summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/net/mdio-mux-gpio.yaml
blob: 71c25c4580eae3726e857357d1332129817e5069 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/mdio-mux-gpio.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Properties for an MDIO bus multiplexer/switch controlled by GPIO pins.

maintainers:
  - Andrew Lunn <andrew@lunn.ch>

description:
  This is a special case of a MDIO bus multiplexer.  One or more GPIO
  lines are used to control which child bus is connected.

allOf:
  - $ref: /schemas/net/mdio-mux.yaml#

properties:
  compatible:
    const: mdio-mux-gpio

  gpios:
    description:
      List of GPIOs used to control the multiplexer, least significant bit first.
    minItems: 1
    maxItems: 32

required:
  - compatible
  - gpios

unevaluatedProperties: false

examples:
  - |
    /*
     An NXP sn74cbtlv3253 dual 1-of-4 switch controlled by a
     pair of GPIO lines.  Child busses 2 and 3 populated with 4
     PHYs each.
     */
    mdio-mux {
        compatible = "mdio-mux-gpio";
        gpios = <&gpio1 3 0>, <&gpio1 4 0>;
        mdio-parent-bus = <&smi1>;
        #address-cells = <1>;
        #size-cells = <0>;

        mdio@2 {
            reg = <2>;
            #address-cells = <1>;
            #size-cells = <0>;

            ethernet-phy@1 {
                reg = <1>;
                marvell,reg-init = <3 0x10 0 0x5777>,
                  <3 0x11 0 0x00aa>,
                  <3 0x12 0 0x4105>,
                  <3 0x13 0 0x0a60>;
                interrupt-parent = <&gpio>;
                interrupts = <10 8>; /* Pin 10, active low */
            };
            ethernet-phy@2 {
                reg = <2>;
                marvell,reg-init = <3 0x10 0 0x5777>,
                  <3 0x11 0 0x00aa>,
                  <3 0x12 0 0x4105>,
                  <3 0x13 0 0x0a60>;
                interrupt-parent = <&gpio>;
                interrupts = <10 8>; /* Pin 10, active low */
            };
            ethernet-phy@3 {
                reg = <3>;
                marvell,reg-init = <3 0x10 0 0x5777>,
                  <3 0x11 0 0x00aa>,
                  <3 0x12 0 0x4105>,
                  <3 0x13 0 0x0a60>;
                interrupt-parent = <&gpio>;
                interrupts = <10 8>; /* Pin 10, active low */
            };
            ethernet-phy@4 {
                reg = <4>;
                marvell,reg-init = <3 0x10 0 0x5777>,
                  <3 0x11 0 0x00aa>,
                  <3 0x12 0 0x4105>,
                  <3 0x13 0 0x0a60>;
                interrupt-parent = <&gpio>;
                interrupts = <10 8>; /* Pin 10, active low */
            };
        };

        mdio@3 {
            reg = <3>;
            #address-cells = <1>;
            #size-cells = <0>;

            ethernet-phy@1 {
                reg = <1>;
                marvell,reg-init = <3 0x10 0 0x5777>,
                  <3 0x11 0 0x00aa>,
                  <3 0x12 0 0x4105>,
                  <3 0x13 0 0x0a60>;
                interrupt-parent = <&gpio>;
                interrupts = <12 8>; /* Pin 12, active low */
            };
            ethernet-phy@2 {
                reg = <2>;
                marvell,reg-init = <3 0x10 0 0x5777>,
                  <3 0x11 0 0x00aa>,
                  <3 0x12 0 0x4105>,
                  <3 0x13 0 0x0a60>;
                interrupt-parent = <&gpio>;
                interrupts = <12 8>; /* Pin 12, active low */
            };
            ethernet-phy@3 {
                reg = <3>;
                marvell,reg-init = <3 0x10 0 0x5777>,
                  <3 0x11 0 0x00aa>,
                  <3 0x12 0 0x4105>,
                  <3 0x13 0 0x0a60>;
                interrupt-parent = <&gpio>;
                interrupts = <12 8>; /* Pin 12, active low */
            };
            ethernet-phy@4 {
                reg = <4>;
                marvell,reg-init = <3 0x10 0 0x5777>,
                  <3 0x11 0 0x00aa>,
                  <3 0x12 0 0x4105>,
                  <3 0x13 0 0x0a60>;
                interrupt-parent = <&gpio>;
                interrupts = <12 8>; /* Pin 12, active low */
            };
        };
    };
...