From 8665bd53f2f2e27e5511d90428cb3f60e6d0ce15 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 18 May 2024 20:50:12 +0200 Subject: Merging upstream version 6.8.9. Signed-off-by: Daniel Baumann --- drivers/tty/serial/8250/8250_aspeed_vuart.c | 6 +- drivers/tty/serial/8250/8250_bcm2835aux.c | 6 +- drivers/tty/serial/8250/8250_bcm7271.c | 5 +- drivers/tty/serial/8250/8250_core.c | 5 +- drivers/tty/serial/8250/8250_dw.c | 6 +- drivers/tty/serial/8250/8250_dwlib.c | 16 +- drivers/tty/serial/8250/8250_em.c | 5 +- drivers/tty/serial/8250/8250_fsl.c | 8 +- drivers/tty/serial/8250/8250_ingenic.c | 5 +- drivers/tty/serial/8250/8250_ioc3.c | 5 +- drivers/tty/serial/8250/8250_lpc18xx.c | 6 +- drivers/tty/serial/8250/8250_lpss.c | 7 +- drivers/tty/serial/8250/8250_mtk.c | 6 +- drivers/tty/serial/8250/8250_of.c | 49 ++++- drivers/tty/serial/8250/8250_omap.c | 5 +- drivers/tty/serial/8250/8250_pci.c | 7 +- drivers/tty/serial/8250/8250_pci1xxxx.c | 210 +++++++++++++++++++-- drivers/tty/serial/8250/8250_port.c | 24 --- drivers/tty/serial/8250/8250_pxa.c | 6 +- drivers/tty/serial/8250/8250_tegra.c | 6 +- drivers/tty/serial/8250/8250_uniphier.c | 6 +- drivers/tty/serial/8250/serial_cs.c | 6 - drivers/tty/serial/Kconfig | 5 +- drivers/tty/serial/altera_jtaguart.c | 6 +- drivers/tty/serial/altera_uart.c | 8 +- drivers/tty/serial/amba-pl011.c | 272 ++++++++++++++-------------- drivers/tty/serial/ar933x_uart.c | 6 +- drivers/tty/serial/atmel_serial.c | 22 ++- drivers/tty/serial/bcm63xx_uart.c | 5 +- drivers/tty/serial/clps711x.c | 6 +- drivers/tty/serial/cpm_uart.c | 6 +- drivers/tty/serial/digicolor-usart.c | 6 +- drivers/tty/serial/earlycon-riscv-sbi.c | 27 ++- drivers/tty/serial/esp32_acm.c | 7 +- drivers/tty/serial/esp32_uart.c | 16 +- drivers/tty/serial/fsl_linflexuart.c | 6 +- drivers/tty/serial/fsl_lpuart.c | 5 +- drivers/tty/serial/imx.c | 23 ++- drivers/tty/serial/jsm/jsm.h | 5 - drivers/tty/serial/jsm/jsm_cls.c | 36 ---- drivers/tty/serial/jsm/jsm_neo.c | 40 ---- drivers/tty/serial/lantiq.c | 6 +- drivers/tty/serial/liteuart.c | 6 +- drivers/tty/serial/lpc32xx_hs.c | 6 +- drivers/tty/serial/ma35d1_serial.c | 7 +- drivers/tty/serial/max310x.c | 2 +- drivers/tty/serial/mcf.c | 6 +- drivers/tty/serial/meson_uart.c | 8 +- drivers/tty/serial/milbeaut_usio.c | 6 +- drivers/tty/serial/mpc52xx_uart.c | 7 +- drivers/tty/serial/msm_serial.c | 25 ++- drivers/tty/serial/mxs-auart.c | 28 ++- drivers/tty/serial/omap-serial.c | 6 +- drivers/tty/serial/owl-uart.c | 6 +- drivers/tty/serial/pic32_uart.c | 7 +- drivers/tty/serial/pmac_zilog.c | 14 -- drivers/tty/serial/qcom_geni_serial.c | 6 +- drivers/tty/serial/rda-uart.c | 6 +- drivers/tty/serial/rp2.c | 1 - drivers/tty/serial/sa1100.c | 6 +- drivers/tty/serial/samsung_tty.c | 22 ++- drivers/tty/serial/sc16is7xx.c | 252 ++++++++++++-------------- drivers/tty/serial/sccnxp.c | 13 +- drivers/tty/serial/serial-tegra.c | 5 +- drivers/tty/serial/serial_base.h | 4 + drivers/tty/serial/serial_core.c | 48 +++-- drivers/tty/serial/serial_port.c | 34 ++++ drivers/tty/serial/serial_txx9.c | 5 +- drivers/tty/serial/sh-sci.c | 13 +- drivers/tty/serial/sifive.c | 10 +- drivers/tty/serial/sprd_serial.c | 6 +- drivers/tty/serial/st-asc.c | 6 +- drivers/tty/serial/stm32-usart.c | 19 +- drivers/tty/serial/sunhv.c | 6 +- drivers/tty/serial/sunplus-uart.c | 6 +- drivers/tty/serial/sunsab.c | 22 +-- drivers/tty/serial/sunsu.c | 6 +- drivers/tty/serial/sunzilog.c | 6 +- drivers/tty/serial/tegra-tcu.c | 6 +- drivers/tty/serial/timbuart.c | 6 +- drivers/tty/serial/uartlite.c | 20 +- drivers/tty/serial/ucc_uart.c | 34 ++-- drivers/tty/serial/xilinx_uartps.c | 7 +- 83 files changed, 872 insertions(+), 755 deletions(-) (limited to 'drivers/tty/serial') diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c b/drivers/tty/serial/8250/8250_aspeed_vuart.c index d7482ae33a..8c2aaf7af7 100644 --- a/drivers/tty/serial/8250/8250_aspeed_vuart.c +++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c @@ -566,7 +566,7 @@ err_sysfs_remove: return rc; } -static int aspeed_vuart_remove(struct platform_device *pdev) +static void aspeed_vuart_remove(struct platform_device *pdev) { struct aspeed_vuart *vuart = platform_get_drvdata(pdev); @@ -574,8 +574,6 @@ static int aspeed_vuart_remove(struct platform_device *pdev) aspeed_vuart_set_enabled(vuart, false); serial8250_unregister_port(vuart->line); sysfs_remove_group(&vuart->dev->kobj, &aspeed_vuart_attr_group); - - return 0; } static const struct of_device_id aspeed_vuart_table[] = { @@ -590,7 +588,7 @@ static struct platform_driver aspeed_vuart_driver = { .of_match_table = aspeed_vuart_table, }, .probe = aspeed_vuart_probe, - .remove = aspeed_vuart_remove, + .remove_new = aspeed_vuart_remove, }; module_platform_driver(aspeed_vuart_driver); diff --git a/drivers/tty/serial/8250/8250_bcm2835aux.c b/drivers/tty/serial/8250/8250_bcm2835aux.c index 4f4502fb54..beac6b340a 100644 --- a/drivers/tty/serial/8250/8250_bcm2835aux.c +++ b/drivers/tty/serial/8250/8250_bcm2835aux.c @@ -197,14 +197,12 @@ dis_clk: return ret; } -static int bcm2835aux_serial_remove(struct platform_device *pdev) +static void bcm2835aux_serial_remove(struct platform_device *pdev) { struct bcm2835aux_data *data = platform_get_drvdata(pdev); serial8250_unregister_port(data->line); clk_disable_unprepare(data->clk); - - return 0; } static const struct bcm2835_aux_serial_driver_data bcm2835_acpi_data = { @@ -230,7 +228,7 @@ static struct platform_driver bcm2835aux_serial_driver = { .acpi_match_table = bcm2835aux_serial_acpi_match, }, .probe = bcm2835aux_serial_probe, - .remove = bcm2835aux_serial_remove, + .remove_new = bcm2835aux_serial_remove, }; module_platform_driver(bcm2835aux_serial_driver); diff --git a/drivers/tty/serial/8250/8250_bcm7271.c b/drivers/tty/serial/8250/8250_bcm7271.c index 55dea2539c..504c4c0208 100644 --- a/drivers/tty/serial/8250/8250_bcm7271.c +++ b/drivers/tty/serial/8250/8250_bcm7271.c @@ -1121,7 +1121,7 @@ release_dma: return ret; } -static int brcmuart_remove(struct platform_device *pdev) +static void brcmuart_remove(struct platform_device *pdev) { struct brcmuart_priv *priv = platform_get_drvdata(pdev); @@ -1131,7 +1131,6 @@ static int brcmuart_remove(struct platform_device *pdev) brcmuart_free_bufs(&pdev->dev, priv); if (priv->dma_enabled) brcmuart_arbitration(priv, 0); - return 0; } static int __maybe_unused brcmuart_suspend(struct device *dev) @@ -1207,7 +1206,7 @@ static struct platform_driver brcmuart_platform_driver = { .of_match_table = brcmuart_dt_ids, }, .probe = brcmuart_probe, - .remove = brcmuart_remove, + .remove_new = brcmuart_remove, }; static int __init brcmuart_init(void) diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index 9127331518..b62ad90067 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -883,7 +883,7 @@ static int serial8250_probe(struct platform_device *dev) /* * Remove serial ports registered against a platform device. */ -static int serial8250_remove(struct platform_device *dev) +static void serial8250_remove(struct platform_device *dev) { int i; @@ -893,7 +893,6 @@ static int serial8250_remove(struct platform_device *dev) if (up->port.dev == &dev->dev) serial8250_unregister_port(i); } - return 0; } static int serial8250_suspend(struct platform_device *dev, pm_message_t state) @@ -926,7 +925,7 @@ static int serial8250_resume(struct platform_device *dev) static struct platform_driver serial8250_isa_driver = { .probe = serial8250_probe, - .remove = serial8250_remove, + .remove_new = serial8250_remove, .suspend = serial8250_suspend, .resume = serial8250_resume, .driver = { diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index e6218766d0..2d1f350a4b 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -663,7 +663,7 @@ static int dw8250_probe(struct platform_device *pdev) return 0; } -static int dw8250_remove(struct platform_device *pdev) +static void dw8250_remove(struct platform_device *pdev) { struct dw8250_data *data = platform_get_drvdata(pdev); struct device *dev = &pdev->dev; @@ -680,8 +680,6 @@ static int dw8250_remove(struct platform_device *pdev) pm_runtime_disable(dev); pm_runtime_put_noidle(dev); - - return 0; } static int dw8250_suspend(struct device *dev) @@ -790,7 +788,7 @@ static struct platform_driver dw8250_platform_driver = { .acpi_match_table = dw8250_acpi_match, }, .probe = dw8250_probe, - .remove = dw8250_remove, + .remove_new = dw8250_remove, }; module_platform_driver(dw8250_platform_driver); diff --git a/drivers/tty/serial/8250/8250_dwlib.c b/drivers/tty/serial/8250/8250_dwlib.c index 84843e204a..3e33ddf7bc 100644 --- a/drivers/tty/serial/8250/8250_dwlib.c +++ b/drivers/tty/serial/8250/8250_dwlib.c @@ -259,17 +259,6 @@ void dw8250_setup_port(struct uart_port *p) } up->capabilities |= UART_CAP_NOTEMT; - /* - * If the Component Version Register returns zero, we know that - * ADDITIONAL_FEATURES are not enabled. No need to go any further. - */ - reg = dw8250_readl_ext(p, DW_UART_UCV); - if (!reg) - return; - - dev_dbg(p->dev, "Designware UART version %c.%c%c\n", - (reg >> 24) & 0xff, (reg >> 16) & 0xff, (reg >> 8) & 0xff); - /* Preserve value written by firmware or bootloader */ old_dlf = dw8250_readl_ext(p, DW_UART_DLF); dw8250_writel_ext(p, DW_UART_DLF, ~0U); @@ -282,6 +271,11 @@ void dw8250_setup_port(struct uart_port *p) p->set_divisor = dw8250_set_divisor; } + reg = dw8250_readl_ext(p, DW_UART_UCV); + if (reg) + dev_dbg(p->dev, "Designware UART version %c.%c%c\n", + (reg >> 24) & 0xff, (reg >> 16) & 0xff, (reg >> 8) & 0xff); + reg = dw8250_readl_ext(p, DW_UART_CPR); if (!reg) { reg = data->pdata->cpr_val; diff --git a/drivers/tty/serial/8250/8250_em.c b/drivers/tty/serial/8250/8250_em.c index ef5019e944..a754755100 100644 --- a/drivers/tty/serial/8250/8250_em.c +++ b/drivers/tty/serial/8250/8250_em.c @@ -200,12 +200,11 @@ static int serial8250_em_probe(struct platform_device *pdev) return 0; } -static int serial8250_em_remove(struct platform_device *pdev) +static void serial8250_em_remove(struct platform_device *pdev) { struct serial8250_em_priv *priv = platform_get_drvdata(pdev); serial8250_unregister_port(priv->line); - return 0; } static const struct of_device_id serial8250_em_dt_ids[] = { @@ -220,7 +219,7 @@ static struct platform_driver serial8250_em_platform_driver = { .of_match_table = serial8250_em_dt_ids, }, .probe = serial8250_em_probe, - .remove = serial8250_em_remove, + .remove_new = serial8250_em_remove, }; module_platform_driver(serial8250_em_platform_driver); diff --git a/drivers/tty/serial/8250/8250_fsl.c b/drivers/tty/serial/8250/8250_fsl.c index f522eb5026..b4ed442082 100644 --- a/drivers/tty/serial/8250/8250_fsl.c +++ b/drivers/tty/serial/8250/8250_fsl.c @@ -51,7 +51,8 @@ int fsl8250_handle_irq(struct uart_port *port) * immediately and interrupt the CPU again. The hardware clears LSR.BI * when the next valid char is read.) */ - if (unlikely(up->lsr_saved_flags & UART_LSR_BI)) { + if (unlikely((iir & UART_IIR_ID) == UART_IIR_RLSI && + (up->lsr_saved_flags & UART_LSR_BI))) { up->lsr_saved_flags &= ~UART_LSR_BI; port->serial_in(port, UART_RX); uart_port_unlock_irqrestore(&up->port, flags); @@ -159,12 +160,11 @@ static int fsl8250_acpi_probe(struct platform_device *pdev) return 0; } -static int fsl8250_acpi_remove(struct platform_device *pdev) +static void fsl8250_acpi_remove(struct platform_device *pdev) { struct fsl8250_data *data = platform_get_drvdata(pdev); serial8250_unregister_port(data->line); - return 0; } static const struct acpi_device_id fsl_8250_acpi_id[] = { @@ -179,7 +179,7 @@ static struct platform_driver fsl8250_platform_driver = { .acpi_match_table = ACPI_PTR(fsl_8250_acpi_id), }, .probe = fsl8250_acpi_probe, - .remove = fsl8250_acpi_remove, + .remove_new = fsl8250_acpi_remove, }; module_platform_driver(fsl8250_platform_driver); diff --git a/drivers/tty/serial/8250/8250_ingenic.c b/drivers/tty/serial/8250/8250_ingenic.c index 4c4c4da73a..a12f737924 100644 --- a/drivers/tty/serial/8250/8250_ingenic.c +++ b/drivers/tty/serial/8250/8250_ingenic.c @@ -320,14 +320,13 @@ out: return err; } -static int ingenic_uart_remove(struct platform_device *pdev) +static void ingenic_uart_remove(struct platform_device *pdev) { struct ingenic_uart_data *data = platform_get_drvdata(pdev); serial8250_unregister_port(data->line); clk_disable_unprepare(data->clk_module); clk_disable_unprepare(data->clk_baud); - return 0; } static const struct ingenic_uart_config jz4740_uart_config = { @@ -368,7 +367,7 @@ static struct platform_driver ingenic_uart_platform_driver = { .of_match_table = of_match, }, .probe = ingenic_uart_probe, - .remove = ingenic_uart_remove, + .remove_new = ingenic_uart_remove, }; module_platform_driver(ingenic_uart_platform_driver); diff --git a/drivers/tty/serial/8250/8250_ioc3.c b/drivers/tty/serial/8250/8250_ioc3.c index d5a39e105a..50c77c3dac 100644 --- a/drivers/tty/serial/8250/8250_ioc3.c +++ b/drivers/tty/serial/8250/8250_ioc3.c @@ -75,17 +75,16 @@ static int serial8250_ioc3_probe(struct platform_device *pdev) return 0; } -static int serial8250_ioc3_remove(struct platform_device *pdev) +static void serial8250_ioc3_remove(struct platform_device *pdev) { struct ioc3_8250_data *data = platform_get_drvdata(pdev); serial8250_unregister_port(data->line); - return 0; } static struct platform_driver serial8250_ioc3_driver = { .probe = serial8250_ioc3_probe, - .remove = serial8250_ioc3_remove, + .remove_new = serial8250_ioc3_remove, .driver = { .name = "ioc3-serial8250", } diff --git a/drivers/tty/serial/8250/8250_lpc18xx.c b/drivers/tty/serial/8250/8250_lpc18xx.c index 6dc85aaba5..8d728a6a59 100644 --- a/drivers/tty/serial/8250/8250_lpc18xx.c +++ b/drivers/tty/serial/8250/8250_lpc18xx.c @@ -182,15 +182,13 @@ dis_clk_reg: return ret; } -static int lpc18xx_serial_remove(struct platform_device *pdev) +static void lpc18xx_serial_remove(struct platform_device *pdev) { struct lpc18xx_uart_data *data = platform_get_drvdata(pdev); serial8250_unregister_port(data->line); clk_disable_unprepare(data->clk_uart); clk_disable_unprepare(data->clk_reg); - - return 0; } static const struct of_device_id lpc18xx_serial_match[] = { @@ -201,7 +199,7 @@ MODULE_DEVICE_TABLE(of, lpc18xx_serial_match); static struct platform_driver lpc18xx_serial_driver = { .probe = lpc18xx_serial_probe, - .remove = lpc18xx_serial_remove, + .remove_new = lpc18xx_serial_remove, .driver = { .name = "lpc18xx-uart", .of_match_table = lpc18xx_serial_match, diff --git a/drivers/tty/serial/8250/8250_lpss.c b/drivers/tty/serial/8250/8250_lpss.c index 0e43bdfb74..776ec1ef29 100644 --- a/drivers/tty/serial/8250/8250_lpss.c +++ b/drivers/tty/serial/8250/8250_lpss.c @@ -287,17 +287,14 @@ static int lpss8250_dma_setup(struct lpss8250 *lpss, struct uart_8250_port *port return 0; } - rx_param = devm_kzalloc(dev, sizeof(*rx_param), GFP_KERNEL); + rx_param = devm_kmemdup(dev, &lpss->dma_param, sizeof(*rx_param), GFP_KERNEL); if (!rx_param) return -ENOMEM; - tx_param = devm_kzalloc(dev, sizeof(*tx_param), GFP_KERNEL); + tx_param = devm_kmemdup(dev, &lpss->dma_param, sizeof(*tx_param), GFP_KERNEL); if (!tx_param) return -ENOMEM; - *rx_param = lpss->dma_param; - *tx_param = lpss->dma_param; - dma->fn = lpss8250_dma_filter; dma->rx_param = rx_param; dma->tx_param = tx_param; diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c index 23457daae8..9ff6bbe9c0 100644 --- a/drivers/tty/serial/8250/8250_mtk.c +++ b/drivers/tty/serial/8250/8250_mtk.c @@ -581,7 +581,7 @@ static int mtk8250_probe(struct platform_device *pdev) return 0; } -static int mtk8250_remove(struct platform_device *pdev) +static void mtk8250_remove(struct platform_device *pdev) { struct mtk8250_data *data = platform_get_drvdata(pdev); @@ -591,8 +591,6 @@ static int mtk8250_remove(struct platform_device *pdev) pm_runtime_disable(&pdev->dev); pm_runtime_put_noidle(&pdev->dev); - - return 0; } static int __maybe_unused mtk8250_suspend(struct device *dev) @@ -652,7 +650,7 @@ static struct platform_driver mtk8250_platform_driver = { .of_match_table = mtk8250_of_match, }, .probe = mtk8250_probe, - .remove = mtk8250_remove, + .remove_new = mtk8250_remove, }; module_platform_driver(mtk8250_platform_driver); diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c index ef3e745bd0..9dcc17e332 100644 --- a/drivers/tty/serial/8250/8250_of.c +++ b/drivers/tty/serial/8250/8250_of.c @@ -4,7 +4,10 @@ * * Copyright (C) 2006 Arnd Bergmann , IBM Corp. */ + +#include #include +#include #include #include #include @@ -25,6 +28,36 @@ struct of_serial_info { int line; }; +/* Nuvoton NPCM timeout register */ +#define UART_NPCM_TOR 7 +#define UART_NPCM_TOIE BIT(7) /* Timeout Interrupt Enable */ + +static int npcm_startup(struct uart_port *port) +{ + /* + * Nuvoton calls the scratch register 'UART_TOR' (timeout + * register). Enable it, and set TIOC (timeout interrupt + * comparator) to be 0x20 for correct operation. + */ + serial_port_out(port, UART_NPCM_TOR, UART_NPCM_TOIE | 0x20); + + return serial8250_do_startup(port); +} + +/* Nuvoton NPCM UARTs have a custom divisor calculation */ +static unsigned int npcm_get_divisor(struct uart_port *port, unsigned int baud, + unsigned int *frac) +{ + return DIV_ROUND_CLOSEST(port->uartclk, 16 * baud + 2) - 2; +} + +static int npcm_setup(struct uart_port *port) +{ + port->get_divisor = npcm_get_divisor; + port->startup = npcm_startup; + return 0; +} + /* * Fill a struct uart_port for a given device node */ @@ -164,10 +197,17 @@ static int of_platform_serial_setup(struct platform_device *ofdev, switch (type) { case PORT_RT2880: ret = rt288x_setup(port); - if (ret) - goto err_pmruntime; + break; + case PORT_NPCM: + ret = npcm_setup(port); + break; + default: + /* Nothing to do */ + ret = 0; break; } + if (ret) + goto err_pmruntime; if (IS_REACHABLE(CONFIG_SERIAL_8250_FSL) && (of_device_is_compatible(np, "fsl,ns16550") || @@ -251,7 +291,7 @@ err_free: /* * Release a line */ -static int of_platform_serial_remove(struct platform_device *ofdev) +static void of_platform_serial_remove(struct platform_device *ofdev) { struct of_serial_info *info = platform_get_drvdata(ofdev); @@ -261,7 +301,6 @@ static int of_platform_serial_remove(struct platform_device *ofdev) pm_runtime_put_sync(&ofdev->dev); pm_runtime_disable(&ofdev->dev); kfree(info); - return 0; } #ifdef CONFIG_PM_SLEEP @@ -337,7 +376,7 @@ static struct platform_driver of_platform_serial_driver = { .pm = &of_serial_pm_ops, }, .probe = of_platform_serial_probe, - .remove = of_platform_serial_remove, + .remove_new = of_platform_serial_remove, }; module_platform_driver(of_platform_serial_driver); diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index dd2be7a813..6942990a33 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -1586,7 +1586,7 @@ err: return ret; } -static int omap8250_remove(struct platform_device *pdev) +static void omap8250_remove(struct platform_device *pdev) { struct omap8250_priv *priv = platform_get_drvdata(pdev); struct uart_8250_port *up; @@ -1606,7 +1606,6 @@ static int omap8250_remove(struct platform_device *pdev) pm_runtime_disable(&pdev->dev); cpu_latency_qos_remove_request(&priv->pm_qos_request); device_init_wakeup(&pdev->dev, false); - return 0; } static int omap8250_prepare(struct device *dev) @@ -1865,7 +1864,7 @@ static struct platform_driver omap8250_platform_driver = { .of_match_table = omap8250_dt_ids, }, .probe = omap8250_probe, - .remove = omap8250_remove, + .remove_new = omap8250_remove, }; module_platform_driver(omap8250_platform_driver); diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 8ccf691935..0d35c77fad 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -2039,12 +2039,13 @@ static int pci_moxa_init(struct pci_dev *dev) unsigned short device = dev->device; resource_size_t iobar_addr = pci_resource_start(dev, 2); unsigned int num_ports = (device & 0x00F0) >> 4, i; - u8 val; + u8 val, init_mode = MOXA_RS232; if (!