From 2957e9a7ea070524508a846205689431cb5c101f Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Mon, 1 Jul 2024 19:13:54 +0200 Subject: Adding upstream version 6.9.7. Signed-off-by: Daniel Baumann --- drivers/tty/serial/8250/8250_bcm7271.c | 101 ++++++++++++++++++++------------- drivers/tty/serial/8250/8250_dw.c | 36 +++++++++++- drivers/tty/serial/8250/8250_dwlib.c | 3 +- drivers/tty/serial/8250/8250_dwlib.h | 33 +---------- drivers/tty/serial/8250/8250_exar.c | 42 ++++++++++++++ drivers/tty/serial/8250/8250_mtk.c | 8 ++- drivers/tty/serial/8250/8250_pxa.c | 1 + 7 files changed, 145 insertions(+), 79 deletions(-) (limited to 'drivers/tty/serial/8250') diff --git a/drivers/tty/serial/8250/8250_bcm7271.c b/drivers/tty/serial/8250/8250_bcm7271.c index 5daa38d9c6..61d81b11f6 100644 --- a/drivers/tty/serial/8250/8250_bcm7271.c +++ b/drivers/tty/serial/8250/8250_bcm7271.c @@ -675,18 +675,46 @@ static void init_real_clk_rates(struct device *dev, struct brcmuart_priv *priv) clk_set_rate(priv->baud_mux_clk, priv->default_mux_rate); } +static u32 find_quot(struct device *dev, u32 freq, u32 baud, u32 *percent) +{ + u32 quot; + u32 rate; + u64 hires_rate; + u64 hires_baud; + u64 hires_err; + + rate = freq / 16; + quot = DIV_ROUND_CLOSEST(rate, baud); + if (!quot) + return 0; + + /* increase resolution to get xx.xx percent */ + hires_rate = div_u64((u64)rate * 10000, (u64)quot); + hires_baud = (u64)baud * 10000; + + /* get the delta */ + if (hires_rate > hires_baud) + hires_err = (hires_rate - hires_baud); + else + hires_err = (hires_baud - hires_rate); + + *percent = (unsigned long)DIV_ROUND_CLOSEST_ULL(hires_err, baud); + + dev_dbg(dev, "Baud rate: %u, MUX Clk: %u, Error: %u.%u%%\n", + baud, freq, *percent / 100, *percent % 100); + + return quot; +} + static void set_clock_mux(struct uart_port *up, struct brcmuart_priv *priv, u32 baud) { u32 percent; u32 best_percent = UINT_MAX; u32 quot; + u32 freq; u32 best_quot = 1; - u32 rate; - int best_index = -1; - u64 hires_rate; - u64 hires_baud; - u64 hires_err; + u32 best_freq = 0; int rc; int i; int real_baud; @@ -695,44 +723,35 @@ static void set_clock_mux(struct uart_port *up, struct brcmuart_priv *priv, if (priv->baud_mux_clk == NULL) return; - /* Find the closest match for specified baud */ - for (i = 0; i < ARRAY_SIZE(priv->real_rates); i++) { - if (priv->real_rates[i] == 0) - continue; - rate = priv->real_rates[i] / 16; - quot = DIV_ROUND_CLOSEST(rate, baud); - if (!quot) - continue; - - /* increase resolution to get xx.xx percent */ - hires_rate = (u64)rate * 10000; - hires_baud = (u64)baud * 10000; - - hires_err = div_u64(hires_rate, (u64)quot); - - /* get the delta */ - if (hires_err > hires_baud) - hires_err = (hires_err - hires_baud); - else - hires_err = (hires_baud - hires_err); - - percent = (unsigned long)DIV_ROUND_CLOSEST_ULL(hires_err, baud); - dev_dbg(up->dev, - "Baud rate: %u, MUX Clk: %u, Error: %u.%u%%\n", - baud, priv->real_rates[i], percent / 100, - percent % 100); - if (percent < best_percent) { - best_percent = percent; - best_index = i; - best_quot = quot; + /* Try default_mux_rate first */ + quot = find_quot(up->dev, priv->default_mux_rate, baud, &percent); + if (quot) { + best_percent = percent; + best_freq = priv->default_mux_rate; + best_quot = quot; + } + /* If more than 1% error, find the closest match for specified baud */ + if (best_percent > 100) { + for (i = 0; i < ARRAY_SIZE(priv->real_rates); i++) { + freq = priv->real_rates[i]; + if (freq == 0 || freq == priv->default_mux_rate) + continue; + quot = find_quot(up->dev, freq, baud, &percent); + if (!quot) + continue; + + if (percent < best_percent) { + best_percent = percent; + best_freq = freq; + best_quot = quot; + } } } - if (best_index == -1) { + if (!best_freq) { dev_err(up->dev, "Error, %d BAUD rate is too fast.\n", baud); return; } - rate = priv->real_rates[best_index]; - rc = clk_set_rate(priv->baud_mux_clk, rate); + rc = clk_set_rate(priv->baud_mux_clk, best_freq); if (rc) dev_err(up->dev, "Error selecting BAUD MUX clock\n"); @@ -741,8 +760,8 @@ static void set_clock_mux(struct uart_port *up, struct brcmuart_priv *priv, dev_err(up->dev, "Error, baud: %d has %u.