1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
|
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/cache/l2c2x0.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: ARM L2 Cache Controller
maintainers:
- Rob Herring <robh@kernel.org>
description: |+
ARM cores often have a separate L2C210/L2C220/L2C310 (also known as PL210/
PL220/PL310 and variants) based level 2 cache controller. All these various
implementations of the L2 cache controller have compatible programming
models (Note 1). Some of the properties that are just prefixed "cache-*" are
taken from section 3.7.3 of the Devicetree Specification which can be found
at:
https://www.devicetree.org/specifications/
Note 1: The description in this document doesn't apply to integrated L2
cache controllers as found in e.g. Cortex-A15/A7/A57/A53. These
integrated L2 controllers are assumed to be all preconfigured by
early secure boot code. Thus no need to deal with their configuration
in the kernel at all.
allOf:
- $ref: /schemas/cache-controller.yaml#
properties:
compatible:
oneOf:
- enum:
- arm,pl310-cache
- arm,l220-cache
- arm,l210-cache
# DEPRECATED by "brcm,bcm11351-a2-pl310-cache"
- bcm,bcm11351-a2-pl310-cache
# For Broadcom bcm11351 chipset where an
# offset needs to be added to the address before passing down to the L2
# cache controller
- brcm,bcm11351-a2-pl310-cache
# Marvell Controller designed to be
# compatible with the ARM one, with system cache mode (meaning
# maintenance operations on L1 are broadcasted to the L2 and L2
# performs the same operation).
- marvell,aurora-system-cache
# Marvell Controller designed to be
# compatible with the ARM one with outer cache mode.
- marvell,aurora-outer-cache
- items:
# Marvell Tauros3 cache controller, compatible
# with arm,pl310-cache controller.
- const: marvell,tauros3-cache
- const: arm,pl310-cache
cache-level:
const: 2
cache-unified: true
cache-size: true
cache-sets: true
cache-block-size: true
cache-line-size: true
reg:
maxItems: 1
arm,data-latency:
description: Cycles of latency for Data RAM accesses. Specifies 3 cells of
read, write and setup latencies. Minimum valid values are 1. Controllers
without setup latency control should use a value of 0.
$ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 2
maxItems: 3
items:
minimum: 0
maximum: 8
arm,tag-latency:
description: Cycles of latency for Tag RAM accesses. Specifies 3 cells of
read, write and setup latencies. Controllers without setup latency control
should use 0. Controllers without separate read and write Tag RAM latency
values should only use the first cell.
$ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 1
maxItems: 3
items:
minimum: 0
maximum: 8
arm,dirty-latency:
description: Cycles of latency for Dirty RAMs. This is a single cell.
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 1
maximum: 8
arm,filter-ranges:
description: <start length> Starting address and length of window to
filter. Addresses in the filter window are directed to the M1 port. Other
addresses will go to the M0 port.
$ref: /schemas/types.yaml#/definitions/uint32-array
items:
minItems: 2
maxItems: 2
arm,io-coherent:
description: indicates that the system is operating in an hardware
I/O coherent mode. Valid only when the arm,pl310-cache compatible
string is used.
type: boolean
interrupts:
# Either a single combined interrupt or up to 9 individual interrupts
minItems: 1
maxItems: 9
cache-id-part:
description: cache id part number to be used if it is not present
on hardware
$ref: /schemas/types.yaml#/definitions/uint32
wt-override:
description: If present then L2 is forced to Write through mode
type: boolean
arm,double-linefill:
description: Override double linefill enable setting. Enable if
non-zero, disable if zero.
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1]
arm,double-linefill-incr:
description: Override double linefill on INCR read. Enable
if non-zero, disable if zero.
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1]
arm,double-linefill-wrap:
description: Override double linefill on WRAP read. Enable
if non-zero, disable if zero.
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1]
arm,prefetch-drop:
description: Override prefetch drop enable setting. Enable if non-zero,
disable if zero.
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1]
arm,prefetch-offset:
description: Override prefetch offset value.
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2, 3, 4, 5, 6, 7, 15, 23, 31]
arm,shared-override:
description: The default behavior of the L220 or PL310 cache
controllers with respect to the shareable attribute is to transform "normal
memory non-cacheable transactions" into "cacheable no allocate" (for reads)
or "write through no write allocate" (for writes).
On systems where this may cause DMA buffer corruption, this property must
be specified to indicate that such transforms are precluded.
type: boolean
arm,parity-enable:
description: enable parity checking on the L2 cache (L220 or PL310).
type: boolean
arm,parity-disable:
description: disable parity checking on the L2 cache (L220 or PL310).
type: boolean
marvell,ecc-enable:
description: enable ECC protection on the L2 cache
type: boolean
arm,outer-sync-disable:
description: disable the outer sync operation on the L2 cache.
Some core tiles, especially ARM PB11MPCore have a faulty L220 cache that
will randomly hang unless outer sync operations are disabled.
type: boolean
prefetch-data:
description: |
Data prefetch. Value: <0> (forcibly disable), <1>
(forcibly enable), property absent (retain settings set by firmware)
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1]
prefetch-instr:
description: |
Instruction prefetch. Value: <0> (forcibly disable),
<1> (forcibly enable), property absent (retain settings set by
firmware)
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1]
arm,dynamic-clock-gating:
description: |
L2 dynamic clock gating. Value: <0> (forcibly
disable), <1> (forcibly enable), property absent (OS specific behavior,
preferably retain firmware settings)
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1]
arm,standby-mode:
description: L2 standby mode enable. Value <0> (forcibly disable),
<1> (forcibly enable), property absent (OS specific behavior,
preferably retain firmware settings)
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1]
arm,early-bresp-disable:
description: Disable the CA9 optimization Early BRESP (PL310)
type: boolean
arm,full-line-zero-disable:
description: Disable the CA9 optimization Full line of zero
write (PL310)
type: boolean
required:
- compatible
- cache-unified
- reg
additionalProperties: false
examples:
- |
cache-controller@fff12000 {
compatible = "arm,pl310-cache";
reg = <0xfff12000 0x1000>;
arm,data-latency = <1 1 1>;
arm,tag-latency = <2 2 2>;
arm,filter-ranges = <0x80000000 0x8000000>;
cache-unified;
cache-level = <2>;
interrupts = <45>;
};
...
|