(pci_moxa_supported_rs(dev) & MOXA_SUPP_RS232)) { - for (i = 0; i < num_ports; ++i) - pci_moxa_set_interface(dev, i, MOXA_RS422); + init_mode = MOXA_RS422; } + for (i = 0; i < num_ports; ++i) + pci_moxa_set_interface(dev, i, init_mode); /* * Enable hardware buffer to prevent break signal output when system boots up. diff --git a/drivers/tty/serial/8250/8250_pci1xxxx.c b/drivers/tty/serial/8250/8250_pci1xxxx.c index 9f9e219819..2dda737b16 100644 --- a/drivers/tty/serial/8250/8250_pci1xxxx.c +++ b/drivers/tty/serial/8250/8250_pci1xxxx.c @@ -9,15 +9,21 @@ #include #include +#include #include +#include #include #include #include #include +#include +#include #include #include #include #include +#include +#include #include @@ -52,6 +58,17 @@ #define PCI_SUBDEVICE_ID_EFAR_PCI11400 PCI_DEVICE_ID_EFAR_PCI11400 #define PCI_SUBDEVICE_ID_EFAR_PCI11414 PCI_DEVICE_ID_EFAR_PCI11414 +#define UART_SYSTEM_ADDR_BASE 0x1000 +#define UART_DEV_REV_REG (UART_SYSTEM_ADDR_BASE + 0x00) +#define UART_DEV_REV_MASK GENMASK(7, 0) +#define UART_SYSLOCK_REG (UART_SYSTEM_ADDR_BASE + 0xA0) +#define UART_SYSLOCK BIT(2) +#define SYSLOCK_SLEEP_TIMEOUT 100 +#define SYSLOCK_RETRY_CNT 1000 + +#define UART_RX_BYTE_FIFO 0x00 +#define UART_FIFO_CTL 0x02 + #define UART_ACTV_REG 0x11 #define UART_BLOCK_SET_ACTIVE BIT(0) @@ -82,8 +99,59 @@ #define UART_RESET_REG 0x94 #define UART_RESET_D3_RESET_DISABLE BIT(16) +#define UART_BURST_STATUS_REG 0x9C +#define UART_RX_BURST_FIFO 0xA4 + #define MAX_PORTS 4 #define PORT_OFFSET 0x100 +#define RX_BUF_SIZE 512 +#define UART_BYTE_SIZE 1 +#define UART_BURST_SIZE 4 + +#define UART_BST_STAT_RX_COUNT_MASK 0x00FF +#define UART_BST_STAT_IIR_INT_PEND 0x100000 +#define UART_LSR_OVERRUN_ERR_CLR 0x43 +#define UART_BST_STAT_LSR_RX_MASK 0x9F000000 +#define UART_BST_STAT_LSR_RX_ERR_MASK 0x9E000000 +#define UART_BST_STAT_LSR_OVERRUN_ERR 0x2000000 +#define UART_BST_STAT_LSR_PARITY_ERR 0x4000000 +#define UART_BST_STAT_LSR_FRAME_ERR 0x8000000 + +struct pci1xxxx_8250 { + unsigned int nr; + u8 dev_rev; + u8 pad[3]; + void __iomem *membase; + int line[] __counted_by(nr); +}; + +static const struct serial_rs485 pci1xxxx_rs485_supported = { + .flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | + SER_RS485_RTS_AFTER_SEND, + .delay_rts_after_send = 1, + /* Delay RTS before send is not supported */ +}; + +static int pci1xxxx_set_sys_lock(struct pci1xxxx_8250 *port) +{ + writel(UART_SYSLOCK, port->membase + UART_SYSLOCK_REG); + return readl(port->membase + UART_SYSLOCK_REG); +} + +static int pci1xxxx_acquire_sys_lock(struct pci1xxxx_8250 *port) +{ + u32 regval; + + return readx_poll_timeout(pci1xxxx_set_sys_lock, port, regval, + (regval & UART_SYSLOCK), + SYSLOCK_SLEEP_TIMEOUT, + SYSLOCK_RETRY_CNT * SYSLOCK_SLEEP_TIMEOUT); +} + +static void pci1xxxx_release_sys_lock(struct pci1xxxx_8250 *port) +{ + writel(0x0, port->membase + UART_SYSLOCK_REG); +} static const int logical_to_physical_port_idx[][MAX_PORTS] = { {0, 1, 2, 3}, /* PCI12000, PCI11010, PCI11101, PCI11400, PCI11414 */ @@ -104,12 +172,6 @@ static const int logical_to_physical_port_idx[][MAX_PORTS] = { {3, -1, -1, -1}, /* PCI1p3 */ }; -struct pci1xxxx_8250 { - unsigned int nr; - void __iomem *membase; - int line[] __counted_by(nr); -}; - static int pci1xxxx_get_num_ports(struct pci_dev *dev) { switch (dev->subsystem_device) { @@ -205,12 +267,102 @@ static int pci1xxxx_rs485_config(struct uart_port *port, return 0; } -static const struct serial_rs485 pci1xxxx_rs485_supported = { - .flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | - SER_RS485_RTS_AFTER_SEND, - .delay_rts_after_send = 1, - /* Delay RTS before send is not supported */ -}; +static u32 pci1xxxx_read_burst_status(struct uart_port *port) +{ + u32 status; + + status = readl(port->membase + UART_BURST_STATUS_REG); + if (status & UART_BST_STAT_LSR_RX_ERR_MASK) { + if (status & UART_BST_STAT_LSR_OVERRUN_ERR) { + writeb(UART_LSR_OVERRUN_ERR_CLR, + port->membase + UART_FIFO_CTL); + port->icount.overrun++; + } + + if (status & UART_BST_STAT_LSR_FRAME_ERR) + port->icount.frame++; + + if (status & UART_BST_STAT_LSR_PARITY_ERR) + port->icount.parity++; + } + return status; +} + +static void pci1xxxx_process_read_data(struct uart_port *port, + unsigned char *rx_buff, u32 *buff_index, + u32 *valid_byte_count) +{ + u32 valid_burst_count = *valid_byte_count / UART_BURST_SIZE; + u32 *burst_buf; + + /* + * Depending on the RX Trigger Level the number of bytes that can be + * stored in RX FIFO at a time varies. Each transaction reads data + * in DWORDs. If there are less than four remaining valid_byte_count + * to read, the data is received one byte at a time. + */ + while (valid_burst_count--) { + if (*buff_index > (RX_BUF_SIZE - UART_BURST_SIZE)) + break; + burst_buf = (u32 *)&rx_buff[*buff_index]; + *burst_buf = readl(port->membase + UART_RX_BURST_FIFO); + *buff_index += UART_BURST_SIZE; + *valid_byte_count -= UART_BURST_SIZE; + } + + while (*valid_byte_count) { + if (*buff_index >= RX_BUF_SIZE) + break; + rx_buff[*buff_index] = readb(port->membase + + UART_RX_BYTE_FIFO); + *buff_index += UART_BYTE_SIZE; + *valid_byte_count -= UART_BYTE_SIZE; + } +} + +static void pci1xxxx_rx_burst(struct uart_port *port, u32 uart_status) +{ + u32 valid_byte_count = uart_status & UART_BST_STAT_RX_COUNT_MASK; + struct tty_port *tty_port = &port->state->port; + unsigned char rx_buff[RX_BUF_SIZE]; + u32 buff_index = 0; + u32 copied_len; + + if (valid_byte_count != 0 && + valid_byte_count < RX_BUF_SIZE) { + pci1xxxx_process_read_data(port, rx_buff, &buff_index, + &valid_byte_count); + + copied_len = (u32)tty_insert_flip_string(tty_port, rx_buff, + buff_index); + + if (copied_len != buff_index) + port->icount.overrun += buff_index - copied_len; + + port->icount.rx += buff_index; + tty_flip_buffer_push(tty_port); + } +} + +static int pci1xxxx_handle_irq(struct uart_port *port) +{ + unsigned long flags; + u32 status; + + status = pci1xxxx_read_burst_status(port); + + if (status & UART_BST_STAT_IIR_INT_PEND) + return 0; + + spin_lock_irqsave(&port->lock, flags); + + if (status & UART_BST_STAT_LSR_RX_MASK) + pci1xxxx_rx_burst(port, status); + + spin_unlock_irqrestore(&port->lock, flags); + + return 1; +} static bool pci1xxxx_port_suspend(int line) { @@ -323,7 +475,7 @@ static int pci1xxxx_resume(struct device *dev) } static int pci1xxxx_setup(struct pci_dev *pdev, - struct uart_8250_port *port, int port_idx) + struct uart_8250_port *port, int port_idx, int rev) { int ret; @@ -335,6 +487,10 @@ static int pci1xxxx_setup(struct pci_dev *pdev, port->port.rs485_config = pci1xxxx_rs485_config; port->port.rs485_supported = pci1xxxx_rs485_supported; + /* From C0 rev Burst operation is supported */ + if (rev >= 0xC0) + port->port.handle_irq = pci1xxxx_handle_irq; + ret = serial8250_pci_setup_port(pdev, port, 0, PORT_OFFSET * port_idx, 0); if (ret < 0) return ret; @@ -370,6 +526,27 @@ static int pci1xxxx_logical_to_physical_port_translate(int subsys_dev, int port) return logical_to_physical_port_idx[0][port]; } +static int pci1xxxx_get_device_revision(struct pci1xxxx_8250 *priv) +{ + u32 regval; + int ret; + + /* + * DEV REV is a system register, HW Syslock bit + * should be acquired before accessing the register + */ + ret = pci1xxxx_acquire_sys_lock(priv); + if (ret) + return ret; + + regval = readl(priv->membase + UART_DEV_REV_REG); + priv->dev_rev = regval & UART_DEV_REV_MASK; + + pci1xxxx_release_sys_lock(priv); + + return 0; +} + static int pci1xxxx_serial_probe(struct pci_dev *pdev, const struct pci_device_id *id) { @@ -381,6 +558,7 @@ static int pci1xxxx_serial_probe(struct pci_dev *pdev, int num_vectors; int subsys_dev; int port_idx; + int ret; int rc; rc = pcim_enable_device(pdev); @@ -397,6 +575,10 @@ static int pci1xxxx_serial_probe(struct pci_dev *pdev, if (!priv->membase) return -ENOMEM; + ret = pci1xxxx_get_device_revision(priv); + if (ret) + return ret; + pci_set_master(pdev); priv->nr = nr_ports; @@ -428,7 +610,7 @@ static int pci1xxxx_serial_probe(struct pci_dev *pdev, else uart.port.irq = pci_irq_vector(pdev, 0); - rc = pci1xxxx_setup(pdev, &uart, port_idx); + rc = pci1xxxx_setup(pdev, &uart, port_idx, priv->dev_rev); if (rc) { dev_warn(dev, "Failed to setup port %u\n", i); continue; diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 1d65055dde..c0c34e410c 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -38,10 +38,6 @@ #include "8250.h" -/* Nuvoton NPCM timeout register */ -#define UART_NPCM_TOR 7 -#define UART_NPCM_TOIE BIT(7) /* Timeout Interrupt Enable */ - /* * Debugging. */ @@ -2229,15 +2225,6 @@ int serial8250_do_startup(struct uart_port *port) UART_DA830_PWREMU_MGMT_FREE); } - if (port->type == PORT_NPCM) { - /* - * Nuvoton calls the scratch register 'UART_TOR' (timeout - * register). Enable it, and set TIOC (timeout interrupt - * comparator) to be 0x20 for correct operation. - */ - serial_port_out(port, UART_NPCM_TOR, UART_NPCM_TOIE | 0x20); - } - #ifdef CONFIG_SERIAL_8250_RSA /* * If this is an RSA port, see if we can kick it up to the @@ -2539,15 +2526,6 @@ static void serial8250_shutdown(struct uart_port *port) serial8250_do_shutdown(port); } -/* Nuvoton NPCM UARTs have a custom divisor calculation */ -static unsigned int npcm_get_divisor(struct uart_8250_port *up, - unsigned int baud) -{ - struct uart_port *port = &up->port; - - return DIV_ROUND_CLOSEST(port->uartclk, 16 * baud + 2) - 2; -} - static unsigned int serial8250_do_get_divisor(struct uart_port *port, unsigned int baud, unsigned int *frac) @@ -2592,8 +2570,6 @@ static unsigned int serial8250_do_get_divisor(struct uart_port *port, quot = 0x8001; else if (magic_multiplier && baud >= port->uartclk / 12) quot = 0x8002; - else if (up->port.type == PORT_NPCM) - quot = npcm_get_divisor(up, baud); else quot = uart_get_divisor(port, baud); diff --git a/drivers/tty/serial/8250/8250_pxa.c b/drivers/tty/serial/8250/8250_pxa.c index a5b3ea27fc..77686da42c 100644 --- a/drivers/tty/serial/8250/8250_pxa.c +++ b/drivers/tty/serial/8250/8250_pxa.c @@ -146,20 +146,18 @@ static int serial_pxa_probe(struct platform_device *pdev) return ret; } -static int serial_pxa_remove(struct platform_device *pdev) +static void serial_pxa_remove(struct platform_device *pdev) { struct pxa8250_data *data = platform_get_drvdata(pdev); serial8250_unregister_port(data->line); clk_unprepare(data->clk); - - return 0; } static struct platform_driver serial_pxa_driver = { .probe = serial_pxa_probe, - .remove = serial_pxa_remove, + .remove_new = serial_pxa_remove, .driver = { .name = "pxa2xx-uart", diff --git a/drivers/tty/serial/8250/8250_tegra.c b/drivers/tty/serial/8250/8250_tegra.c index 89956bbf34..ba352262df 100644 --- a/drivers/tty/serial/8250/8250_tegra.c +++ b/drivers/tty/serial/8250/8250_tegra.c @@ -128,15 +128,13 @@ err_clkdisable: return ret; } -static int tegra_uart_remove(struct platform_device *pdev) +static void tegra_uart_remove(struct platform_device *pdev) { struct tegra_uart *uart = platform_get_drvdata(pdev); serial8250_unregister_port(uart->line); reset_control_assert(uart->rst); clk_disable_unprepare(uart->clk); - - return 0; } #ifdef CONFIG_PM_SLEEP @@ -192,7 +190,7 @@ static struct platform_driver tegra_uart_driver = { .acpi_match_table = ACPI_PTR(tegra_uart_acpi_match), }, .probe = tegra_uart_probe, - .remove = tegra_uart_remove, + .remove_new = tegra_uart_remove, }; module_platform_driver(tegra_uart_driver); diff --git a/drivers/tty/serial/8250/8250_uniphier.c b/drivers/tty/serial/8250/8250_uniphier.c index a405155264..6399a38ecc 100644 --- a/drivers/tty/serial/8250/8250_uniphier.c +++ b/drivers/tty/serial/8250/8250_uniphier.c @@ -241,14 +241,12 @@ static int uniphier_uart_probe(struct platform_device *pdev) return 0; } -static int uniphier_uart_remove(struct platform_device *pdev) +static void uniphier_uart_remove(struct platform_device *pdev) { struct uniphier8250_priv *priv = platform_get_drvdata(pdev); serial8250_unregister_port(priv->line); clk_disable_unprepare(priv->clk); - - return 0; } static int __maybe_unused uniphier_uart_suspend(struct device *dev) @@ -293,7 +291,7 @@ MODULE_DEVICE_TABLE(of, uniphier_uart_match); static struct platform_driver uniphier_uart_platform_driver = { .probe = uniphier_uart_probe, - .remove = uniphier_uart_remove, + .remove_new = uniphier_uart_remove, .driver = { .name = "uniphier-uart", .of_match_table = uniphier_uart_match, diff --git a/drivers/tty/serial/8250/serial_cs.c b/drivers/tty/serial/8250/serial_cs.c index dc2ef05a10..2056aed466 100644 --- a/drivers/tty/serial/8250/serial_cs.c +++ b/drivers/tty/serial/8250/serial_cs.c @@ -90,12 +90,6 @@ struct serial_info { const struct serial_quirk *quirk; }; -struct serial_cfg_mem { - tuple_t tuple; - cisparse_t parse; - u_char buf[256]; -}; - /* * vers_1 5.0, "Brain Boxes", "2-Port RS232 card", "r6" * manfid 0x0160, 0x0104 diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 732c893c8d..ffcf4882b2 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -87,7 +87,7 @@ config SERIAL_EARLYCON_SEMIHOST config SERIAL_EARLYCON_RISCV_SBI bool "Early console using RISC-V SBI" - depends on RISCV_SBI_V01 + depends on RISCV_SBI select SERIAL_CORE select SERIAL_CORE_CONSOLE select SERIAL_EARLYCON @@ -532,6 +532,9 @@ config SERIAL_UARTLITE_NR_UARTS help Set this to the number of uartlites in your system, or the number you think you might implement. + If maximum number of uartlite serial ports is more than 4, then the + driver uses dynamic allocation instead of static allocation for major + number. config SERIAL_SUNCORE bool diff --git a/drivers/tty/serial/altera_jtaguart.c b/drivers/tty/serial/altera_jtaguart.c index 7090b251dd..effcba71ea 100644 --- a/drivers/tty/serial/altera_jtaguart.c +++ b/drivers/tty/serial/altera_jtaguart.c @@ -425,7 +425,7 @@ static int altera_jtaguart_probe(struct platform_device *pdev) return 0; } -static int altera_jtaguart_remove(struct platform_device *pdev) +static void altera_jtaguart_remove(struct platform_device *pdev) { struct uart_port *port; int i = pdev->id; @@ -436,8 +436,6 @@ static int altera_jtaguart_remove(struct platform_device *pdev) port = &altera_jtaguart_ports[i]; uart_remove_one_port(&altera_jtaguart_driver, port); iounmap(port->membase); - - return 0; } #ifdef CONFIG_OF @@ -451,7 +449,7 @@ MODULE_DEVICE_TABLE(of, altera_jtaguart_match); static struct platform_driver altera_jtaguart_platform_driver = { .probe = altera_jtaguart_probe, - .remove = altera_jtaguart_remove, + .remove_new = altera_jtaguart_remove, .driver = { .name = DRV_NAME, .of_match_table = of_match_ptr(altera_jtaguart_match), diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c index 77835ac68d..897f0995b2 100644 --- a/drivers/tty/serial/altera_uart.c +++ b/drivers/tty/serial/altera_uart.c @@ -305,7 +305,7 @@ static int altera_uart_startup(struct uart_port *port) int ret; ret = request_irq(port->irq, altera_uart_interrupt, 0, - DRV_NAME, port); + dev_name(port->dev), port); if (ret) { pr_err(DRV_NAME ": unable to attach Altera UART %d " "interrupt vector=%d\n", port->line, port->irq); @@ -595,7 +595,7 @@ static int altera_uart_probe(struct platform_device *pdev) return 0; } -static int altera_uart_remove(struct platform_device *pdev) +static void altera_uart_remove(struct platform_device *pdev) { struct uart_port *port = platform_get_drvdata(pdev); @@ -604,8 +604,6 @@ static int altera_uart_remove(struct platform_device *pdev) port->mapbase = 0; iounmap(port->membase); } - - return 0; } #ifdef CONFIG_OF @@ -619,7 +617,7 @@ MODULE_DEVICE_TABLE(of, altera_uart_match); static struct platform_driver altera_uart_platform_driver = { .probe = altera_uart_probe, - .remove = altera_uart_remove, + .remove_new = altera_uart_remove, .driver = { .name = DRV_NAME, .of_match_table = of_match_ptr(altera_uart_match), diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 474e2b7f43..cf2c890a56 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -50,8 +50,8 @@ #define AMBA_ISR_PASS_LIMIT 256 -#define UART_DR_ERROR (UART011_DR_OE|UART011_DR_BE|UART011_DR_PE|UART011_DR_FE) -#define UART_DUMMY_DR_RX (1 << 16) +#define UART_DR_ERROR (UART011_DR_OE | UART011_DR_BE | UART011_DR_PE | UART011_DR_FE) +#define UART_DUMMY_DR_RX BIT(16) enum { REG_DR, @@ -125,7 +125,7 @@ static unsigned int get_fifosize_arm(struct amba_device *dev) static struct vendor_data vendor_arm = { .reg_offset = pl011_std_offsets, - .ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8, + .ifls = UART011_IFLS_RX4_8 | UART011_IFLS_TX4_8, .fr_busy = UART01x_FR_BUSY, .fr_dsr = UART01x_FR_DSR, .fr_cts = UART01x_FR_CTS, @@ -203,7 +203,7 @@ static unsigned int get_fifosize_st(struct amba_device *dev) static struct vendor_data vendor_st = { .reg_offset = pl011_st_offsets, - .ifls = UART011_IFLS_RX_HALF|UART011_IFLS_TX_HALF, + .ifls = UART011_IFLS_RX_HALF | UART011_IFLS_TX_HALF, .fr_busy = UART01x_FR_BUSY, .fr_dsr = UART01x_FR_DSR, .fr_cts = UART01x_FR_CTS, @@ -277,13 +277,13 @@ struct uart_amba_port { static unsigned int pl011_tx_empty(struct uart_port *port); static unsigned int pl011_reg_to_offset(const struct uart_amba_port *uap, - unsigned int reg) + unsigned int reg) { return uap->reg_offset[reg]; } static unsigned int pl011_read(const struct uart_amba_port *uap, - unsigned int reg) + unsigned int reg) { void __iomem *addr = uap->port.membase + pl011_reg_to_offset(uap, reg); @@ -292,7 +292,7 @@ static unsigned int pl011_read(const struct uart_amba_port *uap, } static void pl011_write(unsigned int val, const struct uart_amba_port *uap, - unsigned int reg) + unsigned int reg) { void __iomem *addr = uap->port.membase + pl011_reg_to_offset(uap, reg); @@ -330,10 +330,11 @@ static int pl011_fifo_to_tty(struct uart_amba_port *uap) uap->port.icount.brk++; if (uart_handle_break(&uap->port)) continue; - } else if (ch & UART011_DR_PE) + } else if (ch & UART011_DR_PE) { uap->port.icount.parity++; - else if (ch & UART011_DR_FE) + } else if (ch & UART011_DR_FE) { uap->port.icount.frame++; + } if (ch & UART011_DR_OE) uap->port.icount.overrun++; @@ -358,7 +359,6 @@ static int pl011_fifo_to_tty(struct uart_amba_port *uap) return fifotaken; } - /* * All the DMA operation mode stuff goes inside this ifdef. * This assumes that you have a generic DMA device interface, @@ -369,7 +369,7 @@ static int pl011_fifo_to_tty(struct uart_amba_port *uap) #define PL011_DMA_BUFFER_SIZE PAGE_SIZE static int pl011_dmabuf_init(struct dma_chan *chan, struct pl011_dmabuf *db, - enum dma_data_direction dir) + enum dma_data_direction dir) { db->buf = dma_alloc_coherent(chan->device->dev, PL011_DMA_BUFFER_SIZE, &db->dma, GFP_KERNEL); @@ -381,7 +381,7 @@ static int pl011_dmabuf_init(struct dma_chan *chan, struct pl011_dmabuf *db, } static void pl011_dmabuf_free(struct dma_chan *chan, struct pl011_dmabuf *db, - enum dma_data_direction dir) + enum dma_data_direction dir) { if (db->buf) { dma_free_coherent(chan->device->dev, @@ -424,7 +424,7 @@ static void pl011_dma_probe(struct uart_amba_port *uap) dma_cap_set(DMA_SLAVE, mask); chan = dma_request_channel(mask, plat->dma_filter, - plat->dma_tx_param); + plat->dma_tx_param); if (!chan) { dev_err(uap->port.dev, "no TX DMA channel!\n"); return; @@ -438,9 +438,9 @@ static void pl011_dma_probe(struct uart_amba_port *uap) dma_chan_name(uap->dmatx.chan)); /* Optionally make use of an RX channel as well */ - chan = dma_request_slave_channel(dev, "rx"); + chan = dma_request_chan(dev, "rx"); - if (!chan && plat && plat->dma_rx_param) { + if (IS_ERR(chan) && plat && plat->dma_rx_param) { chan = dma_request_channel(mask, plat->dma_filter, plat->dma_rx_param); if (!chan) { @@ -449,7 +449,7 @@ static void pl011_dma_probe(struct uart_amba_port *uap) } } - if (chan) { + if (!IS_ERR(chan)) { struct dma_slave_config rx_conf = { .src_addr = uap->port.mapbase + pl011_reg_to_offset(uap, REG_DR), @@ -465,12 +465,12 @@ static void pl011_dma_probe(struct uart_amba_port *uap) * If the controller does, check for suitable residue processing * otherwise assime all is well. */ - if (0 == dma_get_slave_caps(chan, &caps)) { + if (dma_get_slave_caps(chan, &caps) == 0) { if (caps.residue_granularity == DMA_RESIDUE_GRANULARITY_DESCRIPTOR) { dma_release_channel(chan); dev_info(uap->port.dev, - "RX DMA disabled - no residue processing\n"); + "RX DMA disabled - no residue processing\n"); return; } } @@ -499,18 +499,16 @@ static void pl011_dma_probe(struct uart_amba_port *uap) else uap->dmarx.poll_timeout = 3000; } else if (!plat && dev->of_node) { - uap->dmarx.auto_poll_rate = of_property_read_bool( - dev->of_node, "auto-poll"); + uap->dmarx.auto_poll_rate = + of_property_read_bool(dev->of_node, "auto-poll"); if (uap->dmarx.auto_poll_rate) { u32 x; - if (0 == of_property_read_u32(dev->of_node, - "poll-rate-ms", &x)) + if (of_property_read_u32(dev->of_node, "poll-rate-ms", &x) == 0) uap->dmarx.poll_rate = x; else uap->dmarx.poll_rate = 100; - if (0 == of_property_read_u32(dev->of_node, - "poll-timeout-ms", &x)) + if (of_property_read_u32(dev->of_node, "poll-timeout-ms", &x) == 0) uap->dmarx.poll_timeout = x; else uap->dmarx.poll_timeout = 3000; @@ -547,7 +545,7 @@ static void pl011_dma_tx_callback(void *data) uart_port_lock_irqsave(&uap->port, &flags); if (uap->dmatx.queued) dma_unmap_single(dmatx->chan->device->dev, dmatx->dma, - dmatx->len, DMA_TO_DEVICE); + dmatx->len, DMA_TO_DEVICE); dmacr = uap->dmacr; uap->dmacr = dmacr & ~UART011_TXDMAE; @@ -618,9 +616,9 @@ static int pl011_dma_tx_refill(struct uart_amba_port *uap) if (count > PL011_DMA_BUFFER_SIZE) count = PL011_DMA_BUFFER_SIZE; - if (xmit->tail < xmit->head) + if (xmit->tail < xmit->head) { memcpy(&dmatx->buf[0], &xmit->buf[xmit->tail], count); - else { + } else { size_t first = UART_XMIT_SIZE - xmit->tail; size_t second; @@ -643,7 +641,7 @@ static int pl011_dma_tx_refill(struct uart_amba_port *uap) } desc = dmaengine_prep_slave_single(chan, dmatx->dma, dmatx->len, DMA_MEM_TO_DEV, - DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) { dma_unmap_single(dma_dev->dev, dmatx->dma, dmatx->len, DMA_TO_DEVICE); uap->dmatx.queued = false; @@ -754,8 +752,9 @@ static inline bool pl011_dma_tx_start(struct uart_amba_port *uap) if (pl011_dma_tx_refill(uap) > 0) { uap->im &= ~UART011_TXIM; pl011_write(uap->im, uap, REG_IMSC); - } else + } else { ret = false; + } } else if (!(uap->dmacr & UART011_TXDMAE)) { uap->dmacr |= UART011_TXDMAE; pl011_write(uap->dmacr, uap, REG_DMACR); @@ -832,8 +831,8 @@ static int pl011_dma_rx_trigger_dma(struct uart_amba_port *uap) dbuf = uap->dmarx.use_buf_b ? &uap->dmarx.dbuf_b : &uap->dmarx.dbuf_a; desc = dmaengine_prep_slave_single(rxchan, dbuf->dma, dbuf->len, - DMA_DEV_TO_MEM, - DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + DMA_DEV_TO_MEM, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); /* * If the DMA engine is busy and cannot prepare a * channel, no big deal, the driver will fall back @@ -889,14 +888,12 @@ static void pl011_dma_rx_chars(struct uart_amba_port *uap, /* Pick the remain data from the DMA */ if (pending) { - /* * First take all chars in the DMA pipe, then look in the FIFO. * Note that tty_insert_flip_buf() tries to take as many chars * as it can. */ - dma_count = tty_insert_flip_string(port, dbuf->buf + dmataken, - pending); + dma_count = tty_insert_flip_string(port, dbuf->buf + dmataken, pending); uap->port.icount.rx += dma_count; if (dma_count < pending) @@ -978,8 +975,8 @@ static void pl011_dma_rx_irq(struct uart_amba_port *uap) /* Switch buffer & re-trigger DMA job */ dmarx->use_buf_b = !dmarx->use_buf_b; if (pl011_dma_rx_trigger_dma(uap)) { - dev_dbg(uap->port.dev, "could not retrigger RX DMA job " - "fall back to interrupt mode\n"); + dev_dbg(uap->port.dev, + "could not retrigger RX DMA job fall back to interrupt mode\n"); uap->im |= UART011_RXIM; pl011_write(uap->im, uap, REG_IMSC); } @@ -1026,8 +1023,8 @@ static void pl011_dma_rx_callback(void *data) * get some IRQ immediately from RX. */ if (ret) { - dev_dbg(uap->port.dev, "could not retrigger RX DMA job " - "fall back to interrupt mode\n"); + dev_dbg(uap->port.dev, + "could not retrigger RX DMA job fall back to interrupt mode\n"); uap->im |= UART011_RXIM; pl011_write(uap->im, uap, REG_IMSC); } @@ -1072,7 +1069,7 @@ static void pl011_dma_rx_poll(struct timer_list *t) dmataken = dbuf->len - dmarx->last_residue; size = dmarx->last_residue - state.residue; dma_count = tty_insert_flip_string(port, dbuf->buf + dmataken, - size); + size); if (dma_count == size) dmarx->last_residue = state.residue; dmarx->last_jiffies = jiffies; @@ -1085,7 +1082,6 @@ static void pl011_dma_rx_poll(struct timer_list *t) */ if (jiffies_to_msecs(jiffies - dmarx->last_jiffies) > uap->dmarx.poll_timeout) { - uart_port_lock_irqsave(&uap->port, &flags); pl011_dma_rx_stop(uap); uap->im |= UART011_RXIM; @@ -1097,7 +1093,7 @@ static void pl011_dma_rx_poll(struct timer_list *t) del_timer(&uap->dmarx.timer); } else { mod_timer(&uap->dmarx.timer, - jiffies + msecs_to_jiffies(uap->dmarx.poll_rate)); + jiffies + msecs_to_jiffies(uap->dmarx.poll_rate)); } } @@ -1113,7 +1109,6 @@ static void pl011_dma_startup(struct uart_amba_port *uap) uap->dmatx.buf = kmalloc(PL011_DMA_BUFFER_SIZE, GFP_KERNEL | __GFP_DMA); if (!uap->dmatx.buf) { - dev_err(uap->port.dev, "no memory for DMA TX buffer\n"); uap->port.fifosize = uap->fifosize; return; } @@ -1129,7 +1124,7 @@ static void pl011_dma_startup(struct uart_amba_port *uap) /* Allocate and map DMA RX buffers */ ret = pl011_dmabuf_init(uap->dmarx.chan, &uap->dmarx.dbuf_a, - DMA_FROM_DEVICE); + DMA_FROM_DEVICE); if (ret) { dev_err(uap->port.dev, "failed to init DMA %s: %d\n", "RX buffer A", ret); @@ -1137,12 +1132,12 @@ static void pl011_dma_startup(struct uart_amba_port *uap) } ret = pl011_dmabuf_init(uap->dmarx.chan, &uap->dmarx.dbuf_b, - DMA_FROM_DEVICE); + DMA_FROM_DEVICE); if (ret) { dev_err(uap->port.dev, "failed to init DMA %s: %d\n", "RX buffer B", ret); pl011_dmabuf_free(uap->dmarx.chan, &uap->dmarx.dbuf_a, - DMA_FROM_DEVICE); + DMA_FROM_DEVICE); goto skip_rx; } @@ -1164,13 +1159,12 @@ skip_rx: if (uap->using_rx_dma) { if (pl011_dma_rx_trigger_dma(uap)) - dev_dbg(uap->port.dev, "could not trigger initial " - "RX DMA job, fall back to interrupt mode\n"); + dev_dbg(uap->port.dev, + "could not trigger initial RX DMA job, fall back to interrupt mode\n"); if (uap->dmarx.poll_rate) { timer_setup(&uap->dmarx.timer, pl011_dma_rx_poll, 0); mod_timer(&uap->dmarx.timer, - jiffies + - msecs_to_jiffies(uap->dmarx.poll_rate)); + jiffies + msecs_to_jiffies(uap->dmarx.poll_rate)); uap->dmarx.last_residue = PL011_DMA_BUFFER_SIZE; uap->dmarx.last_jiffies = jiffies; } @@ -1389,8 +1383,8 @@ static void pl011_stop_rx(struct uart_port *port) struct uart_amba_port *uap = container_of(port, struct uart_amba_port, port); - uap->im &= ~(UART011_RXIM|UART011_RTIM|UART011_FEIM| - UART011_PEIM|UART011_BEIM|UART011_OEIM); + uap->im &= ~(UART011_RXIM | UART011_RTIM | UART011_FEIM | + UART011_PEIM | UART011_BEIM | UART011_OEIM); pl011_write(uap->im, uap, REG_IMSC); pl011_dma_rx_stop(uap); @@ -1410,7 +1404,7 @@ static void pl011_enable_ms(struct uart_port *port) struct uart_amba_port *uap = container_of(port, struct uart_amba_port, port); - uap->im |= UART011_RIMIM|UART011_CTSMIM|UART011_DCDMIM|UART011_DSRMIM; + uap->im |= UART011_RIMIM | UART011_CTSMIM | UART011_DCDMIM | UART011_DSRMIM; pl011_write(uap->im, uap, REG_IMSC); } @@ -1428,8 +1422,8 @@ __acquires(&uap->port.lock) */ if (pl011_dma_rx_available(uap)) { if (pl011_dma_rx_trigger_dma(uap)) { - dev_dbg(uap->port.dev, "could not trigger RX DMA job " - "fall back to interrupt mode again\n"); + dev_dbg(uap->port.dev, + "could not trigger RX DMA job fall back to interrupt mode again\n"); uap->im |= UART011_RXIM; pl011_write(uap->im, uap, REG_IMSC); } else { @@ -1439,8 +1433,7 @@ __acquires(&uap->port.lock) uap->dmarx.last_jiffies = jiffies; uap->dmarx.last_residue = PL011_DMA_BUFFER_SIZE; mod_timer(&uap->dmarx.timer, - jiffies + - msecs_to_jiffies(uap->dmarx.poll_rate)); + jiffies + msecs_to_jiffies(uap->dmarx.poll_rate)); } #endif } @@ -1557,18 +1550,17 @@ static irqreturn_t pl011_int(int irq, void *dev_id) do { check_apply_cts_event_workaround(uap); - pl011_write(status & ~(UART011_TXIS|UART011_RTIS| - UART011_RXIS), + pl011_write(status & ~(UART011_TXIS | UART011_RTIS | UART011_RXIS), uap, REG_ICR); - if (status & (UART011_RTIS|UART011_RXIS)) { + if (status & (UART011_RTIS | UART011_RXIS)) { if (pl011_dma_rx_running(uap)) pl011_dma_rx_irq(uap); else pl011_rx_chars(uap); } - if (status & (UART011_DSRMIS|UART011_DCDMIS| - UART011_CTSMIS|UART011_RIMIS)) + if (status & (UART011_DSRMIS | UART011_DCDMIS | + UART011_CTSMIS | UART011_RIMIS)) pl011_modem_status(uap); if (status & UART011_TXIS) pl011_tx_chars(uap, true); @@ -1598,6 +1590,12 @@ static unsigned int pl011_tx_empty(struct uart_port *port) 0 : TIOCSER_TEMT; } +static void pl011_maybe_set_bit(bool cond, unsigned int *ptr, unsigned int mask) +{ + if (cond) + *ptr |= mask; +} + static unsigned int pl011_get_mctrl(struct uart_port *port) { struct uart_amba_port *uap = @@ -1605,18 +1603,22 @@ static unsigned int pl011_get_mctrl(struct uart_port *port) unsigned int result = 0; unsigned int status = pl011_read(uap, REG_FR); -#define TIOCMBIT(uartbit, tiocmbit) \ - if (status & uartbit) \ - result |= tiocmbit + pl011_maybe_set_bit(status & UART01x_FR_DCD, &result, TIOCM_CAR); + pl011_maybe_set_bit(status & uap->vendor->fr_dsr, &result, TIOCM_DSR); + pl011_maybe_set_bit(status & uap->vendor->fr_cts, &result, TIOCM_CTS); + pl011_maybe_set_bit(status & uap->vendor->fr_ri, &result, TIOCM_RNG); - TIOCMBIT(UART01x_FR_DCD, TIOCM_CAR); - TIOCMBIT(uap->vendor->fr_dsr, TIOCM_DSR); - TIOCMBIT(uap->vendor->fr_cts, TIOCM_CTS); - TIOCMBIT(uap->vendor->fr_ri, TIOCM_RNG); -#undef TIOCMBIT return result; } +static void pl011_assign_bit(bool cond, unsigned int *ptr, unsigned int mask) +{ + if (cond) + *ptr |= mask; + else + *ptr &= ~mask; +} + static void pl011_set_mctrl(struct uart_port *port, unsigned int mctrl) { struct uart_amba_port *uap = @@ -1625,23 +1627,16 @@ static void pl011_set_mctrl(struct uart_port *port, unsigned int mctrl) cr = pl011_read(uap, REG_CR); -#define TIOCMBIT(tiocmbit, uartbit) \ - if (mctrl & tiocmbit) \ - cr |= uartbit; \ - else \ - cr &= ~uartbit - - TIOCMBIT(TIOCM_RTS, UART011_CR_RTS); - TIOCMBIT(TIOCM_DTR, UART011_CR_DTR); - TIOCMBIT(TIOCM_OUT1, UART011_CR_OUT1); - TIOCMBIT(TIOCM_OUT2, UART011_CR_OUT2); - TIOCMBIT(TIOCM_LOOP, UART011_CR_LBE); + pl011_assign_bit(mctrl & TIOCM_RTS, &cr, UART011_CR_RTS); + pl011_assign_bit(mctrl & TIOCM_DTR, &cr, UART011_CR_DTR); + pl011_assign_bit(mctrl & TIOCM_OUT1, &cr, UART011_CR_OUT1); + pl011_assign_bit(mctrl & TIOCM_OUT2, &cr, UART011_CR_OUT2); + pl011_assign_bit(mctrl & TIOCM_LOOP, &cr, UART011_CR_LBE); if (port->status & UPSTAT_AUTORTS) { /* We need to disable auto-RTS if we want to turn RTS off */ - TIOCMBIT(TIOCM_RTS, UART011_CR_RTSEN); + pl011_assign_bit(mctrl & TIOCM_RTS, &cr, UART011_CR_RTSEN); } -#undef TIOCMBIT pl011_write(cr, uap, REG_CR); } @@ -1707,8 +1702,7 @@ static int pl011_get_poll_char(struct uart_port *port) return pl011_read(uap, REG_DR); } -static void pl011_put_poll_char(struct uart_port *port, - unsigned char ch) +static void pl011_put_poll_char(struct uart_port *port, unsigned char ch) { struct uart_amba_port *uap = container_of(port, struct uart_amba_port, port); @@ -1909,14 +1903,13 @@ static int sbsa_uart_startup(struct uart_port *port) return 0; } -static void pl011_shutdown_channel(struct uart_amba_port *uap, - unsigned int lcrh) +static void pl011_shutdown_channel(struct uart_amba_port *uap, unsigned int lcrh) { - unsigned long val; + unsigned long val; - val = pl011_read(uap, lcrh); - val &= ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN); - pl011_write(val, uap, lcrh); + val = pl011_read(uap, lcrh); + val &= ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN); + pl011_write(val, uap, lcrh); } /* @@ -2065,7 +2058,7 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios, uap->dmarx.poll_rate = DIV_ROUND_UP(10000000, baud); #endif - if (baud > port->uartclk/16) + if (baud > port->uartclk / 16) quot = DIV_ROUND_CLOSEST(port->uartclk * 8, baud); else quot = DIV_ROUND_CLOSEST(port->uartclk * 4, baud); @@ -2147,9 +2140,9 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios, * else we see data corruption. */ if (uap->vendor->oversampling) { - if ((baud >= 3000000) && (baud < 3250000) && (quot > 1)) + if (baud >= 3000000 && baud < 3250000 && quot > 1) quot -= 1; - else if ((baud > 3250000) && (quot > 2)) + else if (baud > 3250000 && quot > 2) quot -= 2; } /* Set baud rate */ @@ -2218,13 +2211,14 @@ static void pl011_config_port(struct uart_port *port, int flags) static int pl011_verify_port(struct uart_port *port, struct serial_struct *ser) { int ret = 0; + if (ser->type != PORT_UNKNOWN && ser->type != PORT_AMBA) ret = -EINVAL; if (ser->irq < 0 || ser->irq >= nr_irqs) ret = -EINVAL; if (ser->baud_base < 9600) ret = -EINVAL; - if (port->mapbase != (unsigned long) ser->iomem_base) + if (port->mapbase != (unsigned long)ser->iomem_base) ret = -EINVAL; return ret; } @@ -2369,35 +2363,34 @@ pl011_console_write(struct console *co, const char *s, unsigned int count) static void pl011_console_get_options(struct uart_amba_port *uap, int *baud, int *parity, int *bits) { - if (pl011_read(uap, REG_CR) & UART01x_CR_UARTEN) { - unsigned int lcr_h, ibrd, fbrd; + unsigned int lcr_h, ibrd, fbrd; - lcr_h = pl011_read(uap, REG_LCRH_TX); + if (!(pl011_read(uap, REG_CR) & UART01x_CR_UARTEN)) + return; - *parity = 'n'; - if (lcr_h & UART01x_LCRH_PEN) { - if (lcr_h & UART01x_LCRH_EPS) - *parity = 'e'; - else - *parity = 'o'; - } + lcr_h = pl011_read(uap, REG_LCRH_TX); - if ((lcr_h & 0x60) == UART01x_LCRH_WLEN_7) - *bits = 7; + *parity = 'n'; + if (lcr_h & UART01x_LCRH_PEN) { + if (lcr_h & UART01x_LCRH_EPS) + *parity = 'e'; else - *bits = 8; + *parity = 'o'; + } + + if ((lcr_h & 0x60) == UART01x_LCRH_WLEN_7) + *bits = 7; + else + *bits = 8; - ibrd = pl011_read(uap, REG_IBRD); - fbrd = pl011_read(uap, REG_FBRD); + ibrd = pl011_read(uap, REG_IBRD); + fbrd = pl011_read(uap, REG_FBRD); - *baud = uap->port.uartclk * 4 / (64 * ibrd + fbrd); + *baud = uap->port.uartclk * 4 / (64 * ibrd + fbrd); - if (uap->vendor->oversampling) { - if (pl011_read(uap, REG_CR) - & ST_UART011_CR_OVSFACT) - *baud *= 2; - } - } + if (uap->vendor->oversampling && + (pl011_read(uap, REG_CR) & ST_UART011_CR_OVSFACT)) + *baud *= 2; } static int pl011_console_setup(struct console *co, char *options) @@ -2533,7 +2526,7 @@ static void qdf2400_e44_putc(struct uart_port *port, unsigned char c) cpu_relax(); } -static void qdf2400_e44_early_write(struct console *con, const char *s, unsigned n) +static void qdf2400_e44_early_write(struct console *con, const char *s, unsigned int n) { struct earlycon_device *dev = con->data; @@ -2552,7 +2545,7 @@ static void pl011_putc(struct uart_port *port, unsigned char c) cpu_relax(); } -static void pl011_early_write(struct console *con, const char *s, unsigned n) +static void pl011_early_write(struct console *con, const char *s, unsigned int n) { struct earlycon_device *dev = con->data; @@ -2613,7 +2606,9 @@ static int __init pl011_early_console_setup(struct earlycon_device *device, return 0; } + OF_EARLYCON_DECLARE(pl011, "arm,pl011", pl011_early_console_setup); + OF_EARLYCON_DECLARE(pl011, "arm,sbsa-uart", pl011_early_console_setup); /* @@ -2636,6 +2631,7 @@ qdf2400_e44_early_console_setup(struct earlycon_device *device, device->con->write = qdf2400_e44_early_write; return 0; } + EARLYCON_DECLARE(qdf2400_e44, qdf2400_e44_early_console_setup); #else @@ -2655,8 +2651,8 @@ static struct uart_driver amba_reg = { static int pl011_probe_dt_alias(int index, struct device *dev) { struct device_node *np; - static bool seen_dev_with_alias = false; - static bool seen_dev_without_alias = false; + static bool seen_dev_with_alias; + static bool seen_dev_without_alias; int ret = index; if (!IS_ENABLED(CONFIG_OF)) @@ -2672,7 +2668,7 @@ static int pl011_probe_dt_alias(int index, struct device *dev) ret = index; } else { seen_dev_with_alias = true; - if (ret >= ARRAY_SIZE(amba_ports) || amba_ports[ret] != NULL) { + if (ret >= ARRAY_SIZE(amba_ports) || amba_ports[ret]) { dev_warn(dev, "requested serial port %d not available.