From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- drivers/usb/chipidea/host.c | 502 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 502 insertions(+) create mode 100644 drivers/usb/chipidea/host.c (limited to 'drivers/usb/chipidea/host.c') diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c new file mode 100644 index 0000000000..0cce192083 --- /dev/null +++ b/drivers/usb/chipidea/host.c @@ -0,0 +1,502 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * host.c - ChipIdea USB host controller driver + * + * Copyright (c) 2012 Intel Corporation + * + * Author: Alexander Shishkin + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "../host/ehci.h" + +#include "ci.h" +#include "bits.h" +#include "host.h" + +static struct hc_driver __read_mostly ci_ehci_hc_driver; +static int (*orig_bus_suspend)(struct usb_hcd *hcd); + +struct ehci_ci_priv { + struct regulator *reg_vbus; + bool enabled; +}; + +struct ci_hdrc_dma_aligned_buffer { + void *original_buffer; + u8 data[]; +}; + +static int ehci_ci_portpower(struct usb_hcd *hcd, int portnum, bool enable) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + struct ehci_ci_priv *priv = (struct ehci_ci_priv *)ehci->priv; + struct device *dev = hcd->self.controller; + struct ci_hdrc *ci = dev_get_drvdata(dev); + int ret = 0; + int port = HCS_N_PORTS(ehci->hcs_params); + + if (priv->reg_vbus && enable != priv->enabled) { + if (port > 1) { + dev_warn(dev, + "Not support multi-port regulator control\n"); + return 0; + } + if (enable) + ret = regulator_enable(priv->reg_vbus); + else + ret = regulator_disable(priv->reg_vbus); + if (ret) { + dev_err(dev, + "Failed to %s vbus regulator, ret=%d\n", + enable ? "enable" : "disable", ret); + return ret; + } + priv->enabled = enable; + } + + if (ci->platdata->flags & CI_HDRC_PHY_VBUS_CONTROL) { + if (enable) + usb_phy_vbus_on(ci->usb_phy); + else + usb_phy_vbus_off(ci->usb_phy); + } + + if (enable && (ci->platdata->phy_mode == USBPHY_INTERFACE_MODE_HSIC)) { + /* + * Marvell 28nm HSIC PHY requires forcing the port to HS mode. + * As HSIC is always HS, this should be safe for others. + */ + hw_port_test_set(ci, 5); + hw_port_test_set(ci, 0); + } + return 0; +}; + +static int ehci_ci_reset(struct usb_hcd *hcd) +{ + struct device *dev = hcd->self.controller; + struct ci_hdrc *ci = dev_get_drvdata(dev); + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + int ret; + + ret = ehci_setup(hcd); + if (ret) + return ret; + + ehci->need_io_watchdog = 0; + + if (ci->platdata->notify_event) { + ret = ci->platdata->notify_event(ci, + CI_HDRC_CONTROLLER_RESET_EVENT); + if (ret) + return ret; + } + + ci_platform_configure(ci); + + return ret; +} + +static const struct ehci_driver_overrides ehci_ci_overrides = { + .extra_priv_size = sizeof(struct ehci_ci_priv), + .port_power = ehci_ci_portpower, + .reset = ehci_ci_reset, +}; + +static irqreturn_t host_irq(struct ci_hdrc *ci) +{ + return usb_hcd_irq(ci->irq, ci->hcd); +} + +static int host_start(struct ci_hdrc *ci) +{ + struct usb_hcd *hcd; + struct ehci_hcd *ehci; + struct ehci_ci_priv *priv; + int ret; + + if (usb_disabled()) + return -ENODEV; + + hcd = __usb_create_hcd(&ci_ehci_hc_driver, ci->dev->parent, + ci->dev, dev_name(ci->dev), NULL); + if (!hcd) + return -ENOMEM; + + dev_set_drvdata(ci->dev, ci); + hcd->rsrc_start = ci->hw_bank.phys; + hcd->rsrc_len = ci->hw_bank.size; + hcd->regs = ci->hw_bank.abs; + hcd->has_tt = 1; + + hcd->power_budget = ci->platdata->power_budget; + hcd->tpl_support = ci->platdata->tpl_support; + if (ci->phy || ci->usb_phy) { + hcd->skip_phy_initialization = 1; + if (ci->usb_phy) + hcd->usb_phy = ci->usb_phy; + } + + ehci = hcd_to_ehci(hcd); + ehci->caps = ci->hw_bank.cap; + ehci->has_hostpc = ci->hw_bank.lpm; + ehci->has_tdi_phy_lpm = ci->hw_bank.lpm; + ehci->imx28_write_fix = ci->imx28_write_fix; + ehci->has_ci_pec_bug = ci->has_portsc_pec_bug; + + priv = (struct ehci_ci_priv *)ehci->priv; + priv->reg_vbus = NULL; + + if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci)) { + if (ci->platdata->flags & CI_HDRC_TURN_VBUS_EARLY_ON) { + ret = regulator_enable(ci->platdata->reg_vbus); + if (ret) { + dev_err(ci->dev, + "Failed to enable vbus regulator, ret=%d\n", + ret); + goto put_hcd; + } + } else { + priv->reg_vbus = ci->platdata->reg_vbus; + } + } + + if (ci->platdata->pins_host) + pinctrl_select_state(ci->platdata->pctl, + ci->platdata->pins_host); + + ci->hcd = hcd; + + ret = usb_add_hcd(hcd, 0, 0); + if (ret) { + ci->hcd = NULL; + goto disable_reg; + } else { + struct usb_otg *otg = &ci->otg; + + if (ci_otg_is_fsm_mode(ci)) { + otg->host = &hcd->self; + hcd->self.otg_port = 1; + } + + if (ci->platdata->notify_event && + (ci->platdata->flags & CI_HDRC_IMX_IS_HSIC)) + ci->platdata->notify_event + (ci, CI_HDRC_IMX_HSIC_ACTIVE_EVENT); + } + + return ret; + +disable_reg: + if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci) && + (ci->platdata->flags & CI_HDRC_TURN_VBUS_EARLY_ON)) + regulator_disable(ci->platdata->reg_vbus); +put_hcd: + usb_put_hcd(hcd); + + return ret; +} + +static void host_stop(struct ci_hdrc *ci) +{ + struct usb_hcd *hcd = ci->hcd; + + if (hcd) { + if (ci->platdata->notify_event) + ci->platdata->notify_event(ci, + CI_HDRC_CONTROLLER_STOPPED_EVENT); + usb_remove_hcd(hcd); + ci->role = CI_ROLE_END; + synchronize_irq(ci->irq); + usb_put_hcd(hcd); + if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci) && + (ci->platdata->flags & CI_HDRC_TURN_VBUS_EARLY_ON)) + regulator_disable(ci->platdata->reg_vbus); + } + ci->hcd = NULL; + ci->otg.host = NULL; + + if (ci->platdata->pins_host && ci->platdata->pins_default) + pinctrl_select_state(ci->platdata->pctl, + ci->platdata->pins_default); +} + + +void ci_hdrc_host_destroy(struct ci_hdrc *ci) +{ + if (ci->role == CI_ROLE_HOST && ci->hcd) + host_stop(ci); +} + +/* The below code is based on tegra ehci driver */ +static int ci_ehci_hub_control( + struct usb_hcd *hcd, + u16 typeReq, + u16 wValue, + u16 wIndex, + char *buf, + u16 wLength +) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + unsigned int ports = HCS_N_PORTS(ehci->hcs_params); + u32 __iomem *status_reg; + u32 temp, port_index; + unsigned long flags; + int retval = 0; + bool done = false; + struct device *dev = hcd->self.controller; + struct ci_hdrc *ci = dev_get_drvdata(dev); + + port_index = wIndex & 0xff; + port_index -= (port_index > 0); + status_reg = &ehci->regs->port_status[port_index]; + + spin_lock_irqsave(&ehci->lock, flags); + + if (ci->platdata->hub_control) { + retval = ci->platdata->hub_control(ci, typeReq, wValue, wIndex, + buf, wLength, &done, &flags); + if (done) + goto done; + } + + if (typeReq == SetPortFeature && wValue == USB_PORT_FEAT_SUSPEND) { + if (!wIndex || wIndex > ports) { + retval = -EPIPE; + goto done; + } + + temp = ehci_readl(ehci, status_reg); + if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) != 0) { + retval = -EPIPE; + goto done; + } + + temp &= ~(PORT_RWC_BITS | PORT_WKCONN_E); + temp |= PORT_WKDISC_E | PORT_WKOC_E; + ehci_writel(ehci, temp | PORT_SUSPEND, status_reg); + + /* + * If a transaction is in progress, there may be a delay in + * suspending the port. Poll until the port is suspended. + */ + if (ehci_handshake(ehci, status_reg, PORT_SUSPEND, + PORT_SUSPEND, 5000)) + ehci_err(ehci, "timeout waiting for SUSPEND\n"); + + if (ci->platdata->flags & CI_HDRC_IMX_IS_HSIC) { + if (ci->platdata->notify_event) + ci->platdata->notify_event(ci, + CI_HDRC_IMX_HSIC_SUSPEND_EVENT); + + temp = ehci_readl(ehci, status_reg); + temp &= ~(PORT_WKDISC_E | PORT_WKCONN_E); + ehci_writel(ehci, temp, status_reg); + } + + set_bit(port_index, &ehci->suspended_ports); + goto done; + } + + /* + * After resume has finished, it needs do some post resume + * operation for some SoCs. + */ + else if (typeReq == ClearPortFeature && + wValue == USB_PORT_FEAT_C_SUSPEND) { + /* Make sure the resume has finished, it should be finished */ + if (ehci_handshake(ehci, status_reg, PORT_RESUME, 0, 25000)) + ehci_err(ehci, "timeout waiting for resume\n"); + } + + spin_unlock_irqrestore(&ehci->lock, flags); + + /* Handle the hub control events here */ + return ehci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength); +done: + spin_unlock_irqrestore(&ehci->lock, flags); + return retval; +} +static int ci_ehci_bus_suspend(struct usb_hcd *hcd) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + struct device *dev = hcd->self.controller; + struct ci_hdrc *ci = dev_get_drvdata(dev); + int port; + u32 tmp; + + int ret = orig_bus_suspend(hcd); + + if (ret) + return ret; + + port = HCS_N_PORTS(ehci->hcs_params); + while (port--) { + u32 __iomem *reg = &ehci->regs->port_status[port]; + u32 portsc = ehci_readl(ehci, reg); + + if (portsc & PORT_CONNECT) { + /* + * For chipidea, the resume signal will be ended + * automatically, so for remote wakeup case, the + * usbcmd.rs may not be set before the resume has + * ended if other resume paths consumes too much + * time (~24ms), in that case, the SOF will not + * send out within 3ms after resume ends, then the + * high speed device will enter full speed mode. + */ + + tmp = ehci_readl(ehci, &ehci->regs->command); + tmp |= CMD_RUN; + ehci_writel(ehci, tmp, &ehci->regs->command); + /* + * It needs a short delay between set RS bit and PHCD. + */ + usleep_range(150, 200); + /* + * Need to clear WKCN and WKOC for imx HSIC, + * otherwise, there will be wakeup event. + */ + if (ci->platdata->flags & CI_HDRC_IMX_IS_HSIC) { + tmp = ehci_readl(ehci, reg); + tmp &= ~(PORT_WKDISC_E | PORT_WKCONN_E); + ehci_writel(ehci, tmp, reg); + } + + break; + } + } + + return 0; +} + +static void ci_hdrc_free_dma_aligned_buffer(struct urb *urb, bool copy_back) +{ + struct ci_hdrc_dma_aligned_buffer *temp; + + if (!