#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
#
# This test is for checking VXLAN MDB functionality. The topology consists of
# two sets of namespaces: One for the testing of IPv4 underlay and another for
# IPv6. In both cases, both IPv4 and IPv6 overlay traffic are tested.
#
# Data path functionality is tested by sending traffic from one of the upper
# namespaces and checking using ingress tc filters that the expected traffic
# was received by one of the lower namespaces.
#
# +------------------------------------+ +------------------------------------+
# | ns1_v4                             | | ns1_v6                             |
# |                                    | |                                    |
# |    br0.10    br0.4000  br0.20      | |    br0.10    br0.4000  br0.20      |
# |       +         +         +        | |       +         +         +        |
# |       |         |         |        | |       |         |         |        |
# |       |         |         |        | |       |         |         |        |
# |       +---------+---------+        | |       +---------+---------+        |
# |                 |                  | |                 |                  |
# |                 |                  | |                 |                  |
# |                 +                  | |                 +                  |
# |                br0                 | |                br0                 |
# |                 +                  | |                 +                  |
# |                 |                  | |                 |                  |
# |                 |                  | |                 |                  |
# |                 +                  | |                 +                  |
# |                vx0                 | |                vx0                 |
# |                                    | |                                    |
# |                                    | |                                    |
# |               veth0                | |               veth0                |
# |                 +                  | |                 +                  |
# +-----------------|------------------+ +-----------------|------------------+
#                   |                                      |
# +-----------------|------------------+ +-----------------|------------------+
# |                 +                  | |                 +                  |
# |               veth0                | |               veth0                |
# |                                    | |                                    |
# |                                    | |                                    |
# |                vx0                 | |                vx0                 |
# |                 +                  | |                 +                  |
# |                 |                  | |                 |                  |
# |                 |                  | |                 |                  |
# |                 +                  | |                 +                  |
# |                br0                 | |                br0                 |
# |                 +                  | |                 +                  |
# |                 |                  | |                 |                  |
# |                 |                  | |                 |                  |
# |       +---------+---------+        | |       +---------+---------+        |
# |       |         |         |        | |       |         |         |        |
# |       |         |         |        | |       |         |         |        |
# |       +         +         +        | |       +         +         +        |
# |    br0.10    br0.4000  br0.10      | |    br0.10    br0.4000  br0.20      |
# |                                    | |                                    |
# | ns2_v4                             | | ns2_v6                             |
# +------------------------------------+ +------------------------------------+

source lib.sh
ret=0

CONTROL_PATH_TESTS="
	basic_star_g_ipv4_ipv4
	basic_star_g_ipv6_ipv4
	basic_star_g_ipv4_ipv6
	basic_star_g_ipv6_ipv6
	basic_sg_ipv4_ipv4
	basic_sg_ipv6_ipv4
	basic_sg_ipv4_ipv6
	basic_sg_ipv6_ipv6
	star_g_ipv4_ipv4
	star_g_ipv6_ipv4
	star_g_ipv4_ipv6
	star_g_ipv6_ipv6
	sg_ipv4_ipv4
	sg_ipv6_ipv4
	sg_ipv4_ipv6
	sg_ipv6_ipv6
	dump_ipv4_ipv4
	dump_ipv6_ipv4
	dump_ipv4_ipv6
	dump_ipv6_ipv6
	flush
"

DATA_PATH_TESTS="
	encap_params_ipv4_ipv4
	encap_params_ipv6_ipv4
	encap_params_ipv4_ipv6
	encap_params_ipv6_ipv6
	starg_exclude_ir_ipv4_ipv4
	starg_exclude_ir_ipv6_ipv4
	starg_exclude_ir_ipv4_ipv6
	starg_exclude_ir_ipv6_ipv6
	starg_include_ir_ipv4_ipv4
	starg_include_ir_ipv6_ipv4
	starg_include_ir_ipv4_ipv6
	starg_include_ir_ipv6_ipv6
	starg_exclude_p2mp_ipv4_ipv4
	starg_exclude_p2mp_ipv6_ipv4
	starg_exclude_p2mp_ipv4_ipv6
	starg_exclude_p2mp_ipv6_ipv6
	starg_include_p2mp_ipv4_ipv4
	starg_include_p2mp_ipv6_ipv4
	starg_include_p2mp_ipv4_ipv6
	starg_include_p2mp_ipv6_ipv6
	egress_vni_translation_ipv4_ipv4
	egress_vni_translation_ipv6_ipv4
	egress_vni_translation_ipv4_ipv6
	egress_vni_translation_ipv6_ipv6
	all_zeros_mdb_ipv4
	all_zeros_mdb_ipv6
	mdb_fdb_ipv4_ipv4
	mdb_fdb_ipv6_ipv4
	mdb_fdb_ipv4_ipv6
	mdb_fdb_ipv6_ipv6
	mdb_torture_ipv4_ipv4
	mdb_torture_ipv6_ipv4
	mdb_torture_ipv4_ipv6
	mdb_torture_ipv6_ipv6
"

# All tests in this script. Can be overridden with -t option.
TESTS="
	$CONTROL_PATH_TESTS
	$DATA_PATH_TESTS
"
VERBOSE=0
PAUSE_ON_FAIL=no
PAUSE=no

################################################################################
# Utilities

log_test()
{
	local rc=$1
	local expected=$2
	local msg="$3"

	if [ ${rc} -eq ${expected} ]; then
		printf "TEST: %-60s  [ OK ]\n" "${msg}"
		nsuccess=$((nsuccess+1))
	else
		ret=1
		nfail=$((nfail+1))
		printf "TEST: %-60s  [FAIL]\n" "${msg}"
		if [ "$VERBOSE" = "1" ]; then
			echo "    rc=$rc, expected $expected"
		fi

		if [ "${PAUSE_ON_FAIL}" = "yes" ]; then
		echo
			echo "hit enter to continue, 'q' to quit"
			read a
			[ "$a" = "q" ] && exit 1
		fi
	fi

	if [ "${PAUSE}" = "yes" ]; then
		echo
		echo "hit enter to continue, 'q' to quit"
		read a
		[ "$a" = "q" ] && exit 1
	fi

	[ "$VERBOSE" = "1" ] && echo
}

run_cmd()
{
	local cmd="$1"
	local out
	local stderr="2>/dev/null"

	if [ "$VERBOSE" = "1" ]; then
		printf "COMMAND: $cmd\n"
		stderr=
	fi

	out=$(eval $cmd $stderr)
	rc=$?
	if [ "$VERBOSE" = "1" -a -n "$out" ]; then
		echo "    $out"
	fi

	return $rc
}

tc_check_packets()
{
	local ns=$1; shift
	local id=$1; shift
	local handle=$1; shift
	local count=$1; shift
	local pkts

	sleep 0.1
	pkts=$(tc -n $ns -j -s filter show $id \
		| jq ".[] | select(.options.handle == $handle) | \
		.options.actions[0].stats.packets")
	[[ $pkts == $count ]]
}

################################################################################
# Setup

setup_common_ns()
{
	local ns=$1; shift
	local local_addr=$1; shift

	ip netns exec $ns sysctl -qw net.ipv4.ip_forward=1
	ip netns exec $ns sysctl -qw net.ipv4.fib_multipath_use_neigh=1
	ip netns exec $ns sysctl -qw net.ipv4.conf.default.ignore_routes_with_linkdown=1
	ip netns exec $ns sysctl -qw net.ipv6.conf.all.keep_addr_on_down=1
	ip netns exec $ns sysctl -qw net.ipv6.conf.all.forwarding=1
	ip netns exec $ns sysctl -qw net.ipv6.conf.default.forwarding=1
	ip netns exec $ns sysctl -qw net.ipv6.conf.default.ignore_routes_with_linkdown=1
	ip netns exec $ns sysctl -qw net.ipv6.conf.all.accept_dad=0
	ip netns exec $ns sysctl -qw net.ipv6.conf.default.accept_dad=0

	ip -n $ns link set dev lo up
	ip -n $ns address add $local_addr dev lo

	ip -n $ns link set dev veth0 up

	ip -n $ns link add name br0 up type bridge vlan_filtering 1 \
		vlan_default_pvid 0 mcast_snooping 0

	ip -n $ns link add link br0 name br0.10 up type vlan id 10
	bridge -n $ns vlan add vid 10 dev br0 self

	ip -n $ns link add link br0 name br0.20 up type vlan id 20
	bridge -n $ns vlan add vid 20 dev br0 self

	ip -n $ns link add link br0 name br0.4000 up type vlan id 4000
	bridge -n $ns vlan add vid 4000 dev br0 self

	ip -n $ns link add name vx0 up master br0 type vxlan \
		local $local_addr dstport 4789 external vnifilter
	bridge -n $ns link set dev vx0 vlan_tunnel on

	bridge -n $ns vlan add vid 10 dev vx0
	bridge -n $ns vlan add vid 10 dev vx0 tunnel_info id 10010
	bridge -n $ns vni add vni 10010 dev vx0

	bridge -n $ns vlan add vid 20 dev vx0
	bridge -n $ns vlan add vid 20 dev vx0 tunnel_info id 10020
	bridge -n $ns vni add vni 10020 dev vx0

	bridge -n $ns vlan add vid 4000 dev vx0 pvid
	bridge -n $ns vlan add vid 4000 dev vx0 tunnel_info id 14000
	bridge -n $ns vni add vni 14000 dev vx0
}

setup_common()
{
	local ns1=$1; shift
	local ns2=$1; shift
	local local_addr1=$1; shift
	local local_addr2=$1; shift

	ip link add name veth0 type veth peer name veth1
	ip link set dev veth0 netns $ns1 name veth0
	ip link set dev veth1 netns $ns2 name veth0

	setup_common_ns $ns1 $local_addr1
	setup_common_ns $ns2 $local_addr2
}

setup_v4()
{
	setup_ns ns1_v4 ns2_v4
	setup_common $ns1_v4 $ns2_v4 192.0.2.1 192.0.2.2

	ip -n $ns1_v4 address add 192.0.2.17/28 dev veth0
	ip -n $ns2_v4 address add 192.0.2.18/28 dev veth0

	ip -n $ns1_v4 route add default via 192.0.2.18
	ip -n $ns2_v4 route add default via 192.0.2.17
}

cleanup_v4()
{
	cleanup_ns $ns2_v4 $ns1_v4
}

setup_v6()
{
	setup_ns ns1_v6 ns2_v6
	setup_common $ns1_v6 $ns2_v6 2001:db8:1::1 2001:db8:1::2

	ip -n $ns1_v6 address add 2001:db8:2::1/64 dev veth0 nodad
	ip -n $ns2_v6 address add 2001:db8:2::2/64 dev veth0 nodad

	ip -n $ns1_v6 route add default via 2001:db8:2::2
	ip -n $ns2_v6 route add default via 2001:db8:2::1
}

cleanup_v6()
{
	cleanup_ns $ns2_v6 $ns1_v6
}

setup()
{
	set -e

	setup_v4
	setup_v6

	sleep 5

	set +e
}

cleanup()
{
	cleanup_v6 &> /dev/null
	cleanup_v4 &> /dev/null
}

################################################################################
# Tests - Control path

basic_common()
{
	local ns1=$1; shift
	local grp_key=$1; shift
	local vtep_ip=$1; shift

	# Test basic control path operations common to all MDB entry types.

	# Basic add, replace and delete behavior.
	run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 $grp_key permanent dst $vtep_ip src_vni 10010"
	log_test $? 0 "MDB entry addition"
	run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 $grp_key src_vni 10010"
	log_test $? 0 "MDB entry presence after addition"

	run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 $grp_key permanent dst $vtep_ip src_vni 10010"
	log_test $? 0 "MDB entry replacement"
	run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 $grp_key src_vni 10010"
	log_test $? 0 "MDB entry presence after replacement"

	run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 $grp_key dst $vtep_ip src_vni 10010"
	log_test $? 0 "MDB entry deletion"
	run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 $grp_key src_vni 10010"
	log_test $? 254 "MDB entry presence after deletion"

	run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 $grp_key dst $vtep_ip src_vni 10010"
	log_test $? 255 "Non-existent MDB entry deletion"

	# Default protocol and replacement.
	run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 $grp_key permanent dst $vtep_ip src_vni 10010"
	run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 $grp_key src_vni 10010 | grep \"proto static\""
	log_test $? 0 "MDB entry default protocol"

	run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 $grp_key permanent proto 123 dst $vtep_ip src_vni 10010"
	run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 $grp_key src_vni 10010 | grep \"proto 123\""
	log_test $? 0 "MDB entry protocol replacement"

	run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 $grp_key dst $vtep_ip src_vni 10010"

	# Default destination port and replacement.
	run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 $grp_key permanent dst $vtep_ip src_vni 10010"
	run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 $grp_key src_vni 10010 | grep \" dst_port \""
	log_test $? 1 "MDB entry default destination port"

	run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 $grp_key permanent dst $vtep_ip dst_port 1234 src_vni 10010"
	run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 $grp_key src_vni 10010 | grep \"dst_port 1234\""
	log_test $? 0 "MDB entry destination port replacement"

	run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 $grp_key dst $vtep_ip src_vni 10010"

