From 7f3a4257159dea8e7ef66d1a539dc6df708b8ed3 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Wed, 7 Aug 2024 15:17:46 +0200 Subject: Adding upstream version 6.10.3. Signed-off-by: Daniel Baumann --- tools/bpf/bpftool/Documentation/Makefile | 6 +- tools/bpf/bpftool/Documentation/bpftool-btf.rst | 104 +++-- tools/bpf/bpftool/Documentation/bpftool-cgroup.rst | 219 +++++------ .../bpf/bpftool/Documentation/bpftool-feature.rst | 115 +++--- tools/bpf/bpftool/Documentation/bpftool-gen.rst | 338 ++++++++-------- tools/bpf/bpftool/Documentation/bpftool-iter.rst | 60 ++- tools/bpf/bpftool/Documentation/bpftool-link.rst | 73 ++-- tools/bpf/bpftool/Documentation/bpftool-map.rst | 232 ++++++----- tools/bpf/bpftool/Documentation/bpftool-net.rst | 112 +++--- tools/bpf/bpftool/Documentation/bpftool-perf.rst | 34 +- tools/bpf/bpftool/Documentation/bpftool-prog.rst | 436 ++++++++++----------- .../bpftool/Documentation/bpftool-struct_ops.rst | 81 ++-- tools/bpf/bpftool/Documentation/bpftool.rst | 60 +-- tools/bpf/bpftool/Documentation/common_options.rst | 26 +- tools/bpf/bpftool/Makefile | 16 +- tools/bpf/bpftool/bash-completion/bpftool | 61 ++- tools/bpf/bpftool/common.c | 2 +- tools/bpf/bpftool/feature.c | 3 +- tools/bpf/bpftool/gen.c | 5 +- tools/bpf/bpftool/link.c | 9 + tools/bpf/bpftool/pids.c | 19 +- tools/bpf/bpftool/prog.c | 6 +- 22 files changed, 968 insertions(+), 1049 deletions(-) (limited to 'tools/bpf/bpftool') diff --git a/tools/bpf/bpftool/Documentation/Makefile b/tools/bpf/bpftool/Documentation/Makefile index ac8487dcff..4315652678 100644 --- a/tools/bpf/bpftool/Documentation/Makefile +++ b/tools/bpf/bpftool/Documentation/Makefile @@ -31,9 +31,9 @@ see_also = $(subst " ",, \ "\n" \ "SEE ALSO\n" \ "========\n" \ - "\t**bpf**\ (2),\n" \ - "\t**bpf-helpers**\\ (7)" \ - $(foreach page,$(call list_pages,$(1)),",\n\t**$(page)**\\ (8)") \ + "**bpf**\ (2),\n" \ + "**bpf-helpers**\\ (7)" \ + $(foreach page,$(call list_pages,$(1)),",\n**$(page)**\\ (8)") \ "\n") $(OUTPUT)%.8: %.rst diff --git a/tools/bpf/bpftool/Documentation/bpftool-btf.rst b/tools/bpf/bpftool/Documentation/bpftool-btf.rst index 342716f74e..eaba24320f 100644 --- a/tools/bpf/bpftool/Documentation/bpftool-btf.rst +++ b/tools/bpf/bpftool/Documentation/bpftool-btf.rst @@ -14,82 +14,76 @@ tool for inspection of BTF data SYNOPSIS ======== - **bpftool** [*OPTIONS*] **btf** *COMMAND* +**bpftool** [*OPTIONS*] **btf** *COMMAND* - *OPTIONS* := { |COMMON_OPTIONS| | { **-B** | **--base-btf** } } +*OPTIONS* := { |COMMON_OPTIONS| | { **-B** | **--base-btf** } } - *COMMANDS* := { **dump** | **help** } +*COMMANDS* := { **dump** | **help** } BTF COMMANDS ============= -| **bpftool** **btf** { **show** | **list** } [**id** *BTF_ID*] -| **bpftool** **btf dump** *BTF_SRC* [**format** *FORMAT*] -| **bpftool** **btf help** +| **bpftool** **btf** { **show** | **list** } [**id** *BTF_ID*] +| **bpftool** **btf dump** *BTF_SRC* [**format** *FORMAT*] +| **bpftool** **btf help** | -| *BTF_SRC* := { **id** *BTF_ID* | **prog** *PROG* | **map** *MAP* [{**key** | **value** | **kv** | **all**}] | **file** *FILE* } -| *FORMAT* := { **raw** | **c** } -| *MAP* := { **id** *MAP_ID* | **pinned** *FILE* } -| *PROG* := { **id** *PROG_ID* | **pinned** *FILE* | **tag** *PROG_TAG* } +| *BTF_SRC* := { **id** *BTF_ID* | **prog** *PROG* | **map** *MAP* [{**key** | **value** | **kv** | **all**}] | **file** *FILE* } +| *FORMAT* := { **raw** | **c** } +| *MAP* := { **id** *MAP_ID* | **pinned** *FILE* } +| *PROG* := { **id** *PROG_ID* | **pinned** *FILE* | **tag** *PROG_TAG* | **name** *PROG_NAME* } DESCRIPTION =========== - **bpftool btf { show | list }** [**id** *BTF_ID*] - Show information about loaded BTF objects. If a BTF ID is - specified, show information only about given BTF object, - otherwise list all BTF objects currently loaded on the - system. +bpftool btf { show | list } [id *BTF_ID*] + Show information about loaded BTF objects. If a BTF ID is specified, show + information only about given BTF object, otherwise list all BTF objects + currently loaded on the system. - Since Linux 5.8 bpftool is able to discover information about - processes that hold open file descriptors (FDs) against BTF - objects. On such kernels bpftool will automatically emit this - information as well. + Since Linux 5.8 bpftool is able to discover information about processes + that hold open file descriptors (FDs) against BTF objects. On such kernels + bpftool will automatically emit this information as well. - **bpftool btf dump** *BTF_SRC* - Dump BTF entries from a given *BTF_SRC*. +bpftool btf dump *BTF_SRC* + Dump BTF entries from a given *BTF_SRC*. - When **id** is specified, BTF object with that ID will be - loaded and all its BTF types emitted. + When **id** is specified, BTF object with that ID will be loaded and all + its BTF types emitted. - When **map** is provided, it's expected that map has - associated BTF object with BTF types describing key and - value. It's possible to select whether to dump only BTF - type(s) associated with key (**key**), value (**value**), - both key and value (**kv**), or all BTF types present in - associated BTF object (**all**). If not specified, **kv** - is assumed. + When **map** is provided, it's expected that map has associated BTF object + with BTF types describing key and value. It's possible to select whether to + dump only BTF type(s) associated with key (**key**), value (**value**), + both key and value (**kv**), or all BTF types present in associated BTF + object (**all**). If not specified, **kv** is assumed. - When **prog** is provided, it's expected that program has - associated BTF object with BTF types. + When **prog** is provided, it's expected that program has associated BTF + object with BTF types. - When specifying *FILE*, an ELF file is expected, containing - .BTF section with well-defined BTF binary format data, - typically produced by clang or pahole. + When specifying *FILE*, an ELF file is expected, containing .BTF section + with well-defined BTF binary format data, typically produced by clang or + pahole. - **format** option can be used to override default (raw) - output format. Raw (**raw**) or C-syntax (**c**) output - formats are supported. + **format** option can be used to override default (raw) output format. Raw + (**raw**) or C-syntax (**c**) output formats are supported. - **bpftool btf help** - Print short help message. +bpftool btf help + Print short help message. OPTIONS ======= - .. include:: common_options.rst - - -B, --base-btf *FILE* - Pass a base BTF object. Base BTF objects are typically used - with BTF objects for kernel modules. To avoid duplicating - all kernel symbols required by modules, BTF objects for - modules are "split", they are built incrementally on top of - the kernel (vmlinux) BTF object. So the base BTF reference - should usually point to the kernel BTF. - - When the main BTF object to process (for example, the - module BTF to dump) is passed as a *FILE*, bpftool attempts - to autodetect the path for the base object, and passing - this option is optional. When the main BTF object is passed - through other handles, this option becomes necessary. +.. include:: common_options.rst + +-B, --base-btf *FILE* + Pass a base BTF object. Base BTF objects are typically used with BTF + objects for kernel modules. To avoid duplicating all kernel symbols + required by modules, BTF objects for modules are "split", they are + built incrementally on top of the kernel (vmlinux) BTF object. So the + base BTF reference should usually point to the kernel BTF. + + When the main BTF object to process (for example, the module BTF to + dump) is passed as a *FILE*, bpftool attempts to autodetect the path + for the base object, and passing this option is optional. When the main + BTF object is passed through other handles, this option becomes + necessary. EXAMPLES ======== diff --git a/tools/bpf/bpftool/Documentation/bpftool-cgroup.rst b/tools/bpf/bpftool/Documentation/bpftool-cgroup.rst index 2ce900f66d..e8185596a7 100644 --- a/tools/bpf/bpftool/Documentation/bpftool-cgroup.rst +++ b/tools/bpf/bpftool/Documentation/bpftool-cgroup.rst @@ -14,134 +14,125 @@ tool for inspection and simple manipulation of eBPF progs SYNOPSIS ======== - **bpftool** [*OPTIONS*] **cgroup** *COMMAND* +**bpftool** [*OPTIONS*] **cgroup** *COMMAND* - *OPTIONS* := { |COMMON_OPTIONS| | { **-f** | **--bpffs** } } +*OPTIONS* := { |COMMON_OPTIONS| | { **-f** | **--bpffs** } } - *COMMANDS* := - { **show** | **list** | **tree** | **attach** | **detach** | **help** } +*COMMANDS* := +{ **show** | **list** | **tree** | **attach** | **detach** | **help** } CGROUP COMMANDS =============== -| **bpftool** **cgroup** { **show** | **list** } *CGROUP* [**effective**] -| **bpftool** **cgroup tree** [*CGROUP_ROOT*] [**effective**] -| **bpftool** **cgroup attach** *CGROUP* *ATTACH_TYPE* *PROG* [*ATTACH_FLAGS*] -| **bpftool** **cgroup detach** *CGROUP* *ATTACH_TYPE* *PROG* -| **bpftool** **cgroup help** +| **bpftool** **cgroup** { **show** | **list** } *CGROUP* [**effective**] +| **bpftool** **cgroup tree** [*CGROUP_ROOT*] [**effective**] +| **bpftool** **cgroup attach** *CGROUP* *ATTACH_TYPE* *PROG* [*ATTACH_FLAGS*] +| **bpftool** **cgroup detach** *CGROUP* *ATTACH_TYPE* *PROG* +| **bpftool** **cgroup help** | -| *PROG* := { **id** *PROG_ID* | **pinned** *FILE* | **tag** *PROG_TAG* } -| *ATTACH_TYPE* := { **cgroup_inet_ingress** | **cgroup_inet_egress** | -| **cgroup_inet_sock_create** | **cgroup_sock_ops** | -| **cgroup_device** | **cgroup_inet4_bind** | **cgroup_inet6_bind** | -| **cgroup_inet4_post_bind** | **cgroup_inet6_post_bind** | -| **cgroup_inet4_connect** | **cgroup_inet6_connect** | -| **cgroup_unix_connect** | **cgroup_inet4_getpeername** | -| **cgroup_inet6_getpeername** | **cgroup_unix_getpeername** | -| **cgroup_inet4_getsockname** | **cgroup_inet6_getsockname** | -| **cgroup_unix_getsockname** | **cgroup_udp4_sendmsg** | -| **cgroup_udp6_sendmsg** | **cgroup_unix_sendmsg** | -| **cgroup_udp4_recvmsg** | **cgroup_udp6_recvmsg** | -| **cgroup_unix_recvmsg** | **cgroup_sysctl** | -| **cgroup_getsockopt** | **cgroup_setsockopt** | -| **cgroup_inet_sock_release** } -| *ATTACH_FLAGS* := { **multi** | **override** } +| *PROG* := { **id** *PROG_ID* | **pinned** *FILE* | **tag** *PROG_TAG* | **name** *PROG_NAME* } +| *ATTACH_TYPE* := { **cgroup_inet_ingress** | **cgroup_inet_egress** | +| **cgroup_inet_sock_create** | **cgroup_sock_ops** | +| **cgroup_device** | **cgroup_inet4_bind** | **cgroup_inet6_bind** | +| **cgroup_inet4_post_bind** | **cgroup_inet6_post_bind** | +| **cgroup_inet4_connect** | **cgroup_inet6_connect** | +| **cgroup_unix_connect** | **cgroup_inet4_getpeername** | +| **cgroup_inet6_getpeername** | **cgroup_unix_getpeername** | +| **cgroup_inet4_getsockname** | **cgroup_inet6_getsockname** | +| **cgroup_unix_getsockname** | **cgroup_udp4_sendmsg** | +| **cgroup_udp6_sendmsg** | **cgroup_unix_sendmsg** | +| **cgroup_udp4_recvmsg** | **cgroup_udp6_recvmsg** | +| **cgroup_unix_recvmsg** | **cgroup_sysctl** | +| **cgroup_getsockopt** | **cgroup_setsockopt** | +| **cgroup_inet_sock_release** } +| *ATTACH_FLAGS* := { **multi** | **override** } DESCRIPTION =========== - **bpftool cgroup { show | list }** *CGROUP* [**effective**] - List all programs attached to the cgroup *CGROUP*. - - Output will start with program ID followed by attach type, - attach flags and program name. - - If **effective** is specified retrieve effective programs that - will execute for events within a cgroup. This includes - inherited along with attached ones. - - **bpftool cgroup tree** [*CGROUP_ROOT*] [**effective**] - Iterate over all cgroups in *CGROUP_ROOT* and list all - attached programs. If *CGROUP_ROOT* is not specified, - bpftool uses cgroup v2 mountpoint. - - The output is similar to the output of cgroup show/list - commands: it starts with absolute cgroup path, followed by - program ID, attach type, attach flags and program name. - - If **effective** is specified retrieve effective programs that - will execute for events within a cgroup. This includes - inherited along with attached ones. - - **bpftool cgroup attach** *CGROUP* *ATTACH_TYPE* *PROG* [*ATTACH_FLAGS*] - Attach program *PROG* to the cgroup *CGROUP* with attach type - *ATTACH_TYPE* and optional *ATTACH_FLAGS*. - - *ATTACH_FLAGS* can be one of: **override** if a sub-cgroup installs - some bpf program, the program in this cgroup yields to sub-cgroup - program; **multi** if a sub-cgroup installs some bpf program, - that cgroup program gets run in addition to the program in this - cgroup. - - Only one program is allowed to be attached to a cgroup with - no attach flags or the **override** flag. Attaching another - program will release old program and attach the new one. - - Multiple programs are allowed to be attached to a cgroup with - **multi**. They are executed in FIFO order (those that were - attached first, run first). - - Non-default *ATTACH_FLAGS* are supported by kernel version 4.14 - and later. - - *ATTACH_TYPE* can be on of: - **ingress** ingress path of the inet socket (since 4.10); - **egress** egress path of the inet socket (since 4.10); - **sock_create** opening of an inet socket (since 4.10); - **sock_ops** various socket operations (since 4.12); - **device** device access (since 4.15); - **bind4** call to bind(2) for an inet4 socket (since 4.17); - **bind6** call to bind(2) for an inet6 socket (since 4.17); - **post_bind4** return from bind(2) for an inet4 socket (since 4.17); - **post_bind6** return from bind(2) for an inet6 socket (since 4.17); - **connect4** call to connect(2) for an inet4 socket (since 4.17); - **connect6** call to connect(2) for an inet6 socket (since 4.17); - **connect_unix** call to connect(2) for a unix socket (since 6.7); - **sendmsg4** call to sendto(2), sendmsg(2), sendmmsg(2) for an - unconnected udp4 socket (since 4.18); - **sendmsg6** call to sendto(2), sendmsg(2), sendmmsg(2) for an - unconnected udp6 socket (since 4.18); - **sendmsg_unix** call to sendto(2), sendmsg(2), sendmmsg(2) for - an unconnected unix socket (since 6.7); - **recvmsg4** call to recvfrom(2), recvmsg(2), recvmmsg(2) for - an unconnected udp4 socket (since 5.2); - **recvmsg6** call to recvfrom(2), recvmsg(2), recvmmsg(2) for - an unconnected udp6 socket (since 5.2); - **recvmsg_unix** call to recvfrom(2), recvmsg(2), recvmmsg(2) for - an unconnected unix socket (since 6.7); - **sysctl** sysctl access (since 5.2); - **getsockopt** call to getsockopt (since 5.3); - **setsockopt** call to setsockopt (since 5.3); - **getpeername4** call to