From: Thomas Gleixner Date: Thu, 14 Sep 2023 20:43:23 +0206 Subject: [PATCH 006/134] serial: 8250: Use port lock wrappers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Origin: https://www.kernel.org/pub/linux/kernel/projects/rt/6.6/older/patches-6.6.7-rt18.tar.xz When a serial port is used for kernel console output, then all modifications to the UART registers which are done from other contexts, e.g. getty, termios, are interference points for the kernel console. So far this has been ignored and the printk output is based on the principle of hope. The rework of the console infrastructure which aims to support threaded and atomic consoles, requires to mark sections which modify the UART registers as unsafe. This allows the atomic write function to make informed decisions and eventually to restore operational state. It also allows to prevent the regular UART code from modifying UART registers while printk output is in progress. All modifications of UART registers are guarded by the UART port lock, which provides an obvious synchronization point with the console infrastructure. To avoid adding this functionality to all UART drivers, wrap the spin_[un]lock*() invocations for uart_port::lock into helper functions which just contain the spin_[un]lock*() invocations for now. In a subsequent step these helpers will gain the console synchronization mechanisms. Converted with coccinelle. No functional change. Signed-off-by: Thomas Gleixner Reviewed-by: Ilpo Järvinen Signed-off-by: John Ogness Link: https://lore.kernel.org/r/20230914183831.587273-7-john.ogness@linutronix.de Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sebastian Andrzej Siewior --- drivers/tty/serial/8250/8250_core.c | 12 ++-- drivers/tty/serial/8250/8250_port.c | 100 ++++++++++++++++++------------------ 2 files changed, 56 insertions(+), 56 deletions(-) --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -259,7 +259,7 @@ static void serial8250_backup_timeout(st unsigned int iir, ier = 0, lsr; unsigned long flags; - spin_lock_irqsave(&up->port.lock, flags); + uart_port_lock_irqsave(&up->port, &flags); /* * Must disable interrupts or else we risk racing with the interrupt @@ -292,7 +292,7 @@ static void serial8250_backup_timeout(st if (up->port.irq) serial_out(up, UART_IER, ier); - spin_unlock_irqrestore(&up->port.lock, flags); + uart_port_unlock_irqrestore(&up->port, flags); /* Standard timer interval plus 0.2s to keep the port running */ mod_timer(&up->timer, @@ -992,11 +992,11 @@ static void serial_8250_overrun_backoff_ struct uart_port *port = &up->port; unsigned long flags; - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); up->ier |= UART_IER_RLSI | UART_IER_RDI; up->port.read_status_mask |= UART_LSR_DR; serial_out(up, UART_IER, up->ier); - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); } /** @@ -1194,9 +1194,9 @@ void serial8250_unregister_port(int line if (uart->em485) { unsigned long flags; - spin_lock_irqsave(&uart->port.lock, flags); + uart_port_lock_irqsave(&uart->port, &flags); serial8250_em485_destroy(uart); - spin_unlock_irqrestore(&uart->port.lock, flags); + uart_port_unlock_irqrestore(&uart->port, flags); } uart_remove_one_port(&serial8250_reg, &uart->port); --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -689,7 +689,7 @@ static void serial8250_set_sleep(struct if (p->capabilities & UART_CAP_SLEEP) { /* Synchronize UART_IER access against the console. */ - spin_lock_irq(&p->port.lock); + uart_port_lock_irq(&p->port); if (p->capabilities & UART_CAP_EFR) { lcr = serial_in(p, UART_LCR); efr = serial_in(p, UART_EFR); @@ -703,7 +703,7 @@ static void serial8250_set_sleep(struct serial_out(p, UART_EFR, efr); serial_out(p, UART_LCR, lcr); } - spin_unlock_irq(&p->port.lock); + uart_port_unlock_irq(&p->port); } serial8250_rpm_put(p); @@ -746,9 +746,9 @@ static void enable_rsa(struct uart_8250_ { if (up->port.type == PORT_RSA) { if (up->port.uartclk != SERIAL_RSA_BAUD_BASE * 16) { - spin_lock_irq(&up->port.lock); + uart_port_lock_irq(&up->port); __enable_rsa(up); - spin_unlock_irq(&up->port.lock); + uart_port_unlock_irq(&up->port); } if (up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) serial_out(up, UART_RSA_FRR, 0); @@ -768,7 +768,7 @@ static void disable_rsa(struct uart_8250 if (up->port.type == PORT_RSA && up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) { - spin_lock_irq(&up->port.lock); + uart_port_lock_irq(&up->port); mode = serial_in(up, UART_RSA_MSR); result = !