From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- sound/soc/ti/omap-mcbsp.c | 1443 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1443 insertions(+) create mode 100644 sound/soc/ti/omap-mcbsp.c (limited to 'sound/soc/ti/omap-mcbsp.c') diff --git a/sound/soc/ti/omap-mcbsp.c b/sound/soc/ti/omap-mcbsp.c new file mode 100644 index 0000000000..b399d86f22 --- /dev/null +++ b/sound/soc/ti/omap-mcbsp.c @@ -0,0 +1,1443 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * omap-mcbsp.c -- OMAP ALSA SoC DAI driver using McBSP port + * + * Copyright (C) 2008 Nokia Corporation + * + * Contact: Jarkko Nikula + * Peter Ujfalusi + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "omap-mcbsp-priv.h" +#include "omap-mcbsp.h" +#include "sdma-pcm.h" + +#define OMAP_MCBSP_RATES (SNDRV_PCM_RATE_8000_96000) + +enum { + OMAP_MCBSP_WORD_8 = 0, + OMAP_MCBSP_WORD_12, + OMAP_MCBSP_WORD_16, + OMAP_MCBSP_WORD_20, + OMAP_MCBSP_WORD_24, + OMAP_MCBSP_WORD_32, +}; + +static void omap_mcbsp_dump_reg(struct omap_mcbsp *mcbsp) +{ + dev_dbg(mcbsp->dev, "**** McBSP%d regs ****\n", mcbsp->id); + dev_dbg(mcbsp->dev, "DRR2: 0x%04x\n", MCBSP_READ(mcbsp, DRR2)); + dev_dbg(mcbsp->dev, "DRR1: 0x%04x\n", MCBSP_READ(mcbsp, DRR1)); + dev_dbg(mcbsp->dev, "DXR2: 0x%04x\n", MCBSP_READ(mcbsp, DXR2)); + dev_dbg(mcbsp->dev, "DXR1: 0x%04x\n", MCBSP_READ(mcbsp, DXR1)); + dev_dbg(mcbsp->dev, "SPCR2: 0x%04x\n", MCBSP_READ(mcbsp, SPCR2)); + dev_dbg(mcbsp->dev, "SPCR1: 0x%04x\n", MCBSP_READ(mcbsp, SPCR1)); + dev_dbg(mcbsp->dev, "RCR2: 0x%04x\n", MCBSP_READ(mcbsp, RCR2)); + dev_dbg(mcbsp->dev, "RCR1: 0x%04x\n", MCBSP_READ(mcbsp, RCR1)); + dev_dbg(mcbsp->dev, "XCR2: 0x%04x\n", MCBSP_READ(mcbsp, XCR2)); + dev_dbg(mcbsp->dev, "XCR1: 0x%04x\n", MCBSP_READ(mcbsp, XCR1)); + dev_dbg(mcbsp->dev, "SRGR2: 0x%04x\n", MCBSP_READ(mcbsp, SRGR2)); + dev_dbg(mcbsp->dev, "SRGR1: 0x%04x\n", MCBSP_READ(mcbsp, SRGR1)); + dev_dbg(mcbsp->dev, "PCR0: 0x%04x\n", MCBSP_READ(mcbsp, PCR0)); + dev_dbg(mcbsp->dev, "***********************\n"); +} + +static int omap2_mcbsp_set_clks_src(struct omap_mcbsp *mcbsp, u8 fck_src_id) +{ + struct clk *fck_src; + const char *src; + int r; + + if (fck_src_id == MCBSP_CLKS_PAD_SRC) + src = "pad_fck"; + else if (fck_src_id == MCBSP_CLKS_PRCM_SRC) + src = "prcm_fck"; + else + return -EINVAL; + + fck_src = clk_get(mcbsp->dev, src); + if (IS_ERR(fck_src)) { + dev_info(mcbsp->dev, "CLKS: could not clk_get() %s\n", src); + return 0; + } + + if (mcbsp->active) + pm_runtime_put_sync(mcbsp->dev); + + r = clk_set_parent(mcbsp->fclk, fck_src); + if (r) + dev_err(mcbsp->dev, "CLKS: could not clk_set_parent() to %s\n", + src); + + if (mcbsp->active) + pm_runtime_get_sync(mcbsp->dev); + + clk_put(fck_src); + + return r; +} + +static irqreturn_t omap_mcbsp_irq_handler(int irq, void *data) +{ + struct omap_mcbsp *mcbsp = data; + u16 irqst; + + irqst = MCBSP_READ(mcbsp, IRQST); + dev_dbg(mcbsp->dev, "IRQ callback : 0x%x\n", irqst); + + if (irqst & RSYNCERREN) + dev_err(mcbsp->dev, "RX Frame Sync Error!\n"); + if (irqst & RFSREN) + dev_dbg(mcbsp->dev, "RX Frame Sync\n"); + if (irqst & REOFEN) + dev_dbg(mcbsp->dev, "RX End Of Frame\n"); + if (irqst & RRDYEN) + dev_dbg(mcbsp->dev, "RX Buffer Threshold Reached\n"); + if (irqst & RUNDFLEN) + dev_err(mcbsp->dev, "RX Buffer Underflow!\n"); + if (irqst & ROVFLEN) + dev_err(mcbsp->dev, "RX Buffer Overflow!\n"); + + if (irqst & XSYNCERREN) + dev_err(mcbsp->dev, "TX Frame Sync Error!\n"); + if (irqst & XFSXEN) + dev_dbg(mcbsp->dev, "TX Frame Sync\n"); + if (irqst & XEOFEN) + dev_dbg(mcbsp->dev, "TX End Of Frame\n"); + if (irqst & XRDYEN) + dev_dbg(mcbsp->dev, "TX Buffer threshold Reached\n"); + if (irqst & XUNDFLEN) + dev_err(mcbsp->dev, "TX Buffer Underflow!\n"); + if (irqst & XOVFLEN) + dev_err(mcbsp->dev, "TX Buffer Overflow!\n"); + if (irqst & XEMPTYEOFEN) + dev_dbg(mcbsp->dev, "TX Buffer empty at end of frame\n"); + + MCBSP_WRITE(mcbsp, IRQST, irqst); + + return IRQ_HANDLED; +} + +static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *data) +{ + struct omap_mcbsp *mcbsp = data; + u16 irqst_spcr2; + + irqst_spcr2 = MCBSP_READ(mcbsp, SPCR2); + dev_dbg(mcbsp->dev, "TX IRQ callback : 0x%x\n", irqst_spcr2); + + if (irqst_spcr2 & XSYNC_ERR) { + dev_err(mcbsp->dev, "TX Frame Sync Error! : 0x%x\n", + irqst_spcr2); + /* Writing zero to XSYNC_ERR clears the IRQ */ + MCBSP_WRITE(mcbsp, SPCR2, MCBSP_READ_CACHE(mcbsp, SPCR2)); + } + + return IRQ_HANDLED; +} + +static irqreturn_t omap_mcbsp_rx_irq_handler(int irq, void *data) +{ + struct omap_mcbsp *mcbsp = data; + u16 irqst_spcr1; + + irqst_spcr1 = MCBSP_READ(mcbsp, SPCR1); + dev_dbg(mcbsp->dev, "RX IRQ callback : 0x%x\n", irqst_spcr1); + + if (irqst_spcr1 & RSYNC_ERR) { + dev_err(mcbsp->dev, "RX Frame Sync Error! : 0x%x\n", + irqst_spcr1); + /* Writing zero to RSYNC_ERR clears the IRQ */ + MCBSP_WRITE(mcbsp, SPCR1, MCBSP_READ_CACHE(mcbsp, SPCR1)); + } + + return