\n", ret); ret = index; } @@ -2706,7 +2702,7 @@ static int pl011_find_free_port(void) int i; for (i = 0; i < ARRAY_SIZE(amba_ports); i++) - if (amba_ports[i] == NULL) + if (!amba_ports[i]) return i; return -EBUSY; @@ -2873,6 +2869,22 @@ static int pl011_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(pl011_dev_pm_ops, pl011_suspend, pl011_resume); +#ifdef CONFIG_ACPI_SPCR_TABLE +static void qpdf2400_erratum44_workaround(struct device *dev, + struct uart_amba_port *uap) +{ + if (!qdf2400_e44_present) + return; + + dev_info(dev, "working around QDF2400 SoC erratum 44\n"); + uap->vendor = &vendor_qdt_qdf2400_e44; +} +#else +static void qpdf2400_erratum44_workaround(struct device *dev, + struct uart_amba_port *uap) +{ /* empty */ } +#endif + static int sbsa_uart_probe(struct platform_device *pdev) { struct uart_amba_port *uap; @@ -2908,13 +2920,8 @@ static int sbsa_uart_probe(struct platform_device *pdev) return ret; uap->port.irq = ret; -#ifdef CONFIG_ACPI_SPCR_TABLE - if (qdf2400_e44_present) { - dev_info(&pdev->dev, "working around QDF2400 SoC erratum 44\n"); - uap->vendor = &vendor_qdt_qdf2400_e44; - } else -#endif - uap->vendor = &vendor_sbsa; + uap->vendor = &vendor_sbsa; + qpdf2400_erratum44_workaround(&pdev->dev, uap); uap->reg_offset = uap->vendor->reg_offset; uap->fifosize = 32; @@ -2935,13 +2942,12 @@ static int sbsa_uart_probe(struct platform_device *pdev) return pl011_register_port(uap); } -static int sbsa_uart_remove(struct platform_device *pdev) +static void sbsa_uart_remove(struct platform_device *pdev) { struct uart_amba_port *uap = platform_get_drvdata(pdev); uart_remove_one_port(&amba_reg, &uap->port); pl011_unregister_port(uap); - return 0; } static const struct of_device_id sbsa_uart_of_match[] = { @@ -2959,7 +2965,7 @@ MODULE_DEVICE_TABLE(acpi, sbsa_uart_acpi_match); static struct platform_driver arm_sbsa_uart_platform_driver = { .probe = sbsa_uart_probe, - .remove = sbsa_uart_remove, + .remove_new = sbsa_uart_remove, .driver = { .name = "sbsa-uart", .pm = &pl011_dev_pm_ops, @@ -2998,7 +3004,7 @@ static struct amba_driver pl011_driver = { static int __init pl011_init(void) { - printk(KERN_INFO "Serial: AMBA PL011 UART driver\n"); + pr_info("Serial: AMBA PL011 UART driver\n"); if (platform_driver_register(&arm_sbsa_uart_platform_driver)) pr_warn("could not register SBSA UART platform driver\n"); diff --git a/drivers/tty/serial/ar933x_uart.c b/drivers/tty/serial/ar933x_uart.c index ffd2346731..8d09ace062 100644 --- a/drivers/tty/serial/ar933x_uart.c +++ b/drivers/tty/serial/ar933x_uart.c @@ -818,7 +818,7 @@ err_disable_clk: return ret; } -static int ar933x_uart_remove(struct platform_device *pdev) +static void ar933x_uart_remove(struct platform_device *pdev) { struct ar933x_uart_port *up; @@ -828,8 +828,6 @@ static int ar933x_uart_remove(struct platform_device *pdev) uart_remove_one_port(&ar933x_uart_driver, &up->port); clk_disable_unprepare(up->clk); } - - return 0; } #ifdef CONFIG_OF @@ -842,7 +840,7 @@ MODULE_DEVICE_TABLE(of, ar933x_uart_of_ids); static struct platform_driver ar933x_uart_platform_driver = { .probe = ar933x_uart_probe, - .remove = ar933x_uart_remove, + .remove_new = ar933x_uart_remove, .driver = { .name = DRIVER_NAME, .of_match_table = of_match_ptr(ar933x_uart_of_ids), diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 1946fafc3f..85667f7095 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -1013,14 +1013,18 @@ static int atmel_prepare_tx_dma(struct uart_port *port) struct device *mfd_dev = port->dev->parent; dma_cap_mask_t mask; struct dma_slave_config config; + struct dma_chan *chan; int ret, nent; dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); - atmel_port->chan_tx = dma_request_slave_channel(mfd_dev, "tx"); - if (atmel_port->chan_tx == NULL) + chan = dma_request_chan(mfd_dev, "tx"); + if (IS_ERR(chan)) { + atmel_port->chan_tx = NULL; goto chan_err; + } + atmel_port->chan_tx = chan; dev_info(port->dev, "using %s for tx DMA transfers\n", dma_chan_name(atmel_port->chan_tx)); @@ -1188,6 +1192,7 @@ static int atmel_prepare_rx_dma(struct uart_port *port) dma_cap_mask_t mask; struct dma_slave_config config; struct circ_buf *ring; + struct dma_chan *chan; int ret, nent; ring = &atmel_port->rx_ring; @@ -1195,9 +1200,12 @@ static int atmel_prepare_rx_dma(struct uart_port *port) dma_cap_zero(mask); dma_cap_set(DMA_CYCLIC, mask); - atmel_port->chan_rx = dma_request_slave_channel(mfd_dev, "rx"); - if (atmel_port->chan_rx == NULL) + chan = dma_request_chan(mfd_dev, "rx"); + if (IS_ERR(chan)) { + atmel_port->chan_rx = NULL; goto chan_err; + } + atmel_port->chan_rx = chan; dev_info(port->dev, "using %s for rx DMA transfers\n", dma_chan_name(atmel_port->chan_rx)); @@ -3001,7 +3009,7 @@ err: * protocol that needs bitbanging on IO lines, but use the regular serial * port in the normal case. */ -static int atmel_serial_remove(struct platform_device *pdev) +static void atmel_serial_remove(struct platform_device *pdev) { struct uart_port *port = platform_get_drvdata(pdev); struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); @@ -3020,8 +3028,6 @@ static int atmel_serial_remove(struct platform_device *pdev) clear_bit(port->line, atmel_ports_in_use); pdev->dev.of_node = NULL; - - return 0; } static SIMPLE_DEV_PM_OPS(atmel_serial_pm_ops, atmel_serial_suspend, @@ -3029,7 +3035,7 @@ static SIMPLE_DEV_PM_OPS(atmel_serial_pm_ops, atmel_serial_suspend, static struct platform_driver atmel_serial_driver = { .probe = atmel_serial_probe, - .remove = atmel_serial_remove, + .remove_new = atmel_serial_remove, .driver = { .name = "atmel_usart_serial", .of_match_table = of_match_ptr(atmel_serial_dt_ids), diff --git a/drivers/tty/serial/bcm63xx_uart.c b/drivers/tty/serial/bcm63xx_uart.c index 4a08fd5ee6..a3cefa1534 100644 --- a/drivers/tty/serial/bcm63xx_uart.c +++ b/drivers/tty/serial/bcm63xx_uart.c @@ -868,7 +868,7 @@ static int bcm_uart_probe(struct platform_device *pdev) return 0; } -static int bcm_uart_remove(struct platform_device *pdev) +static void bcm_uart_remove(struct platform_device *pdev) { struct uart_port *port; @@ -876,7 +876,6 @@ static int bcm_uart_remove(struct platform_device *pdev) uart_remove_one_port(&bcm_uart_driver, port); /* mark port as free */ ports[pdev->id].membase = NULL; - return 0; } static const struct of_device_id bcm63xx_of_match[] = { @@ -890,7 +889,7 @@ MODULE_DEVICE_TABLE(of, bcm63xx_of_match); */ static struct platform_driver bcm_uart_platform_driver = { .probe = bcm_uart_probe, - .remove = bcm_uart_remove, + .remove_new = bcm_uart_remove, .driver = { .name = "bcm63xx_uart", .of_match_table = bcm63xx_of_match, diff --git a/drivers/tty/serial/clps711x.c b/drivers/tty/serial/clps711x.c index 55d19937ef..7927725b89 100644 --- a/drivers/tty/serial/clps711x.c +++ b/drivers/tty/serial/clps711x.c @@ -510,13 +510,11 @@ static int uart_clps711x_probe(struct platform_device *pdev) return ret; } -static int uart_clps711x_remove(struct platform_device *pdev) +static void uart_clps711x_remove(struct platform_device *pdev) { struct clps711x_port *s = platform_get_drvdata(pdev); uart_remove_one_port(&clps711x_uart, &s->port); - - return 0; } static const struct of_device_id __maybe_unused clps711x_uart_dt_ids[] = { @@ -531,7 +529,7 @@ static struct platform_driver clps711x_uart_platform = { .of_match_table = of_match_ptr(clps711x_uart_dt_ids), }, .probe = uart_clps711x_probe, - .remove = uart_clps711x_remove, + .remove_new = uart_clps711x_remove, }; static int __init uart_clps711x_init(void) diff --git a/drivers/tty/serial/cpm_uart.c b/drivers/tty/serial/cpm_uart.c index be4af6eda4..df56c6c5af 100644 --- a/drivers/tty/serial/cpm_uart.c +++ b/drivers/tty/serial/cpm_uart.c @@ -1549,13 +1549,11 @@ static int cpm_uart_probe(struct platform_device *ofdev) return ret; } -static int cpm_uart_remove(struct platform_device *ofdev) +static void cpm_uart_remove(struct platform_device *ofdev) { struct uart_cpm_port *pinfo = platform_get_drvdata(ofdev); uart_remove_one_port(&cpm_reg, &pinfo->port); - - return 0; } static const struct of_device_id cpm_uart_match[] = { @@ -1581,7 +1579,7 @@ static struct platform_driver cpm_uart_driver = { .of_match_table = cpm_uart_match, }, .probe = cpm_uart_probe, - .remove = cpm_uart_remove, + .remove_new = cpm_uart_remove, }; static int __init cpm_uart_init(void) diff --git a/drivers/tty/serial/digicolor-usart.c b/drivers/tty/serial/digicolor-usart.c index 5004125f30..e419c4bde8 100644 --- a/drivers/tty/serial/digicolor-usart.c +++ b/drivers/tty/serial/digicolor-usart.c @@ -503,13 +503,11 @@ static int digicolor_uart_probe(struct platform_device *pdev) return uart_add_one_port(&digicolor_uart, &dp->port); } -static int digicolor_uart_remove(struct platform_device *pdev) +static void digicolor_uart_remove(struct platform_device *pdev) { struct uart_port *port = platform_get_drvdata(pdev); uart_remove_one_port(&digicolor_uart, port); - - return 0; } static const struct of_device_id digicolor_uart_dt_ids[] = { @@ -524,7 +522,7 @@ static struct platform_driver digicolor_uart_platform = { .of_match_table = of_match_ptr(digicolor_uart_dt_ids), }, .probe = digicolor_uart_probe, - .remove = digicolor_uart_remove, + .remove_new = digicolor_uart_remove, }; static int __init digicolor_uart_init(void) diff --git a/drivers/tty/serial/earlycon-riscv-sbi.c b/drivers/tty/serial/earlycon-riscv-sbi.c index 27afb0b74e..0162155f0c 100644 --- a/drivers/tty/serial/earlycon-riscv-sbi.c +++ b/drivers/tty/serial/earlycon-riscv-sbi.c @@ -15,17 +15,38 @@ static void sbi_putc(struct uart_port *port, unsigned char c) sbi_console_putchar(c); } -static void sbi_console_write(struct console *con, - const char *s, unsigned n) +static void sbi_0_1_console_write(struct console *con, + const char *s, unsigned int n) { struct earlycon_device *dev = con->data; uart_console_write(&dev->port, s, n, sbi_putc); } +static void sbi_dbcn_console_write(struct console *con, + const char *s, unsigned int n) +{ + int ret; + + while (n) { + ret = sbi_debug_console_write(s, n); + if (ret < 0) + break; + + s += ret; + n -= ret; + } +} + static int __init early_sbi_setup(struct earlycon_device *device, const char *opt) { - device->con->write = sbi_console_write; + if (sbi_debug_console_available) + device->con->write = sbi_dbcn_console_write; + else if (IS_ENABLED(CONFIG_RISCV_SBI_V01)) + device->con->write = sbi_0_1_console_write; + else + return -ENODEV; + return 0; } EARLYCON_DECLARE(sbi, early_sbi_setup); diff --git a/drivers/tty/serial/esp32_acm.c b/drivers/tty/serial/esp32_acm.c index cb28a87736..d4e8bdb1cd 100644 --- a/drivers/tty/serial/esp32_acm.c +++ b/drivers/tty/serial/esp32_acm.c @@ -8,7 +8,7 @@ #include #include #include -#include +#include #include #include #include @@ -413,18 +413,17 @@ static int esp32s3_acm_probe(struct platform_device *pdev) return uart_add_one_port(&esp32s3_acm_reg, port); } -static int esp32s3_acm_remove(struct platform_device *pdev) +static void esp32s3_acm_remove(struct platform_device *pdev) { struct uart_port *port = platform_get_drvdata(pdev); uart_remove_one_port(&esp32s3_acm_reg, port); - return 0; } static struct platform_driver esp32s3_acm_driver = { .probe = esp32s3_acm_probe, - .remove = esp32s3_acm_remove, + .remove_new = esp32s3_acm_remove, .driver = { .name = DRIVER_NAME, .of_match_table = esp32s3_acm_dt_ids, diff --git a/drivers/tty/serial/esp32_uart.c b/drivers/tty/serial/esp32_uart.c index 85c9c5ad7c..6fc61f3233 100644 --- a/drivers/tty/serial/esp32_uart.c +++ b/drivers/tty/serial/esp32_uart.c @@ -9,7 +9,8 @@ #include #include #include -#include +#include +#include #include #include #include @@ -678,16 +679,11 @@ static struct uart_driver esp32_uart_reg = { static int esp32_uart_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; - static const struct of_device_id *match; struct uart_port *port; struct esp32_port *sport; struct resource *res; int ret; - match = of_match_device(esp32_uart_dt_ids, &pdev->dev); - if (!match) - return -ENODEV; - sport = devm_kzalloc(&pdev->dev, sizeof(*sport), GFP_KERNEL); if (!sport) return -ENOMEM; @@ -728,7 +724,7 @@ static int esp32_uart_probe(struct platform_device *pdev) port->flags = UPF_BOOT_AUTOCONF; port->has_sysrq = 1; port->fifosize = ESP32_UART_TX_FIFO_SIZE; - port->private_data = (void *)match->data; + port->private_data = (void *)device_get_match_data(&pdev->dev); esp32_uart_ports[port->line] = sport; @@ -737,19 +733,17 @@ static int esp32_uart_probe(struct platform_device *pdev) return uart_add_one_port(&esp32_uart_reg, port); } -static int esp32_uart_remove(struct platform_device *pdev) +static void esp32_uart_remove(struct platform_device *pdev) { struct uart_port *port = platform_get_drvdata(pdev); uart_remove_one_port(&esp32_uart_reg, port); - - return 0; } static struct platform_driver esp32_uart_driver = { .probe = esp32_uart_probe, - .remove = esp32_uart_remove, + .remove_new = esp32_uart_remove, .driver = { .name = DRIVER_NAME, .of_match_table = esp32_uart_dt_ids, diff --git a/drivers/tty/serial/fsl_linflexuart.c b/drivers/tty/serial/fsl_linflexuart.c index 3bdaf1ddc3..52c87876a8 100644 --- a/drivers/tty/serial/fsl_linflexuart.c +++ b/drivers/tty/serial/fsl_linflexuart.c @@ -851,13 +851,11 @@ static int linflex_probe(struct platform_device *pdev) return uart_add_one_port(&linflex_reg, sport); } -static int linflex_remove(struct platform_device *pdev) +static void linflex_remove(struct platform_device *pdev) { struct uart_port *sport = platform_get_drvdata(pdev); uart_remove_one_port(&linflex_reg, sport); - - return 0; } #ifdef CONFIG_PM_SLEEP @@ -884,7 +882,7 @@ static SIMPLE_DEV_PM_OPS(linflex_pm_ops, linflex_suspend, linflex_resume); static struct platform_driver linflex_driver = { .probe = linflex_probe, - .remove = linflex_remove, + .remove_new = linflex_remove, .driver = { .name = DRIVER_NAME, .of_match_table = linflex_dt_ids, diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index 71d0cbd748..bbcbc91482 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -2962,7 +2962,7 @@ failed_reset: return ret; } -static int lpuart_remove(struct platform_device *pdev) +static void lpuart_remove(struct platform_device *pdev) { struct lpuart_port *sport = platform_get_drvdata(pdev); @@ -2979,7 +2979,6 @@ static int lpuart_remove(struct platform_device *pdev) pm_runtime_disable(&pdev->dev); pm_runtime_set_suspended(&pdev->dev); pm_runtime_dont_use_autosuspend(&pdev->dev); - return 0; } static int lpuart_runtime_suspend(struct device *dev) @@ -3213,7 +3212,7 @@ static const struct dev_pm_ops lpuart_pm_ops = { static struct platform_driver lpuart_driver = { .probe = lpuart_probe, - .remove = lpuart_remove, + .remove_new = lpuart_remove, .driver = { .name = "fsl-lpuart", .of_match_table = lpuart_dt_ids, diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 5545bf4a79..e148132506 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -1350,15 +1350,18 @@ static int imx_uart_dma_init(struct imx_port *sport) { struct dma_slave_config slave_config = {}; struct device *dev = sport->port.dev; + struct dma_chan *chan; int ret; /* Prepare for RX : */ - sport->dma_chan_rx = dma_request_slave_channel(dev, "rx"); - if (!sport->dma_chan_rx) { + chan = dma_request_chan(dev, "rx"); + if (IS_ERR(chan)) { dev_dbg(dev, "cannot get the DMA channel.\n"); - ret = -EINVAL; + sport->dma_chan_rx = NULL; + ret = PTR_ERR(chan); goto err; } + sport->dma_chan_rx = chan; slave_config.direction = DMA_DEV_TO_MEM; slave_config.src_addr = sport->port.mapbase + URXD0; @@ -1380,12 +1383,14 @@ static int imx_uart_dma_init(struct imx_port *sport) sport->rx_ring.buf = sport->rx_buf; /* Prepare for TX : */ - sport->dma_chan_tx = dma_request_slave_channel(dev, "tx"); - if (!sport->dma_chan_tx) { + chan = dma_request_chan(dev, "tx"); + if (IS_ERR(chan)) { dev_err(dev, "cannot get the TX DMA channel!\n"); - ret = -EINVAL; + sport->dma_chan_tx = NULL; + ret = PTR_ERR(chan); goto err; } + sport->dma_chan_tx = chan; slave_config.direction = DMA_MEM_TO_DEV; slave_config.dst_addr = sport->port.mapbase + URTX0; @@ -2469,13 +2474,11 @@ err_clk: return ret; } -static int imx_uart_remove(struct platform_device *pdev) +static void imx_uart_remove(struct platform_device *pdev) { struct imx_port *sport = platform_get_drvdata(pdev); uart_remove_one_port(&imx_uart_uart_driver, &sport->port); - - return 0; } static void imx_uart_restore_context(struct imx_port *sport) @@ -2644,7 +2647,7 @@ static const struct dev_pm_ops imx_uart_pm_ops = { static struct platform_driver imx_uart_platform_driver = { .probe = imx_uart_probe, - .remove = imx_uart_remove, + .remove_new = imx_uart_remove, .driver = { .name = "imx-uart", diff --git a/drivers/tty/serial/jsm/jsm.h b/drivers/tty/serial/jsm/jsm.h index 8489c07f4c..df55e5dc5a 100644 --- a/drivers/tty/serial/jsm/jsm.h +++ b/drivers/tty/serial/jsm/jsm.h @@ -115,8 +115,6 @@ struct board_ops { void (*send_start_character)(struct jsm_channel *ch); void (*send_stop_character)(struct jsm_channel *ch); void (*copy_data_from_queue_to_uart)(struct jsm_channel *ch); - u32 (*get_uart_bytes_left)(struct jsm_channel *ch); - void (*send_immediate_char)(struct jsm_channel *ch, unsigned char); }; @@ -127,7 +125,6 @@ struct jsm_board { int boardnum; /* Board number: 0-32 */ - int type; /* Type of board */ u8 rev; /* PCI revision ID */ struct pci_dev *pci_dev; u32 maxports; /* MAX ports this board can handle */ @@ -155,8 +152,6 @@ struct jsm_board u32 bd_dividend; /* Board/UARTs specific dividend */ struct board_ops *bd_ops; - - struct list_head jsm_board_entry; }; /************************************************************************ diff --git a/drivers/tty/serial/jsm/jsm_cls.c b/drivers/tty/serial/jsm/jsm_cls.c index 3fd57ac3ad..1eda48964c 100644 --- a/drivers/tty/serial/jsm/jsm_cls.c +++ b/drivers/tty/serial/jsm/jsm_cls.c @@ -877,28 +877,6 @@ static void cls_uart_off(struct jsm_channel *ch) writeb(0, &ch->ch_cls_uart->ier); } -/* - * cls_get_uarts_bytes_left. - * Returns 0 is nothing left in the FIFO, returns 1 otherwise. - * - * The channel lock MUST be held by the calling function. - */ -static u32 cls_get_uart_bytes_left(struct jsm_channel *ch) -{ - u8 left = 0; - u8 lsr = readb(&ch->ch_cls_uart->lsr); - - /* Determine whether the Transmitter is empty or not */ - if (!