blob: 9e8a16c44102925ea76e842bfde3186fd127571b (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
|
.. SPDX-License-Identifier: GPL-2.0+
========================================================
Linux Driver for the AMD/Pensando(R) DSC adapter family
========================================================
Copyright(c) 2023 Advanced Micro Devices, Inc
Identifying the Adapter
=======================
To find if one or more AMD/Pensando PCI Core devices are installed on the
host, check for the PCI devices::
# lspci -d 1dd8:100c
b5:00.0 Processing accelerators: Pensando Systems Device 100c
b6:00.0 Processing accelerators: Pensando Systems Device 100c
If such devices are listed as above, then the pds_core.ko driver should find
and configure them for use. There should be log entries in the kernel
messages such as these::
$ dmesg | grep pds_core
pds_core 0000:b5:00.0: 252.048 Gb/s available PCIe bandwidth (16.0 GT/s PCIe x16 link)
pds_core 0000:b5:00.0: FW: 1.60.0-73
pds_core 0000:b6:00.0: 252.048 Gb/s available PCIe bandwidth (16.0 GT/s PCIe x16 link)
pds_core 0000:b6:00.0: FW: 1.60.0-73
Driver and firmware version information can be gathered with devlink::
$ devlink dev info pci/0000:b5:00.0
pci/0000:b5:00.0:
driver pds_core
serial_number FLM18420073
versions:
fixed:
asic.id 0x0
asic.rev 0x0
running:
fw 1.51.0-73
stored:
fw.goldfw 1.15.9-C-22
fw.mainfwa 1.60.0-73
fw.mainfwb 1.60.0-57
Info versions
=============
The ``pds_core`` driver reports the following versions
.. list-table:: devlink info versions implemented
:widths: 5 5 90
* - Name
- Type
- Description
* - ``fw``
- running
- Version of firmware running on the device
* - ``fw.goldfw``
- stored
- Version of firmware stored in the goldfw slot
* - ``fw.mainfwa``
- stored
- Version of firmware stored in the mainfwa slot
* - ``fw.mainfwb``
- stored
- Version of firmware stored in the mainfwb slot
* - ``asic.id``
- fixed
- The ASIC type for this device
* - ``asic.rev``
- fixed
- The revision of the ASIC for this device
Parameters
==========
The ``pds_core`` driver implements the following generic
parameters for controlling the functionality to be made available
as auxiliary_bus devices.
.. list-table:: Generic parameters implemented
:widths: 5 5 8 82
* - Name
- Mode
- Type
- Description
* - ``enable_vnet``
- runtime
- Boolean
- Enables vDPA functionality through an auxiliary_bus device
Firmware Management
===================
The ``flash`` command can update a the DSC firmware. The downloaded firmware
will be saved into either of firmware bank 1 or bank 2, whichever is not
currently in use, and that bank will used for the next boot::
# devlink dev flash pci/0000:b5:00.0 \
file pensando/dsc_fw_1.63.0-22.tar
Health Reporters
================
The driver supports a devlink health reporter for FW status::
# devlink health show pci/0000:2b:00.0 reporter fw
pci/0000:2b:00.0:
reporter fw
state healthy error 0 recover 0
# devlink health diagnose pci/0000:2b:00.0 reporter fw
Status: healthy State: 1 Generation: 0 Recoveries: 0
Enabling the driver
===================
The driver is enabled via the standard kernel configuration system,
using the make command::
make oldconfig/menuconfig/etc.
The driver is located in the menu structure at:
-> Device Drivers
-> Network device support (NETDEVICES [=y])
-> Ethernet driver support
-> AMD devices
-> AMD/Pensando Ethernet PDS_CORE Support
Support
=======
For general Linux networking support, please use the netdev mailing
list, which is monitored by AMD/Pensando personnel::
netdev@vger.kernel.org
|