From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- sound/soc/codecs/tas6424.c | 814 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 814 insertions(+) create mode 100644 sound/soc/codecs/tas6424.c (limited to 'sound/soc/codecs/tas6424.c') diff --git a/sound/soc/codecs/tas6424.c b/sound/soc/codecs/tas6424.c new file mode 100644 index 0000000000..da89e8c681 --- /dev/null +++ b/sound/soc/codecs/tas6424.c @@ -0,0 +1,814 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * ALSA SoC Texas Instruments TAS6424 Quad-Channel Audio Amplifier + * + * Copyright (C) 2016-2017 Texas Instruments Incorporated - https://www.ti.com/ + * Author: Andreas Dannenberg + * Andrew F. Davis + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include "tas6424.h" + +/* Define how often to check (and clear) the fault status register (in ms) */ +#define TAS6424_FAULT_CHECK_INTERVAL 200 + +static const char * const tas6424_supply_names[] = { + "dvdd", /* Digital power supply. Connect to 3.3-V supply. */ + "vbat", /* Supply used for higher voltage analog circuits. */ + "pvdd", /* Class-D amp output FETs supply. */ +}; +#define TAS6424_NUM_SUPPLIES ARRAY_SIZE(tas6424_supply_names) + +struct tas6424_data { + struct device *dev; + struct regmap *regmap; + struct regulator_bulk_data supplies[TAS6424_NUM_SUPPLIES]; + struct delayed_work fault_check_work; + unsigned int last_cfault; + unsigned int last_fault1; + unsigned int last_fault2; + unsigned int last_warn; + struct gpio_desc *standby_gpio; + struct gpio_desc *mute_gpio; +}; + +/* + * DAC digital volumes. From -103.5 to 24 dB in 0.5 dB steps. Note that + * setting the gain below -100 dB (register value <0x7) is effectively a MUTE + * as per device datasheet. + */ +static DECLARE_TLV_DB_SCALE(dac_tlv, -10350, 50, 0); + +static const struct snd_kcontrol_new tas6424_snd_controls[] = { + SOC_SINGLE_TLV("Speaker Driver CH1 Playback Volume", + TAS6424_CH1_VOL_CTRL, 0, 0xff, 0, dac_tlv), + SOC_SINGLE_TLV("Speaker Driver CH2 Playback Volume", + TAS6424_CH2_VOL_CTRL, 0, 0xff, 0, dac_tlv), + SOC_SINGLE_TLV("Speaker Driver CH3 Playback Volume", + TAS6424_CH3_VOL_CTRL, 0, 0xff, 0, dac_tlv), + SOC_SINGLE_TLV("Speaker Driver CH4 Playback Volume", + TAS6424_CH4_VOL_CTRL, 0, 0xff, 0, dac_tlv), + SOC_SINGLE_STROBE("Auto Diagnostics Switch", TAS6424_DC_DIAG_CTRL1, + TAS6424_LDGBYPASS_SHIFT, 1), +}; + +static int tas6424_dac_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); + struct tas6424_data *tas6424 = snd_soc_component_get_drvdata(component); + + dev_dbg(component->dev, "%s() event=0x%0x\n", __func__, event); + + if (event & SND_SOC_DAPM_POST_PMU) { + /* Observe codec shutdown-to-active time */ + msleep(12); + + /* Turn on TAS6424 periodic fault checking/handling */ + tas6424->last_fault1 = 0; + tas6424->last_fault2 = 0; + tas6424->last_warn = 0; + schedule_delayed_work(&tas6424->fault_check_work, + msecs_to_jiffies(TAS6424_FAULT_CHECK_INTERVAL)); + } else if (event & SND_SOC_DAPM_PRE_PMD) { + /* Disable TAS6424 periodic fault