From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- drivers/regulator/core.c | 6288 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 6288 insertions(+) create mode 100644 drivers/regulator/core.c (limited to 'drivers/regulator/core.c') diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c new file mode 100644 index 000000000..3137e40fc --- /dev/null +++ b/drivers/regulator/core.c @@ -0,0 +1,6288 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// +// core.c -- Voltage/Current Regulator framework. +// +// Copyright 2007, 2008 Wolfson Microelectronics PLC. +// Copyright 2008 SlimLogic Ltd. +// +// Author: Liam Girdwood + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define CREATE_TRACE_POINTS +#include + +#include "dummy.h" +#include "internal.h" + +static DEFINE_WW_CLASS(regulator_ww_class); +static DEFINE_MUTEX(regulator_nesting_mutex); +static DEFINE_MUTEX(regulator_list_mutex); +static LIST_HEAD(regulator_map_list); +static LIST_HEAD(regulator_ena_gpio_list); +static LIST_HEAD(regulator_supply_alias_list); +static LIST_HEAD(regulator_coupler_list); +static bool has_full_constraints; + +static struct dentry *debugfs_root; + +/* + * struct regulator_map + * + * Used to provide symbolic supply names to devices. + */ +struct regulator_map { + struct list_head list; + const char *dev_name; /* The dev_name() for the consumer */ + const char *supply; + struct regulator_dev *regulator; +}; + +/* + * struct regulator_enable_gpio + * + * Management for shared enable GPIO pin + */ +struct regulator_enable_gpio { + struct list_head list; + struct gpio_desc *gpiod; + u32 enable_count; /* a number of enabled shared GPIO */ + u32 request_count; /* a number of requested shared GPIO */ +}; + +/* + * struct regulator_supply_alias + * + * Used to map lookups for a supply onto an alternative device. + */ +struct regulator_supply_alias { + struct list_head list; + struct device *src_dev; + const char *src_supply; + struct device *alias_dev; + const char *alias_supply; +}; + +static int _regulator_is_enabled(struct regulator_dev *rdev); +static int _regulator_disable(struct regulator *regulator); +static int _regulator_get_error_flags(struct regulator_dev *rdev, unsigned int *flags); +static int _regulator_get_current_limit(struct regulator_dev *rdev); +static unsigned int _regulator_get_mode(struct regulator_dev *rdev); +static int _notifier_call_chain(struct regulator_dev *rdev, + unsigned long event, void *data); +static int _regulator_do_set_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV); +static int regulator_balance_voltage(struct regulator_dev *rdev, + suspend_state_t state); +static struct regulator *create_regulator(struct regulator_dev *rdev, + struct device *dev, + const char *supply_name); +static void destroy_regulator(struct regulator *regulator); +static void _regulator_put(struct regulator *regulator); + +const char *rdev_get_name(struct regulator_dev *rdev) +{ + if (rdev->constraints && rdev->constraints->name) + return rdev->constraints->name; + else if (rdev->desc->name) + return rdev->desc->name; + else + return ""; +} +EXPORT_SYMBOL_GPL(rdev_get_name); + +static bool have_full_constraints(void) +{ + return has_full_constraints || of_have_populated_dt(); +} + +static bool regulator_ops_is_valid(struct regulator_dev *rdev, int ops) +{ + if (!rdev->constraints) { + rdev_err(rdev, "no constraints\n"); + return false; + } + + if (rdev->constraints->valid_ops_mask & ops) + return true; + + return false; +} + +/** + * regulator_lock_nested - lock a single regulator + * @rdev: regulator source + * @ww_ctx: w/w mutex acquire context + * + * This function can be called many times by one task on + * a single regulator and its mutex will be locked only + * once. If a task, which is calling this function is other + * than the one, which initially locked the mutex, it will + * wait on mutex. + */ +static inline int regulator_lock_nested(struct regulator_dev *rdev, + struct ww_acquire_ctx *ww_ctx) +{ + bool lock = false; + int ret = 0; + + mutex_lock(®ulator_nesting_mutex); + + if (!ww_mutex_trylock(&rdev->mutex, ww_ctx)) { + if (rdev->mutex_owner == current) + rdev->ref_cnt++; + else + lock = true; + + if (lock) { + mutex_unlock(®ulator_nesting_mutex); + ret = ww_mutex_lock(&rdev->mutex, ww_ctx); + mutex_lock(®ulator_nesting_mutex); + } + } else { + lock = true; + } + + if (lock && ret != -EDEADLK) { + rdev->ref_cnt++; + rdev->mutex_owner = current; + } + + mutex_unlock(®ulator_nesting_mutex); + + return ret; +} + +/** + * regulator_lock - lock a single regulator + * @rdev: regulator source + * + * This function can be called many times by one task on + * a single regulator and its mutex will be locked only + * once. If a task, which is calling this function is other + * than the one, which initially locked the mutex, it will + * wait on mutex. + */ +static void regulator_lock(struct regulator_dev *rdev) +{ + regulator_lock_nested(rdev, NULL); +} + +/** + * regulator_unlock - unlock a single regulator + * @rdev: regulator_source + * + * This function unlocks the mutex when the + * reference counter reaches 0. + */ +static void regulator_unlock(struct regulator_dev *rdev) +{ + mutex_lock(®ulator_nesting_mutex); + + if (--rdev->ref_cnt == 0) { + rdev->mutex_owner = NULL; + ww_mutex_unlock(&rdev->mutex); + } + + WARN_ON_ONCE(rdev->ref_cnt < 0); + + mutex_unlock(®ulator_nesting_mutex); +} + +/** + * regulator_lock_two - lock two regulators + * @rdev1: first regulator + * @rdev2: second regulator + * @ww_ctx: w/w mutex acquire context + * + * Locks both rdevs using the regulator_ww_class. + */ +static void regulator_lock_two(struct regulator_dev *rdev1, + struct regulator_dev *rdev2, + struct ww_acquire_ctx *ww_ctx) +{ + struct regulator_dev *held, *contended; + int ret; + + ww_acquire_init(ww_ctx, ®ulator_ww_class); + + /* Try to just grab both of them */ + ret = regulator_lock_nested(rdev1, ww_ctx); + WARN_ON(ret); + ret = regulator_lock_nested(rdev2, ww_ctx); + if (ret != -EDEADLOCK) { + WARN_ON(ret); + goto exit; + } + + held = rdev1; + contended = rdev2; + while (true) { + regulator_unlock(held); + + ww_mutex_lock_slow(&contended->mutex, ww_ctx); + contended->ref_cnt++; + contended->mutex_owner = current; + swap(held, contended); + ret = regulator_lock_nested(contended, ww_ctx); + + if (ret != -EDEADLOCK) { + WARN_ON(ret); + break; + } + } + +exit: + ww_acquire_done(ww_ctx); +} + +/** + * regulator_unlock_two - unlock two regulators + * @rdev1: first regulator + * @rdev2: second regulator + * @ww_ctx: w/w mutex acquire context + * + * The inverse of regulator_lock_two(). + */ + +static void regulator_unlock_two(struct regulator_dev *rdev1, + struct regulator_dev *rdev2, + struct ww_acquire_ctx *ww_ctx) +{ + regulator_unlock(rdev2); + regulator_unlock(rdev1); + ww_acquire_fini(ww_ctx); +} + +static bool regulator_supply_is_couple(struct regulator_dev *rdev) +{ + struct regulator_dev *c_rdev; + int i; + + for (i = 1; i < rdev->coupling_desc.n_coupled; i++) { + c_rdev = rdev->coupling_desc.coupled_rdevs[i]; + + if (rdev->supply->rdev == c_rdev) + return true; + } + + return false; +} + +static void regulator_unlock_recursive(struct regulator_dev *rdev, + unsigned int n_coupled) +{ + struct regulator_dev *c_rdev, *supply_rdev; + int i, supply_n_coupled; + + for (i = n_coupled; i > 0; i--) { + c_rdev = rdev->coupling_desc.coupled_rdevs[i - 1]; + + if (!c_rdev) + continue; + + if (c_rdev->supply && !regulator_supply_is_couple(c_rdev)) { + supply_rdev = c_rdev->supply->rdev; + supply_n_coupled = supply_rdev->coupling_desc.n_coupled; + + regulator_unlock_recursive(supply_rdev, + supply_n_coupled); + } + + regulator_unlock(c_rdev); + } +} + +static int regulator_lock_recursive(struct regulator_dev *rdev, + struct regulator_dev **new_contended_rdev, + struct regulator_dev **old_contended_rdev, + struct ww_acquire_ctx *ww_ctx) +{ + struct regulator_dev *c_rdev; + int i, err; + + for (i = 0; i < rdev->coupling_desc.n_coupled; i++) { + c_rdev = rdev->coupling_desc.coupled_rdevs[i]; + + if (!c_rdev) + continue; + + if (c_rdev != *old_contended_rdev) { + err = regulator_lock_nested(c_rdev, ww_ctx); + if (err) { + if (err == -EDEADLK) { + *new_contended_rdev = c_rdev; + goto err_unlock; + } + + /* shouldn't happen */ + WARN_ON_ONCE(err != -EALREADY); + } + } else { + *old_contended_rdev = NULL; + } + + if (c_rdev->supply && !regulator_supply_is_couple(c_rdev)) { + err = regulator_lock_recursive(c_rdev->supply->rdev, + new_contended_rdev, + old_contended_rdev, + ww_ctx); + if (err) { + regulator_unlock(c_rdev); + goto err_unlock; + } + } + } + + return 0; + +err_unlock: + regulator_unlock_recursive(rdev, i); + + return err; +} + +/** + * regulator_unlock_dependent - unlock regulator's suppliers and coupled + * regulators + * @rdev: regulator source + * @ww_ctx: w/w mutex acquire context + * + * Unlock all regulators related with rdev by coupling or supplying. + */ +static void regulator_unlock_dependent(struct regulator_dev *rdev, + struct ww_acquire_ctx *ww_ctx) +{ + regulator_unlock_recursive(rdev, rdev->coupling_desc.n_coupled); + ww_acquire_fini(ww_ctx); +} + +/** + * regulator_lock_dependent - lock regulator's suppliers and coupled regulators + * @rdev: regulator source + * @ww_ctx: w/w mutex acquire context + * + * This function as a wrapper on regulator_lock_recursive(), which locks + * all regulators related with rdev by coupling or supplying. + */ +static void regulator_lock_dependent(struct regulator_dev *rdev, + struct ww_acquire_ctx *ww_ctx) +{ + struct regulator_dev *new_contended_rdev = NULL; + struct regulator_dev *old_contended_rdev = NULL; + int err; + + mutex_lock(®ulator_list_mutex); + + ww_acquire_init(ww_ctx, ®ulator_ww_class); + + do { + if (new_contended_rdev) { + ww_mutex_lock_slow(&new_contended_rdev->mutex, ww_ctx); + old_contended_rdev = new_contended_rdev; + old_contended_rdev->ref_cnt++; + old_contended_rdev->mutex_owner = current; + } + + err = regulator_lock_recursive(rdev, + &new_contended_rdev, + &old_contended_rdev, + ww_ctx); + + if (old_contended_rdev) + regulator_unlock(old_contended_rdev); + + } while (err == -EDEADLK); + + ww_acquire_done(ww_ctx); + + mutex_unlock(®ulator_list_mutex); +} + +/** + * of_get_child_regulator - get a child regulator device node + * based on supply name + * @parent: Parent device node + * @prop_name: Combination regulator supply name and "-supply" + * + * Traverse all child nodes. + * Extract the child regulator device node corresponding to the supply name. + * returns the device node corresponding to the regulator if found, else + * returns NULL. + */ +static struct device_node *of_get_child_regulator(struct device_node *parent, + const char *prop_name) +{ + struct device_node *regnode = NULL; + struct device_node *child = NULL; + + for_each_child_of_node(parent, child) { + regnode = of_parse_phandle(child, prop_name, 0); + + if (!regnode) { + regnode = of_get_child_regulator(child, prop_name); + if (regnode) + goto err_node_put; + } else { + goto err_node_put; + } + } + return NULL; + +err_node_put: + of_node_put(child); + return regnode; +} + +/** + * of_get_regulator - get a regulator device node based on supply name + * @dev: Device pointer for the consumer (of regulator) device + * @supply: regulator supply name + * + * Extract the regulator device node corresponding to the supply name. + * returns the device node corresponding to the regulator if found, else + * returns NULL. + */ +static struct device_node *of_get_regulator(struct device *dev, const char *supply) +{ + struct device_node *regnode = NULL; + char prop_name[64]; /* 64 is max size of property name */ + + dev_dbg(dev, "Looking up %s-supply from device tree\n", supply); + + snprintf(prop_name, 64, "%s-supply", supply); + regnode = of_parse_phandle(dev->of_node, prop_name, 0); + + if (!regnode) { + regnode = of_get_child_regulator(dev->of_node, prop_name); + if (regnode) + return regnode; + + dev_dbg(dev, "Looking up %s property in node %pOF failed\n", + prop_name, dev->of_node); + return NULL; + } + return regnode; +} + +/* Platform voltage constraint check */ +int regulator_check_voltage(struct regulator_dev *rdev, + int *min_uV, int *max_uV) +{ + BUG_ON(*min_uV > *max_uV); + + if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_VOLTAGE)) { + rdev_err(rdev, "voltage operation not allowed\n"); + return -EPERM; + } + + if (*max_uV > rdev->constraints->max_uV) + *max_uV = rdev->constraints->max_uV; + if (*min_uV < rdev->constraints->min_uV) + *min_uV = rdev->constraints->min_uV; + + if (*min_uV > *max_uV) { + rdev_err(rdev, "unsupportable voltage range: %d-%duV\n", + *min_uV, *max_uV); + return -EINVAL; + } + + return 0; +} + +/* return 0 if the state is valid */ +static int regulator_check_states(suspend_state_t state) +{ + return (state > PM_SUSPEND_MAX || state == PM_SUSPEND_TO_IDLE); +} + +/* Make sure we select a voltage that suits the needs of all + * regulator consumers + */ +int regulator_check_consumers(struct regulator_dev *rdev, + int *min_uV, int *max_uV, + suspend_state_t state) +{ + struct regulator *regulator; + struct regulator_voltage *voltage; + + list_for_each_entry(regulator, &rdev->consumer_list, list) { + voltage = ®ulator->voltage[state]; + /* + * Assume consumers that didn't say anything are OK + * with anything in the constraint range. + */ + if (!voltage->min_uV && !voltage->max_uV) + continue; + + if (*max_uV > voltage->max_uV) + *max_uV = voltage->max_uV; + if (*min_uV < voltage->min_uV) + *min_uV = voltage->min_uV; + } + + if (*min_uV > *max_uV) { + rdev_err(rdev, "Restricting voltage, %u-%uuV\n", + *min_uV, *max_uV); + return -EINVAL; + } + + return 0; +} + +/* current constraint check */ +static int regulator_check_current_limit(struct regulator_dev *rdev, + int *min_uA, int *max_uA) +{ + BUG_ON(*min_uA > *max_uA); + + if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_CURRENT)) { + rdev_err(rdev, "current operation not allowed\n"); + return -EPERM; + } + + if (*max_uA > rdev->constraints->max_uA) + *max_uA = rdev->constraints->max_uA; + if (*min_uA < rdev->constraints->min_uA) + *min_uA = rdev->constraints->min_uA; + + if (*min_uA > *max_uA) { + rdev_err(rdev, "unsupportable current range: %d-%duA\n", + *min_uA, *max_uA); + return -EINVAL; + } + + return 0; +} + +/* operating mode constraint check */ +static int regulator_mode_constrain(struct regulator_dev *rdev, + unsigned int *mode) +{ + switch (*mode) { + case REGULATOR_MODE_FAST: + case REGULATOR_MODE_NORMAL: + case REGULATOR_MODE_IDLE: + case REGULATOR_MODE_STANDBY: + break; + default: + rdev_err(rdev, "invalid mode %x specified\n", *mode); + return -EINVAL; + } + + if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_MODE)) { + rdev_err(rdev, "mode operation not allowed\n"); + return -EPERM; + } + + /* The modes are bitmasks, the most power hungry modes having + * the lowest values. If the requested mode isn't supported + * try higher modes. + */ + while (*mode) { + if (rdev->constraints->valid_modes_mask & *mode) + return 0; + *mode /= 2; + } + + return -EINVAL; +} + +static inline struct regulator_state * +regulator_get_suspend_state(struct regulator_dev *rdev, suspend_state_t state) +{ + if (rdev->constraints == NULL) + return NULL; + + switch (state) { + case PM_SUSPEND_STANDBY: + return &rdev->constraints->state_standby; + case PM_SUSPEND_MEM: + return &rdev->constraints->state_mem; + case PM_SUSPEND_MAX: + return &rdev->constraints->state_disk; + default: + return NULL; + } +} + +static const struct regulator_state * +regulator_get_suspend_state_check(struct regulator_dev *rdev, suspend_state_t state) +{ + const struct regulator_state *rstate; + + rstate = regulator_get_suspend_state(rdev, state); + if (rstate == NULL) + return NULL; + + /* If we have no suspend mode configuration don't set anything; + * only warn if the driver implements set_suspend_voltage or + * set_suspend_mode callback. + */ + if (rstate->enabled != ENABLE_IN_SUSPEND && + rstate->enabled != DISABLE_IN_SUSPEND) { + if (rdev->desc->ops->set_suspend_voltage || + rdev->desc->ops->set_suspend_mode) + rdev_warn(rdev, "No configuration\n"); + return NULL; + } + + return rstate; +} + +static ssize_t microvolts_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = dev_get_drvdata(dev); + int uV; + + regulator_lock(rdev); + uV = regulator_get_voltage_rdev(rdev); + regulator_unlock(rdev); + + if (uV < 0) + return uV; + return sprintf(buf, "%d\n", uV); +} +static DEVICE_ATTR_RO(microvolts); + +static ssize_t microamps_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = dev_get_drvdata(dev); + + return sprintf(buf, "%d\n", _regulator_get_current_limit(rdev)); +} +static DEVICE_ATTR_RO(microamps); + +static ssize_t name_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct regulator_dev *rdev = dev_get_drvdata(dev); + + return sprintf(buf, "%s\n", rdev_get_name(rdev)); +} +static DEVICE_ATTR_RO(name); + +static const char *regulator_opmode_to_str(int mode) +{ + switch (mode) { + case REGULATOR_MODE_FAST: + return "fast"; + case REGULATOR_MODE_NORMAL: + return "normal"; + case REGULATOR_MODE_IDLE: + return "idle"; + case REGULATOR_MODE_STANDBY: + return "standby"; + } + return "unknown"; +} + +static ssize_t regulator_print_opmode(char *buf, int mode) +{ + return sprintf(buf, "%s\n", regulator_opmode_to_str(mode)); +} + +static ssize_t opmode_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = dev_get_drvdata(dev); + + return regulator_print_opmode(buf, _regulator_get_mode(rdev)); +} +static DEVICE_ATTR_RO(opmode); + +static ssize_t regulator_print_state(char *buf, int state) +{ + if (state > 0) + return sprintf(buf, "enabled\n"); + else if (state == 0) + return sprintf(buf, "disabled\n"); + else + return sprintf(buf, "unknown\n"); +} + +static ssize_t state_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = dev_get_drvdata(dev); + ssize_t ret; + + regulator_lock(rdev); + ret = regulator_print_state(buf, _regulator_is_enabled(rdev)); + regulator_unlock(rdev); + + return ret; +} +static DEVICE_ATTR_RO(state); + +static ssize_t status_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = dev_get_drvdata(dev); + int status; + char *label; + + status = rdev->desc->ops->get_status(rdev); + if (status < 0) + return status; + + switch (status) { + case REGULATOR_STATUS_OFF: + label = "off"; + break; + case REGULATOR_STATUS_ON: + label = "on"; + break; + case REGULATOR_STATUS_ERROR: + label = "error"; + break; + case REGULATOR_STATUS_FAST: + label = "fast"; + break; + case REGULATOR_STATUS_NORMAL: + label = "normal"; + break; + case REGULATOR_STATUS_IDLE: + label = "idle"; + break; + case REGULATOR_STATUS_STANDBY: + label = "standby"; + break; + case REGULATOR_STATUS_BYPASS: + label = "bypass"; + break; + case REGULATOR_STATUS_UNDEFINED: + label = "undefined"; + break; + default: + return -ERANGE; + } + + return sprintf(buf, "%s\n", label); +} +static DEVICE_ATTR_RO(status); + +static ssize_t min_microamps_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = dev_get_drvdata(dev); + + if (!rdev->constraints) + return sprintf(buf, "constraint not defined\n"); + + return sprintf(buf, "%d\n", rdev->constraints->min_uA); +} +static DEVICE_ATTR_RO(min_microamps); + +static ssize_t max_microamps_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = dev_get_drvdata(dev); + + if (!rdev->constraints) + return sprintf(buf, "constraint not defined\n"); + + return sprintf(buf, "%d\n", rdev->constraints->max_uA); +} +static DEVICE_ATTR_RO(max_microamps); + +static ssize_t min_microvolts_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = dev_get_drvdata(dev); + + if (!rdev->constraints) + return sprintf(buf, "constraint not defined\n"); + + return sprintf(buf, "%d\n", rdev->constraints->min_uV); +} +static DEVICE_ATTR_RO(min_microvolts); + +static ssize_t max_microvolts_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = dev_get_drvdata(dev); + + if (!rdev->constraints) + return sprintf(buf, "constraint not defined\n"); + + return sprintf(buf, "%d\n", rdev->constraints->max_uV); +} +static DEVICE_ATTR_RO(max_microvolts); + +static ssize_t requested_microamps_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = dev_get_drvdata(dev); + struct regulator *regulator; + int uA = 0; + + regulator_lock(rdev); + list_for_each_entry(regulator, &rdev->consumer_list, list) { + if (regulator->enable_count) + uA += regulator->uA_load; + } + regulator_unlock(rdev); + return sprintf(buf, "%d\n", uA); +} +static DEVICE_ATTR_RO(requested_microamps); + +static