(lsr & UART_LSR_TEMT)) - left = 1; - else { - ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); - left = 0; - } - - return left; -} - /* * cls_send_break. * Starts sending a break thru the UART. @@ -916,18 +894,6 @@ static void cls_send_break(struct jsm_channel *ch) } } -/* - * cls_send_immediate_char. - * Sends a specific character as soon as possible to the UART, - * jumping over any bytes that might be in the write queue. - * - * The channel lock MUST be held by the calling function. - */ -static void cls_send_immediate_char(struct jsm_channel *ch, unsigned char c) -{ - writeb(c, &ch->ch_cls_uart->txrx); -} - struct board_ops jsm_cls_ops = { .intr = cls_intr, .uart_init = cls_uart_init, @@ -943,7 +909,5 @@ struct board_ops jsm_cls_ops = { .send_start_character = cls_send_start_character, .send_stop_character = cls_send_stop_character, .copy_data_from_queue_to_uart = cls_copy_data_from_queue_to_uart, - .get_uart_bytes_left = cls_get_uart_bytes_left, - .send_immediate_char = cls_send_immediate_char }; diff --git a/drivers/tty/serial/jsm/jsm_neo.c b/drivers/tty/serial/jsm/jsm_neo.c index 2bd6404289..1fa10f1936 100644 --- a/drivers/tty/serial/jsm/jsm_neo.c +++ b/drivers/tty/serial/jsm/jsm_neo.c @@ -1309,25 +1309,6 @@ static void neo_uart_off(struct jsm_channel *ch) writeb(0, &ch->ch_neo_uart->ier); } -static u32 neo_get_uart_bytes_left(struct jsm_channel *ch) -{ - u8 left = 0; - u8 lsr = readb(&ch->ch_neo_uart->lsr); - - /* We must cache the LSR as some of the bits get reset once read... */ - ch->ch_cached_lsr |= lsr; - - /* Determine whether the Transmitter is empty or not */ - if (!(lsr & UART_LSR_TEMT)) - left = 1; - else { - ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); - left = 0; - } - - return left; -} - /* Channel lock MUST be held by the calling function! */ static void neo_send_break(struct jsm_channel *ch) { @@ -1348,25 +1329,6 @@ static void neo_send_break(struct jsm_channel *ch) } } -/* - * neo_send_immediate_char. - * - * Sends a specific character as soon as possible to the UART, - * jumping over any bytes that might be in the write queue. - * - * The channel lock MUST be held by the calling function. - */ -static void neo_send_immediate_char(struct jsm_channel *ch, unsigned char c) -{ - if (!ch) - return; - - writeb(c, &ch->ch_neo_uart->txrx); - - /* flush write operation */ - neo_pci_posting_flush(ch->ch_bd); -} - struct board_ops jsm_neo_ops = { .intr = neo_intr, .uart_init = neo_uart_init, @@ -1382,6 +1344,4 @@ struct board_ops jsm_neo_ops = { .send_start_character = neo_send_start_character, .send_stop_character = neo_send_stop_character, .copy_data_from_queue_to_uart = neo_copy_data_from_queue_to_uart, - .get_uart_bytes_left = neo_get_uart_bytes_left, - .send_immediate_char = neo_send_immediate_char }; diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c index 3adb60c683..a0731773ce 100644 --- a/drivers/tty/serial/lantiq.c +++ b/drivers/tty/serial/lantiq.c @@ -887,13 +887,11 @@ static int lqasc_probe(struct platform_device *pdev) return ret; } -static int lqasc_remove(struct platform_device *pdev) +static void lqasc_remove(struct platform_device *pdev) { struct uart_port *port = platform_get_drvdata(pdev); uart_remove_one_port(&lqasc_reg, port); - - return 0; } static const struct ltq_soc_data soc_data_lantiq = { @@ -917,7 +915,7 @@ MODULE_DEVICE_TABLE(of, ltq_asc_match); static struct platform_driver lqasc_driver = { .probe = lqasc_probe, - .remove = lqasc_remove, + .remove_new = lqasc_remove, .driver = { .name = DRVNAME, .of_match_table = ltq_asc_match, diff --git a/drivers/tty/serial/liteuart.c b/drivers/tty/serial/liteuart.c index a25ab1efe3..3ce369f763 100644 --- a/drivers/tty/serial/liteuart.c +++ b/drivers/tty/serial/liteuart.c @@ -336,15 +336,13 @@ err_erase_id: return ret; } -static int liteuart_remove(struct platform_device *pdev) +static void liteuart_remove(struct platform_device *pdev) { struct uart_port *port = platform_get_drvdata(pdev); unsigned int line = port->line; uart_remove_one_port(&liteuart_driver, port); xa_erase(&liteuart_array, line); - - return 0; } static const struct of_device_id liteuart_of_match[] = { @@ -355,7 +353,7 @@ MODULE_DEVICE_TABLE(of, liteuart_of_match); static struct platform_driver liteuart_platform_driver = { .probe = liteuart_probe, - .remove = liteuart_remove, + .remove_new = liteuart_remove, .driver = { .name = KBUILD_MODNAME, .of_match_table = liteuart_of_match, diff --git a/drivers/tty/serial/lpc32xx_hs.c b/drivers/tty/serial/lpc32xx_hs.c index 5149a947b7..ec20329f06 100644 --- a/drivers/tty/serial/lpc32xx_hs.c +++ b/drivers/tty/serial/lpc32xx_hs.c @@ -659,13 +659,11 @@ static int serial_hs_lpc32xx_probe(struct platform_device *pdev) /* * Remove serial ports registered against a platform device. */ -static int serial_hs_lpc32xx_remove(struct platform_device *pdev) +static void serial_hs_lpc32xx_remove(struct platform_device *pdev) { struct lpc32xx_hsuart_port *p = platform_get_drvdata(pdev); uart_remove_one_port(&lpc32xx_hs_reg, &p->port); - - return 0; } @@ -702,7 +700,7 @@ MODULE_DEVICE_TABLE(of, serial_hs_lpc32xx_dt_ids); static struct platform_driver serial_hs_lpc32xx_driver = { .probe = serial_hs_lpc32xx_probe, - .remove = serial_hs_lpc32xx_remove, + .remove_new = serial_hs_lpc32xx_remove, .suspend = serial_hs_lpc32xx_suspend, .resume = serial_hs_lpc32xx_resume, .driver = { diff --git a/drivers/tty/serial/ma35d1_serial.c b/drivers/tty/serial/ma35d1_serial.c index 21b574f78b..19f0a305cc 100644 --- a/drivers/tty/serial/ma35d1_serial.c +++ b/drivers/tty/serial/ma35d1_serial.c @@ -558,7 +558,7 @@ static void ma35d1serial_console_write(struct console *co, const char *s, u32 co u32 ier; if ((co->index < 0) || (co->index >= MA35_UART_NR)) { - pr_warn("Failed to write on ononsole port %x, out of range\n", + pr_warn("Failed to write on console port %x, out of range\n", co->index); return; } @@ -754,14 +754,13 @@ err_iounmap: /* * Remove serial ports registered against a platform device. */ -static int ma35d1serial_remove(struct platform_device *dev) +static void ma35d1serial_remove(struct platform_device *dev) { struct uart_port *port = platform_get_drvdata(dev); struct uart_ma35d1_port *up = to_ma35d1_uart_port(port); uart_remove_one_port(&ma35d1serial_reg, port); clk_disable_unprepare(up->clk); - return 0; } static int ma35d1serial_suspend(struct platform_device *dev, pm_message_t state) @@ -794,7 +793,7 @@ static int ma35d1serial_resume(struct platform_device *dev) static struct platform_driver ma35d1serial_driver = { .probe = ma35d1serial_probe, - .remove = ma35d1serial_remove, + .remove_new = ma35d1serial_remove, .suspend = ma35d1serial_suspend, .resume = ma35d1serial_resume, .driver = { diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c index 1a4bb55652..198413df09 100644 --- a/drivers/tty/serial/max310x.c +++ b/drivers/tty/serial/max310x.c @@ -796,7 +796,7 @@ static void max310x_handle_tx(struct uart_port *port) to_send = uart_circ_chars_pending(xmit); until_end = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); if (likely(to_send)) { - /* Limit to size of TX FIFO */ + /* Limit to space available in TX FIFO */ txlen = max310x_port_read(port, MAX310X_TXFIFOLVL_REG); txlen = port->fifosize - txlen; to_send = (to_send > txlen) ? txlen : to_send; diff --git a/drivers/tty/serial/mcf.c b/drivers/tty/serial/mcf.c index 91b15243f6..8690a45239 100644 --- a/drivers/tty/serial/mcf.c +++ b/drivers/tty/serial/mcf.c @@ -627,7 +627,7 @@ static int mcf_probe(struct platform_device *pdev) /****************************************************************************/ -static int mcf_remove(struct platform_device *pdev) +static void mcf_remove(struct platform_device *pdev) { struct uart_port *port; int i; @@ -637,15 +637,13 @@ static int mcf_remove(struct platform_device *pdev) if (port) uart_remove_one_port(&mcf_driver, port); } - - return 0; } /****************************************************************************/ static struct platform_driver mcf_platform_driver = { .probe = mcf_probe, - .remove = mcf_remove, + .remove_new = mcf_remove, .driver = { .name = "mcfuart", }, diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c index 8dd84617e7..8395688f5e 100644 --- a/drivers/tty/serial/meson_uart.c +++ b/drivers/tty/serial/meson_uart.c @@ -795,7 +795,7 @@ static int meson_uart_probe(struct platform_device *pdev) return ret; } -static int meson_uart_remove(struct platform_device *pdev) +static void meson_uart_remove(struct platform_device *pdev) { struct uart_driver *uart_driver; struct uart_port *port; @@ -807,12 +807,10 @@ static int meson_uart_remove(struct platform_device *pdev) for (int id = 0; id < AML_UART_PORT_NUM; id++) if (meson_ports[id]) - return 0; + return; /* No more available uart ports, unregister uart driver */ uart_unregister_driver(uart_driver); - - return 0; } static struct meson_uart_data meson_g12a_uart_data = { @@ -852,7 +850,7 @@ MODULE_DEVICE_TABLE(of, meson_uart_dt_match); static struct platform_driver meson_uart_platform_driver = { .probe = meson_uart_probe, - .remove = meson_uart_remove, + .remove_new = meson_uart_remove, .driver = { .name = "meson_uart", .of_match_table = meson_uart_dt_match, diff --git a/drivers/tty/serial/milbeaut_usio.c b/drivers/tty/serial/milbeaut_usio.c index db3b81f2aa..da4c6f7e2a 100644 --- a/drivers/tty/serial/milbeaut_usio.c +++ b/drivers/tty/serial/milbeaut_usio.c @@ -552,15 +552,13 @@ failed: return ret; } -static int mlb_usio_remove(struct platform_device *pdev) +static void mlb_usio_remove(struct platform_device *pdev) { struct uart_port *port = &mlb_usio_ports[pdev->id]; struct clk *clk = port->private_data; uart_remove_one_port(&mlb_usio_uart_driver, port); clk_disable_unprepare(clk); - - return 0; } static const struct of_device_id mlb_usio_dt_ids[] = { @@ -571,7 +569,7 @@ MODULE_DEVICE_TABLE(of, mlb_usio_dt_ids); static struct platform_driver mlb_usio_driver = { .probe = mlb_usio_probe, - .remove = mlb_usio_remove, + .remove_new = mlb_usio_remove, .driver = { .name = USIO_NAME, .of_match_table = mlb_usio_dt_ids, diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c index a252465e74..95dae5e27b 100644 --- a/drivers/tty/serial/mpc52xx_uart.c +++ b/drivers/tty/serial/mpc52xx_uart.c @@ -1765,15 +1765,12 @@ static int mpc52xx_uart_of_probe(struct platform_device *op) return 0; } -static int -mpc52xx_uart_of_remove(struct platform_device *op) +static void mpc52xx_uart_of_remove(struct platform_device *op) { struct uart_port *port = platform_get_drvdata(op); if (port) uart_remove_one_port(&mpc52xx_uart_driver, port); - - return 0; } #ifdef CONFIG_PM @@ -1846,7 +1843,7 @@ MODULE_DEVICE_TABLE(of, mpc52xx_uart_of_match); static struct platform_driver mpc52xx_uart_of_driver = { .probe = mpc52xx_uart_of_probe, - .remove = mpc52xx_uart_of_remove, + .remove_new = mpc52xx_uart_of_remove, #ifdef CONFIG_PM .suspend = mpc52xx_uart_of_suspend, .resume = mpc52xx_uart_of_resume, diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c index 597264b546..e24204ad35 100644 --- a/drivers/tty/serial/msm_serial.c +++ b/drivers/tty/serial/msm_serial.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include #include @@ -1131,7 +1132,7 @@ static int msm_set_baud_rate(struct uart_port *port, unsigned int baud, uart_port_unlock_irqrestore(port, flags); entry = msm_find_best_baud(port, baud, &rate); - clk_set_rate(msm_port->clk, rate); + dev_pm_opp_set_rate(port->dev, rate); baud = rate / 16 / entry->divisor; uart_port_lock_irqsave(port, &flags); @@ -1186,6 +1187,7 @@ static void msm_init_clock(struct uart_port *port) { struct msm_port *msm_port = to_msm_port(port); + dev_pm_opp_set_rate(port->dev, port->uartclk); clk_prepare_enable(msm_port->clk); clk_prepare_enable(msm_port->pclk); msm_serial_set_mnd_regs(port); @@ -1239,6 +1241,7 @@ err_irq: clk_disable_unprepare(msm_port->pclk); clk_disable_unprepare(msm_port->clk); + dev_pm_opp_set_rate(port->dev, 0); return ret; } @@ -1254,6 +1257,7 @@ static void msm_shutdown(struct uart_port *port) msm_release_dma(msm_port); clk_disable_unprepare(msm_port->clk); + dev_pm_opp_set_rate(port->dev, 0); free_irq(port->irq, port); } @@ -1419,11 +1423,13 @@ static void msm_power(struct uart_port *port, unsigned int state, switch (state) { case 0: + dev_pm_opp_set_rate(port->dev, port->uartclk); clk_prepare_enable(msm_port->clk); clk_prepare_enable(msm_port->pclk); break; case 3: clk_disable_unprepare(msm_port->clk); + dev_pm_opp_set_rate(port->dev, 0); clk_disable_unprepare(msm_port->pclk); break; default: @@ -1789,7 +1795,7 @@ static int msm_serial_probe(struct platform_device *pdev) struct resource *resource; struct uart_port *port; const struct of_device_id *id; - int irq, line; + int irq, line, ret; if (pdev->dev.of_node) line = of_alias_get_id(pdev->dev.of_node, "serial"); @@ -1824,6 +1830,15 @@ static int msm_serial_probe(struct platform_device *pdev) return PTR_ERR(msm_port->pclk); } + ret = devm_pm_opp_set_clkname(&pdev->dev, "core"); + if (ret) + return ret; + + /* OPP table is optional */ + ret = devm_pm_opp_of_add_table(&pdev->dev); + if (ret && ret != -ENODEV) + return dev_err_probe(&pdev->dev, ret, "invalid OPP table\n"); + port->uartclk = clk_get_rate(msm_port->clk); dev_info(&pdev->dev, "uartclk = %d\n", port->uartclk); @@ -1843,13 +1858,11 @@ static int msm_serial_probe(struct platform_device *pdev) return uart_add_one_port(&msm_uart_driver, port); } -static int msm_serial_remove(struct platform_device *pdev) +static void msm_serial_remove(struct platform_device *pdev) { struct uart_port *port = platform_get_drvdata(pdev); uart_remove_one_port(&msm_uart_driver, port); - - return 0; } static const struct of_device_id msm_match_table[] = { @@ -1882,7 +1895,7 @@ static const struct dev_pm_ops msm_serial_dev_pm_ops = { }; static struct platform_driver msm_platform_driver = { - .remove = msm_serial_remove, + .remove_new = msm_serial_remove, .probe = msm_serial_probe, .driver = { .name = "msm_serial", diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c index 380a8b0590..1e8853eae5 100644 --- a/drivers/tty/serial/mxs-auart.c +++ b/drivers/tty/serial/mxs-auart.c @@ -907,21 +907,27 @@ static void mxs_auart_dma_exit(struct mxs_auart_port *s) static int mxs_auart_dma_init(struct mxs_auart_port *s) { + struct dma_chan *chan; + if (auart_dma_enabled(s)) return 0; /* init for RX */ - s->rx_dma_chan = dma_request_slave_channel(s->dev, "rx"); - if (!s->rx_dma_chan) + chan = dma_request_chan(s->dev, "rx"); + if (IS_ERR(chan)) goto err_out; + s->rx_dma_chan = chan; + s->rx_dma_buf = kzalloc(UART_XMIT_SIZE, GFP_KERNEL | GFP_DMA); if (!s->rx_dma_buf) goto err_out; /* init for TX */ - s->tx_dma_chan = dma_request_slave_channel(s->dev, "tx"); - if (!s->tx_dma_chan) + chan = dma_request_chan(s->dev, "tx"); + if (IS_ERR(chan)) goto err_out; + s->tx_dma_chan = chan; + s->tx_dma_buf = kzalloc(UART_XMIT_SIZE, GFP_KERNEL | GFP_DMA); if (!s->tx_dma_buf) goto err_out; @@ -1080,11 +1086,13 @@ static void mxs_auart_set_ldisc(struct uart_port *port, static irqreturn_t mxs_auart_irq_handle(int irq, void *context) { - u32 istat; + u32 istat, stat; struct mxs_auart_port *s = context; u32 mctrl_temp = s->mctrl_prev; - u32 stat = mxs_read(s, REG_STAT); + uart_port_lock(&s->port); + + stat = mxs_read(s, REG_STAT); istat = mxs_read(s, REG_INTR); /* ack irq */ @@ -1120,6 +1128,8 @@ static irqreturn_t mxs_auart_irq_handle(int irq, void *context) istat &= ~AUART_INTR_TXIS; } + uart_port_unlock(&s->port); + return IRQ_HANDLED; } @@ -1689,7 +1699,7 @@ out_disable_clks: return ret; } -static int mxs_auart_remove(struct platform_device *pdev) +static void mxs_auart_remove(struct platform_device *pdev) { struct mxs_auart_port *s = platform_get_drvdata(pdev); @@ -1701,13 +1711,11 @@ static int mxs_auart_remove(struct platform_device *pdev) clk_disable_unprepare(s->clk); clk_disable_unprepare(s->clk_ahb); } - - return 0; } static struct platform_driver mxs_auart_driver = { .probe = mxs_auart_probe, - .remove = mxs_auart_remove, + .remove_new = mxs_auart_remove, .driver = { .name = "mxs-auart", .of_match_table = mxs_auart_dt_ids, diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index f4c6ff8064..f5a0b401af 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -1659,7 +1659,7 @@ err_port_line: return ret; } -static int serial_omap_remove(struct platform_device *dev) +static void serial_omap_remove(struct platform_device *dev) { struct uart_omap_port *up = platform_get_drvdata(dev); @@ -1671,8 +1671,6 @@ static int serial_omap_remove(struct platform_device *dev) pm_runtime_disable(up->dev); cpu_latency_qos_remove_request(&up->pm_qos_request); device_init_wakeup(&dev->dev, false); - - return 0; } /* @@ -1809,7 +1807,7 @@ MODULE_DEVICE_TABLE(of, omap_serial_of_match); static struct platform_driver serial_omap_driver = { .probe = serial_omap_probe, - .remove = serial_omap_remove, + .remove_new = serial_omap_remove, .driver = { .name = OMAP_SERIAL_DRIVER_NAME, .pm = &serial_omap_dev_pm_ops, diff --git a/drivers/tty/serial/owl-uart.c b/drivers/tty/serial/owl-uart.c index 919f5e5aa0..d9fe853977 100644 --- a/drivers/tty/serial/owl-uart.c +++ b/drivers/tty/serial/owl-uart.c @@ -725,20 +725,18 @@ static int owl_uart_probe(struct platform_device *pdev) return ret; } -static int owl_uart_remove(struct platform_device *pdev) +static void owl_uart_remove(struct platform_device *pdev) { struct owl_uart_port *owl_port = platform_get_drvdata(pdev); uart_remove_one_port(&owl_uart_driver, &owl_port->port); owl_uart_ports[pdev->id] = NULL; clk_disable_unprepare(owl_port->clk); - - return 0; } static struct platform_driver owl_uart_platform_driver = { .probe = owl_uart_probe, - .remove = owl_uart_remove, + .remove_new = owl_uart_remove, .driver = { .name = "owl-uart", .of_match_table = owl_uart_dt_matches, diff --git a/drivers/tty/serial/pic32_uart.c b/drivers/tty/serial/pic32_uart.c index 3a95bf5d55..bbb46e6e98 100644 --- a/drivers/tty/serial/pic32_uart.c +++ b/drivers/tty/serial/pic32_uart.c @@ -938,7 +938,7 @@ err: return ret; } -static int pic32_uart_remove(struct platform_device *pdev) +static void pic32_uart_remove(struct platform_device *pdev) { struct uart_port *port = platform_get_drvdata(pdev); struct pic32_sport *sport = to_pic32_sport(port); @@ -947,9 +947,6 @@ static int pic32_uart_remove(struct platform_device *pdev) clk_disable_unprepare(sport->clk); platform_set_drvdata(pdev, NULL); pic32_sports[sport->idx] = NULL; - - /* automatic unroll of sport and gpios */ - return 0; } static const struct of_device_id pic32_serial_dt_ids[] = { @@ -960,7 +957,7 @@ MODULE_DEVICE_TABLE(of, pic32_serial_dt_ids); static struct platform_driver pic32_uart_platform_driver = { .probe = pic32_uart_probe, - .remove = pic32_uart_remove, + .remove_new = pic32_uart_remove, .driver = { .name = PIC32_DEV_NAME, .of_match_table = of_match_ptr(pic32_serial_dt_ids), diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c index c8bf08c19c..77691fbbf7 100644 --- a/drivers/tty/serial/pmac_zilog.c +++ b/drivers/tty/serial/pmac_zilog.c @@ -210,7 +210,6 @@ static bool pmz_receive_chars(struct uart_pmac_port *uap) { struct tty_port *port; unsigned char ch, r1, drop, flag; - int loops = 0; /* Sanity check, make sure the old bug is no longer happening */ if (uap->port.state == NULL) { @@ -291,24 +290,11 @@ static bool pmz_receive_chars(struct uart_pmac_port *uap) if (r1 & Rx_OVR) tty_insert_flip_char(port, 0, TTY_OVERRUN); next_char: - /* We can get stuck in an infinite loop getting char 0 when the - * line is in a wrong HW state, we break that here. - * When that happens, I disable the receive side of the driver. - * Note that what I've been experiencing is a real irq loop where - * I'm getting flooded regardless of the actual port speed. - * Something strange is going on with the HW - */ - if ((++loops) > 1000) - goto flood; ch = read_zsreg(uap, R0); if (!