From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- drivers/scsi/fdomain.h | 114 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 114 insertions(+) create mode 100644 drivers/scsi/fdomain.h (limited to 'drivers/scsi/fdomain.h') diff --git a/drivers/scsi/fdomain.h b/drivers/scsi/fdomain.h new file mode 100644 index 0000000000..93afcee207 --- /dev/null +++ b/drivers/scsi/fdomain.h @@ -0,0 +1,114 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#define FDOMAIN_REGION_SIZE 0x10 +#define FDOMAIN_BIOS_SIZE 0x2000 + +enum { + in_arbitration = 0x02, + in_selection = 0x04, + in_other = 0x08, + disconnect = 0x10, + aborted = 0x20, + sent_ident = 0x40, +}; + +/* (@) = not present on TMC1800, (#) = not present on TMC1800 and TMC18C50 */ +#define REG_SCSI_DATA 0 /* R/W: SCSI Data (with ACK) */ +#define REG_BSTAT 1 /* R: SCSI Bus Status */ +#define BSTAT_BSY BIT(0) /* Busy */ +#define BSTAT_MSG BIT(1) /* Message */ +#define BSTAT_IO BIT(2) /* Input/Output */ +#define BSTAT_CMD BIT(3) /* Command/Data */ +#define BSTAT_REQ BIT(4) /* Request and Not Ack */ +#define BSTAT_SEL BIT(5) /* Select */ +#define BSTAT_ACK BIT(6) /* Acknowledge and Request */ +#define BSTAT_ATN BIT(7) /* Attention */ +#define REG_BCTL 1 /* W: SCSI Bus Control */ +#define BCTL_RST BIT(0) /* Bus Reset */ +#define BCTL_SEL BIT(1) /* Select */ +#define BCTL_BSY BIT(2) /* Busy */ +#define BCTL_ATN BIT(3) /* Attention */ +#define BCTL_IO BIT(4) /* Input/Output */ +#define BCTL_CMD BIT(5) /* Command/Data */ +#define BCTL_MSG BIT(6) /* Message */ +#define BCTL_BUSEN BIT(7) /* Enable bus drivers */ +#define REG_ASTAT 2 /* R: Adapter Status 1 */ +#define ASTAT_IRQ BIT(0) /* Interrupt active */ +#define ASTAT_ARB BIT(1) /* Arbitration complete */ +#define ASTAT_PARERR BIT(2) /* Parity error */ +#define ASTAT_RST BIT(3) /* SCSI reset occurred */ +#define ASTAT_FIFODIR BIT(4) /* FIFO direction */ +#define ASTAT_FIFOEN BIT(5) /* FIFO enabled */ +#define ASTAT_PAREN BIT(6) /* Parity enabled */ +#define ASTAT_BUSEN BIT(7) /* Bus drivers enabled */ +#define REG_ICTL 2 /* W: Interrupt Control */ +#define ICTL_FIFO_MASK 0x0f /* FIFO threshold, 1/16 FIFO size */ +#define ICTL_FIFO BIT(4) /* Int. on FIFO count */ +#define ICTL_ARB BIT(5) /* Int. on Arbitration complete */ +#define ICTL_SEL BIT(6) /* Int. on SCSI Select */ +#define ICTL_REQ BIT(7) /* Int. on SCSI Request */ +#define REG_FSTAT 3 /* R: Adapter Status 2 (FIFO) - (@) */ +#define FSTAT_ONOTEMPTY BIT(0) /* Output FIFO not empty */ +#define FSTAT_INOTEMPTY BIT(1) /* Input FIFO not empty */ +#define FSTAT_NOTEMPTY BIT(2) /* Main FIFO not empty */ +#define FSTAT_NOTFULL BIT(3) /* Main FIFO not full */ +#define REG_MCTL 3 /* W: SCSI Data Mode Control */ +#define MCTL_ACK_MASK 0x0f /* Acknowledge period */ +#define