From: Thomas Gleixner Date: Thu, 14 Sep 2023 20:44:26 +0206 Subject: [PATCH 069/134] serial: sunzilog: Use port lock wrappers Origin: https://www.kernel.org/pub/linux/kernel/projects/rt/6.6/older/patches-6.6.7-rt18.tar.xz When a serial port is used for kernel console output, then all modifications to the UART registers which are done from other contexts, e.g. getty, termios, are interference points for the kernel console. So far this has been ignored and the printk output is based on the principle of hope. The rework of the console infrastructure which aims to support threaded and atomic consoles, requires to mark sections which modify the UART registers as unsafe. This allows the atomic write function to make informed decisions and eventually to restore operational state. It also allows to prevent the regular UART code from modifying UART registers while printk output is in progress. All modifications of UART registers are guarded by the UART port lock, which provides an obvious synchronization point with the console infrastructure. To avoid adding this functionality to all UART drivers, wrap the spin_[un]lock*() invocations for uart_port::lock into helper functions which just contain the spin_[un]lock*() invocations for now. In a subsequent step these helpers will gain the console synchronization mechanisms. Converted with coccinelle. No functional change. Signed-off-by: Thomas Gleixner Signed-off-by: John Ogness Link: https://lore.kernel.org/r/20230914183831.587273-70-john.ogness@linutronix.de Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sebastian Andrzej Siewior --- drivers/tty/serial/sunzilog.c | 42 +++++++++++++++++++++--------------------- 1 file changed, 21 insertions(+), 21 deletions(-) --- a/drivers/tty/serial/sunzilog.c +++ b/drivers/tty/serial/sunzilog.c @@ -531,7 +531,7 @@ static irqreturn_t sunzilog_interrupt(in struct tty_port *port; unsigned char r3; - spin_lock(&up->port.lock); + uart_port_lock(&up->port); r3 = read_zsreg(channel, R3); /* Channel A */ @@ -548,7 +548,7 @@ static irqreturn_t sunzilog_interrupt(in if (r3 & CHATxIP) sunzilog_transmit_chars(up, channel); } - spin_unlock(&up->port.lock); + uart_port_unlock(&up->port); if (port) tty_flip_buffer_push(port); @@ -557,7 +557,7 @@ static irqreturn_t sunzilog_interrupt(in up = up->next; channel = ZILOG_CHANNEL_FROM_PORT(&up->port); - spin_lock(&up->port.lock); + uart_port_lock(&up->port); port = NULL; if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) { writeb(RES_H_IUS, &channel->control); @@ -571,7 +571,7 @@ static irqreturn_t sunzilog_interrupt(in if (r3 & CHBTxIP) sunzilog_transmit_chars(up, channel); } - spin_unlock(&up->port.lock); + uart_port_unlock(&up->port); if (port) tty_flip_buffer_push(port); @@ -604,11 +604,11 @@ static unsigned int sunzilog_tx_empty(st unsigned char status; unsigned int ret; - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); status = sunzilog_read_channel_status(port); - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); if (status & Tx_BUF_EMP) ret = TIOCSER_TEMT; @@ -764,7 +764,7 @@ static void sunzilog_break_ctl(struct ua else clear_bits |= SND_BRK; - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); new_reg = (up->curregs[R5] | set_bits) & ~clear_bits; if (new_reg != up->curregs[R5]) { @@ -774,7 +774,7 @@ static void sunzilog_break_ctl(struct ua write_zsreg(channel, R5, up->curregs[R5]); } - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); } static void __sunzilog_startup(struct uart_sunzilog_port *up) @@ -800,9 +800,9 @@ static int sunzilog_startup(struct uart_ if (ZS_IS_CONS(up)) return 0; - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); __sunzilog_startup(up); - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); return 0; } @@ -840,7 +840,7 @@ static void sunzilog_shutdown(struct uar if (ZS_IS_CONS(up)) return; - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); channel = ZILOG_CHANNEL_FROM_PORT(port); @@ -853,7 +853,7 @@ static void sunzilog_shutdown(struct uar up->curregs[R5] &= ~SND_BRK; sunzilog_maybe_update_regs(up, channel); - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); } /* Shared by TTY driver and serial console setup. The port lock is held @@ -945,7 +945,7 @@ sunzilog_set_termios(struct uart_port *p baud = uart_get_baud_rate(port, termios, old, 1200, 76800); - spin_lock_irqsave(&up->port.lock, flags); + uart_port_lock_irqsave(&up->port, &flags); brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR); @@ -962,7 +962,7 @@ sunzilog_set_termios(struct uart_port *p uart_update_timeout(port, termios->c_cflag, baud); - spin_unlock_irqrestore(&up->port.lock, flags); + uart_port_unlock_irqrestore(&up->port, flags); } static const char *sunzilog_type(struct uart_port *port) @@ -1201,15 +1201,15 @@ sunzilog_console_write(struct console *c int locked = 1; if (up->port.sysrq || oops_in_progress) - locked = spin_trylock_irqsave(&up->port.lock, flags); + locked = uart_port_trylock_irqsave(&up->port, &flags); else - spin_lock_irqsave(&up->port.lock, flags); + uart_port_lock_irqsave(&up->port, &flags); uart_console_write(&up->port, s, count, sunzilog_putchar); udelay(2); if (locked) - spin_unlock_irqrestore(&up->port.lock, flags); + uart_port_unlock_irqrestore(&up->port, flags); } static int __init sunzilog_console_setup(struct console *con, char *options) @@ -1244,7 +1244,7 @@ static int __init sunzilog_console_setup brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR); - spin_lock_irqsave(&up->port.lock, flags); + uart_port_lock_irqsave(&up->port, &flags); up->curregs[R15] |= BRKIE; sunzilog_convert_to_zs(up, con->cflag, 0, brg); @@ -1252,7 +1252,7 @@ static int __init sunzilog_console_setup sunzilog_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS); __sunzilog_startup(up); - spin_unlock_irqrestore(&up->port.lock, flags); + uart_port_unlock_irqrestore(&up->port, flags); return 0; } @@ -1333,7 +1333,7 @@ static void sunzilog_init_hw(struct uart channel = ZILOG_CHANNEL_FROM_PORT(&up->port); - spin_lock_irqsave(&up->port.lock, flags); + uart_port_lock_irqsave(&up->port, &flags); if (ZS_IS_CHANNEL_A(up)) { write_zsreg(channel, R9, FHWRES); ZSDELAY_LONG(); @@ -1383,7 +1383,7 @@ static void sunzilog_init_hw(struct uart write_zsreg(channel, R9, up->curregs[R9]); } - spin_unlock_irqrestore(&up->port.lock, flags); + uart_port_unlock_irqrestore(&up->port, flags); #ifdef CONFIG_SERIO if (up->flags & (SUNZILOG_FLAG_CONS_KEYB |