getpeername(2) for an inet4 socket (since 5.8); - **getpeername6** call to getpeername(2) for an inet6 socket (since 5.8); - **getpeername_unix** call to getpeername(2) for a unix socket (since 6.7); - **getsockname4** call to getsockname(2) for an inet4 socket (since 5.8); - **getsockname6** call to getsockname(2) for an inet6 socket (since 5.8). - **getsockname_unix** call to getsockname(2) for a unix socket (since 6.7); - **sock_release** closing an userspace inet socket (since 5.9). - - **bpftool cgroup detach** *CGROUP* *ATTACH_TYPE* *PROG* - Detach *PROG* from the cgroup *CGROUP* and attach type - *ATTACH_TYPE*. - - **bpftool prog help** - Print short help message. +bpftool cgroup { show | list } *CGROUP* [effective] + List all programs attached to the cgroup *CGROUP*. + + Output will start with program ID followed by attach type, attach flags and + program name. + + If **effective** is specified retrieve effective programs that will execute + for events within a cgroup. This includes inherited along with attached + ones. + +bpftool cgroup tree [*CGROUP_ROOT*] [effective] + Iterate over all cgroups in *CGROUP_ROOT* and list all attached programs. + If *CGROUP_ROOT* is not specified, bpftool uses cgroup v2 mountpoint. + + The output is similar to the output of cgroup show/list commands: it starts + with absolute cgroup path, followed by program ID, attach type, attach + flags and program name. + + If **effective** is specified retrieve effective programs that will execute + for events within a cgroup. This includes inherited along with attached + ones. + +bpftool cgroup attach *CGROUP* *ATTACH_TYPE* *PROG* [*ATTACH_FLAGS*] + Attach program *PROG* to the cgroup *CGROUP* with attach type *ATTACH_TYPE* + and optional *ATTACH_FLAGS*. + + *ATTACH_FLAGS* can be one of: **override** if a sub-cgroup installs some + bpf program, the program in this cgroup yields to sub-cgroup program; + **multi** if a sub-cgroup installs some bpf program, that cgroup program + gets run in addition to the program in this cgroup. + + Only one program is allowed to be attached to a cgroup with no attach flags + or the **override** flag. Attaching another program will release old + program and attach the new one. + + Multiple programs are allowed to be attached to a cgroup with **multi**. + They are executed in FIFO order (those that were attached first, run + first). + + Non-default *ATTACH_FLAGS* are supported by kernel version 4.14 and later. + + *ATTACH_TYPE* can be one of: + + - **ingress** ingress path of the inet socket (since 4.10) + - **egress** egress path of the inet socket (since 4.10) + - **sock_create** opening of an inet socket (since 4.10) + - **sock_ops** various socket operations (since 4.12) + - **device** device access (since 4.15) + - **bind4** call to bind(2) for an inet4 socket (since 4.17) + - **bind6** call to bind(2) for an inet6 socket (since 4.17) + - **post_bind4** return from bind(2) for an inet4 socket (since 4.17) + - **post_bind6** return from bind(2) for an inet6 socket (since 4.17) + - **connect4** call to connect(2) for an inet4 socket (since 4.17) + - **connect6** call to connect(2) for an inet6 socket (since 4.17) + - **connect_unix** call to connect(2) for a unix socket (since 6.7) + - **sendmsg4** call to sendto(2), sendmsg(2), sendmmsg(2) for an unconnected udp4 socket (since 4.18) + - **sendmsg6** call to sendto(2), sendmsg(2), sendmmsg(2) for an unconnected udp6 socket (since 4.18) + - **sendmsg_unix** call to sendto(2), sendmsg(2), sendmmsg(2) for an unconnected unix socket (since 6.7) + - **recvmsg4** call to recvfrom(2), recvmsg(2), recvmmsg(2) for an unconnected udp4 socket (since 5.2) + - **recvmsg6** call to recvfrom(2), recvmsg(2), recvmmsg(2) for an unconnected udp6 socket (since 5.2) + - **recvmsg_unix** call to recvfrom(2), recvmsg(2), recvmmsg(2) for an unconnected unix socket (since 6.7) + - **sysctl** sysctl access (since 5.2) + - **getsockopt** call to getsockopt (since 5.3) + - **setsockopt** call to setsockopt (since 5.3) + - **getpeername4** call to getpeername(2) for an inet4 socket (since 5.8) + - **getpeername6** call to getpeername(2) for an inet6 socket (since 5.8) + - **getpeername_unix** call to getpeername(2) for a unix socket (since 6.7) + - **getsockname4** call to getsockname(2) for an inet4 socket (since 5.8) + - **getsockname6** call to getsockname(2) for an inet6 socket (since 5.8) + - **getsockname_unix** call to getsockname(2) for a unix socket (since 6.7) + - **sock_release** closing a userspace inet socket (since 5.9) + +bpftool cgroup detach *CGROUP* *ATTACH_TYPE* *PROG* + Detach *PROG* from the cgroup *CGROUP* and attach type *ATTACH_TYPE*. + +bpftool prog help + Print short help message. OPTIONS ======= - .. include:: common_options.rst +.. include:: common_options.rst - -f, --bpffs - Show file names of pinned programs. +-f, --bpffs + Show file names of pinned programs. EXAMPLES ======== diff --git a/tools/bpf/bpftool/Documentation/bpftool-feature.rst b/tools/bpf/bpftool/Documentation/bpftool-feature.rst index e44039f89b..c7f837898b 100644 --- a/tools/bpf/bpftool/Documentation/bpftool-feature.rst +++ b/tools/bpf/bpftool/Documentation/bpftool-feature.rst @@ -14,77 +14,70 @@ tool for inspection of eBPF-related parameters for Linux kernel or net device SYNOPSIS ======== - **bpftool** [*OPTIONS*] **feature** *COMMAND* +**bpftool** [*OPTIONS*] **feature** *COMMAND* - *OPTIONS* := { |COMMON_OPTIONS| } +*OPTIONS* := { |COMMON_OPTIONS| } - *COMMANDS* := { **probe** | **help** } +*COMMANDS* := { **probe** | **help** } FEATURE COMMANDS ================ -| **bpftool** **feature probe** [*COMPONENT*] [**full**] [**unprivileged**] [**macros** [**prefix** *PREFIX*]] -| **bpftool** **feature list_builtins** *GROUP* -| **bpftool** **feature help** +| **bpftool** **feature probe** [*COMPONENT*] [**full**] [**unprivileged**] [**macros** [**prefix** *PREFIX*]] +| **bpftool** **feature list_builtins** *GROUP* +| **bpftool** **feature help** | -| *COMPONENT* := { **kernel** | **dev** *NAME* } -| *GROUP* := { **prog_types** | **map_types** | **attach_types** | **link_types** | **helpers** } +| *COMPONENT* := { **kernel** | **dev** *NAME* } +| *GROUP* := { **prog_types** | **map_types** | **attach_types** | **link_types** | **helpers** } DESCRIPTION =========== - **bpftool feature probe** [**kernel**] [**full**] [**macros** [**prefix** *PREFIX*]] - Probe the running kernel and dump a number of eBPF-related - parameters, such as availability of the **bpf**\ () system call, - JIT status, eBPF program types availability, eBPF helper - functions availability, and more. - - By default, bpftool **does not run probes** for - **bpf_probe_write_user**\ () and **bpf_trace_printk**\() - helpers which print warnings to kernel logs. To enable them - and run all probes, the **full** keyword should be used. - - If the **macros** keyword (but not the **-j** option) is - passed, a subset of the output is dumped as a list of - **#define** macros that are ready to be included in a C - header file, for example. If, additionally, **prefix** is - used to define a *PREFIX*, the provided string will be used - as a prefix to the names of the macros: this can be used to - avoid conflicts on macro names when including the output of - this command as a header file. - - Keyword **kernel** can be omitted. If no probe target is - specified, probing the kernel is the default behaviour. - - When the **unprivileged** keyword is used, bpftool will dump - only the features available to a user who does not have the - **CAP_SYS_ADMIN** capability set. The features available in - that case usually represent a small subset of the parameters - supported by the system. Unprivileged users MUST use the - **unprivileged** keyword: This is to avoid misdetection if - bpftool is inadvertently run as non-root, for example. This - keyword is unavailable if bpftool was compiled without - libcap. - - **bpftool feature probe dev** *NAME* [**full**] [**macros** [**prefix** *PREFIX*]] - Probe network device for supported eBPF features and dump - results to the console. - - The keywords **full**, **macros** and **prefix** have the - same role as when probing the kernel. - - **bpftool feature list_builtins** *GROUP* - List items known to bpftool. These can be BPF program types - (**prog_types**), BPF map types (**map_types**), attach types - (**attach_types**), link types (**link_types**), or BPF helper - functions (**helpers**). The command does not probe the system, but - simply lists the elements that bpftool knows from compilation time, - as provided from libbpf (for all object types) or from the BPF UAPI - header (list of helpers). This can be used in scripts to iterate over - BPF types or helpers. - - **bpftool feature help** - Print short help message. +bpftool feature probe [kernel] [full] [macros [prefix *PREFIX*]] + Probe the running kernel and dump a number of eBPF-related parameters, such + as availability of the **bpf**\ () system call, JIT status, eBPF program + types availability, eBPF helper functions availability, and more. + + By default, bpftool **does not run probes** for **bpf_probe_write_user**\ + () and **bpf_trace_printk**\() helpers which print warnings to kernel logs. + To enable them and run all probes, the **full** keyword should be used. + + If the **macros** keyword (but not the **-j** option) is passed, a subset + of the output is dumped as a list of **#define** macros that are ready to + be included in a C header file, for example. If, additionally, **prefix** + is used to define a *PREFIX*, the provided string will be used as a prefix + to the names of the macros: this can be used to avoid conflicts on macro + names when including the output of this command as a header file. + + Keyword **kernel** can be omitted. If no probe target is specified, probing + the kernel is the default behaviour. + + When the **unprivileged** keyword is used, bpftool will dump only the + features available to a user who does not have the **CAP_SYS_ADMIN** + capability set. The features available in that case usually represent a + small subset of the parameters supported by the system. Unprivileged users + MUST use the **unprivileged** keyword: This is to avoid misdetection if + bpftool is inadvertently run as non-root, for example. This keyword is + unavailable if bpftool was compiled without libcap. + +bpftool feature probe dev *NAME* [full] [macros [prefix *PREFIX*]] + Probe network device for supported eBPF features and dump results to the + console. + + The keywords **full**, **macros** and **prefix** have the same role as when + probing the kernel. + +bpftool feature list_builtins *GROUP* + List items known to bpftool. These can be BPF program types + (**prog_types**), BPF map types (**map_types**), attach types + (**attach_types**), link types (**link_types**), or BPF helper functions + (**helpers**). The command does not probe the system, but simply lists the + elements that bpftool knows from compilation time, as provided from libbpf + (for all object types) or from the BPF UAPI header (list of helpers). This + can be used in scripts to iterate over BPF types or helpers. + +bpftool feature help + Print short help message. OPTIONS ======= - .. include:: common_options.rst +.. include:: common_options.rst diff --git a/tools/bpf/bpftool/Documentation/bpftool-gen.rst b/tools/bpf/bpftool/Documentation/bpftool-gen.rst index 5e60825818..c768e6d4ae 100644 --- a/tools/bpf/bpftool/Documentation/bpftool-gen.rst +++ b/tools/bpf/bpftool/Documentation/bpftool-gen.rst @@ -14,199 +14,177 @@ tool for BPF code-generation SYNOPSIS ======== - **bpftool** [*OPTIONS*] **gen** *COMMAND* +**bpftool** [*OPTIONS*] **gen** *COMMAND* - *OPTIONS* := { |COMMON_OPTIONS| | { **-L** | **--use-loader** } } +*OPTIONS* := { |COMMON_OPTIONS| | { **-L** | **--use-loader** } } - *COMMAND* := { **object** | **skeleton** | **help** } +*COMMAND* := { **object** | **skeleton** | **help** } GEN COMMANDS ============= -| **bpftool** **gen object** *OUTPUT_FILE* *INPUT_FILE* [*INPUT_FILE*...] -| **bpftool** **gen skeleton** *FILE* [**name** *OBJECT_NAME*] -| **bpftool** **gen subskeleton** *FILE* [**name** *OBJECT_NAME*] -| **bpftool** **gen min_core_btf** *INPUT* *OUTPUT* *OBJECT* [*OBJECT*...] -| **bpftool** **gen help** +| **bpftool** **gen object** *OUTPUT_FILE* *INPUT_FILE* [*INPUT_FILE*...] +| **bpftool** **gen skeleton** *FILE* [**name** *OBJECT_NAME*] +| **bpftool** **gen subskeleton** *FILE* [**name** *OBJECT_NAME*] +| **bpftool** **gen min_core_btf** *INPUT* *OUTPUT* *OBJECT* [*OBJECT*...] +| **bpftool** **gen help** DESCRIPTION =========== - **bpftool gen object** *OUTPUT_FILE* *INPUT_FILE* [*INPUT_FILE*...] - Statically link (combine) together one or more *INPUT_FILE*'s - into a single resulting *OUTPUT_FILE*. All the files involved - are BPF ELF object files. - - The rules of BPF static linking are mostly the same as for - user-space object files, but in addition to combining data - and instruction sections, .BTF and .BTF.ext (if present in - any of the input files) data are combined together. .BTF - data is deduplicated, so all the common types across - *INPUT_FILE*'s will only be represented once in the resulting - BTF information. - - BPF static linking allows to partition BPF source code into - individually compiled files that are then linked into - a single resulting BPF object file, which can be used to - generated BPF skeleton (with **gen skeleton** command) or - passed directly into **libbpf** (using **bpf_object__open()** - family of APIs). - - **bpftool gen skeleton** *FILE* - Generate BPF skeleton C header file for a given *FILE*. - - BPF skeleton is an alternative interface to existing libbpf - APIs for working with BPF objects. Skeleton code is intended - to significantly shorten and simplify code to load and work - with BPF programs from userspace side. Generated code is - tailored to specific input BPF object *FILE*, reflecting its - structure by listing out available maps, program, variables, - etc. Skeleton eliminates the need to lookup mentioned - components by name. Instead, if skeleton instantiation - succeeds, they are populated in skeleton structure as valid - libbpf types (e.g., **struct bpf_map** pointer) and can be - passed to existing generic libbpf APIs. - - In addition to simple and reliable access to maps and - programs, skeleton provides a storage for BPF links (**struct - bpf_link**) for each BPF program within BPF object. When - requested, supported BPF programs will be automatically - attached and resulting BPF links stored for further use by - user in pre-allocated fields in skeleton struct. For BPF - programs that can't be automatically attached by libbpf, - user can attach them manually, but store resulting BPF link - in per-program link field. All such set up links will be - automatically destroyed on BPF skeleton destruction. This - eliminates the need for users to manage links manually and - rely on libbpf support to detach programs and free up - resources. - - Another facility provided by BPF skeleton is an interface to - global variables of all supported kinds: mutable, read-only, - as well as extern ones. This interface allows to pre-setup - initial values of variables before BPF object is loaded and - verified by kernel. For non-read-only variables, the same - interface can be used to fetch values of global variables on - userspace side, even if they are modified by BPF code. - - During skeleton generation, contents of source BPF object - *FILE* is embedded within generated code and is thus not - necessary to keep around. This ensures skeleton and BPF - object file are matching 1-to-1 and always stay in sync. - Generated code is dual-licensed under LGPL-2.1 and - BSD-2-Clause licenses. - - It is a design goal and guarantee that skeleton interfaces - are interoperable with generic libbpf APIs. User should - always be able to use skeleton API to create and load BPF - object, and later use libbpf APIs to keep working with - specific maps, programs, etc. - - As part of skeleton, few custom functions are generated. - Each of them is prefixed with object name. Object name can - either be derived from object file name, i.e., if BPF object - file name is **example.o**, BPF object name will be - **example**. Object name can be also specified explicitly - through **name** *OBJECT_NAME* parameter. The following - custom functions are provided (assuming **example** as - the object name): - - - **example__open** and **example__open_opts**. - These functions are used to instantiate skeleton. It - corresponds to libbpf's **bpf_object__open**\ () API. - **_opts** variants accepts extra **bpf_object_open_opts** - options. - - - **example__load**. - This function creates maps, loads and verifies BPF - programs, initializes global data maps. It corresponds to - libppf's **bpf_object__load**\ () API. - - - **example__open_and_load** combines **example__open** and - **example__load** invocations in one commonly used - operation. - - - **example__attach** and **example__detach** - This pair of functions allow to attach and detach, - correspondingly, already loaded BPF object. Only BPF - programs of types supported by libbpf for auto-attachment - will be auto-attached and their corresponding BPF links - instantiated. For other BPF programs, user can manually - create a BPF link and assign it to corresponding fields in - skeleton struct. **example__detach** will detach both - links created automatically, as well as those populated by - user manually. - - - **example__destroy** - Detach and unload BPF programs, free up all the resources - used by skeleton and BPF object. - - If BPF object has global variables, corresponding structs - with memory layout corresponding to global data data section - layout will be created. Currently supported ones are: *.data*, - *.bss*, *.rodata*, and *.kconfig* structs/data sections. - These data sections/structs can be used to set up initial - values of variables, if set before **example__load**. - Afterwards, if target kernel supports memory-mapped BPF - arrays, same structs can be used to fetch and update - (non-read-only) data from userspace, with same simplicity - as for BPF side. - - **bpftool gen subskeleton** *FILE* - Generate BPF subskeleton C header file for a given *FILE*. - - Subskeletons are similar to skeletons, except they do not own - the corresponding maps, programs, or global variables. They - require that the object file used to generate them is already - loaded into a *bpf_object* by some other means. - - This functionality is useful when a library is included into a - larger BPF program. A subskeleton for the library would have - access to all objects and globals defined in it, without - having to know about the larger program. - - Consequently, there are only two functions defined - for subskeletons: - - - **example__open(bpf_object\*)** - Instantiates a subskeleton from an already opened (but not - necessarily loaded) **bpf_object**. - - - **example__destroy()** - Frees the storage for the subskeleton but *does not* unload - any BPF programs or maps. - - **bpftool** **gen min_core_btf** *INPUT* *OUTPUT* *OBJECT* [*OBJECT*...] - Generate a minimum BTF file as *OUTPUT*, derived from a given - *INPUT* BTF file, containing all needed BTF types so one, or - more, given eBPF objects CO-RE relocations may be satisfied. - - When kernels aren't compiled with CONFIG_DEBUG_INFO_BTF, - libbpf, when loading an eBPF object, has to rely on external - BTF files to be able to calculate CO-RE relocations. - - Usually, an external BTF file is built from existing kernel - DWARF data using pahole. It contains all the types used by - its respective kernel image and, because of that, is big. - - The min_core_btf feature builds smaller BTF files, customized - to one or multiple eBPF objects, so they can be distributed - together with an eBPF CO-RE based application, turning the - application portable to different kernel versions. - - Check examples bellow for more information how to use it. - - **bpftool gen help** - Print short help message. +bpftool gen object *OUTPUT_FILE* *INPUT_FILE* [*INPUT_FILE*...] + Statically link (combine) together one or more *INPUT_FILE*'s into a single + resulting *OUTPUT_FILE*. All the files involved are BPF ELF object files. + + The rules of BPF static linking are mostly the same as for user-space + object files, but in addition to combining data and instruction sections, + .BTF and .BTF.ext (if present in any of the input files) data are combined + together. .BTF data is deduplicated, so all the common types across + *INPUT_FILE*'s will only be represented once in the resulting BTF + information. + + BPF static linking allows to partition BPF source code into individually + compiled files that are then linked into a single resulting BPF object + file, which can be used to generated BPF skeleton (with **gen skeleton** + command) or passed directly into **libbpf** (using **bpf_object__open()** + family of APIs). + +bpftool gen skeleton *FILE* + Generate BPF skeleton C header file for a given *FILE*. + + BPF skeleton is an alternative interface to existing libbpf APIs for + working with BPF objects. Skeleton code is intended to significantly + shorten and simplify code to load and work with BPF programs from userspace + side. Generated code is tailored to specific input BPF object *FILE*, + reflecting its structure by listing out available maps, program, variables, + etc. Skeleton eliminates the need to lookup mentioned components by name. + Instead, if skeleton instantiation succeeds, they are populated in skeleton + structure as valid libbpf types (e.g., **struct bpf_map** pointer) and can + be passed to existing generic libbpf APIs. + + In addition to simple and reliable access to maps and programs, skeleton + provides a storage for BPF links (**struct bpf_link**) for each BPF program + within BPF object. When requested, supported BPF programs will be + automatically attached and resulting BPF links stored for further use by + user in pre-allocated fields in skeleton struct. For BPF programs that + can't be automatically attached by libbpf, user can attach them manually, + but store resulting BPF link in per-program link field. All such set up + links will be automatically destroyed on BPF skeleton destruction. This + eliminates the need for users to manage links manually and rely on libbpf + support to detach programs and free up resources. + + Another facility provided by BPF skeleton is an interface to global + variables of all supported kinds: mutable, read-only, as well as extern + ones. This interface allows to pre-setup initial values of variables before + BPF object is loaded and verified by kernel. For non-read-only variables, + the same interface can be used to fetch values of global variables on + userspace side, even if they are modified by BPF code. + + During skeleton generation, contents of source BPF object *FILE* is + embedded within generated code and is thus not necessary to keep around. + This ensures skeleton and BPF object file are matching 1-to-1 and always + stay in sync. Generated code is dual-licensed under LGPL-2.1 and + BSD-2-Clause licenses. + + It is a design goal and guarantee that skeleton interfaces are + interoperable with generic libbpf APIs. User should always be able to use + skeleton API to create and load BPF object, and later use libbpf APIs to + keep working with specific maps, programs, etc. + + As part of skeleton, few custom functions are generated. Each of them is + prefixed with object name. Object name can either be derived from object + file name, i.e., if BPF object file name is **example.o**, BPF object name + will be **example**. Object name can be also specified explicitly through + **name** *OBJECT_NAME* parameter. The following custom functions are + provided (assuming **example** as the object name): + + - **example__open** and **example__open_opts**. + These functions are used to instantiate skeleton. It corresponds to + libbpf's **bpf_object__open**\ () API. **_opts** variants accepts extra + **bpf_object_open_opts** options. + + - **example__load**. + This function creates maps, loads and verifies BPF programs, initializes + global data maps. It corresponds to libppf's **bpf_object__load**\ () + API. + + - **example__open_and_load** combines **example__open** and + **example__load** invocations in one commonly used operation. + + - **example__attach** and **example__detach**. + This pair of functions allow to attach and detach, correspondingly, + already loaded BPF object. Only BPF programs of types supported by libbpf + for auto-attachment will be auto-attached and their corresponding BPF + links instantiated. For other BPF programs, user can manually create a + BPF link and assign it to corresponding fields in skeleton struct. + **example__detach** will detach both links created automatically, as well + as those populated by user manually. + + - **example__destroy**. + Detach and unload BPF programs, free up all the resources used by + skeleton and BPF object. + + If BPF object has global variables, corresponding structs with memory + layout corresponding to global data data section layout will be created. + Currently supported ones are: *.data*, *.bss*, *.rodata*, and *.kconfig* + structs/data sections. These data sections/structs can be used to set up + initial values of variables, if set before **example__load**. Afterwards, + if target kernel supports memory-mapped BPF arrays, same structs can be + used to fetch and update (non-read-only) data from userspace, with same + simplicity as for BPF side. + +bpftool gen subskeleton *FILE* + Generate BPF subskeleton C header file for a given *FILE*. + + Subskeletons are similar to skeletons, except they do not own the + corresponding maps, programs, or global variables. They require that the + object file used to generate them is already loaded into a *bpf_object* by + some other means. + + This functionality is useful when a library is included into a larger BPF + program. A subskeleton for the library would have access to all objects and + globals defined in it, without having to know about the larger program. + + Consequently, there are only two functions defined for subskeletons: + + - **example__open(bpf_object\*)**. + Instantiates a subskeleton from an already opened (but not necessarily + loaded) **bpf_object**. + + - **example__destroy()**. + Frees the storage for the subskeleton but *does not* unload any BPF + programs or maps. + +bpftool gen min_core_btf *INPUT* *OUTPUT* *OBJECT* [*OBJECT*...] + Generate a minimum BTF file as *OUTPUT*, derived from a given *INPUT* BTF + file, containing all needed BTF types so one, or more, given eBPF objects + CO-RE relocations may be satisfied. + + When kernels aren't compiled with CONFIG_DEBUG_INFO_BTF, libbpf, when + loading an eBPF object, has to rely on external BTF files to be able to + calculate CO-RE relocations. + + Usually, an external BTF file is built from existing kernel DWARF data + using pahole. It contains all the types used by its respective kernel image + and, because of that, is big. + + The min_core_btf feature builds smaller BTF files, customized to one or + multiple eBPF objects, so they can be distributed together with an eBPF + CO-RE based application, turning the application portable to different + kernel versions. + + Check examples bellow for more information how to use it. + +bpftool gen help + Print short help message. OPTIONS ======= - .. include:: common_options.rst +.. include:: common_options.rst - -L, --use-loader - For skeletons, generate a "light" skeleton (also known as "loader" - skeleton). A light skeleton contains a loader eBPF program. It does - not use the majority of the libbpf infrastructure, and does not need - libelf. +-L, --use-loader + For skeletons, generate a "light" skeleton (also known as "loader" + skeleton). A light skeleton contains a loader eBPF program. It does not use + the majority of the libbpf infrastructure, and does not need libelf. EXAMPLES ======== diff --git a/tools/bpf/bpftool/Documentation/bpftool-iter.rst b/tools/bpf/bpftool/Documentation/bpftool-iter.rst index 84839d4886..2e5d81c906 100644 --- a/tools/bpf/bpftool/Documentation/bpftool-iter.rst +++ b/tools/bpf/bpftool/Documentation/bpftool-iter.rst @@ -14,50 +14,46 @@ tool to create BPF iterators SYNOPSIS ======== - **bpftool** [*OPTIONS*] **iter** *COMMAND* +**bpftool** [*OPTIONS*] **iter** *COMMAND* - *OPTIONS* := { |COMMON_OPTIONS| } +*OPTIONS* := { |COMMON_OPTIONS| } - *COMMANDS* := { **pin** | **help** } +*COMMANDS* := { **pin** | **help** } ITER COMMANDS -=================== +============= -| **bpftool** **iter pin** *OBJ* *PATH* [**map** *MAP*] -| **bpftool** **iter help** +| **bpftool** **iter pin** *OBJ* *PATH* [**map** *MAP*] +| **bpftool** **iter help** | -| *OBJ* := /a/file/of/bpf_iter_target.o -| *MAP* := { **id** *MAP_ID* | **pinned** *FILE* } +| *OBJ* := /a/file/of/bpf_iter_target.o +| *MAP* := { **id** *MAP_ID* | **pinned** *FILE* } DESCRIPTION =========== - **bpftool iter pin** *OBJ* *PATH* [**map** *MAP*] - A bpf iterator combines a kernel iterating