	# Default destination VNI and replacement.
	run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 $grp_key permanent dst $vtep_ip src_vni 10010"
	run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 $grp_key src_vni 10010 | grep \" vni \""
	log_test $? 1 "MDB entry default destination VNI"

	run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 $grp_key permanent dst $vtep_ip vni 1234 src_vni 10010"
	run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 $grp_key src_vni 10010 | grep \"vni 1234\""
	log_test $? 0 "MDB entry destination VNI replacement"

	run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 $grp_key dst $vtep_ip src_vni 10010"

	# Default outgoing interface and replacement.
	run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 $grp_key permanent dst $vtep_ip src_vni 10010"
	run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 $grp_key src_vni 10010 | grep \" via \""
	log_test $? 1 "MDB entry default outgoing interface"

	run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 $grp_key permanent dst $vtep_ip src_vni 10010 via veth0"
	run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 $grp_key src_vni 10010 | grep \"via veth0\""
	log_test $? 0 "MDB entry outgoing interface replacement"

	run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 $grp_key dst $vtep_ip src_vni 10010"

	# Common error cases.
	run_cmd "bridge -n $ns1 mdb add dev vx0 port veth0 $grp_key permanent dst $vtep_ip src_vni 10010"
	log_test $? 255 "MDB entry with mismatch between device and port"

	run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 $grp_key temp dst $vtep_ip src_vni 10010"
	log_test $? 255 "MDB entry with temp state"

	run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 $grp_key permanent vid 10 dst $vtep_ip src_vni 10010"
	log_test $? 255 "MDB entry with VLAN"

	run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 grp 01:02:03:04:05:06 permanent dst $vtep_ip src_vni 10010"
	log_test $? 255 "MDB entry MAC address"

	run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 $grp_key permanent"
	log_test $? 255 "MDB entry without extended parameters"

	run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 $grp_key permanent proto 3 dst $vtep_ip src_vni 10010"
	log_test $? 255 "MDB entry with an invalid protocol"

	run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 $grp_key permanent dst $vtep_ip vni $((2 ** 24)) src_vni 10010"
	log_test $? 255 "MDB entry with an invalid destination VNI"

	run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 $grp_key permanent dst $vtep_ip src_vni $((2 ** 24))"
	log_test $? 255 "MDB entry with an invalid source VNI"

	run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 $grp_key permanent src_vni 10010"
	log_test $? 255 "MDB entry without a remote destination IP"

	run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 $grp_key permanent dst $vtep_ip src_vni 10010"
	run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 $grp_key permanent dst $vtep_ip src_vni 10010"
	log_test $? 255 "Duplicate MDB entries"
	run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 $grp_key dst $vtep_ip src_vni 10010"
}

basic_star_g_ipv4_ipv4()
{
	local ns1=$ns1_v4
	local grp_key="grp 239.1.1.1"
	local vtep_ip=198.51.100.100

	echo
	echo "Control path: Basic (*, G) operations - IPv4 overlay / IPv4 underlay"
	echo "--------------------------------------------------------------------"

	basic_common $ns1 "$grp_key" $vtep_ip
}

basic_star_g_ipv6_ipv4()
{
	local ns1=$ns1_v4
	local grp_key="grp ff0e::1"
	local vtep_ip=198.51.100.100

	echo
	echo "Control path: Basic (*, G) operations - IPv6 overlay / IPv4 underlay"
	echo "--------------------------------------------------------------------"

	basic_common $ns1 "$grp_key" $vtep_ip
}

basic_star_g_ipv4_ipv6()
{
	local ns1=$ns1_v6
	local grp_key="grp 239.1.1.1"
	local vtep_ip=2001:db8:1000::1

	echo
	echo "Control path: Basic (*, G) operations - IPv4 overlay / IPv6 underlay"
	echo "--------------------------------------------------------------------"

	basic_common $ns1 "$grp_key" $vtep_ip
}

basic_star_g_ipv6_ipv6()
{
	local ns1=$ns1_v6
	local grp_key="grp ff0e::1"
	local vtep_ip=2001:db8:1000::1

	echo
	echo "Control path: Basic (*, G) operations - IPv6 overlay / IPv6 underlay"
	echo "--------------------------------------------------------------------"

	basic_common $ns1 "$grp_key" $vtep_ip
}

basic_sg_ipv4_ipv4()
{
	local ns1=$ns1_v4
	local grp_key="grp 239.1.1.1 src 192.0.2.129"
	local vtep_ip=198.51.100.100

	echo
	echo "Control path: Basic (S, G) operations - IPv4 overlay / IPv4 underlay"
	echo "--------------------------------------------------------------------"

	basic_common $ns1 "$grp_key" $vtep_ip
}

basic_sg_ipv6_ipv4()
{
	local ns1=$ns1_v4
	local grp_key="grp ff0e::1 src 2001:db8:100::1"
	local vtep_ip=198.51.100.100

	echo
	echo "Control path: Basic (S, G) operations - IPv6 overlay / IPv4 underlay"
	echo "---------------------------------------------------------------------"

	basic_common $ns1 "$grp_key" $vtep_ip
}

basic_sg_ipv4_ipv6()
{
	local ns1=$ns1_v6
	local grp_key="grp 239.1.1.1 src 192.0.2.129"
	local vtep_ip=2001:db8:1000::1

	echo
	echo "Control path: Basic (S, G) operations - IPv4 overlay / IPv6 underlay"
	echo "--------------------------------------------------------------------"

	basic_common $ns1 "$grp_key" $vtep_ip
}

basic_sg_ipv6_ipv6()
{
	local ns1=$ns1_v6
	local grp_key="grp ff0e::1 src 2001:db8:100::1"
	local vtep_ip=2001:db8:1000::1

	echo
	echo "Control path: Basic (S, G) operations - IPv6 overlay / IPv6 underlay"
	echo "--------------------------------------------------------------------"

	basic_common $ns1 "$grp_key" $vtep_ip
}

star_g_common()
{
	local ns1=$1; shift
	local grp=$1; shift
	local src1=$1; shift
	local src2=$1; shift
	local src3=$1; shift
	local vtep_ip=$1; shift
	local all_zeros_grp=$1; shift

	# Test control path operations specific to (*, G) entries.

	# Basic add, replace and delete behavior.
	run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 grp $grp permanent filter_mode exclude source_list $src1 dst $vtep_ip src_vni 10010"
	log_test $? 0 "(*, G) MDB entry addition with source list"
	run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src_vni 10010"
	log_test $? 0 "(*, G) MDB entry presence after addition"
	run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src $src1 src_vni 10010"
	log_test $? 0 "(S, G) MDB entry presence after addition"

	run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent filter_mode exclude source_list $src1 dst $vtep_ip src_vni 10010"
	log_test $? 0 "(*, G) MDB entry replacement with source list"
	run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src_vni 10010"
	log_test $? 0 "(*, G) MDB entry presence after replacement"
	run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src $src1 src_vni 10010"
	log_test $? 0 "(S, G) MDB entry presence after replacement"

	run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 grp $grp dst $vtep_ip src_vni 10010"
	log_test $? 0 "(*, G) MDB entry deletion"
	run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src_vni 10010"
	log_test $? 254 "(*, G) MDB entry presence after deletion"
	run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src $src1 src_vni 10010"
	log_test $? 254 "(S, G) MDB entry presence after deletion"

	# Default filter mode and replacement.
	run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 grp $grp permanent dst $vtep_ip src_vni 10010"
	run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src_vni 10010 | grep exclude"
	log_test $? 0 "(*, G) MDB entry default filter mode"

	run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent filter_mode include source_list $src1 dst $vtep_ip src_vni 10010"
	run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src_vni 10010 | grep include"
	log_test $? 0 "(*, G) MDB entry after replacing filter mode to \"include\""
	run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src $src1 src_vni 10010"
	log_test $? 0 "(S, G) MDB entry after replacing filter mode to \"include\""
	run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src $src1 src_vni 10010 | grep blocked"
	log_test $? 1 "\"blocked\" flag after replacing filter mode to \"include\""

	run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent filter_mode exclude source_list $src1 dst $vtep_ip src_vni 10010"
	run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src_vni 10010 | grep exclude"
	log_test $? 0 "(*, G) MDB entry after replacing filter mode to \"exclude\""
	run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grep grp $grp src $src1 src_vni 10010"
	log_test $? 0 "(S, G) MDB entry after replacing filter mode to \"exclude\""
	run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src $src1 src_vni 10010 | grep blocked"
	log_test $? 0 "\"blocked\" flag after replacing filter mode to \"exclude\""

	run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 grp $grp dst $vtep_ip src_vni 10010"

	# Default source list and replacement.
	run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 grp $grp permanent dst $vtep_ip src_vni 10010"
	run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src_vni 10010 | grep source_list"
	log_test $? 1 "(*, G) MDB entry default source list"

	run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent filter_mode exclude source_list $src1,$src2,$src3 dst $vtep_ip src_vni 10010"
	run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src $src1 src_vni 10010"
	log_test $? 0 "(S, G) MDB entry of 1st source after replacing source list"
	run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src $src2 src_vni 10010"
	log_test $? 0 "(S, G) MDB entry of 2nd source after replacing source list"
	run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src $src3 src_vni 10010"
	log_test $? 0 "(S, G) MDB entry of 3rd source after replacing source list"

	run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent filter_mode exclude source_list $src1,$src3 dst $vtep_ip src_vni 10010"
	run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src $src1 src_vni 10010"
	log_test $? 0 "(S, G) MDB entry of 1st source after removing source"
	run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src $src2 src_vni 10010"
	log_test $? 254 "(S, G) MDB entry of 2nd source after removing source"
	run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src $src3 src_vni 10010"
	log_test $? 0 "(S, G) MDB entry of 3rd source after removing source"

	run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 grp $grp dst $vtep_ip src_vni 10010"

	# Default protocol and replacement.
	run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 grp $grp permanent filter_mode exclude source_list $src1 dst $vtep_ip src_vni 10010"
	run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src_vni 10010 | grep \"proto static\""
	log_test $? 0 "(*, G) MDB entry default protocol"
	run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src $src1 src_vni 10010 | grep \"proto static\""
	log_test $? 0 "(S, G) MDB entry default protocol"

	run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent filter_mode exclude source_list $src1 proto bgp dst $vtep_ip src_vni 10010"
	run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src_vni 10010 | grep \"proto bgp\""
	log_test $? 0 "(*, G) MDB entry protocol after replacement"
	run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src $src1 src_vni 10010 | grep \"proto bgp\""
	log_test $? 0 "(S, G) MDB entry protocol after replacement"

	run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 grp $grp dst $vtep_ip src_vni 10010"

	# Default destination port and replacement.
	run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 grp $grp permanent filter_mode exclude source_list $src1 dst $vtep_ip src_vni 10010"
	run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src_vni 10010 | grep \" dst_port \""
	log_test $? 1 "(*, G) MDB entry default destination port"
	run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src $src1 src_vni 10010 | grep \" dst_port \""
	log_test $? 1 "(S, G) MDB entry default destination port"

	run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent filter_mode exclude source_list $src1 dst $vtep_ip dst_port 1234 src_vni 10010"
	run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src_vni 10010 | grep \" dst_port 1234 \""
	log_test $? 0 "(*, G) MDB entry destination port after replacement"
	run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src $src1 src_vni 10010 | grep \" dst_port 1234 \""
	log_test $? 0 "(S, G) MDB entry destination port after replacement"

	run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 grp $grp dst $vtep_ip src_vni 10010"

	# Default destination VNI and replacement.
	run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 grp $grp permanent filter_mode exclude source_list $src1 dst $vtep_ip src_vni 10010"
	run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src_vni 10010 | grep \" vni \""
	log_test $? 1 "(*, G) MDB entry default destination VNI"
	run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src $src1 src_vni 10010 | grep \" vni \""
	log_test $? 1 "(S, G) MDB entry default destination VNI"

	run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent filter_mode exclude source_list $src1 dst $vtep_ip vni 1234 src_vni 10010"
	run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src_vni 10010 | grep \" vni 1234 \""
	log_test $? 0 "(*, G) MDB entry destination VNI after replacement"
	run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src $src1 src_vni 10010 | grep \" vni 1234 \""
	log_test $? 0 "(S, G) MDB entry destination VNI after replacement"

	run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 grp $grp dst $vtep_ip src_vni 10010"

	# Default outgoing interface and replacement.
	run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 grp $grp permanent filter_mode exclude source_list $src1 dst $vtep_ip src_vni 10010"
	run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src_vni 10010 | grep \" via \""
	log_test $? 1 "(*, G) MDB entry default outgoing interface"
	run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src $src1 src_vni 10010 | grep \" via \""
	log_test $? 1 "(S, G) MDB entry default outgoing interface"

	run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent filter_mode exclude source_list $src1 dst $vtep_ip src_vni 10010 via veth0"
	run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src_vni 10010 | grep \" via veth0 \""
	log_test $? 0 "(*, G) MDB entry outgoing interface after replacement"
	run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src $src1 src_vni 10010 | grep \" via veth0 \""
	log_test $? 0 "(S, G) MDB entry outgoing interface after replacement"

	run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 grp $grp dst $vtep_ip src_vni 10010"