checking/handling */ + cancel_delayed_work_sync(&tas6424->fault_check_work); + } + + return 0; +} + +static const struct snd_soc_dapm_widget tas6424_dapm_widgets[] = { + SND_SOC_DAPM_AIF_IN("DAC IN", "Playback", 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_DAC_E("DAC", NULL, SND_SOC_NOPM, 0, 0, tas6424_dac_event, + SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), + SND_SOC_DAPM_OUTPUT("OUT") +}; + +static const struct snd_soc_dapm_route tas6424_audio_map[] = { + { "DAC", NULL, "DAC IN" }, + { "OUT", NULL, "DAC" }, +}; + +static int tas6424_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + unsigned int rate = params_rate(params); + unsigned int width = params_width(params); + u8 sap_ctrl = 0; + + dev_dbg(component->dev, "%s() rate=%u width=%u\n", __func__, rate, width); + + switch (rate) { + case 44100: + sap_ctrl |= TAS6424_SAP_RATE_44100; + break; + case 48000: + sap_ctrl |= TAS6424_SAP_RATE_48000; + break; + case 96000: + sap_ctrl |= TAS6424_SAP_RATE_96000; + break; + default: + dev_err(component->dev, "unsupported sample rate: %u\n", rate); + return -EINVAL; + } + + switch (width) { + case 16: + sap_ctrl |= TAS6424_SAP_TDM_SLOT_SZ_16; + break; + case 24: + break; + default: + dev_err(component->dev, "unsupported sample width: %u\n", width); + return -EINVAL; + } + + snd_soc_component_update_bits(component, TAS6424_SAP_CTRL, + TAS6424_SAP_RATE_MASK | + TAS6424_SAP_TDM_SLOT_SZ_16, + sap_ctrl); + + return 0; +} + +static int tas6424_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt) +{ + struct snd_soc_component *component = dai->component; + u8 serial_format = 0; + + dev_dbg(component->dev, "%s() fmt=0x%0x\n", __func__, fmt); + + /* clock masters */ + switch (fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK) { + case SND_SOC_DAIFMT_CBC_CFC: + break; + default: + dev_err(component->dev, "Invalid DAI clocking\n"); + return -EINVAL; + } + + /* signal polarity */ + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + default: + dev_err(component->dev, "Invalid DAI clock signal polarity\n"); + return -EINVAL; + } + + /* interface format */ + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + serial_format |= TAS6424_SAP_I2S; + break; + case SND_SOC_DAIFMT_DSP_A: + serial_format |= TAS6424_SAP_DSP; + break; + case SND_SOC_DAIFMT_DSP_B: + /* + * We can use the fact that the TAS6424 does not care about the + * LRCLK duty cycle during TDM to receive DSP_B formatted data + * in LEFTJ mode (no delaying of the 1st data bit). + */ + serial_format |= TAS6424_SAP_LEFTJ; + break; + case SND_SOC_DAIFMT_LEFT_J: + serial_format |= TAS6424_SAP_LEFTJ; + break; + default: + dev_err(component->dev, "Invalid DAI interface format\n"); + return -EINVAL; + } + + snd_soc_component_update_bits(component, TAS6424_SAP_CTRL, + TAS6424_SAP_FMT_MASK, serial_format); + + return 0; +} + +static int tas6424_set_dai_tdm_slot(struct snd_soc_dai *dai, + unsigned int tx_mask, unsigned int rx_mask, + int slots, int slot_width) +{ + struct snd_soc_component *component = dai->component; + unsigned int first_slot, last_slot; + bool sap_tdm_slot_last; + + dev_dbg(component->dev, "%s() tx_mask=%d rx_mask=%d\n", __func__, + tx_mask, rx_mask); + + if (!tx_mask || !rx_mask) + return 0; /* nothing needed to disable TDM mode */ + + /* + * Determine the first slot and last slot that is being requested so + * we'll be able to more easily enforce certain constraints as the + * TAS6424's TDM interface is not fully configurable. + */ + first_slot = __ffs(tx_mask); + last_slot = __fls(rx_mask); + + if (last_slot - first_slot != 4) { + dev_err(component->dev, "tdm mask must cover 4 contiguous slots\n"); + return -EINVAL; + } + + switch (first_slot) { + case 0: + sap_tdm_slot_last = false; + break; + case 4: + sap_tdm_slot_last = true; + break; + default: + dev_err(component->dev, "tdm mask must start at slot 0 or 4\n"); + return -EINVAL; + } + + snd_soc_component_update_bits(component, TAS6424_SAP_CTRL, TAS6424_SAP_TDM_SLOT_LAST, + sap_tdm_slot_last ? TAS6424_SAP_TDM_SLOT_LAST : 0); + + return 0; +} + +static int tas6424_mute(struct snd_soc_dai *dai, int mute, int direction) +{ + struct snd_soc_component *component = dai->component; + struct tas6424_data *tas6424 = snd_soc_component_get_drvdata(component); + unsigned int val; + + dev_dbg(component->dev, "%s() mute=%d\n", __func__, mute); + + if (tas6424->mute_gpio) { + gpiod_set_value_cansleep(tas6424->mute_gpio, mute); + return 0; + } + + if (mute) + val = TAS6424_ALL_STATE_MUTE; + else + val = TAS6424_ALL_STATE_PLAY; + + snd_soc_component_write(component, TAS6424_CH_STATE_CTRL, val); + + return 0; +} + +static int tas6424_power_off(struct snd_soc_component *component) +{ + struct tas6424_data *tas6424 = snd_soc_component_get_drvdata(component); + int ret; + + snd_soc_component_write(component, TAS6424_CH_STATE_CTRL, TAS6424_ALL_STATE_HIZ); + + regcache_cache_only(tas6424->regmap, true); + regcache_mark_dirty(tas6424->regmap); + + ret = regulator_bulk_disable(ARRAY_SIZE(tas6424->supplies), + tas6424->supplies); + if (ret < 0) { + dev_err(component->dev, "failed to disable supplies: %d\n", ret); + return ret; + } + + return 0; +} + +static int tas6424_power_on(struct snd_soc_component *component) +{ + struct tas6424_data *tas6424 = snd_soc_component_get_drvdata(component); + int ret; + u8 chan_states; + int no_auto_diags = 0; + unsigned int reg_val; + + if (!regmap_read(tas6424->regmap, TAS6424_DC_DIAG_CTRL1, ®_val)) + no_auto_diags = reg_val & TAS6424_LDGBYPASS_MASK; + + ret = regulator_bulk_enable(ARRAY_SIZE(tas6424->supplies), + tas6424->supplies); + if (ret < 0) { + dev_err(component->dev, "failed to enable supplies: %d\n", ret); + return ret; + } + + regcache_cache_only(tas6424->regmap, false); + + ret = regcache_sync(tas6424->regmap); + if (ret < 0) { + dev_err(component->dev, "failed to sync regcache: %d\n", ret); + return ret; + } + + if (tas6424->mute_gpio) { + gpiod_set_value_cansleep(tas6424->mute_gpio, 0); + /* + * channels are muted via the mute pin. Don't also mute + * them