From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- drivers/thunderbolt/tunnel.c | 2389 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 2389 insertions(+) create mode 100644 drivers/thunderbolt/tunnel.c (limited to 'drivers/thunderbolt/tunnel.c') diff --git a/drivers/thunderbolt/tunnel.c b/drivers/thunderbolt/tunnel.c new file mode 100644 index 000000000..a6810fb36 --- /dev/null +++ b/drivers/thunderbolt/tunnel.c @@ -0,0 +1,2389 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Thunderbolt driver - Tunneling support + * + * Copyright (c) 2014 Andreas Noever + * Copyright (C) 2019, Intel Corporation + */ + +#include +#include +#include +#include +#include + +#include "tunnel.h" +#include "tb.h" + +/* PCIe adapters use always HopID of 8 for both directions */ +#define TB_PCI_HOPID 8 + +#define TB_PCI_PATH_DOWN 0 +#define TB_PCI_PATH_UP 1 + +/* USB3 adapters use always HopID of 8 for both directions */ +#define TB_USB3_HOPID 8 + +#define TB_USB3_PATH_DOWN 0 +#define TB_USB3_PATH_UP 1 + +/* DP adapters use HopID 8 for AUX and 9 for Video */ +#define TB_DP_AUX_TX_HOPID 8 +#define TB_DP_AUX_RX_HOPID 8 +#define TB_DP_VIDEO_HOPID 9 + +#define TB_DP_VIDEO_PATH_OUT 0 +#define TB_DP_AUX_PATH_OUT 1 +#define TB_DP_AUX_PATH_IN 2 + +/* Minimum number of credits needed for PCIe path */ +#define TB_MIN_PCIE_CREDITS 6U +/* + * Number of credits we try to allocate for each DMA path if not limited + * by the host router baMaxHI. + */ +#define TB_DMA_CREDITS 14 +/* Minimum number of credits for DMA path */ +#define TB_MIN_DMA_CREDITS 1 + +static unsigned int dma_credits = TB_DMA_CREDITS; +module_param(dma_credits, uint, 0444); +MODULE_PARM_DESC(dma_credits, "specify custom credits for DMA tunnels (default: " + __MODULE_STRING(TB_DMA_CREDITS) ")"); + +static bool bw_alloc_mode = true; +module_param(bw_alloc_mode, bool, 0444); +MODULE_PARM_DESC(bw_alloc_mode, + "enable bandwidth allocation mode if supported (default: true)"); + +static const char * const tb_tunnel_names[] = { "PCI", "DP", "DMA", "USB3" }; + +#define __TB_TUNNEL_PRINT(level, tunnel, fmt, arg...) \ + do { \ + struct tb_tunnel *__tunnel = (tunnel); \ + level(__tunnel->tb, "%llx:%u <-> %llx:%u (%s): " fmt, \ + tb_route(__tunnel->src_port->sw), \ + __tunnel->src_port->port, \ + tb_route(__tunnel->dst_port->sw), \ + __tunnel->dst_port->port, \ + tb_tunnel_names[__tunnel->type], \ + ## arg); \ + } while (0) + +#define tb_tunnel_WARN(tunnel, fmt, arg...) \ + __TB_TUNNEL_PRINT(tb_WARN, tunnel, fmt, ##arg) +#define tb_tunnel_warn(tunnel, fmt, arg...) \ + __TB_TUNNEL_PRINT(tb_warn, tunnel, fmt, ##arg) +#define tb_tunnel_info(tunnel, fmt, arg...) \ + __TB_TUNNEL_PRINT(tb_info, tunnel, fmt, ##arg) +#define tb_tunnel_dbg(tunnel, fmt, arg...) \ + __TB_TUNNEL_PRINT(tb_dbg, tunnel, fmt, ##arg) + +static inline unsigned int tb_usable_credits(const struct tb_port *port) +{ + return port->total_credits - port->ctl_credits; +} + +/** + * tb_available_credits() - Available credits for PCIe and DMA + * @port: Lane adapter to check + * @max_dp_streams: If non-%NULL stores maximum number of simultaneous DP + * streams possible through this lane adapter + */ +static unsigned int tb_available_credits(const struct tb_port *port, + size_t *max_dp_streams) +{ + const struct tb_switch *sw = port->sw; + int credits, usb3, pcie, spare; + size_t ndp; + + usb3 = tb_acpi_may_tunnel_usb3() ? sw->max_usb3_credits : 0; + pcie = tb_acpi_may_tunnel_pcie() ? sw->max_pcie_credits : 0; + + if (tb_acpi_is_xdomain_allowed()) { + spare = min_not_zero(sw->max_dma_credits, dma_credits); + /* Add some credits for potential second DMA tunnel */ + spare += TB_MIN_DMA_CREDITS; + } else { + spare = 0; + } + + credits = tb_usable_credits(port); + if (tb_acpi_may_tunnel_dp()) { + /* + * Maximum number of DP streams possible through the + * lane adapter. + */ + if (sw->min_dp_aux_credits + sw->min_dp_main_credits) + ndp = (credits - (usb3 + pcie + spare)) / + (sw->min_dp_aux_credits + sw->min_dp_main_credits); + else + ndp = 0; + } else { + ndp = 0; + } + credits -= ndp * (sw->min_dp_aux_credits + sw->min_dp_main_credits); + credits -= usb3; + + if (max_dp_streams) + *max_dp_streams = ndp; + + return credits > 0 ? credits : 0; +} + +static struct tb_tunnel *tb_tunnel_alloc(struct tb *tb, size_t npaths, + enum tb_tunnel_type type) +{ + struct tb_tunnel *tunnel; + + tunnel = kzalloc(sizeof(*tunnel), GFP_KERNEL); + if (!tunnel) + return NULL; + + tunnel->paths = kcalloc(npaths, sizeof(tunnel->paths[0]), GFP_KERNEL); + if (!tunnel->paths) { + tb_tunnel_free(tunnel); + return NULL; + } + + INIT_LIST_HEAD(&tunnel->list); + tunnel->tb = tb; + tunnel->npaths = npaths; + tunnel->type = type; + + return tunnel; +} + +static int tb_pci_set_ext_encapsulation(struct tb_tunnel *tunnel, bool enable) +{ + int ret; + + /* Only supported of both routers are at least USB4 v2 */ + if (usb4_switch_version(tunnel->src_port->sw) < 2 || + usb4_switch_version(tunnel->dst_port->sw) < 2) + return 0; + + ret = usb4_pci_port_set_ext_encapsulation(tunnel->src_port, enable); + if (ret) + return ret; + + ret = usb4_pci_port_set_ext_encapsulation(tunnel->dst_port, enable); + if (ret) + return ret; + + tb_tunnel_dbg(tunnel, "extended encapsulation %s\n", + str_enabled_disabled(enable)); + return 0; +} + +static int tb_pci_activate(struct tb_tunnel *tunnel, bool activate) +{ + int res; + + if (activate) { + res = tb_pci_set_ext_encapsulation(tunnel, activate); + if (res) + return res; + } + + res = tb_pci_port_enable(tunnel->src_port, activate); + if (res) + return res; + + if (tb_port_is_pcie_up(tunnel->dst_port)) { + res = tb_pci_port_enable(tunnel->dst_port, activate); + if (res) + return res; + } + + return activate ? 0 : tb_pci_set_ext_encapsulation(tunnel, activate); +} + +static int tb_pci_init_credits(struct tb_path_hop *hop) +{ + struct tb_port *port = hop->in_port; + struct tb_switch *sw = port->sw; + unsigned int credits; + + if (tb_port_use_credit_allocation(port)) { + unsigned int available; + + available = tb_available_credits(port, NULL); + credits = min(sw->max_pcie_credits, available); + + if (credits < TB_MIN_PCIE_CREDITS) + return -ENOSPC; + + credits = max(TB_MIN_PCIE_CREDITS, credits); + } else { + if (tb_port_is_null(port)) + credits = port->bonded ? 32 : 16; + else + credits = 7; + } + + hop->initial_credits = credits; + return 0; +} + +static int tb_pci_init_path(struct tb_path *path) +{ + struct tb_path_hop *hop; + + path->egress_fc_enable = TB_PATH_SOURCE | TB_PATH_INTERNAL; + path->egress_shared_buffer = TB_PATH_NONE; + path->ingress_fc_enable = TB_PATH_ALL; + path->ingress_shared_buffer = TB_PATH_NONE; + path->priority = 3; + path->weight = 1; + path->drop_packages = 0; + + tb_path_for_each_hop(path, hop) { + int ret; + + ret = tb_pci_init_credits(hop); + if (ret) + return ret; + } + + return 0; +} + +/** + * tb_tunnel_discover_pci() - Discover existing PCIe tunnels + * @tb: Pointer to the domain structure + * @down: PCIe downstream adapter + * @alloc_hopid: Allocate HopIDs from visited ports + * + * If @down adapter is active, follows the tunnel to the PCIe upstream + * adapter and back. Returns the discovered tunnel or %NULL if there was + * no tunnel. + */ +struct tb_tunnel *tb_tunnel_discover_pci(struct tb *tb, struct tb_port *down, + bool alloc_hopid) +{ + struct tb_tunnel *tunnel; + struct tb_path *path; + + if (!tb_pci_port_is_enabled(down)) + return NULL; + + tunnel = tb_tunnel_alloc(tb, 2, TB_TUNNEL_PCI); + if (!tunnel) + return NULL; + + tunnel->activate = tb_pci_activate; + tunnel->src_port = down; + + /* + * Discover both paths even if they are not complete. We will + * clean them up by calling tb_tunnel_deactivate() below