%u%% error\n", baud, percent / 100, percent % 100); - real_baud = rate / 16 / best_quot; - dev_dbg(up->dev, "Selecting BAUD MUX rate: %u\n", rate); + real_baud = best_freq / 16 / best_quot; + dev_dbg(up->dev, "Selecting BAUD MUX rate: %u\n", best_freq); dev_dbg(up->dev, "Requested baud: %u, Actual baud: %u\n", baud, real_baud); @@ -751,7 +770,7 @@ static void set_clock_mux(struct uart_port *up, struct brcmuart_priv *priv, i += (i / 2); priv->char_wait = ns_to_ktime(i); - up->uartclk = rate; + up->uartclk = best_freq; } static void brcmstb_set_termios(struct uart_port *up, diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index 1300c92b87..a58890fd53 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -55,6 +55,34 @@ #define DW_UART_QUIRK_SKIP_SET_RATE BIT(2) #define DW_UART_QUIRK_IS_DMA_FC BIT(3) #define DW_UART_QUIRK_APMC0D08 BIT(4) +#define DW_UART_QUIRK_CPR_VALUE BIT(5) + +struct dw8250_platform_data { + u8 usr_reg; + u32 cpr_value; + unsigned int quirks; +}; + +struct dw8250_data { + struct dw8250_port_data data; + const struct dw8250_platform_data *pdata; + + int msr_mask_on; + int msr_mask_off; + struct clk *clk; + struct clk *pclk; + struct notifier_block clk_notifier; + struct work_struct clk_work; + struct reset_control *rst; + + unsigned int skip_autocfg:1; + unsigned int uart_16550_compatible:1; +}; + +static inline struct dw8250_data *to_dw8250_data(struct dw8250_port_data *data) +{ + return container_of(data, struct dw8250_data, data); +} static inline struct dw8250_data *clk_to_dw8250_data(struct notifier_block *nb) { @@ -445,6 +473,10 @@ static void dw8250_prepare_rx_dma(struct uart_8250_port *p) static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data) { unsigned int quirks = data->pdata ? data->pdata->quirks : 0; + u32 cpr_value = data->pdata ? data->pdata->cpr_value : 0; + + if (quirks & DW_UART_QUIRK_CPR_VALUE) + data->data.cpr_value = cpr_value; #ifdef CONFIG_64BIT if (quirks & DW_UART_QUIRK_OCTEON) { @@ -727,8 +759,8 @@ static const struct dw8250_platform_data dw8250_armada_38x_data = { static const struct dw8250_platform_data dw8250_renesas_rzn1_data = { .usr_reg = DW_UART_USR, - .cpr_val = 0x00012f32, - .quirks = DW_UART_QUIRK_IS_DMA_FC, + .cpr_value = 0x00012f32, + .quirks = DW_UART_QUIRK_CPR_VALUE | DW_UART_QUIRK_IS_DMA_FC, }; static const struct dw8250_platform_data dw8250_starfive_jh7100_data = { diff --git a/drivers/tty/serial/8250/8250_dwlib.c b/drivers/tty/serial/8250/8250_dwlib.c index 3e33ddf7bc..5a2520943d 100644 --- a/drivers/tty/serial/8250/8250_dwlib.c +++ b/drivers/tty/serial/8250/8250_dwlib.c @@ -242,7 +242,6 @@ static const struct serial_rs485 dw8250_rs485_supported = { void dw8250_setup_port(struct uart_port *p) { struct dw8250_port_data *pd = p->private_data; - struct dw8250_data *data = to_dw8250_data(pd); struct uart_8250_port *up = up_to_u8250p(p); u32 reg, old_dlf; @@ -278,7 +277,7 @@ void dw8250_setup_port(struct uart_port *p) reg = dw8250_readl_ext(p, DW_UART_CPR); if (!reg) { - reg = data->pdata->cpr_val; + reg = pd->cpr_value; dev_dbg(p->dev, "CPR is not available, using 0x%08x instead\n", reg); } if (!reg) diff --git a/drivers/tty/serial/8250/8250_dwlib.h b/drivers/tty/serial/8250/8250_dwlib.h index f13e91f2ca..7dd2a8e7b7 100644 --- a/drivers/tty/serial/8250/8250_dwlib.h +++ b/drivers/tty/serial/8250/8250_dwlib.h @@ -2,15 +2,10 @@ /* Synopsys DesignWare 8250 library header file. */ #include -#include #include -#include #include "8250.h" -struct clk; -struct reset_control; - struct dw8250_port_data { /* Port properties */ int line; @@ -19,42 +14,16 @@ struct dw8250_port_data { struct uart_8250_dma dma; /* Hardware configuration */ + u32 cpr_value; u8 dlf_size; /* RS485 variables */ bool hw_rs485_support; }; -struct dw8250_platform_data { - u8 usr_reg; - u32 cpr_val; - unsigned int quirks; -}; - -struct dw8250_data { - struct dw8250_port_data data; - const struct dw8250_platform_data *pdata; - - int msr_mask_on; - int msr_mask_off; - struct clk *clk; - struct clk *pclk; - struct notifier_block clk_notifier; - struct work_struct clk_work; - struct reset_control *rst; - - unsigned int skip_autocfg:1; - unsigned int uart_16550_compatible:1; -}; - void dw8250_do_set_termios(struct uart_port *p, struct ktermios *termios, const struct ktermios *old); void dw8250_setup_port(struct uart_port *p); -static inline struct dw8250_data *to_dw8250_data(struct dw8250_port_data *data) -{ - return container_of(data, struct dw8250_data, data); -} - static inline u32 dw8250_readl_ext(struct uart_port *p, int offset) { if (p->iotype == UPIO_MEM32BE) diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c