ssize_t num_users_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct regulator_dev *rdev = dev_get_drvdata(dev); + return sprintf(buf, "%d\n", rdev->use_count); +} +static DEVICE_ATTR_RO(num_users); + +static ssize_t type_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct regulator_dev *rdev = dev_get_drvdata(dev); + + switch (rdev->desc->type) { + case REGULATOR_VOLTAGE: + return sprintf(buf, "voltage\n"); + case REGULATOR_CURRENT: + return sprintf(buf, "current\n"); + } + return sprintf(buf, "unknown\n"); +} +static DEVICE_ATTR_RO(type); + +static ssize_t suspend_mem_microvolts_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = dev_get_drvdata(dev); + + return sprintf(buf, "%d\n", rdev->constraints->state_mem.uV); +} +static DEVICE_ATTR_RO(suspend_mem_microvolts); + +static ssize_t suspend_disk_microvolts_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = dev_get_drvdata(dev); + + return sprintf(buf, "%d\n", rdev->constraints->state_disk.uV); +} +static DEVICE_ATTR_RO(suspend_disk_microvolts); + +static ssize_t suspend_standby_microvolts_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = dev_get_drvdata(dev); + + return sprintf(buf, "%d\n", rdev->constraints->state_standby.uV); +} +static DEVICE_ATTR_RO(suspend_standby_microvolts); + +static ssize_t suspend_mem_mode_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = dev_get_drvdata(dev); + + return regulator_print_opmode(buf, + rdev->constraints->state_mem.mode); +} +static DEVICE_ATTR_RO(suspend_mem_mode); + +static ssize_t suspend_disk_mode_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = dev_get_drvdata(dev); + + return regulator_print_opmode(buf, + rdev->constraints->state_disk.mode); +} +static DEVICE_ATTR_RO(suspend_disk_mode); + +static ssize_t suspend_standby_mode_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = dev_get_drvdata(dev); + + return regulator_print_opmode(buf, + rdev->constraints->state_standby.mode); +} +static DEVICE_ATTR_RO(suspend_standby_mode); + +static ssize_t suspend_mem_state_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = dev_get_drvdata(dev); + + return regulator_print_state(buf, + rdev->constraints->state_mem.enabled); +} +static DEVICE_ATTR_RO(suspend_mem_state); + +static ssize_t suspend_disk_state_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = dev_get_drvdata(dev); + + return regulator_print_state(buf, + rdev->constraints->state_disk.enabled); +} +static DEVICE_ATTR_RO(suspend_disk_state); + +static ssize_t suspend_standby_state_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = dev_get_drvdata(dev); + + return regulator_print_state(buf, + rdev->constraints->state_standby.enabled); +} +static DEVICE_ATTR_RO(suspend_standby_state); + +static ssize_t bypass_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = dev_get_drvdata(dev); + const char *report; + bool bypass; + int ret; + + ret = rdev->desc->ops->get_bypass(rdev, &bypass); + + if (ret != 0) + report = "unknown"; + else if (bypass) + report = "enabled"; + else + report = "disabled"; + + return sprintf(buf, "%s\n", report); +} +static DEVICE_ATTR_RO(bypass); + +#define REGULATOR_ERROR_ATTR(name, bit) \ + static ssize_t name##_show(struct device *dev, struct device_attribute *attr, \ + char *buf) \ + { \ + int ret; \ + unsigned int flags; \ + struct regulator_dev *rdev = dev_get_drvdata(dev); \ + ret = _regulator_get_error_flags(rdev, &flags); \ + if (ret) \ + return ret; \ + return sysfs_emit(buf, "%d\n", !!(flags & (bit))); \ + } \ + static DEVICE_ATTR_RO(name) + +REGULATOR_ERROR_ATTR(under_voltage, REGULATOR_ERROR_UNDER_VOLTAGE); +REGULATOR_ERROR_ATTR(over_current, REGULATOR_ERROR_OVER_CURRENT); +REGULATOR_ERROR_ATTR(regulation_out, REGULATOR_ERROR_REGULATION_OUT); +REGULATOR_ERROR_ATTR(fail, REGULATOR_ERROR_FAIL); +REGULATOR_ERROR_ATTR(over_temp, REGULATOR_ERROR_OVER_TEMP); +REGULATOR_ERROR_ATTR(under_voltage_warn, REGULATOR_ERROR_UNDER_VOLTAGE_WARN); +REGULATOR_ERROR_ATTR(over_current_warn, REGULATOR_ERROR_OVER_CURRENT_WARN); +REGULATOR_ERROR_ATTR(over_voltage_warn, REGULATOR_ERROR_OVER_VOLTAGE_WARN); +REGULATOR_ERROR_ATTR(over_temp_warn, REGULATOR_ERROR_OVER_TEMP_WARN); + +/* Calculate the new optimum regulator operating mode based on the new total + * consumer load. All locks held by caller + */ +static int drms_uA_update(struct regulator_dev *rdev) +{ + struct regulator *sibling; + int current_uA = 0, output_uV, input_uV, err; + unsigned int mode; + + /* + * first check to see if we can set modes at all, otherwise just + * tell the consumer everything is OK. + */ + if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_DRMS)) { + rdev_dbg(rdev, "DRMS operation not allowed\n"); + return 0; + } + + if (!rdev->desc->ops->get_optimum_mode && + !rdev->desc->ops->set_load) + return 0; + + if (!rdev->desc->ops->set_mode && + !rdev->desc->ops->set_load) + return -EINVAL; + + /* calc total requested load */ + list_for_each_entry(sibling, &rdev->consumer_list, list) { + if (sibling->enable_count) + current_uA += sibling->uA_load; + } + + current_uA += rdev->constraints->system_load; + + if (rdev->desc->ops->set_load) { + /* set the optimum mode for our new total regulator load */ + err = rdev->desc->ops->set_load(rdev, current_uA); + if (err < 0) + rdev_err(rdev, "failed to set load %d: %pe\n", + current_uA, ERR_PTR(err)); + } else { + /* + * Unfortunately in some cases the constraints->valid_ops has + * REGULATOR_CHANGE_DRMS but there are no valid modes listed. + * That's not really legit but we won't consider it a fatal + * error here. We'll treat it as if REGULATOR_CHANGE_DRMS + * wasn't set. + */ + if (!rdev->constraints->valid_modes_mask) { + rdev_dbg(rdev, "Can change modes; but no valid mode\n"); + return 0; + } + + /* get output voltage */ + output_uV = regulator_get_voltage_rdev(rdev); + + /* + * Don't return an error; if regulator driver cares about + * output_uV then it's up to the driver to validate. + */ + if (output_uV <= 0) + rdev_dbg(rdev, "invalid output voltage found\n"); + + /* get input voltage */ + input_uV = 0; + if (rdev->supply) + input_uV = regulator_get_voltage_rdev(rdev->supply->rdev); + if (input_uV <= 0) + input_uV = rdev->constraints->input_uV; + + /* + * Don't return an error; if regulator driver cares about + * input_uV then it's up to the driver to validate. + */ + if (input_uV <= 0) + rdev_dbg(rdev, "invalid input voltage found\n"); + + /* now get the optimum mode for our new total regulator load */ + mode = rdev->desc->ops->get_optimum_mode(rdev, input_uV, + output_uV, current_uA); + + /* check the new mode is allowed */ + err = regulator_mode_constrain(rdev, &mode); + if (err < 0) { + rdev_err(rdev, "failed to get optimum mode @ %d uA %d -> %d uV: %pe\n", + current_uA, input_uV, output_uV, ERR_PTR(err)); + return err; + } + + err = rdev->desc->ops->set_mode(rdev, mode); + if (err < 0) + rdev_err(rdev, "failed to set optimum mode %x: %pe\n", + mode, ERR_PTR(err)); + } + + return err; +} + +static int __suspend_set_state(struct regulator_dev *rdev, + const struct regulator_state *rstate) +{ + int ret = 0; + + if (rstate->enabled == ENABLE_IN_SUSPEND && + rdev->desc->ops->set_suspend_enable) + ret = rdev->desc->ops->set_suspend_enable(rdev); + else if (rstate->enabled == DISABLE_IN_SUSPEND && + rdev->desc->ops->set_suspend_disable) + ret = rdev->desc->ops->set_suspend_disable(rdev); + else /* OK if set_suspend_enable or set_suspend_disable is NULL */ + ret = 0; + + if (ret < 0) { + rdev_err(rdev, "failed to enabled/disable: %pe\n", ERR_PTR(ret)); + return ret; + } + + if (rdev->desc->ops->set_suspend_voltage && rstate->uV > 0) { + ret = rdev->desc->ops->set_suspend_voltage(rdev, rstate->uV); + if (ret < 0) { + rdev_err(rdev, "failed to set voltage: %pe\n", ERR_PTR(ret)); + return ret; + } + } + + if (rdev->desc->ops->set_suspend_mode && rstate->mode > 0) { + ret = rdev->desc->ops->set_suspend_mode(rdev, rstate->mode); + if (ret < 0) { + rdev_err(rdev, "failed to set mode: %pe\n", ERR_PTR(ret)); + return ret; + } + } + + return ret; +} + +static int suspend_set_initial_state(struct regulator_dev *rdev) +{ + const struct regulator_state *rstate; + + rstate = regulator_get_suspend_state_check(rdev, + rdev->constraints->initial_state); + if (!rstate) + return 0; + + return __suspend_set_state(rdev, rstate); +} + +#if defined(DEBUG) || defined(CONFIG_DYNAMIC_DEBUG) +static void print_constraints_debug(struct regulator_dev *rdev) +{ + struct regulation_constraints *constraints = rdev->constraints; + char buf[160] = ""; + size_t len = sizeof(buf) - 1; + int count = 0; + int ret; + + if (constraints->min_uV && constraints->max_uV) { + if (constraints->min_uV == constraints->max_uV) + count += scnprintf(buf + count, len - count, "%d mV ", + constraints->min_uV / 1000); + else + count += scnprintf(buf + count, len - count, + "%d <--> %d mV ", + constraints->min_uV / 1000, + constraints->max_uV / 1000); + } + + if (!constraints->min_uV || + constraints->min_uV != constraints->max_uV) { + ret = regulator_get_voltage_rdev(rdev); + if (ret > 0) + count += scnprintf(buf + count, len - count, + "at %d mV ", ret / 1000); + } + + if (constraints->uV_offset) + count += scnprintf(buf + count, len - count, "%dmV offset ", + constraints->uV_offset / 1000); + + if (constraints->min_uA && constraints->max_uA) { + if (constraints->min_uA == constraints->max_uA) + count += scnprintf(buf + count, len - count, "%d mA ", + constraints->min_uA / 1000); + else + count += scnprintf(buf + count, len - count, + "%d <--> %d mA ", + constraints->min_uA / 1000, + constraints->max_uA / 1000); + } + + if (!constraints->min_uA || + constraints->min_uA != constraints->max_uA) { + ret = _regulator_get_current_limit(rdev); + if (ret > 0) + count += scnprintf(buf + count, len - count, + "at %d mA ", ret / 1000); + } + + if (constraints->valid_modes_mask & REGULATOR_MODE_FAST) + count += scnprintf(buf + count, len - count, "fast "); + if (constraints->valid_modes_mask & REGULATOR_MODE_NORMAL) + count += scnprintf(buf + count, len - count, "normal "); + if (constraints->valid_modes_mask & REGULATOR_MODE_IDLE) + count += scnprintf(buf + count, len - count, "idle "); + if (constraints->valid_modes_mask & REGULATOR_MODE_STANDBY) + count += scnprintf(buf + count, len - count, "standby "); + + if (!count) + count = scnprintf(buf, len, "no parameters"); + else + --count; + + count += scnprintf(buf + count, len - count, ", %s", + _regulator_is_enabled(rdev) ? "enabled" : "disabled"); + + rdev_dbg(rdev, "%s\n", buf); +} +#else /* !DEBUG && !CONFIG_DYNAMIC_DEBUG */ +static inline void print_constraints_debug(struct regulator_dev *rdev) {} +#endif /* !DEBUG && !CONFIG_DYNAMIC_DEBUG */ + +static void print_constraints(struct regulator_dev *rdev) +{ + struct regulation_constraints *constraints = rdev->constraints; + + print_constraints_debug(rdev); + + if ((constraints->min_uV != constraints->max_uV) && + !regulator_ops_is_valid(rdev, REGULATOR_CHANGE_VOLTAGE)) + rdev_warn(rdev, + "Voltage range but no REGULATOR_CHANGE_VOLTAGE\n"); +} + +static int machine_constraints_voltage(struct regulator_dev *rdev, + struct regulation_constraints *constraints) +{ + const struct regulator_ops *ops = rdev->desc->ops; + int ret; + + /* do we need to apply the constraint voltage */ + if (rdev->constraints->apply_uV && + rdev->constraints->min_uV && rdev->constraints->max_uV) { + int target_min, target_max; + int current_uV = regulator_get_voltage_rdev(rdev); + + if (current_uV == -ENOTRECOVERABLE) { + /* This regulator can't be read and must be initialized */ + rdev_info(rdev, "Setting %d-%duV\n", + rdev->constraints->min_uV, + rdev->constraints->max_uV); + _regulator_do_set_voltage(rdev, + rdev->constraints->min_uV, + rdev->constraints->max_uV); + current_uV = regulator_get_voltage_rdev(rdev); + } + + if (current_uV < 0) { + if (current_uV != -EPROBE_DEFER) + rdev_err(rdev, + "failed to get the current voltage: %pe\n", + ERR_PTR(current_uV)); + return current_uV; + } + + /* + * If we're below the minimum voltage move up to the + * minimum voltage, if we're above the maximum voltage + * then move down to the maximum. + */ + target_min = current_uV; + target_max = current_uV; + + if (current_uV < rdev->constraints->min_uV) { + target_min = rdev->constraints->min_uV; + target_max = rdev->constraints->min_uV; + } + + if (current_uV > rdev->constraints->max_uV) { + target_min = rdev->constraints->max_uV; + target_max = rdev->constraints->max_uV; + } + + if (target_min != current_uV || target_max != current_uV) { + rdev_info(rdev, "Bringing %duV into %d-%duV\n", + current_uV, target_min, target_max); + ret = _regulator_do_set_voltage( + rdev, target_min, target_max); + if (ret < 0) { + rdev_err(rdev, + "failed to apply %d-%duV constraint: %pe\n", + target_min, target_max, ERR_PTR(ret)); + return ret; + } + } + } + + /* constrain machine-level voltage specs to fit + * the actual range supported by this regulator. + */ + if (ops->list_voltage && rdev->desc->n_voltages) { + int count = rdev->desc->n_voltages; + int i; + int min_uV = INT_MAX; + int max_uV = INT_MIN; + int cmin = constraints->min_uV; + int cmax = constraints->max_uV; + + /* it's safe to autoconfigure fixed-voltage supplies + * and the constraints are used by list_voltage. + */ + if (count == 1 && !cmin) { + cmin = 1; + cmax = INT_MAX; + constraints->min_uV = cmin; + constraints->max_uV = cmax; + } + + /* voltage constraints are optional */ + if ((cmin == 0) && (cmax == 0)) + return 0; + + /* else require explicit machine-level constraints */ + if (cmin <= 0 || cmax <= 0 || cmax < cmin) { + rdev_err(rdev, "invalid voltage constraints\n"); + return -EINVAL; + } + + /* no need to loop voltages if range is continuous */ + if (rdev->desc->continuous_voltage_range) + return 0; + + /* initial: [cmin..cmax] valid, [min_uV..max_uV] not */ + for (i = 0; i < count; i++) { + int value; + + value = ops->list_voltage(rdev, i); + if (value <= 0) + continue; + + /* maybe adjust [min_uV..max_uV] */ + if (value >= cmin && value < min_uV) + min_uV = value; + if (value <= cmax && value > max_uV) + max_uV = value; + } + + /* final: [min_uV..max_uV] valid iff constraints valid */ + if (max_uV < min_uV) { + rdev_err(rdev, + "unsupportable voltage constraints %u-%uuV\n", + min_uV, max_uV); + return -EINVAL; + } + + /* use regulator's subset of machine constraints */ + if (constraints->min_uV < min_uV) { + rdev_dbg(rdev, "override min_uV, %d -> %d\n", + constraints->min_uV, min_uV); + constraints->min_uV = min_uV; + } + if (constraints->max_uV > max_uV) { + rdev_dbg(rdev, "override max_uV, %d -> %d\n", + constraints->max_uV, max_uV); + constraints->max_uV = max_uV; + } + } + + return 0; +} + +static int machine_constraints_current(struct regulator_dev *rdev, + struct regulation_constraints *constraints) +{ + const struct regulator_ops *ops = rdev->desc->ops; + int ret; + + if (!constraints->min_uA && !constraints->max_uA) + return 0; + + if (constraints->min_uA > constraints->max_uA) { + rdev_err(rdev, "Invalid current constraints\n"); + return -EINVAL; + } + + if (!ops->set_current_limit || !ops->get_current_limit) { + rdev_warn(rdev, "Operation of current configuration missing\n"); + return 0; + } + + /* Set regulator current in constraints range */ + ret = ops->set_current_limit(rdev, constraints->min_uA, + constraints->max_uA); + if (ret < 0) { + rdev_err(rdev, "Failed to set current constraint, %d\n", ret); + return ret; + } + + return 0; +} + +static int _regulator_do_enable(struct regulator_dev *rdev); + +static int notif_set_limit(struct regulator_dev *rdev, + int (*set)(struct regulator_dev *, int, int, bool), + int limit, int severity) +{ + bool enable; + + if (limit == REGULATOR_NOTIF_LIMIT_DISABLE) { + enable = false; + limit = 0; + } else { + enable = true; + } + + if (limit == REGULATOR_NOTIF_LIMIT_ENABLE) + limit = 0; + + return set(rdev, limit, severity, enable); +} + +static int handle_notify_limits(struct regulator_dev *rdev, + int (*set)(struct regulator_dev *, int, int, bool), + struct notification_limit *limits) +{ + int ret = 0; + + if (!set) + return -EOPNOTSUPP; + + if (limits->prot) + ret = notif_set_limit(rdev, set, limits->prot, + REGULATOR_SEVERITY_PROT); + if (ret) + return ret; + + if (limits->err) + ret = notif_set_limit(rdev, set, limits->err, + REGULATOR_SEVERITY_ERR); + if (ret) + return ret; + + if (limits->warn) + ret = notif_set_limit(rdev, set, limits->warn, + REGULATOR_SEVERITY_WARN); + + return ret; +} +/** + * set_machine_constraints - sets regulator constraints + * @rdev: regulator source + * + * Allows platform initialisation code to define and constrain + * regulator circuits e.g. valid voltage/current ranges, etc. NOTE: + * Constraints *must* be set by platform code in order for some + * regulator operations to proceed i.e. set_voltage, set_current_limit, + * set_mode. + */ +static int set_machine_constraints(struct regulator_dev *rdev) +{ + int ret = 0; + const struct regulator_ops *ops = rdev->desc->ops; + + ret = machine_constraints_voltage(rdev, rdev->constraints); + if (ret != 0) + return ret; + + ret = machine_constraints_current(rdev, rdev->constraints); + if (ret != 0) + return ret; + + if (rdev->constraints->ilim_uA && ops->set_input_current_limit) { + ret = ops->set_input_current_limit(rdev, + rdev->constraints->ilim_uA); + if (ret < 0) { + rdev_err(rdev, "failed to set input limit: %pe\n", ERR_PTR(ret)); + return ret; + } + } + + /* do we need to setup our suspend state */ + if (rdev->constraints->initial_state) { + ret = suspend_set_initial_state(rdev); + if (ret < 0) { + rdev_err(rdev, "failed to set suspend state: %pe\n", ERR_PTR(ret)); + return ret; + } + } + + if (rdev->constraints->initial_mode) { + if (!ops->set_mode) { + rdev_err(rdev, "no set_mode operation\n"); + return -EINVAL; + } + + ret = ops->set_mode(rdev, rdev->constraints->initial_mode); + if (ret < 0) { + rdev_err(rdev, "failed to set initial mode: %pe\n", ERR_PTR(ret)); + return ret; + } + } else if (rdev->constraints->system_load) { + /* + * We'll only apply the initial system load if an + * initial mode wasn't specified. + */ + drms_uA_update(rdev); + } + + if ((rdev->constraints->ramp_delay || rdev->constraints->ramp_disable) + && ops->set_ramp_delay) { + ret = ops->set_ramp_delay(rdev, rdev->constraints->ramp_delay); + if (ret < 0) { + rdev_err(rdev, "failed to set ramp_delay: %pe\n", ERR_PTR(ret)); + return ret; + } + } + + if (rdev->constraints->pull_down && ops->set_pull_down) { + ret = ops->set_pull_down(rdev); + if (ret < 0) { + rdev_err(rdev, "failed to set pull down: %pe\n", ERR_PTR(ret)); + return ret; + } + } + + if (rdev->constraints->soft_start && ops->set_soft_start) { + ret = ops->set_soft_start(rdev); + if (ret < 0) { + rdev_err(rdev, "failed to set soft start: %pe\n", ERR_PTR(ret)); + return ret; + } + } + + /* + * Existing logic does not warn if over_current_protection is given as + * a constraint but driver does not support that. I think we should + * warn about this type of issues as it is possible someone changes + * PMIC on board to another type - and the another PMIC's driver does + * not support setting protection. Board composer may happily believe + * the DT limits are respected - especially if the new PMIC HW also + * supports protection but the driver does not. I won't change the logic + * without hearing more experienced opinion on this though. + * + * If warning is seen as a good idea then we can merge handling the + * over-curret protection and detection and get rid of this special + * handling. + */ + if (rdev->constraints->over_current_protection + && ops->set_over_current_protection) { + int lim = rdev->constraints->over_curr_limits.prot; + + ret = ops->set_over_current_protection(rdev, lim, + REGULATOR_SEVERITY_PROT, + true); + if (ret < 0) { + rdev_err(rdev, "failed to set over current protection: %pe\n", + ERR_PTR(ret)); + return ret; + } + } + + if (rdev->constraints->over_current_detection) + ret = handle_notify_limits(rdev, + ops->set_over_current_protection, + &rdev->constraints->over_curr_limits); + if (ret) { + if (ret != -EOPNOTSUPP) { + rdev_err(rdev, "failed to set over current limits: %pe\n", + ERR_PTR(ret)); + return ret; + } + rdev_warn(rdev, + "IC does not support requested over-current limits\n"); + } + + if (rdev->constraints->over_voltage_detection) + ret = handle_notify_limits(rdev, + ops->set_over_voltage_protection, + &rdev->constraints->over_voltage_limits); + if (ret) { + if (ret != -EOPNOTSUPP) { + rdev_err(rdev, "failed to set over voltage limits %pe\n", + ERR_PTR(ret)); + return