH_MASK (0x1f << 0) +#define PHYPARAM1_PCS_TXDEEMPH (0x1c) + +#define EXYNOS5_DRD_PHYTERM 0x24 + +#define EXYNOS5_DRD_PHYTEST 0x28 + +#define PHYTEST_POWERDOWN_SSP BIT(3) +#define PHYTEST_POWERDOWN_HSP BIT(2) + +#define EXYNOS5_DRD_PHYADP 0x2c + +#define EXYNOS5_DRD_PHYUTMICLKSEL 0x30 + +#define PHYUTMICLKSEL_UTMI_CLKSEL BIT(2) + +#define EXYNOS5_DRD_PHYRESUME 0x34 +#define EXYNOS5_DRD_LINKPORT 0x44 + +/* USB 3.0 DRD PHY SS Function Control Reg; accessed by CR_PORT */ +#define EXYNOS5_DRD_PHYSS_LOSLEVEL_OVRD_IN (0x15) +#define LOSLEVEL_OVRD_IN_LOS_BIAS_5420 (0x5 << 13) +#define LOSLEVEL_OVRD_IN_LOS_BIAS_DEFAULT (0x0 << 13) +#define LOSLEVEL_OVRD_IN_EN (0x1 << 10) +#define LOSLEVEL_OVRD_IN_LOS_LEVEL_DEFAULT (0x9 << 0) + +#define EXYNOS5_DRD_PHYSS_TX_VBOOSTLEVEL_OVRD_IN (0x12) +#define TX_VBOOSTLEVEL_OVRD_IN_VBOOST_5420 (0x5 << 13) +#define TX_VBOOSTLEVEL_OVRD_IN_VBOOST_DEFAULT (0x4 << 13) + +#define EXYNOS5_DRD_PHYSS_LANE0_TX_DEBUG (0x1010) +#define LANE0_TX_DEBUG_RXDET_MEAS_TIME_19M2_20M (0x4 << 4) +#define LANE0_TX_DEBUG_RXDET_MEAS_TIME_24M (0x8 << 4) +#define LANE0_TX_DEBUG_RXDET_MEAS_TIME_25M_26M (0x8 << 4) +#define LANE0_TX_DEBUG_RXDET_MEAS_TIME_48M_50M_52M (0x20 << 4) +#define LANE0_TX_DEBUG_RXDET_MEAS_TIME_62M5 (0x20 << 4) +#define LANE0_TX_DEBUG_RXDET_MEAS_TIME_96M_100M (0x40 << 4) + +/* Exynos850: USB DRD PHY registers */ +#define EXYNOS850_DRD_LINKCTRL 0x04 +#define LINKCTRL_BUS_FILTER_BYPASS(_x) ((_x) << 4) +#define LINKCTRL_FORCE_QACT BIT(8) + +#define EXYNOS850_DRD_CLKRST 0x20 +#define CLKRST_LINK_SW_RST BIT(0) +#define CLKRST_PORT_RST BIT(1) +#define CLKRST_PHY_SW_RST BIT(3) + +#define EXYNOS850_DRD_UTMI 0x50 +#define UTMI_FORCE_SLEEP BIT(0) +#define UTMI_FORCE_SUSPEND BIT(1) +#define UTMI_DM_PULLDOWN BIT(2) +#define UTMI_DP_PULLDOWN BIT(3) +#define UTMI_FORCE_BVALID BIT(4) +#define UTMI_FORCE_VBUSVALID BIT(5) + +#define EXYNOS850_DRD_HSP 0x54 +#define HSP_COMMONONN BIT(8) +#define HSP_EN_UTMISUSPEND BIT(9) +#define HSP_VBUSVLDEXT BIT(12) +#define HSP_VBUSVLDEXTSEL BIT(13) +#define HSP_FSV_OUT_EN BIT(24) + +#define EXYNOS850_DRD_HSP_TEST 0x5c +#define HSP_TEST_SIDDQ BIT(24) + +#define KHZ 1000 +#define MHZ (KHZ * KHZ) + +enum exynos5_usbdrd_phy_id { + EXYNOS5_DRDPHY_UTMI, + EXYNOS5_DRDPHY_PIPE3, + EXYNOS5_DRDPHYS_NUM, +}; + +struct phy_usb_instance; +struct exynos5_usbdrd_phy; + +struct exynos5_usbdrd_phy_config { + u32 id; + void (*phy_isol)(struct phy_usb_instance *inst, u32 on); + void (*phy_init)(struct exynos5_usbdrd_phy *phy_drd); + unsigned int (*set_refclk)(struct phy_usb_instance *inst); +}; + +struct exynos5_usbdrd_phy_drvdata { + const struct exynos5_usbdrd_phy_config *phy_cfg; + const struct phy_ops *phy_ops; + u32 pmu_offset_usbdrd0_phy; + u32 pmu_offset_usbdrd1_phy; + bool has_common_clk_gate; +}; + +/** + * struct exynos5_usbdrd_phy - driver data for USB 3.0 PHY + * @dev: pointer to device instance of this platform device + * @reg_phy: usb phy controller register memory base + * @clk: phy clock for register access + * @pipeclk: clock for pipe3 phy + * @utmiclk: clock for utmi+ phy + * @itpclk: clock for ITP generation + * @drv_data: pointer to SoC level driver data structure + * @phys: array for 'EXYNOS5_DRDPHYS_NUM' number of PHY + * instances each with its 'phy' and 'phy_cfg'. + * @extrefclk: frequency select settings when using 'separate + * reference clocks' for SS and HS operations + * @ref_clk: reference clock to PHY block from which PHY's + * operational clocks are derived + * @vbus: VBUS regulator for phy + * @vbus_boost: Boost regulator for VBUS present on few Exynos boards + */ +struct exynos5_usbdrd_phy { + struct device *dev; + void __iomem *reg_phy; + struct clk *clk; + struct clk *pipeclk; + struct clk *utmiclk; + struct clk *itpclk; + const struct exynos5_usbdrd_phy_drvdata *drv_data; + struct phy_usb_instance { + struct phy *phy; + u32 index; + struct regmap *reg_pmu; + u32 pmu_offset; + const struct exynos5_usbdrd_phy_config *phy_cfg; + } phys[EXYNOS5_DRDPHYS_NUM]; + u32 extrefclk; + struct clk *ref_clk; + struct regulator *vbus; + struct regulator *vbus_boost; +}; + +static inline +struct exynos5_usbdrd_phy *to_usbdrd_phy(struct phy_usb_instance *inst) +{ + return container_of((inst), struct exynos5_usbdrd_phy, + phys[(inst)->index]); +} + +/* + * exynos5_rate_to_clk() converts the supplied clock rate to the value that + * can be written to the phy register. + */ +static unsigned int exynos5_rate_to_clk(unsigned long rate, u32 *reg) +{ + /* EXYNOS5_FSEL_MASK */ + + switch (rate) { + case 9600 * KHZ: + *reg = EXYNOS5_FSEL_9MHZ6; + break; + case 10 * MHZ: + *reg = EXYNOS5_FSEL_10MHZ; + break; + case 12 * MHZ: + *reg = EXYNOS5_FSEL_12MHZ; + break; + case 19200 * KHZ: + *reg = EXYNOS5_FSEL_19MHZ2; + break; + case 20 * MHZ: + *reg = EXYNOS5_FSEL_20MHZ; + break; + case 24 * MHZ: + *reg = EXYNOS5_FSEL_24MHZ; + break; + case 26 * MHZ: + *reg = EXYNOS5_FSEL_26MHZ; + break; + case 50 * MHZ: + *reg = EXYNOS5_FSEL_50MHZ; + break; + default: + return -EINVAL; + } + + return 0; +} + +static void exynos5_usbdrd_phy_isol(struct phy_usb_instance *inst, + unsigned int on) +{ + unsigned int val; + + if (!inst->reg_pmu) + return; + + val = on ? 0 : EXYNOS4_PHY_ENABLE; + + regmap_update_bits(inst->reg_pmu, inst->pmu_offset, + EXYNOS4_PHY_ENABLE, val); +} + +/* + * Sets the pipe3 phy's clk as EXTREFCLK (XXTI) which is internal clock + * from clock core. Further sets multiplier values and spread spectrum + * clock settings for SuperSpeed operations. + */ +static unsigned int +exynos5_usbdrd_pipe3_set_refclk(struct phy_usb_instance *inst) +{ + u32 reg; + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + + /* restore any previous reference clock settings */ + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST); + + /* Use EXTREFCLK as ref clock */ + reg &= ~PHYCLKRST_REFCLKSEL_MASK; + reg |= PHYCLKRST_REFCLKSEL_EXT_REFCLK; + + /* FSEL settings corresponding to reference clock */ + reg &= ~PHYCLKRST_FSEL_PIPE_MASK | + PHYCLKRST_MPLL_MULTIPLIER_MASK | + PHYCLKRST_SSC_REFCLKSEL_MASK; + switch (phy_drd->extrefclk) { + case EXYNOS5_FSEL_50MHZ: + reg |= (PHYCLKRST_MPLL_MULTIPLIER_50M_REF | + PHYCLKRST_SSC_REFCLKSEL(0x00)); + break; + case EXYNOS5_FSEL_24MHZ: + reg |= (PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF | + PHYCLKRST_SSC_REFCLKSEL(0x88)); + break; + case EXYNOS5_FSEL_20MHZ: + reg |= (PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF | + PHYCLKRST_SSC_REFCLKSEL(0x00)); + break; + case EXYNOS5_FSEL_19MHZ2: + reg |= (PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF | + PHYCLKRST_SSC_REFCLKSEL(0x88)); + break; + default: + dev_dbg(phy_drd->dev, "unsupported ref clk\n"); + break; + } + + return reg; +} + +/* + * Sets the utmi phy's clk as EXTREFCLK (XXTI) which is internal clock + * from clock core. Further sets the FSEL values for HighSpeed operations. + */ +static unsigned int +exynos5_usbdrd_utmi_set_refclk(struct phy_usb_instance *inst) +{ + u32 reg; + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + + /* restore any previous reference clock settings */ + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST); + + reg &= ~PHYCLKRST_REFCLKSEL_MASK; + reg |= PHYCLKRST_REFCLKSEL_EXT_REFCLK; + + reg &= ~PHYCLKRST_FSEL_UTMI_MASK | + PHYCLKRST_MPLL_MULTIPLIER_MASK | + PHYCLKRST_SSC_REFCLKSEL_MASK; + reg |= PHYCLKRST_FSEL(phy_drd->extrefclk); + + return reg; +} + +static void exynos5_usbdrd_pipe3_init(struct exynos5_usbdrd_phy *phy_drd) +{ + u32 reg; + + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM1); + /* Set Tx De-Emphasis level */ + reg &= ~PHYPARAM1_PCS_TXDEEMPH_MASK; + reg |= PHYPARAM1_PCS_TXDEEMPH; + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM1); + + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST); + reg &= ~PHYTEST_POWERDOWN_SSP; + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST); +} + +static void exynos5_usbdrd_utmi_init(struct exynos5_usbdrd_phy *phy_drd) +{ + u32 reg; + + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM0); + /* Set Loss-of-Signal Detector sensitivity */ + reg &= ~PHYPARAM0_REF_LOSLEVEL_MASK; + reg |= PHYPARAM0_REF_LOSLEVEL; + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM0); + + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM1); + /* Set Tx De-Emphasis level */ + reg &= ~PHYPARAM1_PCS_TXDEEMPH_MASK; + reg |= PHYPARAM1_PCS_TXDEEMPH; + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM1); + + /* UTMI Power Control */ + writel(PHYUTMI_OTGDISABLE, phy_drd->reg_phy + EXYNOS5_DRD_PHYUTMI); + + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST); + reg &= ~PHYTEST_POWERDOWN_HSP; + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST); +} + +static int exynos5_usbdrd_phy_init(struct phy *phy) +{ + int ret; + u32 reg; + struct phy_usb_instance *inst = phy_get_drvdata(phy); + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + + ret = clk_prepare_enable(phy_drd->clk); + if (ret) + return ret; + + /* Reset USB 3.0 PHY */ + writel(0x0, phy_drd->reg_phy + EXYNOS5_DRD_PHYREG0); + writel(0x0, phy_drd->reg_phy + EXYNOS5_DRD_PHYRESUME); + + /* + * Setting the Frame length Adj value[6:1] to default 0x20 + * See xHCI 1.0 spec, 5.2.4 + */ + reg = LINKSYSTEM_XHCI_VERSION_CONTROL | + LINKSYSTEM_FLADJ(0x20); + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_LINKSYSTEM); + + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM0); + /* Select PHY CLK source */ + reg &= ~PHYPARAM0_REF_USE_PAD; + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM0); + + /* This bit must be set for both HS and SS operations */ + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYUTMICLKSEL); + reg |= PHYUTMICLKSEL_UTMI_CLKSEL; + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYUTMICLKSEL); + + /* UTMI or PIPE3 specific init */ + inst->phy_cfg->phy_init(phy_drd); + + /* reference clock settings */ + reg = inst->phy_cfg->set_refclk(inst); + + /* Digital power supply in normal operating mode */ + reg |= PHYCLKRST_RETENABLEN | + /* Enable ref clock for SS function */ + PHYCLKRST_REF_SSP_EN | + /* Enable spread spectrum */ + PHYCLKRST_SSC_EN | + /* Power down HS Bias and PLL blocks in suspend mode */ + PHYCLKRST_COMMONONN | + /* Reset the port */ + PHYCLKRST_PORTRESET; + + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST); + + udelay(10); + + reg &= ~PHYCLKRST_PORTRESET; + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST); + + clk_disable_unprepare(phy_drd->clk); + + return 0; +} + +static int exynos5_usbdrd_phy_exit(struct phy *phy) +{ + int ret; + u32 reg; + struct phy_usb_instance *inst = phy_get_drvdata(phy); + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + + ret = clk_prepare_enable(phy_drd->clk); + if (ret) + return ret; + + reg = PHYUTMI_OTGDISABLE | + PHYUTMI_FORCESUSPEND | + PHYUTMI_FORCESLEEP; + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYUTMI); + + /* Resetting the PHYCLKRST enable bits to reduce leakage current */ + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST); + reg &= ~(PHYCLKRST_REF_SSP_EN | + PHYCLKRST_SSC_EN | + PHYCLKRST_COMMONONN); + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST); + + /* Control PHYTEST to remove leakage current */ + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST); + reg |= PHYTEST_POWERDOWN_SSP | + PHYTEST_POWERDOWN_HSP; + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST); + + clk_disable_unprepare(phy_drd->clk); + + return 0; +} + +static int exynos5_usbdrd_phy_power_on(struct phy *phy) +{ + int ret; + struct phy_usb_instance *inst = phy_get_drvdata(phy); + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + + dev_dbg(phy_drd->dev, "Request to power_on usbdrd_phy phy\n"); + + clk_prepare_enable(phy_drd->ref_clk); + if (!phy_drd->drv_data->has_common_clk_gate) { + clk_prepare_enable(phy_drd->pipeclk); + clk_prepare_enable(phy_drd->utmiclk); + clk_prepare_enable(phy_drd->itpclk); + } + + /* Enable VBUS supply */ + if (phy_drd->vbus_boost) { + ret = regulator_enable(phy_drd->vbus_boost); + if (ret) { + dev_err(phy_drd->dev, + "Failed to enable VBUS boost supply\n"); + goto fail_vbus; + } + } + + if (phy_drd->vbus) { + ret = regulator_enable(phy_drd->vbus); + if (ret) { + dev_err(phy_drd->dev, "Failed to enable VBUS supply\n"); + goto fail_vbus_boost; + } + } + + /* Power-on PHY*/ + inst->phy_cfg->phy_isol(inst, 0); + + return 0; + +fail_vbus_boost: + if (phy_drd->vbus_boost) + regulator_disable(phy_drd->vbus_boost); + +fail_vbus: + clk_disable_unprepare(phy_drd->ref_clk); + if (!phy_drd->drv_data->has_common_clk_gate) { + clk_disable_unprepare(phy_drd->itpclk); + clk_disable_unprepare(phy_drd->utmiclk); + clk_disable_unprepare(phy_drd->pipeclk); + } + + return ret; +} + +static int exynos5_usbdrd_phy_power_off(struct phy *phy) +{ + struct phy_usb_instance *inst = phy_get_drvdata(phy); + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + + dev_dbg(phy_drd->dev, "Request to power_off usbdrd_phy phy\n"); + + /* Power-off the PHY */ + inst->phy_cfg->phy_isol(inst, 1); + + /* Disable VBUS supply */ + if (phy_drd->vbus) + regulator_disable(phy_drd->vbus); + if (phy_drd->vbus_boost) + regulator_disable(phy_drd->vbus_boost); + + clk_disable_unprepare(phy_drd->ref_clk); + if (!phy_drd->drv_data->has_common_clk_gate) { + clk_disable_unprepare(phy_drd->itpclk); + clk_disable_unprepare(phy_drd->pipeclk); + clk_disable_unprepare(phy_drd->utmiclk); + } + + return 0; +} + +static int crport_handshake(struct exynos5_usbdrd_phy *phy_drd, + u32 val, u32 cmd) +{ + unsigned int result; + int err; + + writel(val | cmd, phy_drd->reg_phy + EXYNOS5_DRD_PHYREG0); + + err = readl_poll_timeout(phy_drd->reg_phy + EXYNOS5_DRD_PHYREG1, + result, (result & PHYREG1_CR_ACK), 1, 100); + if (err == -ETIMEDOUT) { + dev_err(phy_drd->dev, "CRPORT handshake timeout1 (0x%08x)\n", val); + return err; + } + + writel(val, phy_drd->reg_phy + EXYNOS5_DRD_PHYREG0); + + err = readl_poll_timeout(phy_drd->reg_phy + EXYNOS5_DRD_PHYREG1, + result, !(result & PHYREG1_CR_ACK), 1, 100); + if (err == -ETIMEDOUT) { + dev_err(phy_drd->dev, "CRPORT handshake timeout2 (0x%08x)\n", val); + return err; + } + + return 0; +} + +static int crport_ctrl_write(struct exynos5_usbdrd_phy *phy_drd, + u32 addr, u32 data) +{ + int ret; + + /* Write Address */ + writel(PHYREG0_CR_DATA_IN(addr), + phy_drd->reg_phy + EXYNOS5_DRD_PHYREG0); + ret = crport_handshake(phy_drd, PHYREG0_CR_DATA_IN(addr), + PHYREG0_CR_CAP_ADDR); + if (ret) + return ret; + + /* Write Data */ + writel(PHYREG0_CR_DATA_IN(data), + phy_drd->reg_phy + EXYNOS5_DRD_PHYREG0); + ret = crport_handshake(phy_drd, PHYREG0_CR_DATA_IN(data), + PHYREG0_CR_CAP_DATA); + if (ret) + return ret; + + ret = crport_handshake(phy_drd, PHYREG0_CR_DATA_IN(data), + PHYREG0_CR_WRITE); + + return ret; +} + +/* + * Calibrate few PHY parameters using CR_PORT register to meet + * SuperSpeed requirements on Exynos5420 and Exynos5800 systems, + * which have 28nm USB 3.0 DRD PHY. + */ +static int exynos5420_usbdrd_phy_calibrate(struct exynos5_usbdrd_phy *phy_drd) +{ + unsigned int temp; + int ret = 0; + + /* + * Change los_bias to (0x5) for 28nm PHY from a + * default value (0x0); los_level is set as default + * (0x9) as also reflected in los_level[30:26] bits + * of PHYPARAM0 register. + */ + temp = LOSLEVEL_OVRD_IN_LOS_BIAS_5420 | + LOSLEVEL_OVRD_IN_EN | + LOSLEVEL_OVRD_IN_LOS_LEVEL_DEFAULT; + ret = crport_ctrl_write(phy_drd, + EXYNOS5_DRD_PHYSS_LOSLEVEL_OVRD_IN, + temp); + if (ret) { + dev_err(phy_drd->dev, + "Failed setting Loss-of-Signal level for SuperSpeed\n"); + return ret; + } + + /* + * Set tx_vboost_lvl to (0x5) for 28nm PHY Tuning, + * to raise Tx signal level from its default value of (0x4) + */ + temp = TX_VBOOSTLEVEL_OVRD_IN_VBOOST_5420; + ret = crport_ctrl_write(phy_drd, + EXYNOS5_DRD_PHYSS_TX_VBOOSTLEVEL_OVRD_IN, + temp); + if (ret) { + dev_err(phy_drd->dev, + "Failed setting Tx-Vboost-Level for SuperSpeed\n"); + return ret; + } + + /* + * Set proper time to wait for RxDetect measurement, for + * desired reference clock of PHY, by tuning the CR_PORT + * register LANE0.TX_DEBUG which is internal to PHY. + * This fixes issue with few USB 3.0 devices, which are + * not detected (not even generate interrupts on the bus + * on insertion) without this change. + * e.g. Samsung SUM-TSB16S 3.0 USB drive. + */ + switch (phy_drd->extrefclk) { + case EXYNOS5_FSEL_50MHZ: + temp = LANE0_TX_DEBUG_RXDET_MEAS_TIME_48M_50M_52M; + break; + case EXYNOS5_FSEL_20MHZ: + case EXYNOS5_FSEL_19MHZ2: + temp = LANE0_TX_DEBUG_RXDET_MEAS_TIME_19M2_20M; + break; + case EXYNOS5_FSEL_24MHZ: + default: + temp = LANE0_TX_DEBUG_RXDET_MEAS_TIME_24M; + break; + } + + ret = crport_ctrl_write(phy_drd, + EXYNOS5_DRD_PHYSS_LANE0_TX_DEBUG, + temp); + if (ret) + dev_err(phy_drd->dev, + "Fail to set RxDet measurement time for SuperSpeed\n"); + + return ret; +} + +static struct phy *exynos5_usbdrd_phy_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct exynos5_usbdrd_phy *phy_drd = dev_get_drvdata(dev); + + if (WARN_ON(args->args[0] >= EXYNOS5_DRDPHYS_NUM)) + return ERR_PTR(-ENODEV); + + return phy_drd->phys[args->args[0]].phy; +} + +static int exynos5_usbdrd_phy_calibrate(struct phy *phy) +{ + struct phy_usb_instance *inst = phy_get_drvdata(phy); + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + + if (inst->phy_cfg->id == EXYNOS5_DRDPHY_UTMI) + return exynos5420_usbdrd_phy_calibrate(phy_drd); + return 0; +} + +static const struct phy_ops exynos5_usbdrd_phy_ops = { + .init = exynos5_usbdrd_phy_init, + .exit = exynos5_usbdrd_phy_exit, + .power_on = exynos5_usbdrd_phy_power_on, + .power_off = exynos5_usbdrd_phy_power_off, + .calibrate = exynos5_usbdrd_phy_calibrate, + .owner = THIS_MODULE, +}; + +static void exynos850_usbdrd_utmi_init(struct exynos5_usbdrd_phy *phy_drd) +{ + void __iomem *regs_base = phy_drd->reg_phy; + u32 reg; + + /* + * Disable HWACG (hardware auto clock gating control). This will force + * QACTIVE signal in Q-Channel interface to HIGH level, to make sure + * the PHY clock is not gated by the hardware. + */ + reg = readl(regs_base + EXYNOS850_DRD_LINKCTRL); + reg |= LINKCTRL_FORCE_QACT; + writel(reg, regs_base + EXYNOS850_DRD_LINKCTRL); + + /* Start PHY Reset (POR=high) */ + reg = readl(regs_base + EXYNOS850_DRD_CLKRST); + reg |= CLKRST_PHY_SW_RST; + writel(reg, regs_base + EXYNOS850_DRD_CLKRST); + + /* Enable UTMI+ */ + reg = readl(regs_base + EXYNOS850_DRD_UTMI); + reg &= ~(UTMI_FORCE_SUSPEND | UTMI_FORCE_SLEEP | UTMI_DP_PULLDOWN | + UTMI_DM_PULLDOWN); + writel(reg, regs_base + EXYNOS850_DRD_UTMI); + + /* Set PHY clock and control HS PHY */ + reg = readl(regs_base + EXYNOS850_DRD_HSP); + reg |= HSP_EN_UTMISUSPEND | HSP_COMMONONN; + writel(reg, regs_base + EXYNOS850_DRD_HSP); + + /* Set VBUS Valid and D+ pull-up control by VBUS pad usage */ + reg = readl(regs_base + EXYNOS850_DRD_LINKCTRL); + reg |= LINKCTRL_BUS_FILTER_BYPASS(0xf); + writel(reg, regs_base + EXYNOS850_DRD_LINKCTRL); + + reg = readl(regs_base + EXYNOS850_DRD_UTMI); + reg |= UTMI_FORCE_BVALID | UTMI_FORCE_VBUSVALID; + writel(reg, regs_base + EXYNOS850_DRD_UTMI); + + reg = readl(regs_base + EXYNOS850_DRD_HSP); + reg |= HSP_VBUSVLDEXT | HSP_VBUSVLDEXTSEL; + writel(reg, regs_base + EXYNOS850_DRD_HSP); + + /* Power up PHY analog blocks */ + reg = readl(regs_base + EXYNOS850_DRD_HSP_TEST); + reg &= ~HSP_TEST_SIDDQ; + writel(reg, regs_base + EXYNOS850_DRD_HSP_TEST); + + /* Finish PHY reset (POR=low) */ + udelay(10); /* required before doing POR=low */ + reg = readl(regs_base + EXYNOS850_DRD_CLKRST); + reg &= ~(CLKRST_PHY_SW_RST | CLKRST_PORT_RST); + writel(reg, regs_base + EXYNOS850_DRD_CLKRST); + udelay(75); /* required after POR=low for guaranteed PHY clock */ + + /* Disable single ended signal out */ + reg = readl(regs_base + EXYNOS850_DRD_HSP); + reg &= ~HSP_FSV_OUT_EN; + writel(reg, regs_base + EXYNOS850_DRD_HSP); +} + +static int exynos850_usbdrd_phy_init(struct phy *phy) +{ + struct phy_usb_instance *inst = phy_get_drvdata(phy); + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + int ret; + + ret = clk_prepare_enable(phy_drd->clk); + if (ret) + return ret; + + /* UTMI or PIPE3 specific init */ + inst->phy_cfg->phy_init(phy_drd); + + clk_disable_unprepare(phy_drd->clk); + + return 0; +} + +static int exynos850_usbdrd_phy_exit(struct phy *phy) +{ + struct phy_usb_instance *inst = phy_get_drvdata(phy); + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + void __iomem *regs_base = phy_drd->reg_phy; + u32 reg; + int ret; + + ret = clk_prepare_enable(phy_drd->clk); + if (ret) + return ret; + + /* Set PHY clock and control HS PHY */ + reg = readl(regs_base + EXYNOS850_DRD_UTMI); + reg &= ~(UTMI_DP_PULLDOWN | UTMI_DM_PULLDOWN); + reg |= UTMI_FORCE_SUSPEND | UTMI_FORCE_SLEEP; + writel(reg, regs_base + EXYNOS850_DRD_UTMI); + + /* Power down PHY analog blocks */ + reg = readl(regs_base + EXYNOS850_DRD_HSP_TEST); + reg |= HSP_TEST_SIDDQ; + writel(reg, regs_base + EXYNOS850_DRD_HSP_TEST); + + /* Link reset */ + reg = readl(regs_base + EXYNOS850_DRD_CLKRST); + reg |= CLKRST_LINK_SW_RST; + writel(reg, regs_base + EXYNOS850_DRD_CLKRST); + udelay(10); /* required before