IRQ_HANDLED; +} + +/* + * omap_mcbsp_config simply write a config to the + * appropriate McBSP. + * You either call this function or set the McBSP registers + * by yourself before calling omap_mcbsp_start(). + */ +static void omap_mcbsp_config(struct omap_mcbsp *mcbsp, + const struct omap_mcbsp_reg_cfg *config) +{ + dev_dbg(mcbsp->dev, "Configuring McBSP%d phys_base: 0x%08lx\n", + mcbsp->id, mcbsp->phys_base); + + /* We write the given config */ + MCBSP_WRITE(mcbsp, SPCR2, config->spcr2); + MCBSP_WRITE(mcbsp, SPCR1, config->spcr1); + MCBSP_WRITE(mcbsp, RCR2, config->rcr2); + MCBSP_WRITE(mcbsp, RCR1, config->rcr1); + MCBSP_WRITE(mcbsp, XCR2, config->xcr2); + MCBSP_WRITE(mcbsp, XCR1, config->xcr1); + MCBSP_WRITE(mcbsp, SRGR2, config->srgr2); + MCBSP_WRITE(mcbsp, SRGR1, config->srgr1); + MCBSP_WRITE(mcbsp, MCR2, config->mcr2); + MCBSP_WRITE(mcbsp, MCR1, config->mcr1); + MCBSP_WRITE(mcbsp, PCR0, config->pcr0); + if (mcbsp->pdata->has_ccr) { + MCBSP_WRITE(mcbsp, XCCR, config->xccr); + MCBSP_WRITE(mcbsp, RCCR, config->rccr); + } + /* Enable wakeup behavior */ + if (mcbsp->pdata->has_wakeup) + MCBSP_WRITE(mcbsp, WAKEUPEN, XRDYEN | RRDYEN); + + /* Enable TX/RX sync error interrupts by default */ + if (mcbsp->irq) + MCBSP_WRITE(mcbsp, IRQEN, RSYNCERREN | XSYNCERREN | + RUNDFLEN | ROVFLEN | XUNDFLEN | XOVFLEN); +} + +/** + * omap_mcbsp_dma_reg_params - returns the address of mcbsp data register + * @mcbsp: omap_mcbsp struct for the McBSP instance + * @stream: Stream direction (playback/capture) + * + * Returns the address of mcbsp data transmit register or data receive register + * to be used by DMA for transferring/receiving data + */ +static int omap_mcbsp_dma_reg_params(struct omap_mcbsp *mcbsp, + unsigned int stream) +{ + int data_reg; + + if (stream == SNDRV_PCM_STREAM_PLAYBACK) { + if (mcbsp->pdata->reg_size == 2) + data_reg = OMAP_MCBSP_REG_DXR1; + else + data_reg = OMAP_MCBSP_REG_DXR; + } else { + if (mcbsp->pdata->reg_size == 2) + data_reg = OMAP_MCBSP_REG_DRR1; + else + data_reg = OMAP_MCBSP_REG_DRR; + } + + return mcbsp->phys_dma_base + data_reg * mcbsp->pdata->reg_step; +} + +/* + * omap_mcbsp_set_rx_threshold configures the transmit threshold in words. + * The threshold parameter is 1 based, and it is converted (threshold - 1) + * for the THRSH2 register. + */ +static void omap_mcbsp_set_tx_threshold(struct omap_mcbsp *mcbsp, u16 threshold) +{ + if (threshold && threshold <= mcbsp->max_tx_thres) + MCBSP_WRITE(mcbsp, THRSH2, threshold - 1); +} + +/* + * omap_mcbsp_set_rx_threshold configures the receive threshold in words. + * The threshold parameter is 1 based, and it is converted (threshold - 1) + * for the THRSH1 register. + */ +static void omap_mcbsp_set_rx_threshold(struct omap_mcbsp *mcbsp, u16 threshold) +{ + if (threshold && threshold <= mcbsp->max_rx_thres) + MCBSP_WRITE(mcbsp, THRSH1, threshold - 1); +} + +/* + * omap_mcbsp_get_tx_delay returns the number of used slots in the McBSP FIFO + */ +static u16 omap_mcbsp_get_tx_delay(struct omap_mcbsp *mcbsp) +{ + u16 buffstat; + + /* Returns the number of free locations in the buffer */ + buffstat = MCBSP_READ(mcbsp, XBUFFSTAT); + + /* Number of slots are different in McBSP ports */ + return mcbsp->pdata->buffer_size - buffstat; +} + +/* + * omap_mcbsp_get_rx_delay returns the number of free slots in the McBSP FIFO + * to reach the threshold value (when the DMA will be triggered to read it) + */ +static u16 omap_mcbsp_get_rx_delay(struct omap_mcbsp *mcbsp) +{ + u16 buffstat, threshold; + + /* Returns the number of used locations in the buffer */ + buffstat = MCBSP_READ(mcbsp, RBUFFSTAT); + /* RX threshold */ + threshold = MCBSP_READ(mcbsp, THRSH1); + + /* Return the number of location till we reach the threshold limit */ + if (threshold <= buffstat) + return 0; + else + return threshold - buffstat; +} + +static int omap_mcbsp_request(struct omap_mcbsp *mcbsp) +{ + void *reg_cache; + int err; + + reg_cache = kzalloc(mcbsp->reg_cache_size, GFP_KERNEL); + if (!reg_cache) + return -ENOMEM; + + spin_lock(&mcbsp->lock); + if (!mcbsp->free) { + dev_err(mcbsp->dev, "McBSP%d is currently in use\n", mcbsp->id); + err = -EBUSY; + goto err_kfree; + } + + mcbsp->free = false; + mcbsp->reg_cache = reg_cache; + spin_unlock(&mcbsp->lock); + + if(mcbsp->pdata->ops && mcbsp->pdata->ops->request) + mcbsp->pdata->ops->request(mcbsp->id - 1); + + /* + * Make sure that transmitter, receiver and sample-rate generator are + * not running before activating IRQs. + */ + MCBSP_WRITE(mcbsp, SPCR1, 0); + MCBSP_WRITE(mcbsp, SPCR2, 0); + + if (mcbsp->irq) { + err = request_irq(mcbsp->irq, omap_mcbsp_irq_handler, 0, + "McBSP", (void *)mcbsp); + if (err != 0) { + dev_err(mcbsp->dev, "Unable to request IRQ\n"); + goto err_clk_disable; + } + } else { + err = request_irq(mcbsp->tx_irq, omap_mcbsp_tx_irq_handler, 0, + "McBSP TX", (void *)mcbsp); + if (err != 0) { + dev_err(mcbsp->dev, "Unable to request TX IRQ\n"); + goto err_clk_disable; + } + + err = request_irq(mcbsp->rx_irq, omap_mcbsp_rx_irq_handler, 0, + "McBSP RX", (void *)mcbsp); + if (err != 0) { + dev_err(mcbsp->dev, "Unable to request RX IRQ\n"); + goto err_free_irq; + } + } + + return 0; +err_free_irq: + free_irq(mcbsp->tx_irq, (void *)mcbsp); +err_clk_disable: + if(mcbsp->pdata->ops && mcbsp->pdata->ops->free) + mcbsp->pdata->ops->free(mcbsp->id - 1); + + /* Disable wakeup behavior */ + if (mcbsp->pdata->has_wakeup) + MCBSP_WRITE(mcbsp, WAKEUPEN, 0); + + spin_lock(&mcbsp->lock); + mcbsp->free = true; + mcbsp->reg_cache = NULL; +err_kfree: + spin_unlock(&mcbsp->lock); + kfree(reg_cache); + + return err; +} + +static void omap_mcbsp_free(struct omap_mcbsp *mcbsp) +{ + void *reg_cache; + + if(mcbsp->pdata->ops && mcbsp->pdata->ops->free) + mcbsp->pdata->ops->free(mcbsp->id - 1); + + /* Disable wakeup behavior */ + if (mcbsp->pdata->has_wakeup) + MCBSP_WRITE(mcbsp, WAKEUPEN, 0); + + /* Disable interrupt requests */ + if (mcbsp->irq) { + MCBSP_WRITE(mcbsp, IRQEN, 0); + + free_irq(mcbsp->irq, (void *)mcbsp); + } else { + free_irq(mcbsp->rx_irq, (void *)mcbsp); + free_irq(mcbsp->tx_irq, (void *)mcbsp); + } + + reg_cache = mcbsp->reg_cache; + + /* + * Select CLKS source from internal source unconditionally before + * marking the McBSP port as free. + * If the external clock source via MCBSP_CLKS pin has been selected the + * system will refuse to enter idle if the CLKS pin source is not reset + * back to internal source. + */ + if (!mcbsp_omap1()) + omap2_mcbsp_set_clks_src(mcbsp, MCBSP_CLKS_PRCM_SRC); + + spin_lock(&mcbsp->lock); + if (mcbsp->free) + dev_err(mcbsp->dev, "McBSP%d was not reserved\n", mcbsp->id); + else + mcbsp->free = true; + mcbsp->reg_cache = NULL; + spin_unlock(&mcbsp->lock); + + kfree(reg_cache); +} + +/* + * Here we start the McBSP, by enabling transmitter, receiver or both. + * If no transmitter or receiver is active prior calling, then sample-rate + * generator and frame sync are started. + */ +static void omap_mcbsp_start(struct omap_mcbsp *mcbsp, int stream) +{ + int tx = (stream == SNDRV_PCM_STREAM_PLAYBACK); + int rx = !tx; + int enable_srg = 0; + u16 w; + + if (mcbsp->st_data) + omap_mcbsp_st_start(mcbsp); + + /* Only enable SRG, if McBSP is master */ + w = MCBSP_READ_CACHE(mcbsp, PCR0); + if (w & (FSXM | FSRM | CLKXM | CLKRM)) + enable_srg = !((MCBSP_READ_CACHE(mcbsp, SPCR2) | + MCBSP_READ_CACHE(mcbsp, SPCR1)) & 1); + + if (enable_srg) { + /* Start the sample generator */ + w = MCBSP_READ_CACHE(mcbsp, SPCR2); + MCBSP_WRITE(mcbsp, SPCR2, w | (1 << 6)); + } + + /* Enable transmitter and receiver */ + tx &= 1; + w = MCBSP_READ_CACHE(mcbsp, SPCR2); + MCBSP_WRITE(mcbsp, SPCR2, w | tx); + + rx &= 1; + w = MCBSP_READ_CACHE(mcbsp, SPCR1); + MCBSP_WRITE(mcbsp, SPCR1, w | rx); + + /* + * Worst case: CLKSRG*2 = 8000khz: (1/8000) * 2 * 2 usec + * REVISIT: 100us may give enough time for two CLKSRG, however + * due to some unknown PM related, clock gating etc. reason it + * is now at 500us. + */ + udelay(500); + + if (enable_srg) { + /* Start frame sync */ + w = MCBSP_READ_CACHE(mcbsp, SPCR2); + MCBSP_WRITE(mcbsp, SPCR2, w | (1 << 7)); + } + + if (mcbsp->pdata->has_ccr) { + /* Release the transmitter and receiver */ + w = MCBSP_READ_CACHE(mcbsp, XCCR); + w &= ~(tx ? XDISABLE : 0); + MCBSP_WRITE(mcbsp, XCCR, w); + w = MCBSP_READ_CACHE(mcbsp, RCCR); + w &= ~(rx ? RDISABLE : 0); + MCBSP_WRITE(mcbsp, RCCR, w); + } + + /* Dump McBSP Regs */ + omap_mcbsp_dump_reg(mcbsp); +} + +static void omap_mcbsp_stop(struct omap_mcbsp *mcbsp, int stream) +{ + int tx = (stream == SNDRV_PCM_STREAM_PLAYBACK); + int rx = !tx; + int idle; + u16 w; + + /* Reset transmitter */ + tx &= 1; + if (mcbsp->pdata->has_ccr) { + w = MCBSP_READ_CACHE(mcbsp, XCCR); + w |= (tx ? XDISABLE : 0); + MCBSP_WRITE(mcbsp, XCCR, w); + } + w = MCBSP_READ_CACHE(mcbsp, SPCR2); + MCBSP_WRITE(mcbsp, SPCR2, w & ~tx); + + /* Reset receiver */ + rx &= 1; + if (mcbsp->pdata->has_ccr) { + w = MCBSP_READ_CACHE(mcbsp, RCCR); + w |= (rx ? RDISABLE : 0); + MCBSP_WRITE(mcbsp, RCCR, w); + } + w = MCBSP_READ_CACHE(mcbsp, SPCR1); + MCBSP_WRITE(mcbsp, SPCR1, w & ~rx); + + idle = !