// SPDX-License-Identifier: GPL-2.0 /* * Workingset detection * * Copyright (C) 2013 Red Hat, Inc., Johannes Weiner */ #include #include #include #include #include #include #include #include #include #include #include #include "internal.h" /* * Double CLOCK lists * * Per node, two clock lists are maintained for file pages: the * inactive and the active list. Freshly faulted pages start out at * the head of the inactive list and page reclaim scans pages from the * tail. Pages that are accessed multiple times on the inactive list * are promoted to the active list, to protect them from reclaim, * whereas active pages are demoted to the inactive list when the * active list grows too big. * * fault ------------------------+ * | * +--------------+ | +-------------+ * reclaim <- | inactive | <-+-- demotion | active | <--+ * +--------------+ +-------------+ | * | | * +-------------- promotion ------------------+ * * * Access frequency and refault distance * * A workload is thrashing when its pages are frequently used but they * are evicted from the inactive list every time before another access * would have promoted them to the active list. * * In cases where the average access distance between thrashing pages * is bigger than the size of memory there is nothing that can be * done - the thrashing set could never fit into memory under any * circumstance. * * However, the average access distance could be bigger than the * inactive list, yet smaller than the size of memory. In this case, * the set could fit into memory if it weren't for the currently * active pages - which may be used more, hopefully less frequently: * * +-memory available to cache-+ * | | * +-inactive------+-active----+ * a b | c d e f g h i | J K L M N | * +---------------+-----------+ * * It is prohibitively expensive to accurately track access frequency * of pages. But a reasonable approximation can be made to measure * thrashing on the inactive list, after which refaulting pages can be * activated optimistically to compete with the existing active pages. * * Approximating inactive page access frequency - Observations: * * 1. When a page is accessed for the first time, it is added to the * head of the inactive list, slides every existing inactive page * towards the tail by one slot, and pushes the current tail page * out of memory. * * 2. When a page is accessed for the second time, it is promoted to * the active list, shrinking the inactive list by one slot. This * also slides all inactive pages that were faulted into the cache * more recently than the activated page towards the tail of the * inactive list. * * Thus: * * 1. The sum of evictions and activations between any two points in * time indicate the minimum number of inactive pages accessed in * between. * * 2. Moving one inactive page N page slots towards the tail of the * list requires at least N inactive page accesses. * * Combining these: * * 1. When a page is finally evicted from memory, the number of * inactive pages accessed while the page was in cache is at least * the number of page slots on the inactive list. * * 2. In addition, measuring the sum of evictions and activations (E) * at the time of a page's eviction, and comparing it to another * reading (R) at the time the page faults back into memory tells * the minimum number of accesses while the page was not cached. * This is called the refault distance. * * Because the first access of the page was the fault and the second * access the refault, we combine the in-cache distance with the * out-of-cache distance to get the complete minimum access distance * of this page: * * NR_inactive + (R - E) * * And knowing the minimum access distance of a page, we can easily * tell if the page would be able to stay in cache assuming all page * slots in the cache were available: * * NR_inactive + (R - E) <= NR_inactive + NR_active * * If we have swap we should consider about NR_inactive_anon and * NR_active_anon, so for page cache and anonymous respectively: * * NR_inactive_file + (R - E) <= NR_inactive_file + NR_active_file * + NR_inactive_anon + NR_active_anon * * NR_inactive_anon + (R - E) <= NR_inactive_anon + NR_active_anon * + NR_inactive_file + NR_active_file * * Which can be further simplified to: * * (R - E) <= NR_active_file + NR_inactive_anon + NR_active_anon * * (R - E) <= NR_active_anon + NR_inactive_file + NR_active_file * * Put into words, the refault distance (out-of-cache) can be seen as * a deficit in inactive list space (in-cache). If the inactive list * had (R - E) more page slots, the page would not have been evicted * in between accesses, but activated instead. And on a full system, * the only thing eating into inactive list space is active pages. * * * Refaulting inactive pages * * All that is known about the active list is that the pages have been * accessed more than once in the past. This means that at any given * time there is actually a good chance that pages on the active list * are no longer in active use. * * So when a refault distance of (R - E) is observed and there are at * least (R - E) pages in the userspace workingset, the refaulting page * is activated optimistically in the hope that (R - E) pages are actually * used less frequently than the refaulting page - or even not used at * all anymore. * * That means if inactive cache is refaulting with a suitable refault * distance, we assume the cache workingset is transitioning and put * pressure on the current workingset. * * If this is wrong and demotion kicks in, the pages which are truly * used more frequently will be reactivated while the less frequently * used once will be evicted from memory. * * But if this is right, the stale pages will be pushed out of memory * and the used pages get to stay in cache. * * Refaulting active pages * * If on the other hand the refaulting pages have recently been * deactivated, it means that the active list is no longer protecting * actively used cache from reclaim. The cache is NOT transitioning to * a different workingset; the existing workingset is thrashing in the * space allocated to the page cache. * * * Implementation * * For each node's LRU lists, a counter for inactive evictions and * activations is maintained (node->nonresident_age). * * On eviction, a snapshot of this counter (along with some bits to * identify the node) is stored in the now empty page cache * slot of the evicted page. This is called a shadow entry. * * On cache misses for which there are shadow entries, an eligible * refault distance will immediately activate the refaulting page. */ #define WORKINGSET_SHIFT 1 #define EVICTION_SHIFT ((BITS_PER_LONG - BITS_PER_XA_VALUE) + \ WORKINGSET_SHIFT + NODES_SHIFT + \ MEM_CGROUP_ID_SHIFT) #define EVICTION_MASK (~0UL >> EVICTION_SHIFT) /* * Eviction timestamps need to be able to cover the full range of * actionable refaults. However, bits are tight in the xarray * entry, and after storing the identifier for the lruvec there might * not be enough left to represent every single actionable refault. In * that case, we have to sacrifice granularity for distance, and group * evictions into coarser buckets by shaving off lower timestamp bits. */ static unsigned int bucket_order __read_mostly; static void *pack_shadow(int memcgid, pg_data_t *pgdat, unsigned long eviction, bool workingset) { eviction &= EVICTION_MASK; eviction = (eviction << MEM_CGROUP_ID_SHIFT) | memcgid; eviction = (eviction << NODES_SHIFT) | pgdat->node_id; eviction = (eviction << WORKINGSET_SHIFT) | workingset; return xa_mk_value(eviction); } static