via the registers so that subsequent register + * access is not necessary to un-mute the channels + */ + chan_states = TAS6424_ALL_STATE_PLAY; + } else { + chan_states = TAS6424_ALL_STATE_MUTE; + } + snd_soc_component_write(component, TAS6424_CH_STATE_CTRL, chan_states); + + /* any time we come out of HIZ, the output channels automatically run DC + * load diagnostics if autodiagnotics are enabled. wait here until this + * completes. + */ + if (!no_auto_diags) + msleep(230); + + return 0; +} + +static int tas6424_set_bias_level(struct snd_soc_component *component, + enum snd_soc_bias_level level) +{ + dev_dbg(component->dev, "%s() level=%d\n", __func__, level); + + switch (level) { + case SND_SOC_BIAS_ON: + case SND_SOC_BIAS_PREPARE: + break; + case SND_SOC_BIAS_STANDBY: + if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_OFF) + tas6424_power_on(component); + break; + case SND_SOC_BIAS_OFF: + tas6424_power_off(component); + break; + } + + return 0; +} + +static struct snd_soc_component_driver soc_codec_dev_tas6424 = { + .set_bias_level = tas6424_set_bias_level, + .controls = tas6424_snd_controls, + .num_controls = ARRAY_SIZE(tas6424_snd_controls), + .dapm_widgets = tas6424_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(tas6424_dapm_widgets), + .dapm_routes = tas6424_audio_map, + .num_dapm_routes = ARRAY_SIZE(tas6424_audio_map), + .use_pmdown_time = 1, + .endianness = 1, +}; + +static const struct snd_soc_dai_ops tas6424_speaker_dai_ops = { + .hw_params = tas6424_hw_params, + .set_fmt = tas6424_set_dai_fmt, + .set_tdm_slot = tas6424_set_dai_tdm_slot, + .mute_stream = tas6424_mute, + .no_capture_mute = 1, +}; + +static struct snd_soc_dai_driver tas6424_dai[] = { + { + .name = "tas6424-amplifier", + .playback = { + .stream_name = "Playback", + .channels_min = 1, + .channels_max = 4, + .rates = TAS6424_RATES, + .formats = TAS6424_FORMATS, + }, + .ops = &tas6424_speaker_dai_ops, + }, +}; + +static void tas6424_fault_check_work(struct work_struct *work) +{ + struct tas6424_data *tas6424 = container_of(work, struct tas6424_data, + fault_check_work.work); + struct device *dev = tas6424->dev; + unsigned int reg; + int ret; + + ret = regmap_read(tas6424->regmap, TAS6424_CHANNEL_FAULT, ®); + if (ret < 0) { + dev_err(dev, "failed to read CHANNEL_FAULT register: %d\n", ret); + goto out; + } + + if (!reg) { + tas6424->last_cfault = reg; + goto check_global_fault1_reg; + } + + /* + * Only flag errors once for a given occurrence. This is needed as + * the TAS6424 will take time clearing the fault condition internally + * during which we don't want to bombard the system with the same + * error message over and over. + */ + if ((reg & TAS6424_FAULT_OC_CH1) && !(tas6424->last_cfault & TAS6424_FAULT_OC_CH1)) + dev_crit(dev, "experienced a channel 1 overcurrent fault\n"); + + if ((reg & TAS6424_FAULT_OC_CH2) && !(tas6424->last_cfault & TAS6424_FAULT_OC_CH2)) + dev_crit(dev, "experienced a channel 2 overcurrent fault\n"); + + if ((reg & TAS6424_FAULT_OC_CH3) && !