ret; + } + rdev_warn(rdev, + "IC does not support requested over voltage limits\n"); + } + + if (rdev->constraints->under_voltage_detection) + ret = handle_notify_limits(rdev, + ops->set_under_voltage_protection, + &rdev->constraints->under_voltage_limits); + if (ret) { + if (ret != -EOPNOTSUPP) { + rdev_err(rdev, "failed to set under voltage limits %pe\n", + ERR_PTR(ret)); + return ret; + } + rdev_warn(rdev, + "IC does not support requested under voltage limits\n"); + } + + if (rdev->constraints->over_temp_detection) + ret = handle_notify_limits(rdev, + ops->set_thermal_protection, + &rdev->constraints->temp_limits); + if (ret) { + if (ret != -EOPNOTSUPP) { + rdev_err(rdev, "failed to set temperature limits %pe\n", + ERR_PTR(ret)); + return ret; + } + rdev_warn(rdev, + "IC does not support requested temperature limits\n"); + } + + if (rdev->constraints->active_discharge && ops->set_active_discharge) { + bool ad_state = (rdev->constraints->active_discharge == + REGULATOR_ACTIVE_DISCHARGE_ENABLE) ? true : false; + + ret = ops->set_active_discharge(rdev, ad_state); + if (ret < 0) { + rdev_err(rdev, "failed to set active discharge: %pe\n", ERR_PTR(ret)); + return ret; + } + } + + /* + * If there is no mechanism for controlling the regulator then + * flag it as always_on so we don't end up duplicating checks + * for this so much. Note that we could control the state of + * a supply to control the output on a regulator that has no + * direct control. + */ + if (!rdev->ena_pin && !ops->enable) { + if (rdev->supply_name && !rdev->supply) + return -EPROBE_DEFER; + + if (rdev->supply) + rdev->constraints->always_on = + rdev->supply->rdev->constraints->always_on; + else + rdev->constraints->always_on = true; + } + + /* If the constraints say the regulator should be on at this point + * and we have control then make sure it is enabled. + */ + if (rdev->constraints->always_on || rdev->constraints->boot_on) { + /* If we want to enable this regulator, make sure that we know + * the supplying regulator. + */ + if (rdev->supply_name && !rdev->supply) + return -EPROBE_DEFER; + + /* If supplying regulator has already been enabled, + * it's not intended to have use_count increment + * when rdev is only boot-on. + */ + if (rdev->supply && + (rdev->constraints->always_on || + !regulator_is_enabled(rdev->supply))) { + ret = regulator_enable(rdev->supply); + if (ret < 0) { + _regulator_put(rdev->supply); + rdev->supply = NULL; + return ret; + } + } + + ret = _regulator_do_enable(rdev); + if (ret < 0 && ret != -EINVAL) { + rdev_err(rdev, "failed to enable: %pe\n", ERR_PTR(ret)); + return ret; + } + + if (rdev->constraints->always_on) + rdev->use_count++; + } else if (rdev->desc->off_on_delay) { + rdev->last_off = ktime_get(); + } + + print_constraints(rdev); + return 0; +} + +/** + * set_supply - set regulator supply regulator + * @rdev: regulator (locked) + * @supply_rdev: supply regulator (locked)) + * + * Called by platform initialisation code to set the supply regulator for this + * regulator. This ensures that a regulators supply will also be enabled by the + * core if it's child is enabled. + */ +static int set_supply(struct regulator_dev *rdev, + struct regulator_dev *supply_rdev) +{ + int err; + + rdev_dbg(rdev, "supplied by %s\n", rdev_get_name(supply_rdev)); + + if (!try_module_get(supply_rdev->owner)) + return -ENODEV; + + rdev->supply = create_regulator(supply_rdev, &rdev->dev, "SUPPLY"); + if (rdev->supply == NULL) { + module_put(supply_rdev->owner); + err = -ENOMEM; + return err; + } + supply_rdev->open_count++; + + return 0; +} + +/** + * set_consumer_device_supply - Bind a regulator to a symbolic supply + * @rdev: regulator source + * @consumer_dev_name: dev_name() string for device supply applies to + * @supply: symbolic name for supply + * + * Allows platform initialisation code to map physical regulator + * sources to symbolic names for supplies for use by devices. Devices + * should use these symbolic names to request regulators, avoiding the + * need to provide board-specific regulator names as platform data. + */ +static int set_consumer_device_supply(struct regulator_dev *rdev, + const char *consumer_dev_name, + const char *supply) +{ + struct regulator_map *node, *new_node; + int has_dev; + + if (supply == NULL) + return -EINVAL; + + if (consumer_dev_name != NULL) + has_dev = 1; + else + has_dev = 0; + + new_node = kzalloc(sizeof(struct regulator_map), GFP_KERNEL); + if (new_node == NULL) + return -ENOMEM; + + new_node->regulator = rdev; + new_node->supply = supply; + + if (has_dev) { + new_node->dev_name = kstrdup(consumer_dev_name, GFP_KERNEL); + if (new_node->dev_name == NULL) { + kfree(new_node); + return -ENOMEM; + } + } + + mutex_lock(®ulator_list_mutex); + list_for_each_entry(node, ®ulator_map_list, list) { + if (node->dev_name && consumer_dev_name) { + if (strcmp(node->dev_name, consumer_dev_name) != 0) + continue; + } else if (node->dev_name || consumer_dev_name) { + continue; + } + + if (strcmp(node->supply, supply) != 0) + continue; + + pr_debug("%s: %s/%s is '%s' supply; fail %s/%s\n", + consumer_dev_name, + dev_name(&node->regulator->dev), + node->regulator->desc->name, + supply, + dev_name(&rdev->dev), rdev_get_name(rdev)); + goto fail; + } + + list_add(&new_node->list, ®ulator_map_list); + mutex_unlock(®ulator_list_mutex); + + return 0; + +fail: + mutex_unlock(®ulator_list_mutex); + kfree(new_node->dev_name); + kfree(new_node); + return -EBUSY; +} + +static void unset_regulator_supplies(struct regulator_dev *rdev) +{ + struct regulator_map *node, *n; + + list_for_each_entry_safe(node, n, ®ulator_map_list, list) { + if (rdev == node->regulator) { + list_del(&node->list); + kfree(node->dev_name); + kfree(node); + } + } +} + +#ifdef CONFIG_DEBUG_FS +static ssize_t constraint_flags_read_file(struct file *file, + char __user *user_buf, + size_t count, loff_t *ppos) +{ + const struct regulator *regulator = file->private_data; + const struct regulation_constraints *c = regulator->rdev->constraints; + char *buf; + ssize_t ret; + + if (!c) + return 0; + + buf = kmalloc(PAGE_SIZE, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + ret = snprintf(buf, PAGE_SIZE, + "always_on: %u\n" + "boot_on: %u\n" + "apply_uV: %u\n" + "ramp_disable: %u\n" + "soft_start: %u\n" + "pull_down: %u\n" + "over_current_protection: %u\n", + c->always_on, + c->boot_on, + c->apply_uV, + c->ramp_disable, + c->soft_start, + c->pull_down, + c->over_current_protection); + + ret = simple_read_from_buffer(user_buf, count, ppos, buf, ret); + kfree(buf); + + return ret; +} + +#endif + +static const struct file_operations constraint_flags_fops = { +#ifdef CONFIG_DEBUG_FS + .open = simple_open, + .read = constraint_flags_read_file, + .llseek = default_llseek, +#endif +}; + +#define REG_STR_SIZE 64 + +static struct regulator *create_regulator(struct regulator_dev *rdev, + struct device *dev, + const char *supply_name) +{ + struct regulator *regulator; + int err = 0; + + lockdep_assert_held_once(&rdev->mutex.base); + + if (dev) { + char buf[REG_STR_SIZE]; + int size; + + size = snprintf(buf, REG_STR_SIZE, "%s-%s", + dev->kobj.name, supply_name); + if (size >= REG_STR_SIZE) + return NULL; + + supply_name = kstrdup(buf, GFP_KERNEL); + if (supply_name == NULL) + return NULL; + } else { + supply_name = kstrdup_const(supply_name, GFP_KERNEL); + if (supply_name == NULL) + return NULL; + } + + regulator = kzalloc(sizeof(*regulator), GFP_KERNEL); + if (regulator == NULL) { + kfree_const(supply_name); + return NULL; + } + + regulator->rdev = rdev; + regulator->supply_name = supply_name; + + list_add(®ulator->list, &rdev->consumer_list); + + if (dev) { + regulator->dev = dev; + + /* Add a link to the device sysfs entry */ + err = sysfs_create_link_nowarn(&rdev->dev.kobj, &dev->kobj, + supply_name); + if (err) { + rdev_dbg(rdev, "could not add device link %s: %pe\n", + dev->kobj.name, ERR_PTR(err)); + /* non-fatal */ + } + } + + if (err != -EEXIST) + regulator->debugfs = debugfs_create_dir(supply_name, rdev->debugfs); + if (IS_ERR(regulator->debugfs)) + rdev_dbg(rdev, "Failed to create debugfs directory\n"); + + debugfs_create_u32("uA_load", 0444, regulator->debugfs, + ®ulator->uA_load); + debugfs_create_u32("min_uV", 0444, regulator->debugfs, + ®ulator->voltage[PM_SUSPEND_ON].min_uV); + debugfs_create_u32("max_uV", 0444, regulator->debugfs, + ®ulator->voltage[PM_SUSPEND_ON].max_uV); + debugfs_create_file("constraint_flags", 0444, regulator->debugfs, + regulator, &constraint_flags_fops); + + /* + * Check now if the regulator is an always on regulator - if + * it is then we don't need to do nearly so much work for + * enable/disable calls. + */ + if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_STATUS) && + _regulator_is_enabled(rdev)) + regulator->always_on = true; + + return regulator; +} + +static int _regulator_get_enable_time(struct regulator_dev *rdev) +{ + if (rdev->constraints && rdev->constraints->enable_time) + return rdev->constraints->enable_time; + if (rdev->desc->ops->enable_time) + return rdev->desc->ops->enable_time(rdev); + return rdev->desc->enable_time; +} + +static struct regulator_supply_alias *regulator_find_supply_alias( + struct device *dev, const char *supply) +{ + struct regulator_supply_alias *map; + + list_for_each_entry(map, ®ulator_supply_alias_list, list) + if (map->src_dev == dev && strcmp(map->src_supply, supply) == 0) + return map; + + return NULL; +} + +static void regulator_supply_alias(struct device **dev, const char **supply) +{ + struct regulator_supply_alias *map; + + map = regulator_find_supply_alias(*dev, *supply); + if (map) { + dev_dbg(*dev, "Mapping supply %s to %s,%s\n", + *supply, map->alias_supply, + dev_name(map->alias_dev)); + *dev = map->alias_dev; + *supply = map->alias_supply; + } +} + +static int regulator_match(struct device *dev, const void *data) +{ + struct regulator_dev *r = dev_to_rdev(dev); + + return strcmp(rdev_get_name(r), data) == 0; +} + +static struct regulator_dev *regulator_lookup_by_name(const char *name) +{ + struct device *dev; + + dev = class_find_device(®ulator_class, NULL, name, regulator_match); + + return dev ? dev_to_rdev(dev) : NULL; +} + +/** + * regulator_dev_lookup - lookup a regulator device. + * @dev: device for regulator "consumer". + * @supply: Supply name or regulator ID. + * + * If successful, returns a struct regulator_dev that corresponds to the name + * @supply and with the embedded struct device refcount incremented by one. + * The refcount must be dropped by calling put_device(). + * On failure one of the following ERR-PTR-encoded values is returned: + * -ENODEV if lookup fails permanently, -EPROBE_DEFER if lookup could succeed + * in the future. + */ +static struct regulator_dev *regulator_dev_lookup(struct device *dev, + const char *supply) +{ + struct regulator_dev *r = NULL; + struct device_node *node; + struct regulator_map *map; + const char *devname = NULL; + + regulator_supply_alias(&dev, &supply); + + /* first do a dt based lookup */ + if (dev && dev->of_node) { + node = of_get_regulator(dev, supply); + if (node) { + r = of_find_regulator_by_node(node); + of_node_put(node); + if (r) + return r; + + /* + * We have a node, but there is no device. + * assume it has not registered yet. + */ + return ERR_PTR(-EPROBE_DEFER); + } + } + + /* if not found, try doing it non-dt way */ + if (dev) + devname = dev_name(dev); + + mutex_lock(®ulator_list_mutex); + list_for_each_entry(map, ®ulator_map_list, list) { + /* If the mapping has a device set up it must match */ + if (map->dev_name && + (!devname || strcmp(map->dev_name, devname))) + continue; + + if (strcmp(map->supply, supply) == 0 && + get_device(&map->regulator->dev)) { + r = map->regulator; + break; + } + } + mutex_unlock(®ulator_list_mutex); + + if (r) + return r; + + r = regulator_lookup_by_name(supply); + if (r) + return r; + + return ERR_PTR(-ENODEV); +} + +static int regulator_resolve_supply(struct regulator_dev *rdev) +{ + struct regulator_dev *r; + struct device *dev = rdev->dev.parent; + struct ww_acquire_ctx ww_ctx; + int ret = 0; + + /* No supply to resolve? */ + if (!rdev->supply_name) + return 0; + + /* Supply already resolved? (fast-path without locking contention) */ + if (rdev->supply) + return 0; + + r = regulator_dev_lookup(dev, rdev->supply_name); + if (IS_ERR(r)) { + ret = PTR_ERR(r); + + /* Did the lookup explicitly defer for us? */ + if (ret == -EPROBE_DEFER) + goto out; + + if (have_full_constraints()) { + r = dummy_regulator_rdev; + get_device(&r->dev); + } else { + dev_err(dev, "Failed to resolve %s-supply for %s\n", + rdev->supply_name, rdev->desc->name); + ret = -EPROBE_DEFER; + goto out; + } + } + + if (r == rdev) { + dev_err(dev, "Supply for %s (%s) resolved to itself\n", + rdev->desc->name, rdev->supply_name); + if (!have_full_constraints()) { + ret = -EINVAL; + goto out; + } + r = dummy_regulator_rdev; + get_device(&r->dev); + } + + /* + * If the supply's parent device is not the same as the + * regulator's parent device, then ensure the parent device + * is bound before we resolve the supply, in case the parent + * device get probe deferred and unregisters the supply. + */ + if (r->dev.parent && r->dev.parent != rdev->dev.parent) { + if (!device_is_bound(r->dev.parent)) { + put_device(&r->dev); + ret = -EPROBE_DEFER; + goto out; + } + } + + /* Recursively resolve the supply of the supply */ + ret = regulator_resolve_supply(r); + if (ret < 0) { + put_device(&r->dev); + goto out; + } + + /* + * Recheck rdev->supply with rdev->mutex lock held to avoid a race + * between rdev->supply null check and setting rdev->supply in + * set_supply() from concurrent tasks. + */ + regulator_lock_two(rdev, r, &ww_ctx); + + /* Supply just resolved by a concurrent task? */ + if (rdev->supply) { + regulator_unlock_two(rdev, r, &ww_ctx); + put_device(&r->dev); + goto out; + } + + ret = set_supply(rdev, r); + if (ret < 0) { + regulator_unlock_two(rdev, r, &ww_ctx); + put_device(&r->dev); + goto out; + } + + regulator_unlock_two(rdev, r, &ww_ctx); + + /* + * In set_machine_constraints() we may have turned this regulator on + * but we couldn't propagate to the supply if it hadn't been resolved + * yet. Do it now. + */ + if (rdev->use_count) { + ret = regulator_enable(rdev->supply); + if (ret < 0) { + _regulator_put(rdev->supply); + rdev->supply = NULL; + goto out; + } + } + +out: + return ret; +} + +/* Internal regulator request function */ +struct regulator *_regulator_get(struct device *dev, const char *id, + enum regulator_get_type get_type) +{ + struct regulator_dev *rdev; + struct regulator *regulator; + struct device_link *link; + int ret; + + if (get_type >= MAX_GET_TYPE) { + dev_err(dev, "invalid type %d in %s\n", get_type, __func__); + return ERR_PTR(-EINVAL); + } + + if (id == NULL) { + pr_err("get() with no identifier\n"); + return ERR_PTR(-EINVAL); + } + + rdev = regulator_dev_lookup(dev, id); + if (IS_ERR(rdev)) { + ret = PTR_ERR(rdev); + + /* + * If regulator_dev_lookup() fails with error other + * than -ENODEV our job here is done, we simply return it. + */ + if (ret != -ENODEV) + return ERR_PTR(ret); + + if (!have_full_constraints()) { + dev_warn(dev, + "incomplete constraints, dummy supplies not allowed\n"); + return ERR_PTR(-ENODEV); + } + + switch (get_type) { + case NORMAL_GET: + /* + * Assume that a regulator is physically present and + * enabled, even if it isn't hooked up, and just + * provide a dummy. + */ + dev_warn(dev, "supply %s not found, using dummy regulator\n", id); + rdev = dummy_regulator_rdev; + get_device(&rdev->dev); + break; + + case EXCLUSIVE_GET: + dev_warn(dev, + "dummy supplies not allowed for exclusive requests\n"); + fallthrough; + + default: + return ERR_PTR(-ENODEV); + } + } + + if (rdev->exclusive) { + regulator = ERR_PTR(-EPERM); + put_device(&rdev->dev); + return regulator; + } + + if (get_type == EXCLUSIVE_GET && rdev->open_count) { + regulator = ERR_PTR(-EBUSY); + put_device(&rdev->dev); + return regulator; + } + + mutex_lock(®ulator_list_mutex); + ret = (rdev->coupling_desc.n_resolved != rdev->coupling_desc.n_coupled); + mutex_unlock(®ulator_list_mutex); + + if (ret != 0) { + regulator = ERR_PTR(-EPROBE_DEFER); + put_device(&rdev->dev); + return regulator; + } + + ret = regulator_resolve_supply(rdev); + if (ret < 0) { + regulator = ERR_PTR(ret); + put_device(&rdev->dev); + return regulator; + } + + if (!try_module_get(rdev->owner)) { + regulator = ERR_PTR(-EPROBE_DEFER); + put_device(&rdev->dev); + return regulator; + } + + regulator_lock(rdev); + regulator = create_regulator(rdev, dev, id); + regulator_unlock(rdev); + if (regulator == NULL) { + regulator = ERR_PTR(-ENOMEM); + module_put(rdev->owner); + put_device(&rdev->dev); + return regulator; + } + + rdev->open_count++; + if (get_type == EXCLUSIVE_GET) { + rdev->exclusive = 1; + + ret = _regulator_is_enabled(rdev); + if (ret > 0) { + rdev->use_count = 1; + regulator->enable_count = 1; + } else { + rdev->use_count = 0; + regulator->enable_count = 0; + } + } + + link = device_link_add(dev, &rdev->dev, DL_FLAG_STATELESS); + if (!IS_ERR_OR_NULL(link)) + regulator->device_link = true; + + return regulator; +} + +/** + * regulator_get - lookup and obtain a reference to a regulator. + * @dev: device for regulator "consumer" + * @id: Supply name or regulator ID. + * + * Returns a struct regulator corresponding to the regulator producer, + * or IS_ERR() condition containing errno. + * + * Use of supply names configured via set_consumer_device_supply() is + * strongly encouraged. It is recommended that the supply name used + * should match the name used for the supply and/or the relevant + * device pins in the datasheet. + */ +struct regulator *regulator_get(struct device *dev, const char *id) +{ + return _regulator_get(dev, id, NORMAL_GET); +} +EXPORT_SYMBOL_GPL(regulator_get); + +/** + * regulator_get_exclusive - obtain exclusive access to a regulator. + * @dev: device for regulator "consumer" + * @id: Supply name or regulator ID. + * + * Returns a struct regulator corresponding to the regulator producer, + * or IS_ERR() condition containing errno. Other consumers will be + * unable to obtain this regulator while this reference is held and the + * use count for the regulator will be initialised to reflect the current + * state of the regulator. + * + * This is intended for use by consumers which cannot tolerate shared + * use of the regulator such as those which need to force the + * regulator off for correct operation of the hardware they are + * controlling. + * + * Use of supply names configured via set_consumer_device_supply() is + * strongly encouraged. It is recommended that the supply name used + * should match the name used for the supply and/or the relevant + * device pins in the datasheet. + */ +struct regulator *regulator_get_exclusive(struct device *dev, const char *id) +{ + return _regulator_get(dev, id, EXCLUSIVE_GET); +} +EXPORT_SYMBOL_GPL(regulator_get_exclusive); + +/** + * regulator_get_optional - obtain optional access to a regulator. + * @dev: device for regulator "consumer" + * @id: Supply name or regulator ID. + * + * Returns a struct regulator corresponding to the regulator producer, + * or IS_ERR() condition containing errno. + * + * This is intended for use by consumers for devices which can have + * some supplies unconnected in normal use, such as some MMC devices. + * It can allow the regulator core to provide stub supplies for other + * supplies requested using normal regulator_get() calls without + * disrupting the operation of drivers that can handle absent + * supplies. + * + * Use of supply names configured via set_consumer_device_supply() is + * strongly encouraged. It is recommended that the supply name used + * should match the name used for the supply and/or the relevant + * device pins in the datasheet. + */ +struct regulator *regulator_get_optional(struct device *dev, const char *id) +{ + return _regulator_get(dev, id, OPTIONAL_GET); +} +EXPORT_SYMBOL_GPL(regulator_get_optional); + +static void destroy_regulator(struct regulator *regulator) +{ + struct regulator_dev *rdev = regulator->rdev; + + debugfs_remove_recursive(regulator->debugfs); + + if (regulator->dev) { + if (regulator->device_link) + device_link_remove(regulator->dev, &rdev->dev); + + /* remove any sysfs entries */ + sysfs_remove_link(&rdev->dev.kobj, regulator->supply_name); + } + + regulator_lock(rdev); + list_del(®ulator->list); + + rdev->open_count--; + rdev->exclusive = 