((MCBSP_READ_CACHE(mcbsp, SPCR2) | + MCBSP_READ_CACHE(mcbsp, SPCR1)) & 1); + + if (idle) { + /* Reset the sample rate generator */ + w = MCBSP_READ_CACHE(mcbsp, SPCR2); + MCBSP_WRITE(mcbsp, SPCR2, w & ~(1 << 6)); + } + + if (mcbsp->st_data) + omap_mcbsp_st_stop(mcbsp); +} + +#define max_thres(m) (mcbsp->pdata->buffer_size) +#define valid_threshold(m, val) ((val) <= max_thres(m)) +#define THRESHOLD_PROP_BUILDER(prop) \ +static ssize_t prop##_show(struct device *dev, \ + struct device_attribute *attr, char *buf) \ +{ \ + struct omap_mcbsp *mcbsp = dev_get_drvdata(dev); \ + \ + return sysfs_emit(buf, "%u\n", mcbsp->prop); \ +} \ + \ +static ssize_t prop##_store(struct device *dev, \ + struct device_attribute *attr, \ + const char *buf, size_t size) \ +{ \ + struct omap_mcbsp *mcbsp = dev_get_drvdata(dev); \ + unsigned long val; \ + int status; \ + \ + status = kstrtoul(buf, 0, &val); \ + if (status) \ + return status; \ + \ + if (!valid_threshold(mcbsp, val)) \ + return -EDOM; \ + \ + mcbsp->prop = val; \ + return size; \ +} \ + \ +static DEVICE_ATTR_RW(prop) + +THRESHOLD_PROP_BUILDER(max_tx_thres); +THRESHOLD_PROP_BUILDER(max_rx_thres); + +static const char * const dma_op_modes[] = { + "element", "threshold", +}; + +static ssize_t dma_op_mode_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct omap_mcbsp *mcbsp = dev_get_drvdata(dev); + int dma_op_mode, i = 0; + ssize_t len = 0; + const char * const *s; + + dma_op_mode = mcbsp->dma_op_mode; + + for (s = &dma_op_modes[i]; i < ARRAY_SIZE(dma_op_modes); s++, i++) { + if (dma_op_mode == i) + len += sysfs_emit_at(buf, len, "[%s] ", *s); + else + len += sysfs_emit_at(buf, len, "%s ", *s); + } + len += sysfs_emit_at(buf, len, "\n"); + + return len; +} + +static ssize_t dma_op_mode_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t size) +{ + struct omap_mcbsp *mcbsp = dev_get_drvdata(dev); + int i; + + i = sysfs_match_string(dma_op_modes, buf); + if (i < 0) + return i; + + spin_lock_irq(&mcbsp->lock); + if (!mcbsp->free) { + size = -EBUSY; + goto unlock; + } + mcbsp->dma_op_mode = i; + +unlock: + spin_unlock_irq(&mcbsp->lock); + + return size; +} + +static DEVICE_ATTR_RW(dma_op_mode); + +static const struct attribute *additional_attrs[] = { + &dev_attr_max_tx_thres.attr, + &dev_attr_max_rx_thres.attr, + &dev_attr_dma_op_mode.attr, + NULL, +}; + +static const struct attribute_group additional_attr_group = { + .attrs = (struct attribute **)additional_attrs, +}; + +/* + * McBSP1 and McBSP3 are directly mapped on 1610 and 1510. + * 730 has only 2 McBSP, and both of them are MPU peripherals. + */ +static int omap_mcbsp_init(struct platform_device *pdev) +{ + struct omap_mcbsp *mcbsp = platform_get_drvdata(pdev); + struct resource *res; + int ret; + + spin_lock_init(&mcbsp->lock); + mcbsp->free = true; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mpu"); + if (!res) + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + mcbsp->io_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(mcbsp->io_base)) + return PTR_ERR(mcbsp->io_base); + + mcbsp->phys_base = res->start; + mcbsp->reg_cache_size = resource_size(res); + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dma"); + if (!res) + mcbsp->phys_dma_base = mcbsp->phys_base; + else + mcbsp->phys_dma_base = res->start; + + /* + * OMAP1, 2 uses two interrupt lines: TX, RX + * OMAP2430, OMAP3 SoC have combined IRQ line as well. + * OMAP4 and newer SoC only have the combined IRQ line. + * Use the combined IRQ if available since it gives better debugging + * possibilities. + */ + mcbsp->irq = platform_get_irq_byname(pdev, "common"); + if (mcbsp->irq == -ENXIO) { + mcbsp->tx_irq = platform_get_irq_byname(pdev, "tx"); + + if (mcbsp->tx_irq == -ENXIO) { + mcbsp->irq = platform_get_irq(pdev, 0); + mcbsp->tx_irq = 0; + } else { + mcbsp->rx_irq = platform_get_irq_byname(pdev, "rx"); + mcbsp->irq = 0; + } + } + + if (!pdev->dev.of_node) { + res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx"); + if (!res) { + dev_err(&pdev->dev, "invalid tx DMA channel\n"); + return -ENODEV; + } + mcbsp->dma_req[0] = res->start; + mcbsp->dma_data[0].filter_data = &mcbsp->dma_req[0]; + + res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx"); + if (!res) { + dev_err(&pdev->dev, "invalid rx DMA channel\n"); + return -ENODEV; + } + mcbsp->dma_req[1] = res->start; + mcbsp->dma_data[1].filter_data = &mcbsp->dma_req[1]; + } else { + mcbsp->dma_data[0].filter_data = "tx"; + mcbsp->dma_data[1].filter_data = "rx"; + } + + mcbsp->dma_data[0].addr = omap_mcbsp_dma_reg_params(mcbsp, + SNDRV_PCM_STREAM_PLAYBACK); + mcbsp->dma_data[1].addr = omap_mcbsp_dma_reg_params(mcbsp, + SNDRV_PCM_STREAM_CAPTURE); + + mcbsp->fclk = devm_clk_get(&pdev->dev, "fck"); + if (IS_ERR(mcbsp->fclk)) { + ret = PTR_ERR(mcbsp->fclk); + dev_err(mcbsp->dev, "unable to get fck: %d\n", ret); + return ret; + } + + mcbsp->dma_op_mode = MCBSP_DMA_MODE_ELEMENT; + if (mcbsp->pdata->buffer_size) { + /* + * Initially configure the maximum thresholds to a safe value. + * The McBSP FIFO usage with these values should not go under + * 16 locations. + * If the whole FIFO without safety buffer is used, than there + * is a possibility that the DMA will be not able to push the + * new data on time, causing channel shifts in runtime. + */ + mcbsp->max_tx_thres = max_thres(mcbsp) - 0x10; + mcbsp->max_rx_thres = max_thres(mcbsp) - 0x10; + + ret = devm_device_add_group(mcbsp->dev, &additional_attr_group); + if (ret) { + dev_err(mcbsp->dev, + "Unable to create additional controls\n"); + return ret; + } + } + + return