From a1865fbd182b17f2d2f465f557af5b45501c5f1c Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 18 May 2024 20:47:48 +0200 Subject: Adding upstream version 6.7.12. Signed-off-by: Daniel Baumann --- drivers/tty/serial/8250/8250_exar.c | 5 +---- drivers/tty/serial/8250/8250_port.c | 6 ------ drivers/tty/serial/fsl_lpuart.c | 7 +++++-- drivers/tty/serial/imx.c | 22 ++++++++++++++++++---- drivers/tty/serial/max310x.c | 9 ++++++--- drivers/tty/serial/qcom_geni_serial.c | 10 ++++++---- drivers/tty/serial/samsung_tty.c | 5 ++--- drivers/tty/serial/serial_core.c | 12 ++++++++++++ drivers/tty/serial/serial_port.c | 25 ++++++++++++++++++++++++- drivers/tty/vt/vt.c | 4 ++-- 10 files changed, 76 insertions(+), 29 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c index 23366f868a..dab94835b6 100644 --- a/drivers/tty/serial/8250/8250_exar.c +++ b/drivers/tty/serial/8250/8250_exar.c @@ -753,6 +753,7 @@ static void exar_pci_remove(struct pci_dev *pcidev) for (i = 0; i < priv->nr; i++) serial8250_unregister_port(priv->line[i]); + /* Ensure that every init quirk is properly torn down */ if (priv->board->exit) priv->board->exit(pcidev); } @@ -767,10 +768,6 @@ static int __maybe_unused exar_suspend(struct device *dev) if (priv->line[i] >= 0) serial8250_suspend_port(priv->line[i]); - /* Ensure that every init quirk is properly torn down */ - if (priv->board->exit) - priv->board->exit(pcidev); - return 0; } diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 8ca061d3bb..1d65055dde 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -1329,9 +1329,6 @@ static void autoconfig_irq(struct uart_8250_port *up) inb_p(ICP); } - if (uart_console(port)) - console_lock(); - /* forget possible initially masked and pending IRQ */ probe_irq_off(probe_irq_on()); save_mcr = serial8250_in_MCR(up); @@ -1371,9 +1368,6 @@ static void autoconfig_irq(struct uart_8250_port *up) if (port->flags & UPF_FOURPORT) outb_p(save_ICP, ICP); - if (uart_console(port)) - console_unlock(); - port->irq = (irq > 0) ? irq : 0; } diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index 6d0cfb2e86..71d0cbd748 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -2345,9 +2345,12 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios, lpuart32_write(&sport->port, bd, UARTBAUD); lpuart32_serial_setbrg(sport, baud); - lpuart32_write(&sport->port, modem, UARTMODIR); - lpuart32_write(&sport->port, ctrl, UARTCTRL); + /* disable CTS before enabling UARTCTRL_TE to avoid pending idle preamble */ + lpuart32_write(&sport->port, modem & ~UARTMODIR_TXCTSE, UARTMODIR); /* restore control register */ + lpuart32_write(&sport->port, ctrl, UARTCTRL); + /* re-enable the CTS if needed */ + lpuart32_write(&sport->port, modem, UARTMODIR); if ((ctrl & (UARTCTRL_PE | UARTCTRL_M)) == UARTCTRL_PE) sport->is_cs7 = true; diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 81557a58f8..5545bf4a79 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -462,8 +462,7 @@ static void imx_uart_stop_tx(struct uart_port *port) } } -/* called with port.lock taken and irqs off */ -static void imx_uart_stop_rx(struct uart_port *port) +static void imx_uart_stop_rx_with_loopback_ctrl(struct uart_port *port, bool loopback) { struct imx_port *sport = (struct imx_port *)port; u32 ucr1, ucr2, ucr4, uts; @@ -485,7 +484,7 @@ static void