From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- drivers/spi/spi-orion.c | 863 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 863 insertions(+) create mode 100644 drivers/spi/spi-orion.c (limited to 'drivers/spi/spi-orion.c') diff --git a/drivers/spi/spi-orion.c b/drivers/spi/spi-orion.c new file mode 100644 index 0000000000..1f10f5c8e3 --- /dev/null +++ b/drivers/spi/spi-orion.c @@ -0,0 +1,863 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Marvell Orion SPI controller driver + * + * Author: Shadi Ammouri + * Copyright (C) 2007-2008 Marvell Ltd. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRIVER_NAME "orion_spi" + +/* Runtime PM autosuspend timeout: PM is fairly light on this driver */ +#define SPI_AUTOSUSPEND_TIMEOUT 200 + +/* Some SoCs using this driver support up to 8 chip selects. + * It is up to the implementer to only use the chip selects + * that are available. + */ +#define ORION_NUM_CHIPSELECTS 8 + +#define ORION_SPI_WAIT_RDY_MAX_LOOP 2000 /* in usec */ + +#define ORION_SPI_IF_CTRL_REG 0x00 +#define ORION_SPI_IF_CONFIG_REG 0x04 +#define ORION_SPI_IF_RXLSBF BIT(14) +#define ORION_SPI_IF_TXLSBF BIT(13) +#define ORION_SPI_DATA_OUT_REG 0x08 +#define ORION_SPI_DATA_IN_REG 0x0c +#define ORION_SPI_INT_CAUSE_REG 0x10 +#define ORION_SPI_TIMING_PARAMS_REG 0x18 + +/* Register for the "Direct Mode" */ +#define SPI_DIRECT_WRITE_CONFIG_REG 0x20 + +#define ORION_SPI_TMISO_SAMPLE_MASK (0x3 << 6) +#define ORION_SPI_TMISO_SAMPLE_1 (1 << 6) +#define ORION_SPI_TMISO_SAMPLE_2 (2 << 6) + +#define ORION_SPI_MODE_CPOL (1 << 11) +#define ORION_SPI_MODE_CPHA (1 << 12) +#define ORION_SPI_IF_8_16_BIT_MODE (1 << 5) +#define ORION_SPI_CLK_PRESCALE_MASK 0x1F +#define ARMADA_SPI_CLK_PRESCALE_MASK 0xDF +#define ORION_SPI_MODE_MASK (ORION_SPI_MODE_CPOL | \ + ORION_SPI_MODE_CPHA) +#define ORION_SPI_CS_MASK 0x1C +#define ORION_SPI_CS_SHIFT 2 +#define ORION_SPI_CS(cs) ((cs << ORION_SPI_CS_SHIFT) & \ + ORION_SPI_CS_MASK) + +enum orion_spi_type { + ORION_SPI, + ARMADA_SPI, +}; + +struct orion_spi_dev { + enum orion_spi_type typ; + /* + * min_divisor and max_hz should be exclusive, the only we can + * have both is for managing the armada-370-spi case with old + * device tree + */ + unsigned long max_hz; + unsigned int min_divisor; + unsigned int max_divisor; + u32 prescale_mask; + bool is_errata_50mhz_ac; +}; + +struct orion_direct_acc { + void __iomem *vaddr; + u32 size; +}; + +struct orion_child_options { + struct orion_direct_acc direct_access; +}; + +struct orion_spi { + struct spi_controller *host; + void __iomem *base; + struct clk *clk; + struct clk *axi_clk; + const struct orion_spi_dev *devdata; + struct device *dev; + + struct orion_child_options child[ORION_NUM_CHIPSELECTS]; +}; + +#ifdef CONFIG_PM +static int orion_spi_runtime_suspend(struct device *dev); +static int orion_spi_runtime_resume(struct device *dev); +#endif + +static inline void __iomem *spi_reg(struct orion_spi *orion_spi, u32 reg) +{ + return orion_spi->base + reg; +} + +static inline void +orion_spi_setbits(struct orion_spi *orion_spi, u32 reg, u32 mask) +{ + void __iomem *reg_addr = spi_reg(orion_spi, reg); + u32 val; + + val = readl(reg_addr); + val |= mask; + writel(val, reg_addr); +} + +static inline void +orion_spi_clrbits(struct orion_spi *orion_spi, u32 reg, u32 mask) +{ + void __iomem *reg_addr = spi_reg(orion_spi, reg); + u32 val; + + val = readl(reg_addr); + val &= ~mask; + writel(val, reg_addr); +} + +static int orion_spi_baudrate_set(struct spi_device *spi, unsigned int speed) +{ + u32 tclk_hz; + u32 rate; + u32 prescale; + u32 reg; + struct orion_spi *orion_spi; + const struct orion_spi_dev *devdata; + + orion_spi = spi_controller_get_devdata(spi->controller); + devdata = orion_spi->devdata; + + tclk_hz = clk_get_rate(orion_spi->clk); + + if (devdata->typ == ARMADA_SPI) { + /* + * Given the core_clk (tclk_hz) and the target rate (speed) we + * determine the best values for SPR (in [0 .. 15]) and SPPR (in + * [0..7]) such that + * + * core_clk / (SPR * 2 ** SPPR) + * + * is as big as possible but not bigger than speed. + */ + + /* best integer divider: */ + unsigned divider = DIV_ROUND_UP(tclk_hz, speed); + unsigned spr, sppr; + + if (divider < 16) { + /* This is the easy case, divider is less than 16 */ + spr = divider; + sppr = 0; + + } else { + unsigned two_pow_sppr; + /* + * Find the highest bit set in divider. This and the + * three next bits define SPR (apart from rounding). + * SPPR is then the number of zero bits that must be + * appended: + */ + sppr = fls(divider) - 4; + + /* + * As SPR only has 4 bits, we have to round divider up + * to the next multiple of 2 ** sppr. + */ + two_pow_sppr = 1 << sppr; + divider = (divider + two_pow_sppr - 1) & -two_pow_sppr; + + /* + * recalculate sppr as rounding up divider might have + * increased it enough to change the position of the + * highest set bit. In this case the bit that now + * doesn't make it into SPR is 0, so there is no need to + * round again. + */ + sppr = fls(divider) - 4; + spr = divider >> sppr; + + /* + * Now do range checking. SPR is constructed to have a + * width of 4 bits, so this is fine for sure. So we + * still need to check for sppr to fit into 3 bits: + */ + if (sppr > 7) + return -EINVAL; + } + + prescale = ((sppr & 0x6) << 5) | ((sppr & 0x1) << 4) | spr; + } else { + /* + * the supported rates are: 4,6,8...30 + * round up as we look for equal or less speed + */ + rate = DIV_ROUND_UP(tclk_hz, speed); + rate = roundup(rate, 2); + + /* check if requested speed is too small */ + if (rate > 30) + return -EINVAL; + + if (rate < 4) + rate = 4; + + /* Convert the rate to SPI clock divisor value. */ + prescale = 0x10 + rate/2; + } + + reg = readl(spi_reg(orion_spi, ORION_SPI_IF_CONFIG_REG)); + reg = ((reg & ~devdata->prescale_mask) | prescale); + writel(reg, spi_reg(orion_spi, ORION_SPI_IF_CONFIG_REG)); + + return 0; +} + +static void +orion_spi_mode_set(struct spi_device *spi) +{ + u32 reg; + struct orion_spi *orion_spi; + + orion_spi = spi_controller_get_devdata(spi->controller); + + reg = readl(spi_reg(orion_spi, ORION_SPI_IF_CONFIG_REG)); + reg &= ~ORION_SPI_MODE_MASK; + if (spi->mode & SPI_CPOL) + reg |= ORION_SPI_MODE_CPOL; + if (spi->mode & SPI_CPHA) + reg |= ORION_SPI_MODE_CPHA; + if (spi->mode & SPI_LSB_FIRST) + reg |= ORION_SPI_IF_RXLSBF | ORION_SPI_IF_TXLSBF; + else + reg &= ~(ORION_SPI_IF_RXLSBF | ORION_SPI_IF_TXLSBF); + + writel(reg, spi_reg(orion_spi, ORION_SPI_IF_CONFIG_REG)); +} + +static void +orion_spi_50mhz_ac_timing_erratum(struct spi_device *spi, unsigned int speed) +{ + u32 reg; + struct orion_spi *orion_spi; + + orion_spi = spi_controller_get_devdata(spi->controller); + + /* + * Erratum description: (Erratum NO. FE-9144572) The device + * SPI interface supports frequencies of up to 50 MHz. + * However, due to this erratum, when the device core clock is + * 250 MHz and the SPI interfaces is configured for 50MHz SPI + * clock and CPOL=CPHA=1 there might occur data corruption on + * reads from the SPI device. + * Erratum Workaround: + * Work in one of the following configurations: + * 1. Set CPOL=CPHA=0 in "SPI Interface Configuration + * Register". + * 2. Set TMISO_SAMPLE value to 0x2 in "SPI Timing Parameters 1 + * Register" before setting the interface. + */ + reg = readl(spi_reg(orion_spi, ORION_SPI_TIMING_PARAMS_REG)); + reg &= ~ORION_SPI_TMISO_SAMPLE_MASK; + + if (clk_get_rate(orion_spi->clk) == 250000000 && + speed == 50000000 && spi->mode & SPI_CPOL && + spi->mode & SPI_CPHA) + reg |= ORION_SPI_TMISO_SAMPLE_2; + else + reg |= ORION_SPI_TMISO_SAMPLE_1; /* This is the default value */ + + writel(reg, spi_reg(orion_spi, ORION_SPI_TIMING_PARAMS_REG)); +} + +/* + * called only when no transfer is active on the bus + */ +static int +orion_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t) +{ + struct orion_spi *orion_spi; + unsigned int speed = spi->max_speed_hz; + unsigned int bits_per_word = spi->bits_per_word; + int rc; + + orion_spi = spi_controller_get_devdata(spi->controller); + + if ((t != NULL) && t->speed_hz) + speed = t->speed_hz; + + if ((t != NULL) && t->bits_per_word) + bits_per_word = t->bits_per_word; + + orion_spi_mode_set(spi); + + if (orion_spi->devdata->is_errata_50mhz_ac) + orion_spi_50mhz_ac_timing_erratum(spi, speed); + + rc = orion_spi_baudrate_set(spi, speed); + if (rc) + return rc; + + if (bits_per_word == 16) + orion_spi_setbits(orion_spi, ORION_SPI_IF_CONFIG_REG, + ORION_SPI_IF_8_16_BIT_MODE); + else + orion_spi_clrbits(orion_spi, ORION_SPI_IF_CONFIG_REG, + ORION_SPI_IF_8_16_BIT_MODE); + + return 0; +} + +static void orion_spi_set_cs(struct spi_device *spi, bool enable) +{ + struct orion_spi *orion_spi; + void __iomem *ctrl_reg; + u32 val; + + orion_spi = spi_controller_get_devdata(spi->controller); + ctrl_reg = spi_reg(orion_spi, ORION_SPI_IF_CTRL_REG); + + val = readl(ctrl_reg); + + /* Clear existing chip-select and assertion state */ + val &= ~(ORION_SPI_CS_MASK | 0x1); + + /* + * If this line is using a GPIO to control chip select, this internal + * .set_cs() function will still be called, so we clear any previous + * chip select. The CS we activate will not have any elecrical effect, + * as it is handled by a GPIO, but that doesn't matter. What we need + * is to deassert the old chip select and assert some other chip select. + */ + val |= ORION_SPI_CS(spi_get_chipselect(spi, 0)); + + /* + * Chip select logic is inverted from spi_set_cs(). For lines using a + * GPIO to do chip select SPI_CS_HIGH is enforced and inversion happens + * in the GPIO