# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Brcmstb PCIe Host Controller maintainers: - Nicolas Saenz Julienne properties: compatible: items: - enum: - brcm,bcm2711-pcie # The Raspberry Pi 4 - brcm,bcm4908-pcie - brcm,bcm7211-pcie # Broadcom STB version of RPi4 - brcm,bcm7278-pcie # Broadcom 7278 Arm - brcm,bcm7216-pcie # Broadcom 7216 Arm - brcm,bcm7445-pcie # Broadcom 7445 Arm - brcm,bcm7425-pcie # Broadcom 7425 MIPs - brcm,bcm7435-pcie # Broadcom 7435 MIPs reg: maxItems: 1 interrupts: minItems: 1 items: - description: PCIe host controller - description: builtin MSI controller interrupt-names: minItems: 1 items: - const: pcie - const: msi ranges: minItems: 1 maxItems: 4 dma-ranges: minItems: 1 maxItems: 6 clocks: maxItems: 1 clock-names: items: - const: sw_pcie msi-controller: description: Identifies the node as an MSI controller. msi-parent: description: MSI controller the device is capable of using. brcm,enable-ssc: description: Indicates usage of spread-spectrum clocking. type: boolean aspm-no-l0s: true brcm,clkreq-mode: description: A string that determines the operating clkreq mode of the PCIe RC HW with respect to controlling the refclk signal. There are three different modes -- "safe", which drives the refclk signal unconditionally and will work for all devices but does not provide any power savings; "no-l1ss" -- which provides Clock Power Management, L0s, and L1, but cannot provide L1 substate (L1SS) power savings. If the downstream device connected to the RC is L1SS capable AND the OS enables L1SS, all PCIe traffic may abruptly halt, potentially hanging the system; "default" -- which provides L0s, L1, and L1SS, but not compliant to provide Clock Power Management; specifically, may not be able to meet the T_CLRon max timing of 400ns as specified in "Dynamic Clock Control", section 3.2.5.2.2 PCI Express Mini CEM 2.1 specification. This situation is atypical and should happen only with older devices. $ref: /schemas/types.yaml#/definitions/string enum: [ safe, no-l1ss, default ] brcm,scb-sizes: description: u64 giving the 64bit PCIe memory viewport size of a memory controller. There may be up to three controllers, and each size must be a power of two with a size greater or equal to the amount of memory the controller supports. Note that each memory controller may have two component regions -- base and extended -- so this information cannot be deduced from the dma-ranges. $ref: /schemas/types.yaml#/definitions/uint64-array items: minItems: 1 maxItems: 3 required: - compatible - reg - ranges - dma-ranges - "#interrupt-cells" - interrupts - interrupt-names - interrupt-map-mask - interrupt-map - msi-controller allOf: - $ref: /schemas/pci/pci-host-bridge.yaml# - $ref: /schemas/interrupt-controller/msi-controller.yaml# - if: properties: compatible: contains: const: brcm,bcm4908-pcie then: properties: resets: items: - description: reset controller handling the PERST# signal reset-names: items: - const: perst required: - resets - reset-names - if: properties: compatible: contains: const: brcm,bcm7216-pcie then: properties: resets: items: - description: phandle pointing to the RESCAL reset controller reset-names: items: - const: rescal required: - resets - reset-names unevaluatedProperties: false examples: - | #include #include scb { #address-cells = <2>; #size-cells = <1>; pcie0: pcie@7d500000 { compatible = "brcm,bcm2711-pcie"; reg = <0x0 0x7d500000 0x9310>; device_type = "pci"; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; interrupts = , ; interrupt-names = "pcie", "msi"; interrupt-map-mask = <0x0 0x0 0x0 0x7>; interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH 0 0 0 2 &gicv2 GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH 0 0 0 3 &gicv2 GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH 0 0 0 4 &gicv2 GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; msi-parent = <&pcie0>; msi-controller; ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 0x0 0x04000000>; dma-ranges = <0x42000000 0x1 0x00000000 0x0 0x40000000 0x0 0x80000000>, <0x42000000 0x1 0x80000000 0x3 0x00000000 0x0 0x80000000>; brcm,enable-ssc; brcm,scb-sizes = <0x0000000080000000 0x0000000080000000>; /* PCIe bridge, Root Port */ pci@0,0 { #address-cells = <3>; #size-cells = <2>; reg = <0x0 0x0 0x0 0x0 0x0>; compatible = "pciclass,0604"; device_type = "pci"; vpcie3v3-supply = <&vreg7>; ranges; /* PCIe endpoint */ pci-ep@0,0 { assigned-addresses = <0x82010000 0x0 0xf8000000 0x6 0x00000000 0x0 0x2000>; reg = <0x0 0x0 0x0 0x0 0x0>; compatible = "pci14e4,1688"; }; }; }; };