From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- sound/soc/sof/pm.c | 389 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 389 insertions(+) create mode 100644 sound/soc/sof/pm.c (limited to 'sound/soc/sof/pm.c') diff --git a/sound/soc/sof/pm.c b/sound/soc/sof/pm.c new file mode 100644 index 0000000000..704b21413c --- /dev/null +++ b/sound/soc/sof/pm.c @@ -0,0 +1,389 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) +// +// This file is provided under a dual BSD/GPLv2 license. When using or +// redistributing this file, you may do so under either license. +// +// Copyright(c) 2018 Intel Corporation. All rights reserved. +// +// Author: Liam Girdwood +// + +#include "ops.h" +#include "sof-priv.h" +#include "sof-audio.h" + +/* + * Helper function to determine the target DSP state during + * system suspend. This function only cares about the device + * D-states. Platform-specific substates, if any, should be + * handled by the platform-specific parts. + */ +static u32 snd_sof_dsp_power_target(struct snd_sof_dev *sdev) +{ + u32 target_dsp_state; + + switch (sdev->system_suspend_target) { + case SOF_SUSPEND_S5: + case SOF_SUSPEND_S4: + /* DSP should be in D3 if the system is suspending to S3+ */ + case SOF_SUSPEND_S3: + /* DSP should be in D3 if the system is suspending to S3 */ + target_dsp_state = SOF_DSP_PM_D3; + break; + case SOF_SUSPEND_S0IX: + /* + * Currently, the only criterion for retaining the DSP in D0 + * is that there are streams that ignored the suspend trigger. + * Additional criteria such Soundwire clock-stop mode and + * device suspend latency considerations will be added later. + */ + if (snd_sof_stream_suspend_ignored(sdev)) + target_dsp_state = SOF_DSP_PM_D0; + else + target_dsp_state = SOF_DSP_PM_D3; + break; + default: + /* This case would be during runtime suspend */ + target_dsp_state = SOF_DSP_PM_D3; + break; + } + + return target_dsp_state; +} + +#if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_ENABLE_DEBUGFS_CACHE) +static void sof_cache_debugfs(struct snd_sof_dev *sdev) +{ + struct snd_sof_dfsentry *dfse; + + list_for_each_entry(dfse, &sdev->dfsentry_list, list) { + + /* nothing to do if debugfs buffer is not IO mem */ + if (dfse->type == SOF_DFSENTRY_TYPE_BUF) + continue; + + /* cache memory that is only accessible in D0 */ + if (dfse->access_type == SOF_DEBUGFS_ACCESS_D0_ONLY) + memcpy_fromio(dfse->cache_buf, dfse->io_mem, + dfse->size); + } +} +#endif + +static int sof_resume(struct device *dev, bool runtime_resume) +{ + struct snd_sof_dev *sdev = dev_get_drvdata(dev); + const struct sof_ipc_pm_ops *pm_ops = sof_ipc_get_ops(sdev, pm); + const struct sof_ipc_tplg_ops *tplg_ops = sof_ipc_get_ops(sdev, tplg); + u32 old_state = sdev->dsp_power_state.state; + int ret; + + /* do nothing if dsp resume callbacks are not set */ + if (!runtime_resume && !sof_ops(sdev)->resume) + return 0; + + if (runtime_resume && !sof_ops(sdev)->runtime_resume) + return 0; + + /* DSP was never successfully started, nothing to resume */ + if (sdev->first_boot) + return 0; + + /* + * if the runtime_resume flag is set, call the runtime_resume routine + * or else call the system resume routine + */ + if (runtime_resume) + ret = snd_sof_dsp_runtime_resume(sdev); + else + ret = snd_sof_dsp_resume(sdev); + if (ret < 0) { + dev_err(sdev->dev, + "error: failed to power up DSP after resume\n"); + return ret; + } + + if (sdev->dspless_mode_selected) { + sof_set_fw_state(sdev, SOF_DSPLESS_MODE); + return 0; + } + + /* + * Nothing further to be done for platforms that support the low power + * D0 substate. Resume trace and return when resuming from + * low-power D0 substate + */ + if (!runtime_resume && sof_ops(sdev)->set_power_state && + old_state == SOF_DSP_PM_D0) { + ret = sof_fw_trace_resume(sdev); + if (ret < 0) + /* non fatal */ + dev_warn(sdev->dev, + "failed to enable trace after resume %d\n", ret); + return 0; + } + + sof_set_fw_state(sdev, SOF_FW_BOOT_PREPARE); + + /* load the firmware */ + ret = snd_sof_load_firmware(sdev); + if (ret < 0) { + dev_err(sdev->dev, + "error: failed to load DSP firmware after resume %d\n", + ret); + sof_set_fw_state(sdev, SOF_FW_BOOT_FAILED); + return ret; + } + + sof_set_fw_state(sdev, SOF_FW_BOOT_IN_PROGRESS); + + /* + * Boot the firmware. The FW boot status will be modified + * in snd_sof_run_firmware() depending on the outcome. + */ + ret = snd_sof_run_firmware(sdev); + if (ret < 0) { + dev_err(sdev->dev, + "error: failed to boot DSP firmware after resume %d\n", + ret); + sof_set_fw_state(sdev, SOF_FW_BOOT_FAILED); + return ret; + } + + /* resume DMA trace */ + ret = sof_fw_trace_resume(sdev); + if (ret < 0) { + /* non fatal */ + dev_warn(sdev->dev, + "warning: failed to init trace after resume %d\n", + ret); + } + + /* restore pipelines */ + if (tplg_ops && tplg_ops->set_up_all_pipelines) { + ret = tplg_ops->set_up_all_pipelines(sdev, false); + if (ret < 0) { + dev_err(sdev->dev, "Failed to restore pipeline after resume %d\n", ret); + goto setup_fail; + } + } + + /* Notify clients not managed by pm framework about core resume */ + sof_resume_clients(sdev); + + /* notify DSP of system resume */ + if (pm_ops && pm_ops->ctx_restore) { + ret = pm_ops->ctx_restore(sdev); + if (ret < 0) + dev_err(sdev->dev, "ctx_restore IPC error during resume: %d\n", ret); + } + +setup_fail: +#if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_ENABLE_DEBUGFS_CACHE) + if (ret < 0) { + /* + * Debugfs cannot be read in runtime suspend, so cache + * the contents upon failure. This allows to capture + * possible DSP coredump information. + */ + sof_cache_debugfs(sdev); + } +#endif + + return ret; +} + +static int sof_suspend(struct device *dev, bool runtime_suspend) +{ + struct snd_sof_dev *sdev = dev_get_drvdata(dev); + const struct sof_ipc_pm_ops *pm_ops = sof_ipc_get_ops(sdev, pm); + const struct sof_ipc_tplg_ops *tplg_ops = sof_ipc_get_ops(sdev, tplg); + pm_message_t pm_state; + u32 target_state = snd_sof_dsp_power_target(sdev); + u32 old_state = sdev->dsp_power_state.state; + int ret; + + /* do nothing if dsp suspend callback is not set */ + if (!runtime_suspend && !sof_ops(sdev)->suspend) + return 0; + + if (runtime_suspend && !sof_ops(sdev)->runtime_suspend) + return 0; + + /* we need to tear down pipelines only if the DSP hardware is + * active, which happens for PCI devices. if the device is + * suspended, it is brought back to full power and then + * suspended again + */ + if (tplg_ops && tplg_ops->tear_down_all_pipelines && (old_state == SOF_DSP_PM_D0)) + tplg_ops->tear_down_all_pipelines(sdev, false); + + if (sdev->fw_state != SOF_FW_BOOT_COMPLETE) + goto suspend; + + /* prepare for streams to be resumed properly upon resume */ + if (!runtime_suspend) { + ret = snd_sof_dsp_hw_params_upon_resume(sdev); + if (ret < 0) { + dev_err(sdev->dev, + "error: setting hw_params flag during suspend %d\n", + ret); + return ret; + } + } + + pm_state.event = target_state; + + /* suspend DMA trace */ + sof_fw_trace_suspend(sdev, pm_state); + + /* Notify clients not managed by pm framework about core suspend */ + sof_suspend_clients(sdev, pm_state); + + /* Skip to