From 638a9e433ecd61e64761352dbec1fa4f5874c941 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Wed, 7 Aug 2024 15:18:06 +0200 Subject: Merging upstream version 6.10.3. Signed-off-by: Daniel Baumann --- drivers/usb/storage/scsiglue.c | 57 +++++++++++++++++++----------------------- 1 file changed, 26 insertions(+), 31 deletions(-) (limited to 'drivers/usb/storage/scsiglue.c') diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index 7d87e2a521..8c8b5e6041 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -40,7 +40,6 @@ #include #include "usb.h" -#include #include "scsiglue.h" #include "debug.h" #include "transport.h" @@ -76,12 +75,6 @@ static int slave_alloc (struct scsi_device *sdev) */ sdev->inquiry_len = 36; - /* - * Some host controllers may have alignment requirements. - * We'll play it safe by requiring 512-byte alignment always. - */ - blk_queue_update_dma_alignment(sdev->request_queue, (512 - 1)); - /* Tell the SCSI layer if we know there is more than one LUN */ if (us->protocol == USB_PR_BULK && us->max_lun > 0) sdev->sdev_bflags |= BLIST_FORCELUN; @@ -95,7 +88,7 @@ static int slave_alloc (struct scsi_device *sdev) return 0; } -static int slave_configure(struct scsi_device *sdev) +static int device_configure(struct scsi_device *sdev, struct queue_limits *lim) { struct us_data *us = host_to_us(sdev->host); struct device *dev = us->pusb_dev->bus->sysdev; @@ -110,40 +103,28 @@ static int slave_configure(struct scsi_device *sdev) if (us->fflags & US_FL_MAX_SECTORS_MIN) max_sectors = PAGE_SIZE >> 9; - if (queue_max_hw_sectors(sdev->request_queue) > max_sectors) - blk_queue_max_hw_sectors(sdev->request_queue, - max_sectors); + lim->max_hw_sectors = min(lim->max_hw_sectors, max_sectors); } else if (sdev->type == TYPE_TAPE) { /* * Tapes need much higher max_sector limits, so just * raise it to the maximum possible (4 GB / 512) and * let the queue segment size sort out the real limit. */ - blk_queue_max_hw_sectors(sdev->request_queue, 0x7FFFFF); + lim->max_hw_sectors = 0x7FFFFF; } else if (us->pusb_dev->speed >= USB_SPEED_SUPER) { /* * USB3 devices will be limited to 2048 sectors. This gives us * better throughput on most devices. */ - blk_queue_max_hw_sectors(sdev->request_queue, 2048); + lim->max_hw_sectors = 2048; } /* * The max_hw_sectors should be up to maximum size of a mapping for * the device. Otherwise, a DMA API might fail on swiotlb environment. */ - blk_queue_max_hw_sectors(sdev->request_queue, - min_t(size_t, queue_max_hw_sectors(sdev->request_queue), - dma_max_mapping_size(dev) >> SECTOR_SHIFT)); - - /* - * Some USB host controllers can't do DMA; they have to use PIO. - * For such controllers we need to make sure the block layer sets - * up bounce buffers in addressable memory. - */ - if (!hcd_uses_dma(bus_to_hcd(us->pusb_dev->bus)) || - (bus_to_hcd(us->pusb_dev->bus)->localmem_pool != NULL)) - blk_queue_bounce_limit(sdev->request_queue, BLK_BOUNCE_HIGH); + lim->max_hw_sectors = min_t(size_t, + lim->max_hw_sectors, dma_max_mapping_size(dev) >> SECTOR_SHIFT); /* * We can't put these settings in slave_alloc() because that gets @@ -604,13 +585,22 @@ static ssize_t max_sectors_store(struct device *dev, struct device_attribute *at size_t count) { struct scsi_device *sdev = to_scsi_device(dev); + struct queue_limits lim; unsigned short ms; + int ret; - if (sscanf(buf, "%hu", &ms) > 0) { - blk_queue_max_hw_sectors(sdev->request_queue, ms); - return count; - } - return -EINVAL; + if (sscanf(buf, "%hu", &ms) <= 0) + return -EINVAL; + + blk_mq_freeze_queue(sdev->request_queue); + lim = queue_limits_start_update(sdev->request_queue); + lim.max_hw_sectors = ms; + ret = queue_limits_commit_update(sdev->request_queue, &lim); + blk_mq_unfreeze_queue(sdev->request_queue); + + if (ret) + return ret; + return count; } static DEVICE_ATTR_RW(max_sectors); @@ -648,12 +638,17 @@ static const struct scsi_host_template usb_stor_host_template = { .this_id = -1, .slave_alloc = slave_alloc, - .slave_configure = slave_configure, + .device_configure = device_configure, .target_alloc = target_alloc, /* lots of sg segments can be handled */ .sg_tablesize = SG_MAX_SEGMENTS, + /* + * Some host controllers may have alignment requirements. + * We'll play it safe by requiring 512-byte alignment always. + */ + .dma_alignment = 511, /* * Limit the total size of a transfer to 120 KB. -- cgit v1.2.3