	# Error cases.
	run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 grp $all_zeros_grp permanent filter_mode exclude dst $vtep_ip src_vni 10010"
	log_test $? 255 "All-zeros group with filter mode"

	run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 grp $all_zeros_grp permanent source_list $src1 dst $vtep_ip src_vni 10010"
	log_test $? 255 "All-zeros group with source list"

	run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 grp $grp permanent filter_mode include dst $vtep_ip src_vni 10010"
	log_test $? 255 "(*, G) INCLUDE with an empty source list"

	run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 grp $grp permanent filter_mode exclude source_list $grp dst $vtep_ip src_vni 10010"
	log_test $? 255 "Invalid source in source list"

	run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 grp $grp permanent source_list $src1 dst $vtep_ip src_vni 10010"
	log_test $? 255 "Source list without filter mode"
}

star_g_ipv4_ipv4()
{
	local ns1=$ns1_v4
	local grp=239.1.1.1
	local src1=192.0.2.129
	local src2=192.0.2.130
	local src3=192.0.2.131
	local vtep_ip=198.51.100.100
	local all_zeros_grp=0.0.0.0

	echo
	echo "Control path: (*, G) operations - IPv4 overlay / IPv4 underlay"
	echo "--------------------------------------------------------------"

	star_g_common $ns1 $grp $src1 $src2 $src3 $vtep_ip $all_zeros_grp
}

star_g_ipv6_ipv4()
{
	local ns1=$ns1_v4
	local grp=ff0e::1
	local src1=2001:db8:100::1
	local src2=2001:db8:100::2
	local src3=2001:db8:100::3
	local vtep_ip=198.51.100.100
	local all_zeros_grp=::

	echo
	echo "Control path: (*, G) operations - IPv6 overlay / IPv4 underlay"
	echo "--------------------------------------------------------------"

	star_g_common $ns1 $grp $src1 $src2 $src3 $vtep_ip $all_zeros_grp
}

star_g_ipv4_ipv6()
{
	local ns1=$ns1_v6
	local grp=239.1.1.1
	local src1=192.0.2.129
	local src2=192.0.2.130
	local src3=192.0.2.131
	local vtep_ip=2001:db8:1000::1
	local all_zeros_grp=0.0.0.0

	echo
	echo "Control path: (*, G) operations - IPv4 overlay / IPv6 underlay"
	echo "--------------------------------------------------------------"

	star_g_common $ns1 $grp $src1 $src2 $src3 $vtep_ip $all_zeros_grp
}

star_g_ipv6_ipv6()
{
	local ns1=$ns1_v6
	local grp=ff0e::1
	local src1=2001:db8:100::1
	local src2=2001:db8:100::2
	local src3=2001:db8:100::3
	local vtep_ip=2001:db8:1000::1
	local all_zeros_grp=::

	echo
	echo "Control path: (*, G) operations - IPv6 overlay / IPv6 underlay"
	echo "--------------------------------------------------------------"

	star_g_common $ns1 $grp $src1 $src2 $src3 $vtep_ip $all_zeros_grp
}

sg_common()
{
	local ns1=$1; shift
	local grp=$1; shift
	local src=$1; shift
	local vtep_ip=$1; shift
	local all_zeros_grp=$1; shift

	# Test control path operations specific to (S, G) entries.

	# Default filter mode.
	run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 grp $grp src $src permanent dst $vtep_ip src_vni 10010"
	run_cmd "bridge -n $ns1 -d -s mdb get dev vx0 grp $grp src $src src_vni 10010 | grep include"
	log_test $? 0 "(S, G) MDB entry default filter mode"

	run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 grp $grp src $src permanent dst $vtep_ip src_vni 10010"

	# Error cases.
	run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 grp $grp src $src permanent filter_mode include dst $vtep_ip src_vni 10010"
	log_test $? 255 "(S, G) with filter mode"

	run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 grp $grp src $src permanent source_list $src dst $vtep_ip src_vni 10010"
	log_test $? 255 "(S, G) with source list"

	run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 grp $grp src $grp permanent dst $vtep_ip src_vni 10010"
	log_test $? 255 "(S, G) with an invalid source list"

	run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 grp $all_zeros_grp src $src permanent dst $vtep_ip src_vni 10010"
	log_test $? 255 "All-zeros group with source"
}

sg_ipv4_ipv4()
{
	local ns1=$ns1_v4
	local grp=239.1.1.1
	local src=192.0.2.129
	local vtep_ip=198.51.100.100
	local all_zeros_grp=0.0.0.0

	echo
	echo "Control path: (S, G) operations - IPv4 overlay / IPv4 underlay"
	echo "--------------------------------------------------------------"

	sg_common $ns1 $grp $src $vtep_ip $all_zeros_grp
}

sg_ipv6_ipv4()
{
	local ns1=$ns1_v4
	local grp=ff0e::1
	local src=2001:db8:100::1
	local vtep_ip=198.51.100.100
	local all_zeros_grp=::

	echo
	echo "Control path: (S, G) operations - IPv6 overlay / IPv4 underlay"
	echo "--------------------------------------------------------------"

	sg_common $ns1 $grp $src $vtep_ip $all_zeros_grp
}

sg_ipv4_ipv6()
{
	local ns1=$ns1_v6
	local grp=239.1.1.1
	local src=192.0.2.129
	local vtep_ip=2001:db8:1000::1
	local all_zeros_grp=0.0.0.0

	echo
	echo "Control path: (S, G) operations - IPv4 overlay / IPv6 underlay"
	echo "--------------------------------------------------------------"

	sg_common $ns1 $grp $src $vtep_ip $all_zeros_grp
}

sg_ipv6_ipv6()
{
	local ns1=$ns1_v6
	local grp=ff0e::1
	local src=2001:db8:100::1
	local vtep_ip=2001:db8:1000::1
	local all_zeros_grp=::

	echo
	echo "Control path: (S, G) operations - IPv6 overlay / IPv6 underlay"
	echo "--------------------------------------------------------------"

	sg_common $ns1 $grp $src $vtep_ip $all_zeros_grp
}

ipv4_grps_get()
{
	local max_grps=$1; shift
	local i

	for i in $(seq 0 $((max_grps - 1))); do
		echo "239.1.1.$i"
	done
}

ipv6_grps_get()
{
	local max_grps=$1; shift
	local i

	for i in $(seq 0 $((max_grps - 1))); do
		echo "ff0e::$(printf %x $i)"
	done
}

dump_common()
{
	local ns1=$1; shift
	local local_addr=$1; shift
	local remote_prefix=$1; shift
	local fn=$1; shift
	local max_vxlan_devs=2
	local max_remotes=64
	local max_grps=256
	local num_entries
	local batch_file
	local grp
	local i j

	# The kernel maintains various markers for the MDB dump. Add a test for
	# large scale MDB dump to make sure that all the configured entries are
	# dumped and that the markers are used correctly.

	# Create net devices.
	for i in $(seq 1 $max_vxlan_devs); do
		ip -n $ns1 link add name vx-test${i} up type vxlan \
			local $local_addr dstport 4789 external vnifilter
	done

	# Create batch file with MDB entries.
	batch_file=$(mktemp)
	for i in $(seq 1 $max_vxlan_devs); do
		for j in $(seq 1 $max_remotes); do
			for grp in $($fn $max_grps); do
				echo "mdb add dev vx-test${i} port vx-test${i} grp $grp permanent dst ${remote_prefix}${j}" >> $batch_file
			done
		done
	done

	# Program the batch file and check for expected number of entries.
	bridge -n $ns1 -b $batch_file
	for i in $(seq 1 $max_vxlan_devs); do
		num_entries=$(bridge -n $ns1 mdb show dev vx-test${i} | grep "permanent" | wc -l)
		[[ $num_entries -eq $((max_grps * max_remotes)) ]]
		log_test $? 0 "Large scale dump - VXLAN device #$i"
	done

	rm -rf $batch_file
}

dump_ipv4_ipv4()
{
	local ns1=$ns1_v4
	local local_addr=192.0.2.1
	local remote_prefix=198.51.100.
	local fn=ipv4_grps_get

	echo
	echo "Control path: Large scale MDB dump - IPv4 overlay / IPv4 underlay"
	echo "-----------------------------------------------------------------"

	dump_common $ns1 $local_addr $remote_prefix $fn
}

dump_ipv6_ipv4()
{
	local ns1=$ns1_v4
	local local_addr=192.0.2.1
	local remote_prefix=198.51.100.
	local fn=ipv6_grps_get

	echo
	echo "Control path: Large scale MDB dump - IPv6 overlay / IPv4 underlay"
	echo "-----------------------------------------------------------------"

	dump_common $ns1 $local_addr $remote_prefix $fn
}

dump_ipv4_ipv6()
{
	local ns1=$ns1_v6
	local local_addr=2001:db8:1::1
	local remote_prefix=2001:db8:1000::
	local fn=ipv4_grps_get

	echo
	echo "Control path: Large scale MDB dump - IPv4 overlay / IPv6 underlay"
	echo "-----------------------------------------------------------------"

	dump_common $ns1 $local_addr $remote_prefix $fn
}

dump_ipv6_ipv6()
{
	local ns1=$ns1_v6
	local local_addr=2001:db8:1::1
	local remote_prefix=2001:db8:1000::
	local fn=ipv6_grps_get

	echo
	echo "Control path: Large scale MDB dump - IPv6 overlay / IPv6 underlay"
	echo "-----------------------------------------------------------------"

	dump_common $ns1 $local_addr $remote_prefix $fn
}

flush()
{
	local num_entries

	echo
	echo "Control path: Flush"
	echo "-------------------"

	# Add entries with different attributes and check that they are all
	# flushed when the flush command is given with no parameters.

	# Different source VNI.
	run_cmd "bridge -n $ns1_v4 mdb add dev vx0 port vx0 grp 239.1.1.1 permanent dst 198.51.100.1 src_vni 10010"
	run_cmd "bridge -n $ns1_v4 mdb add dev vx0 port vx0 grp 239.1.1.2 permanent dst 198.51.100.1 src_vni 10011"

	# Different routing protocol.
	run_cmd "bridge -n $ns1_v4 mdb add dev vx0 port vx0 grp 239.1.1.3 permanent proto bgp dst 198.51.100.1 src_vni 10010"
	run_cmd "bridge -n $ns1_v4 mdb add dev vx0 port vx0 grp 239.1.1.4 permanent proto zebra dst 198.51.100.1 src_vni 10010"

	# Different destination IP.
	run_cmd "bridge -n $ns1_v4 mdb add dev vx0 port vx0 grp 239.1.1.5 permanent dst 198.51.100.1 src_vni 10010"
	run_cmd "bridge -n $ns1_v4 mdb add dev vx0 port vx0 grp 239.1.1.6 permanent dst 198.51.100.2 src_vni 10010"

	# Different destination port.
	run_cmd "bridge -n $ns1_v4 mdb add dev vx0 port vx0 grp 239.1.1.7 permanent dst 198.51.100.1 dst_port 11111 src_vni 10010"
	run_cmd "bridge -n $ns1_v4 mdb add dev vx0 port vx0 grp 239.1.1.8 permanent dst 198.51.100.1 dst_port 22222 src_vni 10010"

	# Different VNI.
	run_cmd "bridge -n $ns1_v4 mdb add dev vx0 port vx0 grp 239.1.1.9 permanent dst 198.51.100.1 vni 10010 src_vni 10010"
	run_cmd "bridge -n $ns1_v4 mdb add dev vx0 port vx0 grp 239.1.1.10 permanent dst 198.51.100.1 vni 10020 src_vni 10010"

	run_cmd "bridge -n $ns1_v4 mdb flush dev vx0"
	num_entries=$(bridge -n $ns1_v4 mdb show dev vx0 | wc -l)
	[[ $num_entries -eq 0 ]]
	log_test $? 0 "Flush all"

	# Check that entries are flushed when port is specified as the VXLAN
	# device and that an error is returned when port is specified as a
	# different net device.

	run_cmd "bridge -n $ns1_v4 mdb add dev vx0 port vx0 grp 239.1.1.1 permanent dst 198.51.100.1 src_vni 10010"
	run_cmd "bridge -n $ns1_v4 mdb add dev vx0 port vx0 grp 239.1.1.1 permanent dst 198.51.100.2 src_vni 10010"

	run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 port vx0"
	run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010"
	log_test $? 254 "Flush by port - matching"

	run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 port veth0"
	log_test $? 255 "Flush by port - non-matching"

	# Check that when flushing by source VNI only entries programmed with
	# the specified source VNI are flushed and the rest are not.

	run_cmd "bridge -n $ns1_v4 mdb add dev vx0 port vx0 grp 239.1.1.1 permanent dst 198.51.100.1 src_vni 10010"
	run_cmd "bridge -n $ns1_v4 mdb add dev vx0 port vx0 grp 239.1.1.1 permanent dst 198.51.100.2 src_vni 10010"
	run_cmd "bridge -n $ns1_v4 mdb add dev vx0 port vx0 grp 239.1.1.1 permanent dst 198.51.100.1 src_vni 10011"
	run_cmd "bridge -n $ns1_v4 mdb add dev vx0 port vx0 grp 239.1.1.1 permanent dst 198.51.100.2 src_vni 10011"

	run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 src_vni 10010"

	run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010"
	log_test $? 254 "Flush by source VNI - matching"
	run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10011"
	log_test $? 0 "Flush by source VNI - non-matching"

	run_cmd "bridge -n $ns1_v4 mdb flush dev vx0"

	# Check that all entries are flushed when "permanent" is specified and
	# that an error is returned when "nopermanent" is specified.

	run_cmd "bridge -n $ns1_v4 mdb add dev vx0 port vx0 grp 239.1.1.1 permanent dst 198.51.100.1 src_vni 10010"
	run_cmd "bridge -n $ns1_v4 mdb add dev vx0 port vx0 grp 239.1.1.1 permanent dst 198.51.100.2 src_vni 10010"

	run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 permanent"
	run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010"
	log_test $? 254 "Flush by \"permanent\" state"

	run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 nopermanent"
	log_test $? 255 "Flush by \"nopermanent\" state"

	# Check that when flushing by routing protocol only entries programmed
	# with the specified routing protocol are flushed and the rest are not.

	run_cmd "bridge -n $ns1_v4 mdb add dev vx0 port vx0 grp 239.1.1.1 permanent proto bgp dst 198.51.100.1 src_vni 10010"
	run_cmd "bridge -n $ns1_v4 mdb add dev vx0 port vx0 grp 239.1.1.1 permanent proto zebra dst 198.51.100.2 src_vni 10010"

	run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 proto bgp"

	run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep \"proto bgp\""
	log_test $? 1 "Flush by routing protocol - matching"
	run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep \"proto zebra\""
	log_test $? 0 "Flush by routing protocol - non-matching"

	run_cmd "bridge -n $ns1_v4 mdb flush dev vx0"

	# Check that when flushing by destination IP only entries programmed
	# with the specified destination IP are flushed and the rest are not.