doing POR=low */ + reg &= ~CLKRST_LINK_SW_RST; + writel(reg, regs_base + EXYNOS850_DRD_CLKRST); + + clk_disable_unprepare(phy_drd->clk); + + return 0; +} + +static const struct phy_ops exynos850_usbdrd_phy_ops = { + .init = exynos850_usbdrd_phy_init, + .exit = exynos850_usbdrd_phy_exit, + .power_on = exynos5_usbdrd_phy_power_on, + .power_off = exynos5_usbdrd_phy_power_off, + .owner = THIS_MODULE, +}; + +static int exynos5_usbdrd_phy_clk_handle(struct exynos5_usbdrd_phy *phy_drd) +{ + unsigned long ref_rate; + int ret; + + phy_drd->clk = devm_clk_get(phy_drd->dev, "phy"); + if (IS_ERR(phy_drd->clk)) { + dev_err(phy_drd->dev, "Failed to get phy clock\n"); + return PTR_ERR(phy_drd->clk); + } + + phy_drd->ref_clk = devm_clk_get(phy_drd->dev, "ref"); + if (IS_ERR(phy_drd->ref_clk)) { + dev_err(phy_drd->dev, "Failed to get phy reference clock\n"); + return PTR_ERR(phy_drd->ref_clk); + } + ref_rate = clk_get_rate(phy_drd->ref_clk); + + ret = exynos5_rate_to_clk(ref_rate, &phy_drd->extrefclk); + if (ret) { + dev_err(phy_drd->dev, "Clock rate (%ld) not supported\n", + ref_rate); + return ret; + } + + if (!phy_drd->drv_data->has_common_clk_gate) { + phy_drd->pipeclk = devm_clk_get(phy_drd->dev, "phy_pipe"); + if (IS_ERR(phy_drd->pipeclk)) { + dev_info(phy_drd->dev, + "PIPE3 phy operational clock not specified\n"); + phy_drd->pipeclk = NULL; + } + + phy_drd->utmiclk = devm_clk_get(phy_drd->dev, "phy_utmi"); + if (IS_ERR(phy_drd->utmiclk)) { + dev_info(phy_drd->dev, + "UTMI phy operational clock not specified\n"); + phy_drd->utmiclk = NULL; + } + + phy_drd->itpclk = devm_clk_get(phy_drd->dev, "itp"); + if (IS_ERR(phy_drd->itpclk)) { + dev_info(phy_drd->dev, + "ITP clock from main OSC not specified\n"); + phy_drd->itpclk = NULL; + } + } + + return 0; +} + +static const struct exynos5_usbdrd_phy_config phy_cfg_exynos5[] = { + { + .id = EXYNOS5_DRDPHY_UTMI, + .phy_isol = exynos5_usbdrd_phy_isol, + .phy_init = exynos5_usbdrd_utmi_init, + .set_refclk = exynos5_usbdrd_utmi_set_refclk, + }, + { + .id = EXYNOS5_DRDPHY_PIPE3, + .phy_isol = exynos5_usbdrd_phy_isol, + .phy_init = exynos5_usbdrd_pipe3_init, + .set_refclk = exynos5_usbdrd_pipe3_set_refclk, + }, +}; + +static const struct exynos5_usbdrd_phy_config phy_cfg_exynos850[] = { + { + .id = EXYNOS5_DRDPHY_UTMI, + .phy_isol = exynos5_usbdrd_phy_isol, + .phy_init = exynos850_usbdrd_utmi_init, + }, +}; + +static const struct exynos5_usbdrd_phy_drvdata exynos5420_usbdrd_phy = { + .phy_cfg = phy_cfg_exynos5, + .phy_ops = &exynos5_usbdrd_phy_ops, + .pmu_offset_usbdrd0_phy = EXYNOS5_USBDRD_PHY_CONTROL, + .pmu_offset_usbdrd1_phy = EXYNOS5420_USBDRD1_PHY_CONTROL, + .has_common_clk_gate = true, +}; + +static const struct exynos5_usbdrd_phy_drvdata exynos5250_usbdrd_phy = { + .phy_cfg = phy_cfg_exynos5, + .phy_ops = &exynos5_usbdrd_phy_ops, + .pmu_offset_usbdrd0_phy = EXYNOS5_USBDRD_PHY_CONTROL, + .has_common_clk_gate = true, +}; + +static const struct exynos5_usbdrd_phy_drvdata exynos5433_usbdrd_phy = { + .phy_cfg = phy_cfg_exynos5, + .phy_ops = &exynos5_usbdrd_phy_ops, + .pmu_offset_usbdrd0_phy = EXYNOS5_USBDRD_PHY_CONTROL, + .pmu_offset_usbdrd1_phy = EXYNOS5433_USBHOST30_PHY_CONTROL, + .has_common_clk_gate = false, +}; + +static const struct exynos5_usbdrd_phy_drvdata exynos7_usbdrd_phy = { + .phy_cfg = phy_cfg_exynos5, + .phy_ops = &exynos5_usbdrd_phy_ops, + .pmu_offset_usbdrd0_phy = EXYNOS5_USBDRD_PHY_CONTROL, + .has_common_clk_gate = false, +}; + +static const struct exynos5_usbdrd_phy_drvdata exynos850_usbdrd_phy = { + .phy_cfg = phy_cfg_exynos850, + .phy_ops = &exynos850_usbdrd_phy_ops, + .pmu_offset_usbdrd0_phy = EXYNOS5_USBDRD_PHY_CONTROL, + .has_common_clk_gate = true, +}; + +static const struct of_device_id exynos5_usbdrd_phy_of_match[] = { + { + .compatible = "samsung,exynos5250-usbdrd-phy", + .data = &exynos5250_usbdrd_phy + }, { + .compatible = "samsung,exynos5420-usbdrd-phy", + .data = &exynos5420_usbdrd_phy + }, { + .compatible = "samsung,exynos5433-usbdrd-phy", + .data = &exynos5433_usbdrd_phy + }, { + .compatible = "samsung,exynos7-usbdrd-phy", + .data = &exynos7_usbdrd_phy + }, { + .compatible = "samsung,exynos850-usbdrd-phy", + .data = &exynos850_usbdrd_phy + }, + { }, +}; +MODULE_DEVICE_TABLE(of, exynos5_usbdrd_phy_of_match); + +static int exynos5_usbdrd_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *node = dev->of_node; + struct exynos5_usbdrd_phy *phy_drd; + struct phy_provider *phy_provider; + const struct exynos5_usbdrd_phy_drvdata *drv_data; + struct regmap *reg_pmu; + u32 pmu_offset; + int i, ret; + int channel; + + phy_drd = devm_kzalloc(dev, sizeof(*phy_drd), GFP_KERNEL); + if (!phy_drd) + return -ENOMEM; + + dev_set_drvdata(dev, phy_drd); + phy_drd->dev = dev; + + phy_drd->reg_phy = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(phy_drd->reg_phy)) + return PTR_ERR(phy_drd->reg_phy); + + drv_data = of_device_get_match_data(dev); + if (!drv_data) + return -EINVAL; + + phy_drd->drv_data = drv_data; + + ret = exynos5_usbdrd_phy_clk_handle(phy_drd); + if (ret) { + dev_err(dev, "Failed to initialize clocks\n"); + return ret; + } + + reg_pmu = syscon_regmap_lookup_by_phandle(dev->of_node, + "samsung,pmu-syscon"); + if (IS_ERR(reg_pmu)) { + dev_err(dev, "Failed to lookup PMU regmap\n"); + return PTR_ERR(reg_pmu); + } + + /* + * Exynos5420 SoC has multiple channels for USB 3.0 PHY, with + * each having separate power control registers. + * 'channel' facilitates to set such registers. + */ + channel = of_alias_get_id(node, "usbdrdphy"); + if (channel < 0) + dev_dbg(dev, "Not a multi-controller usbdrd phy\n"); + + switch (channel) { + case 1: + pmu_offset = phy_drd->drv_data->pmu_offset_usbdrd1_phy; + break; + case 0: + default: + pmu_offset = phy_drd->drv_data->pmu_offset_usbdrd0_phy; + break; + } + + /* Get Vbus regulators */ + phy_drd->vbus = devm_regulator_get(dev, "vbus"); + if (IS_ERR(phy_drd->vbus)) { + ret = PTR_ERR(phy_drd->vbus); + if (ret == -EPROBE_DEFER) + return ret; + + dev_warn(dev, "Failed to get VBUS supply regulator\n"); + phy_drd->vbus = NULL; + } + + phy_drd->vbus_boost = devm_regulator_get(dev, "vbus-boost"); + if (IS_ERR(phy_drd->vbus_boost)) { + ret = PTR_ERR(phy_drd->vbus_boost); + if (ret == -EPROBE_DEFER) + return ret; + + dev_warn(dev, "Failed to get VBUS boost supply regulator\n"); + phy_drd->vbus_boost = NULL; + } + + dev_vdbg(dev, "Creating usbdrd_phy phy\n"); + + for (i = 0; i < EXYNOS5_DRDPHYS_NUM; i++) { + struct phy *phy = devm_phy_create(dev, NULL, drv_data->phy_ops); + + if (IS_ERR(phy)) { + dev_err(dev, "Failed to create usbdrd_phy phy\n"); + return PTR_ERR(phy); + } + + phy_drd->phys[i].phy = phy; + phy_drd->phys[i].index = i; + phy_drd->phys[i].reg_pmu = reg_pmu; + phy_drd->phys[i].pmu_offset = pmu_offset; + phy_drd->phys[i].phy_cfg = &drv_data->phy_cfg[i]; + phy_set_drvdata(phy, &phy_drd->phys[i]); + } + + phy_provider = devm_of_phy_provider_register(dev, + exynos5_usbdrd_phy_xlate); + if (IS_ERR(phy_provider)) { + dev_err(phy_drd->dev, "Failed to register phy provider\n"); + return PTR_ERR(phy_provider); + } + + return 0; +} + +static struct platform_driver exynos5_usb3drd_phy = { + .probe = exynos5_usbdrd_phy_probe, + .driver = { + .of_match_table = exynos5_usbdrd_phy_of_match, + .name = "exynos5_usb3drd_phy", + .suppress_bind_attrs = true, + } +}; + +module_platform_driver(exynos5_usb3drd_phy); +MODULE_DESCRIPTION("Samsung Exynos5 SoCs USB 3.0 DRD controller PHY driver"); +MODULE_AUTHOR("Vivek Gautam "); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:exynos5_usb3drd_phy"); diff --git a/drivers/phy/samsung/phy-exynos5250-sata.c b/drivers/phy/samsung/phy-exynos5250-sata.c new file mode 100644 index 0000000000..595adba5fb --- /dev/null +++ b/drivers/phy/samsung/phy-exynos5250-sata.c @@ -0,0 +1,254 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Samsung SATA SerDes(PHY) driver + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Authors: Girish K S + * Yuvaraj Kumar C D + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define SATAPHY_CONTROL_OFFSET 0x0724 +#define EXYNOS5_SATAPHY_PMU_ENABLE BIT(0) +#define EXYNOS5_SATA_RESET 0x4 +#define RESET_GLOBAL_RST_N BIT(0) +#define RESET_CMN_RST_N BIT(1) +#define RESET_CMN_BLOCK_RST_N BIT(2) +#define RESET_CMN_I2C_RST_N BIT(3) +#define RESET_TX_RX_PIPE_RST_N BIT(4) +#define RESET_TX_RX_BLOCK_RST_N BIT(5) +#define RESET_TX_RX_I2C_RST_N (BIT(6) | BIT(7)) +#define LINK_RESET 0xf0000 +#define EXYNOS5_SATA_MODE0 0x10 +#define SATA_SPD_GEN3 BIT(1) +#define EXYNOS5_SATA_CTRL0 0x14 +#define CTRL0_P0_PHY_CALIBRATED_SEL BIT(9) +#define CTRL0_P0_PHY_CALIBRATED BIT(8) +#define EXYNOS5_SATA_PHSATA_CTRLM 0xe0 +#define PHCTRLM_REF_RATE BIT(1) +#define PHCTRLM_HIGH_SPEED BIT(0) +#define EXYNOS5_SATA_PHSATA_STATM 0xf0 +#define PHSTATM_PLL_LOCKED BIT(0) + +#define PHY_PLL_TIMEOUT (usecs_to_jiffies(1000)) + +struct exynos_sata_phy { + struct phy *phy; + struct clk *phyclk; + void __iomem *regs; + struct regmap *pmureg; + struct i2c_client *client; +}; + +static int wait_for_reg_status(void __iomem *base, u32 reg, u32 checkbit, + u32 status) +{ + unsigned long timeout = jiffies + PHY_PLL_TIMEOUT; + + while (time_before(jiffies, timeout)) { + if ((readl(base + reg) & checkbit) == status) + return 0; + } + + return -EFAULT; +} + +static int exynos_sata_phy_power_on(struct phy *phy) +{ + struct exynos_sata_phy *sata_phy = phy_get_drvdata(phy); + + return regmap_update_bits(sata_phy->pmureg, SATAPHY_CONTROL_OFFSET, + EXYNOS5_SATAPHY_PMU_ENABLE, true); + +} + +static int exynos_sata_phy_power_off(struct phy *phy) +{ + struct exynos_sata_phy *sata_phy = phy_get_drvdata(phy); + + return regmap_update_bits(sata_phy->pmureg, SATAPHY_CONTROL_OFFSET, + EXYNOS5_SATAPHY_PMU_ENABLE, false); + +} + +static int exynos_sata_phy_init(struct phy *phy) +{ + u32 val = 0; + int ret = 0; + u8 buf[] = { 0x3a, 0x0b }; + struct exynos_sata_phy *sata_phy = phy_get_drvdata(phy); + + ret = regmap_update_bits(sata_phy->pmureg, SATAPHY_CONTROL_OFFSET, + EXYNOS5_SATAPHY_PMU_ENABLE, true); + if (ret != 0) + dev_err(&sata_phy->phy->dev, "phy init failed\n"); + + writel(val, sata_phy->regs + EXYNOS5_SATA_RESET); + + val = readl(sata_phy->regs + EXYNOS5_SATA_RESET); + val |= RESET_GLOBAL_RST_N | RESET_CMN_RST_N | RESET_CMN_BLOCK_RST_N + | RESET_CMN_I2C_RST_N | RESET_TX_RX_PIPE_RST_N + | RESET_TX_RX_BLOCK_RST_N | RESET_TX_RX_I2C_RST_N; + writel(val, sata_phy->regs + EXYNOS5_SATA_RESET); + + val = readl(sata_phy->regs + EXYNOS5_SATA_RESET); + val |= LINK_RESET; + writel(val, sata_phy->regs + EXYNOS5_SATA_RESET); + + val = readl(sata_phy->regs + EXYNOS5_SATA_RESET); + val |= RESET_CMN_RST_N; + writel(val, sata_phy->regs + EXYNOS5_SATA_RESET); + + val = readl(sata_phy->regs + EXYNOS5_SATA_PHSATA_CTRLM); + val &= ~PHCTRLM_REF_RATE; + writel(val, sata_phy->regs + EXYNOS5_SATA_PHSATA_CTRLM); + + /* High speed enable for Gen3 */ + val = readl(sata_phy->regs + EXYNOS5_SATA_PHSATA_CTRLM); + val |= PHCTRLM_HIGH_SPEED; + writel(val, sata_phy->regs + EXYNOS5_SATA_PHSATA_CTRLM); + + val = readl(sata_phy->regs + EXYNOS5_SATA_CTRL0); + val |= CTRL0_P0_PHY_CALIBRATED_SEL | CTRL0_P0_PHY_CALIBRATED; + writel(val, sata_phy->regs + EXYNOS5_SATA_CTRL0); + + val = readl(sata_phy->regs + EXYNOS5_SATA_MODE0); + val |= SATA_SPD_GEN3; + writel(val, sata_phy->regs + EXYNOS5_SATA_MODE0); + + ret = i2c_master_send(sata_phy->client, buf, sizeof(buf)); + if (ret < 0) + return ret; + + /* release cmu reset */ + val = readl(sata_phy->regs + EXYNOS5_SATA_RESET); + val &= ~RESET_CMN_RST_N; + writel(val, sata_phy->regs + EXYNOS5_SATA_RESET); + + val = readl(sata_phy->regs + EXYNOS5_SATA_RESET); + val |= RESET_CMN_RST_N; + writel(val, sata_phy->regs + EXYNOS5_SATA_RESET); + + ret = wait_for_reg_status(sata_phy->regs, + EXYNOS5_SATA_PHSATA_STATM, + PHSTATM_PLL_LOCKED, 1); + if (ret < 0) + dev_err(&sata_phy->phy->dev, + "PHY PLL locking failed\n"); + return ret; +} + +static const struct phy_ops exynos_sata_phy_ops = { + .init = exynos_sata_phy_init, + .power_on = exynos_sata_phy_power_on, + .power_off = exynos_sata_phy_power_off, + .owner = THIS_MODULE, +}; + +static int exynos_sata_phy_probe(struct platform_device *pdev) +{ + struct exynos_sata_phy *sata_phy; + struct device *dev = &pdev->dev; + struct phy_provider *phy_provider; + struct device_node *node; + int ret = 0; + + sata_phy = devm_kzalloc(dev, sizeof(*sata_phy), GFP_KERNEL); + if (!sata_phy) + return -ENOMEM; + + sata_phy->regs = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(sata_phy->regs)) + return PTR_ERR(sata_phy->regs); + + sata_phy->pmureg = syscon_regmap_lookup_by_phandle(dev->of_node, + "samsung,syscon-phandle"); + if (IS_ERR(sata_phy->pmureg)) { + dev_err(dev, "syscon regmap lookup failed.\n"); + return PTR_ERR(sata_phy->pmureg); + } + + node = of_parse_phandle(dev->of_node, + "samsung,exynos-sataphy-i2c-phandle", 0); + if (!node) + return -EINVAL; + + sata_phy->client = of_find_i2c_device_by_node(node); + of_node_put(node); + if (!sata_phy->client) + return -EPROBE_DEFER; + + dev_set_drvdata(dev, sata_phy); + + sata_phy->phyclk = devm_clk_get(dev, "sata_phyctrl"); + if (IS_ERR(sata_phy->phyclk)) { + dev_err(dev, "failed to get clk for PHY\n"); + ret = PTR_ERR(sata_phy->phyclk); + goto put_dev; + } + + ret = clk_prepare_enable(sata_phy->phyclk); + if (ret < 0) { + dev_err(dev, "failed to enable source clk\n"); + goto put_dev; + } + + sata_phy->phy = devm_phy_create(dev, NULL, &exynos_sata_phy_ops); + if (IS_ERR(sata_phy->phy)) { + dev_err(dev, "failed to create PHY\n"); + ret = PTR_ERR(sata_phy->phy); + goto clk_disable; + } + + phy_set_drvdata(sata_phy->phy, sata_phy); + + phy_provider = devm_of_phy_provider_register(dev, + of_phy_simple_xlate); + if (IS_ERR(phy_provider)) { + ret = PTR_ERR(phy_provider); + goto clk_disable; + } + + return 0; + +clk_disable: + clk_disable_unprepare(sata_phy->phyclk); +put_dev: + put_device(&sata_phy->client->dev); + + return ret; +} + +static const struct of_device_id exynos_sata_phy_of_match[] = { + { .compatible = "samsung,exynos5250-sata-phy" }, + { }, +}; +MODULE_DEVICE_TABLE(of, exynos_sata_phy_of_match); + +static struct platform_driver exynos_sata_phy_driver = { + .probe = exynos_sata_phy_probe, + .driver = { + .of_match_table = exynos_sata_phy_of_match, + .name = "samsung,sata-phy", + .suppress_bind_attrs = true, + } +}; +module_platform_driver(exynos_sata_phy_driver); + +MODULE_DESCRIPTION("Samsung SerDes PHY driver"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Girish K S "); +MODULE_AUTHOR("Yuvaraj C D "); diff --git a/drivers/phy/samsung/phy-exynos5250-usb2.c b/drivers/phy/samsung/phy-exynos5250-usb2.c new file mode 100644 index 0000000000..e198010e1b --- /dev/null +++ b/drivers/phy/samsung/phy-exynos5250-usb2.c @@ -0,0 +1,418 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Samsung SoC USB 1.1/2.0 PHY driver - Exynos 5250 support + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Author: Kamil Debski + */ + +#include +#include +#include +#include +#include "phy-samsung-usb2.h" + +/* Exynos USB PHY registers */ +#define EXYNOS_5250_REFCLKSEL_CRYSTAL 0x0 +#define EXYNOS_5250_REFCLKSEL_XO 0x1 +#define EXYNOS_5250_REFCLKSEL_CLKCORE 0x2 + +#define EXYNOS_5250_FSEL_9MHZ6 0x0 +#define EXYNOS_5250_FSEL_10MHZ 0x1 +#define EXYNOS_5250_FSEL_12MHZ 0x2 +#define EXYNOS_5250_FSEL_19MHZ2 0x3 +#define EXYNOS_5250_FSEL_20MHZ 0x4 +#define EXYNOS_5250_FSEL_24MHZ 0x5 +#define EXYNOS_5250_FSEL_50MHZ 0x7 + +/* Normal host */ +#define EXYNOS_5250_HOSTPHYCTRL0 0x0 + +#define EXYNOS_5250_HOSTPHYCTRL0_PHYSWRSTALL BIT(31) +#define EXYNOS_5250_HOSTPHYCTRL0_REFCLKSEL_SHIFT 19 +#define EXYNOS_5250_HOSTPHYCTRL0_REFCLKSEL_MASK \ + (0x3 << EXYNOS_5250_HOSTPHYCTRL0_REFCLKSEL_SHIFT) +#define EXYNOS_5250_HOSTPHYCTRL0_FSEL_SHIFT 16 +#define EXYNOS_5250_HOSTPHYCTRL0_FSEL_MASK \ + (0x7 << EXYNOS_5250_HOSTPHYCTRL0_FSEL_SHIFT) +#define EXYNOS_5250_HOSTPHYCTRL0_TESTBURNIN BIT(11) +#define EXYNOS_5250_HOSTPHYCTRL0_RETENABLE BIT(10) +#define EXYNOS_5250_HOSTPHYCTRL0_COMMON_ON_N BIT(9) +#define EXYNOS_5250_HOSTPHYCTRL0_VATESTENB_MASK (0x3 << 7) +#define EXYNOS_5250_HOSTPHYCTRL0_VATESTENB_DUAL (0x0 << 7) +#define EXYNOS_5250_HOSTPHYCTRL0_VATESTENB_ID0 (0x1 << 7) +#define EXYNOS_5250_HOSTPHYCTRL0_VATESTENB_ANALOGTEST (0x2 << 7) +#define EXYNOS_5250_HOSTPHYCTRL0_SIDDQ BIT(6) +#define EXYNOS_5250_HOSTPHYCTRL0_FORCESLEEP BIT(5) +#define EXYNOS_5250_HOSTPHYCTRL0_FORCESUSPEND BIT(4) +#define EXYNOS_5250_HOSTPHYCTRL0_WORDINTERFACE BIT(3) +#define EXYNOS_5250_HOSTPHYCTRL0_UTMISWRST BIT(2) +#define EXYNOS_5250_HOSTPHYCTRL0_LINKSWRST BIT(1) +#define EXYNOS_5250_HOSTPHYCTRL0_PHYSWRST BIT(0) + +/* HSIC0 & HSIC1 */ +#define EXYNOS_5250_HSICPHYCTRL1 0x10 +#define EXYNOS_5250_HSICPHYCTRL2 0x20 + +#define EXYNOS_5250_HSICPHYCTRLX_REFCLKSEL_MASK (0x3 << 23) +#define EXYNOS_5250_HSICPHYCTRLX_REFCLKSEL_DEFAULT (0x2 << 23) +#define EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_MASK (0x7f << 16) +#define EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_12 (0x24 << 16) +#define EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_15 (0x1c << 16) +#define EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_16 (0x1a << 16) +#define EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_19_2 (0x15 << 16) +#define EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_20 (0x14 << 16) +#define EXYNOS_5250_HSICPHYCTRLX_SIDDQ BIT(6) +#define EXYNOS_5250_HSICPHYCTRLX_FORCESLEEP BIT(5) +#define EXYNOS_5250_HSICPHYCTRLX_FORCESUSPEND BIT(4) +#define EXYNOS_5250_HSICPHYCTRLX_WORDINTERFACE BIT(3) +#define EXYNOS_5250_HSICPHYCTRLX_UTMISWRST BIT(2) +#define EXYNOS_5250_HSICPHYCTRLX_PHYSWRST BIT(0) + +/* EHCI control */ +#define EXYNOS_5250_HOSTEHCICTRL 0x30 +#define EXYNOS_5250_HOSTEHCICTRL_ENAINCRXALIGN BIT(29) +#define EXYNOS_5250_HOSTEHCICTRL_ENAINCR4 BIT(28) +#define EXYNOS_5250_HOSTEHCICTRL_ENAINCR8 BIT(27) +#define EXYNOS_5250_HOSTEHCICTRL_ENAINCR16 BIT(26) +#define EXYNOS_5250_HOSTEHCICTRL_AUTOPPDONOVRCUREN BIT(25) +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL0_SHIFT 19 +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL0_MASK \ + (0x3f << EXYNOS_5250_HOSTEHCICTRL_FLADJVAL0_SHIFT) +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL1_SHIFT 13 +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL1_MASK \ + (0x3f << EXYNOS_5250_HOSTEHCICTRL_FLADJVAL1_SHIFT) +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL2_SHIFT 7 +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL0_MASK \ + (0x3f << EXYNOS_5250_HOSTEHCICTRL_FLADJVAL0_SHIFT) +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVALHOST_SHIFT 1 +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVALHOST_MASK \ + (0x1 << EXYNOS_5250_HOSTEHCICTRL_FLADJVALHOST_SHIFT) +#define EXYNOS_5250_HOSTEHCICTRL_SIMULATIONMODE BIT(0) + +/* OHCI control */ +#define EXYNOS_5250_HOSTOHCICTRL 0x34 +#define EXYNOS_5250_HOSTOHCICTRL_FRAMELENVAL_SHIFT 1 +#define EXYNOS_5250_HOSTOHCICTRL_FRAMELENVAL_MASK \ + (0x3ff << EXYNOS_5250_HOSTOHCICTRL_FRAMELENVAL_SHIFT) +#define EXYNOS_5250_HOSTOHCICTRL_FRAMELENVALEN BIT(0) + +/* USBOTG */ +#define EXYNOS_5250_USBOTGSYS 0x38 +#define EXYNOS_5250_USBOTGSYS_PHYLINK_SW_RESET BIT(14) +#define EXYNOS_5250_USBOTGSYS_LINK_SW_RST_UOTG BIT(13) +#define EXYNOS_5250_USBOTGSYS_PHY_SW_RST BIT(12) +#define EXYNOS_5250_USBOTGSYS_REFCLKSEL_SHIFT 9 +#define EXYNOS_5250_USBOTGSYS_REFCLKSEL_MASK \ + (0x3 << EXYNOS_5250_USBOTGSYS_REFCLKSEL_SHIFT) +#define EXYNOS_5250_USBOTGSYS_ID_PULLUP BIT(8) +#define EXYNOS_5250_USBOTGSYS_COMMON_ON BIT(7) +#define EXYNOS_5250_USBOTGSYS_FSEL_SHIFT 4 +#define EXYNOS_5250_USBOTGSYS_FSEL_MASK \ + (0x3 << EXYNOS_5250_USBOTGSYS_FSEL_SHIFT) +#define EXYNOS_5250_USBOTGSYS_FORCE_SLEEP BIT(3) +#define EXYNOS_5250_USBOTGSYS_OTGDISABLE BIT(2) +#define EXYNOS_5250_USBOTGSYS_SIDDQ_UOTG BIT(1) +#define EXYNOS_5250_USBOTGSYS_FORCE_SUSPEND BIT(0) + +/* Isolation, configured in the power management unit */ +#define EXYNOS_5250_USB_ISOL_OTG_OFFSET 0x704 +#define EXYNOS_5250_USB_ISOL_HOST_OFFSET 0x708 +#define EXYNOS_5420_USB_ISOL_HOST_OFFSET 0x70C +#define EXYNOS_5250_USB_ISOL_ENABLE BIT(0) + +/* Mode swtich register */ +#define EXYNOS_5250_MODE_SWITCH_OFFSET 0x230 +#define EXYNOS_5250_MODE_SWITCH_MASK 1 +#define EXYNOS_5250_MODE_SWITCH_DEVICE 0 +#define EXYNOS_5250_MODE_SWITCH_HOST 1 + +enum exynos4x12_phy_id { + EXYNOS5250_DEVICE, + EXYNOS5250_HOST, + EXYNOS5250_HSIC0, + EXYNOS5250_HSIC1, +}; + +/* + * exynos5250_rate_to_clk() converts the supplied clock rate to the value that + * can be written to the phy register. + */ +static int exynos5250_rate_to_clk(unsigned long rate, u32 *reg) +{ + /* EXYNOS_5250_FSEL_MASK */ + + switch (rate) { + case 9600 * KHZ: + *reg = EXYNOS_5250_FSEL_9MHZ6; + break; + case 10 * MHZ: + *reg = EXYNOS_5250_FSEL_10MHZ; + break; + case 12 * MHZ: + *reg = EXYNOS_5250_FSEL_12MHZ; + break; + case 19200 * KHZ: + *reg = EXYNOS_5250_FSEL_19MHZ2; + break; + case 20 * MHZ: + *reg = EXYNOS_5250_FSEL_20MHZ; + break; + case 24 * MHZ: + *reg = EXYNOS_5250_FSEL_24MHZ; + break; + case 50 * MHZ: + *reg = EXYNOS_5250_FSEL_50MHZ; + break; + default: + return -EINVAL; + } + + return 0; +} + +static void exynos5250_isol(struct samsung_usb2_phy_instance *inst, bool on) +{ + struct samsung_usb2_phy_driver *drv = inst->drv; + u32 offset; + u32 mask = EXYNOS_5250_USB_ISOL_ENABLE; + + if (drv->cfg == &exynos5250_usb2_phy_config && + inst->cfg->id == EXYNOS5250_DEVICE) + offset = EXYNOS_5250_USB_ISOL_OTG_OFFSET; + else if (drv->cfg == &exynos5250_usb2_phy_config && + inst->cfg->id == EXYNOS5250_HOST) + offset = EXYNOS_5250_USB_ISOL_HOST_OFFSET; + else if (drv->cfg == &exynos5420_usb2_phy_config && + inst->cfg->id == EXYNOS5250_HOST) + offset = EXYNOS_5420_USB_ISOL_HOST_OFFSET; + else + return; + + regmap_update_bits(drv->reg_pmu, offset, mask, on ? 