platform-specific suspend if DSP is entering D0 */ + if (target_state == SOF_DSP_PM_D0) + goto suspend; + +#if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_ENABLE_DEBUGFS_CACHE) + /* cache debugfs contents during runtime suspend */ + if (runtime_suspend) + sof_cache_debugfs(sdev); +#endif + /* notify DSP of upcoming power down */ + if (pm_ops && pm_ops->ctx_save) { + ret = pm_ops->ctx_save(sdev); + if (ret == -EBUSY || ret == -EAGAIN) { + /* + * runtime PM has logic to handle -EBUSY/-EAGAIN so + * pass these errors up + */ + dev_err(sdev->dev, "ctx_save IPC error during suspend: %d\n", ret); + return ret; + } else if (ret < 0) { + /* FW in unexpected state, continue to power down */ + dev_warn(sdev->dev, "ctx_save IPC error: %d, proceeding with suspend\n", + ret); + } + } + +suspend: + + /* return if the DSP was not probed successfully */ + if (sdev->fw_state == SOF_FW_BOOT_NOT_STARTED) + return 0; + + /* platform-specific suspend */ + if (runtime_suspend) + ret = snd_sof_dsp_runtime_suspend(sdev); + else + ret = snd_sof_dsp_suspend(sdev, target_state); + if (ret < 0) + dev_err(sdev->dev, + "error: failed to power down DSP during suspend %d\n", + ret); + + /* Do not reset FW state if DSP is in D0 */ + if (target_state == SOF_DSP_PM_D0) + return ret; + + /* reset FW state */ + sof_set_fw_state(sdev, SOF_FW_BOOT_NOT_STARTED); + sdev->enabled_cores_mask = 0; + + return ret; +} + +int snd_sof_dsp_power_down_notify(struct snd_sof_dev *sdev) +{ + const struct sof_ipc_pm_ops *pm_ops = sof_ipc_get_ops(sdev, pm); + + /* Notify DSP of upcoming power down */ + if (sof_ops(sdev)->remove && pm_ops && pm_ops->ctx_save) + return pm_ops->ctx_save(sdev); + + return 0; +} + +int snd_sof_runtime_suspend(struct device *dev) +{ + return sof_suspend(dev, true); +} +EXPORT_SYMBOL(snd_sof_runtime_suspend); + +int snd_sof_runtime_idle(struct device *dev) +{ + struct snd_sof_dev *sdev = dev_get_drvdata(dev); + + return snd_sof_dsp_runtime_idle(sdev); +} +EXPORT_SYMBOL(snd_sof_runtime_idle); + +int snd_sof_runtime_resume(struct device *dev) +{ + return sof_resume(dev, true); +} +EXPORT_SYMBOL(snd_sof_runtime_resume); + +int snd_sof_resume(struct device *dev) +{ + return sof_resume(dev, false); +} +EXPORT_SYMBOL(snd_sof_resume); + +int snd_sof_suspend(struct device *dev) +{ + return sof_suspend(dev, false); +} +EXPORT_SYMBOL(snd_sof_suspend); + +int snd_sof_prepare(struct device *dev) +{ + struct snd_sof_dev *sdev = dev_get_drvdata(dev); + const struct sof_dev_desc *desc = sdev->pdata->desc; + + /* will suspend to S3 by default */ + sdev->system_suspend_target = SOF_SUSPEND_S3; + + /* + * if the firmware is crashed or boot failed then we try to aim for S3 + * to reboot the firmware + */ + if (sdev->fw_state == SOF_FW_CRASHED || + sdev->fw_state == SOF_FW_BOOT_FAILED) + return 0; + + if (!desc->use_acpi_target_states) + return 0; + +#if defined(CONFIG_ACPI) + switch (acpi_target_system_state()) { + case ACPI_STATE_S0: + sdev->system_suspend_target = SOF_SUSPEND_S0IX; + break; + case ACPI_STATE_S1: + case ACPI_STATE_S2: + case ACPI_STATE_S3: + sdev->system_suspend_target = SOF_SUSPEND_S3; + break; + case ACPI_STATE_S4: + sdev->system_suspend_target = SOF_SUSPEND_S4; + break; + case ACPI_STATE_S5: + sdev->system_suspend_target = SOF_SUSPEND_S5; + break; + default: + break; + } +#endif + + return 0; +} +EXPORT_SYMBOL(snd_sof_prepare); + +void snd_sof_complete(struct device *dev) +{ + struct snd_sof_dev *sdev = dev_get_drvdata(dev); + + sdev->system_suspend_target = SOF_SUSPEND_NONE; +} +EXPORT_SYMBOL(snd_sof_complete); -- cgit v1.2.3