blob: 3cb82576d7586427b709d32f568211760d0e417f (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/iio/accel/bosch,bmi088.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Bosch BMI088 IMU accelerometer part
maintainers:
- Mike Looijmans <mike.looijmans@topic.nl>
description: |
Acceleration part of the IMU sensor with an SPI interface
Specifications about the sensor can be found at:
https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmi088-ds001.pdf
properties:
compatible:
enum:
- bosch,bmi085-accel
- bosch,bmi088-accel
- bosch,bmi090l-accel
reg:
maxItems: 1
vdd-supply: true
vddio-supply: true
interrupts:
minItems: 1
maxItems: 2
description: |
Type should be either IRQ_TYPE_LEVEL_HIGH or IRQ_TYPE_LEVEL_LOW.
Two configurable interrupt lines exist.
interrupt-names:
description: Specify which interrupt line is in use.
items:
enum:
- INT1
- INT2
minItems: 1
maxItems: 2
required:
- compatible
- reg
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
spi {
#address-cells = <1>;
#size-cells = <0>;
bmi088-accel@1 {
compatible = "bosch,bmi088-accel";
reg = <1>;
spi-max-frequency = <10000000>;
interrupt-parent = <&gpio6>;
interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
interrupt-names = "INT2";
};
};
...
|