(urb->transfer_flags & URB_ALIGNED_TEMP_BUFFER)) + return; + urb->transfer_flags &= ~URB_ALIGNED_TEMP_BUFFER; + + temp = container_of(urb->transfer_buffer, + struct ci_hdrc_dma_aligned_buffer, data); + urb->transfer_buffer = temp->original_buffer; + + if (copy_back && usb_urb_dir_in(urb)) { + size_t length; + + if (usb_pipeisoc(urb->pipe)) + length = urb->transfer_buffer_length; + else + length = urb->actual_length; + + memcpy(temp->original_buffer, temp->data, length); + } + + kfree(temp); +} + +static int ci_hdrc_alloc_dma_aligned_buffer(struct urb *urb, gfp_t mem_flags) +{ + struct ci_hdrc_dma_aligned_buffer *temp; + + if (urb->num_sgs || urb->sg || urb->transfer_buffer_length == 0) + return 0; + if (IS_ALIGNED((uintptr_t)urb->transfer_buffer, 4) + && IS_ALIGNED(urb->transfer_buffer_length, 4)) + return 0; + + temp = kmalloc(sizeof(*temp) + ALIGN(urb->transfer_buffer_length, 4), mem_flags); + if (!temp) + return -ENOMEM; + + if (usb_urb_dir_out(urb)) + memcpy(temp->data, urb->transfer_buffer, + urb->transfer_buffer_length); + + temp->original_buffer = urb->transfer_buffer; + urb->transfer_buffer = temp->data; + urb->transfer_flags |= URB_ALIGNED_TEMP_BUFFER; + + return 0; +} + +static int ci_hdrc_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, + gfp_t mem_flags) +{ + int ret; + + ret = ci_hdrc_alloc_dma_aligned_buffer(urb, mem_flags); + if (ret) + return ret; + + ret = usb_hcd_map_urb_for_dma(hcd, urb, mem_flags); + if (ret) + ci_hdrc_free_dma_aligned_buffer(urb, false); + + return ret; +} + +static void ci_hdrc_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb) +{ + usb_hcd_unmap_urb_for_dma(hcd, urb); + ci_hdrc_free_dma_aligned_buffer(urb, true); +} + +#ifdef CONFIG_PM_SLEEP +static void ci_hdrc_host_suspend(struct ci_hdrc *ci) +{ + ehci_suspend(ci->hcd, device_may_wakeup(ci->dev)); +} + +static void ci_hdrc_host_resume(struct ci_hdrc *ci, bool power_lost) +{ + ehci_resume(ci->hcd, power_lost); +} +#endif + +int ci_hdrc_host_init(struct ci_hdrc *ci) +{ + struct ci_role_driver *rdrv; + + if (!hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_HC)) + return -ENXIO; + + rdrv = devm_kzalloc(ci->dev, sizeof(struct ci_role_driver), GFP_KERNEL); + if (!rdrv) + return -ENOMEM; + + rdrv->start = host_start; + rdrv->stop = host_stop; +#ifdef CONFIG_PM_SLEEP + rdrv->suspend = ci_hdrc_host_suspend; + rdrv->resume = ci_hdrc_host_resume; +#endif + rdrv->irq = host_irq; + rdrv->name = "host"; + ci->roles[CI_ROLE_HOST] = rdrv; + + if (ci->platdata->flags & CI_HDRC_REQUIRES_ALIGNED_DMA) { + ci_ehci_hc_driver.map_urb_for_dma = ci_hdrc_map_urb_for_dma; + ci_ehci_hc_driver.unmap_urb_for_dma = ci_hdrc_unmap_urb_for_dma; + } + + return 0; +} + +void ci_hdrc_host_driver_init(void) +{ + ehci_init_driver(&ci_ehci_hc_driver, &ehci_ci_overrides); + orig_bus_suspend = ci_ehci_hc_driver.bus_suspend; + ci_ehci_hc_driver.bus_suspend = ci_ehci_bus_suspend; + ci_ehci_hc_driver.hub_control = ci_ehci_hub_control; +} -- cgit v1.2.3