of - particular kernel data (e.g., tasks, bpf_maps, etc.) - and a bpf program called for each kernel data object - (e.g., one task, one bpf_map, etc.). User space can - *read* kernel iterator output through *read()* syscall. - - The *pin* command creates a bpf iterator from *OBJ*, - and pin it to *PATH*. The *PATH* should be located - in *bpffs* mount. It must not contain a dot - character ('.'), which is reserved for future extensions - of *bpffs*. - - Map element bpf iterator requires an additional parameter - *MAP* so bpf program can iterate over map elements for - that map. User can have a bpf program in kernel to run - with each map element, do checking, filtering, aggregation, - etc. without copying data to user space. - - User can then *cat PATH* to see the bpf iterator output. - - **bpftool iter help** - Print short help message. +bpftool iter pin *OBJ* *PATH* [map *MAP*] + A bpf iterator combines a kernel iterating of particular kernel data (e.g., + tasks, bpf_maps, etc.) and a bpf program called for each kernel data object + (e.g., one task, one bpf_map, etc.). User space can *read* kernel iterator + output through *read()* syscall. + + The *pin* command creates a bpf iterator from *OBJ*, and pin it to *PATH*. + The *PATH* should be located in *bpffs* mount. It must not contain a dot + character ('.'), which is reserved for future extensions of *bpffs*. + + Map element bpf iterator requires an additional parameter *MAP* so bpf + program can iterate over map elements for that map. User can have a bpf + program in kernel to run with each map element, do checking, filtering, + aggregation, etc. without copying data to user space. + + User can then *cat PATH* to see the bpf iterator output. + +bpftool iter help + Print short help message. OPTIONS ======= - .. include:: common_options.rst +.. include:: common_options.rst EXAMPLES ======== diff --git a/tools/bpf/bpftool/Documentation/bpftool-link.rst b/tools/bpf/bpftool/Documentation/bpftool-link.rst index 52a4eee4af..6f09d4405e 100644 --- a/tools/bpf/bpftool/Documentation/bpftool-link.rst +++ b/tools/bpf/bpftool/Documentation/bpftool-link.rst @@ -14,67 +14,62 @@ tool for inspection and simple manipulation of eBPF links SYNOPSIS ======== - **bpftool** [*OPTIONS*] **link** *COMMAND* +**bpftool** [*OPTIONS*] **link** *COMMAND* - *OPTIONS* := { |COMMON_OPTIONS| | { **-f** | **--bpffs** } | { **-n** | **--nomount** } } +*OPTIONS* := { |COMMON_OPTIONS| | { **-f** | **--bpffs** } | { **-n** | **--nomount** } } - *COMMANDS* := { **show** | **list** | **pin** | **help** } +*COMMANDS* := { **show** | **list** | **pin** | **help** } LINK COMMANDS ============= -| **bpftool** **link { show | list }** [*LINK*] -| **bpftool** **link pin** *LINK* *FILE* -| **bpftool** **link detach** *LINK* -| **bpftool** **link help** +| **bpftool** **link { show | list }** [*LINK*] +| **bpftool** **link pin** *LINK* *FILE* +| **bpftool** **link detach** *LINK* +| **bpftool** **link help** | -| *LINK* := { **id** *LINK_ID* | **pinned** *FILE* } +| *LINK* := { **id** *LINK_ID* | **pinned** *FILE* } DESCRIPTION =========== - **bpftool link { show | list }** [*LINK*] - Show information about active links. If *LINK* is - specified show information only about given link, - otherwise list all links currently active on the system. +bpftool link { show | list } [*LINK*] + Show information about active links. If *LINK* is specified show + information only about given link, otherwise list all links currently + active on the system. - Output will start with link ID followed by link type and - zero or more named attributes, some of which depend on type - of link. + Output will start with link ID followed by link type and zero or more named + attributes, some of which depend on type of link. - Since Linux 5.8 bpftool is able to discover information about - processes that hold open file descriptors (FDs) against BPF - links. On such kernels bpftool will automatically emit this - information as well. + Since Linux 5.8 bpftool is able to discover information about processes + that hold open file descriptors (FDs) against BPF links. On such kernels + bpftool will automatically emit this information as well. - **bpftool link pin** *LINK* *FILE* - Pin link *LINK* as *FILE*. +bpftool link pin *LINK* *FILE* + Pin link *LINK* as *FILE*. - Note: *FILE* must be located in *bpffs* mount. It must not - contain a dot character ('.'), which is reserved for future - extensions of *bpffs*. + Note: *FILE* must be located in *bpffs* mount. It must not contain a dot + character ('.'), which is reserved for future extensions of *bpffs*. - **bpftool link detach** *LINK* - Force-detach link *LINK*. BPF link and its underlying BPF - program will stay valid, but they will be detached from the - respective BPF hook and BPF link will transition into - a defunct state until last open file descriptor for that - link is closed. +bpftool link detach *LINK* + Force-detach link *LINK*. BPF link and its underlying BPF program will stay + valid, but they will be detached from the respective BPF hook and BPF link + will transition into a defunct state until last open file descriptor for + that link is closed. - **bpftool link help** - Print short help message. +bpftool link help + Print short help message. OPTIONS ======= - .. include:: common_options.rst + .. include:: common_options.rst - -f, --bpffs - When showing BPF links, show file names of pinned - links. + -f, --bpffs + When showing BPF links, show file names of pinned links. - -n, --nomount - Do not automatically attempt to mount any virtual file system - (such as tracefs or BPF virtual file system) when necessary. + -n, --nomount + Do not automatically attempt to mount any virtual file system (such as + tracefs or BPF virtual file system) when necessary. EXAMPLES ======== diff --git a/tools/bpf/bpftool/Documentation/bpftool-map.rst b/tools/bpf/bpftool/Documentation/bpftool-map.rst index 9d6a314dfd..252e4c538e 100644 --- a/tools/bpf/bpftool/Documentation/bpftool-map.rst +++ b/tools/bpf/bpftool/Documentation/bpftool-map.rst @@ -14,166 +14,160 @@ tool for inspection and simple manipulation of eBPF maps SYNOPSIS ======== - **bpftool** [*OPTIONS*] **map** *COMMAND* +**bpftool** [*OPTIONS*] **map** *COMMAND* - *OPTIONS* := { |COMMON_OPTIONS| | { **-f** | **--bpffs** } | { **-n** | **--nomount** } } +*OPTIONS* := { |COMMON_OPTIONS| | { **-f** | **--bpffs** } | { **-n** | **--nomount** } } - *COMMANDS* := - { **show** | **list** | **create** | **dump** | **update** | **lookup** | **getnext** | - **delete** | **pin** | **help** } +*COMMANDS* := +{ **show** | **list** | **create** | **dump** | **update** | **lookup** | **getnext** | +**delete** | **pin** | **help** } MAP COMMANDS ============= -| **bpftool** **map** { **show** | **list** } [*MAP*] -| **bpftool** **map create** *FILE* **type** *TYPE* **key** *KEY_SIZE* **value** *VALUE_SIZE* \ -| **entries** *MAX_ENTRIES* **name** *NAME* [**flags** *FLAGS*] [**inner_map** *MAP*] \ -| [**offload_dev** *NAME*] -| **bpftool** **map dump** *MAP* -| **bpftool** **map update** *MAP* [**key** *DATA*] [**value** *VALUE*] [*UPDATE_FLAGS*] -| **bpftool** **map lookup** *MAP* [**key** *DATA*] -| **bpftool** **map getnext** *MAP* [**key** *DATA*] -| **bpftool** **map delete** *MAP* **key** *DATA* -| **bpftool** **map pin** *MAP* *FILE* -| **bpftool** **map event_pipe** *MAP* [**cpu** *N* **index** *M*] -| **bpftool** **map peek** *MAP* -| **bpftool** **map push** *MAP* **value** *VALUE* -| **bpftool** **map pop** *MAP* -| **bpftool** **map enqueue** *MAP* **value** *VALUE* -| **bpftool** **map dequeue** *MAP* -| **bpftool** **map freeze** *MAP* -| **bpftool** **map help** +| **bpftool** **map** { **show** | **list** } [*MAP*] +| **bpftool** **map create** *FILE* **type** *TYPE* **key** *KEY_SIZE* **value** *VALUE_SIZE* \ +| **entries** *MAX_ENTRIES* **name** *NAME* [**flags** *FLAGS*] [**inner_map** *MAP*] \ +| [**offload_dev** *NAME*] +| **bpftool** **map dump** *MAP* +| **bpftool** **map update** *MAP* [**key** *DATA*] [**value** *VALUE*] [*UPDATE_FLAGS*] +| **bpftool** **map lookup** *MAP* [**key** *DATA*] +| **bpftool** **map getnext** *MAP* [**key** *DATA*] +| **bpftool** **map delete** *MAP* **key** *DATA* +| **bpftool** **map pin** *MAP* *FILE* +| **bpftool** **map event_pipe** *MAP* [**cpu** *N* **index** *M*] +| **bpftool** **map peek** *MAP* +| **bpftool** **map push** *MAP* **value** *VALUE* +| **bpftool** **map pop** *MAP* +| **bpftool** **map enqueue** *MAP* **value** *VALUE* +| **bpftool** **map dequeue** *MAP* +| **bpftool** **map freeze** *MAP* +| **bpftool** **map help** | -| *MAP* := { **id** *MAP_ID* | **pinned** *FILE* | **name** *MAP_NAME* } -| *DATA* := { [**hex**] *BYTES* } -| *PROG* := { **id** *PROG_ID* | **pinned** *FILE* | **tag** *PROG_TAG* | **name** *PROG_NAME* } -| *VALUE* := { *DATA* | *MAP* | *PROG* } -| *UPDATE_FLAGS* := { **any** | **exist** | **noexist** } -| *TYPE* := { **hash** | **array** | **prog_array** | **perf_event_array** | **percpu_hash** -| | **percpu_array** | **stack_trace** | **cgroup_array** | **lru_hash** -| | **lru_percpu_hash** | **lpm_trie** | **array_of_maps** | **hash_of_maps** -| | **devmap** | **devmap_hash** | **sockmap** | **cpumap** | **xskmap** | **sockhash** -| | **cgroup_storage** | **reuseport_sockarray** | **percpu_cgroup_storage** -| | **queue** | **stack** | **sk_storage** | **struct_ops** | **ringbuf** | **inode_storage** -| | **task_storage** | **bloom_filter** | **user_ringbuf** | **cgrp_storage** | **arena** } +| *MAP* := { **id** *MAP_ID* | **pinned** *FILE* | **name** *MAP_NAME* } +| *DATA* := { [**hex**] *BYTES* } +| *PROG* := { **id** *PROG_ID* | **pinned** *FILE* | **tag** *PROG_TAG* | **name** *PROG_NAME* } +| *VALUE* := { *DATA* | *MAP* | *PROG* } +| *UPDATE_FLAGS* := { **any** | **exist** | **noexist** } +| *TYPE* := { **hash** | **array** | **prog_array** | **perf_event_array** | **percpu_hash** +| | **percpu_array** | **stack_trace** | **cgroup_array** | **lru_hash** +| | **lru_percpu_hash** | **lpm_trie** | **array_of_maps** | **hash_of_maps** +| | **devmap** | **devmap_hash** | **sockmap** | **cpumap** | **xskmap** | **sockhash** +| | **cgroup_storage** | **reuseport_sockarray** | **percpu_cgroup_storage** +| | **queue** | **stack** | **sk_storage** | **struct_ops** | **ringbuf** | **inode_storage** +| | **task_storage** | **bloom_filter** | **user_ringbuf** | **cgrp_storage** | **arena** } DESCRIPTION =========== - **bpftool map { show | list }** [*MAP*] - Show information about loaded maps. If *MAP* is specified - show information only about given maps, otherwise list all - maps currently loaded on the system. In case of **name**, - *MAP* may match several maps which will all be shown. +bpftool map { show | list } [*MAP*] + Show information about loaded maps. If *MAP* is specified show information + only about given maps, otherwise list all maps currently loaded on the + system. In case of **name**, *MAP* may match several maps which will all + be shown. - Output will start with map ID followed by map type and - zero or more named attributes (depending on kernel version). + Output will start with map ID followed by map type and zero or more named + attributes (depending on kernel version). - Since Linux 5.8 bpftool is able to discover information about - processes that hold open file descriptors (FDs) against BPF - maps. On such kernels bpftool will automatically emit this - information as well. + Since Linux 5.8 bpftool is able to discover information about processes + that hold open file descriptors (FDs) against BPF maps. On such kernels + bpftool will automatically emit this information as well. - **bpftool map create** *FILE* **type** *TYPE* **key** *KEY_SIZE* **value** *VALUE_SIZE* **entries** *MAX_ENTRIES* **name** *NAME* [**flags** *FLAGS*] [**inner_map** *MAP*] [**offload_dev** *NAME*] - Create a new map with given parameters and pin it to *bpffs* - as *FILE*. +bpftool map create *FILE* type *TYPE* key *KEY_SIZE* value *VALUE_SIZE* entries *MAX_ENTRIES* name *NAME* [flags *FLAGS*] [inner_map *MAP*] [offload_dev *NAME*] + Create a new map with given parameters and pin it to *bpffs* as *FILE*. - *FLAGS* should be an integer which is the combination of - desired flags, e.g. 1024 for **BPF_F_MMAPABLE** (see bpf.h - UAPI header for existing flags). + *FLAGS* should be an integer which is the combination of desired flags, + e.g. 1024 for **BPF_F_MMAPABLE** (see bpf.h UAPI header for existing + flags). - To create maps of type array-of-maps or hash-of-maps, the - **inner_map** keyword must be used to pass an inner map. The - kernel needs it to collect metadata related to the inner maps - that the new map will work with. + To create maps of type array-of-maps or hash-of-maps, the **inner_map** + keyword must be used to pass an inner map. The kernel needs it to collect + metadata related to the inner maps that the new map will work with. - Keyword **offload_dev** expects a network interface name, - and is used to request hardware offload for the map. + Keyword **offload_dev** expects a network interface name, and is used to + request hardware offload for the map. - **bpftool map dump** *MAP* - Dump all entries in a given *MAP*. In case of **name**, - *MAP* may match several maps which will all be dumped. +bpftool map dump *MAP* + Dump all entries in a given *MAP*. In case of **name**, *MAP* may match + several maps which will all be dumped. - **bpftool map update** *MAP* [**key** *DATA*] [**value** *VALUE*] [*UPDATE_FLAGS*] - Update map entry for a given *KEY*. +bpftool map update *MAP* [key *DATA*] [value *VALUE*] [*UPDATE_FLAGS*] + Update map entry for a given *KEY*. - *UPDATE_FLAGS* can be one of: **any** update existing entry - or add if doesn't exit; **exist** update only if entry already - exists; **noexist** update only if entry doesn't exist. + *UPDATE_FLAGS* can be one of: **any** update existing entry or add if + doesn't exit; **exist** update only if entry already exists; **noexist** + update only if entry doesn't exist. - If the **hex** keyword is provided in front of the bytes - sequence, the bytes are parsed as hexadecimal values, even if - no "0x" prefix is added. If the keyword is not provided, then - the bytes are parsed as decimal values, unless a "0x" prefix - (for hexadecimal) or a "0" prefix (for octal) is provided. + If the **hex** keyword is provided in front of the bytes sequence, the + bytes are parsed as hexadecimal values, even if no "0x" prefix is added. If + the keyword is not provided, then the bytes are parsed as decimal values, + unless a "0x" prefix (for