0; + regulator_unlock(rdev); + + kfree_const(regulator->supply_name); + kfree(regulator); +} + +/* regulator_list_mutex lock held by regulator_put() */ +static void _regulator_put(struct regulator *regulator) +{ + struct regulator_dev *rdev; + + if (IS_ERR_OR_NULL(regulator)) + return; + + lockdep_assert_held_once(®ulator_list_mutex); + + /* Docs say you must disable before calling regulator_put() */ + WARN_ON(regulator->enable_count); + + rdev = regulator->rdev; + + destroy_regulator(regulator); + + module_put(rdev->owner); + put_device(&rdev->dev); +} + +/** + * regulator_put - "free" the regulator source + * @regulator: regulator source + * + * Note: drivers must ensure that all regulator_enable calls made on this + * regulator source are balanced by regulator_disable calls prior to calling + * this function. + */ +void regulator_put(struct regulator *regulator) +{ + mutex_lock(®ulator_list_mutex); + _regulator_put(regulator); + mutex_unlock(®ulator_list_mutex); +} +EXPORT_SYMBOL_GPL(regulator_put); + +/** + * regulator_register_supply_alias - Provide device alias for supply lookup + * + * @dev: device that will be given as the regulator "consumer" + * @id: Supply name or regulator ID + * @alias_dev: device that should be used to lookup the supply + * @alias_id: Supply name or regulator ID that should be used to lookup the + * supply + * + * All lookups for id on dev will instead be conducted for alias_id on + * alias_dev. + */ +int regulator_register_supply_alias(struct device *dev, const char *id, + struct device *alias_dev, + const char *alias_id) +{ + struct regulator_supply_alias *map; + + map = regulator_find_supply_alias(dev, id); + if (map) + return -EEXIST; + + map = kzalloc(sizeof(struct regulator_supply_alias), GFP_KERNEL); + if (!map) + return -ENOMEM; + + map->src_dev = dev; + map->src_supply = id; + map->alias_dev = alias_dev; + map->alias_supply = alias_id; + + list_add(&map->list, ®ulator_supply_alias_list); + + pr_info("Adding alias for supply %s,%s -> %s,%s\n", + id, dev_name(dev), alias_id, dev_name(alias_dev)); + + return 0; +} +EXPORT_SYMBOL_GPL(regulator_register_supply_alias); + +/** + * regulator_unregister_supply_alias - Remove device alias + * + * @dev: device that will be given as the regulator "consumer" + * @id: Supply name or regulator ID + * + * Remove a lookup alias if one exists for id on dev. + */ +void regulator_unregister_supply_alias(struct device *dev, const char *id) +{ + struct regulator_supply_alias *map; + + map = regulator_find_supply_alias(dev, id); + if (map) { + list_del(&map->list); + kfree(map); + } +} +EXPORT_SYMBOL_GPL(regulator_unregister_supply_alias); + +/** + * regulator_bulk_register_supply_alias - register multiple aliases + * + * @dev: device that will be given as the regulator "consumer" + * @id: List of supply names or regulator IDs + * @alias_dev: device that should be used to lookup the supply + * @alias_id: List of supply names or regulator IDs that should be used to + * lookup the supply + * @num_id: Number of aliases to register + * + * @return 0 on success, an errno on failure. + * + * This helper function allows drivers to register several supply + * aliases in one operation. If any of the aliases cannot be + * registered any aliases that were registered will be removed + * before returning to the caller. + */ +int regulator_bulk_register_supply_alias(struct device *dev, + const char *const *id, + struct device *alias_dev, + const char *const *alias_id, + int num_id) +{ + int i; + int ret; + + for (i = 0; i < num_id; ++i) { + ret = regulator_register_supply_alias(dev, id[i], alias_dev, + alias_id[i]); + if (ret < 0) + goto err; + } + + return 0; + +err: + dev_err(dev, + "Failed to create supply alias %s,%s -> %s,%s\n", + id[i], dev_name(dev), alias_id[i], dev_name(alias_dev)); + + while (--i >= 0) + regulator_unregister_supply_alias(dev, id[i]); + + return ret; +} +EXPORT_SYMBOL_GPL(regulator_bulk_register_supply_alias); + +/** + * regulator_bulk_unregister_supply_alias - unregister multiple aliases + * + * @dev: device that will be given as the regulator "consumer" + * @id: List of supply names or regulator IDs + * @num_id: Number of aliases to unregister + * + * This helper function allows drivers to unregister several supply + * aliases in one operation. + */ +void regulator_bulk_unregister_supply_alias(struct device *dev, + const char *const *id, + int num_id) +{ + int i; + + for (i = 0; i < num_id; ++i) + regulator_unregister_supply_alias(dev, id[i]); +} +EXPORT_SYMBOL_GPL(regulator_bulk_unregister_supply_alias); + + +/* Manage enable GPIO list. Same GPIO pin can be shared among regulators */ +static int regulator_ena_gpio_request(struct regulator_dev *rdev, + const struct regulator_config *config) +{ + struct regulator_enable_gpio *pin, *new_pin; + struct gpio_desc *gpiod; + + gpiod = config->ena_gpiod; + new_pin = kzalloc(sizeof(*new_pin), GFP_KERNEL); + + mutex_lock(®ulator_list_mutex); + + list_for_each_entry(pin, ®ulator_ena_gpio_list, list) { + if (pin->gpiod == gpiod) { + rdev_dbg(rdev, "GPIO is already used\n"); + goto update_ena_gpio_to_rdev; + } + } + + if (new_pin == NULL) { + mutex_unlock(®ulator_list_mutex); + return -ENOMEM; + } + + pin = new_pin; + new_pin = NULL; + + pin->gpiod = gpiod; + list_add(&pin->list, ®ulator_ena_gpio_list); + +update_ena_gpio_to_rdev: + pin->request_count++; + rdev->ena_pin = pin; + + mutex_unlock(®ulator_list_mutex); + kfree(new_pin); + + return 0; +} + +static void regulator_ena_gpio_free(struct regulator_dev *rdev) +{ + struct regulator_enable_gpio *pin, *n; + + if (!rdev->ena_pin) + return; + + /* Free the GPIO only in case of no use */ + list_for_each_entry_safe(pin, n, ®ulator_ena_gpio_list, list) { + if (pin != rdev->ena_pin) + continue; + + if (--pin->request_count) + break; + + gpiod_put(pin->gpiod); + list_del(&pin->list); + kfree(pin); + break; + } + + rdev->ena_pin = NULL; +} + +/** + * regulator_ena_gpio_ctrl - balance enable_count of each GPIO and actual GPIO pin control + * @rdev: regulator_dev structure + * @enable: enable GPIO at initial use? + * + * GPIO is enabled in case of initial use. (enable_count is 0) + * GPIO is disabled when it is not shared any more. (enable_count <= 1) + */ +static int regulator_ena_gpio_ctrl(struct regulator_dev *rdev, bool enable) +{ + struct regulator_enable_gpio *pin = rdev->ena_pin; + + if (!pin) + return -EINVAL; + + if (enable) { + /* Enable GPIO at initial use */ + if (pin->enable_count == 0) + gpiod_set_value_cansleep(pin->gpiod, 1); + + pin->enable_count++; + } else { + if (pin->enable_count > 1) { + pin->enable_count--; + return 0; + } + + /* Disable GPIO if not used */ + if (pin->enable_count <= 1) { + gpiod_set_value_cansleep(pin->gpiod, 0); + pin->enable_count = 0; + } + } + + return 0; +} + +/** + * _regulator_delay_helper - a delay helper function + * @delay: time to delay in microseconds + * + * Delay for the requested amount of time as per the guidelines in: + * + * Documentation/timers/timers-howto.rst + * + * The assumption here is that these regulator operations will never used in + * atomic context and therefore sleeping functions can be used. + */ +static void _regulator_delay_helper(unsigned int delay) +{ + unsigned int ms = delay / 1000; + unsigned int us = delay % 1000; + + if (ms > 0) { + /* + * For small enough values, handle super-millisecond + * delays in the usleep_range() call below. + */ + if (ms < 20) + us += ms * 1000; + else + msleep(ms); + } + + /* + * Give the scheduler some room to coalesce with any other + * wakeup sources. For delays shorter than 10 us, don't even + * bother setting up high-resolution timers and just busy- + * loop. + */ + if (us >= 10) + usleep_range(us, us + 100); + else + udelay(us); +} + +/** + * _regulator_check_status_enabled + * + * A helper function to check if the regulator status can be interpreted + * as 'regulator is enabled'. + * @rdev: the regulator device to check + * + * Return: + * * 1 - if status shows regulator is in enabled state + * * 0 - if not enabled state + * * Error Value - as received from ops->get_status() + */ +static inline int _regulator_check_status_enabled(struct regulator_dev *rdev) +{ + int ret = rdev->desc->ops->get_status(rdev); + + if (ret < 0) { + rdev_info(rdev, "get_status returned error: %d\n", ret); + return ret; + } + + switch (ret) { + case REGULATOR_STATUS_OFF: + case REGULATOR_STATUS_ERROR: + case REGULATOR_STATUS_UNDEFINED: + return 0; + default: + return 1; + } +} + +static int _regulator_do_enable(struct regulator_dev *rdev) +{ + int ret, delay; + + /* Query before enabling in case configuration dependent. */ + ret = _regulator_get_enable_time(rdev); + if (ret >= 0) { + delay = ret; + } else { + rdev_warn(rdev, "enable_time() failed: %pe\n", ERR_PTR(ret)); + delay = 0; + } + + trace_regulator_enable(rdev_get_name(rdev)); + + if (rdev->desc->off_on_delay) { + /* if needed, keep a distance of off_on_delay from last time + * this regulator was disabled. + */ + ktime_t end = ktime_add_us(rdev->last_off, rdev->desc->off_on_delay); + s64 remaining = ktime_us_delta(end, ktime_get_boottime()); + + if (remaining > 0) + _regulator_delay_helper(remaining); + } + + if (rdev->ena_pin) { + if (!rdev->ena_gpio_state) { + ret = regulator_ena_gpio_ctrl(rdev, true); + if (ret < 0) + return ret; + rdev->ena_gpio_state = 1; + } + } else if (rdev->desc->ops->enable) { + ret = rdev->desc->ops->enable(rdev); + if (ret < 0) + return ret; + } else { + return -EINVAL; + } + + /* Allow the regulator to ramp; it would be useful to extend + * this for bulk operations so that the regulators can ramp + * together. + */ + trace_regulator_enable_delay(rdev_get_name(rdev)); + + /* If poll_enabled_time is set, poll upto the delay calculated + * above, delaying poll_enabled_time uS to check if the regulator + * actually got enabled. + * If the regulator isn't enabled after our delay helper has expired, + * return -ETIMEDOUT. + */ + if (rdev->desc->poll_enabled_time) { + int time_remaining = delay; + + while (time_remaining > 0) { + _regulator_delay_helper(rdev->desc->poll_enabled_time); + + if (rdev->desc->ops->get_status) { + ret = _regulator_check_status_enabled(rdev); + if (ret < 0) + return ret; + else if (ret) + break; + } else if (rdev->desc->ops->is_enabled(rdev)) + break; + + time_remaining -= rdev->desc->poll_enabled_time; + } + + if (time_remaining <= 0) { + rdev_err(rdev, "Enabled check timed out\n"); + return -ETIMEDOUT; + } + } else { + _regulator_delay_helper(delay); + } + + trace_regulator_enable_complete(rdev_get_name(rdev)); + + return 0; +} + +/** + * _regulator_handle_consumer_enable - handle that a consumer enabled + * @regulator: regulator source + * + * Some things on a regulator consumer (like the contribution towards total + * load on the regulator) only have an effect when the consumer wants the + * regulator enabled. Explained in example with two consumers of the same + * regulator: + * consumer A: set_load(100); => total load = 0 + * consumer A: regulator_enable(); => total load = 100 + * consumer B: set_load(1000); => total load = 100 + * consumer B: regulator_enable(); => total load = 1100 + * consumer A: regulator_disable(); => total_load = 1000 + * + * This function (together with _regulator_handle_consumer_disable) is + * responsible for keeping track of the refcount for a given regulator consumer + * and applying / unapplying these things. + * + * Returns 0 upon no error; -error upon error. + */ +static int _regulator_handle_consumer_enable(struct regulator *regulator) +{ + int ret; + struct regulator_dev *rdev = regulator->rdev; + + lockdep_assert_held_once(&rdev->mutex.base); + + regulator->enable_count++; + if (regulator->uA_load && regulator->enable_count == 1) { + ret = drms_uA_update(rdev); + if (ret) + regulator->enable_count--; + return ret; + } + + return 0; +} + +/** + * _regulator_handle_consumer_disable - handle that a consumer disabled + * @regulator: regulator source + * + * The opposite of _regulator_handle_consumer_enable(). + * + * Returns 0 upon no error; -error upon error. + */ +static int _regulator_handle_consumer_disable(struct regulator *regulator) +{ + struct regulator_dev *rdev = regulator->rdev; + + lockdep_assert_held_once(&rdev->mutex.base); + + if (!regulator->enable_count) { + rdev_err(rdev, "Underflow of regulator enable count\n"); + return -EINVAL; + } + + regulator->enable_count--; + if (regulator->uA_load && regulator->enable_count == 0) + return drms_uA_update(rdev); + + return 0; +} + +/* locks held by regulator_enable() */ +static int _regulator_enable(struct regulator *regulator) +{ + struct regulator_dev *rdev = regulator->rdev; + int ret; + + lockdep_assert_held_once(&rdev->mutex.base); + + if (rdev->use_count == 0 && rdev->supply) { + ret = _regulator_enable(rdev->supply); + if (ret < 0) + return ret; + } + + /* balance only if there are regulators coupled */ + if (rdev->coupling_desc.n_coupled > 1) { + ret = regulator_balance_voltage(rdev, PM_SUSPEND_ON); + if (ret < 0) + goto err_disable_supply; + } + + ret = _regulator_handle_consumer_enable(regulator); + if (ret < 0) + goto err_disable_supply; + + if (rdev->use_count == 0) { + /* + * The regulator may already be enabled if it's not switchable + * or was left on + */ + ret = _regulator_is_enabled(rdev); + if (ret == -EINVAL || ret == 0) { + if (!regulator_ops_is_valid(rdev, + REGULATOR_CHANGE_STATUS)) { + ret = -EPERM; + goto err_consumer_disable; + } + + ret = _regulator_do_enable(rdev); + if (ret < 0) + goto err_consumer_disable; + + _notifier_call_chain(rdev, REGULATOR_EVENT_ENABLE, + NULL); + } else if (ret < 0) { + rdev_err(rdev, "is_enabled() failed: %pe\n", ERR_PTR(ret)); + goto err_consumer_disable; + } + /* Fallthrough on positive return values - already enabled */ + } + + rdev->use_count++; + + return 0; + +err_consumer_disable: + _regulator_handle_consumer_disable(regulator); + +err_disable_supply: + if (rdev->use_count == 0 && rdev->supply) + _regulator_disable(rdev->supply); + + return ret; +} + +/** + * regulator_enable - enable regulator output + * @regulator: regulator source + * + * Request that the regulator be enabled with the regulator output at + * the predefined voltage or current value. Calls to regulator_enable() + * must be balanced with calls to regulator_disable(). + * + * NOTE: the output value can be set by other drivers, boot loader or may be + * hardwired in the regulator. + */ +int regulator_enable(struct regulator *regulator) +{ + struct regulator_dev *rdev = regulator->rdev; + struct ww_acquire_ctx ww_ctx; + int ret; + + regulator_lock_dependent(rdev, &ww_ctx); + ret = _regulator_enable(regulator); + regulator_unlock_dependent(rdev, &ww_ctx); + + return ret; +} +EXPORT_SYMBOL_GPL(regulator_enable); + +static int _regulator_do_disable(struct regulator_dev *rdev) +{ + int ret; + + trace_regulator_disable(rdev_get_name(rdev)); + + if (rdev->ena_pin) { + if (rdev->ena_gpio_state) { + ret = regulator_ena_gpio_ctrl(rdev, false); + if (ret < 0) + return ret; + rdev->ena_gpio_state = 0; + } + + } else if (rdev->desc->ops->disable) { + ret = rdev->desc->ops->disable(rdev); + if (ret != 0) + return ret; + } + + if (rdev->desc->off_on_delay) + rdev->last_off = ktime_get_boottime(); + + trace_regulator_disable_complete(rdev_get_name(rdev)); + + return 0; +} + +/* locks held by regulator_disable() */ +static int _regulator_disable(struct regulator *regulator) +{ + struct regulator_dev *rdev = regulator->rdev; + int ret = 0; + + lockdep_assert_held_once(&rdev->mutex.base); + + if (WARN(rdev->use_count <= 0, + "unbalanced disables for %s\n", rdev_get_name(rdev))) + return -EIO; + + /* are we the last user and permitted to disable ? */ + if (rdev->use_count == 1 && + (rdev->constraints && !rdev->constraints->always_on)) { + + /* we are last user */ + if (regulator_ops_is_valid(rdev, REGULATOR_CHANGE_STATUS)) { + ret = _notifier_call_chain(rdev, + REGULATOR_EVENT_PRE_DISABLE, + NULL); + if (ret & NOTIFY_STOP_MASK) + return -EINVAL; + + ret = _regulator_do_disable(rdev); + if (ret < 0) { + rdev_err(rdev, "failed to disable: %pe\n", ERR_PTR(ret)); + _notifier_call_chain(rdev, + REGULATOR_EVENT_ABORT_DISABLE, + NULL); + return ret; + } + _notifier_call_chain(rdev, REGULATOR_EVENT_DISABLE, + NULL); + } + + rdev->use_count = 0; + } else if (rdev->use_count > 1) { + rdev->use_count--; + } + + if (ret == 0) + ret = _regulator_handle_consumer_disable(regulator); + + if (ret == 0 && rdev->coupling_desc.n_coupled > 1) + ret = regulator_balance_voltage(rdev, PM_SUSPEND_ON); + + if (ret == 0 && rdev->use_count == 0 && rdev->supply) + ret = _regulator_disable(rdev->supply); + + return ret; +} + +/** + * regulator_disable - disable regulator output + * @regulator: regulator source + * + * Disable the regulator output voltage or current. Calls to + * regulator_enable() must be balanced with calls to + * regulator_disable(). + * + * NOTE: this will only disable the regulator output if no other consumer + * devices have it enabled, the regulator device supports disabling and + * machine constraints permit this operation. + */ +int regulator_disable(struct regulator *regulator) +{ + struct regulator_dev *rdev = regulator->rdev; + struct ww_acquire_ctx ww_ctx; + int ret; + + regulator_lock_dependent(rdev, &ww_ctx); + ret = _regulator_disable(regulator); + regulator_unlock_dependent(rdev, &ww_ctx); + + return ret; +} +EXPORT_SYMBOL_GPL(regulator_disable); + +/* locks held by regulator_force_disable() */ +static int _regulator_force_disable(struct regulator_dev *rdev) +{ + int ret = 0; + + lockdep_assert_held_once(&rdev->mutex.base); + + ret = _notifier_call_chain(rdev, REGULATOR_EVENT_FORCE_DISABLE | + REGULATOR_EVENT_PRE_DISABLE, NULL); + if (ret & NOTIFY_STOP_MASK) + return -EINVAL; + + ret = _regulator_do_disable(rdev); + if (ret < 0) { + rdev_err(rdev, "failed to force disable: %pe\n", ERR_PTR(ret)); + _notifier_call_chain(rdev, REGULATOR_EVENT_FORCE_DISABLE | + REGULATOR_EVENT_ABORT_DISABLE, NULL); + return ret; + } + + _notifier_call_chain(rdev, REGULATOR_EVENT_FORCE_DISABLE | + REGULATOR_EVENT_DISABLE, NULL); + + return 0; +} + +/** + * regulator_force_disable - force disable regulator output + * @regulator: regulator source + * + * Forcibly disable the regulator output voltage or current. + * NOTE: this *will* disable the regulator output even if other consumer + * devices have it enabled. This should be used for situations when device + * damage will likely occur if the regulator is not disabled (e.g. over temp). + */ +int regulator_force_disable(struct regulator *regulator) +{ + struct regulator_dev *rdev = regulator->rdev; + struct ww_acquire_ctx ww_ctx; + int ret; + + regulator_lock_dependent(rdev, &ww_ctx); + + ret = _regulator_force_disable(regulator->rdev); + + if (rdev->coupling_desc.n_coupled > 1) + regulator_balance_voltage(rdev, PM_SUSPEND_ON); + + if (regulator->uA_load) { + regulator->uA_load = 0; + ret = drms_uA_update(rdev); + } + + if (rdev->use_count != 0 && rdev->supply) + _regulator_disable(rdev->supply); + + regulator_unlock_dependent(rdev, &ww_ctx); + + return ret; +} +EXPORT_SYMBOL_GPL(regulator_force_disable); + +static void regulator_disable_work(struct work_struct *work) +{ + struct regulator_dev *rdev = container_of(work, struct regulator_dev, + disable_work.work); + struct ww_acquire_ctx ww_ctx; + int count, i, ret; + struct regulator *regulator; + int total_count = 0; + + regulator_lock_dependent(rdev, &ww_ctx); + + /* + * Workqueue functions queue the new work instance while the previous + * work instance is being processed. Cancel the queued work instance + * as the work instance under processing does the job of the queued + * work instance. + */ + cancel_delayed_work(&rdev->disable_work); + + list_for_each_entry(regulator, &rdev->consumer_list, list) { + count = regulator->deferred_disables; + + if (!count) + continue; + + total_count += count; + regulator->deferred_disables = 0; + + for (i = 0; i < count; i++) { + ret = _regulator_disable(regulator); + if (ret != 0) + rdev_err(rdev, "Deferred disable failed: %pe\n", + ERR_PTR(ret)); + } + } + WARN_ON(!total_count); + + if (rdev->coupling_desc.n_coupled > 1) + regulator_balance_voltage(rdev, PM_SUSPEND_ON); + + regulator_unlock_dependent(rdev, &ww_ctx); +} + +/** + * regulator_disable_deferred - disable regulator output with delay + * @regulator: regulator source + * @ms: milliseconds until the regulator is disabled + * + * Execute regulator_disable() on the regulator after a delay. This + * is intended for use with devices that require some time to