void unpack_shadow(void *shadow, int *memcgidp, pg_data_t **pgdat, unsigned long *evictionp, bool *workingsetp) { unsigned long entry = xa_to_value(shadow); int memcgid, nid; bool workingset; workingset = entry & ((1UL << WORKINGSET_SHIFT) - 1); entry >>= WORKINGSET_SHIFT; nid = entry & ((1UL << NODES_SHIFT) - 1); entry >>= NODES_SHIFT; memcgid = entry & ((1UL << MEM_CGROUP_ID_SHIFT) - 1); entry >>= MEM_CGROUP_ID_SHIFT; *memcgidp = memcgid; *pgdat = NODE_DATA(nid); *evictionp = entry; *workingsetp = workingset; } #ifdef CONFIG_LRU_GEN static void *lru_gen_eviction(struct folio *folio) { int hist; unsigned long token; unsigned long min_seq; struct lruvec *lruvec; struct lru_gen_folio *lrugen; int type = folio_is_file_lru(folio); int delta = folio_nr_pages(folio); int refs = folio_lru_refs(folio); int tier = lru_tier_from_refs(refs); struct mem_cgroup *memcg = folio_memcg(folio); struct pglist_data *pgdat = folio_pgdat(folio); BUILD_BUG_ON(LRU_GEN_WIDTH + LRU_REFS_WIDTH > BITS_PER_LONG - EVICTION_SHIFT); lruvec = mem_cgroup_lruvec(memcg, pgdat); lrugen = &lruvec->lrugen; min_seq = READ_ONCE(lrugen->min_seq[type]); token = (min_seq << LRU_REFS_WIDTH) | max(refs - 1, 0); hist = lru_hist_from_seq(min_seq); atomic_long_add(delta, &lrugen->evicted[hist][type][tier]); return pack_shadow(mem_cgroup_id(memcg), pgdat, token, refs); } /* * Tests if the shadow entry is for a folio that was recently evicted. * Fills in @lruvec, @token, @workingset with the values unpacked from shadow. */ static bool lru_gen_test_recent(void *shadow, bool file, struct lruvec **lruvec, unsigned long *token, bool *workingset) { int memcg_id; unsigned long min_seq; struct mem_cgroup *memcg; struct pglist_data *pgdat; unpack_shadow(shadow, &memcg_id, &pgdat, token, workingset); memcg = mem_cgroup_from_id(memcg_id); *lruvec = mem_cgroup_lruvec(memcg, pgdat); min_seq = READ_ONCE((*lruvec)->lrugen.min_seq[file]); return (*token >> LRU_REFS_WIDTH) == (min_seq & (EVICTION_MASK >> LRU_REFS_WIDTH)); } static void lru_gen_refault(struct folio *folio, void *shadow) { bool recent; int hist, tier, refs; bool workingset; unsigned long token; struct lruvec *lruvec; struct lru_gen_folio *lrugen; int type = folio_is_file_lru(folio); int delta = folio_nr_pages(folio); rcu_read_lock(); recent = lru_gen_test_recent(shadow, type, &lruvec, &token, &workingset); if (lruvec != folio_lruvec(folio)) goto unlock; mod_lruvec_state(lruvec, WORKINGSET_REFAULT_BASE + type, delta); if (!recent) goto unlock; lrugen = &lruvec->lrugen; hist = lru_hist_from_seq(READ_ONCE(lrugen->min_seq[type])); /* see the comment in folio_lru_refs() */ refs = (token & (BIT(LRU_REFS_WIDTH) - 1)) + workingset; tier = lru_tier_from_refs(refs); atomic_long_add(delta, &lrugen->refaulted[hist][type][tier]); mod_lruvec_state(lruvec, WORKINGSET_ACTIVATE_BASE + type, delta); /* * Count the following two cases as stalls: * 1. For pages accessed through page tables, hotter pages pushed out * hot pages which refaulted immediately. * 2. For pages accessed multiple times through file descriptors, * they would have been protected by sort_folio(). */ if (lru_gen_in_fault() || refs >= BIT(LRU_REFS_WIDTH) - 1) { set_mask_bits(&folio->flags, 0, LRU_REFS_MASK | BIT(PG_workingset)); mod_lruvec_state(lruvec, WORKINGSET_RESTORE_BASE + type, delta); } unlock: rcu_read_unlock(); } #else /* !CONFIG_LRU_GEN */ static void *lru_gen_eviction(struct folio *folio) { return NULL; } static bool lru_gen_test_recent(void *shadow, bool file, struct lruvec **lruvec, unsigned long *token, bool *workingset) { return false; } static void lru_gen_refault(struct folio *folio, void *shadow) { } #endif /* CONFIG_LRU_GEN */ /** * workingset_age_nonresident - age non-resident entries as LRU ages * @lruvec: the lruvec that was aged * @nr_pages: the number of pages to count * * As in-memory pages are aged, non-resident pages need to be aged as * well, in order for the refault distances later on to be comparable * to the in-memory dimensions. This function allows reclaim and LRU * operations to drive the non-resident aging along in parallel. */ void workingset_age_nonresident(struct lruvec *lruvec, unsigned long nr_pages) { /* * Reclaiming a cgroup means reclaiming all its children in a * round-robin fashion. That means that each cgroup has an LRU * order that is composed of the LRU orders of its child * cgroups; and every page has an LRU position not just in the * cgroup that owns it, but in all of that group's ancestors. * * So when the physical inactive list of a leaf cgroup ages, * the virtual inactive lists of all its parents, including * the root cgroup's, age as well. */ do { atomic_long_add(nr_pages, &lruvec->nonresident_age); } while ((lruvec = parent_lruvec(lruvec))); } /** * workingset_eviction - note the eviction of a folio from memory * @target_memcg: the cgroup that is causing the reclaim * @folio: the folio being evicted * * Return: a shadow entry to be stored in @folio->mapping->i_pages in place * of the evicted @folio so that a later refault can be detected. */ void *workingset_eviction(struct folio *folio, struct mem_cgroup *target_memcg) { struct pglist_data *pgdat = folio_pgdat(folio); unsigned long eviction; struct lruvec *lruvec; int memcgid; /* Folio is fully exclusive and pins folio's memory cgroup pointer */ VM_BUG_ON_FOLIO(folio_test_lru(folio), folio); VM_BUG_ON_FOLIO(folio_ref_count(folio), folio); VM_BUG_ON_FOLIO(!folio_test_locked(folio), folio); if (lru_gen_enabled()) return lru_gen_eviction(folio); lruvec = mem_cgroup_lruvec(target_memcg, pgdat); /* XXX: target_memcg can be NULL, go through lruvec */ memcgid = mem_cgroup_id(lruvec_memcg(lruvec)); eviction = atomic_long_read(&lruvec->nonresident_age); eviction >>= bucket_order; workingset_age_nonresident(lruvec, folio_nr_pages(folio)); return pack_shadow(memcgid, pgdat, eviction, folio_test_workingset(folio)); } /** * workingset_test_recent - tests if the shadow entry is for a folio that was * recently evicted. Also fills in @workingset with the value unpacked from * shadow. * @shadow: the shadow entry to be tested. * @file: whether the corresponding folio is from the file lru. * @workingset: where the workingset value unpacked from shadow should * be stored. * @flush: whether to flush cgroup rstat. * * Return: true if the shadow is for a recently evicted folio; false otherwise. */ bool workingset_test_recent(void *shadow, bool file, bool *workingset, bool flush) { struct mem_cgroup *eviction_memcg; struct lruvec *eviction_lruvec; unsigned long refault_distance; unsigned long workingset_size; unsigned long refault; int memcgid; struct pglist_data *pgdat; unsigned long eviction; rcu_read_lock(); if (lru_gen_enabled()) { bool recent = lru_gen_test_recent(shadow, file, &eviction_lruvec, &eviction, workingset); rcu_read_unlock(); return recent; } unpack_shadow(shadow, &memcgid, &pgdat, &eviction, workingset); eviction <<= bucket_order; /* * Look up the memcg associated with the stored ID. It might * have been deleted since the folio's eviction. * * Note that in rare events the ID could have been recycled * for a new cgroup that refaults a shared folio. This is * impossible to tell from the available data. However, this * should be a rare and limited disturbance, and activations * are always speculative anyway. Ultimately, it's the aging * algorithm's job to shake out the minimum access frequency * for the active cache. * * XXX: On !CONFIG_MEMCG, this will always return NULL; it * would be better if the root_mem_cgroup existed in all * configurations instead. */ eviction_memcg = mem_cgroup_from_id(memcgid); if (!mem_cgroup_disabled() && (!eviction_memcg || !mem_cgroup_tryget(eviction_memcg))) { rcu_read_unlock(); return false; } rcu_read_unlock(); /* * Flush stats (and potentially sleep) outside the RCU read section. * * Note that workingset_test_recent() itself might be called in RCU read * section (for e.g, in cachestat) - these callers need to skip flushing * stats (via the flush argument). * * XXX: With per-memcg flushing and thresholding, is ratelimiting * still needed here? */ if (flush) mem_cgroup_flush_stats_ratelimited(eviction_memcg); eviction_lruvec = mem_cgroup_lruvec(eviction_memcg, pgdat); refault = atomic_long_read(&eviction_lruvec->nonresident_age); /* * Calculate the refault distance * * The unsigned subtraction here gives an accurate distance * across nonresident_age overflows in most cases. There is a * special case: usually, shadow entries have a short lifetime * and are either refaulted or reclaimed along with the inode * before they get too old. But it is not impossible for the * nonresident_age to lap a shadow entry in the field, which * can then result in a false small refault distance, leading * to a false activation should this old entry actually * refault again. However, earlier kernels used to deactivate * unconditionally with *every* reclaim invocation for the * longest time, so the occasional inappropriate activation * leading to pressure on the active list is not a problem. */ refault_distance = (refault - eviction) & EVICTION_MASK; /* * Compare the distance to the existing workingset size. We * don't activate pages that couldn't stay resident even if * all the memory was available to the workingset. Whether * workingset competition needs to consider anon or not depends * on having free swap space. */ workingset_size = lruvec_page_state(eviction_lruvec, NR_ACTIVE_FILE); if (!file) { workingset_size += lruvec_page_state(eviction_lruvec, NR_INACTIVE_FILE); } if (mem_cgroup_get_nr_swap_pages(eviction_memcg) > 0) { workingset_size += lruvec_page_state(eviction_lruvec, NR_ACTIVE_ANON); if (file) { workingset_size += lruvec_page_state(eviction_lruvec, NR_INACTIVE_ANON); } } mem_cgroup_put(eviction_memcg); return refault_distance <= workingset_size; } /** * workingset_refault - Evaluate the refault of a previously evicted folio. * @folio: The freshly allocated replacement folio. * @shadow: Shadow entry of the evicted folio. * * Calculates and evaluates the refault distance of the previously * evicted folio in the context of the node and the memcg whose memory * pressure caused the eviction. */ void workingset_refault(struct folio *folio, void *shadow) { bool file = folio_is_file_lru(folio); struct pglist_data *pgdat; struct mem_cgroup *memcg; struct lruvec *lruvec; bool workingset; long nr; if (lru_gen_enabled()) { lru_gen_refault(folio, shadow); return; } /* * The activation decision for this folio is made at the level * where the eviction occurred, as that is where the LRU order * during folio reclaim is being determined. * * However, the cgroup that will own the folio is the one that * is actually experiencing the refault event. Make sure the folio is * locked to guarantee folio_memcg() stability throughout. */ VM_BUG_ON_FOLIO(!folio_test_locked(folio), folio); nr = folio_nr_pages(folio); memcg = folio_memcg(folio); pgdat = folio_pgdat(folio); lruvec = mem_cgroup_lruvec(memcg, pgdat); mod_lruvec_state(lruvec, WORKINGSET_REFAULT_BASE + file, nr); if (!workingset_test_recent(shadow, file, &workingset, true)) return; folio_set_active(folio); workingset_age_nonresident(lruvec, nr); mod_lruvec_state(lruvec, WORKINGSET_ACTIVATE_BASE + file, nr); /* Folio was active prior to eviction */ if (workingset) { folio_set_workingset(folio); /* * XXX: Move to