(mode & UART_RSA_MSR_FIFO); @@ -781,7 +781,7 @@ static void disable_rsa(struct uart_8250 if (result) up->port.uartclk = SERIAL_RSA_BAUD_BASE_LO * 16; - spin_unlock_irq(&up->port.lock); + uart_port_unlock_irq(&up->port); } } #endif /* CONFIG_SERIAL_8250_RSA */ @@ -1172,7 +1172,7 @@ static void autoconfig(struct uart_8250_ * * Synchronize UART_IER access against the console. */ - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); up->capabilities = 0; up->bugs = 0; @@ -1211,7 +1211,7 @@ static void autoconfig(struct uart_8250_ /* * We failed; there's nothing here */ - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); DEBUG_AUTOCONF("IER test failed (%02x, %02x) ", scratch2, scratch3); goto out; @@ -1235,7 +1235,7 @@ static void autoconfig(struct uart_8250_ status1 = serial_in(up, UART_MSR) & UART_MSR_STATUS_BITS; serial8250_out_MCR(up, save_mcr); if (status1 != (UART_MSR_DCD | UART_MSR_CTS)) { - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); DEBUG_AUTOCONF("LOOP test failed (%02x) ", status1); goto out; @@ -1304,7 +1304,7 @@ static void autoconfig(struct uart_8250_ serial8250_clear_IER(up); out_unlock: - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); /* * Check if the device is a Fintek F81216A @@ -1344,9 +1344,9 @@ static void autoconfig_irq(struct uart_8 probe_irq_off(probe_irq_on()); save_mcr = serial8250_in_MCR(up); /* Synchronize UART_IER access against the console. */ - spin_lock_irq(&port->lock); + uart_port_lock_irq(port); save_ier = serial_in(up, UART_IER); - spin_unlock_irq(&port->lock); + uart_port_unlock_irq(port); serial8250_out_MCR(up, UART_MCR_OUT1 | UART_MCR_OUT2); irqs = probe_irq_on(); @@ -1359,9 +1359,9 @@ static void autoconfig_irq(struct uart_8 UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2); } /* Synchronize UART_IER access against the console. */ - spin_lock_irq(&port->lock); + uart_port_lock_irq(port); serial_out(up, UART_IER, UART_IER_ALL_INTR); - spin_unlock_irq(&port->lock); + uart_port_unlock_irq(port); serial_in(up, UART_LSR); serial_in(up, UART_RX); serial_in(up, UART_IIR); @@ -1372,9 +1372,9 @@ static void autoconfig_irq(struct uart_8 serial8250_out_MCR(up, save_mcr); /* Synchronize UART_IER access against the console. */ - spin_lock_irq(&port->lock); + uart_port_lock_irq(port); serial_out(up, UART_IER, save_ier); - spin_unlock_irq(&port->lock); + uart_port_unlock_irq(port); if (port->flags & UPF_FOURPORT) outb_p(save_ICP, ICP); @@ -1442,13 +1442,13 @@ static enum hrtimer_restart serial8250_e unsigned long flags; serial8250_rpm_get(p); - spin_lock_irqsave(&p->port.lock, flags); + uart_port_lock_irqsave(&p->port, &flags); if (em485->active_timer == &em485->stop_tx_timer) { p->rs485_stop_tx(p); em485->active_timer = NULL; em485->tx_stopped = true; } - spin_unlock_irqrestore(&p->port.lock, flags); + uart_port_unlock_irqrestore(&p->port, flags); serial8250_rpm_put(p); return HRTIMER_NORESTART; @@ -1630,12 +1630,12 @@ static enum hrtimer_restart serial8250_e struct uart_8250_port *p = em485->port; unsigned long flags; - spin_lock_irqsave(&p->port.lock, flags); + uart_port_lock_irqsave(&p->port, &flags); if (em485->active_timer == &em485->start_tx_timer) { __start_tx(&p->port); em485->active_timer = NULL; } - spin_unlock_irqrestore(&p->port.lock, flags); + uart_port_unlock_irqrestore(&p->port, flags); return HRTIMER_NORESTART; } @@ -1918,7 +1918,7 @@ int serial8250_handle_irq(struct uart_po if (iir & UART_IIR_NO_INT) return 0; - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); status = serial_lsr_in(up); @@ -1988,9 +1988,9 @@ static int serial8250_tx_threshold_handl if ((iir & UART_IIR_ID) == UART_IIR_THRI) { struct uart_8250_port *up = up_to_u8250p(port); - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); serial8250_tx_chars(up); - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); } iir = serial_port_in(port, UART_IIR); @@ -2005,10 +2005,10 @@ static unsigned int serial8250_tx_empty( serial8250_rpm_get(up); - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); if (!serial8250_tx_dma_running(up) && uart_lsr_tx_empty(serial_lsr_in(up))) result = TIOCSER_TEMT; - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); serial8250_rpm_put(up); @@ -2070,13 +2070,13 @@ static void serial8250_break_ctl(struct unsigned long flags; serial8250_rpm_get(up); - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); if (break_state == -1) up->lcr |= UART_LCR_SBC; else up->lcr &= ~UART_LCR_SBC; serial_port_out(port, UART_LCR, up->lcr); - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); serial8250_rpm_put(up); } @@ -2211,7 +2211,7 @@ int serial8250_do_startup(struct uart_po * * Synchronize UART_IER access against the console. */ - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); up->acr = 0; serial_port_out(port, UART_LCR, UART_LCR_CONF_MODE_B); serial_port_out(port, UART_EFR, UART_EFR_ECB); @@ -2221,7 +2221,7 @@ int serial8250_do_startup(struct uart_po serial_port_out(port, UART_LCR, UART_LCR_CONF_MODE_B); serial_port_out(port, UART_EFR, UART_EFR_ECB); serial_port_out(port, UART_LCR, 0); - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); } if (port->type == PORT_DA830) { @@ -2230,10 +2230,10 @@ int serial8250_do_startup(struct uart_po * * Synchronize UART_IER access against the console. */ - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); serial_port_out(port, UART_IER, 0); serial_port_out(port, UART_DA830_PWREMU_MGMT, 0); - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); mdelay(10); /* Enable Tx, Rx and free run mode */ @@ -2347,7 +2347,7 @@ int serial8250_do_startup(struct uart_po * * Synchronize UART_IER access against the console. */ - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); wait_for_xmitr(up, UART_LSR_THRE); serial_port_out_sync(port, UART_IER, UART_IER_THRI); @@ -2359,7 +2359,7 @@ int serial8250_do_startup(struct uart_po iir = serial_port_in(port, UART_IIR); serial_port_out(port, UART_IER, 0); - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); if (port->irqflags & IRQF_SHARED) enable_irq(port->irq); @@ -2382,7 +2382,7 @@ int serial8250_do_startup(struct uart_po */ serial_port_out(port, UART_LCR, UART_LCR_WLEN8); - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); if (up->port.flags & UPF_FOURPORT) { if (!up->port.irq) up->port.mctrl |= TIOCM_OUT1; @@ -2428,7 +2428,7 @@ int serial8250_do_startup(struct uart_po } dont_test_tx_en: - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); /* * Clear the interrupt registers again for luck, and clear the @@ -2499,17 +2499,17 @@ void serial8250_do_shutdown(struct uart_ * * Synchronize UART_IER access against the console. */ - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); up->ier = 0; serial_port_out(port, UART_IER, 0); - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); synchronize_irq(port->irq); if (up->dma) serial8250_release_dma(up); - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); if (port->flags & UPF_FOURPORT) { /* reset interrupts on the AST Fourport board */ inb((port->iobase & 0xfe0) | 0x1f); @@ -2518,7 +2518,7 @@ void serial8250_do_shutdown(struct uart_ port->mctrl &= ~TIOCM_OUT2; serial8250_set_mctrl(port, port->mctrl); - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); /* * Disable break condition and FIFOs @@ -2754,14 +2754,14 @@ void serial8250_update_uartclk(struct ua quot = serial8250_get_divisor(port, baud, &frac); serial8250_rpm_get(up); - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); uart_update_timeout(port, termios->c_cflag, baud); serial8250_set_divisor(port, baud, quot, frac); serial_port_out(port, UART_LCR, up->lcr); - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); serial8250_rpm_put(up); out_unlock: @@ -2798,7 +2798,7 @@ serial8250_do_set_termios(struct uart_po * Synchronize UART_IER access against the console. */ serial8250_rpm_get(up); - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); up->lcr = cval; /* Save computed LCR */ @@ -2901,7 +2901,7 @@ serial8250_do_set_termios(struct uart_po serial_port_out(port, UART_FCR, up->fcr); /* set fcr */ } serial8250_set_mctrl(port, port->mctrl); - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); serial8250_rpm_put(up); /* Don't rewrite B0 */ @@ -2924,15 +2924,15 @@ void serial8250_do_set_ldisc(struct uart { if (termios->c_line == N_PPS) { port->flags |= UPF_HARDPPS_CD; - spin_lock_irq(&port->lock); + uart_port_lock_irq(port); serial8250_enable_ms(port); - spin_unlock_irq(&port->lock); + uart_port_unlock_irq(port); } else { port->flags &= ~UPF_HARDPPS_CD; if (!UART_ENABLE_MS(port, termios->c_cflag)) { - spin_lock_irq(&port->lock); + uart_port_lock_irq(port); serial8250_disable_ms(port); - spin_unlock_irq(&port->lock); + uart_port_unlock_irq(port); } } } @@ -3406,9 +3406,9 @@ void serial8250_console_write(struct uar touch_nmi_watchdog(); if (oops_in_progress) - locked = spin_trylock_irqsave(&port->lock, flags); + locked = uart_port_trylock_irqsave(port, &flags); else - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); /* * First save the IER then disable the interrupts @@ -3478,7 +3478,7 @@ void serial8250_console_write(struct uar serial8250_modem_status(up); if (locked) - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); } static unsigned int probe_baud(struct uart_port *port)