	# IPv4.

	run_cmd "bridge -n $ns1_v4 mdb add dev vx0 port vx0 grp 239.1.1.1 permanent dst 198.51.100.1 src_vni 10010"
	run_cmd "bridge -n $ns1_v4 mdb add dev vx0 port vx0 grp 239.1.1.1 permanent dst 198.51.100.2 src_vni 10010"

	run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 dst 198.51.100.2"

	run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep 198.51.100.2"
	log_test $? 1 "Flush by IPv4 destination IP - matching"
	run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep 198.51.100.1"
	log_test $? 0 "Flush by IPv4 destination IP - non-matching"

	run_cmd "bridge -n $ns1_v4 mdb flush dev vx0"

	# IPv6.

	run_cmd "bridge -n $ns1_v4 mdb add dev vx0 port vx0 grp 239.1.1.1 permanent dst 2001:db8:1000::1 src_vni 10010"
	run_cmd "bridge -n $ns1_v4 mdb add dev vx0 port vx0 grp 239.1.1.1 permanent dst 2001:db8:1000::2 src_vni 10010"

	run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 dst 2001:db8:1000::2"

	run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep 2001:db8:1000::2"
	log_test $? 1 "Flush by IPv6 destination IP - matching"
	run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep 2001:db8:1000::1"
	log_test $? 0 "Flush by IPv6 destination IP - non-matching"

	run_cmd "bridge -n $ns1_v4 mdb flush dev vx0"

	# Check that when flushing by UDP destination port only entries
	# programmed with the specified port are flushed and the rest are not.

	run_cmd "bridge -n $ns1_v4 mdb add dev vx0 port vx0 grp 239.1.1.1 permanent dst_port 11111 dst 198.51.100.1 src_vni 10010"
	run_cmd "bridge -n $ns1_v4 mdb add dev vx0 port vx0 grp 239.1.1.1 permanent dst_port 22222 dst 198.51.100.2 src_vni 10010"

	run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 dst_port 11111"

	run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep \"dst_port 11111\""
	log_test $? 1 "Flush by UDP destination port - matching"
	run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep \"dst_port 22222\""
	log_test $? 0 "Flush by UDP destination port - non-matching"

	run_cmd "bridge -n $ns1_v4 mdb flush dev vx0"

	# When not specifying a UDP destination port for an entry, traffic is
	# encapsulated with the device's UDP destination port. Check that when
	# flushing by the device's UDP destination port only entries programmed
	# with this port are flushed and the rest are not.

	run_cmd "bridge -n $ns1_v4 mdb add dev vx0 port vx0 grp 239.1.1.1 permanent dst 198.51.100.1 src_vni 10010"
	run_cmd "bridge -n $ns1_v4 mdb add dev vx0 port vx0 grp 239.1.1.1 permanent dst_port 22222 dst 198.51.100.2 src_vni 10010"

	run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 dst_port 4789"

	run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep 198.51.100.1"
	log_test $? 1 "Flush by device's UDP destination port - matching"
	run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep 198.51.100.2"
	log_test $? 0 "Flush by device's UDP destination port - non-matching"

	run_cmd "bridge -n $ns1_v4 mdb flush dev vx0"

	# Check that when flushing by destination VNI only entries programmed
	# with the specified destination VNI are flushed and the rest are not.

	run_cmd "bridge -n $ns1_v4 mdb add dev vx0 port vx0 grp 239.1.1.1 permanent vni 20010 dst 198.51.100.1 src_vni 10010"
	run_cmd "bridge -n $ns1_v4 mdb add dev vx0 port vx0 grp 239.1.1.1 permanent vni 20011 dst 198.51.100.2 src_vni 10010"

	run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 vni 20010"

	run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep \" vni 20010\""
	log_test $? 1 "Flush by destination VNI - matching"
	run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep \" vni 20011\""
	log_test $? 0 "Flush by destination VNI - non-matching"

	run_cmd "bridge -n $ns1_v4 mdb flush dev vx0"

	# When not specifying a destination VNI for an entry, traffic is
	# encapsulated with the source VNI. Check that when flushing by a
	# destination VNI that is equal to the source VNI only such entries are
	# flushed and the rest are not.

	run_cmd "bridge -n $ns1_v4 mdb add dev vx0 port vx0 grp 239.1.1.1 permanent dst 198.51.100.1 src_vni 10010"
	run_cmd "bridge -n $ns1_v4 mdb add dev vx0 port vx0 grp 239.1.1.1 permanent vni 20010 dst 198.51.100.2 src_vni 10010"

	run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 vni 10010"

	run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep 198.51.100.1"
	log_test $? 1 "Flush by destination VNI equal to source VNI - matching"
	run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep 198.51.100.2"
	log_test $? 0 "Flush by destination VNI equal to source VNI - non-matching"

	run_cmd "bridge -n $ns1_v4 mdb flush dev vx0"

	# Test that an error is returned when trying to flush using VLAN ID.

	run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 vid 10"
	log_test $? 255 "Flush by VLAN ID"
}

################################################################################
# Tests - Data path

encap_params_common()
{
	local ns1=$1; shift
	local ns2=$1; shift
	local vtep1_ip=$1; shift
	local vtep2_ip=$1; shift
	local plen=$1; shift
	local enc_ethtype=$1; shift
	local grp=$1; shift
	local grp_dmac=$1; shift
	local src=$1; shift
	local mz=$1; shift

	# Test that packets forwarded by the VXLAN MDB are encapsulated with
	# the correct parameters. Transmit packets from the first namespace and
	# check that they hit the corresponding filters on the ingress of the
	# second namespace.

	run_cmd "tc -n $ns2 qdisc replace dev veth0 clsact"
	run_cmd "tc -n $ns2 qdisc replace dev vx0 clsact"
	run_cmd "ip -n $ns2 address replace $vtep1_ip/$plen dev lo"
	run_cmd "ip -n $ns2 address replace $vtep2_ip/$plen dev lo"

	# Check destination IP.
	run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent dst $vtep1_ip src_vni 10010"
	run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent dst $vtep2_ip src_vni 10020"

	run_cmd "tc -n $ns2 filter replace dev vx0 ingress pref 1 handle 101 proto all flower enc_dst_ip $vtep1_ip action pass"
	run_cmd "ip netns exec $ns1 $mz br0.10 -a own -b $grp_dmac -A $src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
	tc_check_packets "$ns2" "dev vx0 ingress" 101 1
	log_test $? 0 "Destination IP - match"

	run_cmd "ip netns exec $ns1 $mz br0.20 -a own -b $grp_dmac -A $src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
	tc_check_packets "$ns2" "dev vx0 ingress" 101 1
	log_test $? 0 "Destination IP - no match"

	run_cmd "tc -n $ns2 filter del dev vx0 ingress pref 1 handle 101 flower"
	run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 grp $grp dst $vtep2_ip src_vni 10020"
	run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 grp $grp dst $vtep1_ip src_vni 10010"

	# Check destination port.
	run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent dst $vtep1_ip src_vni 10010"
	run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent dst $vtep1_ip dst_port 1111 src_vni 10020"

	run_cmd "tc -n $ns2 filter replace dev veth0 ingress pref 1 handle 101 proto $enc_ethtype flower ip_proto udp dst_port 4789 action pass"
	run_cmd "ip netns exec $ns1 $mz br0.10 -a own -b $grp_dmac -A $src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
	tc_check_packets "$ns2" "dev veth0 ingress" 101 1
	log_test $? 0 "Default destination port - match"

	run_cmd "ip netns exec $ns1 $mz br0.20 -a own -b $grp_dmac -A $src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
	tc_check_packets "$ns2" "dev veth0 ingress" 101 1
	log_test $? 0 "Default destination port - no match"

	run_cmd "tc -n $ns2 filter replace dev veth0 ingress pref 1 handle 101 proto $enc_ethtype flower ip_proto udp dst_port 1111 action pass"
	run_cmd "ip netns exec $ns1 $mz br0.20 -a own -b $grp_dmac -A $src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
	tc_check_packets "$ns2" "dev veth0 ingress" 101 1
	log_test $? 0 "Non-default destination port - match"

	run_cmd "ip netns exec $ns1 $mz br0.10 -a own -b $grp_dmac -A $src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
	tc_check_packets "$ns2" "dev veth0 ingress" 101 1
	log_test $? 0 "Non-default destination port - no match"

	run_cmd "tc -n $ns2 filter del dev veth0 ingress pref 1 handle 101 flower"
	run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 grp $grp dst $vtep1_ip src_vni 10020"
	run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 grp $grp dst $vtep1_ip src_vni 10010"

	# Check default VNI.
	run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent dst $vtep1_ip src_vni 10010"
	run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent dst $vtep1_ip src_vni 10020"

	run_cmd "tc -n $ns2 filter replace dev vx0 ingress pref 1 handle 101 proto all flower enc_key_id 10010 action pass"
	run_cmd "ip netns exec $ns1 $mz br0.10 -a own -b $grp_dmac -A $src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
	tc_check_packets "$ns2" "dev vx0 ingress" 101 1
	log_test $? 0 "Default destination VNI - match"

	run_cmd "ip netns exec $ns1 $mz br0.20 -a own -b $grp_dmac -A $src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
	tc_check_packets "$ns2" "dev vx0 ingress" 101 1
	log_test $? 0 "Default destination VNI - no match"

	run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent dst $vtep1_ip vni 10020 src_vni 10010"
	run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent dst $vtep1_ip vni 10010 src_vni 10020"

	run_cmd "tc -n $ns2 filter replace dev vx0 ingress pref 1 handle 101 proto all flower enc_key_id 10020 action pass"
	run_cmd "ip netns exec $ns1 $mz br0.10 -a own -b $grp_dmac -A $src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
	tc_check_packets "$ns2" "dev vx0 ingress" 101 1
	log_test $? 0 "Non-default destination VNI - match"

	run_cmd "ip netns exec $ns1 $mz br0.20 -a own -b $grp_dmac -A $src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
	tc_check_packets "$ns2" "dev vx0 ingress" 101 1
	log_test $? 0 "Non-default destination VNI - no match"

	run_cmd "tc -n $ns2 filter del dev vx0 ingress pref 1 handle 101 flower"
	run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 grp $grp dst $vtep1_ip src_vni 10020"
	run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 grp $grp dst $vtep1_ip src_vni 10010"
}

encap_params_ipv4_ipv4()
{
	local ns1=$ns1_v4
	local ns2=$ns2_v4
	local vtep1_ip=198.51.100.100
	local vtep2_ip=198.51.100.200
	local plen=32
	local enc_ethtype="ip"
	local grp=239.1.1.1
	local grp_dmac=01:00:5e:01:01:01
	local src=192.0.2.129

	echo
	echo "Data path: Encapsulation parameters - IPv4 overlay / IPv4 underlay"
	echo "------------------------------------------------------------------"

	encap_params_common $ns1 $ns2 $vtep1_ip $vtep2_ip $plen $enc_ethtype \
		$grp $grp_dmac $src "mausezahn"
}

encap_params_ipv6_ipv4()
{
	local ns1=$ns1_v4
	local ns2=$ns2_v4
	local vtep1_ip=198.51.100.100
	local vtep2_ip=198.51.100.200
	local plen=32
	local enc_ethtype="ip"
	local grp=ff0e::1
	local grp_dmac=33:33:00:00:00:01
	local src=2001:db8:100::1

	echo
	echo "Data path: Encapsulation parameters - IPv6 overlay / IPv4 underlay"
	echo "------------------------------------------------------------------"

	encap_params_common $ns1 $ns2 $vtep1_ip $vtep2_ip $plen $enc_ethtype \
		$grp $grp_dmac $src "mausezahn -6"
}

encap_params_ipv4_ipv6()
{
	local ns1=$ns1_v6
	local ns2=$ns2_v6
	local vtep1_ip=2001:db8:1000::1
	local vtep2_ip=2001:db8:2000::1
	local plen=128
	local enc_ethtype="ipv6"
	local grp=239.1.1.1
	local grp_dmac=01:00:5e:01:01:01
	local src=192.0.2.129

	echo
	echo "Data path: Encapsulation parameters - IPv4 overlay / IPv6 underlay"
	echo "------------------------------------------------------------------"

	encap_params_common $ns1 $ns2 $vtep1_ip $vtep2_ip $plen $enc_ethtype \
		$grp $grp_dmac $src "mausezahn"
}

encap_params_ipv6_ipv6()
{
	local ns1=$ns1_v6
	local ns2=$ns2_v6
	local vtep1_ip=2001:db8:1000::1
	local vtep2_ip=2001:db8:2000::1
	local plen=128
	local enc_ethtype="ipv6"
	local grp=ff0e::1
	local grp_dmac=33:33:00:00:00:01
	local src=2001:db8:100::1

	echo
	echo "Data path: Encapsulation parameters - IPv6 overlay / IPv6 underlay"
	echo "------------------------------------------------------------------"

	encap_params_common $ns1 $ns2 $vtep1_ip $vtep2_ip $plen $enc_ethtype \
		$grp $grp_dmac $src "mausezahn -6"
}

starg_exclude_ir_common()
{
	local ns1=$1; shift
	local ns2=$1; shift
	local vtep1_ip=$1; shift
	local vtep2_ip=$1; shift
	local plen=$1; shift
	local grp=$1; shift
	local grp_dmac=$1; shift
	local valid_src=$1; shift
	local invalid_src=$1; shift
	local mz=$1; shift