MCTL_ACTDEASS BIT(4) /* Active deassert of REQ and ACK */ +#define MCTL_TARGET BIT(5) /* Enable target mode */ +#define MCTL_FASTSYNC BIT(6) /* Enable Fast Synchronous */ +#define MCTL_SYNC BIT(7) /* Enable Synchronous */ +#define REG_INTCOND 4 /* R: Interrupt Condition - (@) */ +#define IRQ_FIFO BIT(1) /* FIFO interrupt */ +#define IRQ_REQ BIT(2) /* SCSI Request interrupt */ +#define IRQ_SEL BIT(3) /* SCSI Select interrupt */ +#define IRQ_ARB BIT(4) /* SCSI Arbitration interrupt */ +#define IRQ_RST BIT(5) /* SCSI Reset interrupt */ +#define IRQ_FORCED BIT(6) /* Forced interrupt */ +#define IRQ_TIMEOUT BIT(7) /* Bus timeout */ +#define REG_ACTL 4 /* W: Adapter Control 1 */ +#define ACTL_RESET BIT(0) /* Reset FIFO, parity, reset int. */ +#define ACTL_FIRQ BIT(1) /* Set Forced interrupt */ +#define ACTL_ARB BIT(2) /* Initiate Bus Arbitration */ +#define ACTL_PAREN BIT(3) /* Enable SCSI Parity */ +#define ACTL_IRQEN BIT(4) /* Enable interrupts */ +#define ACTL_CLRFIRQ BIT(5) /* Clear Forced interrupt */ +#define ACTL_FIFOWR BIT(6) /* FIFO Direction (1=write) */ +#define ACTL_FIFOEN BIT(7) /* Enable FIFO */ +#define REG_ID_LSB 5 /* R: ID Code (LSB) */ +#define REG_ACTL2 5 /* Adapter Control 2 - (@) */ +#define ACTL2_RAMOVRLY BIT(0) /* Enable RAM overlay */ +#define ACTL2_SLEEP BIT(7) /* Sleep mode */ +#define REG_ID_MSB 6 /* R: ID Code (MSB) */ +#define REG_LOOPBACK 7 /* R/W: Loopback */ +#define REG_SCSI_DATA_NOACK 8 /* R/W: SCSI Data (no ACK) */ +#define REG_ASTAT3 9 /* R: Adapter Status 3 */ +#define ASTAT3_ACTDEASS BIT(0) /* Active deassert enabled */ +#define ASTAT3_RAMOVRLY BIT(1) /* RAM overlay enabled */ +#define ASTAT3_TARGERR BIT(2) /* Target error */ +#define ASTAT3_IRQEN BIT(3) /* Interrupts enabled */ +#define ASTAT3_IRQMASK 0xf0 /* Enabled interrupts mask */ +#define REG_CFG1 10 /* R: Configuration Register 1 */ +#define CFG1_BUS BIT(0) /* 0 = ISA */ +#define CFG1_IRQ_MASK 0x0e /* IRQ jumpers */ +#define CFG1_IO_MASK 0x30 /* I/O base jumpers */ +#define CFG1_BIOS_MASK 0xc0 /* BIOS base jumpers */ +#define REG_CFG2 11 /* R/W: Configuration Register 2 (@) */ +#define CFG2_ROMDIS BIT(0) /* ROM disabled */ +#define CFG2_RAMDIS BIT(1) /* RAM disabled */ +#define CFG2_IRQEDGE BIT(2) /* Edge-triggered interrupts */ +#define CFG2_NOWS BIT(3) /* No wait states */ +#define CFG2_32BIT BIT(7) /* 32-bit mode */ +#define REG_FIFO 12 /* R/W: FIFO */ +#define REG_FIFO_COUNT 14 /* R: FIFO Data Count */ + +#ifdef CONFIG_PM_SLEEP +static const struct dev_pm_ops __maybe_unused fdomain_pm_ops; +#define FDOMAIN_PM_OPS (&fdomain_pm_ops) +#else +#define FDOMAIN_PM_OPS NULL +#endif /* CONFIG_PM_SLEEP */ + +struct Scsi_Host *fdomain_create(int base, int irq, int this_id, + struct device *dev); +int fdomain_destroy(struct Scsi_Host *sh); -- cgit v1.2.3