From 7f3a4257159dea8e7ef66d1a539dc6df708b8ed3 Mon Sep 17 00:00:00 2001
From: Daniel Baumann <daniel.baumann@progress-linux.org>
Date: Wed, 7 Aug 2024 15:17:46 +0200
Subject: Adding upstream version 6.10.3.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
---
 tools/testing/selftests/net/Makefile | 60 ++++++------------------------------
 1 file changed, 9 insertions(+), 51 deletions(-)

(limited to 'tools/testing/selftests/net/Makefile')

diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile
index 7b6918d5f4..d9393569d0 100644
--- a/tools/testing/selftests/net/Makefile
+++ b/tools/testing/selftests/net/Makefile
@@ -20,7 +20,6 @@ TEST_PROGS += reuseaddr_ports_exhausted.sh
 TEST_PROGS += txtimestamp.sh
 TEST_PROGS += vrf-xfrm-tests.sh
 TEST_PROGS += rxtimestamp.sh
-TEST_PROGS += devlink_port_split.py
 TEST_PROGS += drop_monitor_tests.sh
 TEST_PROGS += vrf_route_leaking.sh
 TEST_PROGS += bareudp.sh
@@ -35,6 +34,7 @@ TEST_PROGS += gre_gso.sh
 TEST_PROGS += cmsg_so_mark.sh
 TEST_PROGS += cmsg_time.sh cmsg_ipv6.sh
 TEST_PROGS += netns-name.sh
+TEST_PROGS += nl_netdev.py
 TEST_PROGS += srv6_end_dt46_l3vpn_test.sh
 TEST_PROGS += srv6_end_dt4_l3vpn_test.sh
 TEST_PROGS += srv6_end_dt6_l3vpn_test.sh
@@ -43,6 +43,8 @@ TEST_PROGS += srv6_hl2encap_red_l2vpn_test.sh
 TEST_PROGS += srv6_end_next_csid_l3vpn_test.sh
 TEST_PROGS += srv6_end_x_next_csid_l3vpn_test.sh
 TEST_PROGS += srv6_end_flavors_test.sh
+TEST_PROGS += srv6_end_dx4_netfilter_test.sh
+TEST_PROGS += srv6_end_dx6_netfilter_test.sh
 TEST_PROGS += vrf_strict_mode_test.sh
 TEST_PROGS += arp_ndisc_evict_nocarrier.sh
 TEST_PROGS += ndisc_unsolicited_na_test.sh
@@ -67,7 +69,7 @@ TEST_GEN_FILES += ipsec
 TEST_GEN_FILES += ioam6_parser
 TEST_GEN_FILES += gro
 TEST_GEN_PROGS = reuseport_bpf reuseport_bpf_cpu reuseport_bpf_numa
-TEST_GEN_PROGS += reuseport_dualstack reuseaddr_conflict tls tun tap
+TEST_GEN_PROGS += reuseport_dualstack reuseaddr_conflict tls tun tap epoll_busy_poll
 TEST_GEN_FILES += toeplitz
 TEST_GEN_FILES += cmsg_sender
 TEST_GEN_FILES += stress_reuseport_listen
@@ -81,9 +83,6 @@ TEST_PROGS += test_ingress_egress_chaining.sh
 TEST_GEN_PROGS += so_incoming_cpu
 TEST_PROGS += sctp_vrf.sh
 TEST_GEN_FILES += sctp_hello
-TEST_GEN_FILES += csum
-TEST_GEN_FILES += nat6to4.o
-TEST_GEN_FILES += xdp_dummy.o
 TEST_GEN_FILES += ip_local_port_range
 TEST_GEN_FILES += bind_wildcard
 TEST_PROGS += test_vxlan_mdb.sh
@@ -93,63 +92,22 @@ TEST_PROGS += test_bridge_backup_port.sh
 TEST_PROGS += fdb_flush.sh
 TEST_PROGS += fq_band_pktlimit.sh
 TEST_PROGS += vlan_hw_filter.sh
+TEST_PROGS += bpf_offload.py
 
