blob: be7e9e91a3a8c39a270a761655154639bc75a3fb (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/hwmon/adi,adm1177.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Analog Devices ADM1177 Hot Swap Controller and Digital Power Monitor
maintainers:
- Michael Hennerich <michael.hennerich@analog.com>
description: |
Analog Devices ADM1177 Hot Swap Controller and Digital Power Monitor
https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1177.pdf
properties:
compatible:
enum:
- adi,adm1177
reg:
maxItems: 1
avcc-supply:
description:
Phandle to the Avcc power supply
shunt-resistor-micro-ohms:
description:
The value of current sense resistor in microohms. If not provided,
the current reading and overcurrent alert is disabled.
adi,shutdown-threshold-microamp:
description:
Specifies the current level at which an over current alert occurs.
If not provided, the overcurrent alert is configured to max ADC range
based on shunt-resistor-micro-ohms.
adi,vrange-high-enable:
description:
Specifies which internal voltage divider to be used. A 1 selects
a 7:2 voltage divider while a 0 selects a 14:1 voltage divider.
type: boolean
required:
- compatible
- reg
allOf:
- $ref: hwmon-common.yaml#
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
pwmon@5a {
compatible = "adi,adm1177";
reg = <0x5a>;
shunt-resistor-micro-ohms = <50000>; /* 50 mOhm */
adi,shutdown-threshold-microamp = <1059000>; /* 1.059 A */
adi,vrange-high-enable;
};
};
...
|