(tas6424->last_cfault & TAS6424_FAULT_OC_CH3)) + dev_crit(dev, "experienced a channel 3 overcurrent fault\n"); + + if ((reg & TAS6424_FAULT_OC_CH4) && !(tas6424->last_cfault & TAS6424_FAULT_OC_CH4)) + dev_crit(dev, "experienced a channel 4 overcurrent fault\n"); + + if ((reg & TAS6424_FAULT_DC_CH1) && !(tas6424->last_cfault & TAS6424_FAULT_DC_CH1)) + dev_crit(dev, "experienced a channel 1 DC fault\n"); + + if ((reg & TAS6424_FAULT_DC_CH2) && !(tas6424->last_cfault & TAS6424_FAULT_DC_CH2)) + dev_crit(dev, "experienced a channel 2 DC fault\n"); + + if ((reg & TAS6424_FAULT_DC_CH3) && !(tas6424->last_cfault & TAS6424_FAULT_DC_CH3)) + dev_crit(dev, "experienced a channel 3 DC fault\n"); + + if ((reg & TAS6424_FAULT_DC_CH4) && !(tas6424->last_cfault & TAS6424_FAULT_DC_CH4)) + dev_crit(dev, "experienced a channel 4 DC fault\n"); + + /* Store current fault1 value so we can detect any changes next time */ + tas6424->last_cfault = reg; + +check_global_fault1_reg: + ret = regmap_read(tas6424->regmap, TAS6424_GLOB_FAULT1, ®); + if (ret < 0) { + dev_err(dev, "failed to read GLOB_FAULT1 register: %d\n", ret); + goto out; + } + + /* + * Ignore any clock faults as there is no clean way to check for them. + * We would need to start checking for those faults *after* the SAIF + * stream has been setup, and stop checking *before* the stream is + * stopped to avoid any false-positives. However there are no + * appropriate hooks to monitor these events. + */ + reg &= TAS6424_FAULT_PVDD_OV | + TAS6424_FAULT_VBAT_OV | + TAS6424_FAULT_PVDD_UV | + TAS6424_FAULT_VBAT_UV; + + if (!reg) { + tas6424->last_fault1 = reg; + goto check_global_fault2_reg; + } + + if ((reg & TAS6424_FAULT_PVDD_OV) && !(tas6424->last_fault1 & TAS6424_FAULT_PVDD_OV)) + dev_crit(dev, "experienced a PVDD overvoltage fault\n"); + + if ((reg & TAS6424_FAULT_VBAT_OV) && !(tas6424->last_fault1 & TAS6424_FAULT_VBAT_OV)) + dev_crit(dev, "experienced a VBAT overvoltage fault\n"); + + if ((reg & TAS6424_FAULT_PVDD_UV) && !(tas6424->last_fault1 & TAS6424_FAULT_PVDD_UV)) + dev_crit(dev, "experienced a PVDD undervoltage fault\n"); + + if ((reg & TAS6424_FAULT_VBAT_UV) && !(tas6424->last_fault1 & TAS6424_FAULT_VBAT_UV)) + dev_crit(dev, "experienced a VBAT undervoltage fault\n"); + + /* Store current fault1 value so we can detect any changes next time */ + tas6424->last_fault1 = reg; + +check_global_fault2_reg: + ret = regmap_read(tas6424->regmap, TAS6424_GLOB_FAULT2, ®); + if (ret < 0) { + dev_err(dev, "failed to read GLOB_FAULT2 register: %d\n", ret); + goto out; + } + + reg &= TAS6424_FAULT_OTSD | + TAS6424_FAULT_OTSD_CH1 | + TAS6424_FAULT_OTSD_CH2 | + TAS6424_FAULT_OTSD_CH3 | + TAS6424_FAULT_OTSD_CH4; + + if (!reg) { + tas6424->last_fault2 = reg; + goto check_warn_reg; + } + + if ((reg & TAS6424_FAULT_OTSD) && !(tas6424->last_fault2 & TAS6424_FAULT_OTSD)) + dev_crit(dev, "experienced a global overtemp shutdown\n"); + + if ((reg & TAS6424_FAULT_OTSD_CH1) && !