 TEST_FILES := settings
 TEST_FILES += in_netns.sh lib.sh net_helper.sh setup_loopback.sh setup_veth.sh
 
+TEST_GEN_FILES += $(patsubst %.c,%.o,$(wildcard *.bpf.c))
+
 TEST_INCLUDES := forwarding/lib.sh
 
 include ../lib.mk
 
+$(OUTPUT)/epoll_busy_poll: LDLIBS += -lcap
 $(OUTPUT)/reuseport_bpf_numa: LDLIBS += -lnuma
 $(OUTPUT)/tcp_mmap: LDLIBS += -lpthread -lcrypto
 $(OUTPUT)/tcp_inq: LDLIBS += -lpthread
 $(OUTPUT)/bind_bhash: LDLIBS += -lpthread
 $(OUTPUT)/io_uring_zerocopy_tx: CFLAGS += -I../../../include/
 
-# Rules to generate bpf objs
-CLANG ?= clang
-SCRATCH_DIR := $(OUTPUT)/tools
-BUILD_DIR := $(SCRATCH_DIR)/build
-BPFDIR := $(abspath ../../../lib/bpf)
-APIDIR := $(abspath ../../../include/uapi)
-
-CCINCLUDE += -I../bpf
-CCINCLUDE += -I../../../../usr/include/
-CCINCLUDE += -I$(SCRATCH_DIR)/include
-
-BPFOBJ := $(BUILD_DIR)/libbpf/libbpf.a
-
-MAKE_DIRS := $(BUILD_DIR)/libbpf
-$(MAKE_DIRS):
-	mkdir -p $@
-
-# Get Clang's default includes on this system, as opposed to those seen by
-# '--target=bpf'. This fixes "missing" files on some architectures/distros,
-# such as asm/byteorder.h, asm/socket.h, asm/sockios.h, sys/cdefs.h etc.
-#
-# Use '-idirafter': Don't interfere with include mechanics except where the
-# build would have failed anyways.
-define get_sys_includes
-$(shell $(1) $(2) -v -E - </dev/null 2>&1 \
-	| sed -n '/<...> search starts here:/,/End of search list./{ s| \(/.*\)|-idirafter \1|p }') \
-$(shell $(1) $(2) -dM -E - </dev/null | grep '__riscv_xlen ' | awk '{printf("-D__riscv_xlen=%d -D__BITS_PER_LONG=%d", $$3, $$3)}')
-endef
-
-ifneq ($(CROSS_COMPILE),)
-CLANG_TARGET_ARCH = --target=$(notdir $(CROSS_COMPILE:%-=%))
-endif
-
-CLANG_SYS_INCLUDES = $(call get_sys_includes,$(CLANG),$(CLANG_TARGET_ARCH))
-
-$(OUTPUT)/nat6to4.o $(OUTPUT)/xdp_dummy.o: $(OUTPUT)/%.o : %.c $(BPFOBJ) | $(MAKE_DIRS)
-	$(CLANG) -O2 --target=bpf -c $< $(CCINCLUDE) $(CLANG_SYS_INCLUDES) -o $@
-
-$(BPFOBJ): $(wildcard $(BPFDIR)/*.[ch] $(BPFDIR)/Makefile)		       \
-	   $(APIDIR)/linux/bpf.h					       \
-	   | $(BUILD_DIR)/libbpf
-	$(MAKE) $(submake_extras) -C $(BPFDIR) OUTPUT=$(BUILD_DIR)/libbpf/     \
-		    EXTRA_CFLAGS='-g -O0'				       \
-		    DESTDIR=$(SCRATCH_DIR) prefix= all install_headers
-
-EXTRA_CLEAN := $(SCRATCH_DIR)
+include bpf.mk
-- 
cgit v1.2.3