hexadecimal) or a "0" prefix (for octal) is + provided. - **bpftool map lookup** *MAP* [**key** *DATA*] - Lookup **key** in the map. +bpftool map lookup *MAP* [key *DATA*] + Lookup **key** in the map. - **bpftool map getnext** *MAP* [**key** *DATA*] - Get next key. If *key* is not specified, get first key. +bpftool map getnext *MAP* [key *DATA*] + Get next key. If *key* is not specified, get first key. - **bpftool map delete** *MAP* **key** *DATA* - Remove entry from the map. +bpftool map delete *MAP* key *DATA* + Remove entry from the map. - **bpftool map pin** *MAP* *FILE* - Pin map *MAP* as *FILE*. +bpftool map pin *MAP* *FILE* + Pin map *MAP* as *FILE*. - Note: *FILE* must be located in *bpffs* mount. It must not - contain a dot character ('.'), which is reserved for future - extensions of *bpffs*. + Note: *FILE* must be located in *bpffs* mount. It must not contain a dot + character ('.'), which is reserved for future extensions of *bpffs*. - **bpftool** **map event_pipe** *MAP* [**cpu** *N* **index** *M*] - Read events from a **BPF_MAP_TYPE_PERF_EVENT_ARRAY** map. +bpftool map event_pipe *MAP* [cpu *N* index *M*] + Read events from a **BPF_MAP_TYPE_PERF_EVENT_ARRAY** map. - Install perf rings into a perf event array map and dump - output of any **bpf_perf_event_output**\ () call in the kernel. - By default read the number of CPUs on the system and - install perf ring for each CPU in the corresponding index - in the array. + Install perf rings into a perf event array map and dump output of any + **bpf_perf_event_output**\ () call in the kernel. By default read the + number of CPUs on the system and install perf ring for each CPU in the + corresponding index in the array. - If **cpu** and **index** are specified, install perf ring - for given **cpu** at **index** in the array (single ring). + If **cpu** and **index** are specified, install perf ring for given **cpu** + at **index** in the array (single ring). - Note that installing a perf ring into an array will silently - replace any existing ring. Any other application will stop - receiving events if it installed its rings earlier. + Note that installing a perf ring into an array will silently replace any + existing ring. Any other application will stop receiving events if it + installed its rings earlier. - **bpftool map peek** *MAP* - Peek next value in the queue or stack. +bpftool map peek *MAP* + Peek next value in the queue or stack. - **bpftool map push** *MAP* **value** *VALUE* - Push *VALUE* onto the stack. +bpftool map push *MAP* value *VALUE* + Push *VALUE* onto the stack. - **bpftool map pop** *MAP* - Pop and print value from the stack. +bpftool map pop *MAP* + Pop and print value from the stack. - **bpftool map enqueue** *MAP* **value** *VALUE* - Enqueue *VALUE* into the queue. +bpftool map enqueue *MAP* value *VALUE* + Enqueue *VALUE* into the queue. - **bpftool map dequeue** *MAP* - Dequeue and print value from the queue. +bpftool map dequeue *MAP* + Dequeue and print value from the queue. - **bpftool map freeze** *MAP* - Freeze the map as read-only from user space. Entries from a - frozen map can not longer be updated or deleted with the - **bpf**\ () system call. This operation is not reversible, - and the map remains immutable from user space until its - destruction. However, read and write permissions for BPF - programs to the map remain unchanged. +bpftool map freeze *MAP* + Freeze the map as read-only from user space. Entries from a frozen map can + not longer be updated or deleted with the **bpf**\ () system call. This + operation is not reversible, and the map remains immutable from user space + until its destruction. However, read and write permissions for BPF programs + to the map remain unchanged. - **bpftool map help** - Print short help message. +bpftool map help + Print short help message. OPTIONS ======= - .. include:: common_options.rst +.. include:: common_options.rst - -f, --bpffs - Show file names of pinned maps. +-f, --bpffs + Show file names of pinned maps. - -n, --nomount - Do not automatically attempt to mount any virtual file system - (such as tracefs or BPF virtual file system) when necessary. +-n, --nomount + Do not automatically attempt to mount any virtual file system (such as + tracefs or BPF virtual file system) when necessary. EXAMPLES ======== diff --git a/tools/bpf/bpftool/Documentation/bpftool-net.rst b/tools/bpf/bpftool/Documentation/bpftool-net.rst index dd3f946976..3488128812 100644 --- a/tools/bpf/bpftool/Documentation/bpftool-net.rst +++ b/tools/bpf/bpftool/Documentation/bpftool-net.rst @@ -14,76 +14,74 @@ tool for inspection of networking related bpf prog attachments SYNOPSIS ======== - **bpftool** [*OPTIONS*] **net** *COMMAND* +**bpftool** [*OPTIONS*] **net** *COMMAND* - *OPTIONS* := { |COMMON_OPTIONS| } +*OPTIONS* := { |COMMON_OPTIONS| } - *COMMANDS* := - { **show** | **list** | **attach** | **detach** | **help** } +*COMMANDS* := { **show** | **list** | **attach** | **detach** | **help** } NET COMMANDS ============ -| **bpftool** **net** { **show** | **list** } [ **dev** *NAME* ] -| **bpftool** **net attach** *ATTACH_TYPE* *PROG* **dev** *NAME* [ **overwrite** ] -| **bpftool** **net detach** *ATTACH_TYPE* **dev** *NAME* -| **bpftool** **net help** +| **bpftool** **net** { **show** | **list** } [ **dev** *NAME* ] +| **bpftool** **net attach** *ATTACH_TYPE* *PROG* **dev** *NAME* [ **overwrite** ] +| **bpftool** **net detach** *ATTACH_TYPE* **dev** *NAME* +| **bpftool** **net help** | -| *PROG* := { **id** *PROG_ID* | **pinned** *FILE* | **tag** *PROG_TAG* } -| *ATTACH_TYPE* := { **xdp** | **xdpgeneric** | **xdpdrv** | **xdpoffload** } +| *PROG* := { **id** *PROG_ID* | **pinned** *FILE* | **tag** *PROG_TAG* | **name** *PROG_NAME* } +| *ATTACH_TYPE* := { **xdp** | **xdpgeneric** | **xdpdrv** | **xdpoffload** } DESCRIPTION =========== - **bpftool net { show | list }** [ **dev** *NAME* ] - List bpf program attachments in the kernel networking subsystem. - - Currently, device driver xdp attachments, tcx, netkit and old-style tc - classifier/action attachments, flow_dissector as well as netfilter - attachments are implemented, i.e., for - program types **BPF_PROG_TYPE_XDP**, **BPF_PROG_TYPE_SCHED_CLS**, - **BPF_PROG_TYPE_SCHED_ACT**, **BPF_PROG_TYPE_FLOW_DISSECTOR**, - **BPF_PROG_TYPE_NETFILTER**. - - For programs attached to a particular cgroup, e.g., - **BPF_PROG_TYPE_CGROUP_SKB**, **BPF_PROG_TYPE_CGROUP_SOCK**, - **BPF_PROG_TYPE_SOCK_OPS** and **BPF_PROG_TYPE_CGROUP_SOCK_ADDR**, - users can use **bpftool cgroup** to dump cgroup attachments. - For sk_{filter, skb, msg, reuseport} and lwt/seg6 - bpf programs, users should consult other tools, e.g., iproute2. - - The current output will start with all xdp program attachments, followed by - all tcx, netkit, then tc class/qdisc bpf program attachments, then flow_dissector - and finally netfilter programs. Both xdp programs and tcx/netkit/tc programs are - ordered based on ifindex number. If multiple bpf programs attached - to the same networking device through **tc**, the order will be first - all bpf programs attached to tcx, netkit, then tc classes, then all bpf programs - attached to non clsact qdiscs, and finally all bpf programs attached - to root and clsact qdisc. - - **bpftool** **net attach** *ATTACH_TYPE* *PROG* **dev** *NAME* [ **overwrite** ] - Attach bpf program *PROG* to network interface *NAME* with - type specified by *ATTACH_TYPE*. Previously attached bpf program - can be replaced by the command used with **overwrite** option. - Currently, only XDP-related modes are supported for *ATTACH_TYPE*. - - *ATTACH_TYPE* can be of: - **xdp** - try native XDP and fallback to generic XDP if NIC driver does not support it; - **xdpgeneric** - Generic XDP. runs at generic XDP hook when packet already enters receive path as skb; - **xdpdrv** - Native XDP. runs earliest point in driver's receive path; - **xdpoffload** - Offload XDP. runs directly on NIC on each packet reception; - - **bpftool** **net detach** *ATTACH_TYPE* **dev** *NAME* - Detach bpf program attached to network interface *NAME* with - type specified by *ATTACH_TYPE*. To detach bpf program, same - *ATTACH_TYPE* previously used for attach must be specified. - Currently, only XDP-related modes are supported for *ATTACH_TYPE*. - - **bpftool net help** - Print short help message. +bpftool net { show | list } [ dev *NAME* ] + List bpf program attachments in the kernel networking subsystem. + + Currently, device driver xdp attachments, tcx, netkit and old-style tc + classifier/action attachments, flow_dissector as well as netfilter + attachments are implemented, i.e., for program types **BPF_PROG_TYPE_XDP**, + **BPF_PROG_TYPE_SCHED_CLS**, **BPF_PROG_TYPE_SCHED_ACT**, + **BPF_PROG_TYPE_FLOW_DISSECTOR**, **BPF_PROG_TYPE_NETFILTER**. + + For programs attached to a particular cgroup, e.g., + **BPF_PROG_TYPE_CGROUP_SKB**, **BPF_PROG_TYPE_CGROUP_SOCK**, + **BPF_PROG_TYPE_SOCK_OPS** and **BPF_PROG_TYPE_CGROUP_SOCK_ADDR**, users + can use **bpftool cgroup** to dump cgroup attachments. For sk_{filter, skb, + msg, reuseport} and lwt/seg6 bpf programs, users should consult other + tools, e.g., iproute2. + + The current output will start with all xdp program attachments, followed by + all tcx, netkit, then tc class/qdisc bpf program attachments, then + flow_dissector and finally netfilter programs. Both xdp programs and + tcx/netkit/tc programs are ordered based on ifindex number. If multiple bpf + programs attached to the same networking device through **tc**, the order + will be first all bpf programs attached to tcx, netkit, then tc classes, + then all bpf programs attached to non clsact qdiscs, and finally all bpf + programs attached to root and clsact qdisc. + +bpftool net attach *ATTACH_TYPE* *PROG* dev *NAME* [ overwrite ] + Attach bpf program *PROG* to network interface *NAME* with type specified + by *ATTACH_TYPE*. Previously attached bpf program can be replaced by the + command used with **overwrite** option. Currently, only XDP-related modes + are supported for *ATTACH_TYPE*. + + *ATTACH_TYPE* can be of: + **xdp** - try native XDP and fallback to generic XDP if NIC driver does not support it; + **xdpgeneric** - Generic XDP. runs at generic XDP hook when packet already enters receive path as skb; + **xdpdrv** - Native XDP. runs earliest point in driver's receive path; + **xdpoffload** - Offload XDP. runs directly on NIC on each packet reception; + +bpftool net detach *ATTACH_TYPE* dev *NAME* + Detach bpf program attached to network interface *NAME* with type specified + by *ATTACH_TYPE*. To detach bpf program, same *ATTACH_TYPE* previously used + for attach must be specified. Currently, only XDP-related modes are + supported for *ATTACH_TYPE*. + +bpftool net help + Print short help message. OPTIONS ======= - .. include:: common_options.rst +.. include:: common_options.rst EXAMPLES ======== diff --git a/tools/bpf/bpftool/Documentation/bpftool-perf.rst b/tools/bpf/bpftool/Documentation/bpftool-perf.rst index 5fea633a82..8c1ae55be5 100644 --- a/tools/bpf/bpftool/Documentation/bpftool-perf.rst +++ b/tools/bpf/bpftool/Documentation/bpftool-perf.rst @@ -14,37 +14,37 @@ tool for inspection of perf related bpf prog attachments SYNOPSIS ======== - **bpftool** [*OPTIONS*] **perf** *COMMAND* +**bpftool** [*OPTIONS*] **perf** *COMMAND* - *OPTIONS* := { |COMMON_OPTIONS| } +*OPTIONS* := { |COMMON_OPTIONS| } - *COMMANDS* := - { **show** | **list** | **help** } +*COMMANDS* := +{ **show** | **list** | **help** } PERF COMMANDS ============= -| **bpftool** **perf** { **show** | **list** } -| **bpftool** **perf help** +| **bpftool** **perf** { **show** | **list** } +| **bpftool** **perf help** DESCRIPTION =========== - **bpftool perf { show | list }** - List all raw_tracepoint, tracepoint, kprobe attachment in the system. +bpftool perf { show | list } + List all raw_tracepoint, tracepoint, kprobe attachment in the system. - Output will start with process id and file descriptor in that process, - followed by bpf program id, attachment information, and attachment point. - The attachment point for raw_tracepoint/tracepoint is the trace probe name. - The attachment point for k[ret]probe is either symbol name and offset, - or a kernel virtual address. - The attachment point for u[ret]probe is the file name and the file offset. + Output will start with process id and file descriptor in that process, + followed by bpf program id, attachment information, and attachment point. + The attachment point for raw_tracepoint/tracepoint is the trace probe name. + The attachment point for k[ret]probe is either symbol name and offset, or a + kernel virtual address. The attachment point for u[ret]probe is the file + name and the file offset. - **bpftool perf help** - Print short help message. +bpftool perf help + Print short help message. OPTIONS ======= - .. include:: common_options.rst +.. include:: common_options.rst EXAMPLES ======== diff --git a/tools/bpf/bpftool/Documentation/bpftool-prog.rst b/tools/bpf/bpftool/Documentation/bpftool-prog.rst index 58e6a5b10e..d6304e01af 100644 --- a/tools/bpf/bpftool/Documentation/bpftool-prog.rst +++ b/tools/bpf/bpftool/Documentation/bpftool-prog.rst @@ -14,250 +14,226 @@ tool for inspection and simple manipulation of eBPF progs SYNOPSIS ======== - **bpftool** [*OPTIONS*] **prog** *COMMAND* +**bpftool** [*OPTIONS*] **prog** *COMMAND* - *OPTIONS* := { |COMMON_OPTIONS| | - { **-f** | **--bpffs** } | { **-m** | **--mapcompat** } | { **-n** | **--nomount** } | - { **-L** | **--use-loader** } } +*OPTIONS* := { |COMMON_OPTIONS| | +{ **-f** | **--bpffs** } | { **-m** | **--mapcompat** } | { **-n** | **--nomount** } | +{ **-L** | **--use-loader** } } - *COMMANDS* := - { **show** | **list** | **dump xlated** | **dump jited** | **pin** | **load** | - **loadall** | **help** } +*COMMANDS* := +{ **show** | **list** | **dump xlated** | **dump jited** | **pin** | **load** | +**loadall** | **help** } PROG COMMANDS ============= -| **bpftool** **prog** { **show** | **list** } [*PROG*] -| **bpftool** **prog dump xlated** *PROG* [{ **file** *FILE* | [**opcodes**] [**linum**] [**visual**] }] -| **bpftool** **prog dump jited** *PROG* [{ **file** *FILE* | [**opcodes**] [**linum**] }] -| **bpftool** **prog pin** *PROG* *FILE* -| **bpftool** **prog** { **load** | **loadall** } *OBJ* *PATH* [**type** *TYPE*] [**map** { **idx** *IDX* | **name** *NAME* } *MAP*] [{ **offload_dev** | **xdpmeta_dev** } *NAME*] [**pinmaps** *MAP_DIR*] [**autoattach**] -| **bpftool** **prog attach** *PROG* *ATTACH_TYPE* [*MAP*] -| **bpftool** **prog