folio_add_lru() when it supports new vs * putback */ lru_note_cost_refault(folio); mod_lruvec_state(lruvec, WORKINGSET_RESTORE_BASE + file, nr); } } /** * workingset_activation - note a page activation * @folio: Folio that is being activated. */ void workingset_activation(struct folio *folio) { struct mem_cgroup *memcg; rcu_read_lock(); /* * Filter non-memcg pages here, e.g. unmap can call * mark_page_accessed() on VDSO pages. * * XXX: See workingset_refault() - this should return * root_mem_cgroup even for !CONFIG_MEMCG. */ memcg = folio_memcg_rcu(folio); if (!mem_cgroup_disabled() && !memcg) goto out; workingset_age_nonresident(folio_lruvec(folio), folio_nr_pages(folio)); out: rcu_read_unlock(); } /* * Shadow entries reflect the share of the working set that does not * fit into memory, so their number depends on the access pattern of * the workload. In most cases, they will refault or get reclaimed * along with the inode, but a (malicious) workload that streams * through files with a total size several times that of available * memory, while preventing the inodes from being reclaimed, can * create excessive amounts of shadow nodes. To keep a lid on this, * track shadow nodes and reclaim them when they grow way past the * point where they would still be useful. */ struct list_lru shadow_nodes; void workingset_update_node(struct xa_node *node) { struct address_space *mapping; /* * Track non-empty nodes that contain only shadow entries; * unlink those that contain pages or are being freed. * * Avoid acquiring the list_lru lock when the nodes are * already where they should be. The list_empty() test is safe * as node->private_list is protected by the i_pages lock. */ mapping = container_of(node->array, struct address_space, i_pages); lockdep_assert_held(&mapping->i_pages.xa_lock); if (node->count && node->count == node->nr_values) { if (list_empty(&node->private_list)) { list_lru_add_obj(&shadow_nodes, &node->private_list); __inc_lruvec_kmem_state(node, WORKINGSET_NODES); } } else { if (!list_empty(&node->private_list)) { list_lru_del_obj(&shadow_nodes, &node->private_list); __dec_lruvec_kmem_state(node, WORKINGSET_NODES); } } } static unsigned long count_shadow_nodes(struct shrinker *shrinker, struct shrink_control *sc) { unsigned long max_nodes; unsigned long nodes; unsigned long pages; nodes = list_lru_shrink_count(&shadow_nodes, sc); if (!nodes) return SHRINK_EMPTY; /* * Approximate a reasonable limit for the nodes * containing shadow entries. We don't need to keep more * shadow entries than possible pages on the active list, * since refault distances bigger than that are dismissed. * * The size of the active list converges toward 100% of * overall page cache as memory grows, with only a tiny * inactive list. Assume the total cache size for that. * * Nodes might be sparsely populated, with only one shadow * entry in the extreme case. Obviously, we cannot keep one * node for every eligible shadow entry, so compromise on a * worst-case density of 1/8th. Below that, not all eligible * refaults can be detected anymore. * * On 64-bit with 7 xa_nodes per page and 64 slots * each, this will reclaim shadow entries when they consume * ~1.8% of available memory: * * PAGE_SIZE / xa_nodes / node_entries * 8 / PAGE_SIZE */ #ifdef CONFIG_MEMCG if (sc->memcg) { struct lruvec *lruvec; int i; mem_cgroup_flush_stats_ratelimited(sc->memcg); lruvec = mem_cgroup_lruvec(sc->memcg, NODE_DATA(sc->nid)); for (pages = 0, i = 0; i < NR_LRU_LISTS; i++) pages += lruvec_page_state_local(lruvec, NR_LRU_BASE + i); pages += lruvec_page_state_local( lruvec, NR_SLAB_RECLAIMABLE_B) >> PAGE_SHIFT; pages += lruvec_page_state_local( lruvec, NR_SLAB_UNRECLAIMABLE_B) >> PAGE_SHIFT; } else #endif pages = node_present_pages(sc->nid); max_nodes = pages >> (XA_CHUNK_SHIFT - 3); if (nodes <= max_nodes) return 0; return nodes - max_nodes; } static enum lru_status shadow_lru_isolate(struct list_head *item, struct list_lru_one *lru, spinlock_t *lru_lock, void *arg) __must_hold(lru_lock) { struct xa_node *node = container_of(item, struct xa_node, private_list); struct address_space *mapping; int ret; /* * Page cache insertions and deletions synchronously maintain * the shadow node LRU under the i_pages lock and the * lru_lock. Because the page cache tree is emptied before * the inode can be destroyed, holding the lru_lock pins any * address_space that has nodes on the LRU. * * We can then safely transition to the i_pages lock to * pin only the address_space of the particular node we want * to reclaim, take the node off-LRU, and drop the lru_lock. */ mapping = container_of(node->array, struct address_space, i_pages); /* Coming from the list, invert the lock order */ if (!xa_trylock(&mapping->i_pages)) { spin_unlock_irq(lru_lock); ret = LRU_RETRY; goto out; } /* For page cache we need to hold i_lock */ if (mapping->host != NULL) { if (!spin_trylock(&mapping->host->i_lock)) { xa_unlock(&mapping->i_pages); spin_unlock_irq(lru_lock); ret = LRU_RETRY; goto out; } } list_lru_isolate(lru, item); __dec_lruvec_kmem_state(node, WORKINGSET_NODES); spin_unlock(lru_lock); /* * The nodes should only contain one or more shadow entries, * no pages, so we expect to be able to remove them all and * delete and free the empty node afterwards. */ if (WARN_ON_ONCE(!node->nr_values)) goto out_invalid; if (WARN_ON_ONCE(node->count != node->nr_values)) goto out_invalid; xa_delete_node(node, workingset_update_node); __inc_lruvec_kmem_state(node, WORKINGSET_NODERECLAIM); out_invalid: xa_unlock_irq(&mapping->i_pages); if (mapping->host != NULL) { if (mapping_shrinkable(mapping)) inode_add_lru(mapping->host); spin_unlock(&mapping->host->i_lock); } ret = LRU_REMOVED_RETRY; out: cond_resched(); spin_lock_irq(lru_lock); return ret; } static unsigned long scan_shadow_nodes(struct shrinker *shrinker, struct shrink_control *sc) { /* list_lru lock nests inside the IRQ-safe i_pages lock */ return list_lru_shrink_walk_irq(&shadow_nodes, sc, shadow_lru_isolate, NULL); } /* * Our list_lru->lock is IRQ-safe as it nests inside the IRQ-safe * i_pages lock. */ static struct lock_class_key shadow_nodes_key; static int __init workingset_init(void) { struct shrinker *workingset_shadow_shrinker; unsigned int timestamp_bits; unsigned int max_order; int ret = -ENOMEM; BUILD_BUG_ON(BITS_PER_LONG < EVICTION_SHIFT); /* * Calculate the eviction bucket size to cover the longest * actionable refault distance, which is currently half of * memory (totalram_pages/2). However, memory hotplug may add * some more pages at runtime, so keep working with up to * double the initial memory by using totalram_pages as-is. */ timestamp_bits = BITS_PER_LONG - EVICTION_SHIFT; max_order = fls_long(totalram_pages() - 1); if (max_order > timestamp_bits) bucket_order = max_order - timestamp_bits; pr_info("workingset: timestamp_bits=%d max_order=%d bucket_order=%u\n", timestamp_bits, max_order, bucket_order); workingset_shadow_shrinker = shrinker_alloc(SHRINKER_NUMA_AWARE | SHRINKER_MEMCG_AWARE, "mm-shadow"); if (!workingset_shadow_shrinker) goto err; ret = __list_lru_init(&shadow_nodes, true, &shadow_nodes_key, workingset_shadow_shrinker); if (ret) goto err_list_lru; workingset_shadow_shrinker->count_objects = count_shadow_nodes; workingset_shadow_shrinker->scan_objects = scan_shadow_nodes; /* ->count reports only fully expendable nodes */ workingset_shadow_shrinker->seeks = 0; shrinker_register(workingset_shadow_shrinker); return 0; err_list_lru: shrinker_free(workingset_shadow_shrinker); err: return ret; } module_init(workingset_init);