omap_mcbsp_st_init(pdev); +} + +/* + * Stream DMA parameters. DMA request line and port address are set runtime + * since they are different between OMAP1 and later OMAPs + */ +static void omap_mcbsp_set_threshold(struct snd_pcm_substream *substream, + unsigned int packet_size) +{ + struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream); + struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0); + struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(cpu_dai); + int words; + + /* No need to proceed further if McBSP does not have FIFO */ + if (mcbsp->pdata->buffer_size == 0) + return; + + /* + * Configure McBSP threshold based on either: + * packet_size, when the sDMA is in packet mode, or based on the + * period size in THRESHOLD mode, otherwise use McBSP threshold = 1 + * for mono streams. + */ + if (packet_size) + words = packet_size; + else + words = 1; + + /* Configure McBSP internal buffer usage */ + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + omap_mcbsp_set_tx_threshold(mcbsp, words); + else + omap_mcbsp_set_rx_threshold(mcbsp, words); +} + +static int omap_mcbsp_hwrule_min_buffersize(struct snd_pcm_hw_params *params, + struct snd_pcm_hw_rule *rule) +{ + struct snd_interval *buffer_size = hw_param_interval(params, + SNDRV_PCM_HW_PARAM_BUFFER_SIZE); + struct snd_interval *channels = hw_param_interval(params, + SNDRV_PCM_HW_PARAM_CHANNELS); + struct omap_mcbsp *mcbsp = rule->private; + struct snd_interval frames; + int size; + + snd_interval_any(&frames); + size = mcbsp->pdata->buffer_size; + + frames.min = size / channels->min; + frames.integer = 1; + return snd_interval_refine(buffer_size, &frames); +} + +static int omap_mcbsp_dai_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *cpu_dai) +{ + struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(cpu_dai); + int err = 0; + + if (!snd_soc_dai_active(cpu_dai)) + err = omap_mcbsp_request(mcbsp); + + /* + * OMAP3 McBSP FIFO is word structured. + * McBSP2 has 1024 + 256 = 1280 word long buffer, + * McBSP1,3,4,5 has 128 word long buffer + * This means that the size of the FIFO depends on the sample format. + * For example on McBSP3: + * 16bit samples: size is 128 * 2 = 256 bytes + * 32bit samples: size is 128 * 4 = 512 bytes + * It is simpler to place constraint for buffer and period based on + * channels. + * McBSP3 as example again (16 or 32 bit samples): + * 1 channel (mono): size is 128 frames (128 words) + * 2 channels (stereo): size is 128 / 2 = 64 frames (2 * 64 words) + * 4 channels: size is 128 / 4 = 32 frames (4 * 32 words) + */ + if (mcbsp->pdata->buffer_size) { + /* + * Rule for the buffer size. We should not allow + * smaller buffer than the FIFO size to avoid underruns. + * This applies only for the playback stream. + */ + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + snd_pcm_hw_rule_add(substream->runtime, 0, + SNDRV_PCM_HW_PARAM_BUFFER_SIZE, + omap_mcbsp_hwrule_min_buffersize, + mcbsp, + SNDRV_PCM_HW_PARAM_CHANNELS, -1); + + /* Make sure, that the period size is always even */ + snd_pcm_hw_constraint_step(substream->runtime, 0, + SNDRV_PCM_HW_PARAM_PERIOD_SIZE, 2); + } + + return err; +} + +static void omap_mcbsp_dai_shutdown(struct snd_pcm_substream *substream, + struct snd_soc_dai *cpu_dai) +{ + struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(cpu_dai); + int tx = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK); + int stream1 = tx ? SNDRV_PCM_STREAM_PLAYBACK : SNDRV_PCM_STREAM_CAPTURE; + int stream2 = tx ? SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK; + + if (mcbsp->latency[stream2]) + cpu_latency_qos_update_request(&mcbsp->pm_qos_req, + mcbsp->latency[stream2]); + else if (mcbsp->latency[stream1]) + cpu_latency_qos_remove_request(&mcbsp->pm_qos_req); + + mcbsp->latency[stream1] = 0; + + if (!snd_soc_dai_active(cpu_dai)) { + omap_mcbsp_free(mcbsp); + mcbsp->configured = 0; + } +} + +static int omap_mcbsp_dai_prepare(struct snd_pcm_substream *substream, + struct snd_soc_dai *cpu_dai) +{ + struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(cpu_dai); + struct pm_qos_request *pm_qos_req = &mcbsp->pm_qos_req; + int tx = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK); + int stream1 = tx ? SNDRV_PCM_STREAM_PLAYBACK : SNDRV_PCM_STREAM_CAPTURE; + int stream2 = tx ? SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK; + int latency = mcbsp->latency[stream2]; + + /* Prevent omap hardware from hitting off between FIFO fills */ + if (!latency || mcbsp->latency[stream1] < latency) + latency = mcbsp->latency[stream1]; + + if (cpu_latency_qos_request_active(pm_qos_req)) + cpu_latency_qos_update_request(pm_qos_req, latency); + else if (latency) + cpu_latency_qos_add_request(pm_qos_req, latency); + + return 0; +} + +static int omap_mcbsp_dai_trigger(struct snd_pcm_substream *substream, int cmd, + struct snd_soc_dai *cpu_dai) +{ + struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(cpu_dai); + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + mcbsp->active++; + omap_mcbsp_start(mcbsp, substream->stream); + break; + + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_SUSPEND: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + omap_mcbsp_stop(mcbsp, substream->stream); + mcbsp->active--; + break; + default: + return -EINVAL; + } + + return 0; +} + +static snd_pcm_sframes_t omap_mcbsp_dai_delay( + struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream); + struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0); + struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(cpu_dai); + u16 fifo_use; + snd_pcm_sframes_t delay; + + /* No need to proceed further if McBSP does not have FIFO */ + if (mcbsp->pdata->buffer_size == 0) + return 0; + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + fifo_use = omap_mcbsp_get_tx_delay(mcbsp); + else + fifo_use = omap_mcbsp_get_rx_delay(mcbsp); + + /* + * Divide the used locations with the channel count to get the + * FIFO usage in samples (don't care about partial samples in the + * buffer). + */ + delay = fifo_use / substream->runtime->channels; + + return delay; +} + +static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *cpu_dai) +{ + struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(cpu_dai); + struct omap_mcbsp_reg_cfg *regs = &mcbsp->cfg_regs; + struct snd_dmaengine_dai_dma_data *dma_data; + int wlen, channels, wpf; + int pkt_size = 0; + unsigned int format, div, framesize, master; + unsigned int buffer_size = mcbsp->pdata->buffer_size; + + dma_data = snd_soc_dai_get_dma_data(cpu_dai, substream); + channels = params_channels(params); + + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + wlen = 16; + break; + case SNDRV_PCM_FORMAT_S32_LE: + wlen = 32; + break; + default: + return -EINVAL; + } + if (buffer_size) { + int latency; + + if (mcbsp->dma_op_mode == MCBSP_DMA_MODE_THRESHOLD) { + int period_words, max_thrsh; + int divider = 0; + + period_words = params_period_bytes(params) / (wlen / 8); + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + max_thrsh = mcbsp->max_tx_thres; + else + max_thrsh = mcbsp->max_rx_thres; + /* + * Use sDMA packet mode if McBSP is in threshold mode: + * If period words less than the FIFO size the packet + * size is set to the number of period words, otherwise + * Look for the biggest threshold value which divides + * the period size evenly. + */ + divider = period_words / max_thrsh; + if (period_words % max_thrsh) + divider++; + while (period_words % divider && + divider < period_words) + divider++; + if (divider == period_words) + return -EINVAL; + + pkt_size = period_words / divider; + } else if (channels > 1) { + /* Use packet mode for non mono streams */ + pkt_size = channels; + } + + latency = (buffer_size - pkt_size) / channels; + latency = latency * USEC_PER_SEC / + (params->rate_num / params->rate_den); + mcbsp->latency[substream->stream] = latency; + + omap_mcbsp_set_threshold(substream, pkt_size); + } + + dma_data->maxburst = pkt_size; + + if (mcbsp->configured) { + /* McBSP already configured by another stream */ + return 0; + } + + regs->rcr2 &= ~(RPHASE | RFRLEN2(0x7f) | RWDLEN2(7)); + regs->xcr2 &= ~(RPHASE | XFRLEN2(0x7f) | XWDLEN2(7)); + regs->rcr1 &= ~(RFRLEN1(0x7f) | RWDLEN1(7)); + regs->xcr1 &= ~(XFRLEN1(0x7f) | XWDLEN1(7)); + format = mcbsp->fmt & SND_SOC_DAIFMT_FORMAT_MASK; + wpf = channels; + if (channels == 2 && (format == SND_SOC_DAIFMT_I2S || + format == SND_SOC_DAIFMT_LEFT_J)) { + /* Use dual-phase frames */ + regs->rcr2 |= RPHASE; + regs->xcr2 |= XPHASE; + /* Set 1 word per (McBSP) frame for phase1 and phase2 */ + wpf--; + regs->rcr2 |= RFRLEN2(wpf - 1); + regs->xcr2 |= XFRLEN2(wpf - 1); + } + + regs->rcr1 |= RFRLEN1(wpf - 1); + regs->xcr1 |= XFRLEN1(wpf - 1); + + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + /* Set word lengths */ + regs->rcr2 |= RWDLEN2(OMAP_MCBSP_WORD_16); + regs->rcr1 |= RWDLEN1(OMAP_MCBSP_WORD_16); + regs->xcr2 |= XWDLEN2(OMAP_MCBSP_WORD_16); + regs->xcr1 |= XWDLEN1(OMAP_MCBSP_WORD_16); + break; + case SNDRV_PCM_FORMAT_S32_LE: + /* Set word lengths */ + regs->rcr2 |= RWDLEN2(OMAP_MCBSP_WORD_32); + regs->rcr1 |= RWDLEN1(OMAP_MCBSP_WORD_32); + regs->xcr2 |= XWDLEN2(OMAP_MCBSP_WORD_32); + regs->xcr1 |= XWDLEN1(OMAP_MCBSP_WORD_32); + break; + default: + /* Unsupported PCM format */ + return -EINVAL; + } + + /* In McBSP master modes, FRAME (i.e. sample rate) is generated + * by _counting_ BCLKs. Calculate frame size in BCLKs */ + master = mcbsp->fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK; + if (master == SND_SOC_DAIFMT_BP_FP) { + div = mcbsp->clk_div ? mcbsp->clk_div : 1; + framesize = (mcbsp->in_freq / div) / params_rate(params); + + if (framesize < wlen * channels) { + printk(KERN_ERR "%s: not enough bandwidth for desired rate and " + "channels\n", __func__); + return -EINVAL; + } + } else + framesize = wlen * channels; + + /* Set FS period and length in terms of bit clock periods */ + regs->srgr2 &= ~FPER(0xfff); + regs->srgr1 &= ~FWID(0xff); + switch (format) { + case SND_SOC_DAIFMT_I2S: + case SND_SOC_DAIFMT_LEFT_J: + regs->srgr2 |= FPER(framesize - 1); + regs->srgr1 |= FWID((framesize >> 1) - 1); + break; + case SND_SOC_DAIFMT_DSP_A: + case SND_SOC_DAIFMT_DSP_B: + regs->srgr2 |= FPER(framesize - 1); + regs->srgr1 |= FWID(0); + break; + } + + omap_mcbsp_config(mcbsp, &mcbsp->cfg_regs); + mcbsp->wlen = wlen; + mcbsp->configured = 1; + + return 0; +} + +/* + * This must be called before _set_clkdiv and _set_sysclk since McBSP register + * cache is initialized here + */ +static int omap_mcbsp_dai_set_dai_fmt(struct snd_soc_dai *cpu_dai, + unsigned int fmt) +{ + struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(cpu_dai); + struct omap_mcbsp_reg_cfg *regs = &mcbsp->cfg_regs; + bool inv_fs = false; + + if (mcbsp->configured) + return 0; + + mcbsp->fmt = fmt; + memset(regs, 0, sizeof(*regs)); + /* Generic McBSP register settings */ + regs->spcr2 |= XINTM(3) | FREE; + regs->spcr1 |= RINTM(3); + /* RFIG and XFIG are not defined in 2430 and on OMAP3+ */ + if (!mcbsp->pdata->has_ccr) { + regs->rcr2 |= RFIG; + regs->xcr2 |= XFIG; + } + + /* Configure XCCR/RCCR only for revisions which have ccr registers */ + if (mcbsp->pdata->has_ccr) { + regs->xccr = DXENDLY(1) | XDMAEN | XDISABLE; + regs->rccr = RFULL_CYCLE | RDMAEN | RDISABLE; + } + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + /* 1-bit data delay */ + regs->rcr2 |= RDATDLY(1); + regs->xcr2 |= XDATDLY(1); + break; + case SND_SOC_DAIFMT_LEFT_J: + /* 0-bit data delay */ + regs->rcr2 |= RDATDLY(0); + regs->xcr2 |= XDATDLY(0); + regs->spcr1 |= RJUST(2); + /* Invert FS polarity configuration */ + inv_fs = true; + break; + case SND_SOC_DAIFMT_DSP_A: + /* 1-bit data delay */ + regs->rcr2 |= RDATDLY(1); + regs->xcr2 |= XDATDLY(1); + /* Invert FS polarity configuration */ + inv_fs = true; + break; + case SND_SOC_DAIFMT_DSP_B: + /* 0-bit data delay */ + regs->rcr2 |= RDATDLY(0); + regs->xcr2 |= XDATDLY(0); + /* Invert FS polarity configuration */ + inv_fs = true; + break; + default: + /* Unsupported data format */ + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK) { + case SND_SOC_DAIFMT_BP_FP: + /* McBSP master. Set FS and bit clocks as outputs */ + regs->pcr0 |= FSXM | FSRM | + CLKXM | CLKRM; + /* Sample rate generator drives the FS */ + regs->srgr2 |= FSGM; + break; + case SND_SOC_DAIFMT_BC_FP: + /* McBSP slave. FS clock as output */ + regs->srgr2 |= FSGM; + regs->pcr0 |= FSXM | FSRM; + break; + case SND_SOC_DAIFMT_BC_FC: + /* McBSP slave */ + break; + default: + /* Unsupported master/slave configuration */ + return -EINVAL; + } + + /* Set bit clock (CLKX/CLKR) and FS polarities */ + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + /* + * Normal BCLK + FS. + * FS active low. TX data driven on falling edge of bit clock + * and RX data sampled on rising edge of bit clock. + */ + regs->pcr0 |= FSXP | FSRP | + CLKXP | CLKRP; + break; + case SND_SOC_DAIFMT_NB_IF: + regs->pcr0 |= CLKXP | CLKRP; + break; + case SND_SOC_DAIFMT_IB_NF: + regs->pcr0 |= FSXP | FSRP; + break; + case SND_SOC_DAIFMT_IB_IF: + break; + default: + return -EINVAL; + } + if (inv_fs) + regs->pcr0 ^= FSXP | FSRP; + + return 0; +} + +static int omap_mcbsp_dai_set_clkdiv(struct snd_soc_dai *cpu_dai, + int div_id, int div) +{ + struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(cpu_dai); + struct omap_mcbsp_reg_cfg *regs = &mcbsp->cfg_regs; + + if (div_id != OMAP_MCBSP_CLKGDV) + return -ENODEV; + + mcbsp->clk_div = div; + regs->srgr1 &= ~CLKGDV(0xff); + regs->srgr1 |= CLKGDV(div - 1); + + return 0; +} + +static int omap_mcbsp_dai_set_dai_sysclk(struct snd_soc_dai *cpu_dai, + int clk_id, unsigned int freq, + int dir) +{ + struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(cpu_dai); + struct omap_mcbsp_reg_cfg *regs = &mcbsp->cfg_regs; + int err = 0; + + if (mcbsp->active) { + if (freq == mcbsp->in_freq) + return 0; + else + return -EBUSY; + } + + mcbsp->in_freq = freq; + regs->srgr2 &= ~CLKSM; + regs->pcr0 &= ~SCLKME; + + switch (clk_id) { + case OMAP_MCBSP_SYSCLK_CLK: + regs->srgr2 |= CLKSM; + break; + case OMAP_MCBSP_SYSCLK_CLKS_FCLK: + if (mcbsp_omap1()) { + err = -EINVAL; + break; + } + err = omap2_mcbsp_set_clks_src(mcbsp, + MCBSP_CLKS_PRCM_SRC); + break; + case OMAP_MCBSP_SYSCLK_CLKS_EXT: + if (mcbsp_omap1()) { + err = 0; + break; + } + err = omap2_mcbsp_set_clks_src(mcbsp, + MCBSP_CLKS_PAD_SRC); + break; + + case OMAP_MCBSP_SYSCLK_CLKX_EXT: + regs->srgr2 |= CLKSM; + regs->pcr0 |= SCLKME; + /* + * If McBSP is master but yet the CLKX/CLKR pin drives the SRG, + * disable output on those pins. This enables to inject the + * reference clock through CLKX/CLKR. For this to work + * set_dai_sysclk() _needs_ to be called after set_dai_fmt(). + */ + regs->pcr0 &= ~CLKXM; + break; + case OMAP_MCBSP_SYSCLK_CLKR_EXT: + regs->pcr0 |= SCLKME; + /* Disable ouput on CLKR pin in master mode */ + regs->pcr0 &= ~CLKRM; + break; + default: + err = -ENODEV; + } + + return err; +} + +static int omap_mcbsp_probe(struct snd_soc_dai *dai) +{ + struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(dai); + + pm_runtime_enable(mcbsp->dev); + + snd_soc_dai_init_dma_data(dai, + &mcbsp->dma_data[SNDRV_PCM_STREAM_PLAYBACK], + &mcbsp->dma_data[SNDRV_PCM_STREAM_CAPTURE]); + + return 0; +} + +static int omap_mcbsp_remove(struct snd_soc_dai *dai) +{ + struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(dai); + + pm_runtime_disable(mcbsp->dev); + + return 0; +} + +static const struct snd_soc_dai_ops mcbsp_dai_ops = { + .probe = omap_mcbsp_probe, + .remove = omap_mcbsp_remove, + .startup = omap_mcbsp_dai_startup, + .shutdown = omap_mcbsp_dai_shutdown, + .prepare = omap_mcbsp_dai_prepare, + .trigger = omap_mcbsp_dai_trigger, + .delay = omap_mcbsp_dai_delay, + .hw_params = omap_mcbsp_dai_hw_params, + .set_fmt = omap_mcbsp_dai_set_dai_fmt, + .set_clkdiv = omap_mcbsp_dai_set_clkdiv, + .set_sysclk = omap_mcbsp_dai_set_dai_sysclk, +}; + +static struct snd_soc_dai_driver omap_mcbsp_dai = { + .playback = { + .channels_min = 1, + .channels_max = 16, + .rates = OMAP_MCBSP_RATES, + .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE, + }, + .capture = { + .channels_min = 1, + .channels_max = 16, + .rates = OMAP_MCBSP_RATES, + .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE, + }, + .ops = &mcbsp_dai_ops, +}; + +static const struct snd_soc_component_driver omap_mcbsp_component = { + .name = "omap-mcbsp", + .legacy_dai_naming = 1, +}; + +static struct omap_mcbsp_platform_data omap2420_pdata = { + .reg_step = 4, + .reg_size = 2, +}; + +static struct omap_mcbsp_platform_data omap2430_pdata = { + .reg_step = 4, + .reg_size = 4, + .has_ccr = true, +}; + +static struct omap_mcbsp_platform_data omap3_pdata = { + .reg_step = 4, + .reg_size = 4, + .has_ccr = true, + .has_wakeup = true, +}; + +static struct omap_mcbsp_platform_data omap4_pdata = { + .reg_step = 4, + .reg_size = 4, + .has_ccr = true, + .has_wakeup = true, +}; + +static const struct of_device_id omap_mcbsp_of_match[] = { + { + .compatible = "ti,omap2420-mcbsp", + .data = &omap2420_pdata, + }, + { + .compatible = "ti,omap2430-mcbsp", + .data = &omap2430_pdata, + }, + { + .compatible = "ti,omap3-mcbsp", + .data = &omap3_pdata, + }, + { + .compatible = "ti,omap4-mcbsp", + .data = &omap4_pdata, + }, + { }, +}; +MODULE_DEVICE_TABLE(of, omap_mcbsp_of_match); + +static int asoc_mcbsp_probe(struct platform_device *pdev) +{ + struct omap_mcbsp_platform_data *pdata = dev_get_platdata(&pdev->dev); + struct omap_mcbsp *mcbsp; + const struct of_device_id *match; + int ret; + + match = of_match_device(omap_mcbsp_of_match, &pdev->dev); + if (match) { + struct device_node *node = pdev->dev.of_node; + struct omap_mcbsp_platform_data *pdata_quirk = pdata; + int buffer_size; + + pdata = devm_kzalloc(&pdev->dev, + sizeof(struct omap_mcbsp_platform_data), + GFP_KERNEL); + if (!pdata) + return -ENOMEM; + + memcpy(pdata, match->data, sizeof(*pdata)); + if (!of_property_read_u32(node, "ti,buffer-size", &buffer_size)) + pdata->buffer_size = buffer_size; + if (pdata_quirk) + pdata->force_ick_on = pdata_quirk->force_ick_on; + } else if (!pdata) { + dev_err(&pdev->dev, "missing platform data.\n"); + return -EINVAL; + } + mcbsp = devm_kzalloc(&pdev->dev, sizeof(struct omap_mcbsp), GFP_KERNEL); + if (!mcbsp) + return -ENOMEM; + + mcbsp->id = pdev->id; + mcbsp->pdata = pdata; + mcbsp->dev = &pdev->dev; + platform_set_drvdata(pdev, mcbsp); + + ret = omap_mcbsp_init(pdev); + if (ret) + return ret; + + if (mcbsp->pdata->reg_size == 2) { + omap_mcbsp_dai.playback.formats = SNDRV_PCM_FMTBIT_S16_LE; + omap_mcbsp_dai.capture.formats = SNDRV_PCM_FMTBIT_S16_LE; + } + + ret = devm_snd_soc_register_component(&pdev->dev, + &omap_mcbsp_component, + &omap_mcbsp_dai, 1); + if (ret) + return ret; + + return sdma_pcm_platform_register(&pdev->dev, "tx", "rx"); +} + +static void asoc_mcbsp_remove(struct platform_device *pdev) +{ + struct omap_mcbsp *mcbsp = platform_get_drvdata(pdev); + + if (mcbsp->pdata->ops && mcbsp->pdata->ops->free) + mcbsp->pdata->ops->free(mcbsp->id); + + if (cpu_latency_qos_request_active(&mcbsp->pm_qos_req)) + cpu_latency_qos_remove_request(&mcbsp->pm_qos_req); +} + +static struct platform_driver asoc_mcbsp_driver = { + .driver = { + .name = "omap-mcbsp", + .of_match_table = omap_mcbsp_of_match, + }, + + .probe = asoc_mcbsp_probe, + .remove_new = asoc_mcbsp_remove, +}; + +module_platform_driver(asoc_mcbsp_driver); + +MODULE_AUTHOR("Jarkko Nikula "); +MODULE_DESCRIPTION("OMAP I2S SoC Interface"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:omap-mcbsp"); -- cgit v1.2.3