detach** *PROG* *ATTACH_TYPE* [*MAP*] -| **bpftool** **prog tracelog** -| **bpftool** **prog run** *PROG* **data_in** *FILE* [**data_out** *FILE* [**data_size_out** *L*]] [**ctx_in** *FILE* [**ctx_out** *FILE* [**ctx_size_out** *M*]]] [**repeat** *N*] -| **bpftool** **prog profile** *PROG* [**duration** *DURATION*] *METRICs* -| **bpftool** **prog help** +| **bpftool** **prog** { **show** | **list** } [*PROG*] +| **bpftool** **prog dump xlated** *PROG* [{ **file** *FILE* | [**opcodes**] [**linum**] [**visual**] }] +| **bpftool** **prog dump jited** *PROG* [{ **file** *FILE* | [**opcodes**] [**linum**] }] +| **bpftool** **prog pin** *PROG* *FILE* +| **bpftool** **prog** { **load** | **loadall** } *OBJ* *PATH* [**type** *TYPE*] [**map** { **idx** *IDX* | **name** *NAME* } *MAP*] [{ **offload_dev** | **xdpmeta_dev** } *NAME*] [**pinmaps** *MAP_DIR*] [**autoattach**] +| **bpftool** **prog attach** *PROG* *ATTACH_TYPE* [*MAP*] +| **bpftool** **prog detach** *PROG* *ATTACH_TYPE* [*MAP*] +| **bpftool** **prog tracelog** +| **bpftool** **prog run** *PROG* **data_in** *FILE* [**data_out** *FILE* [**data_size_out** *L*]] [**ctx_in** *FILE* [**ctx_out** *FILE* [**ctx_size_out** *M*]]] [**repeat** *N*] +| **bpftool** **prog profile** *PROG* [**duration** *DURATION*] *METRICs* +| **bpftool** **prog help** | -| *MAP* := { **id** *MAP_ID* | **pinned** *FILE* } -| *PROG* := { **id** *PROG_ID* | **pinned** *FILE* | **tag** *PROG_TAG* | **name** *PROG_NAME* } -| *TYPE* := { -| **socket** | **kprobe** | **kretprobe** | **classifier** | **action** | -| **tracepoint** | **raw_tracepoint** | **xdp** | **perf_event** | **cgroup/skb** | -| **cgroup/sock** | **cgroup/dev** | **lwt_in** | **lwt_out** | **lwt_xmit** | -| **lwt_seg6local** | **sockops** | **sk_skb** | **sk_msg** | **lirc_mode2** | -| **cgroup/bind4** | **cgroup/bind6** | **cgroup/post_bind4** | **cgroup/post_bind6** | -| **cgroup/connect4** | **cgroup/connect6** | **cgroup/connect_unix** | -| **cgroup/getpeername4** | **cgroup/getpeername6** | **cgroup/getpeername_unix** | -| **cgroup/getsockname4** | **cgroup/getsockname6** | **cgroup/getsockname_unix** | -| **cgroup/sendmsg4** | **cgroup/sendmsg6** | **cgroup/sendmsg_unix** | -| **cgroup/recvmsg4** | **cgroup/recvmsg6** | **cgroup/recvmsg_unix** | **cgroup/sysctl** | -| **cgroup/getsockopt** | **cgroup/setsockopt** | **cgroup/sock_release** | -| **struct_ops** | **fentry** | **fexit** | **freplace** | **sk_lookup** -| } -| *ATTACH_TYPE* := { -| **sk_msg_verdict** | **sk_skb_verdict** | **sk_skb_stream_verdict** | -| **sk_skb_stream_parser** | **flow_dissector** -| } -| *METRICs* := { -| **cycles** | **instructions** | **l1d_loads** | **llc_misses** | -| **itlb_misses** | **dtlb_misses** -| } +| *MAP* := { **id** *MAP_ID* | **pinned** *FILE* | **name** *MAP_NAME* } +| *PROG* := { **id** *PROG_ID* | **pinned** *FILE* | **tag** *PROG_TAG* | **name** *PROG_NAME* } +| *TYPE* := { +| **socket** | **kprobe** | **kretprobe** | **classifier** | **action** | +| **tracepoint** | **raw_tracepoint** | **xdp** | **perf_event** | **cgroup/skb** | +| **cgroup/sock** | **cgroup/dev** | **lwt_in** | **lwt_out** | **lwt_xmit** | +| **lwt_seg6local** | **sockops** | **sk_skb** | **sk_msg** | **lirc_mode2** | +| **cgroup/bind4** | **cgroup/bind6** | **cgroup/post_bind4** | **cgroup/post_bind6** | +| **cgroup/connect4** | **cgroup/connect6** | **cgroup/connect_unix** | +| **cgroup/getpeername4** | **cgroup/getpeername6** | **cgroup/getpeername_unix** | +| **cgroup/getsockname4** | **cgroup/getsockname6** | **cgroup/getsockname_unix** | +| **cgroup/sendmsg4** | **cgroup/sendmsg6** | **cgroup/sendmsg_unix** | +| **cgroup/recvmsg4** | **cgroup/recvmsg6** | **cgroup/recvmsg_unix** | **cgroup/sysctl** | +| **cgroup/getsockopt** | **cgroup/setsockopt** | **cgroup/sock_release** | +| **struct_ops** | **fentry** | **fexit** | **freplace** | **sk_lookup** +| } +| *ATTACH_TYPE* := { +| **sk_msg_verdict** | **sk_skb_verdict** | **sk_skb_stream_verdict** | +| **sk_skb_stream_parser** | **flow_dissector** +| } +| *METRICs* := { +| **cycles** | **instructions** | **l1d_loads** | **llc_misses** | +| **itlb_misses** | **dtlb_misses** +| } DESCRIPTION =========== - **bpftool prog { show | list }** [*PROG*] - Show information about loaded programs. If *PROG* is - specified show information only about given programs, - otherwise list all programs currently loaded on the system. - In case of **tag** or **name**, *PROG* may match several - programs which will all be shown. - - Output will start with program ID followed by program type and - zero or more named attributes (depending on kernel version). - - Since Linux 5.1 the kernel can collect statistics on BPF - programs (such as the total time spent running the program, - and the number of times it was run). If available, bpftool - shows such statistics. However, the kernel does not collect - them by defaults, as it slightly impacts performance on each - program run. Activation or deactivation of the feature is - performed via the **kernel.bpf_stats_enabled** sysctl knob. - - Since Linux 5.8 bpftool is able to discover information about - processes that hold open file descriptors (FDs) against BPF - programs. On such kernels bpftool will automatically emit this - information as well. - - **bpftool prog dump xlated** *PROG* [{ **file** *FILE* | [**opcodes**] [**linum**] [**visual**] }] - Dump eBPF instructions of the programs from the kernel. By - default, eBPF will be disassembled and printed to standard - output in human-readable format. In this case, **opcodes** - controls if raw opcodes should be printed as well. - - In case of **tag** or **name**, *PROG* may match several - programs which will all be dumped. However, if **file** or - **visual** is specified, *PROG* must match a single program. - - If **file** is specified, the binary image will instead be - written to *FILE*. - - If **visual** is specified, control flow graph (CFG) will be - built instead, and eBPF instructions will be presented with - CFG in DOT format, on standard output. - - If the programs have line_info available, the source line will - be displayed. If **linum** is specified, the filename, line - number and line column will also be displayed. - - **bpftool prog dump jited** *PROG* [{ **file** *FILE* | [**opcodes**] [**linum**] }] - Dump jited image (host machine code) of the program. - - If *FILE* is specified image will be written to a file, - otherwise it will be disassembled and printed to stdout. - *PROG* must match a single program when **file** is specified. - - **opcodes** controls if raw opcodes will be printed. - - If the prog has line_info available, the source line will - be displayed. If **linum** is specified, the filename, line - number and line column will also be displayed. - - **bpftool prog pin** *PROG* *FILE* - Pin program *PROG* as *FILE*. - - Note: *FILE* must be located in *bpffs* mount. It must not - contain a dot character ('.'), which is reserved for future - extensions of *bpffs*. - - **bpftool prog { load | loadall }** *OBJ* *PATH* [**type** *TYPE*] [**map** { **idx** *IDX* | **name** *NAME* } *MAP*] [{ **offload_dev** | **xdpmeta_dev** } *NAME*] [**pinmaps** *MAP_DIR*] [**autoattach**] - Load bpf program(s) from binary *OBJ* and pin as *PATH*. - **bpftool prog load** pins only the first program from the - *OBJ* as *PATH*. **bpftool prog loadall** pins all programs - from the *OBJ* under *PATH* directory. - **type** is optional, if not specified program type will be - inferred from section names. - By default bpftool will create new maps as declared in the ELF - object being loaded. **map** parameter allows for the reuse - of existing maps. It can be specified multiple times, each - time for a different map. *IDX* refers to index of the map - to be replaced in the ELF file counting from 0, while *NAME* - allows to replace a map by name. *MAP* specifies the map to - use, referring to it by **id** or through a **pinned** file. - If **offload_dev** *NAME* is specified program will be loaded - onto given networking device (offload). - If **xdpmeta_dev** *NAME* is specified program will become - device-bound without offloading, this facilitates access - to XDP metadata. - Optional **pinmaps** argument can be provided to pin all - maps under *MAP_DIR* directory. - - If **autoattach** is specified program will be attached - before pin. In that case, only the link (representing the - program attached to its hook) is pinned, not the program as - such, so the path won't show in **bpftool prog show -f**, - only show in **bpftool link show -f**. Also, this only works - when bpftool (libbpf) is able to infer all necessary - information from the object file, in particular, it's not - supported for all program types. If a program does not - support autoattach, bpftool falls back to regular pinning - for that program instead. - - Note: *PATH* must be located in *bpffs* mount. It must not - contain a dot character ('.'), which is reserved for future - extensions of *bpffs*. - - **bpftool prog attach** *PROG* *ATTACH_TYPE* [*MAP*] - Attach bpf program *PROG* (with type specified by - *ATTACH_TYPE*). Most *ATTACH_TYPEs* require a *MAP* - parameter, with the exception of *flow_dissector* which is - attached to current networking name space. - - **bpftool prog detach** *PROG* *ATTACH_TYPE* [*MAP*] - Detach bpf program *PROG* (with type specified by - *ATTACH_TYPE*). Most *ATTACH_TYPEs* require a *MAP* - parameter, with the exception of *flow_dissector* which is - detached from the current networking name space. - - **bpftool prog tracelog** - Dump the trace pipe of the system to the console (stdout). - Hit to stop printing. BPF programs can write to this - trace pipe at runtime with the **bpf_trace_printk**\ () helper. - This should be used only for debugging purposes. For - streaming data from BPF programs to user space, one can use - perf events (see also **bpftool-map**\ (8)). - - **bpftool prog run** *PROG* **data_in** *FILE* [**data_out** *FILE* [**data_size_out** *L*]] [**ctx_in** *FILE* [**ctx_out** *FILE* [**ctx_size_out** *M*]]] [**repeat** *N*] - Run BPF program *PROG* in the kernel testing infrastructure - for BPF, meaning that the program works on the data and - context provided by the user, and not on actual packets or - monitored functions etc. Return value and duration for the - test run are printed out to the console. - - Input data is read from the *FILE* passed with **data_in**. - If this *FILE* is "**-**", input data is read from standard - input. Input context, if any, is read from *FILE* passed with - **ctx_in**. Again, "**-**" can be used to read from standard - input, but only if standard input is not already in use for - input data. If a *FILE* is passed with **data_out**, output - data is written to that file. Similarly, output context is - written to the *FILE* passed with **ctx_out**. For both - output flows, "**-**" can be used to print to the standard - output (as plain text, or JSON if relevant option was - passed). If output keywords are omitted, output data and - context are discarded. Keywords **data_size_out** and - **ctx_size_out** are used to pass the size (in bytes) for the - output buffers to the kernel, although the default of 32 kB - should be more than enough for most cases. - - Keyword **repeat** is used to indicate the number of - consecutive runs to perform. Note that output data and - context printed to files correspond to the last of those - runs. The duration printed out at the end of the runs is an - average over all runs performed by the command. - - Not all program types support test run. Among those which do, - not all of them can take the **ctx_in**/**ctx_out** - arguments. bpftool does not perform checks on program types. - - **bpftool prog profile** *PROG* [**duration** *DURATION*] *METRICs* - Profile *METRICs* for bpf program *PROG* for *DURATION* - seconds or until user hits . *DURATION* is optional. - If *DURATION* is not specified, the profiling will run up to - **UINT_MAX** seconds. - - **bpftool prog help** - Print short help message. +bpftool prog { show | list } [*PROG*] + Show information about loaded programs. If *PROG* is specified show + information only about given programs, otherwise list all programs + currently loaded on the system. In case of **tag** or **name**, *PROG* may + match several programs which will all be shown. + + Output will start with program ID followed by program type and zero or more + named attributes (depending on kernel version). + + Since Linux 5.1 the kernel can collect statistics on BPF programs (such as + the total time spent running the program, and the number of times it was + run). If available, bpftool shows such statistics. However, the kernel does + not collect them by defaults, as it slightly impacts performance on each + program run. Activation or deactivation of the feature is performed via the + **kernel.bpf_stats_enabled** sysctl knob. + + Since Linux 5.8 bpftool is able to discover information about processes + that hold open file descriptors (FDs) against BPF programs. On such kernels + bpftool will automatically emit this information as well. + +bpftool prog dump xlated *PROG* [{ file *FILE* | [opcodes] [linum] [visual] }] + Dump eBPF instructions of the programs from the kernel. By default, eBPF + will be disassembled and printed to standard output in human-readable + format. In this case, **opcodes** controls if raw opcodes should be printed + as well. + + In case of **tag** or **name**, *PROG* may match several programs which + will all be dumped. However, if **file** or **visual** is specified, + *PROG* must match a single program. + + If **file** is specified, the binary image will instead be written to + *FILE*. + + If **visual** is specified, control flow graph (CFG) will be built instead, + and eBPF instructions will be presented with CFG in DOT format, on standard + output. + + If the programs have line_info available, the source line will be + displayed. If **linum** is specified, the filename, line number and line + column will also be displayed. + +bpftool prog dump jited *PROG* [{ file *FILE* | [opcodes] [linum] }] + Dump jited image (host machine code) of the program. + + If *FILE* is specified image will be written to a file, otherwise it will + be disassembled and printed to stdout. *PROG* must match a single program + when **file** is specified. + + **opcodes** controls if raw opcodes will be printed. + + If the prog has line_info available, the source line will be displayed. If + **linum** is specified, the filename, line number and line column will also + be displayed. + +bpftool prog pin *PROG* *FILE* + Pin program *PROG* as *FILE*. + + Note: *FILE* must be located in *bpffs* mount. It must not contain a dot + character ('.'), which is reserved for future extensions of *bpffs*. + +bpftool prog { load | loadall } *OBJ* *PATH* [type *TYPE*] [map { idx *IDX* | name *NAME* } *MAP*] [{ offload_dev | xdpmeta_dev } *NAME*] [pinmaps *MAP_DIR*] [autoattach] + Load bpf program(s) from binary *OBJ* and pin as *PATH*. **bpftool prog + load** pins only the first program from the *OBJ* as *PATH*. **bpftool prog + loadall** pins all programs from the *OBJ* under *PATH* directory. **type** + is optional, if not specified program type will be inferred from section + names. By default bpftool will create new maps as declared in the ELF + object being loaded. **map** parameter allows for the reuse of existing + maps. It can be specified multiple times, each time for a different map. + *IDX* refers to index of the map to be replaced in the ELF file counting + from 0, while *NAME* allows to replace a map by name. *MAP* specifies the + map to use, referring to it by **id** or through a **pinned** file. If + **offload_dev** *NAME* is specified program will be loaded onto given + networking device (offload). If **xdpmeta_dev** *NAME* is specified program + will become device-bound without offloading, this facilitates access to XDP + metadata. Optional **pinmaps** argument can be provided to pin all maps + under *MAP_DIR* directory. + + If **autoattach** is specified program will be attached before pin. In that + case, only the link (representing the program attached to its hook) is + pinned, not the program as such, so the path won't show in **bpftool prog + show -f**, only show in **bpftool link show -f**. Also, this only works + when bpftool (libbpf) is able to infer all necessary information from the + object file, in particular, it's not supported for all program types. If a + program does not support autoattach, bpftool falls back to regular pinning + for that program instead. + + Note: *PATH* must be located in *bpffs* mount. It must not contain a dot + character ('.'), which is reserved for future extensions of *bpffs*. + +bpftool prog attach *PROG* *ATTACH_TYPE* [*MAP*] + Attach bpf program *PROG* (with type specified by *ATTACH_TYPE*). Most + *ATTACH_TYPEs* require a *MAP* parameter, with the exception of + *flow_dissector* which is attached to current networking name space. + +bpftool prog detach *PROG* *ATTACH_TYPE* [*MAP*] + Detach bpf program *PROG* (with type specified by *ATTACH_TYPE*). Most + *ATTACH_TYPEs* require a *MAP* parameter, with the exception of + *flow_dissector* which is detached from the current networking name space. + +bpftool prog tracelog + Dump the trace pipe of the system to the console (stdout). Hit to + stop printing. BPF programs can write to this trace pipe at runtime with + the **bpf_trace_printk**\ () helper. This should be used only for debugging + purposes. For streaming data from BPF programs to user space, one can use + perf events (see also **bpftool-map**\ (8)). + +bpftool prog run *PROG* data_in *FILE* [data_out *FILE* [data_size_out *L*]] [ctx_in *FILE* [ctx_out *FILE* [ctx_size_out *M*]]] [repeat *N*] + Run BPF program *PROG* in the kernel testing infrastructure for BPF, + meaning that the program works on the data and context provided by the + user, and not on actual packets or monitored functions etc. Return value + and duration for the test run are printed out to the console. + + Input data is read from the *FILE* passed with **data_in**. If this *FILE* + is "**-**", input data is read from standard input. Input context, if any, + is read from *FILE* passed with **ctx_in**. Again, "**-**" can be used to + read from standard input, but only if standard input is not already in use + for input data. If a *FILE* is passed with **data_out**, output data is + written to that file. Similarly, output context is written to the *FILE* + passed with **ctx_out**. For both output flows, "**-**" can be used to + print to the standard output (as plain text, or JSON if relevant option was + passed). If output keywords are omitted, output data and context are + discarded. Keywords **data_size_out** and **ctx_size_out** are used to pass + the size (in bytes) for the output buffers to the kernel, although the + default of 32 kB should be more than enough for most cases. + + Keyword **repeat** is used to indicate the number of consecutive runs to + perform. Note that output data and context printed to files correspond to + the last of those runs. The duration printed out at the end of the runs is + an average over all runs performed by the command. + + Not all program types support test run. Among those which do, not all of + them can take the **ctx_in**/**ctx_out** arguments. bpftool does not + perform checks on program types. + +bpftool prog profile *PROG* [duration *DURATION*] *METRICs* + Profile *METRICs* for bpf program *PROG* for *DURATION* seconds or until + user hits . *DURATION* is optional. If *DURATION* is not specified, + the profiling will run up to **UINT_MAX** seconds. + +bpftool prog help + Print short help message. OPTIONS ======= - .. include:: common_options.rst - - -f, --bpffs - When showing BPF programs, show file names of pinned - programs. - - -m, --mapcompat - Allow loading maps with unknown map definitions. - - -n, --nomount - Do not automatically attempt to mount any virtual file system - (such as tracefs or BPF virtual file system) when necessary. - - -L, --use-loader - Load program as a "loader" program. This is useful to debug - the generation of such programs. When this option is in - use, bpftool attempts to load the programs from the object - file into the kernel, but does not pin them (therefore, the - *PATH* must not be provided). - - When combined with the **-d**\ \|\ **--debug** option, - additional debug messages are generated, and the execution - of the loader program will use the **bpf_trace_printk**\ () - helper to log each step of loading BTF, creating the maps, - and loading the programs (see **bpftool prog tracelog** as - a way to dump those messages). +.. include:: common_options.rst + +-f, --bpffs + When showing BPF programs, show file names of pinned programs. + +-m, --mapcompat + Allow loading maps with unknown map definitions. + +-n, --nomount + Do not automatically attempt to mount any virtual file system (such as + tracefs or BPF virtual file system) when necessary. + +-L, --use-loader + Load program as a "loader" program. This is useful to debug the generation + of such programs. When this option is in use, bpftool attempts to load the + programs from the object file into the kernel, but does not pin them + (therefore, the *PATH* must not be provided). + + When combined with the **-d**\ \|\ **--debug** option, additional debug + messages are generated, and the execution of the loader program will use + the **bpf_trace_printk**\ () helper to log each step of loading BTF, + creating the maps, and loading the programs (see **bpftool prog tracelog** + as a way to dump those messages). EXAMPLES ======== diff --git a/tools/bpf/bpftool/Documentation/bpftool-struct_ops.rst b/tools/bpf/bpftool/Documentation/bpftool-struct_ops.rst index 8022b5321d..e871b9539a 100644 --- a/tools/bpf/bpftool/Documentation/bpftool-struct_ops.rst +++ b/tools/bpf/bpftool/Documentation/bpftool-struct_ops.rst @@ -14,61 +14,60 @@ tool to register/unregister/introspect BPF struct_ops SYNOPSIS ======== - **bpftool** [*OPTIONS*] **struct_ops** *COMMAND* +**bpftool** [*OPTIONS*] **struct_ops** *COMMAND* - *OPTIONS* := { |COMMON_OPTIONS| } +*OPTIONS* := { |COMMON_OPTIONS| } - *COMMANDS* := - { **show** | **list** | **dump** | **register** | **unregister** | **help** } +*COMMANDS* := +{ **show** | **list** | **dump** | **register** | **unregister** | **help** } STRUCT_OPS COMMANDS =================== -| **bpftool** **struct_ops { show | list }** [*STRUCT_OPS_MAP*] -| **bpftool** **struct_ops dump** [*STRUCT_OPS_MAP*] -| **bpftool** **struct_ops register** *OBJ* [*LINK_DIR*] -| **bpftool** **struct_ops unregister** *STRUCT_OPS_MAP* -| **bpftool** **struct_ops help** +| **bpftool** **struct_ops { show | list }** [*STRUCT_OPS_MAP*] +| **bpftool** **struct_ops dump** [*STRUCT_OPS_MAP*] +| **bpftool** **struct_ops register** *OBJ* [*LINK_DIR*] +| **bpftool** **struct_ops unregister** *STRUCT_OPS_MAP* +| **bpftool** **struct_ops help** | -| *STRUCT_OPS_MAP* := { **id** *STRUCT_OPS_MAP_ID* | **name** *STRUCT_OPS_MAP_NAME* } -| *OBJ* := /a/file/of/bpf_struct_ops.o +| *STRUCT_OPS_MAP* := { **id** *STRUCT_OPS_MAP_ID* | **name** *STRUCT_OPS_MAP_NAME* } +| *OBJ* := /a/file/of/bpf_struct_ops.o DESCRIPTION =========== - **bpftool struct_ops { show | list }** [*STRUCT_OPS_MAP*] - Show brief information about the struct_ops in the system. - If *STRUCT_OPS_MAP* is specified, it shows information only - for the given struct_ops. Otherwise, it lists all struct_ops - currently existing in the system. - - Output will start with struct_ops map ID, followed by its map - name and its struct_ops's kernel type. - - **bpftool struct_ops dump** [*STRUCT_OPS_MAP*] - Dump details information about the struct_ops in the system. - If *STRUCT_OPS_MAP* is specified, it dumps information only - for the given struct_ops. Otherwise, it dumps all struct_ops - currently existing in the system. - - **bpftool struct_ops register** *OBJ* [*LINK_DIR*] - Register bpf struct_ops from *OBJ*. All struct_ops under - the ELF section ".struct_ops" and ".struct_ops.link" will - be registered to its kernel subsystem. For each - struct_ops in the ".struct_ops.link" section, a link - will be created. You can give *LINK_DIR* to provide a - directory path where these links will be pinned with the - same name as their corresponding map name. - - **bpftool struct_ops unregister** *STRUCT_OPS_MAP* - Unregister the *STRUCT_OPS_MAP* from the kernel subsystem. - - **bpftool struct_ops help** - Print short help message. +bpftool struct_ops { show | list } [*STRUCT_OPS_MAP*] + Show brief information about the struct_ops in the system. If + *STRUCT_OPS_MAP* is specified, it shows information only for the given + struct_ops. Otherwise, it lists all struct_ops currently existing in the + system. + + Output will start with struct_ops map ID, followed by its map name and its + struct_ops's kernel type. + +bpftool struct_ops dump [*STRUCT_OPS_MAP*] + Dump details information about the struct_ops in the system. If + *STRUCT_OPS_MAP* is specified, it dumps information only for the given + struct_ops. Otherwise, it dumps all struct_ops currently existing in the + system. + +bpftool struct_ops register *OBJ* [*LINK_DIR*] + Register bpf struct_ops from *OBJ*. All struct_ops under the ELF section + ".struct_ops" and ".struct_ops.link" will be registered to its kernel + subsystem. For each struct_ops in the ".struct_ops.link" section, a link + will be created. You can give *LINK_DIR* to provide a directory path where + these links will be pinned with the same name as their corresponding map + name. + +bpftool struct_ops unregister *STRUCT_OPS_MAP* + Unregister the *STRUCT_OPS_MAP* from the kernel subsystem. + +bpftool struct_ops help + Print short help message. OPTIONS ======= - .. include:: common_options.rst +.. include:: common_options.rst EXAMPLES ======== diff --git a/tools/bpf/bpftool/Documentation/bpftool.rst b/tools/bpf/bpftool/Documentation/bpftool.rst index 09e4f2ff56..f38ae5c404 100644 --- a/tools/bpf/bpftool/Documentation/bpftool.rst +++ b/tools/bpf/bpftool/Documentation/bpftool.rst @@ -14,57 +14,57 @@ tool for inspection and simple manipulation of eBPF programs and maps SYNOPSIS ======== - **bpftool** [*OPTIONS*] *OBJECT* { *COMMAND* | **help** } +**bpftool** [*OPTIONS*] *OBJECT* { *COMMAND* | **help** } - **bpftool** **batch file** *FILE* +**bpftool** **batch file** *FILE* - **bpftool** **version** +**bpftool** **version** - *OBJECT* := { **map** | **prog** | **link** | **cgroup** | **perf** | **net** | **feature** | - **btf** | **gen** | **struct_ops** | **iter** } +*OBJECT* := { **map** | **prog** | **link** | **cgroup** | **perf** | **net** | **feature** | +**btf** | **gen** | **struct_ops** | **iter** } - *OPTIONS* := { { **-V** | **--version** } | |COMMON_OPTIONS| } +*OPTIONS* := { { **-V** | **--version** } | |COMMON_OPTIONS| } - *MAP-COMMANDS* := - { **show** | **list** | **create** | **dump** | **update** | **lookup** | **getnext** | - **delete** | **pin** | **event_pipe** | **help** } +*MAP-COMMANDS* := +{ **show** | **list** | **create** | **dump** | **update** | **lookup** | **getnext** | +**delete** | **pin** | **event_pipe** | **help** } - *PROG-COMMANDS* := { **show** | **list** | **dump jited** | **dump xlated** | **pin** | - **load** | **attach** | **detach** | **help** } +*PROG-COMMANDS* := { **show** | **list** | **dump jited** | **dump xlated** | **pin** | +**load** | **attach** | **detach** | **help** } - *LINK-COMMANDS* := { **show** | **list** | **pin** | **detach** | **help** } +*LINK-COMMANDS* := { **show** | **list** | **pin** | **detach** | **help** } - *CGROUP-COMMANDS* := { **show** | **list** | **attach** | **detach** | **help** } +*CGROUP-COMMANDS* := { **show** | **list** | **attach** | **detach** | **help** } - *PERF-COMMANDS* := { **show** | **list** | **help** } +*PERF-COMMANDS* := { **show** | **list** | **help** } - *NET-COMMANDS* := { **show** | **list** | **help** } +*NET-COMMANDS* := { **show** | **list** | **help** } - *FEATURE-COMMANDS* := { **probe** | **help** } +*FEATURE-COMMANDS* := { **probe** | **help** } - *BTF-COMMANDS* := { **show** | **list** | **dump** | **help** } +*BTF-COMMANDS* := { **show** | **list** | **dump** | **help** } - *GEN-COMMANDS* := { **object** | **skeleton** | **min_core_btf** | **help** } +*GEN-COMMANDS* := { **object** | **skeleton** | **min_core_btf** | **help** } - *STRUCT-OPS-COMMANDS* := { **show** | **list** | **dump** | **register** | **unregister** | **help** } +*STRUCT-OPS-COMMANDS* := { **show** | **list** | **dump** | **register** | **unregister** | **help** } - *ITER-COMMANDS* := { **pin** | **help** } +*ITER-COMMANDS* := { **pin** | **help** } DESCRIPTION =========== - *bpftool* allows for inspection and simple modification of BPF objects - on the system. +*bpftool* allows for inspection and simple modification of BPF objects on the +system. - Note that format of the output of all tools is not guaranteed to be - stable and should not be depended upon. +Note that format of the output of all tools is not guaranteed to be stable and +should not be