From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- drivers/usb/misc/usb3503.c | 460 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 460 insertions(+) create mode 100644 drivers/usb/misc/usb3503.c (limited to 'drivers/usb/misc/usb3503.c') diff --git a/drivers/usb/misc/usb3503.c b/drivers/usb/misc/usb3503.c new file mode 100644 index 0000000000..7276507793 --- /dev/null +++ b/drivers/usb/misc/usb3503.c @@ -0,0 +1,460 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Driver for SMSC USB3503 USB 2.0 hub controller driver + * + * Copyright (c) 2012-2013 Dongjin Kim (tobetter@gmail.com) + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define USB3503_VIDL 0x00 +#define USB3503_VIDM 0x01 +#define USB3503_PIDL 0x02 +#define USB3503_PIDM 0x03 +#define USB3503_DIDL 0x04 +#define USB3503_DIDM 0x05 + +#define USB3503_CFG1 0x06 +#define USB3503_SELF_BUS_PWR (1 << 7) + +#define USB3503_CFG2 0x07 +#define USB3503_CFG3 0x08 +#define USB3503_NRD 0x09 + +#define USB3503_PDS 0x0a + +#define USB3503_SP_ILOCK 0xe7 +#define USB3503_SPILOCK_CONNECT (1 << 1) +#define USB3503_SPILOCK_CONFIG (1 << 0) + +#define USB3503_CFGP 0xee +#define USB3503_CLKSUSP (1 << 7) + +#define USB3503_RESET 0xff + +struct usb3503 { + enum usb3503_mode mode; + struct regmap *regmap; + struct device *dev; + struct clk *clk; + u8 port_off_mask; + struct gpio_desc *bypass; + struct gpio_desc *intn; + struct gpio_desc *reset; + struct gpio_desc *connect; + bool secondary_ref_clk; +}; + +static int usb3503_connect(struct usb3503 *hub) +{ + struct device *dev = hub->dev; + int err; + + if (hub->regmap) { + /* SP_ILOCK: set connect_n, config_n for config */ + err = regmap_write(hub->regmap, USB3503_SP_ILOCK, + (USB3503_SPILOCK_CONNECT + | USB3503_SPILOCK_CONFIG)); + if (err < 0) { + dev_err(dev, "SP_ILOCK failed (%d)\n", err); + return err; + } + + /* PDS : Set the ports which are disabled in self-powered mode. */ + if (hub->port_off_mask) { + err = regmap_update_bits(hub->regmap, USB3503_PDS, + hub->port_off_mask, + hub->port_off_mask); + if (err < 0) { + dev_err(dev, "PDS failed (%d)\n", err); + return err; + } + } + + /* CFG1 : Set SELF_BUS_PWR, this enables self-powered operation. */ + err = regmap_update_bits(hub->regmap, USB3503_CFG1, + USB3503_SELF_BUS_PWR, + USB3503_SELF_BUS_PWR); + if (err < 0) { + dev_err(dev, "CFG1 failed (%d)\n", err); + return err; + } + + /* SP_LOCK: clear connect_n, config_n for hub connect */ + err = regmap_update_bits(hub->regmap, USB3503_SP_ILOCK, + (USB3503_SPILOCK_CONNECT + | USB3503_SPILOCK_CONFIG), 0); + if (err < 0) { + dev_err(dev, "SP_ILOCK failed (%d)\n", err); + return err; + } + } + + if (hub->connect) + gpiod_set_value_cansleep(hub->connect, 1); + + hub->mode = USB3503_MODE_HUB; + dev_info(dev, "switched to HUB mode\n"); + + return 0; +} + +static int usb3503_switch_mode(struct usb3503 *hub, enum usb3503_mode mode) +{ + struct device *dev = hub->dev; + int rst, bypass, conn; + + switch (mode) { + case USB3503_MODE_HUB: + conn = 1; + rst = 0; + bypass = 0; + break; + case USB3503_MODE_STANDBY: + conn = 0; + rst = 1; + bypass = 1; + dev_info(dev, "switched to STANDBY mode\n"); + break; + case USB3503_MODE_BYPASS: + conn = 0; + rst = 0; + bypass = 1; + break; + default: + dev_err(dev, "unknown mode is requested\n"); + return -EINVAL; + } + + if (!conn && hub->connect) + gpiod_set_value_cansleep(hub->connect, 0); + + if (hub->reset) + gpiod_set_value_cansleep(hub->reset, rst); + + if (hub->bypass) + gpiod_set_value_cansleep(hub->bypass, bypass); + + if (conn) { + /* Wait T_HUBINIT == 4ms for hub logic to stabilize */ + usleep_range(4000, 