imx_uart_stop_rx(struct uart_port *port) /* See SER_RS485_ENABLED/UTS_LOOP comment in imx_uart_probe() */ if (port->rs485.flags & SER_RS485_ENABLED && port->rs485.flags & SER_RS485_RTS_ON_SEND && - sport->have_rtscts && !sport->have_rtsgpio) { + sport->have_rtscts && !sport->have_rtsgpio && loopback) { uts = imx_uart_readl(sport, imx_uart_uts_reg(sport)); uts |= UTS_LOOP; imx_uart_writel(sport, uts, imx_uart_uts_reg(sport)); @@ -497,6 +496,16 @@ static void imx_uart_stop_rx(struct uart_port *port) imx_uart_writel(sport, ucr2, UCR2); } +/* called with port.lock taken and irqs off */ +static void imx_uart_stop_rx(struct uart_port *port) +{ + /* + * Stop RX and enable loopback in order to make sure RS485 bus + * is not blocked. Se comment in imx_uart_probe(). + */ + imx_uart_stop_rx_with_loopback_ctrl(port, true); +} + /* called with port.lock taken and irqs off */ static void imx_uart_enable_ms(struct uart_port *port) { @@ -682,9 +691,14 @@ static void imx_uart_start_tx(struct uart_port *port) imx_uart_rts_inactive(sport, &ucr2); imx_uart_writel(sport, ucr2, UCR2); + /* + * Since we are about to transmit we can not stop RX + * with loopback enabled because that will make our + * transmitted data being just looped to RX. + */ if (!(port->rs485.flags & SER_RS485_RX_DURING_TX) && !port->rs485_rx_during_tx_gpio) - imx_uart_stop_rx(port); + imx_uart_stop_rx_with_loopback_ctrl(port, false); sport->tx_state = WAIT_AFTER_RTS; diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c index 07f7b48bad..1a4bb55652 100644 --- a/drivers/tty/serial/max310x.c +++ b/drivers/tty/serial/max310x.c @@ -1461,7 +1461,7 @@ static int max310x_probe(struct device *dev, const struct max310x_devtype *devty if (!ret) return 0; - dev_err(dev, "Unable to reguest IRQ %i\n", irq); + dev_err(dev, "Unable to request IRQ %i\n", irq); out_uart: for (i = 0; i < devtype->nr; i++) { @@ -1635,13 +1635,16 @@ static unsigned short max310x_i2c_slave_addr(unsigned short addr, static int max310x_i2c_probe(struct i2c_client *client) { - const struct max310x_devtype *devtype = - device_get_match_data(&client->dev); + const struct max310x_devtype *devtype; struct i2c_client *port_client; struct regmap *regmaps[4]; unsigned int i; u8 port_addr; + devtype = device_get_match_data(&client->dev); + if (!devtype) + return dev_err_probe(&client->dev, -ENODEV, "Failed to match device\n"); + if (client->addr < devtype->slave_addr.min || client->addr > devtype->slave_addr.max) return dev_err_probe(&client->dev, -EINVAL, diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index 7e78f97e8f..5499096440 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -851,19 +851,21 @@ static void qcom_geni_serial_stop_tx(struct uart_port *uport) } static void qcom_geni_serial_send_chunk_fifo(struct uart_port *uport, - unsigned int remaining) + unsigned int chunk) { struct qcom_geni_serial_port *port = to_dev_port(uport); struct circ_buf *xmit = &uport->state->xmit; - unsigned int tx_bytes; + unsigned int tx_bytes, c, remaining = chunk; u8 buf[BYTES_PER_FIFO_WORD]; while (remaining) { memset(buf, 0, sizeof(buf)); tx_bytes = min(remaining, BYTES_PER_FIFO_WORD); - memcpy(buf, &xmit->buf[xmit->tail], tx_bytes); - uart_xmit_advance(uport, tx_bytes); + for (c = 0; c < tx_bytes ; c++) { + buf[c] = xmit->buf[xmit->tail]; + uart_xmit_advance(uport, 