quiesce. + * + * NOTE: this will only disable the regulator output if no other consumer + * devices have it enabled, the regulator device supports disabling and + * machine constraints permit this operation. + */ +int regulator_disable_deferred(struct regulator *regulator, int ms) +{ + struct regulator_dev *rdev = regulator->rdev; + + if (!ms) + return regulator_disable(regulator); + + regulator_lock(rdev); + regulator->deferred_disables++; + mod_delayed_work(system_power_efficient_wq, &rdev->disable_work, + msecs_to_jiffies(ms)); + regulator_unlock(rdev); + + return 0; +} +EXPORT_SYMBOL_GPL(regulator_disable_deferred); + +static int _regulator_is_enabled(struct regulator_dev *rdev) +{ + /* A GPIO control always takes precedence */ + if (rdev->ena_pin) + return rdev->ena_gpio_state; + + /* If we don't know then assume that the regulator is always on */ + if (!rdev->desc->ops->is_enabled) + return 1; + + return rdev->desc->ops->is_enabled(rdev); +} + +static int _regulator_list_voltage(struct regulator_dev *rdev, + unsigned selector, int lock) +{ + const struct regulator_ops *ops = rdev->desc->ops; + int ret; + + if (rdev->desc->fixed_uV && rdev->desc->n_voltages == 1 && !selector) + return rdev->desc->fixed_uV; + + if (ops->list_voltage) { + if (selector >= rdev->desc->n_voltages) + return -EINVAL; + if (selector < rdev->desc->linear_min_sel) + return 0; + if (lock) + regulator_lock(rdev); + ret = ops->list_voltage(rdev, selector); + if (lock) + regulator_unlock(rdev); + } else if (rdev->is_switch && rdev->supply) { + ret = _regulator_list_voltage(rdev->supply->rdev, + selector, lock); + } else { + return -EINVAL; + } + + if (ret > 0) { + if (ret < rdev->constraints->min_uV) + ret = 0; + else if (ret > rdev->constraints->max_uV) + ret = 0; + } + + return ret; +} + +/** + * regulator_is_enabled - is the regulator output enabled + * @regulator: regulator source + * + * Returns positive if the regulator driver backing the source/client + * has requested that the device be enabled, zero if it hasn't, else a + * negative errno code. + * + * Note that the device backing this regulator handle can have multiple + * users, so it might be enabled even if regulator_enable() was never + * called for this particular source. + */ +int regulator_is_enabled(struct regulator *regulator) +{ + int ret; + + if (regulator->always_on) + return 1; + + regulator_lock(regulator->rdev); + ret = _regulator_is_enabled(regulator->rdev); + regulator_unlock(regulator->rdev); + + return ret; +} +EXPORT_SYMBOL_GPL(regulator_is_enabled); + +/** + * regulator_count_voltages - count regulator_list_voltage() selectors + * @regulator: regulator source + * + * Returns number of selectors, or negative errno. Selectors are + * numbered starting at zero, and typically correspond to bitfields + * in hardware registers. + */ +int regulator_count_voltages(struct regulator *regulator) +{ + struct regulator_dev *rdev = regulator->rdev; + + if (rdev->desc->n_voltages) + return rdev->desc->n_voltages; + + if (!rdev->is_switch || !rdev->supply) + return -EINVAL; + + return regulator_count_voltages(rdev->supply); +} +EXPORT_SYMBOL_GPL(regulator_count_voltages); + +/** + * regulator_list_voltage - enumerate supported voltages + * @regulator: regulator source + * @selector: identify voltage to list + * Context: can sleep + * + * Returns a voltage that can be passed to @regulator_set_voltage(), + * zero if this selector code can't be used on this system, or a + * negative errno. + */ +int regulator_list_voltage(struct regulator *regulator, unsigned selector) +{ + return _regulator_list_voltage(regulator->rdev, selector, 1); +} +EXPORT_SYMBOL_GPL(regulator_list_voltage); + +/** + * regulator_get_regmap - get the regulator's register map + * @regulator: regulator source + * + * Returns the register map for the given regulator, or an ERR_PTR value + * if the regulator doesn't use regmap. + */ +struct regmap *regulator_get_regmap(struct regulator *regulator) +{ + struct regmap *map = regulator->rdev->regmap; + + return map ? map : ERR_PTR(-EOPNOTSUPP); +} + +/** + * regulator_get_hardware_vsel_register - get the HW voltage selector register + * @regulator: regulator source + * @vsel_reg: voltage selector register, output parameter + * @vsel_mask: mask for voltage selector bitfield, output parameter + * + * Returns the hardware register offset and bitmask used for setting the + * regulator voltage. This might be useful when configuring voltage-scaling + * hardware or firmware that can make I2C requests behind the kernel's back, + * for example. + * + * On success, the output parameters @vsel_reg and @vsel_mask are filled in + * and 0 is returned, otherwise a negative errno is returned. + */ +int regulator_get_hardware_vsel_register(struct regulator *regulator, + unsigned *vsel_reg, + unsigned *vsel_mask) +{ + struct regulator_dev *rdev = regulator->rdev; + const struct regulator_ops *ops = rdev->desc->ops; + + if (ops->set_voltage_sel != regulator_set_voltage_sel_regmap) + return -EOPNOTSUPP; + + *vsel_reg = rdev->desc->vsel_reg; + *vsel_mask = rdev->desc->vsel_mask; + + return 0; +} +EXPORT_SYMBOL_GPL(regulator_get_hardware_vsel_register); + +/** + * regulator_list_hardware_vsel - get the HW-specific register value for a selector + * @regulator: regulator source + * @selector: identify voltage to list + * + * Converts the selector to a hardware-specific voltage selector that can be + * directly written to the regulator registers. The address of the voltage + * register can be determined by calling @regulator_get_hardware_vsel_register. + * + * On error a negative errno is returned. + */ +int regulator_list_hardware_vsel(struct regulator *regulator, + unsigned selector) +{ + struct regulator_dev *rdev = regulator->rdev; + const struct regulator_ops *ops = rdev->desc->ops; + + if (selector >= rdev->desc->n_voltages) + return -EINVAL; + if (selector < rdev->desc->linear_min_sel) + return 0; + if (ops->set_voltage_sel != regulator_set_voltage_sel_regmap) + return -EOPNOTSUPP; + + return selector; +} +EXPORT_SYMBOL_GPL(regulator_list_hardware_vsel); + +/** + * regulator_get_linear_step - return the voltage step size between VSEL values + * @regulator: regulator source + * + * Returns the voltage step size between VSEL values for linear + * regulators, or return 0 if the regulator isn't a linear regulator. + */ +unsigned int regulator_get_linear_step(struct regulator *regulator) +{ + struct regulator_dev *rdev = regulator->rdev; + + return rdev->desc->uV_step; +} +EXPORT_SYMBOL_GPL(regulator_get_linear_step); + +/** + * regulator_is_supported_voltage - check if a voltage range can be supported + * + * @regulator: Regulator to check. + * @min_uV: Minimum required voltage in uV. + * @max_uV: Maximum required voltage in uV. + * + * Returns a boolean. + */ +int regulator_is_supported_voltage(struct regulator *regulator, + int min_uV, int max_uV) +{ + struct regulator_dev *rdev = regulator->rdev; + int i, voltages, ret; + + /* If we can't change voltage check the current voltage */ + if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_VOLTAGE)) { + ret = regulator_get_voltage(regulator); + if (ret >= 0) + return min_uV <= ret && ret <= max_uV; + else + return ret; + } + + /* Any voltage within constrains range is fine? */ + if (rdev->desc->continuous_voltage_range) + return min_uV >= rdev->constraints->min_uV && + max_uV <= rdev->constraints->max_uV; + + ret = regulator_count_voltages(regulator); + if (ret < 0) + return 0; + voltages = ret; + + for (i = 0; i < voltages; i++) { + ret = regulator_list_voltage(regulator, i); + + if (ret >= min_uV && ret <= max_uV) + return 1; + } + + return 0; +} +EXPORT_SYMBOL_GPL(regulator_is_supported_voltage); + +static int regulator_map_voltage(struct regulator_dev *rdev, int min_uV, + int max_uV) +{ + const struct regulator_desc *desc = rdev->desc; + + if (desc->ops->map_voltage) + return desc->ops->map_voltage(rdev, min_uV, max_uV); + + if (desc->ops->list_voltage == regulator_list_voltage_linear) + return regulator_map_voltage_linear(rdev, min_uV, max_uV); + + if (desc->ops->list_voltage == regulator_list_voltage_linear_range) + return regulator_map_voltage_linear_range(rdev, min_uV, max_uV); + + if (desc->ops->list_voltage == + regulator_list_voltage_pickable_linear_range) + return regulator_map_voltage_pickable_linear_range(rdev, + min_uV, max_uV); + + return regulator_map_voltage_iterate(rdev, min_uV, max_uV); +} + +static int _regulator_call_set_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV, + unsigned *selector) +{ + struct pre_voltage_change_data data; + int ret; + + data.old_uV = regulator_get_voltage_rdev(rdev); + data.min_uV = min_uV; + data.max_uV = max_uV; + ret = _notifier_call_chain(rdev, REGULATOR_EVENT_PRE_VOLTAGE_CHANGE, + &data); + if (ret & NOTIFY_STOP_MASK) + return -EINVAL; + + ret = rdev->desc->ops->set_voltage(rdev, min_uV, max_uV, selector); + if (ret >= 0) + return ret; + + _notifier_call_chain(rdev, REGULATOR_EVENT_ABORT_VOLTAGE_CHANGE, + (void *)data.old_uV); + + return ret; +} + +static int _regulator_call_set_voltage_sel(struct regulator_dev *rdev, + int uV, unsigned selector) +{ + struct pre_voltage_change_data data; + int ret; + + data.old_uV = regulator_get_voltage_rdev(rdev); + data.min_uV = uV; + data.max_uV = uV; + ret = _notifier_call_chain(rdev, REGULATOR_EVENT_PRE_VOLTAGE_CHANGE, + &data); + if (ret & NOTIFY_STOP_MASK) + return -EINVAL; + + ret = rdev->desc->ops->set_voltage_sel(rdev, selector); + if (ret >= 0) + return ret; + + _notifier_call_chain(rdev, REGULATOR_EVENT_ABORT_VOLTAGE_CHANGE, + (void *)data.old_uV); + + return ret; +} + +static int _regulator_set_voltage_sel_step(struct regulator_dev *rdev, + int uV, int new_selector) +{ + const struct regulator_ops *ops = rdev->desc->ops; + int diff, old_sel, curr_sel, ret; + + /* Stepping is only needed if the regulator is enabled. */ + if (!_regulator_is_enabled(rdev)) + goto final_set; + + if (!ops->get_voltage_sel) + return -EINVAL; + + old_sel = ops->get_voltage_sel(rdev); + if (old_sel < 0) + return old_sel; + + diff = new_selector - old_sel; + if (diff == 0) + return 0; /* No change needed. */ + + if (diff > 0) { + /* Stepping up. */ + for (curr_sel = old_sel + rdev->desc->vsel_step; + curr_sel < new_selector; + curr_sel += rdev->desc->vsel_step) { + /* + * Call the callback directly instead of using + * _regulator_call_set_voltage_sel() as we don't + * want to notify anyone yet. Same in the branch + * below. + */ + ret = ops->set_voltage_sel(rdev, curr_sel); + if (ret) + goto try_revert; + } + } else { + /* Stepping down. */ + for (curr_sel = old_sel - rdev->desc->vsel_step; + curr_sel > new_selector; + curr_sel -= rdev->desc->vsel_step) { + ret = ops->set_voltage_sel(rdev, curr_sel); + if (ret) + goto try_revert; + } + } + +final_set: + /* The final selector will trigger the notifiers. */ + return _regulator_call_set_voltage_sel(rdev, uV, new_selector); + +try_revert: + /* + * At least try to return to the previous voltage if setting a new + * one failed. + */ + (void)ops->set_voltage_sel(rdev, old_sel); + return ret; +} + +static int _regulator_set_voltage_time(struct regulator_dev *rdev, + int old_uV, int new_uV) +{ + unsigned int ramp_delay = 0; + + if (rdev->constraints->ramp_delay) + ramp_delay = rdev->constraints->ramp_delay; + else if (rdev->desc->ramp_delay) + ramp_delay = rdev->desc->ramp_delay; + else if (rdev->constraints->settling_time) + return rdev->constraints->settling_time; + else if (rdev->constraints->settling_time_up && + (new_uV > old_uV)) + return rdev->constraints->settling_time_up; + else if (rdev->constraints->settling_time_down && + (new_uV < old_uV)) + return rdev->constraints->settling_time_down; + + if (ramp_delay == 0) + return 0; + + return DIV_ROUND_UP(abs(new_uV - old_uV), ramp_delay); +} + +static int _regulator_do_set_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + int ret; + int delay = 0; + int best_val = 0; + unsigned int selector; + int old_selector = -1; + const struct regulator_ops *ops = rdev->desc->ops; + int old_uV = regulator_get_voltage_rdev(rdev); + + trace_regulator_set_voltage(rdev_get_name(rdev), min_uV, max_uV); + + min_uV += rdev->constraints->uV_offset; + max_uV += rdev->constraints->uV_offset; + + /* + * If we can't obtain the old selector there is not enough + * info to call set_voltage_time_sel(). + */ + if (_regulator_is_enabled(rdev) && + ops->set_voltage_time_sel && ops->get_voltage_sel) { + old_selector = ops->get_voltage_sel(rdev); + if (old_selector < 0) + return old_selector; + } + + if (ops->set_voltage) { + ret = _regulator_call_set_voltage(rdev, min_uV, max_uV, + &selector); + + if (ret >= 0) { + if (ops->list_voltage) + best_val = ops->list_voltage(rdev, + selector); + else + best_val = regulator_get_voltage_rdev(rdev); + } + + } else if (ops->set_voltage_sel) { + ret = regulator_map_voltage(rdev, min_uV, max_uV); + if (ret >= 0) { + best_val = ops->list_voltage(rdev, ret); + if (min_uV <= best_val && max_uV >= best_val) { + selector = ret; + if (old_selector == selector) + ret = 0; + else if (rdev->desc->vsel_step) + ret = _regulator_set_voltage_sel_step( + rdev, best_val, selector); + else + ret = _regulator_call_set_voltage_sel( + rdev, best_val, selector); + } else { + ret = -EINVAL; + } + } + } else { + ret = -EINVAL; + } + + if (ret) + goto out; + + if (ops->set_voltage_time_sel) { + /* + * Call set_voltage_time_sel if successfully obtained + * old_selector + */ + if (old_selector >= 0 && old_selector != selector) + delay = ops->set_voltage_time_sel(rdev, old_selector, + selector); + } else { + if (old_uV != best_val) { + if (ops->set_voltage_time) + delay = ops->set_voltage_time(rdev, old_uV, + best_val); + else + delay = _regulator_set_voltage_time(rdev, + old_uV, + best_val); + } + } + + if (delay < 0) { + rdev_warn(rdev, "failed to get delay: %pe\n", ERR_PTR(delay)); + delay = 0; + } + + /* Insert any necessary delays */ + _regulator_delay_helper(delay); + + if (best_val >= 0) { + unsigned long data = best_val; + + _notifier_call_chain(rdev, REGULATOR_EVENT_VOLTAGE_CHANGE, + (void *)data); + } + +out: + trace_regulator_set_voltage_complete(rdev_get_name(rdev), best_val); + + return ret; +} + +static int _regulator_do_set_suspend_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV, suspend_state_t state) +{ + struct regulator_state *rstate; + int uV, sel; + + rstate = regulator_get_suspend_state(rdev, state); + if (rstate == NULL) + return -EINVAL; + + if (min_uV < rstate->min_uV) + min_uV = rstate->min_uV; + if (max_uV > rstate->max_uV) + max_uV = rstate->max_uV; + + sel = regulator_map_voltage(rdev, min_uV, max_uV); + if (sel < 0) + return sel; + + uV = rdev->desc->ops->list_voltage(rdev, sel); + if (uV >= min_uV && uV <= max_uV) + rstate->uV = uV; + + return 0; +} + +static int regulator_set_voltage_unlocked(struct regulator *regulator, + int min_uV, int max_uV, + suspend_state_t state) +{ + struct regulator_dev *rdev = regulator->rdev; + struct regulator_voltage *voltage = ®ulator->voltage[state]; + int ret = 0; + int old_min_uV, old_max_uV; + int current_uV; + + /* If we're setting the same range as last time the change + * should be a noop (some cpufreq implementations use the same + * voltage for multiple frequencies, for example). + */ + if (voltage->min_uV == min_uV && voltage->max_uV == max_uV) + goto out; + + /* If we're trying to set a range that overlaps the current voltage, + * return successfully even though the regulator does not support + * changing the voltage. + */ + if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_VOLTAGE)) { + current_uV = regulator_get_voltage_rdev(rdev); + if (min_uV <= current_uV && current_uV <= max_uV) { + voltage->min_uV = min_uV; + voltage->max_uV = max_uV; + goto out; + } + } + + /* sanity check */ + if (!rdev->desc->ops->set_voltage && + !rdev->desc->ops->set_voltage_sel) { + ret = -EINVAL; + goto out; + } + + /* constraints check */ + ret = regulator_check_voltage(rdev, &min_uV, &max_uV); + if (ret < 0) + goto out; + + /* restore original values in case of error */ + old_min_uV = voltage->min_uV; + old_max_uV = voltage->max_uV; + voltage->min_uV = min_uV; + voltage->max_uV = max_uV; + + /* for not coupled regulators this will just set the voltage */ + ret = regulator_balance_voltage(rdev, state); + if (ret < 0) { + voltage->min_uV = old_min_uV; + voltage->max_uV = old_max_uV; + } + +out: + return ret; +} + +int regulator_set_voltage_rdev(struct regulator_dev *rdev, int min_uV, + int max_uV, suspend_state_t state) +{ + int best_supply_uV = 0; + int supply_change_uV = 0; + int ret; + + if (rdev->supply && + regulator_ops_is_valid(rdev->supply->rdev, + REGULATOR_CHANGE_VOLTAGE) && + (rdev->desc->min_dropout_uV || !(rdev->desc->ops->get_voltage || + rdev->desc->ops->get_voltage_sel))) { + int current_supply_uV; + int selector; + + selector = regulator_map_voltage(rdev, min_uV, max_uV); + if (selector < 0) { + ret = selector; + goto out; + } + + best_supply_uV = _regulator_list_voltage(rdev, selector, 0); + if (best_supply_uV < 0) { + ret = best_supply_uV; + goto out; + } + + best_supply_uV += rdev->desc->min_dropout_uV; + + current_supply_uV = regulator_get_voltage_rdev(rdev->supply->rdev); + if (current_supply_uV < 0) { + ret = current_supply_uV; + goto out; + } + + supply_change_uV = best_supply_uV - current_supply_uV; + } + + if (supply_change_uV > 0) { + ret = regulator_set_voltage_unlocked(rdev->supply, + best_supply_uV, INT_MAX, state); + if (ret) { + dev_err(&rdev->dev, "Failed to increase supply voltage: %pe\n", + ERR_PTR(ret)); + goto out; + } + } + + if (state == PM_SUSPEND_ON) + ret = _regulator_do_set_voltage(rdev, min_uV, max_uV); + else + ret = _regulator_do_set_suspend_voltage(rdev, min_uV, + max_uV, state); + if (ret < 0) + goto out; + + if (supply_change_uV < 0) { + ret = regulator_set_voltage_unlocked(rdev->supply, + best_supply_uV, INT_MAX, state); + if (ret) + dev_warn(&rdev->dev, "Failed to decrease supply voltage: %pe\n", + ERR_PTR(ret)); + /* No need to fail here */ + ret = 0; + } + +out: + return ret; +} +EXPORT_SYMBOL_GPL(regulator_set_voltage_rdev); + +static int regulator_limit_voltage_step(struct regulator_dev *rdev, + int *current_uV, int *min_uV) +{ + struct regulation_constraints *constraints = rdev->constraints; + + /* Limit voltage change only if necessary */ + if (!constraints->max_uV_step || !_regulator_is_enabled(rdev)) + return 1; + + if (*current_uV < 0) { + *current_uV = regulator_get_voltage_rdev(rdev); + + if (*current_uV < 0) + return *current_uV; + } + + if (abs(*current_uV - *min_uV) <= constraints->max_uV_step) + return 1; + + /* Clamp target voltage within the given step */ + if (*current_uV < *min_uV) + *min_uV = min(*current_uV + constraints->max_uV_step, + *min_uV); + else + *min_uV = max(*current_uV - constraints->max_uV_step, + *min_uV); + + return 0; +} + +static int regulator_get_optimal_voltage(struct regulator_dev *rdev, + int *current_uV, + int *min_uV, int *max_uV, + suspend_state_t state, + int n_coupled) +{ + struct coupling_desc *c_desc = &rdev->coupling_desc; + struct regulator_dev **c_rdevs = c_desc->coupled_rdevs; + struct regulation_constraints *constraints = rdev->constraints; + int desired_min_uV = 0, desired_max_uV = INT_MAX; + int max_current_uV = 0, min_current_uV = INT_MAX; + int highest_min_uV = 0, target_uV, possible_uV; + int i, ret, max_spread; + bool done; + + *current_uV = -1; + + /* + * If there are no coupled regulators, simply set the voltage + * demanded by consumers. + */ + if (n_coupled == 1) { + /* + * If consumers don't provide any demands, set voltage + * to min_uV + */ + desired_min_uV = constraints->min_uV; + desired_max_uV = constraints->max_uV; + + ret = regulator_check_consumers(rdev, + &desired_min_uV, + &desired_max_uV, state); + if (ret < 0) + return ret; + + possible_uV = desired_min_uV; + done = true; + + goto finish; + } + + /* Find highest min desired voltage */ + for (i = 0; i < n_coupled; i++) { + int tmp_min = 0; + int tmp_max = INT_MAX; + + lockdep_assert_held_once(&c_rdevs[i]->mutex.base); + + ret = regulator_check_consumers(c_rdevs[i], + &tmp_min, + &tmp_max, state); + if (ret < 0) + return ret; + + ret = regulator_check_voltage(c_rdevs[i], &tmp_min, &tmp_max); + if (ret < 0) + return ret; + + highest_min_uV = max(highest_min_uV, tmp_min); + + if (i == 0) { + desired_min_uV = tmp_min; + desired_max_uV = tmp_max; + } + } + + max_spread = constraints->max_spread[0]; + + /* + * Let target_uV be equal to the desired one if possible. + * If not, set it to minimum voltage, allowed by other coupled + * regulators. + */ + target_uV = max(desired_min_uV, highest_min_uV - max_spread); + + /* + * Find min and max voltages, which currently aren't violating + * max_spread. + */ + for (i = 1; i < n_coupled; i++) { + int tmp_act; + + if (!