depended upon. OPTIONS ======= - .. include:: common_options.rst +.. include:: common_options.rst - -m, --mapcompat - Allow loading maps with unknown map definitions. +-m, --mapcompat + Allow loading maps with unknown map definitions. - -n, --nomount - Do not automatically attempt to mount any virtual file system - (such as tracefs or BPF virtual file system) when necessary. +-n, --nomount + Do not automatically attempt to mount any virtual file system (such as + tracefs or BPF virtual file system) when necessary. diff --git a/tools/bpf/bpftool/Documentation/common_options.rst b/tools/bpf/bpftool/Documentation/common_options.rst index 30df7a707f..9234b9dab7 100644 --- a/tools/bpf/bpftool/Documentation/common_options.rst +++ b/tools/bpf/bpftool/Documentation/common_options.rst @@ -1,25 +1,23 @@ .. SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -h, --help - Print short help message (similar to **bpftool help**). + Print short help message (similar to **bpftool help**). -V, --version - Print bpftool's version number (similar to **bpftool version**), the - number of the libbpf version in use, and optional features that were - included when bpftool was compiled. Optional features include linking - against LLVM or libbfd to provide the disassembler for JIT-ted - programs (**bpftool prog dump jited**) and usage of BPF skeletons - (some features like **bpftool prog profile** or showing pids - associated to BPF objects may rely on it). + Print bpftool's version number (similar to **bpftool version**), the number + of the libbpf version in use, and optional features that were included when + bpftool was compiled. Optional features include linking against LLVM or + libbfd to provide the disassembler for JIT-ted programs (**bpftool prog + dump jited**) and usage of BPF skeletons (some features like **bpftool prog + profile** or showing pids associated to BPF objects may rely on it). -j, --json - Generate JSON output. For commands that cannot produce JSON, this - option has no effect. + Generate JSON output. For commands that cannot produce JSON, this option + has no effect. -p, --pretty - Generate human-readable JSON output. Implies **-j**. + Generate human-readable JSON output. Implies **-j**. -d, --debug - Print all logs available, even debug-level information. This includes - logs from libbpf as well as from the verifier, when attempting to - load programs. + Print all logs available, even debug-level information. This includes logs + from libbpf as well as from the verifier, when attempting to load programs. diff --git a/tools/bpf/bpftool/Makefile b/tools/bpf/bpftool/Makefile index e9154ace80..dfa4f1bebb 100644 --- a/tools/bpf/bpftool/Makefile +++ b/tools/bpf/bpftool/Makefile @@ -89,6 +89,10 @@ ifneq ($(EXTRA_LDFLAGS),) LDFLAGS += $(EXTRA_LDFLAGS) endif +HOST_CFLAGS := $(subst -I$(LIBBPF_INCLUDE),-I$(LIBBPF_BOOTSTRAP_INCLUDE),\ + $(subst $(CLANG_CROSS_FLAGS),,$(CFLAGS))) +HOST_LDFLAGS := $(LDFLAGS) + INSTALL ?= install RM ?= rm -f @@ -143,7 +147,7 @@ ifeq ($(feature-llvm),1) # If LLVM is available, use it for JIT disassembly CFLAGS += -DHAVE_LLVM_SUPPORT LLVM_CONFIG_LIB_COMPONENTS := mcdisassembler all-targets - CFLAGS += $(shell $(LLVM_CONFIG) --cflags --libs $(LLVM_CONFIG_LIB_COMPONENTS)) + CFLAGS += $(shell $(LLVM_CONFIG) --cflags) LIBS += $(shell $(LLVM_CONFIG) --libs $(LLVM_CONFIG_LIB_COMPONENTS)) ifeq ($(shell $(LLVM_CONFIG) --shared-mode),static) LIBS += $(shell $(LLVM_CONFIG) --system-libs $(LLVM_CONFIG_LIB_COMPONENTS)) @@ -178,12 +182,9 @@ ifeq ($(filter -DHAVE_LLVM_SUPPORT -DHAVE_LIBBFD_SUPPORT,$(CFLAGS)),) SRCS := $(filter-out jit_disasm.c,$(SRCS)) endif -HOST_CFLAGS = $(subst -I$(LIBBPF_INCLUDE),-I$(LIBBPF_BOOTSTRAP_INCLUDE),\ - $(subst $(CLANG_CROSS_FLAGS),,$(CFLAGS))) - BPFTOOL_BOOTSTRAP := $(BOOTSTRAP_OUTPUT)bpftool -BOOTSTRAP_OBJS = $(addprefix $(BOOTSTRAP_OUTPUT),main.o common.o json_writer.o gen.o btf.o xlated_dumper.o btf_dumper.o disasm.o) +BOOTSTRAP_OBJS = $(addprefix $(BOOTSTRAP_OUTPUT),main.o common.o json_writer.o gen.o btf.o) $(BOOTSTRAP_OBJS): $(LIBBPF_BOOTSTRAP) OBJS = $(patsubst %.c,$(OUTPUT)%.o,$(SRCS)) $(OUTPUT)disasm.o @@ -231,14 +232,11 @@ endif CFLAGS += $(if $(BUILD_BPF_SKELS),,-DBPFTOOL_WITHOUT_SKELETONS) -$(BOOTSTRAP_OUTPUT)disasm.o: $(srctree)/kernel/bpf/disasm.c - $(QUIET_CC)$(HOSTCC) $(HOST_CFLAGS) -c -MMD $< -o $@ - $(OUTPUT)disasm.o: $(srctree)/kernel/bpf/disasm.c $(QUIET_CC)$(CC) $(CFLAGS) -c -MMD $< -o $@ $(BPFTOOL_BOOTSTRAP): $(BOOTSTRAP_OBJS) $(LIBBPF_BOOTSTRAP) - $(QUIET_LINK)$(HOSTCC) $(HOST_CFLAGS) $(LDFLAGS) $(BOOTSTRAP_OBJS) $(LIBS_BOOTSTRAP) -o $@ + $(QUIET_LINK)$(HOSTCC) $(HOST_CFLAGS) $(HOST_LDFLAGS) $(BOOTSTRAP_OBJS) $(LIBS_BOOTSTRAP) -o $@ $(OUTPUT)bpftool: $(OBJS) $(LIBBPF) $(QUIET_LINK)$(CC) $(CFLAGS) $(LDFLAGS) $(OBJS) $(LIBS) -o $@ diff --git a/tools/bpf/bpftool/bash-completion/bpftool b/tools/bpf/bpftool/bash-completion/bpftool index 6e4f7ce6bc..04afe2ac22 100644 --- a/tools/bpf/bpftool/bash-completion/bpftool +++ b/tools/bpf/bpftool/bash-completion/bpftool @@ -106,19 +106,19 @@ _bpftool_get_link_ids() _bpftool_get_obj_map_names() { - local obj + local obj maps obj=$1 - maps=$(objdump -j maps -t $obj 2>/dev/null | \ - command awk '/g . maps/ {print $NF}') + maps=$(objdump -j .maps -t $obj 2>/dev/null | \ + command awk '/g . .maps/ {print $NF}') COMPREPLY+=( $( compgen -W "$maps" -- "$cur" ) ) } _bpftool_get_obj_map_idxs() { - local obj + local obj nmaps obj=$1 @@ -136,7 +136,7 @@ _sysfs_get_netdevs() # Retrieve type of the map that we are operating on. _bpftool_map_guess_map_type() { - local keyword ref + local keyword idx ref="" for (( idx=3; idx < ${#words[@]}-1; idx++ )); do case "${words[$((idx-2))]}" in lookup|update) @@ -255,8 +255,9 @@ _bpftool_map_update_get_name() _bpftool() { - local cur prev words objword json=0 - _init_completion || return + local cur prev words cword comp_args + local json=0 + _init_completion -- "$@" || return # Deal with options if [[ ${words[cword]} == -* ]]; then @@ -293,7 +294,7 @@ _bpftool() esac # Remove all options so completions don't have to deal with them. - local i + local i pprev for (( i=1; i < ${#words[@]}; )); do if [[ ${words[i]::1} == - ]] && [[ ${words[i]} != "-B" ]] && [[ ${words[i]} != "--base-btf" ]]; then @@ -307,7 +308,7 @@ _bpftool() prev=${words[cword - 1]} pprev=${words[cword - 2]} - local object=${words[1]} command=${words[2]} + local object=${words[1]} if [[ -z $object || $cword -eq 1 ]]; then case $cur in @@ -324,8 +325,12 @@ _bpftool() esac fi + local command=${words[2]} [[ $command == help ]] && return 0 + local MAP_TYPE='id pinned name' + local PROG_TYPE='id pinned tag name' + # Completion depends on object and command in use case $object in prog) @@ -346,8 +351,6 @@ _bpftool() ;; esac - local PROG_TYPE='id pinned tag name' - local MAP_TYPE='id pinned name' local METRIC_TYPE='cycles instructions l1d_loads llc_misses \ itlb_misses dtlb_misses' case $command in @@ -457,7 +460,7 @@ _bpftool() obj=${words[3]} if [[ ${words[-4]} == "map" ]]; then - COMPREPLY=( $( compgen -W "id pinned" -- "$cur" ) ) + COMPREPLY=( $( compgen -W "$MAP_TYPE" -- "$cur" ) ) return 0 fi if [[ ${words[-3]} == "map" ]]; then @@ -541,20 +544,9 @@ _bpftool() COMPREPLY=( $( compgen -W "$METRIC_TYPE duration" -- "$cur" ) ) return 0 ;; - 6) - case $prev in - duration) - return 0 - ;; - *) - COMPREPLY=( $( compgen -W "$METRIC_TYPE" -- "$cur" ) ) - return 0 - ;; - esac - return 0 - ;; *) - COMPREPLY=( $( compgen -W "$METRIC_TYPE" -- "$cur" ) ) + [[ $prev == duration ]] && return 0 + _bpftool_once_attr "$METRIC_TYPE" return 0 ;; esac @@ -612,7 +604,7 @@ _bpftool() return 0 ;; register) - _filedir + [[ $prev == $command ]] && _filedir return 0 ;; *) @@ -638,9 +630,12 @@ _bpftool() pinned) _filedir ;; - *) + map) _bpftool_one_of_list $MAP_TYPE ;; + *) + _bpftool_once_attr 'map' + ;; esac return 0 ;; @@ -652,7 +647,6 @@ _bpftool() esac ;; map) - local MAP_TYPE='id pinned name' case $command in show|list|dump|peek|pop|dequeue|freeze) case $prev in @@ -793,13 +787,11 @@ _bpftool() # map, depending on the type of the map to update. case "$(_bpftool_map_guess_map_type)" in array_of_maps|hash_of_maps) - local MAP_TYPE='id pinned name' COMPREPLY+=( $( compgen -W "$MAP_TYPE" \ -- "$cur" ) ) return 0 ;; prog_array) - local PROG_TYPE='id pinned tag name' COMPREPLY+=( $( compgen -W "$PROG_TYPE" \ -- "$cur" ) ) return 0 @@ -821,7 +813,7 @@ _bpftool() esac _bpftool_once_attr 'key' - local UPDATE_FLAGS='any exist noexist' + local UPDATE_FLAGS='any exist noexist' idx for (( idx=3; idx < ${#words[@]}-1; idx++ )); do if [[ ${words[idx]} == 'value' ]]; then # 'value' is present, but is not the last @@ -893,7 +885,6 @@ _bpftool() esac ;; btf) - local PROG_TYPE='id pinned tag name' local MAP_TYPE='id pinned name' case $command in dump) @@ -1033,7 +1024,6 @@ _bpftool() local BPFTOOL_CGROUP_ATTACH_TYPES="$(bpftool feature list_builtins attach_types 2>/dev/null | \ grep '^cgroup_')" local ATTACH_FLAGS='multi override' - local PROG_TYPE='id pinned tag name' # Check for $prev = $command first if [ $prev = $command ]; then _filedir @@ -1086,7 +1076,6 @@ _bpftool() esac ;; net) - local PROG_TYPE='id pinned tag name' local ATTACH_TYPES='xdp xdpgeneric xdpdrv xdpoffload' case $command in show|list) @@ -1193,14 +1182,14 @@ _bpftool() pin|detach) if [[ $prev == "$command" ]]; then COMPREPLY=( $( compgen -W "$LINK_TYPE" -- "$cur" ) ) - else + elif [[ $pprev == "$command" ]]; then _filedir fi return 0 ;; *) [[ $prev == $object ]] && \ - COMPREPLY=( $( compgen -W 'help pin show list' -- "$cur" ) ) + COMPREPLY=( $( compgen -W 'help pin detach show list' -- "$cur" ) ) ;; esac ;; diff --git a/tools/bpf/bpftool/common.c b/tools/bpf/bpftool/common.c index 958e92acca..9b75639434 100644 --- a/tools/bpf/bpftool/common.c +++ b/tools/bpf/bpftool/common.c @@ -410,7 +410,7 @@ void get_prog_full_name(const struct bpf_prog_info *prog_info, int prog_fd, { const char *prog_name = prog_info->name; const struct btf_type *func_type; - const struct bpf_func_info finfo = {}; + struct bpf_func_info finfo = {}; struct bpf_prog_info info = {}; __u32 info_len = sizeof(info); struct btf *prog_btf = NULL; diff --git a/tools/bpf/bpftool/feature.c b/tools/bpf/bpftool/feature.c index 708733b0ea..c754a428c8 100644 --- a/tools/bpf/bpftool/feature.c +++ b/tools/bpf/bpftool/feature.c @@ -664,7 +664,8 @@ probe_helper_ifindex(enum bpf_func_id id, enum bpf_prog_type prog_type, probe_prog_load_ifindex(prog_type, insns, ARRAY_SIZE(insns), buf, sizeof(buf), ifindex); - res = !grep(buf, "invalid func ") && !grep(buf, "unknown func "); + res = !grep(buf, "invalid func ") && !grep(buf, "unknown func ") && + !grep(buf, "program of this type cannot use helper "); switch (get_vendor_id(ifindex)) { case 0x19ee: /* Netronome specific */ diff --git a/tools/bpf/bpftool/gen.c b/tools/bpf/bpftool/gen.c index 540c0f2c4f..b3979ddc01 100644 --- a/tools/bpf/bpftool/gen.c +++ b/tools/bpf/bpftool/gen.c @@ -386,7 +386,7 @@ static int codegen_subskel_datasecs(struct bpf_object *obj, const char *obj_name */ needs_typeof = btf_is_array(var) || btf_is_ptr_to_func_proto(btf, var); if (needs_typeof) - printf("typeof("); + printf("__typeof__("); err = btf_dump__emit_type_decl(d, var_type_id, &opts); if (err) @@ -1131,7 +1131,8 @@ static void gen_st_ops_shadow_init(struct btf *btf, struct bpf_object *obj) continue; codegen("\ \n\ - obj->struct_ops.%1$s = bpf_map__initial_value(obj->maps.%1$s, NULL);\n\ + obj->struct_ops.%1$s = (__typeof__(obj->struct_ops.%1$s))\n\ + bpf_map__initial_value(obj->maps.%1$s, NULL);\n\ \n\ ", ident); } diff --git a/tools/bpf/bpftool/link.c b/tools/bpf/bpftool/link.c index afde9d0c2e..5cd503b763 100644 --- a/tools/bpf/bpftool/link.c +++ b/tools/bpf/bpftool/link.c @@ -526,6 +526,10 @@ static int show_link_close_json(int fd, struct bpf_link_info *info) show_link_ifindex_json(info->netkit.ifindex, json_wtr); show_link_attach_type_json(info->netkit.attach_type, json_wtr); break; + case BPF_LINK_TYPE_SOCKMAP: + jsonw_uint_field(json_wtr, "map_id", info->sockmap.map_id); + show_link_attach_type_json(info->sockmap.attach_type, json_wtr); + break; case BPF_LINK_TYPE_XDP: show_link_ifindex_json(info->xdp.ifindex, json_wtr); break; @@ -915,6 +919,11 @@ static int show_link_close_plain(int fd, struct bpf_link_info *info) show_link_ifindex_plain(info->netkit.ifindex); show_link_attach_type_plain(info->netkit.attach_type); break; + case BPF_LINK_TYPE_SOCKMAP: + printf("\n\t"); + printf("map_id %u ", info->sockmap.map_id); + show_link_attach_type_plain(info->sockmap.attach_type); + break; case BPF_LINK_TYPE_XDP: printf("\n\t"); show_link_ifindex_plain(info->xdp.ifindex); diff --git a/tools/bpf/bpftool/pids.c b/tools/bpf/bpftool/pids.c index 00c77edb63..9b898571b4 100644 --- a/tools/bpf/bpftool/pids.c +++ b/tools/bpf/bpftool/pids.c @@ -101,7 +101,6 @@ int build_obj_refs_table(struct hashmap **map, enum bpf_obj_type type) char buf[4096 / sizeof(*e) * sizeof(*e)]; struct pid_iter_bpf *skel; int err, ret, fd = -1, i; - libbpf_print_fn_t default_print; *map = hashmap__new(hash_fn_for_key_as_id, equal_fn_for_key_as_id, NULL); if (IS_ERR(*map)) { @@ -118,12 +117,18 @@ int build_obj_refs_table(struct hashmap **map, enum bpf_obj_type type) skel->rodata->obj_type = type; - /* we don't want output polluted with libbpf errors if bpf_iter is not - * supported - */ - default_print = libbpf_set_print(libbpf_print_none); - err = pid_iter_bpf__load(skel); - libbpf_set_print(default_print); + if (!verifier_logs) { + libbpf_print_fn_t default_print; + + /* Unless debug information is on, we don't want the output to + * be polluted with libbpf errors if bpf_iter is not supported. + */ + default_print = libbpf_set_print(libbpf_print_none); + err = pid_iter_bpf__load(skel); + libbpf_set_print(default_print); + } else { + err = pid_iter_bpf__load(skel); + } if (err) { /* too bad, kernel doesn't support BPF iterators yet */ err = 0; diff --git a/tools/bpf/bpftool/prog.c b/tools/bpf/bpftool/prog.c index 4c4cf16a40..40ea743d13 100644 --- a/tools/bpf/bpftool/prog.c +++ b/tools/bpf/bpftool/prog.c @@ -1813,6 +1813,10 @@ offload_dev: } if (pinmaps) { + err = create_and_mount_bpffs_dir(pinmaps); + if (err) + goto err_unpin; + err = bpf_object__pin_maps(obj, pinmaps); if (err) { p_err("failed to pin all maps"); @@ -2081,7 +2085,7 @@ static int profile_parse_metrics(int argc, char **argv) NEXT_ARG(); } if (selected_cnt > MAX_NUM_PROFILE_METRICS) { - p_err("too many (%d) metrics, please specify no more than %d metrics at at time", + p_err("too many (%d) metrics, please specify no more than %d metrics at a time", selected_cnt, MAX_NUM_PROFILE_METRICS); return -1; } -- cgit v1.2.3