1); + } iowrite32_rep(uport->membase + SE_GENI_TX_FIFOn, buf, 1); diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c index 3bd552841c..06d140c9f5 100644 --- a/drivers/tty/serial/samsung_tty.c +++ b/drivers/tty/serial/samsung_tty.c @@ -987,11 +987,10 @@ static unsigned int s3c24xx_serial_tx_empty(struct uart_port *port) if ((ufstat & info->tx_fifomask) != 0 || (ufstat & info->tx_fifofull)) return 0; - - return 1; + return TIOCSER_TEMT; } - return s3c24xx_serial_txempty_nofifo(port); + return s3c24xx_serial_txempty_nofifo(port) ? TIOCSER_TEMT : 0; } /* no modem control lines */ diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 39fa9ae509..e383d9a10a 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -2603,7 +2603,12 @@ uart_configure_port(struct uart_driver *drv, struct uart_state *state, port->type = PORT_UNKNOWN; flags |= UART_CONFIG_TYPE; } + /* Synchronize with possible boot console. */ + if (uart_console(port)) + console_lock(); port->ops->config_port(port, flags); + if (uart_console(port)) + console_unlock(); } if (port->type != PORT_UNKNOWN) { @@ -2611,6 +2616,10 @@ uart_configure_port(struct uart_driver *drv, struct uart_state *state, uart_report_port(drv, port); + /* Synchronize with possible boot console. */ + if (uart_console(port)) + console_lock(); + /* Power up port for set_mctrl() */ uart_change_pm(state, UART_PM_STATE_ON); @@ -2627,6 +2636,9 @@ uart_configure_port(struct uart_driver *drv, struct uart_state *state, uart_rs485_config(port); + if (uart_console(port)) + console_unlock(); + /* * If this driver supports console, and it hasn't been * successfully registered yet, try to re-register it. diff --git a/drivers/tty/serial/serial_port.c b/drivers/tty/serial/serial_port.c index 88975a4df3..72b6f4f326 100644 --- a/drivers/tty/serial/serial_port.c +++ b/drivers/tty/serial/serial_port.c @@ -46,8 +46,31 @@ out: return 0; } +static int serial_port_runtime_suspend(struct device *dev) +{ + struct serial_port_device *port_dev = to_serial_base_port_device(dev); + struct uart_port *port = port_dev->port; + unsigned long flags; + bool busy; + + if (port->flags & UPF_DEAD) + return 0; + + uart_port_lock_irqsave(port, &flags); + busy = __serial_port_busy(port); + if (busy) + port->ops->start_tx(port); + uart_port_unlock_irqrestore(port, flags); + + if (busy) + pm_runtime_mark_last_busy(dev); + + return busy ? -EBUSY : 0; +} + static DEFINE_RUNTIME_DEV_PM_OPS(serial_port_pm, - NULL, serial_port_runtime_resume, NULL); + serial_port_runtime_suspend, + serial_port_runtime_resume, NULL); static int serial_port_probe(struct device *dev) { diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index 156efda7c8..52e6ca1ba2 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -381,7 +381,7 @@ static void vc_uniscr_delete(struct vc_data *vc, unsigned int nr) u32 *ln = vc->vc_uni_lines[vc->state.y]; unsigned int x = vc->state.x, cols = vc->vc_cols; - memcpy(&ln[x], &ln[x + nr], (cols - x - nr) * sizeof(*ln)); + memmove(&ln[x], &ln[x + nr], (cols - x - nr) * sizeof(*ln)); memset32(&ln[cols - nr], ' ', nr); } } @@ -2469,7 +2469,7 @@ static void do_con_trol(struct tty_struct *tty, struct vc_data *vc, int c) } return; case EScsiignore: - if (c >= 20 && c <= 0x3f) + if (c >= 0x20 && c <= 0x3f) return; vc->vc_state = ESnormal; return; -- cgit v1.2.3