1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
|
Lantiq XWAY pinmux controller
Required properties:
- compatible: "lantiq,<chip>-pinctrl", where <chip> is:
"ase" (XWAY AMAZON Family)
"danube" (XWAY DANUBE Family)
"xrx100" (XWAY xRX100 Family)
"xrx200" (XWAY xRX200 Family)
"xrx300" (XWAY xRX300 Family)
- reg: Should contain the physical address and length of the gpio/pinmux
register range
Please refer to pinctrl-bindings.txt in this directory for details of the
common pinctrl bindings used by client devices, including the meaning of the
phrase "pin configuration node".
Lantiq's pin configuration nodes act as a container for an arbitrary number of
subnodes. Each of these subnodes represents some desired configuration for a
pin, a group, or a list of pins or groups. This configuration can include the
mux function to select on those group(s), and two pin configuration parameters:
pull-up and open-drain
The name of each subnode is not important as long as it is unique; all subnodes
should be enumerated and processed purely based on their content.
Each subnode only affects those parameters that are explicitly listed. In
other words, a subnode that lists a mux function but no pin configuration
parameters implies no information about any pin configuration parameters.
Similarly, a pin subnode that describes a pullup parameter implies no
information about e.g. the mux function.
We support 2 types of nodes.
Definition of mux function groups:
Required subnode-properties:
- lantiq,groups : An array of strings. Each string contains the name of a group.
Valid values for these names are listed below.
- lantiq,function: A string containing the name of the function to mux to the
group. Valid values for function names are listed below.
Valid values for group and function names:
AMAZON:
mux groups:
exin0, exin1, exin2, jtag, spi_di, spi_do, spi_clk, spi_cs1, spi_cs2,
spi_cs3, spi_cs4, spi_cs5, spi_cs6, asc, stp, gpt1, gpt2, gpt3, clkout0,
clkout1, clkout2, mdio, dfe led0, dfe led1, ephy led0, ephy led1, ephy led2
functions:
spi, asc, cgu, jtag, exin, stp, gpt, mdio, ephy, dfe
DANUBE:
mux groups:
exin0, exin1, exin2, jtag, ebu a23, ebu a24, ebu a25, ebu clk, ebu cs1,
ebu wait, nand ale, nand cs1, nand cle, spi_di, spi_do, spi_clk, spi_cs1,
spi_cs2, spi_cs3, spi_cs4, spi_cs5, spi_cs6, asc0, asc0 cts rts, stp, nmi,
gpt1, gpt2, gpt3, clkout0, clkout1, clkout2, clkout3, gnt1, gnt2, gnt3,
req1, req2, req3, dfe led0, dfe led1
functions:
spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu, dfe
xRX100:
mux groups:
exin0, exin1, exin2, exin3, exin4, ebu a23, ebu a24, ebu a25, ebu clk,
ebu cs1, ebu wait, nand ale, nand cs1, nand cle, nand rdy, nand rd,
spi_di, spi_do, spi_clk, spi_cs1, spi_cs2, spi_cs3, spi_cs4, spi_cs5,
spi_cs6, asc0, asc0 cts rts, stp, nmi, gpt1, gpt2, gpt3, clkout0, clkout1,
clkout2, clkout3, gnt1, gnt2, gnt3, gnt4, req1, req2, req3, req4, mdio,
dfe led0, dfe led1
functions:
spi, asc, cgu, exin, stp, gpt, nmi, pci, ebu, mdio, dfe
xRX200:
mux groups:
exin0, exin1, exin2, exin3, exin4, ebu a23, ebu a24, ebu a25, ebu clk,
ebu cs1, ebu wait, nand ale, nand cs1, nand cle, nand rdy, nand rd,
spi_di, spi_do, spi_clk, spi_cs1, spi_cs2, spi_cs3, spi_cs4, spi_cs5,
spi_cs6, usif uart_rx, usif uart_tx, usif uart_rts, usif uart_cts,
usif uart_dtr, usif uart_dsr, usif uart_dcd, usif uart_ri, usif spi_di,
usif spi_do, usif spi_clk, usif spi_cs0, usif spi_cs1, usif spi_cs2,
stp, nmi, gpt1, gpt2, gpt3, clkout0, clkout1, clkout2, clkout3, gnt1,
gnt2, gnt3, gnt4, req1, req2, req3, req4, mdio, dfe led0, dfe led1,
gphy0 led0, gphy0 led1, gphy0 led2, gphy1 led0, gphy1 led1, gphy1 led2
functions:
spi, usif, cgu, exin, stp, gpt, nmi, pci, ebu, mdio, dfe, gphy
xRX300:
mux groups:
exin0, exin1, exin2, exin4, nand ale, nand cs0, nand cs1, nand cle,
nand rdy, nand rd, nand_d0, nand_d1, nand_d2, nand_d3, nand_d4, nand_d5,
nand_d6, nand_d7, nand_d1, nand wr, nand wp, nand se, spi_di, spi_do,
spi_clk, spi_cs1, spi_cs4, spi_cs6, usif uart_rx, usif uart_tx,
usif spi_di, usif spi_do, usif spi_clk, usif spi_cs0, stp, clkout2,
mdio, dfe led0, dfe led1, ephy0 led0, ephy0 led1, ephy1 led0, ephy1 led1
functions:
spi, usif, cgu, exin, stp, ebu, mdio, dfe, ephy
Definition of pin configurations:
Required subnode-properties:
- lantiq,pins : An array of strings. Each string contains the name of a pin.
Valid values for these names are listed below.
Optional subnode-properties:
- lantiq,pull: Integer, representing the pull-down/up to apply to the pin.
0: none, 1: down, 2: up.
- lantiq,open-drain: Boolean, enables open-drain on the defined pin.
Valid values for AMAZON pin names:
Pinconf pins can be referenced via the names io0-io31.
Valid values for DANUBE pin names:
Pinconf pins can be referenced via the names io0-io31.
Valid values for xRX100 pin names:
Pinconf pins can be referenced via the names io0-io55.
Valid values for xRX200 pin names:
Pinconf pins can be referenced via the names io0-io49.
Valid values for xRX300 pin names:
Pinconf pins can be referenced via the names io0-io1,io3-io6,io8-io11,
io13-io19,io23-io27,io34-io36,
io42-io43,io48-io61.
Example:
gpio: pinmux@e100b10 {
compatible = "lantiq,danube-pinctrl";
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
#gpio-cells = <2>;
gpio-controller;
reg = <0xE100B10 0xA0>;
state_default: pinmux {
stp {
lantiq,groups = "stp";
lantiq,function = "stp";
};
pci {
lantiq,groups = "gnt1";
lantiq,function = "pci";
};
conf_out {
lantiq,pins = "io4", "io5", "io6"; /* stp */
lantiq,open-drain;
lantiq,pull = <0>;
};
};
};
|
