summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/broadcom/bcm53016-dlink-dwl-8610ap.dts
blob: c1f54391746fa36a5187d41efdc700637b4d88cf (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;

#include "bcm4709.dtsi"
#include "bcm5301x-nand-cs0-bch8.dtsi"
#include <dt-bindings/leds/common.h>
#include <dt-bindings/input/input.h>

/ {
	model = "D-Link DWL-8610AP";
	compatible = "dlink,dwl-8610ap", "brcm,bcm53016", "brcm,bcm4708";

	memory@0 {
		device_type = "memory";
		/* 512 MB RAM in 2 x Macronix D9PSH chips */
		reg = <0x00000000 0x08000000>,
		      <0x88000000 0x08000000>;
	};

	leds {
		compatible = "gpio-leds";

		led-power {
			function = LED_FUNCTION_POWER;
			color = <LED_COLOR_ID_GREEN>;
			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
			default-state = "on";
		};

		led-diag {
			/* Actually "diag" unclear what this means */
			function = LED_FUNCTION_INDICATOR;
			color = <LED_COLOR_ID_RED>;
			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
			default-state = "on";
			linux,default-trigger = "heartbeat";
		};

		led-wlan-2g {
			function = LED_FUNCTION_WLAN;
			color = <LED_COLOR_ID_GREEN>;
			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
		};

		led-wlan-5g {
			function = LED_FUNCTION_WLAN;
			color = <LED_COLOR_ID_GREEN>;
			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
		};
	};

	gpio_keys {
		compatible = "gpio-keys";

		button-reset {
			debounce-interval = <100>;
			wakeup-source;
			linux,code = <KEY_RESTART>;
			label = "reset";
			/* This GPIO is actually stored in NVRAM, but it's not gonna change */
			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
		};
	};

	/*
	 * Flash memory at 0x1e000000-0x1fffffff
	 * Macronix 32 64KB blocks; total size 2MB, same that can be
	 * found attached to the spi_nor SPI controller.
	 */
	nvram@1e080000 {
		compatible = "brcm,nvram";
		reg = <0x1e080000 0x00020000>;

		et0macaddr: et0macaddr {
		};

		et1macaddr: et1macaddr {
		};
	};
};

&gmac0 {
	nvmem-cells = <&et0macaddr>;
	nvmem-cell-names = "mac-address";
};

&gmac1 {
	nvmem-cells = <&et1macaddr>;
	nvmem-cell-names = "mac-address";
};

&spi_nor {
	/* Serial SPI NOR Flash MX 25L1606E */
	status = "okay";
};

&nandcs {
	/*
	 * Spansion S34ML01G100TFI00 128 MB NAND Flash memory
	 *
	 * This ECC is a bit unorthodox but it is what the stock firmware
	 * is using, so to be able to mount the original partitions
	 * this is necessary.
	 */
	nand-ecc-strength = <5>;
	partitions {
		compatible = "fixed-partitions";
		#address-cells = <1>;
		#size-cells = <1>;

		/* This is named nflash1.trx in CFE */
		trx@0 {
			label = "firmware";
			reg = <0x00000000 0x02800000>;
			compatible = "brcm,trx";
		};

		/* This is named nflash1.trx2 in CFE */
		trx2@2800000 {
			label = "firmware2";
			reg = <0x02800000 0x02800000>;
			compatible = "brcm,trx";
		};

		/* This is named nflash1.rwfs in CFE */
		free@5000000 {
			label = "free";
			reg = <0x05000000 0x03000000>;
		};
	};
};