	# Install a (*, G) EXCLUDE MDB entry with one source and two remote
	# VTEPs. Make sure that the source in the source list is not forwarded
	# and that a source not in the list is forwarded. Remove one of the
	# VTEPs from the entry and make sure that packets are only forwarded to
	# the remaining VTEP.

	run_cmd "tc -n $ns2 qdisc replace dev vx0 clsact"
	run_cmd "ip -n $ns2 address replace $vtep1_ip/$plen dev lo"
	run_cmd "ip -n $ns2 address replace $vtep2_ip/$plen dev lo"

	run_cmd "tc -n $ns2 filter replace dev vx0 ingress pref 1 handle 101 proto all flower enc_dst_ip $vtep1_ip action pass"
	run_cmd "tc -n $ns2 filter replace dev vx0 ingress pref 1 handle 102 proto all flower enc_dst_ip $vtep2_ip action pass"

	run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent filter_mode exclude source_list $invalid_src dst $vtep1_ip src_vni 10010"
	run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent filter_mode exclude source_list $invalid_src dst $vtep2_ip src_vni 10010"

	# Check that invalid source is not forwarded to any VTEP.
	run_cmd "ip netns exec $ns1 $mz br0.10 -a own -b $grp_dmac -A $invalid_src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
	tc_check_packets "$ns2" "dev vx0 ingress" 101 0
	log_test $? 0 "Block excluded source - first VTEP"
	tc_check_packets "$ns2" "dev vx0 ingress" 102 0
	log_test $? 0 "Block excluded source - second VTEP"

	# Check that valid source is forwarded to both VTEPs.
	run_cmd "ip netns exec $ns1 $mz br0.10 -a own -b $grp_dmac -A $valid_src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
	tc_check_packets "$ns2" "dev vx0 ingress" 101 1
	log_test $? 0 "Forward valid source - first VTEP"
	tc_check_packets "$ns2" "dev vx0 ingress" 102 1
	log_test $? 0 "Forward valid source - second VTEP"

	# Remove second VTEP.
	run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 grp $grp dst $vtep2_ip src_vni 10010"

	# Check that invalid source is not forwarded to any VTEP.
	run_cmd "ip netns exec $ns1 $mz br0.10 -a own -b $grp_dmac -A $invalid_src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
	tc_check_packets "$ns2" "dev vx0 ingress" 101 1
	log_test $? 0 "Block excluded source after removal - first VTEP"
	tc_check_packets "$ns2" "dev vx0 ingress" 102 1
	log_test $? 0 "Block excluded source after removal - second VTEP"

	# Check that valid source is forwarded to the remaining VTEP.
	run_cmd "ip netns exec $ns1 $mz br0.10 -a own -b $grp_dmac -A $valid_src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
	tc_check_packets "$ns2" "dev vx0 ingress" 101 2
	log_test $? 0 "Forward valid source after removal - first VTEP"
	tc_check_packets "$ns2" "dev vx0 ingress" 102 1
	log_test $? 0 "Forward valid source after removal - second VTEP"
}

starg_exclude_ir_ipv4_ipv4()
{
	local ns1=$ns1_v4
	local ns2=$ns2_v4
	local vtep1_ip=198.51.100.100
	local vtep2_ip=198.51.100.200
	local plen=32
	local grp=239.1.1.1
	local grp_dmac=01:00:5e:01:01:01
	local valid_src=192.0.2.129
	local invalid_src=192.0.2.145

	echo
	echo "Data path: (*, G) EXCLUDE - IR - IPv4 overlay / IPv4 underlay"
	echo "-------------------------------------------------------------"

	starg_exclude_ir_common $ns1 $ns2 $vtep1_ip $vtep2_ip $plen $grp \
		$grp_dmac $valid_src $invalid_src "mausezahn"
}

starg_exclude_ir_ipv6_ipv4()
{
	local ns1=$ns1_v4
	local ns2=$ns2_v4
	local vtep1_ip=198.51.100.100
	local vtep2_ip=198.51.100.200
	local plen=32
	local grp=ff0e::1
	local grp_dmac=33:33:00:00:00:01
	local valid_src=2001:db8:100::1
	local invalid_src=2001:db8:200::1

	echo
	echo "Data path: (*, G) EXCLUDE - IR - IPv6 overlay / IPv4 underlay"
	echo "-------------------------------------------------------------"

	starg_exclude_ir_common $ns1 $ns2 $vtep1_ip $vtep2_ip $plen $grp \
		$grp_dmac $valid_src $invalid_src "mausezahn -6"
}

starg_exclude_ir_ipv4_ipv6()
{
	local ns1=$ns1_v6
	local ns2=$ns2_v6
	local vtep1_ip=2001:db8:1000::1
	local vtep2_ip=2001:db8:2000::1
	local plen=128
	local grp=239.1.1.1
	local grp_dmac=01:00:5e:01:01:01
	local valid_src=192.0.2.129
	local invalid_src=192.0.2.145

	echo
	echo "Data path: (*, G) EXCLUDE - IR - IPv4 overlay / IPv6 underlay"
	echo "-------------------------------------------------------------"

	starg_exclude_ir_common $ns1 $ns2 $vtep1_ip $vtep2_ip $plen $grp \
		$grp_dmac $valid_src $invalid_src "mausezahn"
}

starg_exclude_ir_ipv6_ipv6()
{
	local ns1=$ns1_v6
	local ns2=$ns2_v6
	local vtep1_ip=2001:db8:1000::1
	local vtep2_ip=2001:db8:2000::1
	local plen=128
	local grp=ff0e::1
	local grp_dmac=33:33:00:00:00:01
	local valid_src=2001:db8:100::1
	local invalid_src=2001:db8:200::1

	echo
	echo "Data path: (*, G) EXCLUDE - IR - IPv6 overlay / IPv6 underlay"
	echo "-------------------------------------------------------------"

	starg_exclude_ir_common $ns1 $ns2 $vtep1_ip $vtep2_ip $plen $grp \
		$grp_dmac $valid_src $invalid_src "mausezahn -6"
}

starg_include_ir_common()
{
	local ns1=$1; shift
	local ns2=$1; shift
	local vtep1_ip=$1; shift
	local vtep2_ip=$1; shift
	local plen=$1; shift
	local grp=$1; shift
	local grp_dmac=$1; shift
	local valid_src=$1; shift
	local invalid_src=$1; shift
	local mz=$1; shift

	# Install a (*, G) INCLUDE MDB entry with one source and two remote
	# VTEPs. Make sure that the source in the source list is forwarded and
	# that a source not in the list is not forwarded. Remove one of the
	# VTEPs from the entry and make sure that packets are only forwarded to
	# the remaining VTEP.

	run_cmd "tc -n $ns2 qdisc replace dev vx0 clsact"
	run_cmd "ip -n $ns2 address replace $vtep1_ip/$plen dev lo"
	run_cmd "ip -n $ns2 address replace $vtep2_ip/$plen dev lo"

	run_cmd "tc -n $ns2 filter replace dev vx0 ingress pref 1 handle 101 proto all flower enc_dst_ip $vtep1_ip action pass"
	run_cmd "tc -n $ns2 filter replace dev vx0 ingress pref 1 handle 102 proto all flower enc_dst_ip $vtep2_ip action pass"

	run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent filter_mode include source_list $valid_src dst $vtep1_ip src_vni 10010"
	run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent filter_mode include source_list $valid_src dst $vtep2_ip src_vni 10010"

	# Check that invalid source is not forwarded to any VTEP.
	run_cmd "ip netns exec $ns1 $mz br0.10 -a own -b $grp_dmac -A $invalid_src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
	tc_check_packets "$ns2" "dev vx0 ingress" 101 0
	log_test $? 0 "Block excluded source - first VTEP"
	tc_check_packets "$ns2" "dev vx0 ingress" 102 0
	log_test $? 0 "Block excluded source - second VTEP"

	# Check that valid source is forwarded to both VTEPs.
	run_cmd "ip netns exec $ns1 $mz br0.10 -a own -b $grp_dmac -A $valid_src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
	tc_check_packets "$ns2" "dev vx0 ingress" 101 1
	log_test $? 0 "Forward valid source - first VTEP"
	tc_check_packets "$ns2" "dev vx0 ingress" 102 1
	log_test $? 0 "Forward valid source - second VTEP"

	# Remove second VTEP.
	run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 grp $grp dst $vtep2_ip src_vni 10010"

	# Check that invalid source is not forwarded to any VTEP.
	run_cmd "ip netns exec $ns1 $mz br0.10 -a own -b $grp_dmac -A $invalid_src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
	tc_check_packets "$ns2" "dev vx0 ingress" 101 1
	log_test $? 0 "Block excluded source after removal - first VTEP"
	tc_check_packets "$ns2" "dev vx0 ingress" 102 1
	log_test $? 0 "Block excluded source after removal - second VTEP"

	# Check that valid source is forwarded to the remaining VTEP.
	run_cmd "ip netns exec $ns1 $mz br0.10 -a own -b $grp_dmac -A $valid_src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
	tc_check_packets "$ns2" "dev vx0 ingress" 101 2
	log_test $? 0 "Forward valid source after removal - first VTEP"
	tc_check_packets "$ns2" "dev vx0 ingress" 102 1
	log_test $? 0 "Forward valid source after removal - second VTEP"
}

starg_include_ir_ipv4_ipv4()
{
	local ns1=$ns1_v4
	local ns2=$ns2_v4
	local vtep1_ip=198.51.100.100
	local vtep2_ip=198.51.100.200
	local plen=32
	local grp=239.1.1.1
	local grp_dmac=01:00:5e:01:01:01
	local valid_src=192.0.2.129
	local invalid_src=192.0.2.145

	echo
	echo "Data path: (*, G) INCLUDE - IR - IPv4 overlay / IPv4 underlay"
	echo "-------------------------------------------------------------"

	starg_include_ir_common $ns1 $ns2 $vtep1_ip $vtep2_ip $plen $grp \
		$grp_dmac $valid_src $invalid_src "mausezahn"
}

starg_include_ir_ipv6_ipv4()
{
	local ns1=$ns1_v4
	local ns2=$ns2_v4
	local vtep1_ip=198.51.100.100
	local vtep2_ip=198.51.100.200
	local plen=32
	local grp=ff0e::1
	local grp_dmac=33:33:00:00:00:01
	local valid_src=2001:db8:100::1
	local invalid_src=2001:db8:200::1

	echo
	echo "Data path: (*, G) INCLUDE - IR - IPv6 overlay / IPv4 underlay"
	echo "-------------------------------------------------------------"

	starg_include_ir_common $ns1 $ns2 $vtep1_ip $vtep2_ip $plen $grp \
		$grp_dmac $valid_src $invalid_src "mausezahn -6"
}

starg_include_ir_ipv4_ipv6()
{
	local ns1=$ns1_v6
	local ns2=$ns2_v6
	local vtep1_ip=2001:db8:1000::1
	local vtep2_ip=2001:db8:2000::1
	local plen=128
	local grp=239.1.1.1
	local grp_dmac=01:00:5e:01:01:01
	local valid_src=192.0.2.129
	local invalid_src=192.0.2.145

	echo
	echo "Data path: (*, G) INCLUDE - IR - IPv4 overlay / IPv6 underlay"
	echo "-------------------------------------------------------------"

	starg_include_ir_common $ns1 $ns2 $vtep1_ip $vtep2_ip $plen $grp \
		$grp_dmac $valid_src $invalid_src "mausezahn"
}

starg_include_ir_ipv6_ipv6()
{
	local ns1=$ns1_v6
	local ns2=$ns2_v6
	local vtep1_ip=2001:db8:1000::1
	local vtep2_ip=2001:db8:2000::1
	local plen=128
	local grp=ff0e::1
	local grp_dmac=33:33:00:00:00:01
	local valid_src=2001:db8:100::1
	local invalid_src=2001:db8:200::1

	echo
	echo "Data path: (*, G) INCLUDE - IR - IPv6 overlay / IPv6 underlay"
	echo "-------------------------------------------------------------"

	starg_include_ir_common $ns1 $ns2 $vtep1_ip $vtep2_ip $plen $grp \
		$grp_dmac $valid_src $invalid_src "mausezahn -6"
}

starg_exclude_p2mp_common()
{
	local ns1=$1; shift
	local ns2=$1; shift
	local mcast_grp=$1; shift
	local plen=$1; shift
	local grp=$1; shift
	local grp_dmac=$1; shift
	local valid_src=$1; shift
	local invalid_src=$1; shift
	local mz=$1; shift