(tas6424->last_fault2 & TAS6424_FAULT_OTSD_CH1)) + dev_crit(dev, "experienced an overtemp shutdown on CH1\n"); + + if ((reg & TAS6424_FAULT_OTSD_CH2) && !(tas6424->last_fault2 & TAS6424_FAULT_OTSD_CH2)) + dev_crit(dev, "experienced an overtemp shutdown on CH2\n"); + + if ((reg & TAS6424_FAULT_OTSD_CH3) && !(tas6424->last_fault2 & TAS6424_FAULT_OTSD_CH3)) + dev_crit(dev, "experienced an overtemp shutdown on CH3\n"); + + if ((reg & TAS6424_FAULT_OTSD_CH4) && !(tas6424->last_fault2 & TAS6424_FAULT_OTSD_CH4)) + dev_crit(dev, "experienced an overtemp shutdown on CH4\n"); + + /* Store current fault2 value so we can detect any changes next time */ + tas6424->last_fault2 = reg; + +check_warn_reg: + ret = regmap_read(tas6424->regmap, TAS6424_WARN, ®); + if (ret < 0) { + dev_err(dev, "failed to read WARN register: %d\n", ret); + goto out; + } + + reg &= TAS6424_WARN_VDD_UV | + TAS6424_WARN_VDD_POR | + TAS6424_WARN_VDD_OTW | + TAS6424_WARN_VDD_OTW_CH1 | + TAS6424_WARN_VDD_OTW_CH2 | + TAS6424_WARN_VDD_OTW_CH3 | + TAS6424_WARN_VDD_OTW_CH4; + + if (!reg) { + tas6424->last_warn = reg; + goto out; + } + + if ((reg & TAS6424_WARN_VDD_UV) && !(tas6424->last_warn & TAS6424_WARN_VDD_UV)) + dev_warn(dev, "experienced a VDD under voltage condition\n"); + + if ((reg & TAS6424_WARN_VDD_POR) && !(tas6424->last_warn & TAS6424_WARN_VDD_POR)) + dev_warn(dev, "experienced a VDD POR condition\n"); + + if ((reg & TAS6424_WARN_VDD_OTW) && !(tas6424->last_warn & TAS6424_WARN_VDD_OTW)) + dev_warn(dev, "experienced a global overtemp warning\n"); + + if ((reg & TAS6424_WARN_VDD_OTW_CH1) && !(tas6424->last_warn & TAS6424_WARN_VDD_OTW_CH1)) + dev_warn(dev, "experienced an overtemp warning on CH1\n"); + + if ((reg & TAS6424_WARN_VDD_OTW_CH2) && !(tas6424->last_warn & TAS6424_WARN_VDD_OTW_CH2)) + dev_warn(dev, "experienced an overtemp warning on CH2\n"); + + if ((reg & TAS6424_WARN_VDD_OTW_CH3) && !(tas6424->last_warn & TAS6424_WARN_VDD_OTW_CH3)) + dev_warn(dev, "experienced an overtemp warning on CH3\n"); + + if ((reg & TAS6424_WARN_VDD_OTW_CH4) && !(tas6424->last_warn & TAS6424_WARN_VDD_OTW_CH4)) + dev_warn(dev, "experienced an overtemp warning on CH4\n"); + + /* Store current warn value so we can detect any changes next time */ + tas6424->last_warn = reg; + + /* Clear any warnings by toggling the CLEAR_FAULT control bit */ + ret = regmap_write_bits(tas6424->regmap, TAS6424_MISC_CTRL3, + TAS6424_CLEAR_FAULT, TAS6424_CLEAR_FAULT); + if (ret < 0) + dev_err(dev, "failed to write MISC_CTRL3 register: %d\n", ret); + + ret = regmap_write_bits(tas6424->regmap, TAS6424_MISC_CTRL3, + TAS6424_CLEAR_FAULT, 0); + if (ret < 0) + dev_err(dev, "failed to write MISC_CTRL3 register: %d\n", ret); + +out: + /* Schedule the next fault check at the specified interval */ + schedule_delayed_work(&tas6424->fault_check_work, + msecs_to_jiffies(TAS6424_FAULT_CHECK_INTERVAL)); +} + +static const struct reg_default tas6424_reg_defaults[] = { + { TAS6424_MODE_CTRL, 0x00 }, + { TAS6424_MISC_CTRL1, 0x32 }, + { TAS6424_MISC_CTRL2, 0x62 }, + { TAS6424_SAP_CTRL, 0x04 }, + { TAS6424_CH_STATE_CTRL, 0x55 }, + { TAS6424_CH1_VOL_CTRL, 0xcf }, + { TAS6424_CH2_VOL_CTRL, 0xcf }, + { TAS6424_CH3_VOL_CTRL, 0xcf }, + { TAS6424_CH4_VOL_CTRL, 0xcf }, + { TAS6424_DC_DIAG_CTRL1, 0x00 }, + { TAS6424_DC_DIAG_CTRL2, 0x11 }, + { TAS6424_DC_DIAG_CTRL3, 0x11 }, + { TAS6424_PIN_CTRL, 0xff }, + { TAS6424_AC_DIAG_CTRL1, 0x00 }, + { TAS6424_MISC_CTRL3, 0x00 }, + { TAS6424_CLIP_CTRL, 0x01 }, + { TAS6424_CLIP_WINDOW, 0x14 }, + { TAS6424_CLIP_WARN, 0x00 }, + { TAS6424_CBC_STAT, 0x00 }, + { TAS6424_MISC_CTRL4, 0x40 }, +}; + +static bool tas6424_is_writable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case TAS6424_MODE_CTRL: + case TAS6424_MISC_CTRL1: + case TAS6424_MISC_CTRL2: + case TAS6424_SAP_CTRL: + case TAS6424_CH_STATE_CTRL: + case TAS6424_CH1_VOL_CTRL: + case TAS6424_CH2_VOL_CTRL: + case TAS6424_CH3_VOL_CTRL: + case TAS6424_CH4_VOL_CTRL: + case TAS6424_DC_DIAG_CTRL1: + case TAS6424_DC_DIAG_CTRL2: + case TAS6424_DC_DIAG_CTRL3: + case TAS6424_PIN_CTRL: + case TAS6424_AC_DIAG_CTRL1: + case TAS6424_MISC_CTRL3: + case TAS6424_CLIP_CTRL: + case TAS6424_CLIP_WINDOW: + case TAS6424_CLIP_WARN: + case TAS6424_CBC_STAT: + case TAS6424_MISC_CTRL4: + return true; + default: + return false; + } +} + +static bool tas6424_is_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case TAS6424_DC_LOAD_DIAG_REP12: + case TAS6424_DC_LOAD_DIAG_REP34: + case TAS6424_DC_LOAD_DIAG_REPLO: + case TAS6424_CHANNEL_STATE: + case TAS6424_CHANNEL_FAULT: + case TAS6424_GLOB_FAULT1: + case TAS6424_GLOB_FAULT2: + case TAS6424_WARN: + case TAS6424_AC_LOAD_DIAG_REP1: + case TAS6424_AC_LOAD_DIAG_REP2: + case TAS6424_AC_LOAD_DIAG_REP3: + case TAS6424_AC_LOAD_DIAG_REP4: + return true; + default: + return false; + } +} + +static const struct regmap_config tas6424_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .writeable_reg = tas6424_is_writable_reg, + .volatile_reg = tas6424_is_volatile_reg, + + .max_register = TAS6424_MAX, + .reg_defaults = tas6424_reg_defaults, + .num_reg_defaults = ARRAY_SIZE(tas6424_reg_defaults), + .cache_type = REGCACHE_RBTREE, +}; + +#if IS_ENABLED(CONFIG_OF) +static const struct of_device_id tas6424_of_ids[] = { + { .compatible = "ti,tas6424", }, + { }, +}; +MODULE_DEVICE_TABLE(of, tas6424_of_ids); +#endif + +static int tas6424_i2c_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct tas6424_data *tas6424; + int ret; + int i; + + tas6424 = devm_kzalloc(dev, sizeof(*tas6424), GFP_KERNEL); + if (!tas6424) + return -ENOMEM; + dev_set_drvdata(dev, tas6424); + + tas6424->dev = dev; + + tas6424->regmap = devm_regmap_init_i2c(client, &tas6424_regmap_config); + if (IS_ERR(tas6424->regmap)) { + ret = PTR_ERR(tas6424->regmap); + dev_err(dev, "unable to allocate register map: %d\n", ret); + return ret; + } + + /* + * Get control of the standby pin and set it LOW to take the codec + * out of the stand-by mode. + * Note: The actual pin polarity is taken care of in the GPIO lib + * according the polarity specified in the DTS. + */ + tas6424->standby_gpio = devm_gpiod_get_optional(dev, "standby", + GPIOD_OUT_LOW); + if (IS_ERR(tas6424->standby_gpio)) { + if (PTR_ERR(tas6424->standby_gpio) == -EPROBE_DEFER) + return -EPROBE_DEFER; + dev_info(dev, "failed to get standby GPIO: %ld\n", + PTR_ERR(tas6424->standby_gpio)); + tas6424->standby_gpio = NULL; + } + + /* + * Get control of the mute pin and set it HIGH in order to start with + * all the output muted. + * Note: The actual pin polarity is taken care of in the GPIO lib + * according the polarity specified in the DTS. + */ + tas6424->mute_gpio = devm_gpiod_get_optional(dev, "mute", + GPIOD_OUT_HIGH); + if (IS_ERR(tas6424->mute_gpio)) { + if (PTR_ERR(tas6424->mute_gpio) == -EPROBE_DEFER) + return -EPROBE_DEFER; + dev_info(dev, "failed to get nmute GPIO: %ld\n", + PTR_ERR(tas6424->mute_gpio)); + tas6424->mute_gpio = NULL; + } + + for (i = 0; i < ARRAY_SIZE(tas6424->supplies); i++) + tas6424->supplies[i].supply = tas6424_supply_names[i]; + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(tas6424->supplies), + tas6424->supplies); + if (ret) { + dev_err(dev, "unable to request supplies: %d\n", ret); + return ret; + } + + ret = regulator_bulk_enable(ARRAY_SIZE(tas6424->supplies), + tas6424->supplies); + if (ret) { + dev_err(dev, "unable to enable supplies: %d\n", ret); + return ret; + } + + /* Reset device to establish well-defined startup state */ + ret = regmap_update_bits(tas6424->regmap, TAS6424_MODE_CTRL, + TAS6424_RESET, TAS6424_RESET); + if (ret) { + dev_err(dev, "unable to reset device: %d\n", ret); + goto disable_regs; + } + + INIT_DELAYED_WORK(&tas6424->fault_check_work, tas6424_fault_check_work); + + ret = devm_snd_soc_register_component(dev, &soc_codec_dev_tas6424, + tas6424_dai, ARRAY_SIZE(tas6424_dai)); + if (ret < 0) { + dev_err(dev, "unable to register codec: %d\n", ret); + goto disable_regs; + } + + return 0; + +disable_regs: + regulator_bulk_disable(ARRAY_SIZE(tas6424->supplies), tas6424->supplies); + return ret; +} + +static void tas6424_i2c_remove(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct tas6424_data *tas6424 = dev_get_drvdata(dev); + int ret; + + cancel_delayed_work_sync(&tas6424->fault_check_work); + + /* put the codec in stand-by */ + if (tas6424->standby_gpio) + gpiod_set_value_cansleep(tas6424->standby_gpio, 1); + + ret = regulator_bulk_disable(ARRAY_SIZE(tas6424->supplies), + tas6424->supplies); + if (ret < 0) + dev_err(dev, "unable to disable supplies: %d\n", ret); +} + +static const struct i2c_device_id tas6424_i2c_ids[] = { + { "tas6424", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, tas6424_i2c_ids); + +static struct i2c_driver tas6424_i2c_driver = { + .driver = { + .name = "tas6424", + .of_match_table = of_match_ptr(tas6424_of_ids), + }, + .probe = tas6424_i2c_probe, + .remove = tas6424_i2c_remove, + .id_table = tas6424_i2c_ids, +}; +module_i2c_driver(tas6424_i2c_driver); + +MODULE_AUTHOR("Andreas Dannenberg "); +MODULE_AUTHOR("Andrew F. Davis "); +MODULE_DESCRIPTION("TAS6424 Audio amplifier driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3