(ch & Rx_CH_AV)) break; } - return true; - flood: - pmz_interrupt_control(uap, 0); - pmz_error("pmz: rx irq flood !\n"); return true; } diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index 5499096440..99e08737f2 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -1698,7 +1698,7 @@ static int qcom_geni_serial_probe(struct platform_device *pdev) return 0; } -static int qcom_geni_serial_remove(struct platform_device *pdev) +static void qcom_geni_serial_remove(struct platform_device *pdev) { struct qcom_geni_serial_port *port = platform_get_drvdata(pdev); struct uart_driver *drv = port->private_data.drv; @@ -1706,8 +1706,6 @@ static int qcom_geni_serial_remove(struct platform_device *pdev) dev_pm_clear_wake_irq(&pdev->dev); device_init_wakeup(&pdev->dev, false); uart_remove_one_port(drv, &port->uport); - - return 0; } static int qcom_geni_serial_sys_suspend(struct device *dev) @@ -1807,7 +1805,7 @@ static const struct of_device_id qcom_geni_serial_match_table[] = { MODULE_DEVICE_TABLE(of, qcom_geni_serial_match_table); static struct platform_driver qcom_geni_serial_platform_driver = { - .remove = qcom_geni_serial_remove, + .remove_new = qcom_geni_serial_remove, .probe = qcom_geni_serial_probe, .driver = { .name = "qcom_geni_serial", diff --git a/drivers/tty/serial/rda-uart.c b/drivers/tty/serial/rda-uart.c index d824c8318f..13deb355cf 100644 --- a/drivers/tty/serial/rda-uart.c +++ b/drivers/tty/serial/rda-uart.c @@ -780,19 +780,17 @@ static int rda_uart_probe(struct platform_device *pdev) return ret; } -static int rda_uart_remove(struct platform_device *pdev) +static void rda_uart_remove(struct platform_device *pdev) { struct rda_uart_port *rda_port = platform_get_drvdata(pdev); uart_remove_one_port(&rda_uart_driver, &rda_port->port); rda_uart_ports[pdev->id] = NULL; - - return 0; } static struct platform_driver rda_uart_platform_driver = { .probe = rda_uart_probe, - .remove = rda_uart_remove, + .remove_new = rda_uart_remove, .driver = { .name = "rda-uart", .of_match_table = rda_uart_dt_matches, diff --git a/drivers/tty/serial/rp2.c b/drivers/tty/serial/rp2.c index d46a81cddf..4132fcff7d 100644 --- a/drivers/tty/serial/rp2.c +++ b/drivers/tty/serial/rp2.c @@ -178,7 +178,6 @@ struct rp2_card; struct rp2_uart_port { struct uart_port port; int idx; - int ignore_rx; struct rp2_card *card; void __iomem *asic_base; void __iomem *base; diff --git a/drivers/tty/serial/sa1100.c b/drivers/tty/serial/sa1100.c index be7bcd75d9..79c794fa65 100644 --- a/drivers/tty/serial/sa1100.c +++ b/drivers/tty/serial/sa1100.c @@ -870,19 +870,17 @@ static int sa1100_serial_probe(struct platform_device *dev) return 0; } -static int sa1100_serial_remove(struct platform_device *pdev) +static void sa1100_serial_remove(struct platform_device *pdev) { struct sa1100_port *sport = platform_get_drvdata(pdev); if (sport) uart_remove_one_port(&sa1100_reg, &sport->port); - - return 0; } static struct platform_driver sa11x0_serial_driver = { .probe = sa1100_serial_probe, - .remove = sa1100_serial_remove, + .remove_new = sa1100_serial_remove, .suspend = sa1100_serial_suspend, .resume = sa1100_serial_resume, .driver = { diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c index 06d140c9f5..6fdb32b833 100644 --- a/drivers/tty/serial/samsung_tty.c +++ b/drivers/tty/serial/samsung_tty.c @@ -2053,7 +2053,7 @@ static int s3c24xx_serial_probe(struct platform_device *pdev) return 0; } -static int s3c24xx_serial_remove(struct platform_device *dev) +static void s3c24xx_serial_remove(struct platform_device *dev) { struct uart_port *port = s3c24xx_dev_to_port(&dev->dev); @@ -2062,8 +2062,6 @@ static int s3c24xx_serial_remove(struct platform_device *dev) } uart_unregister_driver(&s3c24xx_uart_drv); - - return 0; } /* UART power management code */ @@ -2491,14 +2489,25 @@ static const struct s3c24xx_serial_drv_data exynos850_serial_drv_data = { .fifosize = { 256, 64, 64, 64 }, }; +/* + * Common drv_data struct for platforms that specify samsung,uart-fifosize in + * device tree. + */ +static const struct s3c24xx_serial_drv_data exynos_fifoszdt_serial_drv_data = { + EXYNOS_COMMON_SERIAL_DRV_DATA(), + .fifosize = { 0 }, +}; + #define EXYNOS4210_SERIAL_DRV_DATA (&exynos4210_serial_drv_data) #define EXYNOS5433_SERIAL_DRV_DATA (&exynos5433_serial_drv_data) #define EXYNOS850_SERIAL_DRV_DATA (&exynos850_serial_drv_data) +#define EXYNOS_FIFOSZDT_DRV_DATA (&exynos_fifoszdt_serial_drv_data) #else #define EXYNOS4210_SERIAL_DRV_DATA NULL #define EXYNOS5433_SERIAL_DRV_DATA NULL #define EXYNOS850_SERIAL_DRV_DATA NULL +#define EXYNOS_FIFOSZDT_DRV_DATA NULL #endif #ifdef CONFIG_ARCH_APPLE @@ -2582,6 +2591,9 @@ static const struct platform_device_id s3c24xx_serial_driver_ids[] = { }, { .name = "artpec8-uart", .driver_data = (kernel_ulong_t)ARTPEC8_SERIAL_DRV_DATA, + }, { + .name = "gs101-uart", + .driver_data = (kernel_ulong_t)EXYNOS_FIFOSZDT_DRV_DATA, }, { }, }; @@ -2603,6 +2615,8 @@ static const struct of_device_id s3c24xx_uart_dt_match[] = { .data = EXYNOS850_SERIAL_DRV_DATA }, { .compatible = "axis,artpec8-uart", .data = ARTPEC8_SERIAL_DRV_DATA }, + { .compatible = "google,gs101-uart", + .data = EXYNOS_FIFOSZDT_DRV_DATA }, {}, }; MODULE_DEVICE_TABLE(of, s3c24xx_uart_dt_match); @@ -2610,7 +2624,7 @@ MODULE_DEVICE_TABLE(of, s3c24xx_uart_dt_match); static struct platform_driver samsung_serial_driver = { .probe = s3c24xx_serial_probe, - .remove = s3c24xx_serial_remove, + .remove_new = s3c24xx_serial_remove, .id_table = s3c24xx_serial_driver_ids, .driver = { .name = "samsung-uart", diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index dba25e7090..929206a9a6 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -29,6 +29,7 @@ #define SC16IS7XX_NAME "sc16is7xx" #define SC16IS7XX_MAX_DEVS 8 +#define SC16IS7XX_MAX_PORTS 2 /* Maximum number of UART ports per IC. */ /* SC16IS7XX register definitions */ #define SC16IS7XX_RHR_REG (0x00) /* RX FIFO */ @@ -329,8 +330,9 @@ struct sc16is7xx_one { struct kthread_work reg_work; struct kthread_delayed_work ms_work; struct sc16is7xx_one_config config; - bool irda_mode; unsigned int old_mctrl; + u8 old_lcr; /* Value before EFR access. */ + bool irda_mode; }; struct sc16is7xx_port { @@ -347,17 +349,15 @@ struct sc16is7xx_port { struct sc16is7xx_one p[]; }; -static unsigned long sc16is7xx_lines; +static DECLARE_BITMAP(sc16is7xx_lines, SC16IS7XX_MAX_DEVS); static struct uart_driver sc16is7xx_uart = { .owner = THIS_MODULE, + .driver_name = SC16IS7XX_NAME, .dev_name = "ttySC", .nr = SC16IS7XX_MAX_DEVS, }; -static void sc16is7xx_ier_set(struct uart_port *port, u8 bit); -static void sc16is7xx_stop_tx(struct uart_port *port); - #define to_sc16is7xx_one(p,e) ((container_of((p), struct sc16is7xx_one, e))) static u8 sc16is7xx_port_read(struct uart_port *port, u8 reg) @@ -377,17 +377,15 @@ static void sc16is7xx_port_write(struct uart_port *port, u8 reg, u8 val) regmap_write(one->regmap, reg, val); } -static void sc16is7xx_fifo_read(struct uart_port *port, unsigned int rxlen) +static void sc16is7xx_fifo_read(struct uart_port *port, u8 *rxbuf, unsigned int rxlen) { - struct sc16is7xx_port *s = dev_get_drvdata(port->dev); struct sc16is7xx_one *one = to_sc16is7xx_one(port, port); - regmap_noinc_read(one->regmap, SC16IS7XX_RHR_REG, s->buf, rxlen); + regmap_noinc_read(one->regmap, SC16IS7XX_RHR_REG, rxbuf, rxlen); } -static void sc16is7xx_fifo_write(struct uart_port *port, u8 to_send) +static void sc16is7xx_fifo_write(struct uart_port *port, u8 *txbuf, u8 to_send) { - struct sc16is7xx_port *s = dev_get_drvdata(port->dev); struct sc16is7xx_one *one = to_sc16is7xx_one(port, port); /* @@ -397,7 +395,7 @@ static void sc16is7xx_fifo_write(struct uart_port *port, u8 to_send) if (unlikely(!to_send)) return; - regmap_noinc_write(one->regmap, SC16IS7XX_THR_REG, s->buf, to_send); + regmap_noinc_write(one->regmap, SC16IS7XX_THR_REG, txbuf, to_send); } static void sc16is7xx_port_update(struct uart_port *port, u8 reg, @@ -415,6 +413,85 @@ static void sc16is7xx_power(struct uart_port *port, int on) on ? 0 : SC16IS7XX_IER_SLEEP_BIT); } +/* + * In an amazing feat of design, the Enhanced Features Register (EFR) + * shares the address of the Interrupt Identification Register (IIR). + * Access to EFR is switched on by writing a magic value (0xbf) to the + * Line Control Register (LCR). Any interrupt firing during this time will + * see the EFR where it expects the IIR to be, leading to + * "Unexpected interrupt" messages. + * + * Prevent this possibility by claiming a mutex while accessing the EFR, + * and claiming the same mutex from within the interrupt handler. This is + * similar to disabling the interrupt, but that doesn't work because the + * bulk of the interrupt processing is run as a workqueue job in thread + * context. + */ +static void sc16is7xx_efr_lock(struct uart_port *port) +{ + struct sc16is7xx_one *one = to_sc16is7xx_one(port, port); + + mutex_lock(&one->efr_lock); + + /* Backup content of LCR. */ + one->old_lcr = sc16is7xx_port_read(port, SC16IS7XX_LCR_REG); + + /* Enable access to Enhanced register set */ + sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, SC16IS7XX_LCR_CONF_MODE_B); + + /* Disable cache updates when writing to EFR registers */ + regcache_cache_bypass(one->regmap, true); +} + +static void sc16is7xx_efr_unlock(struct uart_port *port) +{ + struct sc16is7xx_one *one = to_sc16is7xx_one(port, port); + + /* Re-enable cache updates when writing to normal registers */ + regcache_cache_bypass(one->regmap, false); + + /* Restore original content of LCR */ + sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, one->old_lcr); + + mutex_unlock(&one->efr_lock); +} + +static void sc16is7xx_ier_clear(struct uart_port *port, u8 bit) +{ + struct sc16is7xx_port *s = dev_get_drvdata(port->dev); + struct sc16is7xx_one *one = to_sc16is7xx_one(port, port); + + lockdep_assert_held_once(&port->lock); + + one->config.flags |= SC16IS7XX_RECONF_IER; + one->config.ier_mask |= bit; + one->config.ier_val &= ~bit; + kthread_queue_work(&s->kworker, &one->reg_work); +} + +static void sc16is7xx_ier_set(struct uart_port *port, u8 bit) +{ + struct sc16is7xx_port *s = dev_get_drvdata(port->dev); + struct sc16is7xx_one *one = to_sc16is7xx_one(port, port); + + lockdep_assert_held_once(&port->lock); + + one->config.flags |= SC16IS7XX_RECONF_IER; + one->config.ier_mask |= bit; + one->config.ier_val |= bit; + kthread_queue_work(&s->kworker, &one->reg_work); +} + +static void sc16is7xx_stop_tx(struct uart_port *port) +{ + sc16is7xx_ier_clear(port, SC16IS7XX_IER_THRI_BIT); +} + +static void sc16is7xx_stop_rx(struct uart_port *port) +{ + sc16is7xx_ier_clear(port, SC16IS7XX_IER_RDI_BIT); +} + static const struct sc16is7xx_devtype sc16is74x_devtype = { .name = "SC16IS74X", .nr_gpio = 0, @@ -458,10 +535,8 @@ static bool sc16is7xx_regmap_volatile(struct device *dev, unsigned int reg) case SC16IS7XX_IOCONTROL_REG: return true; default: - break; + return false; } - - return false; } static bool sc16is7xx_regmap_precious(struct device *dev, unsigned int reg) @@ -470,10 +545,8 @@ static bool sc16is7xx_regmap_precious(struct device *dev, unsigned int reg) case SC16IS7XX_RHR_REG: return true; default: - break; + return false; } - - return false; } static bool sc16is7xx_regmap_noinc(struct device *dev, unsigned int reg) @@ -488,50 +561,24 @@ static int sc16is7xx_set_baud(struct uart_port *port, int baud) u8 prescaler = 0; unsigned long clk = port->uartclk, div = clk / 16 / baud; - if (div > 0xffff) { + if (div >= BIT(16)) { prescaler = SC16IS7XX_MCR_CLKSEL_BIT; div /= 4; } - /* In an amazing feat of design, the Enhanced Features Register shares - * the address of the Interrupt Identification Register, and is - * switched in by writing a magic value (0xbf) to the Line Control - * Register. Any interrupt firing during this time will see the EFR - * where it expects the IIR to be, leading to "Unexpected interrupt" - * messages. - * - * Prevent this possibility by claiming a mutex while accessing the - * EFR, and claiming the same mutex from within the interrupt handler. - * This is similar to disabling the interrupt, but that doesn't work - * because the bulk of the interrupt processing is run as a workqueue - * job in thread context. - */ - mutex_lock(&one->efr_lock); - - lcr = sc16is7xx_port_read(port, SC16IS7XX_LCR_REG); - - /* Open the LCR divisors for configuration */ - sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, - SC16IS7XX_LCR_CONF_MODE_B); - /* Enable enhanced features */ - regcache_cache_bypass(one->regmap, true); + sc16is7xx_efr_lock(port); sc16is7xx_port_update(port, SC16IS7XX_EFR_REG, SC16IS7XX_EFR_ENABLE_BIT, SC16IS7XX_EFR_ENABLE_BIT); - - regcache_cache_bypass(one->regmap, false); - - /* Put LCR back to the normal mode */ - sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, lcr); - - mutex_unlock(&one->efr_lock); + sc16is7xx_efr_unlock(port); sc16is7xx_port_update(port, SC16IS7XX_MCR_REG, SC16IS7XX_MCR_CLKSEL_BIT, prescaler); - /* Open the LCR divisors for configuration */ + /* Backup LCR and access special register set (DLL/DLH) */ + lcr = sc16is7xx_port_read(port, SC16IS7XX_LCR_REG); sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, SC16IS7XX_LCR_CONF_MODE_A); @@ -541,7 +588,7 @@ static int sc16is7xx_set_baud(struct uart_port *port, int baud) sc16is7xx_port_write(port, SC16IS7XX_DLL_REG, div % 256); regcache_cache_bypass(one->regmap, false); - /* Put LCR back to the normal mode */ + /* Restore LCR and access to general register set */ sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, lcr); return DIV_ROUND_CLOSEST(clk / 16, div); @@ -577,7 +624,7 @@ static void sc16is7xx_handle_rx(struct uart_port *port, unsigned int rxlen, s->buf[0] = sc16is7xx_port_read(port, SC16IS7XX_RHR_REG); bytes_read = 1; } else { - sc16is7xx_fifo_read(port, rxlen); + sc16is7xx_fifo_read(port, s->buf, rxlen); bytes_read = rxlen; } @@ -650,7 +697,7 @@ static void sc16is7xx_handle_tx(struct uart_port *port) /* Get length of data pending in circular buffer */ to_send = uart_circ_chars_pending(xmit); if (likely(to_send)) { - /* Limit to size of TX FIFO */ + /* Limit to space available in TX FIFO */ txlen = sc16is7xx_port_read(port, SC16IS7XX_TXLVL_REG); if (txlen > SC16IS7XX_FIFO_SIZE) { dev_err_ratelimited(port->dev, @@ -666,7 +713,7 @@ static void sc16is7xx_handle_tx(struct uart_port *port) uart_xmit_advance(port, 1); } - sc16is7xx_fifo_write(port, to_send); + sc16is7xx_fifo_write(port, s->buf, to_send); } uart_port_lock_irqsave(port, &flags); @@ -871,42 +918,6 @@ static void sc16is7xx_reg_proc(struct kthread_work *ws) sc16is7xx_reconf_rs485(&one->port); } -static void sc16is7xx_ier_clear(struct uart_port *port, u8 bit) -{ - struct sc16is7xx_port *s = dev_get_drvdata(port->dev); - struct sc16is7xx_one *one = to_sc16is7xx_one(port, port); - - lockdep_assert_held_once(&port->lock); - - one->config.flags |= SC16IS7XX_RECONF_IER; - one->config.ier_mask |= bit; - one->config.ier_val &= ~bit; - kthread_queue_work(&s->kworker, &one->reg_work); -} - -static void sc16is7xx_ier_set(struct uart_port *port, u8 bit) -{ - struct sc16is7xx_port *s = dev_get_drvdata(port->dev); - struct sc16is7xx_one *one = to_sc16is7xx_one(port, port); - - lockdep_assert_held_once(&port->lock); - - one->config.flags |= SC16IS7XX_RECONF_IER; - one->config.ier_mask |= bit; - one->config.ier_val |= bit; - kthread_queue_work(&s->kworker, &one->reg_work); -} - -static void sc16is7xx_stop_tx(struct uart_port *port) -{ - sc16is7xx_ier_clear(port, SC16IS7XX_IER_THRI_BIT); -} - -static void sc16is7xx_stop_rx(struct uart_port *port) -{ - sc16is7xx_ier_clear(port, SC16IS7XX_IER_RDI_BIT); -} - static void sc16is7xx_ms_proc(struct kthread_work *ws) { struct sc16is7xx_one *one = to_sc16is7xx_one(ws, ms_work.work); @@ -1056,17 +1067,7 @@ static void sc16is7xx_set_termios(struct uart_port *port, if (!