in that + * case. + */ + path = tb_path_discover(down, TB_PCI_HOPID, NULL, -1, + &tunnel->dst_port, "PCIe Up", alloc_hopid); + if (!path) { + /* Just disable the downstream port */ + tb_pci_port_enable(down, false); + goto err_free; + } + tunnel->paths[TB_PCI_PATH_UP] = path; + if (tb_pci_init_path(tunnel->paths[TB_PCI_PATH_UP])) + goto err_free; + + path = tb_path_discover(tunnel->dst_port, -1, down, TB_PCI_HOPID, NULL, + "PCIe Down", alloc_hopid); + if (!path) + goto err_deactivate; + tunnel->paths[TB_PCI_PATH_DOWN] = path; + if (tb_pci_init_path(tunnel->paths[TB_PCI_PATH_DOWN])) + goto err_deactivate; + + /* Validate that the tunnel is complete */ + if (!tb_port_is_pcie_up(tunnel->dst_port)) { + tb_port_warn(tunnel->dst_port, + "path does not end on a PCIe adapter, cleaning up\n"); + goto err_deactivate; + } + + if (down != tunnel->src_port) { + tb_tunnel_warn(tunnel, "path is not complete, cleaning up\n"); + goto err_deactivate; + } + + if (!tb_pci_port_is_enabled(tunnel->dst_port)) { + tb_tunnel_warn(tunnel, + "tunnel is not fully activated, cleaning up\n"); + goto err_deactivate; + } + + tb_tunnel_dbg(tunnel, "discovered\n"); + return tunnel; + +err_deactivate: + tb_tunnel_deactivate(tunnel); +err_free: + tb_tunnel_free(tunnel); + + return NULL; +} + +/** + * tb_tunnel_alloc_pci() - allocate a pci tunnel + * @tb: Pointer to the domain structure + * @up: PCIe upstream adapter port + * @down: PCIe downstream adapter port + * + * Allocate a PCI tunnel. The ports must be of type TB_TYPE_PCIE_UP and + * TB_TYPE_PCIE_DOWN. + * + * Return: Returns a tb_tunnel on success or NULL on failure. + */ +struct tb_tunnel *tb_tunnel_alloc_pci(struct tb *tb, struct tb_port *up, + struct tb_port *down) +{ + struct tb_tunnel *tunnel; + struct tb_path *path; + + tunnel = tb_tunnel_alloc(tb, 2, TB_TUNNEL_PCI); + if (!tunnel) + return NULL; + + tunnel->activate = tb_pci_activate; + tunnel->src_port = down; + tunnel->dst_port = up; + + path = tb_path_alloc(tb, down, TB_PCI_HOPID, up, TB_PCI_HOPID, 0, + "PCIe Down"); + if (!path) + goto err_free; + tunnel->paths[TB_PCI_PATH_DOWN] = path; + if (tb_pci_init_path(path)) + goto err_free; + + path = tb_path_alloc(tb, up, TB_PCI_HOPID, down, TB_PCI_HOPID, 0, + "PCIe Up"); + if (!path) + goto err_free; + tunnel->paths[TB_PCI_PATH_UP] = path; + if (tb_pci_init_path(path)) + goto err_free; + + return tunnel; + +err_free: + tb_tunnel_free(tunnel); + return NULL; +} + +static bool tb_dp_is_usb4(const struct tb_switch *sw) +{ + /* Titan Ridge DP adapters need the same treatment as USB4 */ + return tb_switch_is_usb4(sw) || tb_switch_is_titan_ridge(sw); +} + +static int tb_dp_cm_handshake(struct tb_port *in, struct tb_port *out, + int timeout_msec) +{ + ktime_t timeout = ktime_add_ms(ktime_get(), timeout_msec); + u32 val; + int ret; + + /* Both ends need to support this */ + if (!tb_dp_is_usb4(in->sw) || !tb_dp_is_usb4(out->sw)) + return 0; + + ret = tb_port_read(out, &val, TB_CFG_PORT, + out->cap_adap + DP_STATUS_CTRL, 1); + if (ret) + return ret; + + val |= DP_STATUS_CTRL_UF | DP_STATUS_CTRL_CMHS; + + ret = tb_port_write(out, &val, TB_CFG_PORT, + out->cap_adap + DP_STATUS_CTRL, 1); + if (ret) + return ret; + + do { + ret = tb_port_read(out, &val, TB_CFG_PORT, + out->cap_adap + DP_STATUS_CTRL, 1); + if (ret) + return ret; + if (!(val & DP_STATUS_CTRL_CMHS)) + return 0; + usleep_range(100, 150); + } while (ktime_before(ktime_get(), timeout)); + + return -ETIMEDOUT; +} + +/* + * Returns maximum possible rate from capability supporting only DP 2.0 + * and below. Used when DP BW allocation mode is not enabled. + */ +static inline u32 tb_dp_cap_get_rate(u32 val) +{ + u32 rate = (val & DP_COMMON_CAP_RATE_MASK) >> DP_COMMON_CAP_RATE_SHIFT; + + switch (rate) { + case DP_COMMON_CAP_RATE_RBR: + return 1620; + case DP_COMMON_CAP_RATE_HBR: + return 2700; + case DP_COMMON_CAP_RATE_HBR2: + return 5400; + case DP_COMMON_CAP_RATE_HBR3: + return 8100; + default: + return 0; + } +} + +/* + * Returns maximum possible rate from capability supporting DP 2.1 + * UHBR20, 13.5 and 10 rates as well. Use only when DP BW allocation + * mode is enabled. + */ +static inline u32 tb_dp_cap_get_rate_ext(u32 val) +{ + if (val & DP_COMMON_CAP_UHBR20) + return 20000; + else if (val & DP_COMMON_CAP_UHBR13_5) + return 13500; + else if (val & DP_COMMON_CAP_UHBR10) + return 10000; + + return tb_dp_cap_get_rate(val); +} + +static inline bool tb_dp_is_uhbr_rate(unsigned int rate) +{ + return rate >= 10000; +} + +static inline u32 tb_dp_cap_set_rate(u32 val, u32 rate) +{ + val &= ~DP_COMMON_CAP_RATE_MASK; + switch (rate) { + default: + WARN(1, "invalid rate %u passed, defaulting to 1620 MB/s\n", rate); + fallthrough; + case 1620: + val |= DP_COMMON_CAP_RATE_RBR << DP_COMMON_CAP_RATE_SHIFT; + break; + case 2700: + val |= DP_COMMON_CAP_RATE_HBR << DP_COMMON_CAP_RATE_SHIFT; + break; + case 5400: + val |= DP_COMMON_CAP_RATE_HBR2 << DP_COMMON_CAP_RATE_SHIFT; + break; + case 8100: + val |= DP_COMMON_CAP_RATE_HBR3 << DP_COMMON_CAP_RATE_SHIFT; + break; + } + return val; +} + +static inline u32 tb_dp_cap_get_lanes(u32 val) +{ + u32 lanes = (val & DP_COMMON_CAP_LANES_MASK) >> DP_COMMON_CAP_LANES_SHIFT; + + switch (lanes) { + case DP_COMMON_CAP_1_LANE: + return 1; + case DP_COMMON_CAP_2_LANES: + return 2; + case DP_COMMON_CAP_4_LANES: + return 4; + default: + return 0; + } +} + +static inline u32 tb_dp_cap_set_lanes(u32 val, u32 lanes) +{ + val &= ~DP_COMMON_CAP_LANES_MASK; + switch (lanes) { + default: + WARN(1, "invalid number of lanes %u passed, defaulting to 1\n", + lanes); + fallthrough; + case 1: + val |= DP_COMMON_CAP_1_LANE << DP_COMMON_CAP_LANES_SHIFT; + break; + case 2: + val |= DP_COMMON_CAP_2_LANES << DP_COMMON_CAP_LANES_SHIFT; + break; + case 4: + val |= DP_COMMON_CAP_4_LANES << DP_COMMON_CAP_LANES_SHIFT; + break; + } + return val; +} + +static unsigned int tb_dp_bandwidth(unsigned int rate, unsigned int lanes) +{ + /* Tunneling removes the DP 8b/10b 128/132b encoding */ + if (tb_dp_is_uhbr_rate(rate)) + return rate * lanes * 128 / 132; + return rate * lanes * 8 / 10; +} + +static int tb_dp_reduce_bandwidth(int max_bw, u32 in_rate, u32 in_lanes, + u32 out_rate, u32 out_lanes, u32 *new_rate, + u32 *new_lanes) +{ + static const u32 dp_bw[][2] = { + /* Mb/s, lanes */ + { 8100, 4 }, /* 25920 Mb/s */ + { 5400, 4 }, /* 17280 Mb/s */ + { 8100, 2 }, /* 12960 Mb/s */ + { 2700, 4 }, /* 8640 Mb/s */ + { 5400, 2 }, /* 8640 Mb/s */ + { 8100, 1 }, /* 6480 Mb/s */ + { 1620, 4 }, /* 5184 Mb/s */ + { 5400, 1 }, /* 4320 Mb/s */ + { 2700, 2 }, /* 4320 Mb/s */ + { 1620, 2 }, /* 2592 Mb/s */ + { 2700, 1 }, /* 2160 Mb/s */ + { 1620, 1 }, /* 1296 Mb/s */ + }; + unsigned int i; + + /* + * Find a combination that can fit into max_bw and does not + * exceed the maximum rate and lanes supported by the DP OUT and + * DP IN adapters. + */ + for (i = 0; i < ARRAY_SIZE(dp_bw); i++) { + if (dp_bw[i][0] > out_rate || dp_bw[i][1] > out_lanes) + continue; + + if (dp_bw[i][0] > in_rate || dp_bw[i][1] > in_lanes) + continue; + + if (tb_dp_bandwidth(dp_bw[i][0], dp_bw[i][1]) <= max_bw) { + *new_rate = dp_bw[i][0]; + *new_lanes = dp_bw[i][1]; + return 0; + } + } + + return -ENOSR; +} + +static int tb_dp_xchg_caps(struct tb_tunnel *tunnel) +{ + u32 out_dp_cap, out_rate, out_lanes, in_dp_cap, in_rate, in_lanes, bw; + struct tb_port *out = tunnel->dst_port; + struct tb_port *in = tunnel->src_port; + int ret, max_bw; + + /* + * Copy DP_LOCAL_CAP register to DP_REMOTE_CAP register for + * newer generation hardware. + */ + if (in->sw->generation < 2 || out->sw->generation < 2) + return 0; + + /* + * Perform connection manager handshake between IN and OUT ports + * before capabilities exchange can