0 : mask); +} + +static int exynos5250_power_on(struct samsung_usb2_phy_instance *inst) +{ + struct samsung_usb2_phy_driver *drv = inst->drv; + u32 ctrl0; + u32 otg; + u32 ehci; + u32 ohci; + u32 hsic; + + switch (inst->cfg->id) { + case EXYNOS5250_DEVICE: + regmap_update_bits(drv->reg_sys, + EXYNOS_5250_MODE_SWITCH_OFFSET, + EXYNOS_5250_MODE_SWITCH_MASK, + EXYNOS_5250_MODE_SWITCH_DEVICE); + + /* OTG configuration */ + otg = readl(drv->reg_phy + EXYNOS_5250_USBOTGSYS); + /* The clock */ + otg &= ~EXYNOS_5250_USBOTGSYS_FSEL_MASK; + otg |= drv->ref_reg_val << EXYNOS_5250_USBOTGSYS_FSEL_SHIFT; + /* Reset */ + otg &= ~(EXYNOS_5250_USBOTGSYS_FORCE_SUSPEND | + EXYNOS_5250_USBOTGSYS_FORCE_SLEEP | + EXYNOS_5250_USBOTGSYS_SIDDQ_UOTG); + otg |= EXYNOS_5250_USBOTGSYS_PHY_SW_RST | + EXYNOS_5250_USBOTGSYS_PHYLINK_SW_RESET | + EXYNOS_5250_USBOTGSYS_LINK_SW_RST_UOTG | + EXYNOS_5250_USBOTGSYS_OTGDISABLE; + /* Ref clock */ + otg &= ~EXYNOS_5250_USBOTGSYS_REFCLKSEL_MASK; + otg |= EXYNOS_5250_REFCLKSEL_CLKCORE << + EXYNOS_5250_USBOTGSYS_REFCLKSEL_SHIFT; + writel(otg, drv->reg_phy + EXYNOS_5250_USBOTGSYS); + udelay(100); + otg &= ~(EXYNOS_5250_USBOTGSYS_PHY_SW_RST | + EXYNOS_5250_USBOTGSYS_LINK_SW_RST_UOTG | + EXYNOS_5250_USBOTGSYS_PHYLINK_SW_RESET | + EXYNOS_5250_USBOTGSYS_OTGDISABLE); + writel(otg, drv->reg_phy + EXYNOS_5250_USBOTGSYS); + + + break; + case EXYNOS5250_HOST: + case EXYNOS5250_HSIC0: + case EXYNOS5250_HSIC1: + /* Host registers configuration */ + ctrl0 = readl(drv->reg_phy + EXYNOS_5250_HOSTPHYCTRL0); + /* The clock */ + ctrl0 &= ~EXYNOS_5250_HOSTPHYCTRL0_FSEL_MASK; + ctrl0 |= drv->ref_reg_val << + EXYNOS_5250_HOSTPHYCTRL0_FSEL_SHIFT; + + /* Reset */ + ctrl0 &= ~(EXYNOS_5250_HOSTPHYCTRL0_PHYSWRST | + EXYNOS_5250_HOSTPHYCTRL0_PHYSWRSTALL | + EXYNOS_5250_HOSTPHYCTRL0_SIDDQ | + EXYNOS_5250_HOSTPHYCTRL0_FORCESUSPEND | + EXYNOS_5250_HOSTPHYCTRL0_FORCESLEEP); + ctrl0 |= EXYNOS_5250_HOSTPHYCTRL0_LINKSWRST | + EXYNOS_5250_HOSTPHYCTRL0_UTMISWRST | + EXYNOS_5250_HOSTPHYCTRL0_COMMON_ON_N; + writel(ctrl0, drv->reg_phy + EXYNOS_5250_HOSTPHYCTRL0); + udelay(10); + ctrl0 &= ~(EXYNOS_5250_HOSTPHYCTRL0_LINKSWRST | + EXYNOS_5250_HOSTPHYCTRL0_UTMISWRST); + writel(ctrl0, drv->reg_phy + EXYNOS_5250_HOSTPHYCTRL0); + + /* OTG configuration */ + otg = readl(drv->reg_phy + EXYNOS_5250_USBOTGSYS); + /* The clock */ + otg &= ~EXYNOS_5250_USBOTGSYS_FSEL_MASK; + otg |= drv->ref_reg_val << EXYNOS_5250_USBOTGSYS_FSEL_SHIFT; + /* Reset */ + otg &= ~(EXYNOS_5250_USBOTGSYS_FORCE_SUSPEND | + EXYNOS_5250_USBOTGSYS_FORCE_SLEEP | + EXYNOS_5250_USBOTGSYS_SIDDQ_UOTG); + otg |= EXYNOS_5250_USBOTGSYS_PHY_SW_RST | + EXYNOS_5250_USBOTGSYS_PHYLINK_SW_RESET | + EXYNOS_5250_USBOTGSYS_LINK_SW_RST_UOTG | + EXYNOS_5250_USBOTGSYS_OTGDISABLE; + /* Ref clock */ + otg &= ~EXYNOS_5250_USBOTGSYS_REFCLKSEL_MASK; + otg |= EXYNOS_5250_REFCLKSEL_CLKCORE << + EXYNOS_5250_USBOTGSYS_REFCLKSEL_SHIFT; + writel(otg, drv->reg_phy + EXYNOS_5250_USBOTGSYS); + udelay(10); + otg &= ~(EXYNOS_5250_USBOTGSYS_PHY_SW_RST | + EXYNOS_5250_USBOTGSYS_LINK_SW_RST_UOTG | + EXYNOS_5250_USBOTGSYS_PHYLINK_SW_RESET); + + /* HSIC phy configuration */ + hsic = (EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_12 | + EXYNOS_5250_HSICPHYCTRLX_REFCLKSEL_DEFAULT | + EXYNOS_5250_HSICPHYCTRLX_PHYSWRST); + writel(hsic, drv->reg_phy + EXYNOS_5250_HSICPHYCTRL1); + writel(hsic, drv->reg_phy + EXYNOS_5250_HSICPHYCTRL2); + udelay(10); + hsic &= ~EXYNOS_5250_HSICPHYCTRLX_PHYSWRST; + writel(hsic, drv->reg_phy + EXYNOS_5250_HSICPHYCTRL1); + writel(hsic, drv->reg_phy + EXYNOS_5250_HSICPHYCTRL2); + /* The following delay is necessary for the reset sequence to be + * completed */ + udelay(80); + + /* Enable EHCI DMA burst */ + ehci = readl(drv->reg_phy + EXYNOS_5250_HOSTEHCICTRL); + ehci |= EXYNOS_5250_HOSTEHCICTRL_ENAINCRXALIGN | + EXYNOS_5250_HOSTEHCICTRL_ENAINCR4 | + EXYNOS_5250_HOSTEHCICTRL_ENAINCR8 | + EXYNOS_5250_HOSTEHCICTRL_ENAINCR16; + writel(ehci, drv->reg_phy + EXYNOS_5250_HOSTEHCICTRL); + + /* OHCI settings */ + ohci = readl(drv->reg_phy + EXYNOS_5250_HOSTOHCICTRL); + /* Following code is based on the old driver */ + ohci |= 0x1 << 3; + writel(ohci, drv->reg_phy + EXYNOS_5250_HOSTOHCICTRL); + + break; + } + exynos5250_isol(inst, 0); + + return 0; +} + +static int exynos5250_power_off(struct samsung_usb2_phy_instance *inst) +{ + struct samsung_usb2_phy_driver *drv = inst->drv; + u32 ctrl0; + u32 otg; + u32 hsic; + + exynos5250_isol(inst, 1); + + switch (inst->cfg->id) { + case EXYNOS5250_DEVICE: + otg = readl(drv->reg_phy + EXYNOS_5250_USBOTGSYS); + otg |= (EXYNOS_5250_USBOTGSYS_FORCE_SUSPEND | + EXYNOS_5250_USBOTGSYS_SIDDQ_UOTG | + EXYNOS_5250_USBOTGSYS_FORCE_SLEEP); + writel(otg, drv->reg_phy + EXYNOS_5250_USBOTGSYS); + break; + case EXYNOS5250_HOST: + ctrl0 = readl(drv->reg_phy + EXYNOS_5250_HOSTPHYCTRL0); + ctrl0 |= (EXYNOS_5250_HOSTPHYCTRL0_SIDDQ | + EXYNOS_5250_HOSTPHYCTRL0_FORCESUSPEND | + EXYNOS_5250_HOSTPHYCTRL0_FORCESLEEP | + EXYNOS_5250_HOSTPHYCTRL0_PHYSWRST | + EXYNOS_5250_HOSTPHYCTRL0_PHYSWRSTALL); + writel(ctrl0, drv->reg_phy + EXYNOS_5250_HOSTPHYCTRL0); + break; + case EXYNOS5250_HSIC0: + case EXYNOS5250_HSIC1: + hsic = (EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_12 | + EXYNOS_5250_HSICPHYCTRLX_REFCLKSEL_DEFAULT | + EXYNOS_5250_HSICPHYCTRLX_SIDDQ | + EXYNOS_5250_HSICPHYCTRLX_FORCESLEEP | + EXYNOS_5250_HSICPHYCTRLX_FORCESUSPEND + ); + writel(hsic, drv->reg_phy + EXYNOS_5250_HSICPHYCTRL1); + writel(hsic, drv->reg_phy + EXYNOS_5250_HSICPHYCTRL2); + break; + } + + return 0; +} + + +static const struct samsung_usb2_common_phy exynos5250_phys[] = { + { + .label = "device", + .id = EXYNOS5250_DEVICE, + .power_on = exynos5250_power_on, + .power_off = exynos5250_power_off, + }, + { + .label = "host", + .id = EXYNOS5250_HOST, + .power_on = exynos5250_power_on, + .power_off = exynos5250_power_off, + }, + { + .label = "hsic0", + .id = EXYNOS5250_HSIC0, + .power_on = exynos5250_power_on, + .power_off = exynos5250_power_off, + }, + { + .label = "hsic1", + .id = EXYNOS5250_HSIC1, + .power_on = exynos5250_power_on, + .power_off = exynos5250_power_off, + }, +}; + +static const struct samsung_usb2_common_phy exynos5420_phys[] = { + { + .label = "host", + .id = EXYNOS5250_HOST, + .power_on = exynos5250_power_on, + .power_off = exynos5250_power_off, + }, + { + .label = "hsic", + .id = EXYNOS5250_HSIC0, + .power_on = exynos5250_power_on, + .power_off = exynos5250_power_off, + }, +}; + +const struct samsung_usb2_phy_config exynos5250_usb2_phy_config = { + .has_mode_switch = 1, + .num_phys = ARRAY_SIZE(exynos5250_phys), + .phys = exynos5250_phys, + .rate_to_clk = exynos5250_rate_to_clk, +}; + +const struct samsung_usb2_phy_config exynos5420_usb2_phy_config = { + .has_mode_switch = 1, + .num_phys = ARRAY_SIZE(exynos5420_phys), + .phys = exynos5420_phys, + .rate_to_clk = exynos5250_rate_to_clk, +}; diff --git a/drivers/phy/samsung/phy-exynos7-ufs.c b/drivers/phy/samsung/phy-exynos7-ufs.c new file mode 100644 index 0000000000..a982e7c128 --- /dev/null +++ b/drivers/phy/samsung/phy-exynos7-ufs.c @@ -0,0 +1,85 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * UFS PHY driver data for Samsung EXYNOS7 SoC + * + * Copyright (C) 2020 Samsung Electronics Co., Ltd. + */ + +#include "phy-samsung-ufs.h" + +#define EXYNOS7_EMBEDDED_COMBO_PHY_CTRL 0x720 +#define EXYNOS7_EMBEDDED_COMBO_PHY_CTRL_MASK 0x1 +#define EXYNOS7_EMBEDDED_COMBO_PHY_CTRL_EN BIT(0) + +#define EXYNOS7_EMBEDDED_COMBO_PHY_CDR_LOCK_STATUS 0x5e + +/* Calibration for phy initialization */ +static const struct samsung_ufs_phy_cfg exynos7_pre_init_cfg[] = { + PHY_COMN_REG_CFG(0x00f, 0xfa, PWR_MODE_ANY), + PHY_COMN_REG_CFG(0x010, 0x82, PWR_MODE_ANY), + PHY_COMN_REG_CFG(0x011, 0x1e, PWR_MODE_ANY), + PHY_COMN_REG_CFG(0x017, 0x84, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x035, 0x58, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x036, 0x32, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x037, 0x40, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x03b, 0x83, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x042, 0x88, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x043, 0xa6, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x048, 0x74, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x04c, 0x5b, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x04d, 0x83, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x05c, 0x14, PWR_MODE_ANY), + END_UFS_PHY_CFG +}; + +/* Calibration for HS mode series A/B */ +static const struct samsung_ufs_phy_cfg exynos7_pre_pwr_hs_cfg[] = { + PHY_COMN_REG_CFG(0x00f, 0xfa, PWR_MODE_HS_ANY), + PHY_COMN_REG_CFG(0x010, 0x82, PWR_MODE_HS_ANY), + PHY_COMN_REG_CFG(0x011, 0x1e, PWR_MODE_HS_ANY), + /* Setting order: 1st(0x16, 2nd(0x15) */ + PHY_COMN_REG_CFG(0x016, 0xff, PWR_MODE_HS_ANY), + PHY_COMN_REG_CFG(0x015, 0x80, PWR_MODE_HS_ANY), + PHY_COMN_REG_CFG(0x017, 0x94, PWR_MODE_HS_ANY), + PHY_TRSV_REG_CFG(0x036, 0x32, PWR_MODE_HS_ANY), + PHY_TRSV_REG_CFG(0x037, 0x43, PWR_MODE_HS_ANY), + PHY_TRSV_REG_CFG(0x038, 0x3f, PWR_MODE_HS_ANY), + PHY_TRSV_REG_CFG(0x042, 0x88, PWR_MODE_HS_G2_SER_A), + PHY_TRSV_REG_CFG(0x042, 0xbb, PWR_MODE_HS_G2_SER_B), + PHY_TRSV_REG_CFG(0x043, 0xa6, PWR_MODE_HS_ANY), + PHY_TRSV_REG_CFG(0x048, 0x74, PWR_MODE_HS_ANY), + PHY_TRSV_REG_CFG(0x034, 0x35, PWR_MODE_HS_G2_SER_A), + PHY_TRSV_REG_CFG(0x034, 0x36, PWR_MODE_HS_G2_SER_B), + PHY_TRSV_REG_CFG(0x035, 0x5b, PWR_MODE_HS_G2_SER_A), + PHY_TRSV_REG_CFG(0x035, 0x5c, PWR_MODE_HS_G2_SER_B), + END_UFS_PHY_CFG +}; + +/* Calibration for HS mode series A/B atfer PMC */ +static const struct samsung_ufs_phy_cfg exynos7_post_pwr_hs_cfg[] = { + PHY_COMN_REG_CFG(0x015, 0x00, PWR_MODE_HS_ANY), + PHY_TRSV_REG_CFG(0x04d, 0x83, PWR_MODE_HS_ANY), + END_UFS_PHY_CFG +}; + +static const struct samsung_ufs_phy_cfg *exynos7_ufs_phy_cfgs[CFG_TAG_MAX] = { + [CFG_PRE_INIT] = exynos7_pre_init_cfg, + [CFG_PRE_PWR_HS] = exynos7_pre_pwr_hs_cfg, + [CFG_POST_PWR_HS] = exynos7_post_pwr_hs_cfg, +}; + +static const char * const exynos7_ufs_phy_clks[] = { + "tx0_symbol_clk", "rx0_symbol_clk", "rx1_symbol_clk", "ref_clk", +}; + +const struct samsung_ufs_phy_drvdata exynos7_ufs_phy = { + .cfgs = exynos7_ufs_phy_cfgs, + .isol = { + .offset = EXYNOS7_EMBEDDED_COMBO_PHY_CTRL, + .mask = EXYNOS7_EMBEDDED_COMBO_PHY_CTRL_MASK, + .en = EXYNOS7_EMBEDDED_COMBO_PHY_CTRL_EN, + }, + .clk_list = exynos7_ufs_phy_clks, + .num_clks = ARRAY_SIZE(exynos7_ufs_phy_clks), + .cdr_lock_status_offset = EXYNOS7_EMBEDDED_COMBO_PHY_CDR_LOCK_STATUS, +}; diff --git a/drivers/phy/samsung/phy-exynosautov9-ufs.c b/drivers/phy/samsung/phy-exynosautov9-ufs.c new file mode 100644 index 0000000000..49e2bcbef0 --- /dev/null +++ b/drivers/phy/samsung/phy-exynosautov9-ufs.c @@ -0,0 +1,74 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * UFS PHY driver data for Samsung EXYNOSAUTO v9 SoC + * + * Copyright (C) 2021 Samsung Electronics Co., Ltd. + */ + +#include "phy-samsung-ufs.h" + +#define EXYNOSAUTOV9_EMBEDDED_COMBO_PHY_CTRL 0x728 +#define EXYNOSAUTOV9_EMBEDDED_COMBO_PHY_CTRL_MASK 0x1 +#define EXYNOSAUTOV9_EMBEDDED_COMBO_PHY_CTRL_EN BIT(0) +#define EXYNOSAUTOV9_EMBEDDED_COMBO_PHY_CDR_LOCK_STATUS 0x5e + +#define PHY_TRSV_REG_CFG_AUTOV9(o, v, d) \ + PHY_TRSV_REG_CFG_OFFSET(o, v, d, 0x50) + +/* Calibration for phy initialization */ +static const struct samsung_ufs_phy_cfg exynosautov9_pre_init_cfg[] = { + PHY_COMN_REG_CFG(0x023, 0x80, PWR_MODE_ANY), + PHY_COMN_REG_CFG(0x01d, 0x10, PWR_MODE_ANY), + + PHY_TRSV_REG_CFG_AUTOV9(0x044, 0xb5, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV9(0x04d, 0x43, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV9(0x05b, 0x20, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV9(0x05e, 0xc0, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV9(0x038, 0x12, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV9(0x059, 0x58, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV9(0x06c, 0x18, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV9(0x06d, 0x02, PWR_MODE_ANY), + + PHY_COMN_REG_CFG(0x023, 0xc0, PWR_MODE_ANY), + PHY_COMN_REG_CFG(0x023, 0x00, PWR_MODE_ANY), + + PHY_TRSV_REG_CFG_AUTOV9(0x042, 0x5d, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV9(0x043, 0x80, PWR_MODE_ANY), + + END_UFS_PHY_CFG, +}; + +/* Calibration for HS mode series A/B */ +static const struct samsung_ufs_phy_cfg exynosautov9_pre_pwr_hs_cfg[] = { + PHY_TRSV_REG_CFG_AUTOV9(0x032, 0xbc, PWR_MODE_HS_ANY), + PHY_TRSV_REG_CFG_AUTOV9(0x03c, 0x7f, PWR_MODE_HS_ANY), + PHY_TRSV_REG_CFG_AUTOV9(0x048, 0xc0, PWR_MODE_HS_ANY), + + PHY_TRSV_REG_CFG_AUTOV9(0x04a, 0x00, PWR_MODE_HS_G3_SER_B), + PHY_TRSV_REG_CFG_AUTOV9(0x04b, 0x10, PWR_MODE_HS_G1_SER_B | + PWR_MODE_HS_G3_SER_B), + PHY_TRSV_REG_CFG_AUTOV9(0x04d, 0x63, PWR_MODE_HS_G3_SER_B), + + END_UFS_PHY_CFG, +}; + +static const struct samsung_ufs_phy_cfg *exynosautov9_ufs_phy_cfgs[CFG_TAG_MAX] = { + [CFG_PRE_INIT] = exynosautov9_pre_init_cfg, + [CFG_PRE_PWR_HS] = exynosautov9_pre_pwr_hs_cfg, +}; + +static const char * const exynosautov9_ufs_phy_clks[] = { + "ref_clk", +}; + +const struct samsung_ufs_phy_drvdata exynosautov9_ufs_phy = { + .cfgs = exynosautov9_ufs_phy_cfgs, + .isol = { + .offset = EXYNOSAUTOV9_EMBEDDED_COMBO_PHY_CTRL, + .mask = EXYNOSAUTOV9_EMBEDDED_COMBO_PHY_CTRL_MASK, + .en = EXYNOSAUTOV9_EMBEDDED_COMBO_PHY_CTRL_EN, + }, + .clk_list = exynosautov9_ufs_phy_clks, + .num_clks = ARRAY_SIZE(exynosautov9_ufs_phy_clks), + .cdr_lock_status_offset = EXYNOSAUTOV9_EMBEDDED_COMBO_PHY_CDR_LOCK_STATUS, +}; diff --git a/drivers/phy/samsung/phy-fsd-ufs.c b/drivers/phy/samsung/phy-fsd-ufs.c new file mode 100644 index 0000000000..d36cabd534 --- /dev/null +++ b/drivers/phy/samsung/phy-fsd-ufs.c @@ -0,0 +1,63 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * UFS PHY driver data for FSD SoC + * + * Copyright (C) 2022 Samsung Electronics Co., Ltd. + * + */ +#include "phy-samsung-ufs.h" + +#define FSD_EMBEDDED_COMBO_PHY_CTRL 0x724 +#define FSD_EMBEDDED_COMBO_PHY_CTRL_MASK 0x1 +#define FSD_EMBEDDED_COMBO_PHY_CTRL_EN BIT(0) +#define FSD_EMBEDDED_COMBO_PHY_CDR_LOCK_STATUS 0x6e + +static const struct samsung_ufs_phy_cfg fsd_pre_init_cfg[] = { + PHY_COMN_REG_CFG(0x00f, 0xfa, PWR_MODE_ANY), + PHY_COMN_REG_CFG(0x010, 0x82, PWR_MODE_ANY), + PHY_COMN_REG_CFG(0x011, 0x1e, PWR_MODE_ANY), + PHY_COMN_REG_CFG(0x017, 0x94, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x035, 0x58, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x036, 0x32, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x037, 0x40, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x03b, 0x83, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x042, 0x88, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x043, 0xa6, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x048, 0x74, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x04c, 0x5b, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x04d, 0x83, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x05c, 0x14, PWR_MODE_ANY), + END_UFS_PHY_CFG +}; + +/* Calibration for HS mode series A/B */ +static const struct samsung_ufs_phy_cfg fsd_pre_pwr_hs_cfg[] = { + END_UFS_PHY_CFG +}; + +/* Calibration for HS mode series A/B atfer PMC */ +static const struct samsung_ufs_phy_cfg fsd_post_pwr_hs_cfg[] = { + END_UFS_PHY_CFG +}; + +static const struct samsung_ufs_phy_cfg *fsd_ufs_phy_cfgs[CFG_TAG_MAX] = { + [CFG_PRE_INIT] = fsd_pre_init_cfg, + [CFG_PRE_PWR_HS] = fsd_pre_pwr_hs_cfg, + [CFG_POST_PWR_HS] = fsd_post_pwr_hs_cfg, +}; + +static const char * const fsd_ufs_phy_clks[] = { + "ref_clk", +}; + +const struct samsung_ufs_phy_drvdata fsd_ufs_phy = { + .cfgs = fsd_ufs_phy_cfgs, + .isol = { + .offset = FSD_EMBEDDED_COMBO_PHY_CTRL, + .mask = FSD_EMBEDDED_COMBO_PHY_CTRL_MASK, + .en = FSD_EMBEDDED_COMBO_PHY_CTRL_EN, + }, + .clk_list = fsd_ufs_phy_clks, + .num_clks = ARRAY_SIZE(fsd_ufs_phy_clks), + .cdr_lock_status_offset = FSD_EMBEDDED_COMBO_PHY_CDR_LOCK_STATUS, +}; diff --git a/drivers/phy/samsung/phy-s5pv210-usb2.c b/drivers/phy/samsung/phy-s5pv210-usb2.c new file mode 100644 index 0000000000..32be62e498 --- /dev/null +++ b/drivers/phy/samsung/phy-s5pv210-usb2.c @@ -0,0 +1,188 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Samsung SoC USB 1.1/2.0 PHY driver - S5PV210 support + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Authors: Kamil Debski + */ + +#include +#include +#include +#include "phy-samsung-usb2.h" + +/* Exynos USB PHY registers */ + +/* PHY power control */ +#define S5PV210_UPHYPWR 0x0 + +#define S5PV210_UPHYPWR_PHY0_SUSPEND BIT(0) +#define S5PV210_UPHYPWR_PHY0_PWR BIT(3) +#define S5PV210_UPHYPWR_PHY0_OTG_PWR BIT(4) +#define S5PV210_UPHYPWR_PHY0 ( \ + S5PV210_UPHYPWR_PHY0_SUSPEND | \ + S5PV210_UPHYPWR_PHY0_PWR | \ + S5PV210_UPHYPWR_PHY0_OTG_PWR) + +#define S5PV210_UPHYPWR_PHY1_SUSPEND BIT(6) +#define S5PV210_UPHYPWR_PHY1_PWR BIT(7) +#define S5PV210_UPHYPWR_PHY1 ( \ + S5PV210_UPHYPWR_PHY1_SUSPEND | \ + S5PV210_UPHYPWR_PHY1_PWR) + +/* PHY clock control */ +#define S5PV210_UPHYCLK 0x4 + +#define S5PV210_UPHYCLK_PHYFSEL_MASK (0x3 << 0) +#define S5PV210_UPHYCLK_PHYFSEL_48MHZ (0x0 << 0) +#define S5PV210_UPHYCLK_PHYFSEL_24MHZ (0x3 << 0) +#define S5PV210_UPHYCLK_PHYFSEL_12MHZ (0x2 << 0) + +#define S5PV210_UPHYCLK_PHY0_ID_PULLUP BIT(2) +#define S5PV210_UPHYCLK_PHY0_COMMON_ON BIT(4) +#define S5PV210_UPHYCLK_PHY1_COMMON_ON BIT(7) + +/* PHY reset control */ +#define S5PV210_UPHYRST 0x8 + +#define S5PV210_URSTCON_PHY0 BIT(0) +#define S5PV210_URSTCON_OTG_HLINK BIT(1) +#define S5PV210_URSTCON_OTG_PHYLINK BIT(2) +#define S5PV210_URSTCON_PHY1_ALL BIT(3) +#define S5PV210_URSTCON_HOST_LINK_ALL BIT(4) + +/* Isolation, configured in the power management unit */ +#define S5PV210_USB_ISOL_OFFSET 0x680c +#define S5PV210_USB_ISOL_DEVICE BIT(0) +#define S5PV210_USB_ISOL_HOST BIT(1) + + +enum s5pv210_phy_id { + S5PV210_DEVICE, + S5PV210_HOST, + S5PV210_NUM_PHYS, +}; + +/* + * s5pv210_rate_to_clk() converts the supplied clock rate to the value that + * can be written to the phy register. + */ +static int s5pv210_rate_to_clk(unsigned long rate, u32 *reg) +{ + switch (rate) { + case 12 * MHZ: + *reg = S5PV210_UPHYCLK_PHYFSEL_12MHZ; + break; + case 24 * MHZ: + *reg = S5PV210_UPHYCLK_PHYFSEL_24MHZ; + break; + case 48 * MHZ: + *reg = S5PV210_UPHYCLK_PHYFSEL_48MHZ; + break; + default: + return -EINVAL; + } + + return 0; +} + +static void s5pv210_isol(struct samsung_usb2_phy_instance *inst, bool on) +{ + struct samsung_usb2_phy_driver *drv = inst->drv; + u32 mask; + + switch (inst->cfg->id) { + case S5PV210_DEVICE: + mask = S5PV210_USB_ISOL_DEVICE; + break; + case S5PV210_HOST: + mask = S5PV210_USB_ISOL_HOST; + break; + default: + return; + } + + regmap_update_bits(drv->reg_pmu, S5PV210_USB_ISOL_OFFSET, + mask, on ? 0 : mask); +} + +static void s5pv210_phy_pwr(struct samsung_usb2_phy_instance *inst, bool on) +{ + struct samsung_usb2_phy_driver *drv = inst->drv; + u32 rstbits = 0; + u32 phypwr = 0; + u32 rst; + u32 pwr; + + switch (inst->cfg->id) { + case S5PV210_DEVICE: + phypwr = S5PV210_UPHYPWR_PHY0; + rstbits = S5PV210_URSTCON_PHY0; + break; + case S5PV210_HOST: + phypwr = S5PV210_UPHYPWR_PHY1; + rstbits = S5PV210_URSTCON_PHY1_ALL | + S5PV210_URSTCON_HOST_LINK_ALL; + break; + } + + if (on) { + writel(drv->ref_reg_val, drv->reg_phy + S5PV210_UPHYCLK); + + pwr = readl(drv->reg_phy + S5PV210_UPHYPWR); + pwr &= ~phypwr; + writel(pwr, drv->reg_phy + S5PV210_UPHYPWR); + + rst = readl(drv->reg_phy + S5PV210_UPHYRST); + rst |= rstbits; + writel(rst, drv->reg_phy + S5PV210_UPHYRST); + udelay(10); + rst &= ~rstbits; + writel(rst, drv->reg_phy + S5PV210_UPHYRST); + /* The following delay is necessary for the reset sequence to be + * completed + */ + udelay(80); + } else { + pwr = readl(drv->reg_phy + S5PV210_UPHYPWR); + pwr |= phypwr; + writel(pwr, drv->reg_phy + S5PV210_UPHYPWR); + } +} + +static int s5pv210_power_on(struct samsung_usb2_phy_instance *inst) +{ + s5pv210_isol(inst, 0); + s5pv210_phy_pwr(inst, 1); + + return 0; +} + +static int s5pv210_power_off(struct samsung_usb2_phy_instance *inst) +{ + s5pv210_phy_pwr(inst, 0); + s5pv210_isol(inst, 1); + + return 0; +} + +static const struct samsung_usb2_common_phy s5pv210_phys[S5PV210_NUM_PHYS] = { + [S5PV210_DEVICE] = { + .label = "device", + .id = S5PV210_DEVICE, + .power_on = s5pv210_power_on, + .power_off = s5pv210_power_off, + }, + [S5PV210_HOST] = { + .label = "host", + .id = S5PV210_HOST, + .power_on = s5pv210_power_on, + .power_off = s5pv210_power_off, + }, +}; + +const struct samsung_usb2_phy_config s5pv210_usb2_phy_config = { + .num_phys = ARRAY_SIZE(s5pv210_phys), + .phys = s5pv210_phys, + .rate_to_clk = s5pv210_rate_to_clk, +}; diff --git a/drivers/phy/samsung/phy-samsung-ufs.c b/drivers/phy/samsung/phy-samsung-ufs.c new file mode 100644 index 0000000000..183c88e3d1 --- /dev/null +++ b/drivers/phy/samsung/phy-samsung-ufs.c @@ -0,0 +1,329 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * UFS PHY driver for Samsung SoC + * + * Copyright (C) 2020 Samsung Electronics Co., Ltd. + * Author: Seungwon Jeon + * Author: Alim Akhtar + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "phy-samsung-ufs.h" + +#define for_each_phy_lane(phy, i) \ + for (i = 0; i < (phy)->lane_cnt; i++) +#define for_each_phy_cfg(cfg) \ + for (; (cfg)->id; (cfg)++) + +#define PHY_DEF_LANE_CNT 1 + +static void samsung_ufs_phy_config(struct samsung_ufs_phy *phy, + const struct samsung_ufs_phy_cfg *cfg, + u8 lane) +{ + enum {LANE_0, LANE_1}; /* lane index */ + + switch (lane) { + case LANE_0: + writel(cfg->val, (phy)->reg_pma + cfg->off_0); + break; + case LANE_1: + if (cfg->id == PHY_TRSV_BLK) + writel(cfg->val, (phy)->reg_pma + cfg->off_1); + break; + } +} + +static int samsung_ufs_phy_wait_for_lock_acq(struct phy *phy) +{ + struct samsung_ufs_phy *ufs_phy = get_samsung_ufs_phy(phy); + const unsigned int timeout_us = 100000; + const unsigned int sleep_us = 10; + u32 val; + int err; + + err = readl_poll_timeout( + ufs_phy->reg_pma + PHY_APB_ADDR(PHY_PLL_LOCK_STATUS), + val, (val & PHY_PLL_LOCK_BIT), sleep_us, timeout_us); + if (err) { + dev_err(ufs_phy->dev, + "failed to get phy pll lock acquisition %d\n", err); + goto out; + } + + err = readl_poll_timeout( + ufs_phy->reg_pma + + PHY_APB_ADDR(ufs_phy->drvdata->cdr_lock_status_offset), + val, (val & PHY_CDR_LOCK_BIT), sleep_us, timeout_us); + if (err) + dev_err(ufs_phy->dev, + "failed to get phy cdr lock acquisition %d\n", err); +out: + return err; +} + +static int samsung_ufs_phy_calibrate(struct phy *phy) +{ + struct samsung_ufs_phy *ufs_phy = get_samsung_ufs_phy(phy); + const struct samsung_ufs_phy_cfg * const *cfgs = ufs_phy->cfgs; + const struct samsung_ufs_phy_cfg *cfg; + int err = 0; + int i; + + if (unlikely(ufs_phy->ufs_phy_state < CFG_PRE_INIT || + ufs_phy->ufs_phy_state >= CFG_TAG_MAX)) { + dev_err(ufs_phy->dev, "invalid phy config index %d\n", ufs_phy->ufs_phy_state); + return -EINVAL; + } + + cfg = cfgs[ufs_phy->ufs_phy_state]; + if (!cfg) + goto out; + + for_each_phy_cfg(cfg) { + for_each_phy_lane(ufs_phy, i) { + samsung_ufs_phy_config(ufs_phy, cfg, i); + } + } + + if (ufs_phy->ufs_phy_state == CFG_POST_PWR_HS) + err = samsung_ufs_phy_wait_for_lock_acq(phy); + + /** + * In Samsung ufshci, PHY need to be calibrated at different + * stages / state mainly before Linkstartup, after Linkstartup, + * before power mode change and after power mode change. + * Below state machine to make sure to calibrate PHY in each + * state. Here after configuring PHY in a given state, will + * change the state to next state so that next state phy + * calibration value can be programed + */ +out: + switch (ufs_phy->ufs_phy_state) { + case CFG_PRE_INIT: + ufs_phy->ufs_phy_state = CFG_POST_INIT; + break; + case CFG_POST_INIT: + ufs_phy->ufs_phy_state = CFG_PRE_PWR_HS; + break; + case CFG_PRE_PWR_HS: + ufs_phy->ufs_phy_state = CFG_POST_PWR_HS; + break; + case CFG_POST_PWR_HS: + /* Change back to INIT state */ + ufs_phy->ufs_phy_state = CFG_PRE_INIT; + break; + default: + dev_err(ufs_phy->dev, "wrong state for phy calibration\n"); + } + + return err; +} + +static int samsung_ufs_phy_clks_init(struct samsung_ufs_phy *phy) +{ + int i; + const struct samsung_ufs_phy_drvdata *drvdata = phy->drvdata; + int num_clks = drvdata->num_clks; + + phy->clks = devm_kcalloc(phy->dev, num_clks, sizeof(*phy->clks), + GFP_KERNEL); + if (!phy->clks) + return -ENOMEM; + + for (i = 0; i < num_clks; i++) + phy->clks[i].id = drvdata->clk_list[i]; + + return devm_clk_bulk_get(phy->dev, num_clks, phy->clks); +} + +static int samsung_ufs_phy_init(struct phy *phy) +{ + struct samsung_ufs_phy *ss_phy = get_samsung_ufs_phy(phy); + + ss_phy->lane_cnt = phy->attrs.bus_width; + ss_phy->ufs_phy_state = CFG_PRE_INIT; + + return 0; +} + +static int samsung_ufs_phy_power_on(struct phy *phy) +{ + struct samsung_ufs_phy *ss_phy = get_samsung_ufs_phy(phy); + int ret; + + samsung_ufs_phy_ctrl_isol(ss_phy, false); + + ret = clk_bulk_prepare_enable(ss_phy->drvdata->num_clks, ss_phy->clks); + if (ret) { + dev_err(ss_phy->dev, "failed to enable ufs phy clocks\n"); + return ret; + } + + if (ss_phy->ufs_phy_state == CFG_PRE_INIT) { + ret = samsung_ufs_phy_calibrate(phy); + if (ret) + dev_err(ss_phy->dev, "ufs phy calibration failed\n"); + } + + return ret; +} + +static int samsung_ufs_phy_power_off(struct phy *phy) +{ + struct samsung_ufs_phy *ss_phy = get_samsung_ufs_phy(phy); + + clk_bulk_disable_unprepare(ss_phy->drvdata->num_clks, ss_phy->clks); + + samsung_ufs_phy_ctrl_isol(ss_phy, true); + + return 0; +} + +static int samsung_ufs_phy_set_mode(struct phy *generic_phy, + enum phy_mode mode, int submode) +{ + struct samsung_ufs_phy *ss_phy = get_samsung_ufs_phy(generic_phy); + + ss_phy->mode = PHY_MODE_INVALID; + + if (mode > 0) + ss_phy->mode = mode; + + return 0; +} + +static int samsung_ufs_phy_exit(struct phy *phy) +{ + struct samsung_ufs_phy *ss_phy = get_samsung_ufs_phy(phy); + + ss_phy->ufs_phy_state = CFG_TAG_MAX; + + return 0; +} + +static const struct phy_ops samsung_ufs_phy_ops = { + .init = samsung_ufs_phy_init, + .exit = samsung_ufs_phy_exit, + .power_on = samsung_ufs_phy_power_on, + .power_off = samsung_ufs_phy_power_off, + .calibrate = samsung_ufs_phy_calibrate, + .set_mode = samsung_ufs_phy_set_mode, + .owner = THIS_MODULE, +}; + +static const struct of_device_id samsung_ufs_phy_match[]; + +static int samsung_ufs_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + const struct of_device_id *match; + struct samsung_ufs_phy *phy; + struct phy *gen_phy; + struct phy_provider *phy_provider; + const struct samsung_ufs_phy_drvdata *drvdata; + u32 isol_offset; + int err = 0; + + match = of_match_node(samsung_ufs_phy_match, dev->of_node); + if (!match) { + err = -EINVAL; + dev_err(dev, "failed to get match_node\n"); + goto out; + } + + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); + if (!phy) { + err = -ENOMEM; + goto out; + } + + phy->reg_pma = devm_platform_ioremap_resource_byname(pdev, "phy-pma"); + if (IS_ERR(phy->reg_pma)) { + err = PTR_ERR(phy->reg_pma); + goto out; + } + + phy->reg_pmu = syscon_regmap_lookup_by_phandle( + dev->of_node, "samsung,pmu-syscon"); + if (IS_ERR(phy->reg_pmu)) { + err = PTR_ERR(phy->reg_pmu); + dev_err(dev, "failed syscon remap for pmu\n"); + goto out; + } + + gen_phy = devm_phy_create(dev, NULL, &samsung_ufs_phy_ops); + if (IS_ERR(gen_phy)) { + err = PTR_ERR(gen_phy); + dev_err(dev, "failed to create PHY for ufs-phy\n"); + goto out; + } + + drvdata = match->data; + phy->dev = dev; + phy->drvdata = drvdata; + phy->cfgs = drvdata->cfgs; + memcpy(&phy->isol, &drvdata->isol, sizeof(phy->isol)); + + if (!of_property_read_u32_index(dev->of_node, "samsung,pmu-syscon", 1, + &isol_offset)) + phy->isol.offset = isol_offset; + + phy->lane_cnt = PHY_DEF_LANE_CNT; + + err = samsung_ufs_phy_clks_init(phy); + if (err) { + dev_err(dev, "failed to get phy clocks\n"); + goto out; + } + + phy_set_drvdata(gen_phy, phy); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (IS_ERR(phy_provider)) { + err = PTR_ERR(phy_provider); + dev_err(dev, "failed to register phy-provider\n"); + goto out; + } +out: + return err; +} + +static const struct of_device_id samsung_ufs_phy_match[] = { + { + .compatible = "samsung,exynos7-ufs-phy", + .data = &exynos7_ufs_phy, + }, { + .compatible = "samsung,exynosautov9-ufs-phy", + .data = &exynosautov9_ufs_phy, + }, { + .compatible = "tesla,fsd-ufs-phy", + .data = &fsd_ufs_phy, + }, + {}, +}; +MODULE_DEVICE_TABLE(of, samsung_ufs_phy_match); + +static struct platform_driver samsung_ufs_phy_driver = { + .probe = samsung_ufs_phy_probe, + .driver = { + .name = "samsung-ufs-phy", + .of_match_table = samsung_ufs_phy_match, + }, +}; +module_platform_driver(samsung_ufs_phy_driver); +MODULE_DESCRIPTION("Samsung SoC UFS PHY Driver"); +MODULE_AUTHOR("Seungwon Jeon "); +MODULE_AUTHOR("Alim Akhtar "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/samsung/phy-samsung-ufs.h b/drivers/phy/samsung/phy-samsung-ufs.h new file mode 100644 index 0000000000..e122960cfe --- /dev/null +++ b/drivers/phy/samsung/phy-samsung-ufs.h @@ -0,0 +1,146 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * UFS PHY driver for Samsung EXYNOS SoC + * + * Copyright (C) 2020 Samsung Electronics Co., Ltd. + * Author: Seungwon Jeon + * Author: Alim Akhtar + * + */ +#ifndef _PHY_SAMSUNG_UFS_ +#define _PHY_SAMSUNG_UFS_ + +#include +#include + +#define PHY_COMN_BLK 1 +#define PHY_TRSV_BLK 2 +#define END_UFS_PHY_CFG { 0 } +#define PHY_TRSV_CH_OFFSET 0x30 +#define PHY_APB_ADDR(off) ((off) << 2) + +#define PHY_COMN_REG_CFG(o, v, d) { \ + .off_0 = PHY_APB_ADDR((o)), \ + .off_1 = 0, \ + .val = (v), \ + .desc = (d), \ + .id = PHY_COMN_BLK, \ +} + +#define PHY_TRSV_REG_CFG_OFFSET(o, v, d, c) { \ + .off_0 = PHY_APB_ADDR((o)), \ + .off_1 = PHY_APB_ADDR((o) + (c)), \ + .val = (v), \ + .desc = (d), \ + .id = PHY_TRSV_BLK, \ +} + +#define PHY_TRSV_REG_CFG(o, v, d) \ + PHY_TRSV_REG_CFG_OFFSET(o, v, d, PHY_TRSV_CH_OFFSET) + +/* UFS PHY registers */ +#define PHY_PLL_LOCK_STATUS 0x1e + +#define PHY_PLL_LOCK_BIT BIT(5) +#define PHY_CDR_LOCK_BIT BIT(4) + +/* description for PHY calibration */ +enum { + /* applicable to any */ + PWR_DESC_ANY = 0, + /* mode */ + PWR_DESC_PWM = 1, + PWR_DESC_HS = 2, + /* series */ + PWR_DESC_SER_A = 1, + PWR_DESC_SER_B = 2, + /* gear */ + PWR_DESC_G1 = 1, + PWR_DESC_G2 = 2, + PWR_DESC_G3 = 3, + /* field mask */ + MD_MASK = 0x3, + SR_MASK = 0x3, + GR_MASK = 0x7, +}; + +#define PWR_MODE_HS_G1_ANY PWR_MODE_HS(PWR_DESC_G1, PWR_DESC_ANY) +#define PWR_MODE_HS_G1_SER_A PWR_MODE_HS(PWR_DESC_G1, PWR_DESC_SER_A) +#define PWR_MODE_HS_G1_SER_B PWR_MODE_HS(PWR_DESC_G1, PWR_DESC_SER_B) +#define PWR_MODE_HS_G2_ANY PWR_MODE_HS(PWR_DESC_G2, PWR_DESC_ANY) +#define PWR_MODE_HS_G2_SER_A PWR_MODE_HS(PWR_DESC_G2, PWR_DESC_SER_A) +#define PWR_MODE_HS_G2_SER_B PWR_MODE_HS(PWR_DESC_G2, PWR_DESC_SER_B) +#define PWR_MODE_HS_G3_ANY PWR_MODE_HS(PWR_DESC_G3, PWR_DESC_ANY) +#define PWR_MODE_HS_G3_SER_A