_regulator_is_enabled(c_rdevs[i])) + continue; + + tmp_act = regulator_get_voltage_rdev(c_rdevs[i]); + if (tmp_act < 0) + return tmp_act; + + min_current_uV = min(tmp_act, min_current_uV); + max_current_uV = max(tmp_act, max_current_uV); + } + + /* There aren't any other regulators enabled */ + if (max_current_uV == 0) { + possible_uV = target_uV; + } else { + /* + * Correct target voltage, so as it currently isn't + * violating max_spread + */ + possible_uV = max(target_uV, max_current_uV - max_spread); + possible_uV = min(possible_uV, min_current_uV + max_spread); + } + + if (possible_uV > desired_max_uV) + return -EINVAL; + + done = (possible_uV == target_uV); + desired_min_uV = possible_uV; + +finish: + /* Apply max_uV_step constraint if necessary */ + if (state == PM_SUSPEND_ON) { + ret = regulator_limit_voltage_step(rdev, current_uV, + &desired_min_uV); + if (ret < 0) + return ret; + + if (ret == 0) + done = false; + } + + /* Set current_uV if wasn't done earlier in the code and if necessary */ + if (n_coupled > 1 && *current_uV == -1) { + + if (_regulator_is_enabled(rdev)) { + ret = regulator_get_voltage_rdev(rdev); + if (ret < 0) + return ret; + + *current_uV = ret; + } else { + *current_uV = desired_min_uV; + } + } + + *min_uV = desired_min_uV; + *max_uV = desired_max_uV; + + return done; +} + +int regulator_do_balance_voltage(struct regulator_dev *rdev, + suspend_state_t state, bool skip_coupled) +{ + struct regulator_dev **c_rdevs; + struct regulator_dev *best_rdev; + struct coupling_desc *c_desc = &rdev->coupling_desc; + int i, ret, n_coupled, best_min_uV, best_max_uV, best_c_rdev; + unsigned int delta, best_delta; + unsigned long c_rdev_done = 0; + bool best_c_rdev_done; + + c_rdevs = c_desc->coupled_rdevs; + n_coupled = skip_coupled ? 1 : c_desc->n_coupled; + + /* + * Find the best possible voltage change on each loop. Leave the loop + * if there isn't any possible change. + */ + do { + best_c_rdev_done = false; + best_delta = 0; + best_min_uV = 0; + best_max_uV = 0; + best_c_rdev = 0; + best_rdev = NULL; + + /* + * Find highest difference between optimal voltage + * and current voltage. + */ + for (i = 0; i < n_coupled; i++) { + /* + * optimal_uV is the best voltage that can be set for + * i-th regulator at the moment without violating + * max_spread constraint in order to balance + * the coupled voltages. + */ + int optimal_uV = 0, optimal_max_uV = 0, current_uV = 0; + + if (test_bit(i, &c_rdev_done)) + continue; + + ret = regulator_get_optimal_voltage(c_rdevs[i], + ¤t_uV, + &optimal_uV, + &optimal_max_uV, + state, n_coupled); + if (ret < 0) + goto out; + + delta = abs(optimal_uV - current_uV); + + if (delta && best_delta <= delta) { + best_c_rdev_done = ret; + best_delta = delta; + best_rdev = c_rdevs[i]; + best_min_uV = optimal_uV; + best_max_uV = optimal_max_uV; + best_c_rdev = i; + } + } + + /* Nothing to change, return successfully */ + if (!best_rdev) { + ret = 0; + goto out; + } + + ret = regulator_set_voltage_rdev(best_rdev, best_min_uV, + best_max_uV, state); + + if (ret < 0) + goto out; + + if (best_c_rdev_done) + set_bit(best_c_rdev, &c_rdev_done); + + } while (n_coupled > 1); + +out: + return ret; +} + +static int regulator_balance_voltage(struct regulator_dev *rdev, + suspend_state_t state) +{ + struct coupling_desc *c_desc = &rdev->coupling_desc; + struct regulator_coupler *coupler = c_desc->coupler; + bool skip_coupled = false; + + /* + * If system is in a state other than PM_SUSPEND_ON, don't check + * other coupled regulators. + */ + if (state != PM_SUSPEND_ON) + skip_coupled = true; + + if (c_desc->n_resolved < c_desc->n_coupled) { + rdev_err(rdev, "Not all coupled regulators registered\n"); + return -EPERM; + } + + /* Invoke custom balancer for customized couplers */ + if (coupler && coupler->balance_voltage) + return coupler->balance_voltage(coupler, rdev, state); + + return regulator_do_balance_voltage(rdev, state, skip_coupled); +} + +/** + * regulator_set_voltage - set regulator output voltage + * @regulator: regulator source + * @min_uV: Minimum required voltage in uV + * @max_uV: Maximum acceptable voltage in uV + * + * Sets a voltage regulator to the desired output voltage. This can be set + * during any regulator state. IOW, regulator can be disabled or enabled. + * + * If the regulator is enabled then the voltage will change to the new value + * immediately otherwise if the regulator is disabled the regulator will + * output at the new voltage when enabled. + * + * NOTE: If the regulator is shared between several devices then the lowest + * request voltage that meets the system constraints will be used. + * Regulator system constraints must be set for this regulator before + * calling this function otherwise this call will fail. + */ +int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV) +{ + struct ww_acquire_ctx ww_ctx; + int ret; + + regulator_lock_dependent(regulator->rdev, &ww_ctx); + + ret = regulator_set_voltage_unlocked(regulator, min_uV, max_uV, + PM_SUSPEND_ON); + + regulator_unlock_dependent(regulator->rdev, &ww_ctx); + + return ret; +} +EXPORT_SYMBOL_GPL(regulator_set_voltage); + +static inline int regulator_suspend_toggle(struct regulator_dev *rdev, + suspend_state_t state, bool en) +{ + struct regulator_state *rstate; + + rstate = regulator_get_suspend_state(rdev, state); + if (rstate == NULL) + return -EINVAL; + + if (!rstate->changeable) + return -EPERM; + + rstate->enabled = (en) ? ENABLE_IN_SUSPEND : DISABLE_IN_SUSPEND; + + return 0; +} + +int regulator_suspend_enable(struct regulator_dev *rdev, + suspend_state_t state) +{ + return regulator_suspend_toggle(rdev, state, true); +} +EXPORT_SYMBOL_GPL(regulator_suspend_enable); + +int regulator_suspend_disable(struct regulator_dev *rdev, + suspend_state_t state) +{ + struct regulator *regulator; + struct regulator_voltage *voltage; + + /* + * if any consumer wants this regulator device keeping on in + * suspend states, don't set it as disabled. + */ + list_for_each_entry(regulator, &rdev->consumer_list, list) { + voltage = ®ulator->voltage[state]; + if (voltage->min_uV || voltage->max_uV) + return 0; + } + + return regulator_suspend_toggle(rdev, state, false); +} +EXPORT_SYMBOL_GPL(regulator_suspend_disable); + +static int _regulator_set_suspend_voltage(struct regulator *regulator, + int min_uV, int max_uV, + suspend_state_t state) +{ + struct regulator_dev *rdev = regulator->rdev; + struct regulator_state *rstate; + + rstate = regulator_get_suspend_state(rdev, state); + if (rstate == NULL) + return -EINVAL; + + if (rstate->min_uV == rstate->max_uV) { + rdev_err(rdev, "The suspend voltage can't be changed!\n"); + return -EPERM; + } + + return regulator_set_voltage_unlocked(regulator, min_uV, max_uV, state); +} + +int regulator_set_suspend_voltage(struct regulator *regulator, int min_uV, + int max_uV, suspend_state_t state) +{ + struct ww_acquire_ctx ww_ctx; + int ret; + + /* PM_SUSPEND_ON is handled by regulator_set_voltage() */ + if (regulator_check_states(state) || state == PM_SUSPEND_ON) + return -EINVAL; + + regulator_lock_dependent(regulator->rdev, &ww_ctx); + + ret = _regulator_set_suspend_voltage(regulator, min_uV, + max_uV, state); + + regulator_unlock_dependent(regulator->rdev, &ww_ctx); + + return ret; +} +EXPORT_SYMBOL_GPL(regulator_set_suspend_voltage); + +/** + * regulator_set_voltage_time - get raise/fall time + * @regulator: regulator source + * @old_uV: starting voltage in microvolts + * @new_uV: target voltage in microvolts + * + * Provided with the starting and ending voltage, this function attempts to + * calculate the time in microseconds required to rise or fall to this new + * voltage. + */ +int regulator_set_voltage_time(struct regulator *regulator, + int old_uV, int new_uV) +{ + struct regulator_dev *rdev = regulator->rdev; + const struct regulator_ops *ops = rdev->desc->ops; + int old_sel = -1; + int new_sel = -1; + int voltage; + int i; + + if (ops->set_voltage_time) + return ops->set_voltage_time(rdev, old_uV, new_uV); + else if (!ops->set_voltage_time_sel) + return _regulator_set_voltage_time(rdev, old_uV, new_uV); + + /* Currently requires operations to do this */ + if (!ops->list_voltage || !rdev->desc->n_voltages) + return -EINVAL; + + for (i = 0; i < rdev->desc->n_voltages; i++) { + /* We only look for exact voltage matches here */ + if (i < rdev->desc->linear_min_sel) + continue; + + if (old_sel >= 0 && new_sel >= 0) + break; + + voltage = regulator_list_voltage(regulator, i); + if (voltage < 0) + return -EINVAL; + if (voltage == 0) + continue; + if (voltage == old_uV) + old_sel = i; + if (voltage == new_uV) + new_sel = i; + } + + if (old_sel < 0 || new_sel < 0) + return -EINVAL; + + return ops->set_voltage_time_sel(rdev, old_sel, new_sel); +} +EXPORT_SYMBOL_GPL(regulator_set_voltage_time); + +/** + * regulator_set_voltage_time_sel - get raise/fall time + * @rdev: regulator source device + * @old_selector: selector for starting voltage + * @new_selector: selector for target voltage + * + * Provided with the starting and target voltage selectors, this function + * returns time in microseconds required to rise or fall to this new voltage + * + * Drivers providing ramp_delay in regulation_constraints can use this as their + * set_voltage_time_sel() operation. + */ +int regulator_set_voltage_time_sel(struct regulator_dev *rdev, + unsigned int old_selector, + unsigned int new_selector) +{ + int old_volt, new_volt; + + /* sanity check */ + if (!rdev->desc->ops->list_voltage) + return -EINVAL; + + old_volt = rdev->desc->ops->list_voltage(rdev, old_selector); + new_volt = rdev->desc->ops->list_voltage(rdev, new_selector); + + if (rdev->desc->ops->set_voltage_time) + return rdev->desc->ops->set_voltage_time(rdev, old_volt, + new_volt); + else + return _regulator_set_voltage_time(rdev, old_volt, new_volt); +} +EXPORT_SYMBOL_GPL(regulator_set_voltage_time_sel); + +int regulator_sync_voltage_rdev(struct regulator_dev *rdev) +{ + int ret; + + regulator_lock(rdev); + + if (!rdev->desc->ops->set_voltage && + !rdev->desc->ops->set_voltage_sel) { + ret = -EINVAL; + goto out; + } + + /* balance only, if regulator is coupled */ + if (rdev->coupling_desc.n_coupled > 1) + ret = regulator_balance_voltage(rdev, PM_SUSPEND_ON); + else + ret = -EOPNOTSUPP; + +out: + regulator_unlock(rdev); + return ret; +} + +/** + * regulator_sync_voltage - re-apply last regulator output voltage + * @regulator: regulator source + * + * Re-apply the last configured voltage. This is intended to be used + * where some external control source the consumer is cooperating with + * has caused the configured voltage to change. + */ +int regulator_sync_voltage(struct regulator *regulator) +{ + struct regulator_dev *rdev = regulator->rdev; + struct regulator_voltage *voltage = ®ulator->voltage[PM_SUSPEND_ON]; + int ret, min_uV, max_uV; + + if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_VOLTAGE)) + return 0; + + regulator_lock(rdev); + + if (!rdev->desc->ops->set_voltage && + !rdev->desc->ops->set_voltage_sel) { + ret = -EINVAL; + goto out; + } + + /* This is only going to work if we've had a voltage configured. */ + if (!voltage->min_uV && !voltage->max_uV) { + ret = -EINVAL; + goto out; + } + + min_uV = voltage->min_uV; + max_uV = voltage->max_uV; + + /* This should be a paranoia check... */ + ret = regulator_check_voltage(rdev, &min_uV, &max_uV); + if (ret < 0) + goto out; + + ret = regulator_check_consumers(rdev, &min_uV, &max_uV, 0); + if (ret < 0) + goto out; + + /* balance only, if regulator is coupled */ + if (rdev->coupling_desc.n_coupled > 1) + ret = regulator_balance_voltage(rdev, PM_SUSPEND_ON); + else + ret = _regulator_do_set_voltage(rdev, min_uV, max_uV); + +out: + regulator_unlock(rdev); + return ret; +} +EXPORT_SYMBOL_GPL(regulator_sync_voltage); + +int regulator_get_voltage_rdev(struct regulator_dev *rdev) +{ + int sel, ret; + bool bypassed; + + if (rdev->desc->ops->get_bypass) { + ret = rdev->desc->ops->get_bypass(rdev, &bypassed); + if (ret < 0) + return ret; + if (bypassed) { + /* if bypassed the regulator must have a supply */ + if (!rdev->supply) { + rdev_err(rdev, + "bypassed regulator has no supply!\n"); + return -EPROBE_DEFER; + } + + return regulator_get_voltage_rdev(rdev->supply->rdev); + } + } + + if (rdev->desc->ops->get_voltage_sel) { + sel = rdev->desc->ops->get_voltage_sel(rdev); + if (sel < 0) + return sel; + ret = rdev->desc->ops->list_voltage(rdev, sel); + } else if (rdev->desc->ops->get_voltage) { + ret = rdev->desc->ops->get_voltage(rdev); + } else if (rdev->desc->ops->list_voltage) { + ret = rdev->desc->ops->list_voltage(rdev, 0); + } else if (rdev->desc->fixed_uV && (rdev->desc->n_voltages == 1)) { + ret = rdev->desc->fixed_uV; + } else if (rdev->supply) { + ret = regulator_get_voltage_rdev(rdev->supply->rdev); + } else if (rdev->supply_name) { + return -EPROBE_DEFER; + } else { + return -EINVAL; + } + + if (ret < 0) + return ret; + return ret - rdev->constraints->uV_offset; +} +EXPORT_SYMBOL_GPL(regulator_get_voltage_rdev); + +/** + * regulator_get_voltage - get regulator output voltage + * @regulator: regulator source + * + * This returns the current regulator voltage in uV. + * + * NOTE: If the regulator is disabled it will return the voltage value. This + * function should not be used to determine regulator state. + */ +int regulator_get_voltage(struct regulator *regulator) +{ + struct ww_acquire_ctx ww_ctx; + int ret; + + regulator_lock_dependent(regulator->rdev, &ww_ctx); + ret = regulator_get_voltage_rdev(regulator->rdev); + regulator_unlock_dependent(regulator->rdev, &ww_ctx); + + return ret; +} +EXPORT_SYMBOL_GPL(regulator_get_voltage); + +/** + * regulator_set_current_limit - set regulator output current limit + * @regulator: regulator source + * @min_uA: Minimum supported current in uA + * @max_uA: Maximum supported current in uA + * + * Sets current sink to the desired output current. This can be set during + * any regulator state. IOW, regulator can be disabled or enabled. + * + * If the regulator is enabled then the current will change to the new value + * immediately otherwise if the regulator is disabled the regulator will + * output at the new current when enabled. + * + * NOTE: Regulator system constraints must be set for this regulator before + * calling this function otherwise this call will fail. + */ +int regulator_set_current_limit(struct regulator *regulator, + int min_uA, int max_uA) +{ + struct regulator_dev *rdev = regulator->rdev; + int ret; + + regulator_lock(rdev); + + /* sanity check */ + if (!rdev->desc->ops->set_current_limit) { + ret = -EINVAL; + goto out; + } + + /* constraints check */ + ret = regulator_check_current_limit(rdev, &min_uA, &max_uA); + if (ret < 0) + goto out; + + ret = rdev->desc->ops->set_current_limit(rdev, min_uA, max_uA); +out: + regulator_unlock(rdev); + return ret; +} +EXPORT_SYMBOL_GPL(regulator_set_current_limit); + +static int _regulator_get_current_limit_unlocked(struct regulator_dev *rdev) +{ + /* sanity check */ + if (!rdev->desc->ops->get_current_limit) + return -EINVAL; + + return rdev->desc->ops->get_current_limit(rdev); +} + +static int _regulator_get_current_limit(struct regulator_dev *rdev) +{ + int ret; + + regulator_lock(rdev); + ret = _regulator_get_current_limit_unlocked(rdev); + regulator_unlock(rdev); + + return ret; +} + +/** + * regulator_get_current_limit - get regulator output current + * @regulator: regulator source + * + * This returns the current supplied by the specified current sink in uA. + * + * NOTE: If the regulator is disabled it will return the current value. This + * function should not be used to determine regulator state. + */ +int regulator_get_current_limit(struct regulator *regulator) +{ + return _regulator_get_current_limit(regulator->rdev); +} +EXPORT_SYMBOL_GPL(regulator_get_current_limit); + +/** + * regulator_set_mode - set regulator operating mode + * @regulator: regulator source + * @mode: operating mode - one of the REGULATOR_MODE constants + * + * Set regulator operating mode to increase regulator efficiency or improve + * regulation performance. + * + * NOTE: Regulator system constraints must be set for this regulator before + * calling this function otherwise this call will fail. + */ +int regulator_set_mode(struct regulator *regulator, unsigned int mode) +{ + struct regulator_dev *rdev = regulator->rdev; + int ret; + int regulator_curr_mode; + + regulator_lock(rdev); + + /* sanity check */ + if (!rdev->desc->ops->set_mode) { + ret = -EINVAL; + goto out; + } + + /* return if the same mode is requested */ + if (rdev->desc->ops->get_mode) { + regulator_curr_mode = rdev->desc->ops->get_mode(rdev); + if (regulator_curr_mode == mode) { + ret = 0; + goto out; + } + } + + /* constraints check */ + ret = regulator_mode_constrain(rdev, &mode); + if (ret < 0) + goto out; + + ret = rdev->desc->ops->set_mode(rdev, mode); +out: + regulator_unlock(rdev); + return ret; +} +EXPORT_SYMBOL_GPL(regulator_set_mode); + +static unsigned int _regulator_get_mode_unlocked(struct regulator_dev *rdev) +{ + /* sanity check */ + if (!rdev->desc->ops->get_mode) + return -EINVAL; + + return rdev->desc->ops->get_mode(rdev); +} + +static unsigned int _regulator_get_mode(struct regulator_dev *rdev) +{ + int ret; + + regulator_lock(rdev); + ret = _regulator_get_mode_unlocked(rdev); + regulator_unlock(rdev); + + return ret; +} + +/** + * regulator_get_mode - get regulator operating mode + * @regulator: regulator source + * + * Get the current regulator operating mode. + */ +unsigned int regulator_get_mode(struct regulator *regulator) +{ + return _regulator_get_mode(regulator->rdev); +} +EXPORT_SYMBOL_GPL(regulator_get_mode); + +static int rdev_get_cached_err_flags(struct regulator_dev *rdev) +{ + int ret = 0; + + if (rdev->use_cached_err) { + spin_lock(&rdev->err_lock); + ret = rdev->cached_err; + spin_unlock(&rdev->err_lock); + } + return ret; +} + +static int _regulator_get_error_flags(struct regulator_dev *rdev, + unsigned int *flags) +{ + int cached_flags, ret = 0; + + regulator_lock(rdev); + + cached_flags = rdev_get_cached_err_flags(rdev); + + if (rdev->desc->ops->get_error_flags) + ret = rdev->desc->ops->get_error_flags(rdev, flags); + else if (!rdev->use_cached_err) + ret = -EINVAL; + + *flags |= cached_flags; + + regulator_unlock(rdev); + + return ret; +} + +/** + * regulator_get_error_flags - get regulator error information + * @regulator: regulator source + * @flags: pointer to store error flags + * + * Get the current regulator error information. + */ +int regulator_get_error_flags(struct regulator *regulator, + unsigned int *flags) +{ + return _regulator_get_error_flags(regulator->rdev, flags); +} +EXPORT_SYMBOL_GPL(regulator_get_error_flags); + +/** + * regulator_set_load - set regulator load + * @regulator: regulator source + * @uA_load: load current + * + * Notifies the regulator core of a new device load. This is then used by + * DRMS (if enabled by constraints) to set the most efficient regulator + * operating mode for the new regulator loading. + * + * Consumer devices notify their supply regulator of the maximum power + * they will require (can be taken from device datasheet in the power + * consumption tables) when they change operational status and hence power + * state. Examples of operational state changes that can affect power + * consumption are :- + * + * o Device is opened / closed. + * o Device I/O is about to begin or has just finished. + * o Device is idling in between work. + * + * This information is also exported via sysfs to userspace. + * + * DRMS will sum the total requested load on the regulator and change + * to the most efficient operating mode if platform constraints allow. + * + * NOTE: when a regulator consumer requests to have a regulator + * disabled then any load that consumer requested no longer counts + * toward the total requested load. If the regulator is re-enabled + * then the previously requested load will start counting again. + * + * If a regulator is an always-on regulator then an individual consumer's + * load will still be removed if that consumer is fully disabled. + * + * On error a negative errno is returned. + */ +int regulator_set_load(struct regulator *regulator, int uA_load) +{ + struct