10000); + return usb3503_connect(hub); + } + + return 0; +} + +static const struct regmap_config usb3503_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = USB3503_RESET, +}; + +static int usb3503_probe(struct usb3503 *hub) +{ + struct device *dev = hub->dev; + struct usb3503_platform_data *pdata = dev_get_platdata(dev); + struct device_node *np = dev->of_node; + int err; + bool is_clk_enabled = false; + u32 mode = USB3503_MODE_HUB; + const u32 *property; + enum gpiod_flags flags; + int len; + + if (pdata) { + hub->port_off_mask = pdata->port_off_mask; + hub->mode = pdata->initial_mode; + } else if (np) { + u32 rate = 0; + hub->port_off_mask = 0; + + if (!of_property_read_u32(np, "refclk-frequency", &rate)) { + switch (rate) { + case 38400000: + case 26000000: + case 19200000: + case 12000000: + hub->secondary_ref_clk = 0; + break; + case 24000000: + case 27000000: + case 25000000: + case 50000000: + hub->secondary_ref_clk = 1; + break; + default: + dev_err(dev, + "unsupported reference clock rate (%d)\n", + (int) rate); + return -EINVAL; + } + } + + hub->clk = devm_clk_get_optional(dev, "refclk"); + if (IS_ERR(hub->clk)) { + dev_err(dev, "unable to request refclk (%ld)\n", + PTR_ERR(hub->clk)); + return PTR_ERR(hub->clk); + } + + if (rate != 0) { + err = clk_set_rate(hub->clk, rate); + if (err) { + dev_err(dev, + "unable to set reference clock rate to %d\n", + (int)rate); + return err; + } + } + + err = clk_prepare_enable(hub->clk); + if (err) { + dev_err(dev, "unable to enable reference clock\n"); + return err; + } + + is_clk_enabled = true; + property = of_get_property(np, "disabled-ports", &len); + if (property && (len / sizeof(u32)) > 0) { + int i; + for (i = 0; i < len / sizeof(u32); i++) { + u32 port = be32_to_cpu(property[i]); + if ((1 <= port) && (port <= 3)) + hub->port_off_mask |= (1 << port); + } + } + + of_property_read_u32(np, "initial-mode", &mode); + hub->mode = mode; + } + + if (hub->secondary_ref_clk) + flags = GPIOD_OUT_LOW; + else + flags = GPIOD_OUT_HIGH; + hub->intn = devm_gpiod_get_optional(dev, "intn", flags); + if (IS_ERR(hub->intn)) { + err = PTR_ERR(hub->intn); + goto err_clk; + } + if (hub->intn) + gpiod_set_consumer_name(hub->intn, "usb3503 intn"); + + hub->connect = devm_gpiod_get_optional(dev, "connect", GPIOD_OUT_LOW); + if (IS_ERR(hub->connect)) { + err = PTR_ERR(hub->connect); + goto err_clk; + } + if (hub->connect) + gpiod_set_consumer_name(hub->connect, "usb3503 connect"); + + hub->bypass = devm_gpiod_get_optional(dev, "bypass", GPIOD_OUT_HIGH); + if (IS_ERR(hub->bypass)) { + err = PTR_ERR(hub->bypass); + goto err_clk; + } + if (hub->bypass) + gpiod_set_consumer_name(hub->bypass, "usb3503 bypass"); + + hub->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(hub->reset)) { + err = PTR_ERR(hub->reset); + goto err_clk; + } + if (hub->reset) { + /* Datasheet defines a hardware reset to be at least 100us */ + usleep_range(100, 10000); + gpiod_set_consumer_name(hub->reset, "usb3503 reset"); + } + + if (hub->port_off_mask && !hub->regmap) + dev_err(dev, "Ports disabled with no control interface\n"); + + usb3503_switch_mode(hub, hub->mode); + + dev_info(dev, "%s: probed in %s mode\n", __func__, + (hub->mode == USB3503_MODE_HUB) ? "hub" : "standby"); + + return 0; + +err_clk: + if (is_clk_enabled) + clk_disable_unprepare(hub->clk); + return err; +} + +static int usb3503_i2c_probe(struct i2c_client *i2c) +{ + struct usb3503 *hub; + int err; + + hub = devm_kzalloc(&i2c->dev, sizeof(struct usb3503), GFP_KERNEL); + if (!hub) + return -ENOMEM; + + i2c_set_clientdata(i2c, hub); + hub->regmap = devm_regmap_init_i2c(i2c, &usb3503_regmap_config); + if (IS_ERR(hub->regmap)) { + err = PTR_ERR(hub->regmap); + dev_err(&i2c->dev, "Failed to initialise regmap: %d\n", err); + return err; + } + hub->dev = &i2c->dev; + + return usb3503_probe(hub); +} + +static void usb3503_i2c_remove(struct i2c_client *i2c) +{ + struct usb3503 *hub; + + hub = i2c_get_clientdata(i2c); + clk_disable_unprepare(hub->clk); +} + +static int usb3503_platform_probe(struct platform_device *pdev) +{ + struct usb3503 *hub; + + hub = devm_kzalloc(&pdev->dev, sizeof(struct usb3503), GFP_KERNEL); + if (!hub) + return -ENOMEM; + hub->dev = &pdev->dev; + platform_set_drvdata(pdev, hub); + + return usb3503_probe(hub); +} + +static void usb3503_platform_remove(struct platform_device *pdev) +{ + struct usb3503 *hub; + + hub = platform_get_drvdata(pdev); + clk_disable_unprepare(hub->clk); +} + +static int __maybe_unused usb3503_suspend(struct usb3503 *hub) +{ + usb3503_switch_mode(hub, USB3503_MODE_STANDBY); + clk_disable_unprepare(hub->clk); + + return 0; +} + +static int __maybe_unused usb3503_resume(struct usb3503 *hub) +{ + clk_prepare_enable(hub->clk); + usb3503_switch_mode(hub, hub->mode); + + return 0; +} + +static int __maybe_unused usb3503_i2c_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + + return usb3503_suspend(i2c_get_clientdata(client)); +} + +static int __maybe_unused usb3503_i2c_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + + return usb3503_resume(i2c_get_clientdata(client)); +} + +static int __maybe_unused usb3503_platform_suspend(struct device *dev) +{ + return usb3503_suspend(dev_get_drvdata(dev)); +} + +static int __maybe_unused usb3503_platform_resume(struct device *dev) +{ + return usb3503_resume(dev_get_drvdata(dev)); +} + +static SIMPLE_DEV_PM_OPS(usb3503_i2c_pm_ops, usb3503_i2c_suspend, + usb3503_i2c_resume); + +static SIMPLE_DEV_PM_OPS(usb3503_platform_pm_ops, usb3503_platform_suspend, + usb3503_platform_resume); + +static const struct i2c_device_id usb3503_id[] = { + { USB3503_I2C_NAME, 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, usb3503_id); + +#ifdef CONFIG_OF +static const struct of_device_id usb3503_of_match[] = { + { .compatible = "smsc,usb3503", }, + { .compatible = "smsc,usb3503a", }, + { .compatible = "smsc,usb3803", }, + {}, +}; +MODULE_DEVICE_TABLE(of, usb3503_of_match); +#endif + +static struct i2c_driver usb3503_i2c_driver = { + .driver = { + .name = USB3503_I2C_NAME, + .pm = pm_ptr(&usb3503_i2c_pm_ops), + .of_match_table = of_match_ptr(usb3503_of_match), + }, + .probe = usb3503_i2c_probe, + .remove = usb3503_i2c_remove, + .id_table = usb3503_id, +}; + +static struct platform_driver usb3503_platform_driver = { + .driver = { + .name = USB3503_I2C_NAME, + .of_match_table = of_match_ptr(usb3503_of_match), + .pm = pm_ptr(&usb3503_platform_pm_ops), + }, + .probe = usb3503_platform_probe, + .remove_new = usb3503_platform_remove, +}; + +static int __init usb3503_init(void) +{ + int err; + + err = i2c_add_driver(&usb3503_i2c_driver); + if (err) { + pr_err("usb3503: Failed to register I2C driver: %d\n", err); + return err; + } + + err = platform_driver_register(&usb3503_platform_driver); + if (err) { + pr_err("usb3503: Failed to register platform driver: %d\n", + err); + i2c_del_driver(&usb3503_i2c_driver); + return err; + } + + return 0; +} +module_init(usb3503_init); + +static void __exit usb3503_exit(void) +{ + platform_driver_unregister(&usb3503_platform_driver); + i2c_del_driver(&usb3503_i2c_driver); +} +module_exit(usb3503_exit); + +MODULE_AUTHOR("Dongjin Kim "); +MODULE_DESCRIPTION("USB3503 USB HUB driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3