(termios->c_cflag & CREAD)) port->ignore_status_mask |= SC16IS7XX_LSR_BRK_ERROR_MASK; - /* As above, claim the mutex while accessing the EFR. */ - mutex_lock(&one->efr_lock); - - sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, - SC16IS7XX_LCR_CONF_MODE_B); - /* Configure flow control */ - regcache_cache_bypass(one->regmap, true); - sc16is7xx_port_write(port, SC16IS7XX_XON1_REG, termios->c_cc[VSTART]); - sc16is7xx_port_write(port, SC16IS7XX_XOFF1_REG, termios->c_cc[VSTOP]); - port->status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS); if (termios->c_cflag & CRTSCTS) { flow |= SC16IS7XX_EFR_AUTOCTS_BIT | @@ -1078,16 +1079,16 @@ static void sc16is7xx_set_termios(struct uart_port *port, if (termios->c_iflag & IXOFF) flow |= SC16IS7XX_EFR_SWFLOW1_BIT; - sc16is7xx_port_update(port, - SC16IS7XX_EFR_REG, - SC16IS7XX_EFR_FLOWCTRL_BITS, - flow); - regcache_cache_bypass(one->regmap, false); - /* Update LCR register */ sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, lcr); - mutex_unlock(&one->efr_lock); + /* Update EFR registers */ + sc16is7xx_efr_lock(port); + sc16is7xx_port_write(port, SC16IS7XX_XON1_REG, termios->c_cc[VSTART]); + sc16is7xx_port_write(port, SC16IS7XX_XOFF1_REG, termios->c_cc[VSTOP]); + sc16is7xx_port_update(port, SC16IS7XX_EFR_REG, + SC16IS7XX_EFR_FLOWCTRL_BITS, flow); + sc16is7xx_efr_unlock(port); /* Get baud rate generator configuration */ baud = uart_get_baud_rate(port, termios, old, @@ -1397,7 +1398,7 @@ static void sc16is7xx_setup_irda_ports(struct sc16is7xx_port *s) int i; int ret; int count; - u32 irda_port[2]; + u32 irda_port[SC16IS7XX_MAX_PORTS]; struct device *dev = s->p[0].port.dev; count = device_property_count_u32(dev, "irda-mode-ports"); @@ -1424,7 +1425,7 @@ static int sc16is7xx_setup_mctrl_ports(struct sc16is7xx_port *s, int i; int ret; int count; - u32 mctrl_port[2]; + u32 mctrl_port[SC16IS7XX_MAX_PORTS]; struct device *dev = s->p[0].port.dev; count = device_property_count_u32(dev, "nxp,modem-control-line-ports"); @@ -1536,7 +1537,7 @@ static int sc16is7xx_probe(struct device *dev, SC16IS7XX_IOCONTROL_SRESET_BIT); for (i = 0; i < devtype->nr_uart; ++i) { - s->p[i].port.line = find_first_zero_bit(&sc16is7xx_lines, + s->p[i].port.line = find_first_zero_bit(sc16is7xx_lines, SC16IS7XX_MAX_DEVS); if (s->p[i].port.line >= SC16IS7XX_MAX_DEVS) { ret = -ERANGE; @@ -1587,7 +1588,7 @@ static int sc16is7xx_probe(struct device *dev, if (ret) goto out_ports; - set_bit(s->p[i].port.line, &sc16is7xx_lines); + set_bit(s->p[i].port.line, sc16is7xx_lines); /* Enable EFR */ sc16is7xx_port_write(&s->p[i].port, SC16IS7XX_LCR_REG, @@ -1646,7 +1647,7 @@ static int sc16is7xx_probe(struct device *dev, out_ports: for (i = 0; i < devtype->nr_uart; i++) - if (test_and_clear_bit(s->p[i].port.line, &sc16is7xx_lines)) + if (test_and_clear_bit(s->p[i].port.line, sc16is7xx_lines)) uart_remove_one_port(&sc16is7xx_uart, &s->p[i].port); kthread_stop(s->kworker_task); @@ -1669,7 +1670,7 @@ static void sc16is7xx_remove(struct device *dev) for (i = 0; i < s->devtype->nr_uart; i++) { kthread_cancel_delayed_work_sync(&s->p[i].ms_work); - if (test_and_clear_bit(s->p[i].port.line, &sc16is7xx_lines)) + if (test_and_clear_bit(s->p[i].port.line, sc16is7xx_lines)) uart_remove_one_port(&sc16is7xx_uart, &s->p[i].port); sc16is7xx_power(&s->p[i].port, 0); } @@ -1726,7 +1727,7 @@ static unsigned int sc16is7xx_regmap_port_mask(unsigned int port_id) static int sc16is7xx_spi_probe(struct spi_device *spi) { const struct sc16is7xx_devtype *devtype; - struct regmap *regmaps[2]; + struct regmap *regmaps[SC16IS7XX_MAX_PORTS]; unsigned int i; int ret; @@ -1742,15 +1743,9 @@ static int sc16is7xx_spi_probe(struct spi_device *spi) if (ret) return ret; - if (spi->dev.of_node) { - devtype = device_get_match_data(&spi->dev); - if (!devtype) - return -ENODEV; - } else { - const struct spi_device_id *id_entry = spi_get_device_id(spi); - - devtype = (struct sc16is7xx_devtype *)id_entry->driver_data; - } + devtype = spi_get_device_match_data(spi); + if (!devtype) + return dev_err_probe(&spi->dev, -ENODEV, "Failed to match device\n"); for (i = 0; i < devtype->nr_uart; i++) { regcfg.name = sc16is7xx_regmap_name(i); @@ -1795,25 +1790,18 @@ static struct spi_driver sc16is7xx_spi_uart_driver = { .remove = sc16is7xx_spi_remove, .id_table = sc16is7xx_spi_id_table, }; - -MODULE_ALIAS("spi:sc16is7xx"); #endif #ifdef CONFIG_SERIAL_SC16IS7XX_I2C static int sc16is7xx_i2c_probe(struct i2c_client *i2c) { - const struct i2c_device_id *id = i2c_client_get_device_id(i2c); const struct sc16is7xx_devtype *devtype; - struct regmap *regmaps[2]; + struct regmap *regmaps[SC16IS7XX_MAX_PORTS]; unsigned int i; - if (i2c->dev.of_node) { - devtype = device_get_match_data(&i2c->dev); - if (!devtype) - return -ENODEV; - } else { - devtype = (struct sc16is7xx_devtype *)id->driver_data; - } + devtype = i2c_get_match_data(i2c); + if (!devtype) + return dev_err_probe(&i2c->dev, -ENODEV, "Failed to match device\n"); for (i = 0; i < devtype->nr_uart; i++) { regcfg.name = sc16is7xx_regmap_name(i); diff --git a/drivers/tty/serial/sccnxp.c b/drivers/tty/serial/sccnxp.c index 2be2c10980..f24217a560 100644 --- a/drivers/tty/serial/sccnxp.c +++ b/drivers/tty/serial/sccnxp.c @@ -1021,7 +1021,7 @@ err_out: return ret; } -static int sccnxp_remove(struct platform_device *pdev) +static void sccnxp_remove(struct platform_device *pdev) { int i; struct sccnxp_port *s = platform_get_drvdata(pdev); @@ -1036,10 +1036,11 @@ static int sccnxp_remove(struct platform_device *pdev) uart_unregister_driver(&s->uart); - if (!IS_ERR(s->regulator)) - return regulator_disable(s->regulator); - - return 0; + if (!IS_ERR(s->regulator)) { + int ret = regulator_disable(s->regulator); + if (ret) + dev_err(&pdev->dev, "Failed to disable regulator\n"); + } } static struct platform_driver sccnxp_uart_driver = { @@ -1047,7 +1048,7 @@ static struct platform_driver sccnxp_uart_driver = { .name = SCCNXP_NAME, }, .probe = sccnxp_probe, - .remove = sccnxp_remove, + .remove_new = sccnxp_remove, .id_table = sccnxp_id_table, }; module_platform_driver(sccnxp_uart_driver); diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c index 6d4006b419..525f3a2f7b 100644 --- a/drivers/tty/serial/serial-tegra.c +++ b/drivers/tty/serial/serial-tegra.c @@ -1611,13 +1611,12 @@ static int tegra_uart_probe(struct platform_device *pdev) return ret; } -static int tegra_uart_remove(struct platform_device *pdev) +static void tegra_uart_remove(struct platform_device *pdev) { struct tegra_uart_port *tup = platform_get_drvdata(pdev); struct uart_port *u = &tup->uport; uart_remove_one_port(&tegra_uart_driver, u); - return 0; } #ifdef CONFIG_PM_SLEEP @@ -1644,7 +1643,7 @@ static const struct dev_pm_ops tegra_uart_pm_ops = { static struct platform_driver tegra_uart_platform_driver = { .probe = tegra_uart_probe, - .remove = tegra_uart_remove, + .remove_new = tegra_uart_remove, .driver = { .name = "serial-tegra", .of_match_table = tegra_uart_of_match, diff --git a/drivers/tty/serial/serial_base.h b/drivers/tty/serial/serial_base.h index c74c548f0d..b6c38d2edf 100644 --- a/drivers/tty/serial/serial_base.h +++ b/drivers/tty/serial/serial_base.h @@ -22,6 +22,7 @@ struct serial_ctrl_device { struct serial_port_device { struct device dev; struct uart_port *port; + unsigned int tx_enabled:1; }; int serial_base_ctrl_init(void); @@ -30,6 +31,9 @@ void serial_base_ctrl_exit(void); int serial_base_port_init(void); void serial_base_port_exit(void); +void serial_base_port_startup(struct uart_port *port); +void serial_base_port_shutdown(struct uart_port *port); + int serial_base_driver_register(struct device_driver *driver); void serial_base_driver_unregister(struct device_driver *driver); diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index e383d9a10a..c476d88435 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -156,7 +156,7 @@ static void __uart_start(struct uart_state *state) * enabled, serial_port_runtime_resume() calls start_tx() again * after enabling the device. */ - if (!pm_runtime_enabled(port->dev) || pm_runtime_active(port->dev)) + if (!pm_runtime_enabled(port->dev) || pm_runtime_active(&port_dev->dev)) port->ops->start_tx(port); pm_runtime_mark_last_busy(&port_dev->dev); pm_runtime_put_autosuspend(&port_dev->dev); @@ -323,16 +323,26 @@ static int uart_startup(struct tty_struct *tty, struct uart_state *state, bool init_hw) { struct tty_port *port = &state->port; + struct uart_port *uport; int retval; if (tty_port_initialized(port)) - return 0; + goto out_base_port_startup; retval = uart_port_startup(tty, state, init_hw); - if (retval) + if (retval) { set_bit(TTY_IO_ERROR, &tty->flags); + return retval; + } - return retval; +out_base_port_startup: + uport = uart_port_check(state); + if (!uport) + return -EIO; + + serial_base_port_startup(uport); + + return 0; } /* @@ -355,6 +365,9 @@ static void uart_shutdown(struct tty_struct *tty, struct uart_state *state) if (tty) set_bit(TTY_IO_ERROR, &tty->flags); + if (uport) + serial_base_port_shutdown(uport); + if (tty_port_initialized(port)) { tty_port_set_initialized(port, false); @@ -410,11 +423,10 @@ void uart_update_timeout(struct uart_port *port, unsigned int cflag, unsigned int baud) { - unsigned int size = tty_get_frame_size(cflag); - u64 frame_time; + u64 temp = tty_get_frame_size(cflag); - frame_time = (u64)size * NSEC_PER_SEC; - port->frame_time = DIV64_U64_ROUND_UP(frame_time, baud); + temp *= NSEC_PER_SEC; + port->frame_time = (unsigned int)DIV64_U64_ROUND_UP(temp, baud); } EXPORT_SYMBOL(uart_update_timeout); @@ -687,7 +699,7 @@ EXPORT_SYMBOL_GPL(uart_xchar_out); * This function is used to send a high-priority XON/XOFF character to * the device */ -static void uart_send_xchar(struct tty_struct *tty, char ch) +static void uart_send_xchar(struct tty_struct *tty, u8 ch) { struct uart_state *state = tty->driver_data; struct uart_port *port; @@ -1371,6 +1383,12 @@ static void uart_sanitize_serial_rs485(struct uart_port *port, struct serial_rs4 return; } + /* Clear other RS485 flags but SER_RS485_TERMINATE_BUS and return if enabling RS422 */ + if (rs485->flags & SER_RS485_MODE_RS422) { + rs485->flags &= (SER_RS485_ENABLED | SER_RS485_MODE_RS422 | SER_RS485_TERMINATE_BUS); + return; + } + rs485->flags &= supported_flags; /* Pick sane settings if the user hasn't */ @@ -1770,6 +1788,7 @@ static void uart_tty_port_shutdown(struct tty_port *port) uport->ops->stop_rx(uport); uart_port_unlock_irq(uport); + serial_base_port_shutdown(uport); uart_port_shutdown(port); /* @@ -1783,6 +1802,7 @@ static void uart_tty_port_shutdown(struct tty_port *port) * Free the transmit buffer. */ uart_port_lock_irq(uport); + uart_circ_clear(&state->xmit); buf = state->xmit.buf; state->xmit.buf = NULL; uart_port_unlock_irq(uport); @@ -2372,7 +2392,7 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport) mutex_lock(&port->mutex); - tty_dev = device_find_child(uport->dev, &match, serial_match_port); + tty_dev = device_find_child(&uport->port_dev->dev, &match, serial_match_port); if (tty_dev && device_may_wakeup(tty_dev)) { enable_irq_wake(uport->irq); put_device(tty_dev); @@ -2453,7 +2473,7 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport) mutex_lock(&port->mutex); - tty_dev = device_find_child(uport->dev, &match, serial_match_port); + tty_dev = device_find_child(&uport->port_dev->dev, &match, serial_match_port); if (!uport->suspended && device_may_wakeup(tty_dev)) { if (irqd_is_wakeup_set(irq_get_irq_data((uport->irq)))) disable_irq_wake(uport->irq); @@ -2675,7 +2695,8 @@ static int uart_poll_init(struct tty_driver *driver, int line, char *options) mutex_lock(&tport->mutex); port = uart_port_check(state); - if (!port || !(port->ops->poll_get_char && port->ops->poll_put_char)) { + if (!port || port->type == PORT_UNKNOWN || + !(port->ops->poll_get_char && port->ops->poll_put_char)) { ret = -1; goto out; } @@ -3195,7 +3216,8 @@ static int serial_core_add_one_port(struct uart_driver *drv, struct uart_port *u * setserial to be used to alter this port's parameters. */ tty_dev = tty_port_register_device_attr_serdev(port, drv->tty_driver, - uport->line, uport->dev, port, uport->tty_groups); + uport->line, uport->dev, &uport->port_dev->dev, port, + uport->tty_groups); if (!IS_ERR(tty_dev)) { device_set_wakeup_capable(tty_dev, 1); } else { diff --git a/drivers/tty/serial/serial_port.c b/drivers/tty/serial/serial_port.c index 72b6f4f326..7d51e66ec8 100644 --- a/drivers/tty/serial/serial_port.c +++ b/drivers/tty/serial/serial_port.c @@ -36,8 +36,12 @@ static int serial_port_runtime_resume(struct device *dev) /* Flush any pending TX for the port */ uart_port_lock_irqsave(port, &flags); + if (!port_dev->tx_enabled) + goto unlock; if (__serial_port_busy(port)) port->ops->start_tx(port); + +unlock: uart_port_unlock_irqrestore(port, flags); out: @@ -57,6 +61,11 @@ static int serial_port_runtime_suspend(struct device *dev) return 0; uart_port_lock_irqsave(port, &flags); + if (!port_dev->tx_enabled) { + uart_port_unlock_irqrestore(port, flags); + return 0; + } + busy = __serial_port_busy(port); if (busy) port->ops->start_tx(port); @@ -68,6 +77,31 @@ static int serial_port_runtime_suspend(struct device *dev) return busy ? -EBUSY : 0; } +static void serial_base_port_set_tx(struct uart_port *port, + struct serial_port_device *port_dev, + bool enabled) +{ + unsigned long flags; + + uart_port_lock_irqsave(port, &flags); + port_dev->tx_enabled = enabled; + uart_port_unlock_irqrestore(port, flags); +} + +void serial_base_port_startup(struct uart_port *port) +{ + struct serial_port_device *port_dev = port->port_dev; + + serial_base_port_set_tx(port, port_dev, true); +} + +void serial_base_port_shutdown(struct uart_port *port) +{ + struct serial_port_device *port_dev = port->port_dev; + + serial_base_port_set_tx(port, port_dev, false); +} + static DEFINE_RUNTIME_DEV_PM_OPS(serial_port_pm, serial_port_runtime_suspend, serial_port_runtime_resume, NULL); diff --git a/drivers/tty/serial/serial_txx9.c b/drivers/tty/serial/serial_txx9.c index eaa9807224..e1897894a4 100644 --- a/drivers/tty/serial/serial_txx9.c +++ b/drivers/tty/serial/serial_txx9.c @@ -1052,7 +1052,7 @@ static int serial_txx9_probe(struct platform_device *dev) /* * Remove serial ports registered against a platform device. */ -static int serial_txx9_remove(struct platform_device *dev) +static void serial_txx9_remove(struct platform_device *dev) { int i; @@ -1062,7 +1062,6 @@ static int serial_txx9_remove(struct platform_device *dev) if (up->dev == &dev->dev) serial_txx9_unregister_port(i); } - return 0; } #ifdef CONFIG_PM @@ -1097,7 +1096,7 @@ static int serial_txx9_resume(struct platform_device *dev) static struct platform_driver serial_txx9_plat_driver = { .probe = serial_txx9_probe, - .remove = serial_txx9_remove, + .remove_new = serial_txx9_remove, #ifdef CONFIG_PM .suspend = serial_txx9_suspend, .resume = serial_txx9_resume, diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 84ab434c94..a85e7b9a2e 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -1558,10 +1558,9 @@ static struct dma_chan *sci_request_dma_chan(struct uart_port *port, struct dma_slave_config cfg; int ret; - chan = dma_request_slave_channel(port->dev, - dir == DMA_MEM_TO_DEV ? "tx" : "rx"); - if (!chan) { - dev_dbg(port->dev, "dma_request_slave_channel failed\n"); + chan = dma_request_chan(port->dev, dir == DMA_MEM_TO_DEV ? "tx" : "rx"); + if (IS_ERR(chan)) { + dev_dbg(port->dev, "dma_request_chan failed\n"); return NULL; } @@ -3190,7 +3189,7 @@ static struct uart_driver sci_uart_driver = { .cons = SCI_CONSOLE, }; -static int sci_remove(struct platform_device *dev) +static void sci_remove(struct platform_device *dev) { struct sci_port *port = platform_get_drvdata(dev); unsigned int type = port->port.type; /* uart_remove_... clears it */ @@ -3204,8 +3203,6 @@ static int sci_remove(struct platform_device *dev) device_remove_file(&dev->dev, &dev_attr_rx_fifo_trigger); if (type == PORT_SCIFA || type == PORT_SCIFB || type == PORT_HSCIF) device_remove_file(&dev->dev, &dev_attr_rx_fifo_timeout); - - return 0; } @@ -3470,7 +3467,7 @@ static SIMPLE_DEV_PM_OPS(sci_dev_pm_ops, sci_suspend, sci_resume); static struct platform_driver sci_driver = { .probe = sci_probe, - .remove = sci_remove, + .remove_new = sci_remove, .driver = { .name = "sh-sci", .pm = &sci_dev_pm_ops, diff --git a/drivers/tty/serial/sifive.c b/drivers/tty/serial/sifive.c index b296e57a9d..a4cc569a78 100644 --- a/drivers/tty/serial/sifive.c +++ b/drivers/tty/serial/sifive.c @@ -1007,7 +1007,7 @@ probe_out1: return r; } -static int sifive_serial_remove(struct platform_device *dev) +static void sifive_serial_remove(struct platform_device *dev) { struct sifive_serial_port *ssp = platform_get_drvdata(dev); @@ -1015,8 +1015,6 @@ static int sifive_serial_remove(struct platform_device *dev) uart_remove_one_port(&sifive_serial_uart_driver, &ssp->port); free_irq(ssp->port.irq, ssp); clk_notifier_unregister(ssp->clk, &ssp->clk_notifier); - - return 0; } static int sifive_serial_suspend(struct device *dev) @@ -1033,8 +1031,8 @@ static int sifive_serial_resume(struct device *dev) return uart_resume_port(&sifive_serial_uart_driver, &ssp->port); } -DEFINE_SIMPLE_DEV_PM_OPS(sifive_uart_pm_ops, sifive_serial_suspend, - sifive_serial_resume); +static DEFINE_SIMPLE_DEV_PM_OPS(sifive_uart_pm_ops, sifive_serial_suspend, + sifive_serial_resume); static const struct of_device_id sifive_serial_of_match[] = { { .compatible = "sifive,fu540-c000-uart0" }, @@ -1045,7 +1043,7 @@ MODULE_DEVICE_TABLE(of, sifive_serial_of_match); static struct platform_driver sifive_serial_platform_driver = { .probe = sifive_serial_probe, - .remove = sifive_serial_remove, + .remove_new = sifive_serial_remove, .driver = { .name = SIFIVE_SERIAL_NAME, .pm = pm_sleep_ptr(&sifive_uart_pm_ops), diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c index f257525f92..15f14fa593 100644 --- a/drivers/tty/serial/sprd_serial.c +++ b/drivers/tty/serial/sprd_serial.c @@ -1076,7 +1076,7 @@ static struct uart_driver sprd_uart_driver = { .cons = SPRD_CONSOLE, }; -static int sprd_remove(struct platform_device *dev) +static void sprd_remove(struct platform_device *dev) { struct sprd_uart_port *sup = platform_get_drvdata(dev); @@ -1089,8 +1089,6 @@ static int sprd_remove(struct platform_device *dev) if (!sprd_ports_num) uart_unregister_driver(&sprd_uart_driver); - - return 0; } static bool sprd_uart_is_console(struct uart_port *uport) @@ -1257,7 +1255,7 @@ MODULE_DEVICE_TABLE(of, serial_ids); static struct platform_driver sprd_platform_driver = { .probe = sprd_probe, - .remove = sprd_remove, + .remove_new = sprd_remove, .driver = { .name = "sprd_serial", .of_match_table = serial_ids, diff --git a/drivers/tty/serial/st-asc.c b/drivers/tty/serial/st-asc.c index a821f5d76a..bbb5595d7e 100644 --- a/drivers/tty/serial/st-asc.c +++ b/drivers/tty/serial/st-asc.c @@ -793,13 +793,11 @@ static int asc_serial_probe(struct platform_device *pdev) return 0; } -static int asc_serial_remove(struct platform_device *pdev) +static void asc_serial_remove(struct platform_device *pdev) { struct uart_port *port = platform_get_drvdata(pdev); uart_remove_one_port(&asc_uart_driver, port); - - return 