	# Install a (*, G) EXCLUDE MDB entry with one source and one multicast
	# group to which packets are sent. Make sure that the source in the
	# source list is not forwarded and that a source not in the list is
	# forwarded.

	run_cmd "tc -n $ns2 qdisc replace dev vx0 clsact"
	run_cmd "ip -n $ns2 address replace $mcast_grp/$plen dev veth0 autojoin"

	run_cmd "tc -n $ns2 filter replace dev vx0 ingress pref 1 handle 101 proto all flower enc_dst_ip $mcast_grp action pass"

	run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent filter_mode exclude source_list $invalid_src dst $mcast_grp src_vni 10010 via veth0"

	# Check that invalid source is not forwarded.
	run_cmd "ip netns exec $ns1 $mz br0.10 -a own -b $grp_dmac -A $invalid_src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
	tc_check_packets "$ns2" "dev vx0 ingress" 101 0
	log_test $? 0 "Block excluded source"

	# Check that valid source is forwarded.
	run_cmd "ip netns exec $ns1 $mz br0.10 -a own -b $grp_dmac -A $valid_src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
	tc_check_packets "$ns2" "dev vx0 ingress" 101 1
	log_test $? 0 "Forward valid source"

	# Remove the VTEP from the multicast group.
	run_cmd "ip -n $ns2 address del $mcast_grp/$plen dev veth0"

	# Check that valid source is not received anymore.
	run_cmd "ip netns exec $ns1 $mz br0.10 -a own -b $grp_dmac -A $valid_src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
	tc_check_packets "$ns2" "dev vx0 ingress" 101 1
	log_test $? 0 "Receive of valid source after removal from group"
}

starg_exclude_p2mp_ipv4_ipv4()
{
	local ns1=$ns1_v4
	local ns2=$ns2_v4
	local mcast_grp=238.1.1.1
	local plen=32
	local grp=239.1.1.1
	local grp_dmac=01:00:5e:01:01:01
	local valid_src=192.0.2.129
	local invalid_src=192.0.2.145

	echo
	echo "Data path: (*, G) EXCLUDE - P2MP - IPv4 overlay / IPv4 underlay"
	echo "---------------------------------------------------------------"

	starg_exclude_p2mp_common $ns1 $ns2 $mcast_grp $plen $grp $grp_dmac \
		$valid_src $invalid_src "mausezahn"
}

starg_exclude_p2mp_ipv6_ipv4()
{
	local ns1=$ns1_v4
	local ns2=$ns2_v4
	local mcast_grp=238.1.1.1
	local plen=32
	local grp=ff0e::1
	local grp_dmac=33:33:00:00:00:01
	local valid_src=2001:db8:100::1
	local invalid_src=2001:db8:200::1

	echo
	echo "Data path: (*, G) EXCLUDE - P2MP - IPv6 overlay / IPv4 underlay"
	echo "---------------------------------------------------------------"

	starg_exclude_p2mp_common $ns1 $ns2 $mcast_grp $plen $grp $grp_dmac \
		$valid_src $invalid_src "mausezahn -6"
}

starg_exclude_p2mp_ipv4_ipv6()
{
	local ns1=$ns1_v6
	local ns2=$ns2_v6
	local mcast_grp=ff0e::2
	local plen=128
	local grp=239.1.1.1
	local grp_dmac=01:00:5e:01:01:01
	local valid_src=192.0.2.129
	local invalid_src=192.0.2.145

	echo
	echo "Data path: (*, G) EXCLUDE - P2MP - IPv4 overlay / IPv6 underlay"
	echo "---------------------------------------------------------------"

	starg_exclude_p2mp_common $ns1 $ns2 $mcast_grp $plen $grp $grp_dmac \
		$valid_src $invalid_src "mausezahn"
}

starg_exclude_p2mp_ipv6_ipv6()
{
	local ns1=$ns1_v6
	local ns2=$ns2_v6
	local mcast_grp=ff0e::2
	local plen=128
	local grp=ff0e::1
	local grp_dmac=33:33:00:00:00:01
	local valid_src=2001:db8:100::1
	local invalid_src=2001:db8:200::1

	echo
	echo "Data path: (*, G) EXCLUDE - P2MP - IPv6 overlay / IPv6 underlay"
	echo "---------------------------------------------------------------"

	starg_exclude_p2mp_common $ns1 $ns2 $mcast_grp $plen $grp $grp_dmac \
		$valid_src $invalid_src "mausezahn -6"
}

starg_include_p2mp_common()
{
	local ns1=$1; shift
	local ns2=$1; shift
	local mcast_grp=$1; shift
	local plen=$1; shift
	local grp=$1; shift
	local grp_dmac=$1; shift
	local valid_src=$1; shift
	local invalid_src=$1; shift
	local mz=$1; shift

	# Install a (*, G) INCLUDE MDB entry with one source and one multicast
	# group to which packets are sent. Make sure that the source in the
	# source list is forwarded and that a source not in the list is not
	# forwarded.

	run_cmd "tc -n $ns2 qdisc replace dev vx0 clsact"
	run_cmd "ip -n $ns2 address replace $mcast_grp/$plen dev veth0 autojoin"

	run_cmd "tc -n $ns2 filter replace dev vx0 ingress pref 1 handle 101 proto all flower enc_dst_ip $mcast_grp action pass"

	run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent filter_mode include source_list $valid_src dst $mcast_grp src_vni 10010 via veth0"

	# Check that invalid source is not forwarded.
	run_cmd "ip netns exec $ns1 $mz br0.10 -a own -b $grp_dmac -A $invalid_src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
	tc_check_packets "$ns2" "dev vx0 ingress" 101 0
	log_test $? 0 "Block excluded source"

	# Check that valid source is forwarded.
	run_cmd "ip netns exec $ns1 $mz br0.10 -a own -b $grp_dmac -A $valid_src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
	tc_check_packets "$ns2" "dev vx0 ingress" 101 1
	log_test $? 0 "Forward valid source"

	# Remove the VTEP from the multicast group.
	run_cmd "ip -n $ns2 address del $mcast_grp/$plen dev veth0"

	# Check that valid source is not received anymore.
	run_cmd "ip netns exec $ns1 $mz br0.10 -a own -b $grp_dmac -A $valid_src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
	tc_check_packets "$ns2" "dev vx0 ingress" 101 1
	log_test $? 0 "Receive of valid source after removal from group"
}

starg_include_p2mp_ipv4_ipv4()
{
	local ns1=$ns1_v4
	local ns2=$ns2_v4
	local mcast_grp=238.1.1.1
	local plen=32
	local grp=239.1.1.1
	local grp_dmac=01:00:5e:01:01:01
	local valid_src=192.0.2.129
	local invalid_src=192.0.2.145

	echo
	echo "Data path: (*, G) INCLUDE - P2MP - IPv4 overlay / IPv4 underlay"
	echo "---------------------------------------------------------------"

	starg_include_p2mp_common $ns1 $ns2 $mcast_grp $plen $grp $grp_dmac \
		$valid_src $invalid_src "mausezahn"
}

starg_include_p2mp_ipv6_ipv4()
{
	local ns1=$ns1_v4
	local ns2=$ns2_v4
	local mcast_grp=238.1.1.1
	local plen=32
	local grp=ff0e::1
	local grp_dmac=33:33:00:00:00:01
	local valid_src=2001:db8:100::1
	local invalid_src=2001:db8:200::1

	echo
	echo "Data path: (*, G) INCLUDE - P2MP - IPv6 overlay / IPv4 underlay"
	echo "---------------------------------------------------------------"

	starg_include_p2mp_common $ns1 $ns2 $mcast_grp $plen $grp $grp_dmac \
		$valid_src $invalid_src "mausezahn -6"
}

starg_include_p2mp_ipv4_ipv6()
{
	local ns1=$ns1_v6
	local ns2=$ns2_v6
	local mcast_grp=ff0e::2
	local plen=128
	local grp=239.1.1.1
	local grp_dmac=01:00:5e:01:01:01
	local valid_src=192.0.2.129
	local invalid_src=192.0.2.145

	echo
	echo "Data path: (*, G) INCLUDE - P2MP - IPv4 overlay / IPv6 underlay"
	echo "---------------------------------------------------------------"

	starg_include_p2mp_common $ns1 $ns2 $mcast_grp $plen $grp $grp_dmac \
		$valid_src $invalid_src "mausezahn"
}

starg_include_p2mp_ipv6_ipv6()
{
	local ns1=$ns1_v6
	local ns2=$ns2_v6
	local mcast_grp=ff0e::2
	local plen=128
	local grp=ff0e::1
	local grp_dmac=33:33:00:00:00:01
	local valid_src=2001:db8:100::1
	local invalid_src=2001:db8:200::1

	echo
	echo "Data path: (*, G) INCLUDE - P2MP - IPv6 overlay / IPv6 underlay"
	echo "---------------------------------------------------------------"

	starg_include_p2mp_common $ns1 $ns2 $mcast_grp $plen $grp $grp_dmac \
		$valid_src $invalid_src "mausezahn -6"
}

egress_vni_translation_common()
{
	local ns1=$1; shift
	local ns2=$1; shift
	local mcast_grp=$1; shift
	local plen=$1; shift
	local proto=$1; shift
	local grp=$1; shift
	local grp_dmac=$1; shift
	local src=$1; shift
	local mz=$1; shift

	# When P2MP tunnels are used with optimized inter-subnet multicast
	# (OISM) [1], the ingress VTEP does not perform VNI translation and
	# uses the VNI of the source broadcast domain (BD). If the egress VTEP
	# is a member in the source BD, then no VNI translation is needed.
	# Otherwise, the egress VTEP needs to translate the VNI to the
	# supplementary broadcast domain (SBD) VNI, which is usually the L3VNI.
	#
	# In this test, remove the VTEP in the second namespace from VLAN 10
	# (VNI 10010) and make sure that a packet sent from this VLAN on the
	# first VTEP is received by the SVI corresponding to the L3VNI (14000 /
	# VLAN 4000) on the second VTEP.
	#
	# The second VTEP will be able to decapsulate the packet with VNI 10010
	# because this VNI is configured on its shared VXLAN device. Later,
	# when ingressing the bridge, the VNI to VLAN lookup will fail because
	# the VTEP is not a member in VLAN 10, which will cause the packet to
	# be tagged with VLAN 4000 since it is configured as PVID.
	#
	# [1] https://datatracker.ietf.org/doc/html/draft-ietf-bess-evpn-irb-mcast

	run_cmd "tc -n $ns2 qdisc replace dev br0.4000 clsact"
	run_cmd "ip -n $ns2 address replace $mcast_grp/$plen dev veth0 autojoin"
	run_cmd "tc -n $ns2 filter replace dev br0.4000 ingress pref 1 handle 101 proto $proto flower src_ip $src dst_ip $grp action pass"

	run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp src $src permanent dst $mcast_grp src_vni 10010 via veth0"

	# Remove the second VTEP from VLAN 10.
	run_cmd "bridge -n $ns2 vlan del vid 10 dev vx0"

	# Make sure that packets sent from the first VTEP over VLAN 10 are
	# received by the SVI corresponding to the L3VNI (14000 / VLAN 4000) on
	# the second VTEP, since it is configured as PVID.
	run_cmd "ip netns exec $ns1 $mz br0.10 -a own -b $grp_dmac -A $src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
	tc_check_packets "$ns2" "dev br0.4000 ingress" 101 1
	log_test $? 0 "Egress VNI translation - PVID configured"

	# Remove PVID flag from VLAN 4000 on the second VTEP and make sure
	# packets are no longer received by the SVI interface.
	run_cmd "bridge -n $ns2 vlan add vid 4000 dev vx0"
	run_cmd "ip netns exec $ns1 $mz br0.10 -a own -b $grp_dmac -A $src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
	tc_check_packets "$ns2" "dev br0.4000 ingress" 101 1
	log_test $? 0 "Egress VNI translation - no PVID configured"