regulator_dev *rdev = regulator->rdev; + int old_uA_load; + int ret = 0; + + regulator_lock(rdev); + old_uA_load = regulator->uA_load; + regulator->uA_load = uA_load; + if (regulator->enable_count && old_uA_load != uA_load) { + ret = drms_uA_update(rdev); + if (ret < 0) + regulator->uA_load = old_uA_load; + } + regulator_unlock(rdev); + + return ret; +} +EXPORT_SYMBOL_GPL(regulator_set_load); + +/** + * regulator_allow_bypass - allow the regulator to go into bypass mode + * + * @regulator: Regulator to configure + * @enable: enable or disable bypass mode + * + * Allow the regulator to go into bypass mode if all other consumers + * for the regulator also enable bypass mode and the machine + * constraints allow this. Bypass mode means that the regulator is + * simply passing the input directly to the output with no regulation. + */ +int regulator_allow_bypass(struct regulator *regulator, bool enable) +{ + struct regulator_dev *rdev = regulator->rdev; + const char *name = rdev_get_name(rdev); + int ret = 0; + + if (!rdev->desc->ops->set_bypass) + return 0; + + if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_BYPASS)) + return 0; + + regulator_lock(rdev); + + if (enable && !regulator->bypass) { + rdev->bypass_count++; + + if (rdev->bypass_count == rdev->open_count) { + trace_regulator_bypass_enable(name); + + ret = rdev->desc->ops->set_bypass(rdev, enable); + if (ret != 0) + rdev->bypass_count--; + else + trace_regulator_bypass_enable_complete(name); + } + + } else if (!enable && regulator->bypass) { + rdev->bypass_count--; + + if (rdev->bypass_count != rdev->open_count) { + trace_regulator_bypass_disable(name); + + ret = rdev->desc->ops->set_bypass(rdev, enable); + if (ret != 0) + rdev->bypass_count++; + else + trace_regulator_bypass_disable_complete(name); + } + } + + if (ret == 0) + regulator->bypass = enable; + + regulator_unlock(rdev); + + return ret; +} +EXPORT_SYMBOL_GPL(regulator_allow_bypass); + +/** + * regulator_register_notifier - register regulator event notifier + * @regulator: regulator source + * @nb: notifier block + * + * Register notifier block to receive regulator events. + */ +int regulator_register_notifier(struct regulator *regulator, + struct notifier_block *nb) +{ + return blocking_notifier_chain_register(®ulator->rdev->notifier, + nb); +} +EXPORT_SYMBOL_GPL(regulator_register_notifier); + +/** + * regulator_unregister_notifier - unregister regulator event notifier + * @regulator: regulator source + * @nb: notifier block + * + * Unregister regulator event notifier block. + */ +int regulator_unregister_notifier(struct regulator *regulator, + struct notifier_block *nb) +{ + return blocking_notifier_chain_unregister(®ulator->rdev->notifier, + nb); +} +EXPORT_SYMBOL_GPL(regulator_unregister_notifier); + +/* notify regulator consumers and downstream regulator consumers. + * Note mutex must be held by caller. + */ +static int _notifier_call_chain(struct regulator_dev *rdev, + unsigned long event, void *data) +{ + /* call rdev chain first */ + return blocking_notifier_call_chain(&rdev->notifier, event, data); +} + +int _regulator_bulk_get(struct device *dev, int num_consumers, + struct regulator_bulk_data *consumers, enum regulator_get_type get_type) +{ + int i; + int ret; + + for (i = 0; i < num_consumers; i++) + consumers[i].consumer = NULL; + + for (i = 0; i < num_consumers; i++) { + consumers[i].consumer = _regulator_get(dev, + consumers[i].supply, get_type); + if (IS_ERR(consumers[i].consumer)) { + ret = dev_err_probe(dev, PTR_ERR(consumers[i].consumer), + "Failed to get supply '%s'", + consumers[i].supply); + consumers[i].consumer = NULL; + goto err; + } + + if (consumers[i].init_load_uA > 0) { + ret = regulator_set_load(consumers[i].consumer, + consumers[i].init_load_uA); + if (ret) { + i++; + goto err; + } + } + } + + return 0; + +err: + while (--i >= 0) + regulator_put(consumers[i].consumer); + + return ret; +} + +/** + * regulator_bulk_get - get multiple regulator consumers + * + * @dev: Device to supply + * @num_consumers: Number of consumers to register + * @consumers: Configuration of consumers; clients are stored here. + * + * @return 0 on success, an errno on failure. + * + * This helper function allows drivers to get several regulator + * consumers in one operation. If any of the regulators cannot be + * acquired then any regulators that were allocated will be freed + * before returning to the caller. + */ +int regulator_bulk_get(struct device *dev, int num_consumers, + struct regulator_bulk_data *consumers) +{ + return _regulator_bulk_get(dev, num_consumers, consumers, NORMAL_GET); +} +EXPORT_SYMBOL_GPL(regulator_bulk_get); + +static void regulator_bulk_enable_async(void *data, async_cookie_t cookie) +{ + struct regulator_bulk_data *bulk = data; + + bulk->ret = regulator_enable(bulk->consumer); +} + +/** + * regulator_bulk_enable - enable multiple regulator consumers + * + * @num_consumers: Number of consumers + * @consumers: Consumer data; clients are stored here. + * @return 0 on success, an errno on failure + * + * This convenience API allows consumers to enable multiple regulator + * clients in a single API call. If any consumers cannot be enabled + * then any others that were enabled will be disabled again prior to + * return. + */ +int regulator_bulk_enable(int num_consumers, + struct regulator_bulk_data *consumers) +{ + ASYNC_DOMAIN_EXCLUSIVE(async_domain); + int i; + int ret = 0; + + for (i = 0; i < num_consumers; i++) { + async_schedule_domain(regulator_bulk_enable_async, + &consumers[i], &async_domain); + } + + async_synchronize_full_domain(&async_domain); + + /* If any consumer failed we need to unwind any that succeeded */ + for (i = 0; i < num_consumers; i++) { + if (consumers[i].ret != 0) { + ret = consumers[i].ret; + goto err; + } + } + + return 0; + +err: + for (i = 0; i < num_consumers; i++) { + if (consumers[i].ret < 0) + pr_err("Failed to enable %s: %pe\n", consumers[i].supply, + ERR_PTR(consumers[i].ret)); + else + regulator_disable(consumers[i].consumer); + } + + return ret; +} +EXPORT_SYMBOL_GPL(regulator_bulk_enable); + +/** + * regulator_bulk_disable - disable multiple regulator consumers + * + * @num_consumers: Number of consumers + * @consumers: Consumer data; clients are stored here. + * @return 0 on success, an errno on failure + * + * This convenience API allows consumers to disable multiple regulator + * clients in a single API call. If any consumers cannot be disabled + * then any others that were disabled will be enabled again prior to + * return. + */ +int regulator_bulk_disable(int num_consumers, + struct regulator_bulk_data *consumers) +{ + int i; + int ret, r; + + for (i = num_consumers - 1; i >= 0; --i) { + ret = regulator_disable(consumers[i].consumer); + if (ret != 0) + goto err; + } + + return 0; + +err: + pr_err("Failed to disable %s: %pe\n", consumers[i].supply, ERR_PTR(ret)); + for (++i; i < num_consumers; ++i) { + r = regulator_enable(consumers[i].consumer); + if (r != 0) + pr_err("Failed to re-enable %s: %pe\n", + consumers[i].supply, ERR_PTR(r)); + } + + return ret; +} +EXPORT_SYMBOL_GPL(regulator_bulk_disable); + +/** + * regulator_bulk_force_disable - force disable multiple regulator consumers + * + * @num_consumers: Number of consumers + * @consumers: Consumer data; clients are stored here. + * @return 0 on success, an errno on failure + * + * This convenience API allows consumers to forcibly disable multiple regulator + * clients in a single API call. + * NOTE: This should be used for situations when device damage will + * likely occur if the regulators are not disabled (e.g. over temp). + * Although regulator_force_disable function call for some consumers can + * return error numbers, the function is called for all consumers. + */ +int regulator_bulk_force_disable(int num_consumers, + struct regulator_bulk_data *consumers) +{ + int i; + int ret = 0; + + for (i = 0; i < num_consumers; i++) { + consumers[i].ret = + regulator_force_disable(consumers[i].consumer); + + /* Store first error for reporting */ + if (consumers[i].ret && !ret) + ret = consumers[i].ret; + } + + return ret; +} +EXPORT_SYMBOL_GPL(regulator_bulk_force_disable); + +/** + * regulator_bulk_free - free multiple regulator consumers + * + * @num_consumers: Number of consumers + * @consumers: Consumer data; clients are stored here. + * + * This convenience API allows consumers to free multiple regulator + * clients in a single API call. + */ +void regulator_bulk_free(int num_consumers, + struct regulator_bulk_data *consumers) +{ + int i; + + for (i = 0; i < num_consumers; i++) { + regulator_put(consumers[i].consumer); + consumers[i].consumer = NULL; + } +} +EXPORT_SYMBOL_GPL(regulator_bulk_free); + +/** + * regulator_notifier_call_chain - call regulator event notifier + * @rdev: regulator source + * @event: notifier block + * @data: callback-specific data. + * + * Called by regulator drivers to notify clients a regulator event has + * occurred. + */ +int regulator_notifier_call_chain(struct regulator_dev *rdev, + unsigned long event, void *data) +{ + _notifier_call_chain(rdev, event, data); + return NOTIFY_DONE; + +} +EXPORT_SYMBOL_GPL(regulator_notifier_call_chain); + +/** + * regulator_mode_to_status - convert a regulator mode into a status + * + * @mode: Mode to convert + * + * Convert a regulator mode into a status. + */ +int regulator_mode_to_status(unsigned int mode) +{ + switch (mode) { + case REGULATOR_MODE_FAST: + return REGULATOR_STATUS_FAST; + case REGULATOR_MODE_NORMAL: + return REGULATOR_STATUS_NORMAL; + case REGULATOR_MODE_IDLE: + return REGULATOR_STATUS_IDLE; + case REGULATOR_MODE_STANDBY: + return REGULATOR_STATUS_STANDBY; + default: + return REGULATOR_STATUS_UNDEFINED; + } +} +EXPORT_SYMBOL_GPL(regulator_mode_to_status); + +static struct attribute *regulator_dev_attrs[] = { + &dev_attr_name.attr, + &dev_attr_num_users.attr, + &dev_attr_type.attr, + &dev_attr_microvolts.attr, + &dev_attr_microamps.attr, + &dev_attr_opmode.attr, + &dev_attr_state.attr, + &dev_attr_status.attr, + &dev_attr_bypass.attr, + &dev_attr_requested_microamps.attr, + &dev_attr_min_microvolts.attr, + &dev_attr_max_microvolts.attr, + &dev_attr_min_microamps.attr, + &dev_attr_max_microamps.attr, + &dev_attr_under_voltage.attr, + &dev_attr_over_current.attr, + &dev_attr_regulation_out.attr, + &dev_attr_fail.attr, + &dev_attr_over_temp.attr, + &dev_attr_under_voltage_warn.attr, + &dev_attr_over_current_warn.attr, + &dev_attr_over_voltage_warn.attr, + &dev_attr_over_temp_warn.attr, + &dev_attr_suspend_standby_state.attr, + &dev_attr_suspend_mem_state.attr, + &dev_attr_suspend_disk_state.attr, + &dev_attr_suspend_standby_microvolts.attr, + &dev_attr_suspend_mem_microvolts.attr, + &dev_attr_suspend_disk_microvolts.attr, + &dev_attr_suspend_standby_mode.attr, + &dev_attr_suspend_mem_mode.attr, + &dev_attr_suspend_disk_mode.attr, + NULL +}; + +/* + * To avoid cluttering sysfs (and memory) with useless state, only + * create attributes that can be meaningfully displayed. + */ +static umode_t regulator_attr_is_visible(struct kobject *kobj, + struct attribute *attr, int idx) +{ + struct device *dev = kobj_to_dev(kobj); + struct regulator_dev *rdev = dev_to_rdev(dev); + const struct regulator_ops *ops = rdev->desc->ops; + umode_t mode = attr->mode; + + /* these three are always present */ + if (attr == &dev_attr_name.attr || + attr == &dev_attr_num_users.attr || + attr == &dev_attr_type.attr) + return mode; + + /* some attributes need specific methods to be displayed */ + if (attr == &dev_attr_microvolts.attr) { + if ((ops->get_voltage && ops->get_voltage(rdev) >= 0) || + (ops->get_voltage_sel && ops->get_voltage_sel(rdev) >= 0) || + (ops->list_voltage && ops->list_voltage(rdev, 0) >= 0) || + (rdev->desc->fixed_uV && rdev->desc->n_voltages == 1)) + return mode; + return 0; + } + + if (attr == &dev_attr_microamps.attr) + return ops->get_current_limit ? mode : 0; + + if (attr == &dev_attr_opmode.attr) + return ops->get_mode ? mode : 0; + + if (attr == &dev_attr_state.attr) + return (rdev->ena_pin || ops->is_enabled) ? mode : 0; + + if (attr == &dev_attr_status.attr) + return ops->get_status ? mode : 0; + + if (attr == &dev_attr_bypass.attr) + return ops->get_bypass ? mode : 0; + + if (attr == &dev_attr_under_voltage.attr || + attr == &dev_attr_over_current.attr || + attr == &dev_attr_regulation_out.attr || + attr == &dev_attr_fail.attr || + attr == &dev_attr_over_temp.attr || + attr == &dev_attr_under_voltage_warn.attr || + attr == &dev_attr_over_current_warn.attr || + attr == &dev_attr_over_voltage_warn.attr || + attr == &dev_attr_over_temp_warn.attr) + return ops->get_error_flags ? mode : 0; + + /* constraints need specific supporting methods */ + if (attr == &dev_attr_min_microvolts.attr || + attr == &dev_attr_max_microvolts.attr) + return (ops->set_voltage || ops->set_voltage_sel) ? mode : 0; + + if (attr == &dev_attr_min_microamps.attr || + attr == &dev_attr_max_microamps.attr) + return ops->set_current_limit ? mode : 0; + + if (attr == &dev_attr_suspend_standby_state.attr || + attr == &dev_attr_suspend_mem_state.attr || + attr == &dev_attr_suspend_disk_state.attr) + return mode; + + if (attr == &dev_attr_suspend_standby_microvolts.attr || + attr == &dev_attr_suspend_mem_microvolts.attr || + attr == &dev_attr_suspend_disk_microvolts.attr) + return ops->set_suspend_voltage ? mode : 0; + + if (attr == &dev_attr_suspend_standby_mode.attr || + attr == &dev_attr_suspend_mem_mode.attr || + attr == &dev_attr_suspend_disk_mode.attr) + return ops->set_suspend_mode ? mode : 0; + + return mode; +} + +static const struct attribute_group regulator_dev_group = { + .attrs = regulator_dev_attrs, + .is_visible = regulator_attr_is_visible, +}; + +static const struct attribute_group *regulator_dev_groups[] = { + ®ulator_dev_group, + NULL +}; + +static void regulator_dev_release(struct device *dev) +{ + struct regulator_dev *rdev = dev_get_drvdata(dev); + + debugfs_remove_recursive(rdev->debugfs); + kfree(rdev->constraints); + of_node_put(rdev->dev.of_node); + kfree(rdev); +} + +static void rdev_init_debugfs(struct regulator_dev *rdev) +{ + struct device *parent = rdev->dev.parent; + const char *rname = rdev_get_name(rdev); + char name[NAME_MAX]; + + /* Avoid duplicate debugfs directory names */ + if (parent && rname == rdev->desc->name) { + snprintf(name, sizeof(name), "%s-%s", dev_name(parent), + rname); + rname = name; + } + + rdev->debugfs = debugfs_create_dir(rname, debugfs_root); + if (IS_ERR(rdev->debugfs)) + rdev_dbg(rdev, "Failed to create debugfs directory\n"); + + debugfs_create_u32("use_count", 0444, rdev->debugfs, + &rdev->use_count); + debugfs_create_u32("open_count", 0444, rdev->debugfs, + &rdev->open_count); + debugfs_create_u32("bypass_count", 0444, rdev->debugfs, + &rdev->bypass_count); +} + +static int regulator_register_resolve_supply(struct device *dev, void *data) +{ + struct regulator_dev *rdev = dev_to_rdev(dev); + + if (regulator_resolve_supply(rdev)) + rdev_dbg(rdev, "unable to resolve supply\n"); + + return 0; +} + +int regulator_coupler_register(struct regulator_coupler *coupler) +{ + mutex_lock(®ulator_list_mutex); + list_add_tail(&coupler->list, ®ulator_coupler_list); + mutex_unlock(®ulator_list_mutex); + + return 0; +} + +static struct regulator_coupler * +regulator_find_coupler(struct regulator_dev *rdev) +{ + struct regulator_coupler *coupler; + int err; + + /* + * Note that regulators are appended to the list and the generic + * coupler is registered first, hence it will be attached at last + * if nobody cared. + */ + list_for_each_entry_reverse(coupler, ®ulator_coupler_list, list) { + err = coupler->attach_regulator(coupler, rdev); + if (!err) { + if (!coupler->balance_voltage && + rdev->coupling_desc.n_coupled > 2) + goto err_unsupported; + + return coupler; + } + + if (err < 0) + return ERR_PTR(err); + + if (err == 1) + continue; + + break; + } + + return ERR_PTR(-EINVAL); + +err_unsupported: + if (coupler->detach_regulator) + coupler->detach_regulator(coupler, rdev); + + rdev_err(rdev, + "Voltage balancing for multiple regulator couples is unimplemented\n"); + + return ERR_PTR(-EPERM); +} + +static void regulator_resolve_coupling(struct regulator_dev *rdev) +{ + struct regulator_coupler *coupler = rdev->coupling_desc.coupler; + struct coupling_desc *c_desc = &rdev->coupling_desc; + int n_coupled = c_desc->n_coupled; + struct regulator_dev *c_rdev; + int i; + + for (i = 1; i < n_coupled; i++) { + /* already resolved */ + if (c_desc->coupled_rdevs[i]) + continue; + + c_rdev = of_parse_coupled_regulator(rdev, i - 1); + + if (!c_rdev) + continue; + + if (c_rdev->coupling_desc.coupler != coupler) { + rdev_err(rdev, "coupler mismatch with %s\n", + rdev_get_name(c_rdev)); + return; + } + + c_desc->coupled_rdevs[i] = c_rdev; + c_desc->n_resolved++; + + regulator_resolve_coupling(c_rdev); + } +} + +static void regulator_remove_coupling(struct regulator_dev *rdev) +{ + struct regulator_coupler *coupler = rdev->coupling_desc.coupler; + struct coupling_desc *__c_desc, *c_desc = &rdev->coupling_desc; + struct regulator_dev *__c_rdev, *c_rdev; + unsigned int __n_coupled, n_coupled; + int i, k; + int err; + + n_coupled = c_desc->n_coupled; + + for (i = 1; i < n_coupled; i++) { + c_rdev = c_desc->coupled_rdevs[i]; + + if (!c_rdev) + continue; + + regulator_lock(c_rdev); + + __c_desc = &c_rdev->coupling_desc; + __n_coupled = __c_desc->n_coupled; + + for (k = 1; k < __n_coupled; k++) { + __c_rdev = __c_desc->coupled_rdevs[k]; + + if (__c_rdev == rdev) { + __c_desc->coupled_rdevs[k] = NULL; + __c_desc->n_resolved--; + break; + } + } + + regulator_unlock(c_rdev); + + c_desc->coupled_rdevs[i] = NULL; + c_desc->n_resolved--; + } + + if (coupler && coupler->detach_regulator) { + err = coupler->detach_regulator(coupler, rdev); + if (err) + rdev_err(rdev, "failed to detach from coupler: %pe\n", + ERR_PTR(err)); + } + + kfree(rdev->coupling_desc.coupled_rdevs); + rdev->coupling_desc.coupled_rdevs = NULL; +} + +static int regulator_init_coupling(struct regulator_dev *rdev) +{ + struct regulator_dev **coupled; + int err, n_phandles; + + if (!IS_ENABLED(CONFIG_OF)) + n_phandles = 0; + else + n_phandles = of_get_n_coupled(rdev); + + coupled = kcalloc(n_phandles + 1, sizeof(*coupled), GFP_KERNEL); + if (!coupled) + return -ENOMEM; + + rdev->coupling_desc.coupled_rdevs = coupled; + + /* + * Every regulator should always have coupling descriptor filled with + * at least pointer to itself. + */ + rdev->coupling_desc.coupled_rdevs[0] = rdev; + rdev->coupling_desc.n_coupled = n_phandles + 1; + rdev->coupling_desc.n_resolved++; + + /* regulator isn't coupled */ + if (n_phandles == 0) + return 0; + + if (!of_check_coupling_data(rdev)) + return -EPERM; + + mutex_lock(®ulator_list_mutex); + rdev->coupling_desc.coupler = regulator_find_coupler(rdev); + mutex_unlock(®ulator_list_mutex); + + if (IS_ERR(rdev->coupling_desc.coupler)) { + err = PTR_ERR(rdev->coupling_desc.coupler); + rdev_err(rdev, "failed to get coupler: %pe\n", ERR_PTR(err)); + return err; + } + + return 0; +} + +static int generic_coupler_attach(struct regulator_coupler *coupler, + struct regulator_dev *rdev) +{ + if (rdev->coupling_desc.n_coupled > 2) { + rdev_err(rdev, + "Voltage balancing for multiple regulator couples is unimplemented\n"); + return -EPERM; + } + + if (!rdev->constraints->always_on) { + rdev_err(rdev, + "Coupling of a non always-on regulator is unimplemented\n"); + return -ENOTSUPP; + } + + return 0; +} + +static struct regulator_coupler generic_regulator_coupler = { + .attach_regulator = generic_coupler_attach, +}; + +/** + * regulator_register - register regulator + * @dev: the device that drive the regulator + * @regulator_desc: regulator to register + * @cfg: runtime configuration for regulator + * + * Called by regulator drivers to register a regulator. + * Returns a valid pointer to struct regulator_dev on success + * or an ERR_PTR() on error. + */ +struct regulator_dev * +regulator_register(struct device *dev, + const struct regulator_desc *regulator_desc, + const struct regulator_config *cfg) +{ + const struct regulator_init_data *init_data; + struct regulator_config *config = NULL; + static atomic_t regulator_no = ATOMIC_INIT(-1); + struct regulator_dev *rdev; + bool dangling_cfg_gpiod = false; + bool dangling_of_gpiod = false; + int ret, i; + bool resolved_early = false; + + if (cfg == NULL) + return ERR_PTR(-EINVAL); + if (cfg->ena_gpiod) + dangling_cfg_gpiod = true; + if (regulator_desc == NULL) { + ret = -EINVAL; + goto rinse; + } + + WARN_ON(!dev || !cfg->dev); + + if (regulator_desc->name == NULL || regulator_desc->ops == NULL) { + ret = -EINVAL; + goto rinse; + } + + if (regulator_desc->type != REGULATOR_VOLTAGE && + regulator_desc->type != REGULATOR_CURRENT) { + ret = -EINVAL; + goto rinse; + } + + /* Only one of each should be implemented */ + WARN_ON(regulator_desc->ops->get_voltage && + regulator_desc->ops->get_voltage_sel); + WARN_ON(regulator_desc->ops->set_voltage && + regulator_desc->ops->set_voltage_sel); + + /* If we're using selectors we must implement list_voltage. */ + if (regulator_desc->ops->get_voltage_sel && + !regulator_desc->ops->list_voltage) { + ret = -EINVAL; + goto rinse; + } + if (regulator_desc->ops->set_voltage_sel && + !regulator_desc->ops->list_voltage) { + ret = -EINVAL; + goto rinse; + } + + rdev = kzalloc(sizeof(struct regulator_dev), GFP_KERNEL); + if (rdev == NULL) { + ret = -ENOMEM; + goto rinse; + } + device_initialize(&rdev->dev); + dev_set_drvdata(&rdev->dev, rdev); + rdev->dev.class = ®ulator_class; + spin_lock_init(&rdev->err_lock); + + /* + * Duplicate the config so the driver could override it after + * parsing init data. + */ + config = kmemdup(cfg, sizeof(*cfg), GFP_KERNEL); + if (config == NULL) { + ret = -ENOMEM; + goto clean; + } + + init_data = regulator_of_get_init_data(dev, regulator_desc, config, + &rdev->dev.of_node); + + /* + * Sometimes not all resources are probed already so we need to take + * that into account. This happens most the time if the ena_gpiod comes + * from a gpio extender or something else. + */ + if (PTR_ERR(init_data) == -EPROBE_DEFER) { + ret = -EPROBE_DEFER; + goto clean; + } + + /* + * We need to keep track of any GPIO descriptor coming from the + * device tree until we have handled it over to the core. If the + * config that was passed in to this function DOES NOT contain + * a descriptor, and the config after this call DOES contain + * a descriptor, we definitely got one from parsing the device + * tree. + */ + if (!cfg->ena_gpiod && config->ena_gpiod) + dangling_of_gpiod = true; + if (!init_data) { + init_data = config->init_data; + rdev->dev.of_node = of_node_get(config->of_node); + } + + ww_mutex_init(&rdev->mutex, ®ulator_ww_class); + rdev->reg_data = config->driver_data; + rdev->owner = regulator_desc->owner; + rdev->desc = regulator_desc; + if (config->regmap) + rdev->regmap = config->regmap; + else if (dev_get_regmap(dev, NULL)) + rdev->regmap = dev_get_regmap(dev, NULL); + else if (dev->parent) + rdev->regmap = dev_get_regmap(dev->parent, NULL); + INIT_LIST_HEAD(&rdev->consumer_list); + INIT_LIST_HEAD(&rdev->list); + BLOCKING_INIT_NOTIFIER_HEAD(&rdev->notifier); + INIT_DELAYED_WORK(&rdev->disable_work, regulator_disable_work); + + if (init_data && init_data->supply_regulator) + rdev->supply_name = init_data->supply_regulator; + else if (regulator_desc->supply_name) + rdev->supply_name = regulator_desc->supply_name; + + /* register with sysfs */ + rdev->dev.parent = config->dev; + dev_set_name(&rdev->dev, "regulator.