index 0440df7de1..4d1e07343d 100644 --- a/drivers/tty/serial/8250/8250_exar.c +++ b/drivers/tty/serial/8250/8250_exar.c @@ -46,8 +46,50 @@ #define PCI_DEVICE_ID_COMMTECH_4228PCIE 0x0021 #define PCI_DEVICE_ID_COMMTECH_4222PCIE 0x0022 +#define PCI_VENDOR_ID_CONNECT_TECH 0x12c4 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_SP_OPTO 0x0340 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_SP_OPTO_A 0x0341 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_SP_OPTO_B 0x0342 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_XPRS 0x0350 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_XPRS_A 0x0351 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_XPRS_B 0x0352 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_XPRS 0x0353 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_16_XPRS_A 0x0354 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_16_XPRS_B 0x0355 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_XPRS_OPTO 0x0360 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_XPRS_OPTO_A 0x0361 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_XPRS_OPTO_B 0x0362 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_SP 0x0370 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_SP_232 0x0371 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_SP_485 0x0372 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_4_SP 0x0373 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_6_2_SP 0x0374 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_6_SP 0x0375 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_SP_232_NS 0x0376 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_XP_OPTO_LEFT 0x0380 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_XP_OPTO_RIGHT 0x0381 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_XP_OPTO 0x0382 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_4_XPRS_OPTO 0x0392 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_XPRS_LP 0x03A0 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_XPRS_LP_232 0x03A1 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_XPRS_LP_485 0x03A2 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_XPRS_LP_232_NS 0x03A3 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCIE_XEG001 0x0602 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCIE_XR35X_BASE 0x1000 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCIE_XR35X_2 0x1002 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCIE_XR35X_4 0x1004 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCIE_XR35X_8 0x1008 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCIE_XR35X_12 0x100C +#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCIE_XR35X_16 0x1010 +#define PCI_DEVICE_ID_CONNECT_TECH_PCI_XR79X_12_XIG00X 0x110c +#define PCI_DEVICE_ID_CONNECT_TECH_PCI_XR79X_12_XIG01X 0x110d +#define PCI_DEVICE_ID_CONNECT_TECH_PCI_XR79X_16 0x1110 + #define PCI_DEVICE_ID_EXAR_XR17V4358 0x4358 #define PCI_DEVICE_ID_EXAR_XR17V8358 0x8358 +#define PCI_DEVICE_ID_EXAR_XR17V252 0x0252 +#define PCI_DEVICE_ID_EXAR_XR17V254 0x0254 +#define PCI_DEVICE_ID_EXAR_XR17V258 0x0258 #define PCI_SUBDEVICE_ID_USR_2980 0x0128 #define PCI_SUBDEVICE_ID_USR_2981 0x0129 diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c index 9ff6bbe9c0..d14988d149 100644 --- a/drivers/tty/serial/8250/8250_mtk.c +++ b/drivers/tty/serial/8250/8250_mtk.c @@ -209,15 +209,19 @@ static int mtk8250_startup(struct uart_port *port) static void mtk8250_shutdown(struct uart_port *port) { -#ifdef CONFIG_SERIAL_8250_DMA struct uart_8250_port *up = up_to_u8250p(port); struct mtk8250_data *data = port->private_data; + int irq = data->rx_wakeup_irq; +#ifdef CONFIG_SERIAL_8250_DMA if (up->dma) data->rx_status = DMA_RX_SHUTDOWN; #endif - return serial8250_do_shutdown(port); + serial8250_do_shutdown(port); + + if (irq >= 0) + serial8250_do_set_mctrl(&up->port, TIOCM_RTS); } static void mtk8250_disable_intrs(struct uart_8250_port *up, int mask) diff --git a/drivers/tty/serial/8250/8250_pxa.c b/drivers/tty/serial/8250/8250_pxa.c index f1a51b00b1..ba96fa913e 100644 --- a/drivers/tty/serial/8250/8250_pxa.c +++ b/drivers/tty/serial/8250/8250_pxa.c @@ -125,6 +125,7 @@ static int serial_pxa_probe(struct platform_device *pdev) uart.port.iotype = UPIO_MEM32; uart.port.regshift = 2; uart.port.fifosize = 64; + uart.tx_loadsz = 32; uart.dl_write = serial_pxa_dl_write; ret = serial8250_register_8250_port(&uart); -- cgit v1.2.3