0; } #ifdef CONFIG_PM_SLEEP @@ -932,7 +930,7 @@ static const struct dev_pm_ops asc_serial_pm_ops = { static struct platform_driver asc_serial_driver = { .probe = asc_serial_probe, - .remove = asc_serial_remove, + .remove_new = asc_serial_remove, .driver = { .name = DRIVER_NAME, .pm = &asc_serial_pm_ops, diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c index e93e3a9b48..d103b07d10 100644 --- a/drivers/tty/serial/stm32-usart.c +++ b/drivers/tty/serial/stm32-usart.c @@ -857,6 +857,7 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr) const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; u32 sr; unsigned int size; + irqreturn_t ret = IRQ_NONE; sr = readl_relaxed(port->membase + ofs->isr); @@ -865,11 +866,14 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr) (sr & USART_SR_TC)) { stm32_usart_tc_interrupt_disable(port); stm32_usart_rs485_rts_disable(port); + ret = IRQ_HANDLED; } - if ((sr & USART_SR_RTOF) && ofs->icr != UNDEF_REG) + if ((sr & USART_SR_RTOF) && ofs->icr != UNDEF_REG) { writel_relaxed(USART_ICR_RTOCF, port->membase + ofs->icr); + ret = IRQ_HANDLED; + } if ((sr & USART_SR_WUF) && ofs->icr != UNDEF_REG) { /* Clear wake up flag and disable wake up interrupt */ @@ -878,6 +882,7 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr) stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_WUFIE); if (irqd_is_wakeup_set(irq_get_irq_data(port->irq))) pm_wakeup_event(tport->tty->dev, 0); + ret = IRQ_HANDLED; } /* @@ -892,6 +897,7 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr) uart_unlock_and_check_sysrq(port); if (size) tty_flip_buffer_push(tport); + ret = IRQ_HANDLED; } } @@ -899,6 +905,7 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr) uart_port_lock(port); stm32_usart_transmit_chars(port); uart_port_unlock(port); + ret = IRQ_HANDLED; } /* Receiver timeout irq for DMA RX */ @@ -908,9 +915,10 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr) uart_unlock_and_check_sysrq(port); if (size) tty_flip_buffer_push(tport); + ret = IRQ_HANDLED; } - return IRQ_HANDLED; + return ret; } static void stm32_usart_set_mctrl(struct uart_port *port, unsigned int mctrl) @@ -1080,6 +1088,7 @@ static int stm32_usart_startup(struct uart_port *port) val |= USART_CR2_SWAP; writel_relaxed(val, port->membase + ofs->cr2); } + stm32_port->throttled = false; /* RX FIFO Flush */ if (ofs->rqr != UNDEF_REG) @@ -1820,7 +1829,7 @@ err_dma_rx: return ret; } -static int stm32_usart_serial_remove(struct platform_device *pdev) +static void stm32_usart_serial_remove(struct platform_device *pdev) { struct uart_port *port = platform_get_drvdata(pdev); struct stm32_port *stm32_port = to_stm32_port(port); @@ -1859,8 +1868,6 @@ static int stm32_usart_serial_remove(struct platform_device *pdev) } stm32_usart_deinit_port(stm32_port); - - return 0; } static void __maybe_unused stm32_usart_console_putchar(struct uart_port *port, unsigned char ch) @@ -2144,7 +2151,7 @@ static const struct dev_pm_ops stm32_serial_pm_ops = { static struct platform_driver stm32_serial_driver = { .probe = stm32_usart_serial_probe, - .remove = stm32_usart_serial_remove, + .remove_new = stm32_usart_serial_remove, .driver = { .name = DRIVER_NAME, .pm = &stm32_serial_pm_ops, diff --git a/drivers/tty/serial/sunhv.c b/drivers/tty/serial/sunhv.c index 5bfc0040f1..8d612ab806 100644 --- a/drivers/tty/serial/sunhv.c +++ b/drivers/tty/serial/sunhv.c @@ -595,7 +595,7 @@ out_free_port: return err; } -static int hv_remove(struct platform_device *dev) +static void hv_remove(struct platform_device *dev) { struct uart_port *port = platform_get_drvdata(dev); @@ -608,8 +608,6 @@ static int hv_remove(struct platform_device *dev) kfree(con_write_page); kfree(port); sunhv_port = NULL; - - return 0; } static const struct of_device_id hv_match[] = { @@ -630,7 +628,7 @@ static struct platform_driver hv_driver = { .of_match_table = hv_match, }, .probe = hv_probe, - .remove = hv_remove, + .remove_new = hv_remove, }; static int __init sunhv_init(void) diff --git a/drivers/tty/serial/sunplus-uart.c b/drivers/tty/serial/sunplus-uart.c index 4251f4e1ba..99f5285819 100644 --- a/drivers/tty/serial/sunplus-uart.c +++ b/drivers/tty/serial/sunplus-uart.c @@ -662,13 +662,11 @@ static int sunplus_uart_probe(struct platform_device *pdev) return ret; } -static int sunplus_uart_remove(struct platform_device *pdev) +static void sunplus_uart_remove(struct platform_device *pdev) { struct sunplus_uart_port *sup = platform_get_drvdata(pdev); uart_remove_one_port(&sunplus_uart_driver, &sup->port); - - return 0; } static int __maybe_unused sunplus_uart_suspend(struct device *dev) @@ -703,7 +701,7 @@ MODULE_DEVICE_TABLE(of, sp_uart_of_match); static struct platform_driver sunplus_uart_platform_driver = { .probe = sunplus_uart_probe, - .remove = sunplus_uart_remove, + .remove_new = sunplus_uart_remove, .driver = { .name = "sunplus_uart", .of_match_table = sp_uart_of_match, diff --git a/drivers/tty/serial/sunsab.c b/drivers/tty/serial/sunsab.c index 6aa51a6f80..1ea2f33a07 100644 --- a/drivers/tty/serial/sunsab.c +++ b/drivers/tty/serial/sunsab.c @@ -443,7 +443,7 @@ static void sunsab_start_tx(struct uart_port *port) up->interrupt_mask1 &= ~(SAB82532_IMR1_ALLS|SAB82532_IMR1_XPR); writeb(up->interrupt_mask1, &up->regs->w.imr1); - + if (!test_bit(SAB82532_XPR, &up->irqflags)) return; @@ -549,7 +549,7 @@ static int sunsab_startup(struct uart_port *port) (void) readb(&up->regs->r.isr1); /* - * Now, initialize the UART + * Now, initialize the UART */ writeb(0, &up->regs->w.ccr0); /* power-down */ writeb(SAB82532_CCR0_MCE | SAB82532_CCR0_SC_NRZ | @@ -563,7 +563,7 @@ static int sunsab_startup(struct uart_port *port) SAB82532_MODE_RAC); writeb(up->cached_mode, &up->regs->w.mode); writeb(SAB82532_RFC_DPS|SAB82532_RFC_RFTH_32, &up->regs->w.rfc); - + tmp = readb(&up->regs->rw.ccr0); tmp |= SAB82532_CCR0_PU; /* power-up */ writeb(tmp, &up->regs->rw.ccr0); @@ -607,7 +607,7 @@ static void sunsab_shutdown(struct uart_port *port) up->cached_dafo &= ~SAB82532_DAFO_XBRK; writeb(up->cached_dafo, &up->regs->rw.dafo); - /* Disable Receiver */ + /* Disable Receiver */ up->cached_mode &= ~SAB82532_MODE_RAC; writeb(up->cached_mode, &up->regs->rw.mode); @@ -622,7 +622,7 @@ static void sunsab_shutdown(struct uart_port *port) * speed the chip was configured for when the port was open). */ #if 0 - /* Power Down */ + /* Power Down */ tmp = readb(&up->regs->rw.ccr0); tmp &= ~SAB82532_CCR0_PU; writeb(tmp, &up->regs->rw.ccr0); @@ -649,7 +649,7 @@ static void calc_ebrg(int baud, int *n_ret, int *m_ret) *m_ret = 0; return; } - + /* * We scale numbers by 10 so that we get better accuracy * without having to use floating point. Here we increment m @@ -788,7 +788,7 @@ static const char *sunsab_type(struct uart_port *port) { struct uart_sunsab_port *up = (void *)port; static char buf[36]; - + sprintf(buf, "SAB82532 %s", sab82532_version[up->type]); return buf; } @@ -933,7 +933,7 @@ static int sunsab_console_setup(struct console *con, char *options) sunsab_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS); uart_port_unlock_irqrestore(&up->port, flags); - + return 0; } @@ -1066,7 +1066,7 @@ out: return err; } -static int sab_remove(struct platform_device *op) +static void sab_remove(struct platform_device *op) { struct uart_sunsab_port *up = platform_get_drvdata(op); @@ -1078,8 +1078,6 @@ static int sab_remove(struct platform_device *op) of_iounmap(&op->resource[0], up[0].port.membase, sizeof(union sab82532_async_regs)); - - return 0; } static const struct of_device_id sab_match[] = { @@ -1100,7 +1098,7 @@ static struct platform_driver sab_driver = { .of_match_table = sab_match, }, .probe = sab_probe, - .remove = sab_remove, + .remove_new = sab_remove, }; static int __init sunsab_init(void) diff --git a/drivers/tty/serial/sunsu.c b/drivers/tty/serial/sunsu.c index 1e051cc259..c8b65f4b27 100644 --- a/drivers/tty/serial/sunsu.c +++ b/drivers/tty/serial/sunsu.c @@ -1515,7 +1515,7 @@ out_unmap: return err; } -static int su_remove(struct platform_device *op) +static void su_remove(struct platform_device *op) { struct uart_sunsu_port *up = platform_get_drvdata(op); bool kbdms = false; @@ -1536,8 +1536,6 @@ static int su_remove(struct platform_device *op) if (kbdms) kfree(up); - - return 0; } static const struct of_device_id su_match[] = { @@ -1565,7 +1563,7 @@ static struct platform_driver su_driver = { .of_match_table = su_match, }, .probe = su_probe, - .remove = su_remove, + .remove_new = su_remove, }; static int __init sunsu_init(void) diff --git a/drivers/tty/serial/sunzilog.c b/drivers/tty/serial/sunzilog.c index d3b5e864b7..c99289c6c8 100644 --- a/drivers/tty/serial/sunzilog.c +++ b/drivers/tty/serial/sunzilog.c @@ -1513,7 +1513,7 @@ static void zs_remove_one(struct uart_sunzilog_port *up) uart_remove_one_port(&sunzilog_reg, &up->port); } -static int zs_remove(struct platform_device *op) +static void zs_remove(struct platform_device *op) { struct uart_sunzilog_port *up = platform_get_drvdata(op); struct zilog_layout __iomem *regs; @@ -1523,8 +1523,6 @@ static int zs_remove(struct platform_device *op) regs = sunzilog_chip_regs[up[0].port.line / 2]; of_iounmap(&op->resource[0], regs, sizeof(struct zilog_layout)); - - return 0; } static const struct of_device_id zs_match[] = { @@ -1541,7 +1539,7 @@ static struct platform_driver zs_driver = { .of_match_table = zs_match, }, .probe = zs_probe, - .remove = zs_remove, + .remove_new = zs_remove, }; static int __init sunzilog_init(void) diff --git a/drivers/tty/serial/tegra-tcu.c b/drivers/tty/serial/tegra-tcu.c index 65069daf36..d9c78320eb 100644 --- a/drivers/tty/serial/tegra-tcu.c +++ b/drivers/tty/serial/tegra-tcu.c @@ -266,7 +266,7 @@ free_tx: return err; } -static int tegra_tcu_remove(struct platform_device *pdev) +static void tegra_tcu_remove(struct platform_device *pdev) { struct tegra_tcu *tcu = platform_get_drvdata(pdev); @@ -277,8 +277,6 @@ static int tegra_tcu_remove(struct platform_device *pdev) uart_remove_one_port(&tcu->driver, &tcu->port); uart_unregister_driver(&tcu->driver); mbox_free_channel(tcu->tx); - - return 0; } static const struct of_device_id tegra_tcu_match[] = { @@ -293,7 +291,7 @@ static struct platform_driver tegra_tcu_driver = { .of_match_table = tegra_tcu_match, }, .probe = tegra_tcu_probe, - .remove = tegra_tcu_remove, + .remove_new = tegra_tcu_remove, }; module_platform_driver(tegra_tcu_driver); diff --git a/drivers/tty/serial/timbuart.c b/drivers/tty/serial/timbuart.c index 0cc6524f5e..4bc89a9b38 100644 --- a/drivers/tty/serial/timbuart.c +++ b/drivers/tty/serial/timbuart.c @@ -473,7 +473,7 @@ err_mem: return err; } -static int timbuart_remove(struct platform_device *dev) +static void timbuart_remove(struct platform_device *dev) { struct timbuart_port *uart = platform_get_drvdata(dev); @@ -481,8 +481,6 @@ static int timbuart_remove(struct platform_device *dev) uart_remove_one_port(&timbuart_driver, &uart->port); uart_unregister_driver(&timbuart_driver); kfree(uart); - - return 0; } static struct platform_driver timbuart_platform_driver = { @@ -490,7 +488,7 @@ static struct platform_driver timbuart_platform_driver = { .name = "timb-uart", }, .probe = timbuart_probe, - .remove = timbuart_remove, + .remove_new = timbuart_remove, }; module_platform_driver(timbuart_platform_driver); diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c index 404c14acaf..10ba41b7be 100644 --- a/drivers/tty/serial/uartlite.c +++ b/drivers/tty/serial/uartlite.c @@ -24,8 +24,13 @@ #include #define ULITE_NAME "ttyUL" +#if CONFIG_SERIAL_UARTLITE_NR_UARTS > 4 +#define ULITE_MAJOR 0 /* use dynamic node allocation */ +#define ULITE_MINOR 0 +#else #define ULITE_MAJOR 204 #define ULITE_MINOR 187 +#endif #define ULITE_NR_UARTS CONFIG_SERIAL_UARTLITE_NR_UARTS /* --------------------------------------------------------------------- @@ -62,11 +67,11 @@ static struct uart_port *console_port; #endif /** - * struct uartlite_data: Driver private data - * reg_ops: Functions to read/write registers - * clk: Our parent clock, if present - * baud: The baud rate configured when this device was synthesized - * cflags: The cflags for parity and data bits + * struct uartlite_data - Driver private data + * @reg_ops: Functions to read/write registers + * @clk: Our parent clock, if present + * @baud: The baud rate configured when this device was synthesized + * @cflags: The cflags for parity and data bits */ struct uartlite_data { const struct uartlite_reg_ops *reg_ops; @@ -890,7 +895,7 @@ of_err: return ret; } -static int ulite_remove(struct platform_device *pdev) +static void ulite_remove(struct platform_device *pdev) { struct uart_port *port = dev_get_drvdata(&pdev->dev); struct uartlite_data *pdata = port->private_data; @@ -900,7 +905,6 @@ static int ulite_remove(struct platform_device *pdev) pm_runtime_disable(&pdev->dev); pm_runtime_set_suspended(&pdev->dev); pm_runtime_dont_use_autosuspend(&pdev->dev); - return 0; } /* work with hotplug and coldplug */ @@ -908,7 +912,7 @@ MODULE_ALIAS("platform:uartlite"); static struct platform_driver ulite_platform_driver = { .probe = ulite_probe, - .remove = ulite_remove, + .remove_new = ulite_remove, .driver = { .name = "uartlite", .of_match_table = of_match_ptr(ulite_of_match), diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c index ed7a6bb559..397b95dff7 100644 --- a/drivers/tty/serial/ucc_uart.c +++ b/drivers/tty/serial/ucc_uart.c @@ -189,10 +189,10 @@ struct uart_qe_port { u16 tx_fifosize; int wait_closing; u32 flags; - struct qe_bd *rx_bd_base; - struct qe_bd *rx_cur; - struct qe_bd *tx_bd_base; - struct qe_bd *tx_cur; + struct qe_bd __iomem *rx_bd_base; + struct qe_bd __iomem *rx_cur; + struct qe_bd __iomem *tx_bd_base; + struct qe_bd __iomem *tx_cur; unsigned char *tx_buf; unsigned char *rx_buf; void *bd_virt; /* virtual address of the BD buffers */ @@ -258,7 +258,7 @@ static unsigned int qe_uart_tx_empty(struct uart_port *port) { struct uart_qe_port *qe_port = container_of(port, struct uart_qe_port, port); - struct qe_bd *bdp = qe_port->tx_bd_base; + struct qe_bd __iomem *bdp = qe_port->tx_bd_base; while (1) { if (ioread16be(&bdp->status) & BD_SC_READY) @@ -330,7 +330,7 @@ static void qe_uart_stop_tx(struct uart_port *port) */ static int qe_uart_tx_pump(struct uart_qe_port *qe_port) { - struct qe_bd *bdp; + struct qe_bd __iomem *bdp; unsigned char *p; unsigned int count; struct uart_port *port = &qe_port->port; @@ -341,7 +341,7 @@ static int qe_uart_tx_pump(struct uart_qe_port *qe_port) /* Pick next descriptor and fill from buffer */ bdp = qe_port->tx_cur; - p = qe2cpu_addr(be32_to_cpu(bdp->buf), qe_port); + p = qe2cpu_addr(ioread32be(&bdp->buf), qe_port); *p++ = port->x_char; iowrite16be(1, &bdp->length); @@ -368,7 +368,7 @@ static int qe_uart_tx_pump(struct uart_qe_port *qe_port) while (!(ioread16be(&bdp->status) & BD_SC_READY) && !uart_circ_empty(xmit)) { count = 0; - p = qe2cpu_addr(be32_to_cpu(bdp->buf), qe_port); + p = qe2cpu_addr(ioread32be(&bdp->buf), qe_port); while (count < qe_port->tx_fifosize) { *p++ = xmit->buf[xmit->tail]; uart_xmit_advance(port, 1); @@ -460,7 +460,7 @@ static void qe_uart_int_rx(struct uart_qe_port *qe_port) unsigned char ch, *cp; struct uart_port *port = &qe_port->port; struct tty_port *tport = &port->state->port; - struct qe_bd *bdp; + struct qe_bd __iomem *bdp; u16 status; unsigned int flg; @@ -487,7 +487,7 @@ static void qe_uart_int_rx(struct uart_qe_port *qe_port) } /* get pointer */ - cp = qe2cpu_addr(be32_to_cpu(bdp->buf), qe_port); + cp = qe2cpu_addr(ioread32be(&bdp->buf), qe_port); /* loop through the buffer */ while (i-- > 0) { @@ -590,7 +590,7 @@ static void qe_uart_initbd(struct uart_qe_port *qe_port) { int i; void *bd_virt; - struct qe_bd *bdp; + struct qe_bd __iomem *bdp; /* Set the physical address of the host memory buffers in the buffer * descriptors, and the virtual address for us to work with. @@ -648,7 +648,7 @@ static void qe_uart_init_ucc(struct uart_qe_port *qe_port) { u32 cecr_subblock; struct ucc_slow __iomem *uccp = qe_port->uccp; - struct ucc_uart_pram *uccup = qe_port->uccup; + struct ucc_uart_pram __iomem *uccup = qe_port->uccup; unsigned int i; @@ -983,7 +983,7 @@ static int qe_uart_request_port(struct uart_port *port) qe_port->us_private = uccs; qe_port->uccp = uccs->us_regs; - qe_port->uccup = (struct ucc_uart_pram *) uccs->us_pram; + qe_port->uccup = (struct ucc_uart_pram __iomem *)uccs->us_pram; qe_port->rx_bd_base = uccs->rx_bd; qe_port->tx_bd_base = uccs->tx_bd; @@ -1156,7 +1156,7 @@ static void uart_firmware_cont(const struct firmware *fw, void *context) firmware = (struct qe_firmware *) fw->data; - if (firmware->header.length != fw->size) { + if (be32_to_cpu(firmware->header.length) != fw->size) { dev_err(dev, "invalid firmware\n"); goto out; } @@ -1459,7 +1459,7 @@ out_free: return ret; } -static int ucc_uart_remove(struct platform_device *ofdev) +static void ucc_uart_remove(struct platform_device *ofdev) { struct uart_qe_port *qe_port = platform_get_drvdata(ofdev); @@ -1470,8 +1470,6 @@ static int ucc_uart_remove(struct platform_device *ofdev) of_node_put(qe_port->np); kfree(qe_port); - - return 0; } static const struct of_device_id ucc_uart_match[] = { @@ -1492,7 +1490,7 @@ static struct platform_driver ucc_uart_of_driver = { .of_match_table = ucc_uart_match, }, .probe = ucc_uart_probe, - .remove = ucc_uart_remove, + .remove_new = ucc_uart_remove, }; static int __init ucc_uart_init(void) diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c index 66a45a6341..920762d7b4 100644 --- a/drivers/tty/serial/xilinx_uartps.c +++ b/drivers/tty/serial/xilinx_uartps.c @@ -1663,10 +1663,8 @@ err_out_unregister_driver: /** * cdns_uart_remove - called when the platform driver is unregistered * @pdev: Pointer to the platform device structure - * - * Return: 0 on success, negative errno otherwise */ -static int cdns_uart_remove(struct platform_device *pdev) +static void cdns_uart_remove(struct platform_device *pdev) { struct uart_port *port = platform_get_drvdata(pdev); struct cdns_uart *cdns_uart_data = port->private_data; @@ -1692,12 +1690,11 @@ static int cdns_uart_remove(struct platform_device *pdev) if (!--instances) uart_unregister_driver(cdns_uart_data->cdns_uart_driver); - return 0; } static struct platform_driver cdns_uart_platform_driver = { .probe = cdns_uart_probe, - .remove = cdns_uart_remove, + .remove_new = cdns_uart_remove, .driver = { .name = CDNS_UART_NAME, .of_match_table = cdns_uart_of_match, -- cgit v1.2.3