%lu", + (unsigned long) atomic_inc_return(®ulator_no)); + + /* set regulator constraints */ + if (init_data) + rdev->constraints = kmemdup(&init_data->constraints, + sizeof(*rdev->constraints), + GFP_KERNEL); + else + rdev->constraints = kzalloc(sizeof(*rdev->constraints), + GFP_KERNEL); + if (!rdev->constraints) { + ret = -ENOMEM; + goto wash; + } + + if ((rdev->supply_name && !rdev->supply) && + (rdev->constraints->always_on || + rdev->constraints->boot_on)) { + ret = regulator_resolve_supply(rdev); + if (ret) + rdev_dbg(rdev, "unable to resolve supply early: %pe\n", + ERR_PTR(ret)); + + resolved_early = true; + } + + /* perform any regulator specific init */ + if (init_data && init_data->regulator_init) { + ret = init_data->regulator_init(rdev->reg_data); + if (ret < 0) + goto wash; + } + + if (config->ena_gpiod) { + ret = regulator_ena_gpio_request(rdev, config); + if (ret != 0) { + rdev_err(rdev, "Failed to request enable GPIO: %pe\n", + ERR_PTR(ret)); + goto wash; + } + /* The regulator core took over the GPIO descriptor */ + dangling_cfg_gpiod = false; + dangling_of_gpiod = false; + } + + ret = set_machine_constraints(rdev); + if (ret == -EPROBE_DEFER && !resolved_early) { + /* Regulator might be in bypass mode and so needs its supply + * to set the constraints + */ + /* FIXME: this currently triggers a chicken-and-egg problem + * when creating -SUPPLY symlink in sysfs to a regulator + * that is just being created + */ + rdev_dbg(rdev, "will resolve supply early: %s\n", + rdev->supply_name); + ret = regulator_resolve_supply(rdev); + if (!ret) + ret = set_machine_constraints(rdev); + else + rdev_dbg(rdev, "unable to resolve supply early: %pe\n", + ERR_PTR(ret)); + } + if (ret < 0) + goto wash; + + ret = regulator_init_coupling(rdev); + if (ret < 0) + goto wash; + + /* add consumers devices */ + if (init_data) { + for (i = 0; i < init_data->num_consumer_supplies; i++) { + ret = set_consumer_device_supply(rdev, + init_data->consumer_supplies[i].dev_name, + init_data->consumer_supplies[i].supply); + if (ret < 0) { + dev_err(dev, "Failed to set supply %s\n", + init_data->consumer_supplies[i].supply); + goto unset_supplies; + } + } + } + + if (!rdev->desc->ops->get_voltage && + !rdev->desc->ops->list_voltage && + !rdev->desc->fixed_uV) + rdev->is_switch = true; + + ret = device_add(&rdev->dev); + if (ret != 0) + goto unset_supplies; + + rdev_init_debugfs(rdev); + + /* try to resolve regulators coupling since a new one was registered */ + mutex_lock(®ulator_list_mutex); + regulator_resolve_coupling(rdev); + mutex_unlock(®ulator_list_mutex); + + /* try to resolve regulators supply since a new one was registered */ + class_for_each_device(®ulator_class, NULL, NULL, + regulator_register_resolve_supply); + kfree(config); + return rdev; + +unset_supplies: + mutex_lock(®ulator_list_mutex); + unset_regulator_supplies(rdev); + regulator_remove_coupling(rdev); + mutex_unlock(®ulator_list_mutex); +wash: + regulator_put(rdev->supply); + kfree(rdev->coupling_desc.coupled_rdevs); + mutex_lock(®ulator_list_mutex); + regulator_ena_gpio_free(rdev); + mutex_unlock(®ulator_list_mutex); +clean: + if (dangling_of_gpiod) + gpiod_put(config->ena_gpiod); + kfree(config); + put_device(&rdev->dev); +rinse: + if (dangling_cfg_gpiod) + gpiod_put(cfg->ena_gpiod); + return ERR_PTR(ret); +} +EXPORT_SYMBOL_GPL(regulator_register); + +/** + * regulator_unregister - unregister regulator + * @rdev: regulator to unregister + * + * Called by regulator drivers to unregister a regulator. + */ +void regulator_unregister(struct regulator_dev *rdev) +{ + if (rdev == NULL) + return; + + if (rdev->supply) { + while (rdev->use_count--) + regulator_disable(rdev->supply); + regulator_put(rdev->supply); + } + + flush_work(&rdev->disable_work.work); + + mutex_lock(®ulator_list_mutex); + + WARN_ON(rdev->open_count); + regulator_remove_coupling(rdev); + unset_regulator_supplies(rdev); + list_del(&rdev->list); + regulator_ena_gpio_free(rdev); + device_unregister(&rdev->dev); + + mutex_unlock(®ulator_list_mutex); +} +EXPORT_SYMBOL_GPL(regulator_unregister); + +#ifdef CONFIG_SUSPEND +/** + * regulator_suspend - prepare regulators for system wide suspend + * @dev: ``&struct device`` pointer that is passed to _regulator_suspend() + * + * Configure each regulator with it's suspend operating parameters for state. + */ +static int regulator_suspend(struct device *dev) +{ + struct regulator_dev *rdev = dev_to_rdev(dev); + suspend_state_t state = pm_suspend_target_state; + int ret; + const struct regulator_state *rstate; + + rstate = regulator_get_suspend_state_check(rdev, state); + if (!rstate) + return 0; + + regulator_lock(rdev); + ret = __suspend_set_state(rdev, rstate); + regulator_unlock(rdev); + + return ret; +} + +static int regulator_resume(struct device *dev) +{ + suspend_state_t state = pm_suspend_target_state; + struct regulator_dev *rdev = dev_to_rdev(dev); + struct regulator_state *rstate; + int ret = 0; + + rstate = regulator_get_suspend_state(rdev, state); + if (rstate == NULL) + return 0; + + /* Avoid grabbing the lock if we don't need to */ + if (!rdev->desc->ops->resume) + return 0; + + regulator_lock(rdev); + + if (rstate->enabled == ENABLE_IN_SUSPEND || + rstate->enabled == DISABLE_IN_SUSPEND) + ret = rdev->desc->ops->resume(rdev); + + regulator_unlock(rdev); + + return ret; +} +#else /* !CONFIG_SUSPEND */ + +#define regulator_suspend NULL +#define regulator_resume NULL + +#endif /* !CONFIG_SUSPEND */ + +#ifdef CONFIG_PM +static const struct dev_pm_ops __maybe_unused regulator_pm_ops = { + .suspend = regulator_suspend, + .resume = regulator_resume, +}; +#endif + +struct class regulator_class = { + .name = "regulator", + .dev_release = regulator_dev_release, + .dev_groups = regulator_dev_groups, +#ifdef CONFIG_PM + .pm = ®ulator_pm_ops, +#endif +}; +/** + * regulator_has_full_constraints - the system has fully specified constraints + * + * Calling this function will cause the regulator API to disable all + * regulators which have a zero use count and don't have an always_on + * constraint in a late_initcall. + * + * The intention is that this will become the default behaviour in a + * future kernel release so users are encouraged to use this facility + * now. + */ +void regulator_has_full_constraints(void) +{ + has_full_constraints = 1; +} +EXPORT_SYMBOL_GPL(regulator_has_full_constraints); + +/** + * rdev_get_drvdata - get rdev regulator driver data + * @rdev: regulator + * + * Get rdev regulator driver private data. This call can be used in the + * regulator driver context. + */ +void *rdev_get_drvdata(struct regulator_dev *rdev) +{ + return rdev->reg_data; +} +EXPORT_SYMBOL_GPL(rdev_get_drvdata); + +/** + * regulator_get_drvdata - get regulator driver data + * @regulator: regulator + * + * Get regulator driver private data. This call can be used in the consumer + * driver context when non API regulator specific functions need to be called. + */ +void *regulator_get_drvdata(struct regulator *regulator) +{ + return regulator->rdev->reg_data; +} +EXPORT_SYMBOL_GPL(regulator_get_drvdata); + +/** + * regulator_set_drvdata - set regulator driver data + * @regulator: regulator + * @data: data + */ +void regulator_set_drvdata(struct regulator *regulator, void *data) +{ + regulator->rdev->reg_data = data; +} +EXPORT_SYMBOL_GPL(regulator_set_drvdata); + +/** + * rdev_get_id - get regulator ID + * @rdev: regulator + */ +int rdev_get_id(struct regulator_dev *rdev) +{ + return rdev->desc->id; +} +EXPORT_SYMBOL_GPL(rdev_get_id); + +struct device *rdev_get_dev(struct regulator_dev *rdev) +{ + return &rdev->dev; +} +EXPORT_SYMBOL_GPL(rdev_get_dev); + +struct regmap *rdev_get_regmap(struct regulator_dev *rdev) +{ + return rdev->regmap; +} +EXPORT_SYMBOL_GPL(rdev_get_regmap); + +void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data) +{ + return reg_init_data->driver_data; +} +EXPORT_SYMBOL_GPL(regulator_get_init_drvdata); + +#ifdef CONFIG_DEBUG_FS +static int supply_map_show(struct seq_file *sf, void *data) +{ + struct regulator_map *map; + + list_for_each_entry(map, ®ulator_map_list, list) { + seq_printf(sf, "%s -> %s.%s\n", + rdev_get_name(map->regulator), map->dev_name, + map->supply); + } + + return 0; +} +DEFINE_SHOW_ATTRIBUTE(supply_map); + +struct summary_data { + struct seq_file *s; + struct regulator_dev *parent; + int level; +}; + +static void regulator_summary_show_subtree(struct seq_file *s, + struct regulator_dev *rdev, + int level); + +static int regulator_summary_show_children(struct device *dev, void *data) +{ + struct regulator_dev *rdev = dev_to_rdev(dev); + struct summary_data *summary_data = data; + + if (rdev->supply && rdev->supply->rdev == summary_data->parent) + regulator_summary_show_subtree(summary_data->s, rdev, + summary_data->level + 1); + + return 0; +} + +static void regulator_summary_show_subtree(struct seq_file *s, + struct regulator_dev *rdev, + int level) +{ + struct regulation_constraints *c; + struct regulator *consumer; + struct summary_data summary_data; + unsigned int opmode; + + if (!rdev) + return; + + opmode = _regulator_get_mode_unlocked(rdev); + seq_printf(s, "%*s%-*s %3d %4d %6d %7s ", + level * 3 + 1, "", + 30 - level * 3, rdev_get_name(rdev), + rdev->use_count, rdev->open_count, rdev->bypass_count, + regulator_opmode_to_str(opmode)); + + seq_printf(s, "%5dmV ", regulator_get_voltage_rdev(rdev) / 1000); + seq_printf(s, "%5dmA ", + _regulator_get_current_limit_unlocked(rdev) / 1000); + + c = rdev->constraints; + if (c) { + switch (rdev->desc->type) { + case REGULATOR_VOLTAGE: + seq_printf(s, "%5dmV %5dmV ", + c->min_uV / 1000, c->max_uV / 1000); + break; + case REGULATOR_CURRENT: + seq_printf(s, "%5dmA %5dmA ", + c->min_uA / 1000, c->max_uA / 1000); + break; + } + } + + seq_puts(s, "\n"); + + list_for_each_entry(consumer, &rdev->consumer_list, list) { + if (consumer->dev && consumer->dev->class == ®ulator_class) + continue; + + seq_printf(s, "%*s%-*s ", + (level + 1) * 3 + 1, "", + 30 - (level + 1) * 3, + consumer->supply_name ? consumer->supply_name : + consumer->dev ? dev_name(consumer->dev) : "deviceless"); + + switch (rdev->desc->type) { + case REGULATOR_VOLTAGE: + seq_printf(s, "%3d %33dmA%c%5dmV %5dmV", + consumer->enable_count, + consumer->uA_load / 1000, + consumer->uA_load && !consumer->enable_count ? + '*' : ' ', + consumer->voltage[PM_SUSPEND_ON].min_uV / 1000, + consumer->voltage[PM_SUSPEND_ON].max_uV / 1000); + break; + case REGULATOR_CURRENT: + break; + } + + seq_puts(s, "\n"); + } + + summary_data.s = s; + summary_data.level = level; + summary_data.parent = rdev; + + class_for_each_device(®ulator_class, NULL, &summary_data, + regulator_summary_show_children); +} + +struct summary_lock_data { + struct ww_acquire_ctx *ww_ctx; + struct regulator_dev **new_contended_rdev; + struct regulator_dev **old_contended_rdev; +}; + +static int regulator_summary_lock_one(struct device *dev, void *data) +{ + struct regulator_dev *rdev = dev_to_rdev(dev); + struct summary_lock_data *lock_data = data; + int ret = 0; + + if (rdev != *lock_data->old_contended_rdev) { + ret = regulator_lock_nested(rdev, lock_data->ww_ctx); + + if (ret == -EDEADLK) + *lock_data->new_contended_rdev = rdev; + else + WARN_ON_ONCE(ret); + } else { + *lock_data->old_contended_rdev = NULL; + } + + return ret; +} + +static int regulator_summary_unlock_one(struct device *dev, void *data) +{ + struct regulator_dev *rdev = dev_to_rdev(dev); + struct summary_lock_data *lock_data = data; + + if (lock_data) { + if (rdev == *lock_data->new_contended_rdev) + return -EDEADLK; + } + + regulator_unlock(rdev); + + return 0; +} + +static int regulator_summary_lock_all(struct ww_acquire_ctx *ww_ctx, + struct regulator_dev **new_contended_rdev, + struct regulator_dev **old_contended_rdev) +{ + struct summary_lock_data lock_data; + int ret; + + lock_data.ww_ctx = ww_ctx; + lock_data.new_contended_rdev = new_contended_rdev; + lock_data.old_contended_rdev = old_contended_rdev; + + ret = class_for_each_device(®ulator_class, NULL, &lock_data, + regulator_summary_lock_one); + if (ret) + class_for_each_device(®ulator_class, NULL, &lock_data, + regulator_summary_unlock_one); + + return ret; +} + +static void regulator_summary_lock(struct ww_acquire_ctx *ww_ctx) +{ + struct regulator_dev *new_contended_rdev = NULL; + struct regulator_dev *old_contended_rdev = NULL; + int err; + + mutex_lock(®ulator_list_mutex); + + ww_acquire_init(ww_ctx, ®ulator_ww_class); + + do { + if (new_contended_rdev) { + ww_mutex_lock_slow(&new_contended_rdev->mutex, ww_ctx); + old_contended_rdev = new_contended_rdev; + old_contended_rdev->ref_cnt++; + old_contended_rdev->mutex_owner = current; + } + + err = regulator_summary_lock_all(ww_ctx, + &new_contended_rdev, + &old_contended_rdev); + + if (old_contended_rdev) + regulator_unlock(old_contended_rdev); + + } while (err == -EDEADLK); + + ww_acquire_done(ww_ctx); +} + +static void regulator_summary_unlock(struct ww_acquire_ctx *ww_ctx) +{ + class_for_each_device(®ulator_class, NULL, NULL, + regulator_summary_unlock_one); + ww_acquire_fini(ww_ctx); + + mutex_unlock(®ulator_list_mutex); +} + +static int regulator_summary_show_roots(struct device *dev, void *data) +{ + struct regulator_dev *rdev = dev_to_rdev(dev); + struct seq_file *s = data; + + if (!rdev->supply) + regulator_summary_show_subtree(s, rdev, 0); + + return 0; +} + +static int regulator_summary_show(struct seq_file *s, void *data) +{ + struct ww_acquire_ctx ww_ctx; + + seq_puts(s, " regulator use open bypass opmode voltage current min max\n"); + seq_puts(s, "---------------------------------------------------------------------------------------\n"); + + regulator_summary_lock(&ww_ctx); + + class_for_each_device(®ulator_class, NULL, s, + regulator_summary_show_roots); + + regulator_summary_unlock(&ww_ctx); + + return 0; +} +DEFINE_SHOW_ATTRIBUTE(regulator_summary); +#endif /* CONFIG_DEBUG_FS */ + +static int __init regulator_init(void) +{ + int ret; + + ret = class_register(®ulator_class); + + debugfs_root = debugfs_create_dir("regulator", NULL); + if (IS_ERR(debugfs_root)) + pr_debug("regulator: Failed to create debugfs directory\n"); + +#ifdef CONFIG_DEBUG_FS + debugfs_create_file("supply_map", 0444, debugfs_root, NULL, + &supply_map_fops); + + debugfs_create_file("regulator_summary", 0444, debugfs_root, + NULL, ®ulator_summary_fops); +#endif + regulator_dummy_init(); + + regulator_coupler_register(&generic_regulator_coupler); + + return ret; +} + +/* init early to allow our consumers to complete system booting */ +core_initcall(regulator_init); + +static int regulator_late_cleanup(struct device *dev, void *data) +{ + struct regulator_dev *rdev = dev_to_rdev(dev); + struct regulation_constraints *c = rdev->constraints; + int ret; + + if (c && c->always_on) + return 0; + + if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_STATUS)) + return 0; + + regulator_lock(rdev); + + if (rdev->use_count) + goto unlock; + + /* If reading the status failed, assume that it's off. */ + if (_regulator_is_enabled(rdev) <= 0) + goto unlock; + + if (have_full_constraints()) { + /* We log since this may kill the system if it goes + * wrong. + */ + rdev_info(rdev, "disabling\n"); + ret = _regulator_do_disable(rdev); + if (ret != 0) + rdev_err(rdev, "couldn't disable: %pe\n", ERR_PTR(ret)); + } else { + /* The intention is that in future we will + * assume that full constraints are provided + * so warn even if we aren't going to do + * anything here. + */ + rdev_warn(rdev, "incomplete constraints, leaving on\n"); + } + +unlock: + regulator_unlock(rdev); + + return 0; +} + +static void regulator_init_complete_work_function(struct work_struct *work) +{ + /* + * Regulators may had failed to resolve their input supplies + * when were registered, either because the input supply was + * not registered yet or because its parent device was not + * bound yet. So attempt to resolve the input supplies for + * pending regulators before trying to disable unused ones. + */ + class_for_each_device(®ulator_class, NULL, NULL, + regulator_register_resolve_supply); + + /* If we have a full configuration then disable any regulators + * we have permission to change the status for and which are + * not in use or always_on. This is effectively the default + * for DT and ACPI as they have full constraints. + */ + class_for_each_device(®ulator_class, NULL, NULL, + regulator_late_cleanup); +} + +static DECLARE_DELAYED_WORK(regulator_init_complete_work, + regulator_init_complete_work_function); + +static int __init regulator_init_complete(void) +{ + /* + * Since DT doesn't provide an idiomatic mechanism for + * enabling full constraints and since it's much more natural + * with DT to provide them just assume that a DT enabled + * system has full constraints. + */ + if (of_have_populated_dt()) + has_full_constraints = true; + + /* + * We punt completion for an arbitrary amount of time since + * systems like distros will load many drivers from userspace + * so consumers might not always be ready yet, this is + * particularly an issue with laptops where this might bounce + * the display off then on. Ideally we'd get a notification + * from userspace when this happens but we don't so just wait + * a bit and hope we waited long enough. It'd be better if + * we'd only do this on systems that need it, and a kernel + * command line option might be useful. + */ + schedule_delayed_work(®ulator_init_complete_work, + msecs_to_jiffies(30000)); + + return 0; +} +late_initcall_sync(regulator_init_complete); -- cgit v1.2.3