	# Reconfigure the PVID and make sure packets are received again.
	run_cmd "bridge -n $ns2 vlan add vid 4000 dev vx0 pvid"
	run_cmd "ip netns exec $ns1 $mz br0.10 -a own -b $grp_dmac -A $src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
	tc_check_packets "$ns2" "dev br0.4000 ingress" 101 2
	log_test $? 0 "Egress VNI translation - PVID reconfigured"
}

egress_vni_translation_ipv4_ipv4()
{
	local ns1=$ns1_v4
	local ns2=$ns2_v4
	local mcast_grp=238.1.1.1
	local plen=32
	local proto="ipv4"
	local grp=239.1.1.1
	local grp_dmac=01:00:5e:01:01:01
	local src=192.0.2.129

	echo
	echo "Data path: Egress VNI translation - IPv4 overlay / IPv4 underlay"
	echo "----------------------------------------------------------------"

	egress_vni_translation_common $ns1 $ns2 $mcast_grp $plen $proto $grp \
		$grp_dmac $src "mausezahn"
}

egress_vni_translation_ipv6_ipv4()
{
	local ns1=$ns1_v4
	local ns2=$ns2_v4
	local mcast_grp=238.1.1.1
	local plen=32
	local proto="ipv6"
	local grp=ff0e::1
	local grp_dmac=33:33:00:00:00:01
	local src=2001:db8:100::1

	echo
	echo "Data path: Egress VNI translation - IPv6 overlay / IPv4 underlay"
	echo "----------------------------------------------------------------"

	egress_vni_translation_common $ns1 $ns2 $mcast_grp $plen $proto $grp \
		$grp_dmac $src "mausezahn -6"
}

egress_vni_translation_ipv4_ipv6()
{
	local ns1=$ns1_v6
	local ns2=$ns2_v6
	local mcast_grp=ff0e::2
	local plen=128
	local proto="ipv4"
	local grp=239.1.1.1
	local grp_dmac=01:00:5e:01:01:01
	local src=192.0.2.129

	echo
	echo "Data path: Egress VNI translation - IPv4 overlay / IPv6 underlay"
	echo "----------------------------------------------------------------"

	egress_vni_translation_common $ns1 $ns2 $mcast_grp $plen $proto $grp \
		$grp_dmac $src "mausezahn"
}

egress_vni_translation_ipv6_ipv6()
{
	local ns1=$ns1_v6
	local ns2=$ns2_v6
	local mcast_grp=ff0e::2
	local plen=128
	local proto="ipv6"
	local grp=ff0e::1
	local grp_dmac=33:33:00:00:00:01
	local src=2001:db8:100::1

	echo
	echo "Data path: Egress VNI translation - IPv6 overlay / IPv6 underlay"
	echo "----------------------------------------------------------------"

	egress_vni_translation_common $ns1 $ns2 $mcast_grp $plen $proto $grp \
		$grp_dmac $src "mausezahn -6"
}

all_zeros_mdb_common()
{
	local ns1=$1; shift
	local ns2=$1; shift
	local vtep1_ip=$1; shift
	local vtep2_ip=$1; shift
	local vtep3_ip=$1; shift
	local vtep4_ip=$1; shift
	local plen=$1; shift
	local ipv4_grp=239.1.1.1
	local ipv4_grp_dmac=01:00:5e:01:01:01
	local ipv4_unreg_grp=239.2.2.2
	local ipv4_unreg_grp_dmac=01:00:5e:02:02:02
	local ipv4_ll_grp=224.0.0.100
	local ipv4_ll_grp_dmac=01:00:5e:00:00:64
	local ipv4_src=192.0.2.129
	local ipv6_grp=ff0e::1
	local ipv6_grp_dmac=33:33:00:00:00:01
	local ipv6_unreg_grp=ff0e::2
	local ipv6_unreg_grp_dmac=33:33:00:00:00:02
	local ipv6_ll_grp=ff02::1
	local ipv6_ll_grp_dmac=33:33:00:00:00:01
	local ipv6_src=2001:db8:100::1

	# Install all-zeros (catchall) MDB entries for IPv4 and IPv6 traffic
	# and make sure they only forward unregistered IP multicast traffic
	# which is not link-local. Also make sure that each entry only forwards
	# traffic from the matching address family.

	# Associate two different VTEPs with one all-zeros MDB entry: Two with
	# the IPv4 entry (0.0.0.0) and another two with the IPv6 one (::).
	run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp 0.0.0.0 permanent dst $vtep1_ip src_vni 10010"
	run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp 0.0.0.0 permanent dst $vtep2_ip src_vni 10010"
	run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp :: permanent dst $vtep3_ip src_vni 10010"
	run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp :: permanent dst $vtep4_ip src_vni 10010"

	# Associate one VTEP from each set with a regular MDB entry: One with
	# an IPv4 entry and another with an IPv6 one.
	run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $ipv4_grp permanent dst $vtep1_ip src_vni 10010"
	run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $ipv6_grp permanent dst $vtep3_ip src_vni 10010"

	# Add filters to match on decapsulated traffic in the second namespace.
	run_cmd "tc -n $ns2 qdisc replace dev vx0 clsact"
	run_cmd "tc -n $ns2 filter replace dev vx0 ingress pref 1 handle 101 proto all flower enc_dst_ip $vtep1_ip action pass"
	run_cmd "tc -n $ns2 filter replace dev vx0 ingress pref 1 handle 102 proto all flower enc_dst_ip $vtep2_ip action pass"
	run_cmd "tc -n $ns2 filter replace dev vx0 ingress pref 1 handle 103 proto all flower enc_dst_ip $vtep3_ip action pass"
	run_cmd "tc -n $ns2 filter replace dev vx0 ingress pref 1 handle 104 proto all flower enc_dst_ip $vtep4_ip action pass"

	# Configure the VTEP addresses in the second namespace to enable
	# decapsulation.
	run_cmd "ip -n $ns2 address replace $vtep1_ip/$plen dev lo"
	run_cmd "ip -n $ns2 address replace $vtep2_ip/$plen dev lo"
	run_cmd "ip -n $ns2 address replace $vtep3_ip/$plen dev lo"
	run_cmd "ip -n $ns2 address replace $vtep4_ip/$plen dev lo"

	# Send registered IPv4 multicast and make sure it only arrives to the
	# first VTEP.
	run_cmd "ip netns exec $ns1 mausezahn br0.10 -a own -b $ipv4_grp_dmac -A $ipv4_src -B $ipv4_grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
	tc_check_packets "$ns2" "dev vx0 ingress" 101 1
	log_test $? 0 "Registered IPv4 multicast - first VTEP"
	tc_check_packets "$ns2" "dev vx0 ingress" 102 0
	log_test $? 0 "Registered IPv4 multicast - second VTEP"

	# Send unregistered IPv4 multicast that is not link-local and make sure
	# it arrives to the first and second VTEPs.
	run_cmd "ip netns exec $ns1 mausezahn br0.10 -a own -b $ipv4_unreg_grp_dmac -A $ipv4_src -B $ipv4_unreg_grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
	tc_check_packets "$ns2" "dev vx0 ingress" 101 2
	log_test $? 0 "Unregistered IPv4 multicast - first VTEP"
	tc_check_packets "$ns2" "dev vx0 ingress" 102 1
	log_test $? 0 "Unregistered IPv4 multicast - second VTEP"

	# Send IPv4 link-local multicast traffic and make sure it does not
	# arrive to any VTEP.
	run_cmd "ip netns exec $ns1 mausezahn br0.10 -a own -b $ipv4_ll_grp_dmac -A $ipv4_src -B $ipv4_ll_grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
	tc_check_packets "$ns2" "dev vx0 ingress" 101 2
	log_test $? 0 "Link-local IPv4 multicast - first VTEP"
	tc_check_packets "$ns2" "dev vx0 ingress" 102 1
	log_test $? 0 "Link-local IPv4 multicast - second VTEP"

	# Send registered IPv4 multicast using a unicast MAC address and make
	# sure it does not arrive to any VTEP.
	run_cmd "ip netns exec $ns1 mausezahn br0.10 -a own -b 00:11:22:33:44:55 -A $ipv4_src -B $ipv4_grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
	tc_check_packets "$ns2" "dev vx0 ingress" 101 2
	log_test $? 0 "Registered IPv4 multicast with a unicast MAC - first VTEP"
	tc_check_packets "$ns2" "dev vx0 ingress" 102 1
	log_test $? 0 "Registered IPv4 multicast with a unicast MAC - second VTEP"

	# Send registered IPv4 multicast using a broadcast MAC address and make
	# sure it does not arrive to any VTEP.
	run_cmd "ip netns exec $ns1 mausezahn br0.10 -a own -b bcast -A $ipv4_src -B $ipv4_grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
	tc_check_packets "$ns2" "dev vx0 ingress" 101 2
	log_test $? 0 "Registered IPv4 multicast with a broadcast MAC - first VTEP"
	tc_check_packets "$ns2" "dev vx0 ingress" 102 1
	log_test $? 0 "Registered IPv4 multicast with a broadcast MAC - second VTEP"

	# Make sure IPv4 traffic did not reach the VTEPs associated with
	# IPv6 entries.
	tc_check_packets "$ns2" "dev vx0 ingress" 103 0
	log_test $? 0 "IPv4 traffic - third VTEP"
	tc_check_packets "$ns2" "dev vx0 ingress" 104 0
	log_test $? 0 "IPv4 traffic - fourth VTEP"

	# Reset IPv4 filters before testing IPv6 traffic.
	run_cmd "tc -n $ns2 filter replace dev vx0 ingress pref 1 handle 101 proto all flower enc_dst_ip $vtep1_ip action pass"
	run_cmd "tc -n $ns2 filter replace dev vx0 ingress pref 1 handle 102 proto all flower enc_dst_ip $vtep2_ip action pass"

	# Send registered IPv6 multicast and make sure it only arrives to the
	# third VTEP.
	run_cmd "ip netns exec $ns1 mausezahn -6 br0.10 -a own -b $ipv6_grp_dmac -A $ipv6_src -B $ipv6_grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
	tc_check_packets "$ns2" "dev vx0 ingress" 103 1
	log_test $? 0 "Registered IPv6 multicast - third VTEP"
	tc_check_packets "$ns2" "dev vx0 ingress" 104 0
	log_test $? 0 "Registered IPv6 multicast - fourth VTEP"

	# Send unregistered IPv6 multicast that is not link-local and make sure
	# it arrives to the third and fourth VTEPs.
	run_cmd "ip netns exec $ns1 mausezahn -6 br0.10 -a own -b $ipv6_unreg_grp_dmac -A $ipv6_src -B $ipv6_unreg_grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
	tc_check_packets "$ns2" "dev vx0 ingress" 103 2
	log_test $? 0 "Unregistered IPv6 multicast - third VTEP"
	tc_check_packets "$ns2" "dev vx0 ingress" 104 1
	log_test $? 0 "Unregistered IPv6 multicast - fourth VTEP"

	# Send IPv6 link-local multicast traffic and make sure it does not
	# arrive to any VTEP.
	run_cmd "ip netns exec $ns1 mausezahn -6 br0.10 -a own -b $ipv6_ll_grp_dmac -A $ipv6_src -B $ipv6_ll_grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
	tc_check_packets "$ns2" "dev vx0 ingress" 103 2
	log_test $? 0 "Link-local IPv6 multicast - third VTEP"
	tc_check_packets "$ns2" "dev vx0 ingress" 104 1
	log_test $? 0 "Link-local IPv6 multicast - fourth VTEP"

	# Send registered IPv6 multicast using a unicast MAC address and make
	# sure it does not arrive to any VTEP.
	run_cmd "ip netns exec $ns1 mausezahn -6 br0.10 -a own -b 00:11:22:33:44:55 -A $ipv6_src -B $ipv6_grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
	tc_check_packets "$ns2" "dev vx0 ingress" 103 2
	log_test $? 0 "Registered IPv6 multicast with a unicast MAC - third VTEP"
	tc_check_packets "$ns2" "dev vx0 ingress" 104 1
	log_test $? 0 "Registered IPv6 multicast with a unicast MAC - fourth VTEP"

	# Send registered IPv6 multicast using a broadcast MAC address and make
	# sure it does not arrive to any VTEP.
	run_cmd "ip netns exec $ns1 mausezahn -6 br0.10 -a own -b bcast -A $ipv6_src -B $ipv6_grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
	tc_check_packets "$ns2" "dev vx0 ingress" 103 2
	log_test $? 0 "Registered IPv6 multicast with a broadcast MAC - third VTEP"
	tc_check_packets "$ns2" "dev vx0 ingress" 104 1
	log_test $? 0 "Registered IPv6 multicast with a broadcast MAC - fourth VTEP"

	# Make sure IPv6 traffic did not reach the VTEPs associated with
	# IPv4 entries.
	tc_check_packets "$ns2" "dev vx0 ingress" 101 0
	log_test $? 0 "IPv6 traffic - first VTEP"
	tc_check_packets "$ns2" "dev vx0 ingress" 102 0
	log_test $? 0 "IPv6 traffic - second VTEP"
}

all_zeros_mdb_ipv4()
{
	local ns1=$ns1_v4
	local ns2=$ns2_v4
	local vtep1_ip=198.51.100.101
	local vtep2_ip=198.51.100.102
	local vtep3_ip=198.51.100.103
	local vtep4_ip=198.51.100.104
	local plen=32

	echo
	echo "Data path: All-zeros MDB entry - IPv4 underlay"
	echo "----------------------------------------------"

	all_zeros_mdb_common $ns1 $ns2 $vtep1_ip $vtep2_ip $vtep3_ip \
		$vtep4_ip $plen
}

all_zeros_mdb_ipv6()
{
	local ns1=$ns1_v6
	local ns2=$ns2_v6
	local vtep1_ip=2001:db8:1000::1
	local vtep2_ip=2001:db8:2000::1
	local vtep3_ip=2001:db8:3000::1
	local vtep4_ip=2001:db8:4000::1
	local plen=128

	echo
	echo "Data path: All-zeros MDB entry - IPv6 underlay"
	echo "----------------------------------------------"

	all_zeros_mdb_common $ns1 $ns2 $vtep1_ip $vtep2_ip $vtep3_ip \
		$vtep4_ip $plen
}

mdb_fdb_common()
{
	local ns1=$1; shift
	local ns2=$1; shift
	local vtep1_ip=$1; shift
	local vtep2_ip=$1; shift
	local plen=$1; shift
	local proto=$1; shift
	local grp=$1; shift
	local grp_dmac=$1; shift
	local src=$1; shift
	local mz=$1; shift

	# Install an MDB entry and an FDB entry and make sure that the FDB
	# entry only forwards traffic that was not forwarded by the MDB.

