From: Thomas Gleixner Date: Thu, 14 Sep 2023 20:44:14 +0206 Subject: [PATCH 057/134] serial: core: Use port lock wrappers Origin: https://www.kernel.org/pub/linux/kernel/projects/rt/6.6/older/patches-6.6.7-rt18.tar.xz When a serial port is used for kernel console output, then all modifications to the UART registers which are done from other contexts, e.g. getty, termios, are interference points for the kernel console. So far this has been ignored and the printk output is based on the principle of hope. The rework of the console infrastructure which aims to support threaded and atomic consoles, requires to mark sections which modify the UART registers as unsafe. This allows the atomic write function to make informed decisions and eventually to restore operational state. It also allows to prevent the regular UART code from modifying UART registers while printk output is in progress. All modifications of UART registers are guarded by the UART port lock, which provides an obvious synchronization point with the console infrastructure. To avoid adding this functionality to all UART drivers, wrap the spin_[un]lock*() invocations for uart_port::lock into helper functions which just contain the spin_[un]lock*() invocations for now. In a subsequent step these helpers will gain the console synchronization mechanisms. Converted with coccinelle. No functional change. Signed-off-by: Thomas Gleixner Signed-off-by: John Ogness Link: https://lore.kernel.org/r/20230914183831.587273-58-john.ogness@linutronix.de Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sebastian Andrzej Siewior --- drivers/tty/serial/serial_core.c | 92 +++++++++++++++++++-------------------- drivers/tty/serial/serial_port.c | 4 - 2 files changed, 48 insertions(+), 48 deletions(-) --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -79,7 +79,7 @@ ({ \ struct uart_port *__uport = uart_port_ref(state); \ if (__uport) \ - spin_lock_irqsave(&__uport->lock, flags); \ + uart_port_lock_irqsave(__uport, &flags); \ __uport; \ }) @@ -87,7 +87,7 @@ ({ \ struct uart_port *__uport = uport; \ if (__uport) { \ - spin_unlock_irqrestore(&__uport->lock, flags); \ + uart_port_unlock_irqrestore(__uport, flags); \ uart_port_deref(__uport); \ } \ }) @@ -179,12 +179,12 @@ unsigned long flags; unsigned int old; - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); old = port->mctrl; port->mctrl = (old & ~clear) | set; if (old != port->mctrl && !(port->rs485.flags & SER_RS485_ENABLED)) port->ops->set_mctrl(port, port->mctrl); - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); } #define uart_set_mctrl(port, set) uart_update_mctrl(port, set, 0) @@ -219,7 +219,7 @@ /* * Set modem status enables based on termios cflag */ - spin_lock_irq(&uport->lock); + uart_port_lock_irq(uport); if (termios->c_cflag & CRTSCTS) uport->status |= UPSTAT_CTS_ENABLE; else @@ -240,7 +240,7 @@ else __uart_start(state); } - spin_unlock_irq(&uport->lock); + uart_port_unlock_irq(uport); } /* @@ -702,11 +702,11 @@ if (port->ops->send_xchar) port->ops->send_xchar(port, ch); else { - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); port->x_char = ch; if (ch) port->ops->start_tx(port); - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); } uart_port_deref(port); } @@ -1085,9 +1085,9 @@ if (!tty_io_error(tty)) { result = uport->mctrl; - spin_lock_irq(&uport->lock); + uart_port_lock_irq(uport); result |= uport->ops->get_mctrl(uport); - spin_unlock_irq(&uport->lock); + uart_port_unlock_irq(uport); } out: mutex_unlock(&port->mutex); @@ -1223,16 +1223,16 @@ uport = uart_port_ref(state); if (!uport) return -EIO; - spin_lock_irq(&uport->lock); + uart_port_lock_irq(uport); memcpy(&cprev, &uport->icount, sizeof(struct uart_icount)); uart_enable_ms(uport); - spin_unlock_irq(&uport->lock); + uart_port_unlock_irq(uport); add_wait_queue(&port->delta_msr_wait, &wait); for (;;) { - spin_lock_irq(&uport->lock); + uart_port_lock_irq(uport); memcpy(&cnow, &uport->icount, sizeof(struct uart_icount)); - spin_unlock_irq(&uport->lock); + uart_port_unlock_irq(uport); set_current_state(TASK_INTERRUPTIBLE); @@ -1277,9 +1277,9 @@ uport = uart_port_ref(state); if (!uport) return -EIO; - spin_lock_irq(&uport->lock); + uart_port_lock_irq(uport); memcpy(&cnow, &uport->icount, sizeof(struct uart_icount)); - spin_unlock_irq(&uport->lock); + uart_port_unlock_irq(uport); uart_port_deref(uport); icount->cts = cnow.cts; @@ -1432,9 +1432,9 @@ uart_set_rs485_termination(port, rs485); uart_set_rs485_rx_during_tx(port, rs485); - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); ret = port->rs485_config(port, NULL, rs485); - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); if (ret) { memset(rs485, 0, sizeof(*rs485)); /* unset GPIOs */ @@ -1451,9 +1451,9 @@ unsigned long flags; struct serial_rs485 aux; - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); aux = port->rs485; - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); if (copy_to_user(rs485, &aux, sizeof(aux))) return -EFAULT; @@ -1481,7 +1481,7 @@ uart_set_rs485_termination(port, &rs485); uart_set_rs485_rx_during_tx(port, &rs485); - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); ret = port->rs485_config(port, &tty->termios, &rs485); if (!ret) { port->rs485 = rs485; @@ -1490,7 +1490,7 @@ if (!