blob: b40fb5d15d3d9b45726a9631a8b99cba916b6372 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
|
NXP Layerscape PCIe Gen4 controller
This PCIe controller is based on the Mobiveil PCIe IP and thus inherits all
the common properties defined in mobiveil-pcie.txt.
Required properties:
- compatible: should contain the platform identifier such as:
"fsl,lx2160a-pcie"
- reg: base addresses and lengths of the PCIe controller register blocks.
"csr_axi_slave": Bridge config registers
"config_axi_slave": PCIe controller registers
- interrupts: A list of interrupt outputs of the controller. Must contain an
entry for each entry in the interrupt-names property.
- interrupt-names: It could include the following entries:
"intr": The interrupt that is asserted for controller interrupts
"aer": Asserted for aer interrupt when chip support the aer interrupt with
none MSI/MSI-X/INTx mode,but there is interrupt line for aer.
"pme": Asserted for pme interrupt when chip support the pme interrupt with
none MSI/MSI-X/INTx mode,but there is interrupt line for pme.
- dma-coherent: Indicates that the hardware IP block can ensure the coherency
of the data transferred from/to the IP block. This can avoid the software
cache flush/invalid actions, and improve the performance significantly.
- msi-parent : See the generic MSI binding described in
Documentation/devicetree/bindings/interrupt-controller/msi.txt.
Example:
pcie@3400000 {
compatible = "fsl,lx2160a-pcie";
reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
0x80 0x00000000 0x0 0x00001000>; /* configuration space */
reg-names = "csr_axi_slave", "config_axi_slave";
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
interrupt-names = "aer", "pme", "intr";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
apio-wins = <8>;
ppio-wins = <8>;
dma-coherent;
bus-range = <0x0 0xff>;
msi-parent = <&its>;
ranges = <0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
<0000 0 0 2 &gic 0 0 GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
<0000 0 0 3 &gic 0 0 GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
<0000 0 0 4 &gic 0 0 GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
};
|
