From: Thomas Gleixner Date: Thu, 14 Sep 2023 20:43:41 +0206 Subject: [PATCH 024/134] serial: digicolor: Use port lock wrappers Origin: https://www.kernel.org/pub/linux/kernel/projects/rt/6.6/older/patches-6.6.7-rt18.tar.xz When a serial port is used for kernel console output, then all modifications to the UART registers which are done from other contexts, e.g. getty, termios, are interference points for the kernel console. So far this has been ignored and the printk output is based on the principle of hope. The rework of the console infrastructure which aims to support threaded and atomic consoles, requires to mark sections which modify the UART registers as unsafe. This allows the atomic write function to make informed decisions and eventually to restore operational state. It also allows to prevent the regular UART code from modifying UART registers while printk output is in progress. All modifications of UART registers are guarded by the UART port lock, which provides an obvious synchronization point with the console infrastructure. To avoid adding this functionality to all UART drivers, wrap the spin_[un]lock*() invocations for uart_port::lock into helper functions which just contain the spin_[un]lock*() invocations for now. In a subsequent step these helpers will gain the console synchronization mechanisms. Converted with coccinelle. No functional change. Signed-off-by: Thomas Gleixner Acked-by: Baruch Siach Signed-off-by: John Ogness Link: https://lore.kernel.org/r/20230914183831.587273-25-john.ogness@linutronix.de Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sebastian Andrzej Siewior --- drivers/tty/serial/digicolor-usart.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) --- a/drivers/tty/serial/digicolor-usart.c +++ b/drivers/tty/serial/digicolor-usart.c @@ -133,7 +133,7 @@ static void digicolor_uart_rx(struct uar { unsigned long flags; - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); while (1) { u8 status, ch, ch_flag; @@ -172,7 +172,7 @@ static void digicolor_uart_rx(struct uar ch_flag); } - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); tty_flip_buffer_push(&port->state->port); } @@ -185,7 +185,7 @@ static void digicolor_uart_tx(struct uar if (digicolor_uart_tx_full(port)) return; - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); if (port->x_char) { writeb_relaxed(port->x_char, port->membase + UA_EMI_REC); @@ -211,7 +211,7 @@ static void digicolor_uart_tx(struct uar uart_write_wakeup(port); out: - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); } static irqreturn_t digicolor_uart_int(int irq, void *dev_id) @@ -333,7 +333,7 @@ static void digicolor_uart_set_termios(s port->ignore_status_mask |= UA_STATUS_OVERRUN_ERR | UA_STATUS_PARITY_ERR | UA_STATUS_FRAME_ERR; - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); uart_update_timeout(port, termios->c_cflag, baud); @@ -341,7 +341,7 @@ static void digicolor_uart_set_termios(s writeb_relaxed(divisor & 0xff, port->membase + UA_HBAUD_LO); writeb_relaxed(divisor >> 8, port->membase + UA_HBAUD_HI); - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); } static const char *digicolor_uart_type(struct uart_port *port) @@ -398,14 +398,14 @@ static void digicolor_uart_console_write int locked = 1; if (oops_in_progress) - locked = spin_trylock_irqsave(&port->lock, flags); + locked = uart_port_trylock_irqsave(port, &flags); else - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); uart_console_write(port, c, n, digicolor_uart_console_putchar); if (locked) - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); /* Wait for transmitter to become empty */ do {