take place. + */ + ret = tb_dp_cm_handshake(in, out, 3000); + if (ret) + return ret; + + /* Read both DP_LOCAL_CAP registers */ + ret = tb_port_read(in, &in_dp_cap, TB_CFG_PORT, + in->cap_adap + DP_LOCAL_CAP, 1); + if (ret) + return ret; + + ret = tb_port_read(out, &out_dp_cap, TB_CFG_PORT, + out->cap_adap + DP_LOCAL_CAP, 1); + if (ret) + return ret; + + /* Write IN local caps to OUT remote caps */ + ret = tb_port_write(out, &in_dp_cap, TB_CFG_PORT, + out->cap_adap + DP_REMOTE_CAP, 1); + if (ret) + return ret; + + in_rate = tb_dp_cap_get_rate(in_dp_cap); + in_lanes = tb_dp_cap_get_lanes(in_dp_cap); + tb_port_dbg(in, "maximum supported bandwidth %u Mb/s x%u = %u Mb/s\n", + in_rate, in_lanes, tb_dp_bandwidth(in_rate, in_lanes)); + + /* + * If the tunnel bandwidth is limited (max_bw is set) then see + * if we need to reduce bandwidth to fit there. + */ + out_rate = tb_dp_cap_get_rate(out_dp_cap); + out_lanes = tb_dp_cap_get_lanes(out_dp_cap); + bw = tb_dp_bandwidth(out_rate, out_lanes); + tb_port_dbg(out, "maximum supported bandwidth %u Mb/s x%u = %u Mb/s\n", + out_rate, out_lanes, bw); + + if (in->sw->config.depth < out->sw->config.depth) + max_bw = tunnel->max_down; + else + max_bw = tunnel->max_up; + + if (max_bw && bw > max_bw) { + u32 new_rate, new_lanes, new_bw; + + ret = tb_dp_reduce_bandwidth(max_bw, in_rate, in_lanes, + out_rate, out_lanes, &new_rate, + &new_lanes); + if (ret) { + tb_port_info(out, "not enough bandwidth for DP tunnel\n"); + return ret; + } + + new_bw = tb_dp_bandwidth(new_rate, new_lanes); + tb_port_dbg(out, "bandwidth reduced to %u Mb/s x%u = %u Mb/s\n", + new_rate, new_lanes, new_bw); + + /* + * Set new rate and number of lanes before writing it to + * the IN port remote caps. + */ + out_dp_cap = tb_dp_cap_set_rate(out_dp_cap, new_rate); + out_dp_cap = tb_dp_cap_set_lanes(out_dp_cap, new_lanes); + } + + /* + * Titan Ridge does not disable AUX timers when it gets + * SET_CONFIG with SET_LTTPR_MODE set. This causes problems with + * DP tunneling. + */ + if (tb_route(out->sw) && tb_switch_is_titan_ridge(out->sw)) { + out_dp_cap |= DP_COMMON_CAP_LTTPR_NS; + tb_port_dbg(out, "disabling LTTPR\n"); + } + + return tb_port_write(in, &out_dp_cap, TB_CFG_PORT, + in->cap_adap + DP_REMOTE_CAP, 1); +} + +static int tb_dp_bandwidth_alloc_mode_enable(struct tb_tunnel *tunnel) +{ + int ret, estimated_bw, granularity, tmp; + struct tb_port *out = tunnel->dst_port; + struct tb_port *in = tunnel->src_port; + u32 out_dp_cap, out_rate, out_lanes; + u32 in_dp_cap, in_rate, in_lanes; + u32 rate, lanes; + + if (!bw_alloc_mode) + return 0; + + ret = usb4_dp_port_set_cm_bandwidth_mode_supported(in, true); + if (ret) + return ret; + + ret = usb4_dp_port_set_group_id(in, in->group->index); + if (ret) + return ret; + + /* + * Get the non-reduced rate and lanes based on the lowest + * capability of both adapters. + */ + ret = tb_port_read(in, &in_dp_cap, TB_CFG_PORT, + in->cap_adap + DP_LOCAL_CAP, 1); + if (ret) + return ret; + + ret = tb_port_read(out, &out_dp_cap, TB_CFG_PORT, + out->cap_adap + DP_LOCAL_CAP, 1); + if (ret) + return ret; + + in_rate = tb_dp_cap_get_rate(in_dp_cap); + in_lanes = tb_dp_cap_get_lanes(in_dp_cap); + out_rate = tb_dp_cap_get_rate(out_dp_cap); + out_lanes = tb_dp_cap_get_lanes(out_dp_cap); + + rate = min(in_rate, out_rate); + lanes = min(in_lanes, out_lanes); + tmp = tb_dp_bandwidth(rate, lanes); + + tb_port_dbg(in, "non-reduced bandwidth %u Mb/s x%u = %u Mb/s\n", rate, + lanes, tmp); + + ret = usb4_dp_port_set_nrd(in, rate, lanes); + if (ret) + return ret; + + /* + * Pick up granularity that supports maximum possible bandwidth. + * For that we use the UHBR rates too. + */ + in_rate = tb_dp_cap_get_rate_ext(in_dp_cap); + out_rate = tb_dp_cap_get_rate_ext(out_dp_cap); + rate = min(in_rate, out_rate); + tmp = tb_dp_bandwidth(rate, lanes); + + tb_port_dbg(in, + "maximum bandwidth through allocation mode %u Mb/s x%u = %u Mb/s\n", + rate, lanes, tmp); + + for (granularity = 250; tmp / granularity > 255 && granularity <= 1000; + granularity *= 2) + ; + + tb_port_dbg(in, "granularity %d Mb/s\n", granularity); + + /* + * Returns -EINVAL if granularity above is outside of the + * accepted ranges. + */ + ret = usb4_dp_port_set_granularity(in, granularity); + if (ret) + return ret; + + /* + * Bandwidth estimation is pretty much what we have in + * max_up/down fields. For discovery we just read what the + * estimation was set to. + */ + if (in->sw->config.depth < out->sw->config.depth) + estimated_bw = tunnel->max_down; + else + estimated_bw = tunnel->max_up; + + tb_port_dbg(in, "estimated bandwidth %d Mb/s\n", estimated_bw); + + ret = usb4_dp_port_set_estimated_bandwidth(in, estimated_bw); + if (ret) + return ret; + + /* Initial allocation should be 0 according the spec */ + ret = usb4_dp_port_allocate_bandwidth(in, 0); + if (ret) + return ret; + + tb_port_dbg(in, "bandwidth allocation mode enabled\n"); + return 0; +} + +static int tb_dp_init(struct tb_tunnel *tunnel) +{ + struct tb_port *in = tunnel->src_port; + struct tb_switch *sw = in->sw; + struct tb *tb = in->sw->tb; + int ret; + + ret = tb_dp_xchg_caps(tunnel); + if (ret) + return ret; + + if (!tb_switch_is_usb4(sw)) + return 0; + + if (!usb4_dp_port_bandwidth_mode_supported(in)) + return 0; + + tb_port_dbg(in, "bandwidth allocation mode supported\n"); + + ret = usb4_dp_port_set_cm_id(in, tb->index); + if (ret) + return ret; + + return tb_dp_bandwidth_alloc_mode_enable(tunnel); +} + +static void tb_dp_deinit(struct tb_tunnel *tunnel) +{ + struct tb_port *in = tunnel->src_port; + + if (!usb4_dp_port_bandwidth_mode_supported(in)) + return; + if (usb4_dp_port_bandwidth_mode_enabled(in)) { + usb4_dp_port_set_cm_bandwidth_mode_supported(in, false); + tb_port_dbg(in, "bandwidth allocation mode disabled\n"); + } +} + +static int tb_dp_activate(struct tb_tunnel *tunnel, bool active) +{ + int ret; + + if (active) { + struct tb_path **paths; + int last; + + paths = tunnel->paths; + last = paths[TB_DP_VIDEO_PATH_OUT]->path_length - 1; + + tb_dp_port_set_hops(tunnel->src_port, + paths[TB_DP_VIDEO_PATH_OUT]->hops[0].in_hop_index, + paths[TB_DP_AUX_PATH_OUT]->hops[0].in_hop_index, + paths[TB_DP_AUX_PATH_IN]->hops[last].next_hop_index); + + tb_dp_port_set_hops(tunnel->dst_port, + paths[TB_DP_VIDEO_PATH_OUT]->hops[last].next_hop_index, + paths[TB_DP_AUX_PATH_IN]->hops[0].in_hop_index, + paths[TB_DP_AUX_PATH_OUT]->hops[last].next_hop_index); + } else { + tb_dp_port_hpd_clear(tunnel->src_port); + tb_dp_port_set_hops(tunnel->src_port, 0, 0, 0); + if (tb_port_is_dpout(tunnel->dst_port)) + tb_dp_port_set_hops(tunnel->dst_port, 0, 0, 0); + } + + ret = tb_dp_port_enable(tunnel->src_port, active); + if (ret) + return ret; + + if (tb_port_is_dpout(tunnel->dst_port)) + return tb_dp_port_enable(tunnel->dst_port, active); + + return 0; +} + +/* max_bw is rounded up to next granularity */ +static int tb_dp_bandwidth_mode_maximum_bandwidth(struct tb_tunnel *tunnel, + int *max_bw) +{ + struct tb_port *in = tunnel->src_port; + int ret, rate, lanes, nrd_bw; + u32 cap; + + /* + * DP IN adapter DP_LOCAL_CAP gets updated to the lowest AUX + * read parameter values so this so we can use this to determine + * the maximum possible bandwidth over this link. + * + * See USB4 v2 spec 1.0 10.4.4.5. + */ + ret = tb_port_read(in, &cap, TB_CFG_PORT, + in->cap_adap + DP_LOCAL_CAP, 1); + if (ret) + return ret; + + rate = tb_dp_cap_get_rate_ext(cap); + if (tb_dp_is_uhbr_rate(rate)) { + /* + * When UHBR is used there is no reduction in lanes so + * we can use this directly. + */ + lanes = tb_dp_cap_get_lanes(cap); + } else { + /* + * If there is no UHBR supported then check the + * non-reduced rate and lanes. + */ + ret = usb4_dp_port_nrd(in, &rate, &lanes); + if (ret) + return ret; + } + + nrd_bw = tb_dp_bandwidth(rate, lanes); + + if (max_bw) { + ret = usb4_dp_port_granularity(in); + if (ret < 0) + return ret; + *max_bw = roundup(nrd_bw, ret); + } + + return nrd_bw; +} + +static int tb_dp_bandwidth_mode_consumed_bandwidth(struct tb_tunnel *tunnel, + int *consumed_up, + int *consumed_down) +{ + struct tb_port *out = tunnel->dst_port; + struct tb_port *in = tunnel->src_port; + int ret, allocated_bw, max_bw; + + if (!usb4_dp_port_bandwidth_mode_enabled(in)) + return -EOPNOTSUPP; + + if (!tunnel->bw_mode) + return -EOPNOTSUPP; + + /* Read what was allocated previously if any */ + ret = usb4_dp_port_allocated_bandwidth(in); + if (ret < 0) + return ret; + allocated_bw = ret; + + ret = tb_dp_bandwidth_mode_maximum_bandwidth(tunnel, &max_bw); + if (ret < 0) + return ret; + if (allocated_bw == max_bw) + allocated_bw = ret; + + tb_port_dbg(in, "consumed bandwidth through allocation mode %d Mb/s\n", + allocated_bw); + + if (in->sw->config.depth < out->sw->config.depth) { + *consumed_up = 0; + *consumed_down = allocated_bw; + } else { + *consumed_up = allocated_bw; + *consumed_down = 0; + } + + return 0; +} + +static int tb_dp_allocated_bandwidth(struct tb_tunnel *tunnel, int *allocated_up, + int *allocated_down) +{ + struct tb_port *out = tunnel->dst_port; + struct tb_port *in = tunnel->src_port; + + /* + * If we have already set the allocated bandwidth then use that. + * Otherwise we read it from the DPRX. + */ + if (usb4_dp_port_bandwidth_mode_enabled(in) && tunnel->bw_mode) { + int ret, allocated_bw, max_bw; + + ret = usb4_dp_port_allocated_bandwidth(in); + if (ret < 0) + return ret; + allocated_bw = ret; + + ret = tb_dp_bandwidth_mode_maximum_bandwidth(tunnel, &max_bw); + if (ret < 0) + return ret; + if (allocated_bw == max_bw) + allocated_bw = ret; + + if (in->sw->config.depth < out->sw->config.depth) { + *allocated_up = 0; + *allocated_down = allocated_bw; + } else { + *allocated_up = allocated_bw; + *allocated_down = 0; + } + return 0; + } + + return tunnel->consumed_bandwidth(tunnel, allocated_up, + allocated_down); +} + +static int tb_dp_alloc_bandwidth(struct tb_tunnel *tunnel, int *alloc_up, + int *alloc_down) +{ + struct tb_port *out = tunnel->dst_port; + struct tb_port *in = tunnel->src_port; + int max_bw, ret, tmp; + + if (!usb4_dp_port_bandwidth_mode_enabled(in)) + return -EOPNOTSUPP; + + ret = tb_dp_bandwidth_mode_maximum_bandwidth(tunnel, &max_bw); + if (ret < 0) + return ret; + + if (in->sw->config.depth < out->sw->config.depth) { + tmp = min(*alloc_down, max_bw); + ret = usb4_dp_port_allocate_bandwidth(in, tmp); + if (ret) + return ret; + *alloc_down = tmp; + *alloc_up = 0; + } else { + tmp = min(*alloc_up, max_bw); + ret = usb4_dp_port_allocate_bandwidth(in, tmp); + if (ret) + return ret; + *alloc_down = 0; + *alloc_up = tmp; + } + + /* Now we can use BW mode registers to figure out the bandwidth */ + /* TODO: need to handle discovery too */ + tunnel->bw_mode = true; + + tb_port_dbg(in, "allocated bandwidth through allocation mode %d Mb/s\n", + tmp); + return 0; +} + +static int tb_dp_read_dprx(struct tb_tunnel *tunnel, u32 *rate, u32 *lanes, + int timeout_msec) +{ + ktime_t timeout = ktime_add_ms(ktime_get(), timeout_msec); + struct tb_port *in = tunnel->src_port; + + /* + * Wait for DPRX done. Normally it should be already set for + * active tunnel. + */ + do { + u32 val; + int ret; + + ret = tb_port_read(in, &val, TB_CFG_PORT, + in->cap_adap + DP_COMMON_CAP, 1); + if (ret) + return ret; + + if (val & DP_COMMON_CAP_DPRX_DONE) { + *rate = tb_dp_cap_get_rate(val); + *lanes = tb_dp_cap_get_lanes(val); + + tb_port_dbg(in, "consumed bandwidth through DPRX %d Mb/s\n", + tb_dp_bandwidth(*rate, *lanes)); + return 0; + } + usleep_range(100, 150); + } while (ktime_before(ktime_get(), timeout)); + + return -ETIMEDOUT; +} + +/* Read cap from tunnel DP IN */ +static int tb_dp_read_cap(struct tb_tunnel *tunnel, unsigned int cap, u32 *rate, + u32 *lanes) +{ + struct tb_port *in = tunnel->src_port; + u32 val; + int ret; + + switch (cap) { + case DP_LOCAL_CAP: + case DP_REMOTE_CAP: + break; + + default: + tb_tunnel_WARN(tunnel, "invalid capability index %#x\n", cap); + return -EINVAL; + } + + /* + * Read from the copied remote cap so that we take into account + * if capabilities were reduced during exchange. + */ + ret = tb_port_read(in, &val, TB_CFG_PORT, in->cap_adap + cap, 1); + if (ret) + return ret; + + *rate = tb_dp_cap_get_rate(val); + *lanes = tb_dp_cap_get_lanes(val); + + tb_port_dbg(in, "bandwidth from %#x capability %d Mb/s\n", cap, + tb_dp_bandwidth(*rate, *lanes)); + return 0; +} + +static int tb_dp_maximum_bandwidth(struct tb_tunnel *tunnel, int *max_up, + int *max_down) +{ + struct tb_port *in = tunnel->src_port; + int ret; + + if (!usb4_dp_port_bandwidth_mode_enabled(in)) + return -EOPNOTSUPP; + + ret = tb_dp_bandwidth_mode_maximum_bandwidth(tunnel, NULL); + if (ret < 0) + return ret; + + if (in->sw->config.depth < tunnel->dst_port->sw->config.depth) { + *max_up = 0; + *max_down = ret; + } else { + *max_up = ret; + *max_down = 0; + } + + return 0; +} + +static int tb_dp_consumed_bandwidth(struct tb_tunnel *tunnel, int *consumed_up, + int *consumed_down) +{ + struct tb_port *in = tunnel->src_port; + const struct tb_switch *sw = in->sw; + u32 rate = 0, lanes = 0; + int ret; + + if (tb_dp_is_usb4(sw)) { + /* + * On USB4 routers check if the bandwidth allocation + * mode is enabled first and then read the bandwidth + * through those registers. + */ + ret = tb_dp_bandwidth_mode_consumed_bandwidth(tunnel, consumed_up, + consumed_down); + if (ret < 0) { + if (ret != -EOPNOTSUPP) + return ret; + } else if (!ret) { + return 0; + } + /* + * Then see if the DPRX negotiation is ready and if yes + * return that bandwidth (it may be smaller than the + * reduced one). Otherwise return the remote (possibly + * reduced) caps. + */ + ret = tb_dp_read_dprx(tunnel, &rate, &lanes, 150); + if (ret) { + if (ret == -ETIMEDOUT) + ret = tb_dp_read_cap(tunnel, DP_REMOTE_CAP, + &rate, &lanes); + if (ret) + return ret; + } + } else if (sw->generation >= 2) { + ret = tb_dp_read_cap(tunnel, DP_REMOTE_CAP, &rate, &lanes); + if (ret) + return ret; + } else { + /* No bandwidth management for legacy devices */ + *consumed_up = 0; + *consumed_down = 0; + return 0; + } + + if (in->sw->config.depth < tunnel->dst_port->sw->config.depth) { + *consumed_up = 0; + *consumed_down = tb_dp_bandwidth(rate, lanes); + } else { + *consumed_up = tb_dp_bandwidth(rate, lanes); + *consumed_down = 0; + } + + return 0; +} + +static void tb_dp_init_aux_credits(struct tb_path_hop *hop) +{ + struct tb_port *port = hop->in_port; + struct tb_switch *sw = port->sw; + + if (tb_port_use_credit_allocation(port)) + hop->initial_credits = sw->min_dp_aux_credits; + else + hop->initial_credits = 1; +} + +static void tb_dp_init_aux_path(struct tb_path *path) +{ + struct tb_path_hop *hop; + + path->egress_fc_enable = TB_PATH_SOURCE | TB_PATH_INTERNAL; + path->egress_shared_buffer = TB_PATH_NONE; + path->ingress_fc_enable = TB_PATH_ALL; + path->ingress_shared_buffer = TB_PATH_NONE; + path->priority = 2; + path->weight = 1; + + tb_path_for_each_hop(path, hop) + tb_dp_init_aux_credits(hop); +} + +static int tb_dp_init_video_credits(struct tb_path_hop *hop) +{ + struct tb_port *port = hop->in_port; + struct tb_switch *sw = port->sw; + + if (tb_port_use_credit_allocation(port)) { + unsigned int nfc_credits; + size_t max_dp_streams; + + tb_available_credits(port, &max_dp_streams); + /* + * Read the number of currently allocated NFC credits + * from the lane adapter. Since we only use them for DP + * tunneling we can use that to figure out how many DP + * tunnels already go through the lane adapter. + */ + nfc_credits = port->config.nfc_credits & + ADP_CS_4_NFC_BUFFERS_MASK; + if (nfc_credits / sw->min_dp_main_credits > max_dp_streams) + return -ENOSPC; + + hop->nfc_credits = sw->min_dp_main_credits; + } else { + hop->nfc_credits = min(port->total_credits - 2, 12U); + } + + return 0; +} + +static int tb_dp_init_video_path(struct tb_path *path) +{ + struct tb_path_hop *hop; + + path->egress_fc_enable = TB_PATH_NONE; + path->egress_shared_buffer = TB_PATH_NONE; + path->ingress_fc_enable = TB_PATH_NONE; + path->ingress_shared_buffer = TB_PATH_NONE; + path->priority = 1; + path->weight = 1; + + tb_path_for_each_hop(path, hop) { + int ret; + + ret = tb_dp_init_video_credits(hop); + if (ret) + return ret; + } + + return 0; +} + +static void tb_dp_dump(struct tb_tunnel *tunnel) +{ + struct tb_port *in, *out; + u32 dp_cap, rate, lanes; + + in = tunnel->src_port; + out = tunnel->dst_port; + + if (tb_port_read(in, &dp_cap, TB_CFG_PORT, + in->cap_adap + DP_LOCAL_CAP, 1)) + return; + + rate = tb_dp_cap_get_rate(dp_cap); + lanes = tb_dp_cap_get_lanes(dp_cap); + + tb_port_dbg(in, "maximum supported bandwidth %u Mb/s x%u = %u Mb/s\n", + rate, lanes, tb_dp_bandwidth(rate, lanes)); + + out = tunnel->dst_port; + + if (tb_port_read(out, &dp_cap, TB_CFG_PORT, + out->cap_adap + DP_LOCAL_CAP, 1)) + return; + + rate = tb_dp_cap_get_rate(dp_cap); + lanes = tb_dp_cap_get_lanes(dp_cap); + + tb_port_dbg(out, "maximum supported bandwidth %u Mb/s x%u = %u Mb/s\n", + rate, lanes, tb_dp_bandwidth(rate, lanes)); + + if (tb_port_read(in, &dp_cap, TB_CFG_PORT, + in->cap_adap + DP_REMOTE_CAP, 1)) + return; + + rate = tb_dp_cap_get_rate(dp_cap); + lanes = tb_dp_cap_get_lanes(dp_cap); + + tb_port_dbg(in, "reduced bandwidth %u Mb/s x%u = %u Mb/s\n", + rate, lanes, tb_dp_bandwidth(rate, lanes)); +} + +/** + * tb_tunnel_discover_dp() - Discover existing Display Port tunnels + * @tb: Pointer to the domain structure + * @in: DP in adapter + * @alloc_hopid: Allocate HopIDs from visited ports + * + * If @in adapter is active, follows the tunnel to the DP out adapter + * and back. Returns the discovered tunnel or %NULL if there was no + * tunnel. + * + * Return: DP tunnel or %NULL if no tunnel found. + */ +struct tb_tunnel *tb_tunnel_discover_dp(struct tb *tb, struct tb_port *in, + bool alloc_hopid) +{ + struct tb_tunnel *tunnel; + struct tb_port *port; + struct tb_path *path; + + if (!tb_dp_port_is_enabled(in)) + return NULL; + + tunnel = tb_tunnel_alloc(tb, 3, TB_TUNNEL_DP); + if (!tunnel) + return NULL; + + tunnel->init = tb_dp_init; + tunnel->deinit = tb_dp_deinit; + tunnel->activate = tb_dp_activate; + tunnel->maximum_bandwidth = tb_dp_maximum_bandwidth; + tunnel->allocated_bandwidth = tb_dp_allocated_bandwidth; + tunnel->alloc_bandwidth = tb_dp_alloc_bandwidth; + tunnel->consumed_bandwidth = tb_dp_consumed_bandwidth; + tunnel->src_port = in; + + path = tb_path_discover(in, TB_DP_VIDEO_HOPID, NULL, -1, + &tunnel->dst_port, "Video", alloc_hopid); + if (!path) { + /* Just disable the DP IN port */ + tb_dp_port_enable(in, false); + goto err_free; + } + tunnel->paths[TB_DP_VIDEO_PATH_OUT] = path; + if (tb_dp_init_video_path(tunnel->paths[TB_DP_VIDEO_PATH_OUT])) + goto err_free; + + path = tb_path_discover(in, TB_DP_AUX_TX_HOPID, NULL, -1, NULL, "AUX TX", + alloc_hopid); + if (!path) + goto err_deactivate; + tunnel->paths[TB_DP_AUX_PATH_OUT] = path; + tb_dp_init_aux_path(tunnel->paths[TB_DP_AUX_PATH_OUT]); + + path = tb_path_discover(tunnel->dst_port, -1, in, TB_DP_AUX_RX_HOPID, + &port, "AUX RX", alloc_hopid); + if (!path) + goto err_deactivate; + tunnel->paths[TB_DP_AUX_PATH_IN] = path; + tb_dp_init_aux_path(tunnel->paths[TB_DP_AUX_PATH_IN]); + + /* Validate that the tunnel is complete */ + if (!tb_port_is_dpout(tunnel->dst_port)) { + tb_port_warn(in, "path does not end on a DP adapter, cleaning up\n"); + goto err_deactivate; + } + + if (!tb_dp_port_is_enabled(tunnel->dst_port)) + goto err_deactivate; + + if (!tb_dp_port_hpd_is_active(tunnel->dst_port)) + goto err_deactivate; + + if (port != tunnel->src_port) { + tb_tunnel_warn(tunnel, "path is not complete, cleaning up\n"); + goto err_deactivate; + } + + tb_dp_dump(tunnel); + + tb_tunnel_dbg(tunnel, "discovered\n"); + return tunnel; + +err_deactivate: + tb_tunnel_deactivate(tunnel); +err_free: + tb_tunnel_free(tunnel); + + return NULL; +} + +/** + * tb_tunnel_alloc_dp() - allocate a Display Port tunnel + * @tb: Pointer to the domain structure + * @in: DP in adapter port + * @out: DP out adapter port + * @link_nr: Preferred lane adapter when the link is not bonded + * @max_up: Maximum available upstream bandwidth for the DP tunnel (%0 + * if not limited) + * @max_down: Maximum available downstream bandwidth for the DP tunnel + * (%0 if not limited) + * + * Allocates a tunnel between @in and @out that is capable of tunneling + * Display Port traffic. + * + * Return: Returns a tb_tunnel on success or NULL on failure. + */ +struct tb_tunnel *tb_tunnel_alloc_dp(struct tb *tb, struct tb_port *in, + struct tb_port *out, int link_nr, + int max_up, int max_down) +{ + struct tb_tunnel *tunnel; + struct tb_path **paths; + struct tb_path *path; + + if (WARN_ON(!in->cap_adap || !out->cap_adap)) + return NULL; + + tunnel = tb_tunnel_alloc(tb, 3, TB_TUNNEL_DP); + if (!tunnel) + return NULL; + + tunnel->init = tb_dp_init; + tunnel->deinit = tb_dp_deinit; + tunnel->activate = tb_dp_activate; + tunnel->maximum_bandwidth = tb_dp_maximum_bandwidth; + tunnel->allocated_bandwidth = tb_dp_allocated_bandwidth; + tunnel->alloc_bandwidth = tb_dp_alloc_bandwidth; + tunnel->consumed_bandwidth = tb_dp_consumed_bandwidth; + tunnel->src_port = in; + tunnel->dst_port = out; + tunnel->max_up = max_up; + tunnel->max_down = max_down; + + paths = tunnel->paths; + + path = tb_path_alloc(tb, in, TB_DP_VIDEO_HOPID, out, TB_DP_VIDEO_HOPID, + link_nr, "Video"); + if (!path) + goto err_free; + tb_dp_init_video_path(path); + paths[TB_DP_VIDEO_PATH_OUT] = path; + + path = tb_path_alloc(tb, in, TB_DP_AUX_TX_HOPID, out, + TB_DP_AUX_TX_HOPID, link_nr, "AUX TX"); + if (!path) + goto err_free; + tb_dp_init_aux_path(path); + paths[TB_DP_AUX_PATH_OUT] = path; + + path = tb_path_alloc(tb, out, TB_DP_AUX_RX_HOPID, in, + TB_DP_AUX_RX_HOPID, link_nr, "AUX RX"); + if (!path) + goto err_free; + tb_dp_init_aux_path(path); + paths[TB_DP_AUX_PATH_IN] = path; + + return tunnel; + +err_free: + tb_tunnel_free(tunnel); + return NULL; +} + +static unsigned int tb_dma_available_credits(const struct tb_port *port) +{ + const struct tb_switch *sw = port->sw; + int credits; + + credits = tb_available_credits(port, NULL); + if (tb_acpi_may_tunnel_pcie()) + credits -= sw->max_pcie_credits; + credits -= port->dma_credits; + + return credits > 0 ? credits : 0; +} + +static int tb_dma_reserve_credits(struct tb_path_hop *hop, unsigned int credits) +{ + struct tb_port *port = hop->in_port; + + if (tb_port_use_credit_allocation(port)) { + unsigned int available = tb_dma_available_credits(port); + + /* + * Need to have at least TB_MIN_DMA_CREDITS, otherwise + * DMA path cannot be established. + */ + if (available < TB_MIN_DMA_CREDITS) + return -ENOSPC; + + while (credits > available) + credits--; + + tb_port_dbg(port, "reserving %u credits for DMA path\n", + credits); + + port->dma_credits += credits; + } else { + if (tb_port_is_null(port)) + credits = port->bonded ? 