From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- tools/testing/selftests/firmware/fw_fallback.sh | 283 ++++++++++++++++++++++++ 1 file changed, 283 insertions(+) create mode 100755 tools/testing/selftests/firmware/fw_fallback.sh (limited to 'tools/testing/selftests/firmware/fw_fallback.sh') diff --git a/tools/testing/selftests/firmware/fw_fallback.sh b/tools/testing/selftests/firmware/fw_fallback.sh new file mode 100755 index 0000000000..70d18be46a --- /dev/null +++ b/tools/testing/selftests/firmware/fw_fallback.sh @@ -0,0 +1,283 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# This validates that the kernel will fall back to using the fallback mechanism +# to load firmware it can't find on disk itself. We must request a firmware +# that the kernel won't find, and any installed helper (e.g. udev) also +# won't find so that we can do the load ourself manually. +set -e + +TEST_REQS_FW_SYSFS_FALLBACK="yes" +TEST_REQS_FW_SET_CUSTOM_PATH="no" +TEST_DIR=$(dirname $0) +source $TEST_DIR/fw_lib.sh + +check_mods +check_setup +verify_reqs +setup_tmp_file + +trap "test_finish" EXIT + +load_fw() +{ + local name="$1" + local file="$2" + + # This will block until our load (below) has finished. + echo -n "$name" >"$DIR"/trigger_request & + + # Give kernel a chance to react. + local timeout=10 + while [ ! -e "$DIR"/"$name"/loading ]; do + sleep 0.1 + timeout=$(( $timeout - 1 )) + if [ "$timeout" -eq 0 ]; then + echo "$0: firmware interface never appeared" >&2 + exit 1 + fi + done + + echo 1 >"$DIR"/"$name"/loading + cat "$file" >"$DIR"/"$name"/data + echo 0 >"$DIR"/"$name"/loading + + # Wait for request to finish. + wait +} + +load_fw_cancel() +{ + local name="$1" + local file="$2" + + # This will block until our load (below) has finished. + echo -n "$name" >"$DIR"/trigger_request 2>/dev/null & + + # Give kernel a chance to react. + local timeout=10 + while [ ! -e "$DIR"/"$name"/loading ]; do + sleep 0.1 + timeout=$(( $timeout - 1 )) + if [ "$timeout" -eq 0 ]; then + echo "$0: firmware interface never appeared" >&2 + exit 1 + fi + done + + echo -1 >"$DIR"/"$name"/loading + + # Wait for request to finish. + wait +} + +load_fw_custom() +{ + if [ ! -e "$DIR"/trigger_custom_fallback ]; then + echo "$0: custom fallback trigger not present, ignoring test" >&2 + exit $ksft_skip + fi + + local name="$1" + local file="$2" + + echo -n "$name" >"$DIR"/trigger_custom_fallback 2>/dev/null & + + # Give kernel a chance to react. + local timeout=10 + while [ ! -e "$DIR"/"$name"/loading ]; do + sleep 0.1 + timeout=$(( $timeout - 1 )) + if [ "$timeout" -eq 0 ]; then + echo "$0: firmware interface never appeared" >&2 + exit 1 + fi + done + + echo 1 >"$DIR"/"$name"/loading + cat "$file" >"$DIR"/"$name"/data + echo 0 >"$DIR"/"$name"/loading + + # Wait for request to finish. + wait + return 0 +} + + +load_fw_custom_cancel() +{ + if [ ! -e "$DIR"/trigger_custom_fallback ]; then + echo "$0: canceling custom fallback trigger not present, ignoring test" >&2 + exit $ksft_skip + fi + + local name="$1" + local file="$2" + + echo -n "$name" >"$DIR"/trigger_custom_fallback 2>/dev/null & + + # Give kernel a chance to react. + local timeout=10 + while [ ! -e "$DIR"/"$name"/loading ]; do + sleep 0.1 + timeout=$(( $timeout - 1 )) + if [ "$timeout" -eq 0 ]; then + echo "$0: firmware interface never appeared" >&2 + exit 1 + fi + done + + echo -1 >"$DIR"/"$name"/loading + + # Wait for request to finish. + wait + return 0 +} + +load_fw_fallback_with_child() +{ + local name="$1" + local file="$2" + + # This is the value already set but we want to be explicit + echo 4 >/sys/class/firmware/timeout + + sleep 1 & + SECONDS_BEFORE=$(date +%s) + echo -n "$name" >"$DIR"/trigger_request 2>/dev/null + SECONDS_AFTER=$(date +%s) + SECONDS_DELTA=$(($SECONDS_AFTER - $SECONDS_BEFORE)) + if [ "$SECONDS_DELTA" -lt 4 ]; then + RET=1 + else + RET=0 + fi + wait + return $RET +} + +test_syfs_timeout() +{ + DEVPATH="$DIR"/"nope-$NAME"/loading + + # Test failure when doing nothing (timeout works). + echo -n 2 >/sys/class/firmware/timeout + echo -n "nope-$NAME" >"$DIR"/trigger_request 2>/dev/null & + + # Give the kernel some time to load the loading file, must be less + # than the timeout above. + sleep 1 + if [ ! -f $DEVPATH ]; then + echo "$0: fallback mechanism immediately cancelled" + echo "" + echo "The file never appeared: $DEVPATH" + echo "" + echo "This might be a distribution udev rule setup by your distribution" + echo "to immediately cancel all fallback requests, this must be" + echo "removed before running these tests. To confirm look for" + echo "a firmware rule like /lib/udev/rules.d/50-firmware.rules" + echo "and see if you have something like this:" + echo "" + echo "SUBSYSTEM==\"firmware\", ACTION==\"add\", ATTR{loading}=\"-1\"" + echo "" + echo "If you do remove this file or comment out this line before" + echo "proceeding with these tests." + exit 1 + fi + + if diff -q "$FW" /dev/test_firmware >/dev/null ; then + echo "$0: firmware was not expected to match" >&2 + exit 1 + else + echo "$0: timeout works" + fi +} + +run_sysfs_main_tests() +{ + test_syfs_timeout + # Put timeout high enough for us to do work but not so long that failures + # slow down this test too much. + echo 4 >/sys/class/firmware/timeout + + # Load this script instead of the desired firmware. + load_fw "$NAME" "$0" + if diff -q "$FW" /dev/test_firmware >/dev/null ; then + echo "$0: firmware was not expected to match" >&2 + exit 1 + else + echo "$0: firmware comparison works" + fi + + # Do a proper load, which should work correctly. + load_fw "$NAME" "$FW" + if ! diff -q "$FW" /dev/test_firmware >/dev/null ; then + echo "$0: firmware was not loaded" >&2 + exit 1 + else + echo "$0: fallback mechanism works" + fi + + load_fw_cancel "nope-$NAME" "$FW" + if diff -q "$FW" /dev/test_firmware >/dev/null ; then + echo "$0: firmware was expected to be cancelled" >&2 + exit 1 + else + echo "$0: cancelling fallback mechanism works" + fi + + set +e + load_fw_fallback_with_child "nope-signal-$NAME" "$FW" + if [ "$?" -eq 0 ]; then + echo "$0: SIGCHLD on sync ignored as expected" >&2 + else + echo "$0: error - sync firmware request cancelled due to SIGCHLD" >&2 + exit 1 + fi + set -e +} + +run_sysfs_custom_load_tests() +{ + RANDOM_FILE_PATH=$(setup_random_file) + RANDOM_FILE="$(basename $RANDOM_FILE_PATH)" + if load_fw_custom "$RANDOM_FILE" "$RANDOM_FILE_PATH" ; then + if ! diff -q "$RANDOM_FILE_PATH" /dev/test_firmware >/dev/null ; then + echo "$0: firmware was not loaded" >&2 + exit 1 + else + echo "$0: custom fallback loading mechanism works" + fi + fi + + RANDOM_FILE_PATH=$(setup_random_file) + RANDOM_FILE="$(basename $RANDOM_FILE_PATH)" + if load_fw_custom "$RANDOM_FILE" "$RANDOM_FILE_PATH" ; then + if ! diff -q "$RANDOM_FILE_PATH" /dev/test_firmware >/dev/null ; then + echo "$0: firmware was not loaded" >&2 + exit 1 + else + echo "$0: custom fallback loading mechanism works" + fi + fi + + RANDOM_FILE_REAL="$RANDOM_FILE_PATH" + FAKE_RANDOM_FILE_PATH=$(setup_random_file_fake) + FAKE_RANDOM_FILE="$(basename $FAKE_RANDOM_FILE_PATH)" + + if load_fw_custom_cancel "$FAKE_RANDOM_FILE" "$RANDOM_FILE_REAL" ; then + if diff -q "$RANDOM_FILE_PATH" /dev/test_firmware >/dev/null ; then + echo "$0: firmware was expected to be cancelled" >&2 + exit 1 + else + echo "$0: cancelling custom fallback mechanism works" + fi + fi +} + +if [ "$HAS_FW_LOADER_USER_HELPER_FALLBACK" = "yes" ]; then + run_sysfs_main_tests +fi + +run_sysfs_custom_load_tests + +exit 0 -- cgit v1.2.3