	# Associate the MDB entry with one VTEP and the FDB entry with another
	# VTEP.
	run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent dst $vtep1_ip src_vni 10010"
	run_cmd "bridge -n $ns1 fdb add 00:00:00:00:00:00 dev vx0 self static dst $vtep2_ip src_vni 10010"

	# Add filters to match on decapsulated traffic in the second namespace.
	run_cmd "tc -n $ns2 qdisc replace dev vx0 clsact"
	run_cmd "tc -n $ns2 filter replace dev vx0 ingress pref 1 handle 101 proto $proto flower ip_proto udp dst_port 54321 enc_dst_ip $vtep1_ip action pass"
	run_cmd "tc -n $ns2 filter replace dev vx0 ingress pref 1 handle 102 proto $proto flower ip_proto udp dst_port 54321 enc_dst_ip $vtep2_ip action pass"

	# Configure the VTEP addresses in the second namespace to enable
	# decapsulation.
	run_cmd "ip -n $ns2 address replace $vtep1_ip/$plen dev lo"
	run_cmd "ip -n $ns2 address replace $vtep2_ip/$plen dev lo"

	# Send IP multicast traffic and make sure it is forwarded by the MDB
	# and only arrives to the first VTEP.
	run_cmd "ip netns exec $ns1 $mz br0.10 -a own -b $grp_dmac -A $src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
	tc_check_packets "$ns2" "dev vx0 ingress" 101 1
	log_test $? 0 "IP multicast - first VTEP"
	tc_check_packets "$ns2" "dev vx0 ingress" 102 0
	log_test $? 0 "IP multicast - second VTEP"

	# Send broadcast traffic and make sure it is forwarded by the FDB and
	# only arrives to the second VTEP.
	run_cmd "ip netns exec $ns1 $mz br0.10 -a own -b bcast -A $src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
	tc_check_packets "$ns2" "dev vx0 ingress" 101 1
	log_test $? 0 "Broadcast - first VTEP"
	tc_check_packets "$ns2" "dev vx0 ingress" 102 1
	log_test $? 0 "Broadcast - second VTEP"

	# Remove the MDB entry and make sure that IP multicast is now forwarded
	# by the FDB to the second VTEP.
	run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 grp $grp dst $vtep1_ip src_vni 10010"
	run_cmd "ip netns exec $ns1 $mz br0.10 -a own -b $grp_dmac -A $src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
	tc_check_packets "$ns2" "dev vx0 ingress" 101 1
	log_test $? 0 "IP multicast after removal - first VTEP"
	tc_check_packets "$ns2" "dev vx0 ingress" 102 2
	log_test $? 0 "IP multicast after removal - second VTEP"
}

mdb_fdb_ipv4_ipv4()
{
	local ns1=$ns1_v4
	local ns2=$ns2_v4
	local vtep1_ip=198.51.100.100
	local vtep2_ip=198.51.100.200
	local plen=32
	local proto="ipv4"
	local grp=239.1.1.1
	local grp_dmac=01:00:5e:01:01:01
	local src=192.0.2.129

	echo
	echo "Data path: MDB with FDB - IPv4 overlay / IPv4 underlay"
	echo "------------------------------------------------------"

	mdb_fdb_common $ns1 $ns2 $vtep1_ip $vtep2_ip $plen $proto $grp \
		$grp_dmac $src "mausezahn"
}

mdb_fdb_ipv6_ipv4()
{
	local ns1=$ns1_v4
	local ns2=$ns2_v4
	local vtep1_ip=198.51.100.100
	local vtep2_ip=198.51.100.200
	local plen=32
	local proto="ipv6"
	local grp=ff0e::1
	local grp_dmac=33:33:00:00:00:01
	local src=2001:db8:100::1

	echo
	echo "Data path: MDB with FDB - IPv6 overlay / IPv4 underlay"
	echo "------------------------------------------------------"

	mdb_fdb_common $ns1 $ns2 $vtep1_ip $vtep2_ip $plen $proto $grp \
		$grp_dmac $src "mausezahn -6"
}

mdb_fdb_ipv4_ipv6()
{
	local ns1=$ns1_v6
	local ns2=$ns2_v6
	local vtep1_ip=2001:db8:1000::1
	local vtep2_ip=2001:db8:2000::1
	local plen=128
	local proto="ipv4"
	local grp=239.1.1.1
	local grp_dmac=01:00:5e:01:01:01
	local src=192.0.2.129

	echo
	echo "Data path: MDB with FDB - IPv4 overlay / IPv6 underlay"
	echo "------------------------------------------------------"

	mdb_fdb_common $ns1 $ns2 $vtep1_ip $vtep2_ip $plen $proto $grp \
		$grp_dmac $src "mausezahn"
}

mdb_fdb_ipv6_ipv6()
{
	local ns1=$ns1_v6
	local ns2=$ns2_v6
	local vtep1_ip=2001:db8:1000::1
	local vtep2_ip=2001:db8:2000::1
	local plen=128
	local proto="ipv6"
	local grp=ff0e::1
	local grp_dmac=33:33:00:00:00:01
	local src=2001:db8:100::1

	echo
	echo "Data path: MDB with FDB - IPv6 overlay / IPv6 underlay"
	echo "------------------------------------------------------"

	mdb_fdb_common $ns1 $ns2 $vtep1_ip $vtep2_ip $plen $proto $grp \
		$grp_dmac $src "mausezahn -6"
}

mdb_grp1_loop()
{
	local ns1=$1; shift
	local vtep1_ip=$1; shift
	local grp1=$1; shift

	while true; do
		bridge -n $ns1 mdb del dev vx0 port vx0 grp $grp1 dst $vtep1_ip src_vni 10010
		bridge -n $ns1 mdb add dev vx0 port vx0 grp $grp1 permanent dst $vtep1_ip src_vni 10010
	done >/dev/null 2>&1
}

mdb_grp2_loop()
{
	local ns1=$1; shift
	local vtep1_ip=$1; shift
	local vtep2_ip=$1; shift
	local grp2=$1; shift

	while true; do
		bridge -n $ns1 mdb del dev vx0 port vx0 grp $grp2 dst $vtep1_ip src_vni 10010
		bridge -n $ns1 mdb add dev vx0 port vx0 grp $grp2 permanent dst $vtep1_ip src_vni 10010
		bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp2 permanent dst $vtep2_ip src_vni 10010
	done >/dev/null 2>&1
}

mdb_torture_common()
{
	local ns1=$1; shift
	local vtep1_ip=$1; shift
	local vtep2_ip=$1; shift
	local grp1=$1; shift
	local grp1_dmac=$1; shift
	local grp2=$1; shift
	local grp2_dmac=$1; shift
	local src=$1; shift
	local mz=$1; shift
	local pid1
	local pid2
	local pid3
	local pid4

	# Continuously send two streams that are forwarded by two different MDB
	# entries. The first entry will be added and deleted in a loop. This
	# allows us to test that the data path does not use freed MDB entry
	# memory. The second entry will have two remotes, one that is added and
	# deleted in a loop and another that is replaced in a loop. This allows
	# us to test that the data path does not use freed remote entry memory.
	# The test is considered successful if nothing crashed.

	# Create the MDB entries that will be continuously deleted / replaced.
	run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp1 permanent dst $vtep1_ip src_vni 10010"
	run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp2 permanent dst $vtep1_ip src_vni 10010"
	run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp2 permanent dst $vtep2_ip src_vni 10010"

	mdb_grp1_loop $ns1 $vtep1_ip $grp1 &
	pid1=$!
	mdb_grp2_loop $ns1 $vtep1_ip $vtep2_ip $grp2 &
	pid2=$!
	ip netns exec $ns1 $mz br0.10 -a own -b $grp1_dmac -A $src -B $grp1 -t udp sp=12345,dp=54321 -p 100 -c 0 -q &
	pid3=$!
	ip netns exec $ns1 $mz br0.10 -a own -b $grp2_dmac -A $src -B $grp2 -t udp sp=12345,dp=54321 -p 100 -c 0 -q &
	pid4=$!

	sleep 30
	kill -9 $pid1 $pid2 $pid3 $pid4
	wait $pid1 $pid2 $pid3 $pid4 2>/dev/null

	log_test 0 0 "Torture test"
}

mdb_torture_ipv4_ipv4()
{
	local ns1=$ns1_v4
	local vtep1_ip=198.51.100.100
	local vtep2_ip=198.51.100.200
	local grp1=239.1.1.1
	local grp1_dmac=01:00:5e:01:01:01
	local grp2=239.2.2.2
	local grp2_dmac=01:00:5e:02:02:02
	local src=192.0.2.129

	echo
	echo "Data path: MDB torture test - IPv4 overlay / IPv4 underlay"
	echo "----------------------------------------------------------"

	mdb_torture_common $ns1 $vtep1_ip $vtep2_ip $grp1 $grp1_dmac $grp2 \
		$grp2_dmac $src "mausezahn"
}

mdb_torture_ipv6_ipv4()
{
	local ns1=$ns1_v4
	local vtep1_ip=198.51.100.100
	local vtep2_ip=198.51.100.200
	local grp1=ff0e::1
	local grp1_dmac=33:33:00:00:00:01
	local grp2=ff0e::2
	local grp2_dmac=33:33:00:00:00:02
	local src=2001:db8:100::1

	echo
	echo "Data path: MDB torture test - IPv6 overlay / IPv4 underlay"
	echo "----------------------------------------------------------"

	mdb_torture_common $ns1 $vtep1_ip $vtep2_ip $grp1 $grp1_dmac $grp2 \
		$grp2_dmac $src "mausezahn -6"
}

mdb_torture_ipv4_ipv6()
{
	local ns1=$ns1_v6
	local vtep1_ip=2001:db8:1000::1
	local vtep2_ip=2001:db8:2000::1
	local grp1=239.1.1.1
	local grp1_dmac=01:00:5e:01:01:01
	local grp2=239.2.2.2
	local grp2_dmac=01:00:5e:02:02:02
	local src=192.0.2.129

	echo
	echo "Data path: MDB torture test - IPv4 overlay / IPv6 underlay"
	echo "----------------------------------------------------------"

	mdb_torture_common $ns1 $vtep1_ip $vtep2_ip $grp1 $grp1_dmac $grp2 \
		$grp2_dmac $src "mausezahn"
}

mdb_torture_ipv6_ipv6()
{
	local ns1=$ns1_v6
	local vtep1_ip=2001:db8:1000::1
	local vtep2_ip=2001:db8:2000::1
	local grp1=ff0e::1
	local grp1_dmac=33:33:00:00:00:01
	local grp2=ff0e::2
	local grp2_dmac=33:33:00:00:00:02
	local src=2001:db8:100::1

	echo
	echo "Data path: MDB torture test - IPv6 overlay / IPv6 underlay"
	echo "----------------------------------------------------------"

	mdb_torture_common $ns1 $vtep1_ip $vtep2_ip $grp1 $grp1_dmac $grp2 \
		$grp2_dmac $src "mausezahn -6"
}

################################################################################
# Usage

usage()
{
	cat <<EOF
usage: ${0##*/} OPTS

        -t <test>   Test(s) to run (default: all)
                    (options: $TESTS)
        -c          Control path tests only
        -d          Data path tests only
        -p          Pause on fail
        -P          Pause after each test before cleanup
        -v          Verbose mode (show commands and output)
EOF
}

################################################################################
# Main

trap cleanup EXIT

while getopts ":t:cdpPvh" opt; do
	case $opt in
		t) TESTS=$OPTARG;;
		c) TESTS=${CONTROL_PATH_TESTS};;
		d) TESTS=${DATA_PATH_TESTS};;
		p) PAUSE_ON_FAIL=yes;;
		P) PAUSE=yes;;
		v) VERBOSE=$(($VERBOSE + 1));;
		h) usage; exit 0;;
		*) usage; exit 1;;
	esac
done

# Make sure we don't pause twice.
[ "${PAUSE}" = "yes" ] && PAUSE_ON_FAIL=no

if [ "$(id -u)" -ne 0 ];then
	echo "SKIP: Need root privileges"
	exit $ksft_skip;
fi

if [ ! -x "$(command -v ip)" ]; then
	echo "SKIP: Could not run test without ip tool"
	exit $ksft_skip
fi

if [ ! -x "$(command -v bridge)" ]; then
	echo "SKIP: Could not run test without bridge tool"
	exit $ksft_skip
fi

if [ ! -x "$(command -v mausezahn)" ]; then
	echo "SKIP: Could not run test without mausezahn tool"
	exit $ksft_skip
fi

if [ ! -x "$(command -v jq)" ]; then
	echo "SKIP: Could not run test without jq tool"
	exit $ksft_skip
fi

bridge mdb help 2>&1 | grep -q "flush"
if [ $? -ne 0 ]; then
   echo "SKIP: iproute2 bridge too old, missing VXLAN MDB flush support"
   exit $ksft_skip
fi

# Start clean.
cleanup

for t in $TESTS
do
	setup; $t; cleanup;
done

if [ "$TESTS" != "none" ]; then
	printf "\nTests passed: %3d\n" ${nsuccess}
	printf "Tests failed: %3d\n"   ${nfail}
fi

exit $ret