14 : 6; + else + credits = min(port->total_credits, credits); + } + + hop->initial_credits = credits; + return 0; +} + +/* Path from lane adapter to NHI */ +static int tb_dma_init_rx_path(struct tb_path *path, unsigned int credits) +{ + struct tb_path_hop *hop; + unsigned int i, tmp; + + path->egress_fc_enable = TB_PATH_SOURCE | TB_PATH_INTERNAL; + path->ingress_fc_enable = TB_PATH_ALL; + path->egress_shared_buffer = TB_PATH_NONE; + path->ingress_shared_buffer = TB_PATH_NONE; + path->priority = 5; + path->weight = 1; + path->clear_fc = true; + + /* + * First lane adapter is the one connected to the remote host. + * We don't tunnel other traffic over this link so can use all + * the credits (except the ones reserved for control traffic). + */ + hop = &path->hops[0]; + tmp = min(tb_usable_credits(hop->in_port), credits); + hop->initial_credits = tmp; + hop->in_port->dma_credits += tmp; + + for (i = 1; i < path->path_length; i++) { + int ret; + + ret = tb_dma_reserve_credits(&path->hops[i], credits); + if (ret) + return ret; + } + + return 0; +} + +/* Path from NHI to lane adapter */ +static int tb_dma_init_tx_path(struct tb_path *path, unsigned int credits) +{ + struct tb_path_hop *hop; + + path->egress_fc_enable = TB_PATH_ALL; + path->ingress_fc_enable = TB_PATH_ALL; + path->egress_shared_buffer = TB_PATH_NONE; + path->ingress_shared_buffer = TB_PATH_NONE; + path->priority = 5; + path->weight = 1; + path->clear_fc = true; + + tb_path_for_each_hop(path, hop) { + int ret; + + ret = tb_dma_reserve_credits(hop, credits); + if (ret) + return ret; + } + + return 0; +} + +static void tb_dma_release_credits(struct tb_path_hop *hop) +{ + struct tb_port *port = hop->in_port; + + if (tb_port_use_credit_allocation(port)) { + port->dma_credits -= hop->initial_credits; + + tb_port_dbg(port, "released %u DMA path credits\n", + hop->initial_credits); + } +} + +static void tb_dma_deinit_path(struct tb_path *path) +{ + struct tb_path_hop *hop; + + tb_path_for_each_hop(path, hop) + tb_dma_release_credits(hop); +} + +static void tb_dma_deinit(struct tb_tunnel *tunnel) +{ + int i; + + for (i = 0; i < tunnel->npaths; i++) { + if (!tunnel->paths[i]) + continue; + tb_dma_deinit_path(tunnel->paths[i]); + } +} + +/** + * tb_tunnel_alloc_dma() - allocate a DMA tunnel + * @tb: Pointer to the domain structure + * @nhi: Host controller port + * @dst: Destination null port which the other domain is connected to + * @transmit_path: HopID used for transmitting packets + * @transmit_ring: NHI ring number used to send packets towards the + * other domain. Set to %-1 if TX path is not needed. + * @receive_path: HopID used for receiving packets + * @receive_ring: NHI ring number used to receive packets from the + * other domain. Set to %-1 if RX path is not needed. + * + * Return: Returns a tb_tunnel on success or NULL on failure. + */ +struct tb_tunnel *tb_tunnel_alloc_dma(struct tb *tb, struct tb_port *nhi, + struct tb_port *dst, int transmit_path, + int transmit_ring, int receive_path, + int receive_ring) +{ + struct tb_tunnel *tunnel; + size_t npaths = 0, i = 0; + struct tb_path *path; + int credits; + + /* Ring 0 is reserved for control channel */ + if (WARN_ON(!receive_ring || !transmit_ring)) + return NULL; + + if (receive_ring > 0) + npaths++; + if (transmit_ring > 0) + npaths++; + + if (WARN_ON(!npaths)) + return NULL; + + tunnel = tb_tunnel_alloc(tb, npaths, TB_TUNNEL_DMA); + if (!tunnel) + return NULL; + + tunnel->src_port = nhi; + tunnel->dst_port = dst; + tunnel->deinit = tb_dma_deinit; + + credits = min_not_zero(dma_credits, nhi->sw->max_dma_credits); + + if (receive_ring > 0) { + path = tb_path_alloc(tb, dst, receive_path, nhi, receive_ring, 0, + "DMA RX"); + if (!path) + goto err_free; + tunnel->paths[i++] = path; + if (tb_dma_init_rx_path(path, credits)) { + tb_tunnel_dbg(tunnel, "not enough buffers for RX path\n"); + goto err_free; + } + } + + if (transmit_ring > 0) { + path = tb_path_alloc(tb, nhi, transmit_ring, dst, transmit_path, 0, + "DMA TX"); + if (!path) + goto err_free; + tunnel->paths[i++] = path; + if (tb_dma_init_tx_path(path, credits)) { + tb_tunnel_dbg(tunnel, "not enough buffers for TX path\n"); + goto err_free; + } + } + + return tunnel; + +err_free: + tb_tunnel_free(tunnel); + return NULL; +} + +/** + * tb_tunnel_match_dma() - Match DMA tunnel + * @tunnel: Tunnel to match + * @transmit_path: HopID used for transmitting packets. Pass %-1 to ignore. + * @transmit_ring: NHI ring number used to send packets towards the + * other domain. Pass %-1 to ignore. + * @receive_path: HopID used for receiving packets. Pass %-1 to ignore. + * @receive_ring: NHI ring number used to receive packets from the + * other domain. Pass %-1 to ignore. + * + * This function can be used to match specific DMA tunnel, if there are + * multiple DMA tunnels going through the same XDomain connection. + * Returns true if there is match and false otherwise. + */ +bool tb_tunnel_match_dma(const struct tb_tunnel *tunnel, int transmit_path, + int transmit_ring, int receive_path, int receive_ring) +{ + const struct tb_path *tx_path = NULL, *rx_path = NULL; + int i; + + if (!receive_ring || !transmit_ring) + return false; + + for (i = 0; i < tunnel->npaths; i++) { + const struct tb_path *path = tunnel->paths[i]; + + if (!path) + continue; + + if (tb_port_is_nhi(path->hops[0].in_port)) + tx_path = path; + else if (tb_port_is_nhi(path->hops[path->path_length - 1].out_port)) + rx_path = path; + } + + if (transmit_ring > 0 || transmit_path > 0) { + if (!tx_path) + return false; + if (transmit_ring > 0 && + (tx_path->hops[0].in_hop_index != transmit_ring)) + return false; + if (transmit_path > 0 && + (tx_path->hops[tx_path->path_length - 1].next_hop_index != transmit_path)) + return false; + } + + if (receive_ring > 0 || receive_path > 0) { + if (!rx_path) + return false; + if (receive_path > 0 && + (rx_path->hops[0].in_hop_index != receive_path)) + return false; + if (receive_ring > 0 && + (rx_path->hops[rx_path->path_length - 1].next_hop_index != receive_ring)) + return false; + } + + return true; +} + +static int tb_usb3_max_link_rate(struct tb_port *up, struct tb_port *down) +{ + int ret, up_max_rate, down_max_rate; + + ret = usb4_usb3_port_max_link_rate(up); + if (ret < 0) + return ret; + up_max_rate = ret; + + ret = usb4_usb3_port_max_link_rate(down); + if (ret < 0) + return ret; + down_max_rate = ret; + + return min(up_max_rate, down_max_rate); +} + +static int tb_usb3_init(struct tb_tunnel *tunnel) +{ + tb_tunnel_dbg(tunnel, "allocating initial bandwidth %d/%d Mb/s\n", + tunnel->allocated_up, tunnel->allocated_down); + + return usb4_usb3_port_allocate_bandwidth(tunnel->src_port, + &tunnel->allocated_up, + &tunnel->allocated_down); +} + +static int tb_usb3_activate(struct tb_tunnel *tunnel, bool activate) +{ + int res; + + res = tb_usb3_port_enable(tunnel->src_port, activate); + if (res) + return res; + + if (tb_port_is_usb3_up(tunnel->dst_port)) + return tb_usb3_port_enable(tunnel->dst_port, activate); + + return 0; +} + +static int tb_usb3_consumed_bandwidth(struct tb_tunnel *tunnel, + int *consumed_up, int *consumed_down) +{ + int pcie_enabled = tb_acpi_may_tunnel_pcie(); + + /* + * PCIe tunneling, if enabled, affects the USB3 bandwidth so + * take that it into account here. + */ + *consumed_up = tunnel->allocated_up * (3 + pcie_enabled) / 3; + *consumed_down = tunnel->allocated_down * (3 + pcie_enabled) / 3; + return 0; +} + +static int tb_usb3_release_unused_bandwidth(struct tb_tunnel *tunnel) +{ + int ret; + + ret = usb4_usb3_port_release_bandwidth(tunnel->src_port, + &tunnel->allocated_up, + &tunnel->allocated_down); + if (ret) + return ret; + + tb_tunnel_dbg(tunnel, "decreased bandwidth allocation to %d/%d Mb/s\n", + tunnel->allocated_up, tunnel->allocated_down); + return 0; +} + +static void tb_usb3_reclaim_available_bandwidth(struct tb_tunnel *tunnel, + int *available_up, + int *available_down) +{ + int ret, max_rate, allocate_up, allocate_down; + + ret = usb4_usb3_port_actual_link_rate(tunnel->src_port); + if (ret < 0) { + tb_tunnel_warn(tunnel, "failed to read actual link rate\n"); + return; + } else if (!ret) { + /* Use maximum link rate if the link valid is not set */ + ret = tb_usb3_max_link_rate(tunnel->dst_port, tunnel->src_port); + if (ret < 0) { + tb_tunnel_warn(tunnel, "failed to read maximum link rate\n"); + return; + } + } + + /* + * 90% of the max rate can be allocated for isochronous + * transfers. + */ + max_rate = ret * 90 / 100; + + /* No need to reclaim if already at maximum */ + if (tunnel->allocated_up >= max_rate && + tunnel->allocated_down >= max_rate) + return; + + /* Don't go lower than what is already allocated */ + allocate_up = min(max_rate, *available_up); + if (allocate_up < tunnel->allocated_up) + allocate_up = tunnel->allocated_up; + + allocate_down = min(max_rate, *available_down); + if (allocate_down < tunnel->allocated_down) + allocate_down = tunnel->allocated_down; + + /* If no changes no need to do more */ + if (allocate_up == tunnel->allocated_up && + allocate_down == tunnel->allocated_down) + return; + + ret = usb4_usb3_port_allocate_bandwidth(tunnel->src_port, &allocate_up, + &allocate_down); + if (ret) { + tb_tunnel_info(tunnel, "failed to allocate bandwidth\n"); + return; + } + + tunnel->allocated_up = allocate_up; + *available_up -= tunnel->allocated_up; + + tunnel->allocated_down = allocate_down; + *available_down -= tunnel->allocated_down; + + tb_tunnel_dbg(tunnel, "increased bandwidth allocation to %d/%d Mb/s\n", + tunnel->allocated_up, tunnel->allocated_down); +} + +static void tb_usb3_init_credits(struct tb_path_hop *hop) +{ + struct tb_port *port = hop->in_port; + struct tb_switch *sw = port->sw; + unsigned int credits; + + if (tb_port_use_credit_allocation(port)) { + credits = sw->max_usb3_credits; + } else { + if (tb_port_is_null(port)) + credits = port->bonded ? 32 : 16; + else + credits = 7; + } + + hop->initial_credits = credits; +} + +static void tb_usb3_init_path(struct tb_path *path) +{ + struct tb_path_hop *hop; + + path->egress_fc_enable = TB_PATH_SOURCE | TB_PATH_INTERNAL; + path->egress_shared_buffer = TB_PATH_NONE; + path->ingress_fc_enable = TB_PATH_ALL; + path->ingress_shared_buffer = TB_PATH_NONE; + path->priority = 3; + path->weight = 3; + path->drop_packages = 0; + + tb_path_for_each_hop(path, hop) + tb_usb3_init_credits(hop); +} + +/** + * tb_tunnel_discover_usb3() - Discover existing USB3 tunnels + * @tb: Pointer to the domain structure + * @down: USB3 downstream adapter + * @alloc_hopid: Allocate HopIDs from visited ports + * + * If @down adapter is active, follows the tunnel to the USB3 upstream + * adapter and back. Returns the discovered tunnel or %NULL if there was + * no tunnel. + */ +struct tb_tunnel *tb_tunnel_discover_usb3(struct tb *tb, struct tb_port *down, + bool alloc_hopid) +{ + struct tb_tunnel *tunnel; + struct tb_path *path; + + if (!tb_usb3_port_is_enabled(down)) + return NULL; + + tunnel = tb_tunnel_alloc(tb, 2, TB_TUNNEL_USB3); + if (!tunnel) + return NULL; + + tunnel->activate = tb_usb3_activate; + tunnel->src_port = down; + + /* + * Discover both paths even if they are not complete. We will + * clean them up by calling tb_tunnel_deactivate() below in that + * case. + */ + path = tb_path_discover(down, TB_USB3_HOPID, NULL, -1, + &tunnel->dst_port, "USB3 Down", alloc_hopid); + if (!path) { + /* Just disable the downstream port */ + tb_usb3_port_enable(down, false); + goto err_free; + } + tunnel->paths[TB_USB3_PATH_DOWN] = path; + tb_usb3_init_path(tunnel->paths[TB_USB3_PATH_DOWN]); + + path = tb_path_discover(tunnel->dst_port, -1, down, TB_USB3_HOPID, NULL, + "USB3 Up", alloc_hopid); + if (!path) + goto err_deactivate; + tunnel->paths[TB_USB3_PATH_UP] = path; + tb_usb3_init_path(tunnel->paths[TB_USB3_PATH_UP]); + + /* Validate that the tunnel is complete */ + if (!tb_port_is_usb3_up(tunnel->dst_port)) { + tb_port_warn(tunnel->dst_port, + "path does not end on an USB3 adapter, cleaning up\n"); + goto err_deactivate; + } + + if (down != tunnel->src_port) { + tb_tunnel_warn(tunnel, "path is not complete, cleaning up\n"); + goto err_deactivate; + } + + if (!tb_usb3_port_is_enabled(tunnel->dst_port)) { + tb_tunnel_warn(tunnel, + "tunnel is not fully activated, cleaning up\n"); + goto err_deactivate; + } + + if (!tb_route(down->sw)) { + int ret; + + /* + * Read the initial bandwidth allocation for the first + * hop tunnel. + */ + ret = usb4_usb3_port_allocated_bandwidth(down, + &tunnel->allocated_up, &tunnel->allocated_down); + if (ret) + goto err_deactivate; + + tb_tunnel_dbg(tunnel, "currently allocated bandwidth %d/%d Mb/s\n", + tunnel->allocated_up, tunnel->allocated_down); + + tunnel->init = tb_usb3_init; + tunnel->consumed_bandwidth = tb_usb3_consumed_bandwidth; + tunnel->release_unused_bandwidth = + tb_usb3_release_unused_bandwidth; + tunnel->reclaim_available_bandwidth = + tb_usb3_reclaim_available_bandwidth; + } + + tb_tunnel_dbg(tunnel, "discovered\n"); + return tunnel; + +err_deactivate: + tb_tunnel_deactivate(tunnel); +err_free: + tb_tunnel_free(tunnel); + + return NULL; +} + +/** + * tb_tunnel_alloc_usb3() - allocate a USB3 tunnel + * @tb: Pointer to the domain structure + * @up: USB3 upstream adapter port + * @down: USB3 downstream adapter port + * @max_up: Maximum available upstream bandwidth for the USB3 tunnel (%0 + * if not limited). + * @max_down: Maximum available downstream bandwidth for the USB3 tunnel + * (%0 if not limited). + * + * Allocate an USB3 tunnel. The ports must be of type @TB_TYPE_USB3_UP and + * @TB_TYPE_USB3_DOWN. + * + * Return: Returns a tb_tunnel on success or %NULL on failure. + */ +struct tb_tunnel *tb_tunnel_alloc_usb3(struct tb *tb, struct tb_port *up, + struct tb_port *down, int max_up, + int max_down) +{ + struct tb_tunnel *tunnel; + struct tb_path *path; + int max_rate = 0; + + /* + * Check that we have enough bandwidth available for the new + * USB3 tunnel. + */ + if (max_up > 0 || max_down > 0) { + max_rate = tb_usb3_max_link_rate(down, up); + if (max_rate < 0) + return NULL; + + /* Only 90% can be allocated for USB3 isochronous transfers */ + max_rate = max_rate * 90 / 100; + tb_port_dbg(up, "required bandwidth for USB3 tunnel %d Mb/s\n", + max_rate); + + if (max_rate > max_up || max_rate > max_down) { + tb_port_warn(up, "not enough bandwidth for USB3 tunnel\n"); + return NULL; + } + } + + tunnel = tb_tunnel_alloc(tb, 2, TB_TUNNEL_USB3); + if (!tunnel) + return NULL; + + tunnel->activate = tb_usb3_activate; + tunnel->src_port = down; + tunnel->dst_port = up; + tunnel->max_up = max_up; + tunnel->max_down = max_down; + + path = tb_path_alloc(tb, down, TB_USB3_HOPID, up, TB_USB3_HOPID, 0, + "USB3 Down"); + if (!path) { + tb_tunnel_free(tunnel); + return NULL; + } + tb_usb3_init_path(path); + tunnel->paths[TB_USB3_PATH_DOWN] = path; + + path = tb_path_alloc(tb, up, TB_USB3_HOPID, down, TB_USB3_HOPID, 0, + "USB3 Up"); + if (!path) { + tb_tunnel_free(tunnel); + return NULL; + } + tb_usb3_init_path(path); + tunnel->paths[TB_USB3_PATH_UP] = path; + + if (!tb_route(down->sw)) { + tunnel->allocated_up = max_rate; + tunnel->allocated_down = max_rate; + + tunnel->init = tb_usb3_init; + tunnel->consumed_bandwidth = tb_usb3_consumed_bandwidth; + tunnel->release_unused_bandwidth = + tb_usb3_release_unused_bandwidth; + tunnel->reclaim_available_bandwidth = + tb_usb3_reclaim_available_bandwidth; + } + + return tunnel; +} + +/** + * tb_tunnel_free() - free a tunnel + * @tunnel: Tunnel to be freed + * + * Frees a tunnel. The tunnel does not need to be deactivated. + */ +void tb_tunnel_free(struct tb_tunnel *tunnel) +{ + int i; + + if (!tunnel) + return; + + if (tunnel->deinit) + tunnel->deinit(tunnel); + + for (i = 0; i < tunnel->npaths; i++) { + if (tunnel->paths[i]) + tb_path_free(tunnel->paths[i]); + } + + kfree(tunnel->paths); + kfree(tunnel); +} + +/** + * tb_tunnel_is_invalid - check whether an activated path is still valid + * @tunnel: Tunnel to check + */ +bool tb_tunnel_is_invalid(struct tb_tunnel *tunnel) +{ + int i; + + for (i = 0; i < tunnel->npaths; i++) { + WARN_ON(!tunnel->paths[i]->activated); + if (tb_path_is_invalid(tunnel->paths[i])) + return true; + } + + return false; +} + +/** + * tb_tunnel_restart() - activate a tunnel after a hardware reset + * @tunnel: Tunnel to restart + * + * Return: 0 on success and negative errno in case if failure + */ +int tb_tunnel_restart(struct tb_tunnel *tunnel) +{ + int res, i; + + tb_tunnel_dbg(tunnel, "activating\n"); + + /* + * Make sure all paths are properly disabled before enabling + * them again. + */ + for (i = 0; i < tunnel->npaths; i++) { + if (tunnel->paths[i]->activated) { + tb_path_deactivate(tunnel->paths[i]); + tunnel->paths[i]->activated = false; + } + } + + if (tunnel->init) { + res = tunnel->init(tunnel); + if (res) + return res; + } + + for (i = 0; i < tunnel->npaths; i++) { + res = tb_path_activate(tunnel->paths[i]); + if (res) + goto err; + } + + if (tunnel->activate) { + res = tunnel->activate(tunnel, true); + if (res) + goto err; + } + + return 0; + +err: + tb_tunnel_warn(tunnel, "activation failed\n"); + tb_tunnel_deactivate(tunnel); + return res; +} + +/** + * tb_tunnel_activate() - activate a tunnel + * @tunnel: Tunnel to activate + * + * Return: Returns 0 on success or an error code on failure. + */ +int tb_tunnel_activate(struct tb_tunnel *tunnel) +{ + int i; + + for (i = 0; i < tunnel->npaths; i++) { + if (tunnel->paths[i]->activated) { + tb_tunnel_WARN(tunnel, + "trying to activate an already activated tunnel\n"); + return -EINVAL; + } + } + + return tb_tunnel_restart(tunnel); +} + +/** + * tb_tunnel_deactivate() - deactivate a tunnel + * @tunnel: Tunnel to deactivate + */ +void tb_tunnel_deactivate(struct tb_tunnel *tunnel) +{ + int i; + + tb_tunnel_dbg(tunnel, "deactivating\n"); + + if (tunnel->activate) + tunnel->activate(tunnel, false); + + for (i = 0; i < tunnel->npaths; i++) { + if (tunnel->paths[i] && tunnel->paths[i]->activated) + tb_path_deactivate(tunnel->paths[i]); + } +} + +/** + * tb_tunnel_port_on_path() - Does the tunnel go through port + * @tunnel: Tunnel to check + * @port: Port to check + * + * Returns true if @tunnel goes through @port (direction does not matter), + * false otherwise. + */ +bool tb_tunnel_port_on_path(const struct tb_tunnel *tunnel, + const struct tb_port *port) +{ + int i; + + for (i = 0; i < tunnel->npaths; i++) { + if (!tunnel->paths[i]) + continue; + + if (tb_path_port_on_path(tunnel->paths[i], port)) + return true; + } + + return false; +} + +static bool tb_tunnel_is_active(const struct tb_tunnel *tunnel) +{ + int i; + + for (i = 0; i < tunnel->npaths; i++) { + if (!tunnel->paths[i]) + return false; + if (!tunnel->paths[i]->activated) + return false; + } + + return true; +} + +/** + * tb_tunnel_maximum_bandwidth() - Return maximum possible bandwidth + * @tunnel: Tunnel to check + * @max_up: Maximum upstream bandwidth in Mb/s + * @max_down: Maximum downstream bandwidth in Mb/s + * + * Returns maximum possible bandwidth this tunnel can go if not limited + * by other bandwidth clients. If the tunnel does not support this + * returns %-EOPNOTSUPP. + */ +int tb_tunnel_maximum_bandwidth(struct tb_tunnel *tunnel, int *max_up, + int *max_down) +{ + if (!tb_tunnel_is_active(tunnel)) + return -EINVAL; + + if (tunnel->maximum_bandwidth) + return tunnel->maximum_bandwidth(tunnel, max_up, max_down); + return -EOPNOTSUPP; +} + +/** + * tb_tunnel_allocated_bandwidth() - Return bandwidth allocated for the tunnel + * @tunnel: Tunnel to check + * @allocated_up: Currently allocated upstream bandwidth in Mb/s is stored here + * @allocated_down: Currently allocated downstream bandwidth in Mb/s is + * stored here + * + * Returns the bandwidth allocated for the tunnel. This may be higher + * than what the tunnel actually consumes. + */ +int tb_tunnel_allocated_bandwidth(struct tb_tunnel *tunnel, int *allocated_up, + int *allocated_down) +{ + if (!tb_tunnel_is_active(tunnel)) + return -EINVAL; + + if (tunnel->allocated_bandwidth) + return tunnel->allocated_bandwidth(tunnel, allocated_up, + allocated_down); + return -EOPNOTSUPP; +} + +/** + * tb_tunnel_alloc_bandwidth() - Change tunnel bandwidth allocation + * @tunnel: Tunnel whose bandwidth allocation to change + * @alloc_up: New upstream bandwidth in Mb/s + * @alloc_down: New downstream bandwidth in Mb/s + * + * Tries to change tunnel bandwidth allocation. If succeeds returns %0 + * and updates @alloc_up and @alloc_down to that was actually allocated + * (it may not be the same as passed originally). Returns negative errno + * in case of failure. + */ +int tb_tunnel_alloc_bandwidth(struct tb_tunnel *tunnel, int *alloc_up, + int *alloc_down) +{ + if (!tb_tunnel_is_active(tunnel)) + return -EINVAL; + + if (tunnel->alloc_bandwidth) + return tunnel->alloc_bandwidth(tunnel, alloc_up, alloc_down); + + return -EOPNOTSUPP; +} + +/** + * tb_tunnel_consumed_bandwidth() - Return bandwidth consumed by the tunnel + * @tunnel: Tunnel to check + * @consumed_up: Consumed bandwidth in Mb/s from @dst_port to @src_port. + * Can be %NULL. + * @consumed_down: Consumed bandwidth in Mb/s from @src_port to @dst_port. + * Can be %NULL. + * + * Stores the amount of isochronous bandwidth @tunnel consumes in + * @consumed_up and @consumed_down. In case of success returns %0, + * negative errno otherwise. + */ +int tb_tunnel_consumed_bandwidth(struct tb_tunnel *tunnel, int *consumed_up, + int *consumed_down) +{ + int up_bw = 0, down_bw = 0; + + if (!tb_tunnel_is_active(tunnel)) + goto out; + + if (tunnel->consumed_bandwidth) { + int ret; + + ret = tunnel->consumed_bandwidth(tunnel, &up_bw, &down_bw); + if (ret) + return ret; + + tb_tunnel_dbg(tunnel, "consumed bandwidth %d/%d Mb/s\n", up_bw, + down_bw); + } + +out: + if (consumed_up) + *consumed_up = up_bw; + if (consumed_down) + *consumed_down = down_bw; + + return 0; +} + +/** + * tb_tunnel_release_unused_bandwidth() - Release unused bandwidth + * @tunnel: Tunnel whose unused bandwidth to release + * + * If tunnel supports dynamic bandwidth management (USB3 tunnels at the + * moment) this function makes it to release all the unused bandwidth. + * + * Returns %0 in case of success and negative errno otherwise. + */ +int tb_tunnel_release_unused_bandwidth(struct tb_tunnel *tunnel) +{ + if (!tb_tunnel_is_active(tunnel)) + return 0; + + if (tunnel->release_unused_bandwidth) { + int ret; + + ret = tunnel->release_unused_bandwidth(tunnel); + if (ret) + return ret; + } + + return 0; +} + +/** + * tb_tunnel_reclaim_available_bandwidth() - Reclaim available bandwidth + * @tunnel: Tunnel reclaiming available bandwidth + * @available_up: Available upstream bandwidth (in Mb/s) + * @available_down: Available downstream bandwidth (in Mb/s) + * + * Reclaims bandwidth from @available_up and @available_down and updates + * the variables accordingly (e.g decreases both according to what was + * reclaimed by the tunnel). If nothing was reclaimed the values are + * kept as is. + */ +void tb_tunnel_reclaim_available_bandwidth(struct tb_tunnel *tunnel, + int *available_up, + int *available_down) +{ + if (!tb_tunnel_is_active(tunnel)) + return; + + if (tunnel->reclaim_available_bandwidth) + tunnel->reclaim_available_bandwidth(tunnel, available_up, + available_down); +} -- cgit v1.2.3