PWR_MODE_HS(PWR_DESC_G3, PWR_DESC_SER_A) +#define PWR_MODE_HS_G3_SER_B PWR_MODE_HS(PWR_DESC_G3, PWR_DESC_SER_B) +#define PWR_MODE(g, s, m) ((((g) & GR_MASK) << 4) |\ + (((s) & SR_MASK) << 2) | ((m) & MD_MASK)) +#define PWR_MODE_PWM_ANY PWR_MODE(PWR_DESC_ANY,\ + PWR_DESC_ANY, PWR_DESC_PWM) +#define PWR_MODE_HS(g, s) ((((g) & GR_MASK) << 4) |\ + (((s) & SR_MASK) << 2) | PWR_DESC_HS) +#define PWR_MODE_HS_ANY PWR_MODE(PWR_DESC_ANY,\ + PWR_DESC_ANY, PWR_DESC_HS) +#define PWR_MODE_ANY PWR_MODE(PWR_DESC_ANY,\ + PWR_DESC_ANY, PWR_DESC_ANY) +/* PHY calibration point/state */ +enum { + CFG_PRE_INIT, + CFG_POST_INIT, + CFG_PRE_PWR_HS, + CFG_POST_PWR_HS, + CFG_TAG_MAX, +}; + +struct samsung_ufs_phy_cfg { + u32 off_0; + u32 off_1; + u32 val; + u8 desc; + u8 id; +}; + +struct samsung_ufs_phy_pmu_isol { + u32 offset; + u32 mask; + u32 en; +}; + +struct samsung_ufs_phy_drvdata { + const struct samsung_ufs_phy_cfg **cfgs; + struct samsung_ufs_phy_pmu_isol isol; + const char * const *clk_list; + int num_clks; + u32 cdr_lock_status_offset; +}; + +struct samsung_ufs_phy { + struct device *dev; + void __iomem *reg_pma; + struct regmap *reg_pmu; + struct clk_bulk_data *clks; + const struct samsung_ufs_phy_drvdata *drvdata; + const struct samsung_ufs_phy_cfg * const *cfgs; + struct samsung_ufs_phy_pmu_isol isol; + u8 lane_cnt; + int ufs_phy_state; + enum phy_mode mode; +}; + +static inline struct samsung_ufs_phy *get_samsung_ufs_phy(struct phy *phy) +{ + return (struct samsung_ufs_phy *)phy_get_drvdata(phy); +} + +static inline void samsung_ufs_phy_ctrl_isol( + struct samsung_ufs_phy *phy, u32 isol) +{ + regmap_update_bits(phy->reg_pmu, phy->isol.offset, + phy->isol.mask, isol ? 0 : phy->isol.en); +} + +extern const struct samsung_ufs_phy_drvdata exynos7_ufs_phy; +extern const struct samsung_ufs_phy_drvdata exynosautov9_ufs_phy; +extern const struct samsung_ufs_phy_drvdata fsd_ufs_phy; + +#endif /* _PHY_SAMSUNG_UFS_ */ diff --git a/drivers/phy/samsung/phy-samsung-usb2.c b/drivers/phy/samsung/phy-samsung-usb2.c new file mode 100644 index 0000000000..68a174eca0 --- /dev/null +++ b/drivers/phy/samsung/phy-samsung-usb2.c @@ -0,0 +1,261 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Samsung SoC USB 1.1/2.0 PHY driver + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Author: Kamil Debski + */ + +#include +#include +#include +#include +#include +#include +#include +#include "phy-samsung-usb2.h" + +static int samsung_usb2_phy_power_on(struct phy *phy) +{ + struct samsung_usb2_phy_instance *inst = phy_get_drvdata(phy); + struct samsung_usb2_phy_driver *drv = inst->drv; + int ret; + + dev_dbg(drv->dev, "Request to power_on \"%s\" usb phy\n", + inst->cfg->label); + + if (drv->vbus) { + ret = regulator_enable(drv->vbus); + if (ret) + goto err_regulator; + } + + ret = clk_prepare_enable(drv->clk); + if (ret) + goto err_main_clk; + ret = clk_prepare_enable(drv->ref_clk); + if (ret) + goto err_instance_clk; + if (inst->cfg->power_on) { + spin_lock(&drv->lock); + ret = inst->cfg->power_on(inst); + spin_unlock(&drv->lock); + if (ret) + goto err_power_on; + } + + return 0; + +err_power_on: + clk_disable_unprepare(drv->ref_clk); +err_instance_clk: + clk_disable_unprepare(drv->clk); +err_main_clk: + if (drv->vbus) + regulator_disable(drv->vbus); +err_regulator: + return ret; +} + +static int samsung_usb2_phy_power_off(struct phy *phy) +{ + struct samsung_usb2_phy_instance *inst = phy_get_drvdata(phy); + struct samsung_usb2_phy_driver *drv = inst->drv; + int ret = 0; + + dev_dbg(drv->dev, "Request to power_off \"%s\" usb phy\n", + inst->cfg->label); + if (inst->cfg->power_off) { + spin_lock(&drv->lock); + ret = inst->cfg->power_off(inst); + spin_unlock(&drv->lock); + if (ret) + return ret; + } + clk_disable_unprepare(drv->ref_clk); + clk_disable_unprepare(drv->clk); + if (drv->vbus) + ret = regulator_disable(drv->vbus); + + return ret; +} + +static const struct phy_ops samsung_usb2_phy_ops = { + .power_on = samsung_usb2_phy_power_on, + .power_off = samsung_usb2_phy_power_off, + .owner = THIS_MODULE, +}; + +static struct phy *samsung_usb2_phy_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct samsung_usb2_phy_driver *drv; + + drv = dev_get_drvdata(dev); + if (!drv) + return ERR_PTR(-EINVAL); + + if (WARN_ON(args->args[0] >= drv->cfg->num_phys)) + return ERR_PTR(-ENODEV); + + return drv->instances[args->args[0]].phy; +} + +static const struct of_device_id samsung_usb2_phy_of_match[] = { +#ifdef CONFIG_PHY_EXYNOS4X12_USB2 + { + .compatible = "samsung,exynos3250-usb2-phy", + .data = &exynos3250_usb2_phy_config, + }, +#endif +#ifdef CONFIG_PHY_EXYNOS4210_USB2 + { + .compatible = "samsung,exynos4210-usb2-phy", + .data = &exynos4210_usb2_phy_config, + }, +#endif +#ifdef CONFIG_PHY_EXYNOS4X12_USB2 + { + .compatible = "samsung,exynos4x12-usb2-phy", + .data = &exynos4x12_usb2_phy_config, + }, +#endif +#ifdef CONFIG_PHY_EXYNOS5250_USB2 + { + .compatible = "samsung,exynos5250-usb2-phy", + .data = &exynos5250_usb2_phy_config, + }, + { + .compatible = "samsung,exynos5420-usb2-phy", + .data = &exynos5420_usb2_phy_config, + }, +#endif +#ifdef CONFIG_PHY_S5PV210_USB2 + { + .compatible = "samsung,s5pv210-usb2-phy", + .data = &s5pv210_usb2_phy_config, + }, +#endif + { }, +}; +MODULE_DEVICE_TABLE(of, samsung_usb2_phy_of_match); + +static int samsung_usb2_phy_probe(struct platform_device *pdev) +{ + const struct samsung_usb2_phy_config *cfg; + struct device *dev = &pdev->dev; + struct phy_provider *phy_provider; + struct samsung_usb2_phy_driver *drv; + int i, ret; + + if (!pdev->dev.of_node) { + dev_err(dev, "This driver is required to be instantiated from device tree\n"); + return -EINVAL; + } + + cfg = of_device_get_match_data(dev); + if (!cfg) + return -EINVAL; + + drv = devm_kzalloc(dev, struct_size(drv, instances, cfg->num_phys), + GFP_KERNEL); + if (!drv) + return -ENOMEM; + + dev_set_drvdata(dev, drv); + spin_lock_init(&drv->lock); + + drv->cfg = cfg; + drv->dev = dev; + + drv->reg_phy = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(drv->reg_phy)) { + dev_err(dev, "Failed to map register memory (phy)\n"); + return PTR_ERR(drv->reg_phy); + } + + drv->reg_pmu = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, + "samsung,pmureg-phandle"); + if (IS_ERR(drv->reg_pmu)) { + dev_err(dev, "Failed to map PMU registers (via syscon)\n"); + return PTR_ERR(drv->reg_pmu); + } + + if (drv->cfg->has_mode_switch) { + drv->reg_sys = syscon_regmap_lookup_by_phandle( + pdev->dev.of_node, "samsung,sysreg-phandle"); + if (IS_ERR(drv->reg_sys)) { + dev_err(dev, "Failed to map system registers (via syscon)\n"); + return PTR_ERR(drv->reg_sys); + } + } + + drv->clk = devm_clk_get(dev, "phy"); + if (IS_ERR(drv->clk)) { + dev_err(dev, "Failed to get clock of phy controller\n"); + return PTR_ERR(drv->clk); + } + + drv->ref_clk = devm_clk_get(dev, "ref"); + if (IS_ERR(drv->ref_clk)) { + dev_err(dev, "Failed to get reference clock for the phy controller\n"); + return PTR_ERR(drv->ref_clk); + } + + drv->ref_rate = clk_get_rate(drv->ref_clk); + if (drv->cfg->rate_to_clk) { + ret = drv->cfg->rate_to_clk(drv->ref_rate, &drv->ref_reg_val); + if (ret) + return ret; + } + + drv->vbus = devm_regulator_get(dev, "vbus"); + if (IS_ERR(drv->vbus)) { + ret = PTR_ERR(drv->vbus); + if (ret == -EPROBE_DEFER) + return ret; + drv->vbus = NULL; + } + + for (i = 0; i < drv->cfg->num_phys; i++) { + char *label = drv->cfg->phys[i].label; + struct samsung_usb2_phy_instance *p = &drv->instances[i]; + + dev_dbg(dev, "Creating phy \"%s\"\n", label); + p->phy = devm_phy_create(dev, NULL, &samsung_usb2_phy_ops); + if (IS_ERR(p->phy)) { + dev_err(drv->dev, "Failed to create usb2_phy \"%s\"\n", + label); + return PTR_ERR(p->phy); + } + + p->cfg = &drv->cfg->phys[i]; + p->drv = drv; + phy_set_bus_width(p->phy, 8); + phy_set_drvdata(p->phy, p); + } + + phy_provider = devm_of_phy_provider_register(dev, + samsung_usb2_phy_xlate); + if (IS_ERR(phy_provider)) { + dev_err(drv->dev, "Failed to register phy provider\n"); + return PTR_ERR(phy_provider); + } + + return 0; +} + +static struct platform_driver samsung_usb2_phy_driver = { + .probe = samsung_usb2_phy_probe, + .driver = { + .of_match_table = samsung_usb2_phy_of_match, + .name = "samsung-usb2-phy", + .suppress_bind_attrs = true, + } +}; + +module_platform_driver(samsung_usb2_phy_driver); +MODULE_DESCRIPTION("Samsung S5P/Exynos SoC USB PHY driver"); +MODULE_AUTHOR("Kamil Debski "); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:samsung-usb2-phy"); diff --git a/drivers/phy/samsung/phy-samsung-usb2.h b/drivers/phy/samsung/phy-samsung-usb2.h new file mode 100644 index 0000000000..ebaf43bfc5 --- /dev/null +++ b/drivers/phy/samsung/phy-samsung-usb2.h @@ -0,0 +1,71 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Samsung SoC USB 1.1/2.0 PHY driver + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Author: Kamil Debski + */ + +#ifndef _PHY_EXYNOS_USB2_H +#define _PHY_EXYNOS_USB2_H + +#include +#include +#include +#include +#include +#include + +#define KHZ 1000 +#define MHZ (KHZ * KHZ) + +struct samsung_usb2_phy_driver; +struct samsung_usb2_phy_instance; +struct samsung_usb2_phy_config; + +struct samsung_usb2_phy_instance { + const struct samsung_usb2_common_phy *cfg; + struct phy *phy; + struct samsung_usb2_phy_driver *drv; + int int_cnt; + int ext_cnt; +}; + +struct samsung_usb2_phy_driver { + const struct samsung_usb2_phy_config *cfg; + struct clk *clk; + struct clk *ref_clk; + struct regulator *vbus; + unsigned long ref_rate; + u32 ref_reg_val; + struct device *dev; + void __iomem *reg_phy; + struct regmap *reg_pmu; + struct regmap *reg_sys; + spinlock_t lock; + struct samsung_usb2_phy_instance instances[]; +}; + +struct samsung_usb2_common_phy { + int (*power_on)(struct samsung_usb2_phy_instance *); + int (*power_off)(struct samsung_usb2_phy_instance *); + unsigned int id; + char *label; +}; + + +struct samsung_usb2_phy_config { + const struct samsung_usb2_common_phy *phys; + int (*rate_to_clk)(unsigned long, u32 *); + unsigned int num_phys; + bool has_mode_switch; + bool has_refclk_sel; +}; + +extern const struct samsung_usb2_phy_config exynos3250_usb2_phy_config; +extern const struct samsung_usb2_phy_config exynos4210_usb2_phy_config; +extern const struct samsung_usb2_phy_config exynos4x12_usb2_phy_config; +extern const struct samsung_usb2_phy_config exynos5250_usb2_phy_config; +extern const struct samsung_usb2_phy_config exynos5420_usb2_phy_config; +extern const struct samsung_usb2_phy_config s5pv210_usb2_phy_config; +#endif -- cgit v1.2.3