library, but we don't care about that, because in those + * cases we are dealing with an unused native CS anyways so the polarity + * doesn't matter. + */ + if (!enable) + val |= 0x1; + + /* + * To avoid toggling unwanted chip selects update the register + * with a single write. + */ + writel(val, ctrl_reg); +} + +static inline int orion_spi_wait_till_ready(struct orion_spi *orion_spi) +{ + int i; + + for (i = 0; i < ORION_SPI_WAIT_RDY_MAX_LOOP; i++) { + if (readl(spi_reg(orion_spi, ORION_SPI_INT_CAUSE_REG))) + return 1; + + udelay(1); + } + + return -1; +} + +static inline int +orion_spi_write_read_8bit(struct spi_device *spi, + const u8 **tx_buf, u8 **rx_buf) +{ + void __iomem *tx_reg, *rx_reg, *int_reg; + struct orion_spi *orion_spi; + bool cs_single_byte; + + cs_single_byte = spi->mode & SPI_CS_WORD; + + orion_spi = spi_controller_get_devdata(spi->controller); + + if (cs_single_byte) + orion_spi_set_cs(spi, 0); + + tx_reg = spi_reg(orion_spi, ORION_SPI_DATA_OUT_REG); + rx_reg = spi_reg(orion_spi, ORION_SPI_DATA_IN_REG); + int_reg = spi_reg(orion_spi, ORION_SPI_INT_CAUSE_REG); + + /* clear the interrupt cause register */ + writel(0x0, int_reg); + + if (tx_buf && *tx_buf) + writel(*(*tx_buf)++, tx_reg); + else + writel(0, tx_reg); + + if (orion_spi_wait_till_ready(orion_spi) < 0) { + if (cs_single_byte) { + orion_spi_set_cs(spi, 1); + /* Satisfy some SLIC devices requirements */ + udelay(4); + } + dev_err(&spi->dev, "TXS timed out\n"); + return -1; + } + + if (rx_buf && *rx_buf) + *(*rx_buf)++ = readl(rx_reg); + + if (cs_single_byte) { + orion_spi_set_cs(spi, 1); + /* Satisfy some SLIC devices requirements */ + udelay(4); + } + + return 1; +} + +static inline int +orion_spi_write_read_16bit(struct spi_device *spi, + const u16 **tx_buf, u16 **rx_buf) +{ + void __iomem *tx_reg, *rx_reg, *int_reg; + struct orion_spi *orion_spi; + + if (spi->mode & SPI_CS_WORD) { + dev_err(&spi->dev, "SPI_CS_WORD is only supported for 8 bit words\n"); + return -1; + } + + orion_spi = spi_controller_get_devdata(spi->controller); + tx_reg = spi_reg(orion_spi, ORION_SPI_DATA_OUT_REG); + rx_reg = spi_reg(orion_spi, ORION_SPI_DATA_IN_REG); + int_reg = spi_reg(orion_spi, ORION_SPI_INT_CAUSE_REG); + + /* clear the interrupt cause register */ + writel(0x0, int_reg); + + if (tx_buf && *tx_buf) + writel(__cpu_to_le16(get_unaligned((*tx_buf)++)), tx_reg); + else + writel(0, tx_reg); + + if (orion_spi_wait_till_ready(orion_spi) < 0) { + dev_err(&spi->dev, "TXS timed out\n"); + return -1; + } + + if (rx_buf && *rx_buf) + put_unaligned(__le16_to_cpu(readl(rx_reg)), (*rx_buf)++); + + return 1; +} + +static unsigned int +orion_spi_write_read(struct spi_device *spi, struct spi_transfer *xfer) +{ + unsigned int count; + int word_len; + struct orion_spi *orion_spi; + int cs = spi_get_chipselect(spi, 0); + void __iomem *vaddr; + + word_len = spi->bits_per_word; + count = xfer->len; + + orion_spi = spi_controller_get_devdata(spi->controller); + + /* + * Use SPI direct write mode if base address is available + * and SPI_CS_WORD flag is not set. + * Otherwise fall back to PIO mode for this transfer. + */ + vaddr = orion_spi->child[cs].direct_access.vaddr; + + if (vaddr && xfer->tx_buf && word_len == 8 && (spi->mode & SPI_CS_WORD) == 0) { + unsigned int cnt = count / 4; + unsigned int rem = count % 4; + + /* + * Send the TX-data to the SPI device via the direct + * mapped address window + */ + iowrite32_rep(vaddr, xfer->tx_buf, cnt); + if (rem) { + u32 *buf = (u32 *)xfer->tx_buf; + + iowrite8_rep(vaddr, &buf[cnt], rem); + } + + return count; + } + + if (word_len == 8) { + const u8 *tx = xfer->tx_buf; + u8 *rx = xfer->rx_buf; + + do { + if (orion_spi_write_read_8bit(spi, &tx, &rx) < 0) + goto out; + count--; + spi_delay_exec(&xfer->word_delay, xfer); + } while (count); + } else if (word_len == 16) { + const u16 *tx = xfer->tx_buf; + u16 *rx = xfer->rx_buf; + + do { + if (orion_spi_write_read_16bit(spi, &tx, &rx) < 0) + goto out; + count -= 2; + spi_delay_exec(&xfer->word_delay, xfer); + } while (count); + } + +out: + return xfer->len - count; +} + +static int orion_spi_transfer_one(struct spi_controller *host, + struct spi_device *spi, + struct spi_transfer *t) +{ + int status = 0; + + status = orion_spi_setup_transfer(spi, t); + if (status < 0) + return status; + + if (t->len) + orion_spi_write_read(spi, t); + + return status; +} + +static int orion_spi_setup(struct spi_device *spi) +{ + int ret; +#ifdef CONFIG_PM + struct orion_spi *orion_spi = spi_controller_get_devdata(spi->controller); + struct device *dev = orion_spi->dev; + + orion_spi_runtime_resume(dev); +#endif + + ret = orion_spi_setup_transfer(spi, NULL); + +#ifdef CONFIG_PM + orion_spi_runtime_suspend(dev); +#endif + + return ret; +} + +static int orion_spi_reset(struct orion_spi *orion_spi) +{ + /* Verify that the CS is deasserted */ + orion_spi_clrbits(orion_spi, ORION_SPI_IF_CTRL_REG, 0x1); + + /* Don't deassert CS between the direct mapped SPI transfers */ + writel(0, spi_reg(orion_spi, SPI_DIRECT_WRITE_CONFIG_REG)); + + return 0; +} + +static const struct orion_spi_dev orion_spi_dev_data = { + .typ = ORION_SPI, + .min_divisor = 4, + .max_divisor = 30, + .prescale_mask = ORION_SPI_CLK_PRESCALE_MASK, +}; + +static const struct orion_spi_dev armada_370_spi_dev_data = { + .typ = ARMADA_SPI, + .min_divisor = 4, + .max_divisor = 1920, + .max_hz = 50000000, + .prescale_mask = ARMADA_SPI_CLK_PRESCALE_MASK, +}; + +static const struct orion_spi_dev armada_xp_spi_dev_data = { + .typ = ARMADA_SPI, + .max_hz = 50000000, + .max_divisor = 1920, + .prescale_mask = ARMADA_SPI_CLK_PRESCALE_MASK, +}; + +static const struct orion_spi_dev armada_375_spi_dev_data = { + .typ = ARMADA_SPI, + .min_divisor = 15, + .max_divisor = 1920, + .prescale_mask = ARMADA_SPI_CLK_PRESCALE_MASK, +}; + +static const struct orion_spi_dev armada_380_spi_dev_data = { + .typ = ARMADA_SPI, + .max_hz = 50000000, + .max_divisor = 1920, + .prescale_mask = ARMADA_SPI_CLK_PRESCALE_MASK, + .is_errata_50mhz_ac = true, +}; + +static const struct of_device_id orion_spi_of_match_table[] = { + { + .compatible = "marvell,orion-spi", + .data = &orion_spi_dev_data, + }, + { + .compatible = "marvell,armada-370-spi", + .data = &armada_370_spi_dev_data, + }, + { + .compatible = "marvell,armada-375-spi", + .data = &armada_375_spi_dev_data, + }, + { + .compatible = "marvell,armada-380-spi", + .data = &armada_380_spi_dev_data, + }, + { + .compatible = "marvell,armada-390-spi", + .data = &armada_xp_spi_dev_data, + }, + { + .compatible = "marvell,armada-xp-spi", + .data = &armada_xp_spi_dev_data, + }, + + {} +}; +MODULE_DEVICE_TABLE(of, orion_spi_of_match_table); + +static int orion_spi_probe(struct platform_device *pdev) +{ + const struct orion_spi_dev *devdata; + struct spi_controller *host; + struct orion_spi *spi; + struct resource *r; + unsigned long tclk_hz; + int status = 0; + struct device_node *np; + + host = spi_alloc_host(&pdev->dev, sizeof(*spi)); + if (host == NULL) { + dev_dbg(&pdev->dev, "host allocation failed\n"); + return -ENOMEM; + } + + if (pdev->id != -1) + host->bus_num = pdev->id; + if (pdev->dev.of_node) { + u32 cell_index; + + if (!of_property_read_u32(pdev->dev.of_node, "cell-index", + &cell_index)) + host->bus_num = cell_index; + } + + /* we support all 4 SPI modes and LSB first option */ + host->mode_bits = SPI_CPHA | SPI_CPOL | SPI_LSB_FIRST | SPI_CS_WORD; + host->set_cs = orion_spi_set_cs; + host->transfer_one = orion_spi_transfer_one; + host->num_chipselect = ORION_NUM_CHIPSELECTS; + host->setup = orion_spi_setup; + host->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(16); + host->auto_runtime_pm = true; + host->use_gpio_descriptors = true; + host->flags = SPI_CONTROLLER_GPIO_SS; + + platform_set_drvdata(pdev, host); + + spi = spi_controller_get_devdata(host); + spi->host = host; + spi->dev = &pdev->dev; + + devdata = device_get_match_data(&pdev->dev); + devdata = devdata ? devdata : &orion_spi_dev_data; + spi->devdata = devdata; + + spi->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(spi->clk)) { + status = PTR_ERR(spi->clk); + goto out; + } + + status = clk_prepare_enable(spi->clk); + if (status) + goto out; + + /* The following clock is only used by some SoCs */ + spi->axi_clk = devm_clk_get(&pdev->dev, "axi"); + if (PTR_ERR(spi->axi_clk) == -EPROBE_DEFER) { + status = -EPROBE_DEFER; + goto out_rel_clk; + } + if (!IS_ERR(spi->axi_clk)) + clk_prepare_enable(spi->axi_clk); + + tclk_hz = clk_get_rate(spi->clk); + + /* + * With old device tree, armada-370-spi could be used with + * Armada XP, however for this SoC the maximum frequency is + * 50MHz instead of tclk/4. On Armada 370, tclk cannot be + * higher than 200MHz. So, in order to be able to handle both + * SoCs, we can take the minimum of 50MHz and tclk/4. + */ + if (of_device_is_compatible(pdev->dev.of_node, + "marvell,armada-370-spi")) + host->max_speed_hz = min(devdata->max_hz, + DIV_ROUND_UP(tclk_hz, devdata->min_divisor)); + else if (devdata->min_divisor) + host->max_speed_hz = + DIV_ROUND_UP(tclk_hz, devdata->min_divisor); + else + host->max_speed_hz = devdata->max_hz; + host->min_speed_hz = DIV_ROUND_UP(tclk_hz, devdata->max_divisor); + + spi->base = devm_platform_get_and_ioremap_resource(pdev, 0, &r); + if (IS_ERR(spi->base)) { + status = PTR_ERR(spi->base); + goto out_rel_axi_clk; + } + + for_each_available_child_of_node(pdev->dev.of_node, np) { + struct orion_direct_acc *dir_acc; + u32 cs; + + /* Get chip-select number from the "reg" property */ + status = of_property_read_u32(np, "reg", &cs); + if (status) { + dev_err(&pdev->dev, + "%pOF has no valid 'reg' property (%d)\n", + np, status); + continue; + } + + /* + * Check if an address is configured for this SPI device. If + * not, the MBus mapping via the 'ranges' property in the 'soc' + * node is not configured and this device should not use the + * direct mode. In this case, just continue with the next + * device. + */ + status = of_address_to_resource(pdev->dev.of_node, cs + 1, r); + if (status) + continue; + + /* + * Only map one page for direct access. This is enough for the + * simple TX transfer which only writes to the first word. + * This needs to get extended for the direct SPI NOR / SPI NAND + * support, once this gets implemented. + */ + dir_acc = &spi->child[cs].direct_access; + dir_acc->vaddr = devm_ioremap(&pdev->dev, r->start, PAGE_SIZE); + if (!dir_acc->vaddr) { + status = -ENOMEM; + of_node_put(np); + goto out_rel_axi_clk; + } + dir_acc->size = PAGE_SIZE; + + dev_info(&pdev->dev, "CS%d configured for direct access\n", cs); + } + + pm_runtime_set_active(&pdev->dev); + pm_runtime_use_autosuspend(&pdev->dev); + pm_runtime_set_autosuspend_delay(&pdev->dev, SPI_AUTOSUSPEND_TIMEOUT); + pm_runtime_enable(&pdev->dev); + + status = orion_spi_reset(spi); + if (status < 0) + goto out_rel_pm; + + host->dev.of_node = pdev->dev.of_node; + status = spi_register_controller(host); + if (status < 0) + goto out_rel_pm; + + return status; + +out_rel_pm: + pm_runtime_disable(&pdev->dev); +out_rel_axi_clk: + clk_disable_unprepare(spi->axi_clk); +out_rel_clk: + clk_disable_unprepare(spi->clk); +out: + spi_controller_put(host); + return status; +} + + +static void orion_spi_remove(struct platform_device *pdev) +{ + struct spi_controller *host = platform_get_drvdata(pdev); + struct orion_spi *spi = spi_controller_get_devdata(host); + + pm_runtime_get_sync(&pdev->dev); + clk_disable_unprepare(spi->axi_clk); + clk_disable_unprepare(spi->clk); + + spi_unregister_controller(host); + pm_runtime_disable(&pdev->dev); +} + +MODULE_ALIAS("platform:" DRIVER_NAME); + +#ifdef CONFIG_PM +static int orion_spi_runtime_suspend(struct device *dev) +{ + struct spi_controller *host = dev_get_drvdata(dev); + struct orion_spi *spi = spi_controller_get_devdata(host); + + clk_disable_unprepare(spi->axi_clk); + clk_disable_unprepare(spi->clk); + return 0; +} + +static int orion_spi_runtime_resume(struct device *dev) +{ + struct spi_controller *host = dev_get_drvdata(dev); + struct orion_spi *spi = spi_controller_get_devdata(host); + + if (!IS_ERR(spi->axi_clk)) + clk_prepare_enable(spi->axi_clk); + return clk_prepare_enable(spi->clk); +} +#endif + +static const struct dev_pm_ops orion_spi_pm_ops = { + SET_RUNTIME_PM_OPS(orion_spi_runtime_suspend, + orion_spi_runtime_resume, + NULL) +}; + +static struct platform_driver orion_spi_driver = { + .driver = { + .name = DRIVER_NAME, + .pm = &orion_spi_pm_ops, + .of_match_table = of_match_ptr(orion_spi_of_match_table), + }, + .probe = orion_spi_probe, + .remove_new = orion_spi_remove, +}; + +module_platform_driver(orion_spi_driver); + +MODULE_DESCRIPTION("Orion SPI driver"); +MODULE_AUTHOR("Shadi Ammouri "); +MODULE_LICENSE("GPL"); -- cgit v1.2.3