.. _elf_hwcaps_powerpc: ================== POWERPC ELF HWCAPs ================== This document describes the usage and semantics of the powerpc ELF HWCAPs. 1. Introduction --------------- Some hardware or software features are only available on some CPU implementations, and/or with certain kernel configurations, but have no other discovery mechanism available to userspace code. The kernel exposes the presence of these features to userspace through a set of flags called HWCAPs, exposed in the auxiliary vector. Userspace software can test for features by acquiring the AT_HWCAP or AT_HWCAP2 entry of the auxiliary vector, and testing whether the relevant flags are set, e.g.:: bool floating_point_is_present(void) { unsigned long HWCAPs = getauxval(AT_HWCAP); if (HWCAPs & PPC_FEATURE_HAS_FPU) return true; return false; } Where software relies on a feature described by a HWCAP, it should check the relevant HWCAP flag to verify that the feature is present before attempting to make use of the feature. HWCAP is the preferred method to test for the presence of a feature rather than probing through other means, which may not be reliable or may cause unpredictable behaviour. Software that targets a particular platform does not necessarily have to test for required or implied features. For example if the program requires FPU, VMX, VSX, it is not necessary to test those HWCAPs, and it may be impossible to do so if the compiler generates code requiring those features. 2. Facilities ------------- The Power ISA uses the term "facility" to describe a class of instructions, registers, interrupts, etc. The presence or absence of a facility indicates whether this class is available to be used, but the specifics depend on the ISA version. For example, if the VSX facility is available, the VSX instructions that can be used differ between the v3.0B and v3.1B ISA versions. 3. Categories ------------- The Power ISA before v3.0 uses the term "category" to describe certain classes of instructions and operating modes which may be optional or mutually exclusive, the exact meaning of the HWCAP flag may depend on context, e.g., the presence of the BOOKE feature implies that the server category is not implemented. 4. HWCAP allocation ------------------- HWCAPs are allocated as described in Power Architecture 64-Bit ELF V2 ABI Specification (which will be reflected in the kernel's uapi headers). 5. The HWCAPs exposed in AT_HWCAP --------------------------------- PPC_FEATURE_32 32-bit CPU PPC_FEATURE_64 64-bit CPU (userspace may be running in 32-bit mode). PPC_FEATURE_601_INSTR The processor is PowerPC 601. Unused in the kernel since f0ed73f3fa2c ("powerpc: Remove PowerPC 601") PPC_FEATURE_HAS_ALTIVEC Vector (aka Altivec, VMX) facility is available. PPC_FEATURE_HAS_FPU Floating point facility is available. PPC_FEATURE_HAS_MMU Memory management unit is present and enabled. PPC_FEATURE_HAS_4xxMAC The processor is 40x or 44x family. PPC_FEATURE_UNIFIED_CACHE The processor has a unified L1 cache for instructions and data, as found in NXP e200. Unused in the kernel since 39c8bf2b3cc1 ("powerpc: Retire e200 core (mpc555x processor)") PPC_FEATURE_HAS_SPE Signal Processing Engine facility is available. PPC_FEATURE_HAS_EFP_SINGLE Embedded Floating Point single precision operations are available. PPC_FEATURE_HAS_EFP_DOUBLE Embedded Floating Point double precision operations are available. PPC_FEATURE_NO_TB The timebase facility (mftb instruction) is not available. This is a 601 specific HWCAP, so if it is known that the processor running is not a 601, via other HWCAPs or other means, it is not required to test this bit before using the timebase. Unused in the kernel since f0ed73f3fa2c ("powerpc: Remove PowerPC 601") PPC_FEATURE_POWER4 The processor is POWER4 or PPC970/FX/MP. POWER4 support dropped from the kernel since 471d7ff8b51b ("powerpc/64s: Remove POWER4 support") PPC_FEATURE_POWER5 The processor is POWER5. PPC_FEATURE_POWER5_PLUS The processor is POWER5+. PPC_FEATURE_CELL The processor is Cell. PPC_FEATURE_BOOKE The processor implements the embedded category ("BookE") architecture. PPC_FEATURE_SMT The processor implements SMT. PPC_FEATURE_ICACHE_SNOOP The processor icache is coherent with the dcache, and instruction storage can be made consistent with data storage for the purpose of executing instructions with the sequence (as described in, e.g., POWER9 Processor User's Manual, 4.6.2.2 Instruction Cache Block Invalidate (icbi)):: sync icbi (to any address) isync PPC_FEATURE_ARCH_2_05 The processor supports the v2.05 userlevel architecture. Processors supporting later architectures DO NOT set this feature. PPC_FEATURE_PA6T The processor is PA6T. PPC_FEATURE_HAS_DFP DFP facility is available. PPC_FEATURE_POWER6_EXT The processor is POWER6. PPC_FEATURE_ARCH_2_06 The processor supports the v2.06 userlevel architecture. Processors supporting later architectures also set this feature. PPC_FEATURE_HAS_VSX VSX facility is available. PPC_FEATURE_PSERIES_PERFMON_COMPAT The processor supports architected PMU events in the range 0xE0-0xFF. PPC_FEATURE_TRUE_LE The processor supports true little-endian mode. PPC_FEATURE_PPC_LE The processor supports "PowerPC Little-Endian", that uses address munging to make storage access appear to be little-endian, but the data is stored in a different format that is unsuitable to be accessed by other agents not running in this mode. 6. The HWCAPs exposed in AT_HWCAP2 ---------------------------------- PPC_FEATURE2_ARCH_2_07 The processor supports the v2.07 userlevel architecture. Processors supporting later architectures also set this feature. PPC_FEATURE2_HTM Transactional Memory feature is available. PPC_FEATURE2_DSCR DSCR facility is available. PPC_FEATURE2_EBB EBB facility is available. PPC_FEATURE2_ISEL isel instruction is available. This is superseded by ARCH_2_07 and later. PPC_FEATURE2_TAR TAR facility is available. PPC_FEATURE2_VEC_CRYPTO v2.07 crypto instructions are available. PPC_FEATURE2_HTM_NOSC System calls fail if called in a transactional state, see Documentation/arch/powerpc/syscall64-abi.rst PPC_FEATURE2_ARCH_3_00 The processor supports the v3.0B / v3.0C userlevel architecture. Processors supporting later architectures also set this feature. PPC_FEATURE2_HAS_IEEE128 IEEE 128-bit binary floating point is supported with VSX quad-precision instructions and data types. PPC_FEATURE2_DARN darn instruction is available. PPC_FEATURE2_SCV The scv 0 instruction may be used for system calls, see Documentation/arch/powerpc/syscall64-abi.rst. PPC_FEATURE2_HTM_NO_SUSPEND A limited Transactional Memory facility that does not support suspend is available, see Documentation/arch/powerpc/transactional_memory.rst. PPC_FEATURE2_ARCH_3_1 The processor supports the v3.1 userlevel architecture. Processors supporting later architectures also set this feature. PPC_FEATURE2_MMA MMA facility is available.