(rs485.flags & SER_RS485_ENABLED)) port->ops->set_mctrl(port, port->mctrl); } - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); if (ret) { /* restore old GPIO settings */ gpiod_set_value_cansleep(port->rs485_term_gpio, @@ -1515,9 +1515,9 @@ if (!port->iso7816_config) return -ENOTTY; - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); aux = port->iso7816; - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); if (copy_to_user(iso7816, &aux, sizeof(aux))) return -EFAULT; @@ -1546,9 +1546,9 @@ if (iso7816.reserved[i]) return -EINVAL; - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); ret = port->iso7816_config(port, &iso7816); - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); if (ret) return ret; @@ -1765,9 +1765,9 @@ if (WARN(!uport, "detached port still initialized!\n")) return; - spin_lock_irq(&uport->lock); + uart_port_lock_irq(uport); uport->ops->stop_rx(uport); - spin_unlock_irq(&uport->lock); + uart_port_unlock_irq(uport); uart_port_shutdown(port); @@ -1781,10 +1781,10 @@ /* * Free the transmit buffer. */ - spin_lock_irq(&uport->lock); + uart_port_lock_irq(uport); buf = state->xmit.buf; state->xmit.buf = NULL; - spin_unlock_irq(&uport->lock); + uart_port_unlock_irq(uport); free_page((unsigned long)buf); @@ -1927,10 +1927,10 @@ */ if (WARN_ON(!uport)) return true; - spin_lock_irq(&uport->lock); + uart_port_lock_irq(uport); uart_enable_ms(uport); mctrl = uport->ops->get_mctrl(uport); - spin_unlock_irq(&uport->lock); + uart_port_unlock_irq(uport); uart_port_deref(uport); return mctrl & TIOCM_CAR; @@ -2047,9 +2047,9 @@ pm_state = state->pm_state; if (pm_state != UART_PM_STATE_ON) uart_change_pm(state, UART_PM_STATE_ON); - spin_lock_irq(&uport->lock); + uart_port_lock_irq(uport); status = uport->ops->get_mctrl(uport); - spin_unlock_irq(&uport->lock); + uart_port_unlock_irq(uport); if (pm_state != UART_PM_STATE_ON) uart_change_pm(state, pm_state); @@ -2388,9 +2388,9 @@ */ if (!console_suspend_enabled && uart_console(uport)) { if (uport->ops->start_rx) { - spin_lock_irq(&uport->lock); + uart_port_lock_irq(uport); uport->ops->stop_rx(uport); - spin_unlock_irq(&uport->lock); + uart_port_unlock_irq(uport); } goto unlock; } @@ -2405,7 +2405,7 @@ tty_port_set_suspended(port, true); tty_port_set_initialized(port, false); - spin_lock_irq(&uport->lock); + uart_port_lock_irq(uport); ops->stop_tx(uport); if (!(uport->rs485.flags & SER_RS485_ENABLED)) ops->set_mctrl(uport, 0); @@ -2413,7 +2413,7 @@ mctrl = uport->mctrl; uport->mctrl = 0; ops->stop_rx(uport); - spin_unlock_irq(&uport->lock); + uart_port_unlock_irq(uport); /* * Wait for the transmitter to empty. @@ -2485,9 +2485,9 @@ uart_change_pm(state, UART_PM_STATE_ON); uport->ops->set_termios(uport, &termios, NULL); if (!console_suspend_enabled && uport->ops->start_rx) { - spin_lock_irq(&uport->lock); + uart_port_lock_irq(uport); uport->ops->start_rx(uport); - spin_unlock_irq(&uport->lock); + uart_port_unlock_irq(uport); } if (console_suspend_enabled) console_start(uport->cons); @@ -2498,10 +2498,10 @@ int ret; uart_change_pm(state, UART_PM_STATE_ON); - spin_lock_irq(&uport->lock); + uart_port_lock_irq(uport); if (!(uport->rs485.flags & SER_RS485_ENABLED)) ops->set_mctrl(uport, 0); - spin_unlock_irq(&uport->lock); + uart_port_unlock_irq(uport); if (console_suspend_enabled || !uart_console(uport)) { /* Protected by port mutex for now */ struct tty_struct *tty = port->tty; @@ -2511,11 +2511,11 @@ if (tty) uart_change_line_settings(tty, state, NULL); uart_rs485_config(uport); - spin_lock_irq(&uport->lock); + uart_port_lock_irq(uport); if (!(uport->rs485.flags & SER_RS485_ENABLED)) ops->set_mctrl(uport, uport->mctrl); ops->start_tx(uport); - spin_unlock_irq(&uport->lock); + uart_port_unlock_irq(uport); tty_port_set_initialized(port, true); } else { /* @@ -2618,11 +2618,11 @@ * keep the DTR setting that is set in uart_set_options() * We probably don't need a spinlock around this, but */ - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); port->mctrl &= TIOCM_DTR; if (!(port->rs485.flags & SER_RS485_ENABLED)) port->ops->set_mctrl(port, port->mctrl); - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); uart_rs485_config(port); --- a/drivers/tty/serial/serial_port.c +++ b/drivers/tty/serial/serial_port.c @@ -35,10 +35,10 @@ goto out; /* Flush any pending TX for the port */ - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); if (__serial_port_busy(port)) port->ops->start_tx(port); - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); out: pm_runtime_mark_last_busy(dev);