path: root/arch/parisc/include/uapi/asm/pdc.h

/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
#ifndef _UAPI_PARISC_PDC_H
#define _UAPI_PARISC_PDC_H

/*
 *	PDC return values ...
 *	All PDC calls return a subset of these errors.
 */

#define PDC_WARN		  3	/* Call completed with a warning */
#define PDC_REQ_ERR_1		  2	/* See above			 */
#define PDC_REQ_ERR_0		  1	/* Call would generate a requestor error */
#define PDC_OK			  0	/* Call completed successfully	*/
#define PDC_BAD_PROC		 -1	/* Called non-existent procedure*/
#define PDC_BAD_OPTION		 -2	/* Called with non-existent option */
#define PDC_ERROR		 -3	/* Call could not complete without an error */
#define PDC_NE_MOD		 -5	/* Module not found		*/
#define PDC_NE_CELL_MOD		 -7	/* Cell module not found	*/
#define PDC_NE_BOOTDEV		 -9	/* Cannot locate a console device or boot device */
#define PDC_INVALID_ARG		-10	/* Called with an invalid argument */
#define PDC_BUS_POW_WARN	-12	/* Call could not complete in allowed power budget */
#define PDC_NOT_NARROW		-17	/* Narrow mode not supported	*/

/*
 *	PDC entry points...
 */

#define PDC_POW_FAIL	1		/* perform a power-fail		*/
#define PDC_POW_FAIL_PREPARE	0	/* prepare for powerfail	*/

#define PDC_CHASSIS	2		/* PDC-chassis functions	*/
#define PDC_CHASSIS_DISP	0	/* update chassis display	*/
#define PDC_CHASSIS_WARN	1	/* return chassis warnings	*/
#define PDC_CHASSIS_DISPWARN	2	/* update&return chassis status */
#define PDC_RETURN_CHASSIS_INFO 128	/* HVERSION dependent: return chassis LED/LCD info  */

#define PDC_PIM         3               /* Get PIM data                 */
#define PDC_PIM_HPMC            0       /* Transfer HPMC data           */
#define PDC_PIM_RETURN_SIZE     1       /* Get Max buffer needed for PIM*/
#define PDC_PIM_LPMC            2       /* Transfer HPMC data           */
#define PDC_PIM_SOFT_BOOT       3       /* Transfer Soft Boot data      */
#define PDC_PIM_TOC             4       /* Transfer TOC data            */

#define PDC_MODEL	4		/* PDC model information call	*/
#define PDC_MODEL_INFO		0	/* returns information 		*/
#define PDC_MODEL_BOOTID	1	/* set the BOOT_ID		*/
#define PDC_MODEL_VERSIONS	2	/* returns cpu-internal versions*/
#define PDC_MODEL_SYSMODEL	3	/* return system model info	*/
#define PDC_MODEL_ENSPEC	4	/* enable specific option	*/
#define PDC_MODEL_DISPEC	5	/* disable specific option	*/
#define PDC_MODEL_CPU_ID	6	/* returns cpu-id (only newer machines!) */
#define PDC_MODEL_CAPABILITIES	7	/* returns OS32/OS64-flags	*/
/* Values for PDC_MODEL_CAPABILITIES non-equivalent virtual aliasing support */
#define  PDC_MODEL_OS64			(1 << 0)
#define  PDC_MODEL_OS32			(1 << 1)
#define  PDC_MODEL_IOPDIR_FDC		(1 << 2)
#define  PDC_MODEL_NVA_MASK		(3 << 4)
#define  PDC_MODEL_NVA_SUPPORTED	(0 << 4)
#define  PDC_MODEL_NVA_SLOW		(1 << 4)
#define  PDC_MODEL_NVA_UNSUPPORTED	(3 << 4)
#define PDC_MODEL_FIRM_TEST_GET	8	/* returns boot test options	*/
#define PDC_MODEL_FIRM_TEST_SET	9	/* set boot test options	*/
#define PDC_MODEL_GET_PLATFORM_INFO 10	/* returns platform info	*/
#define PDC_MODEL_GET_INSTALL_KERNEL 11	/* returns kernel for installation */

#define PA89_INSTRUCTION_SET	0x4	/* capabilities returned	*/
#define PA90_INSTRUCTION_SET	0x8

#define PDC_CACHE	5		/* return/set cache (& TLB) info*/
#define PDC_CACHE_INFO		0	/* returns information 		*/
#define PDC_CACHE_SET_COH	1	/* set coherence state		*/
#define PDC_CACHE_RET_SPID	2	/* returns space-ID bits	*/

#define PDC_HPA		6		/* return HPA of processor	*/
#define PDC_HPA_PROCESSOR	0
#define PDC_HPA_MODULES		1

#define PDC_COPROC	7		/* Co-Processor (usually FP unit(s)) */
#define PDC_COPROC_CFG		0	/* Co-Processor Cfg (FP unit(s) enabled?) */

#define PDC_IODC	8		/* talk to IODC			*/
#define PDC_IODC_READ		0	/* read IODC entry point	*/
/*      PDC_IODC_RI_			 * INDEX parameter of PDC_IODC_READ */
#define PDC_IODC_RI_DATA_BYTES	0	/* IODC Data Bytes		*/
/*				1, 2	   obsolete - HVERSION dependent*/
#define PDC_IODC_RI_INIT	3	/* Initialize module		*/
#define PDC_IODC_RI_IO		4	/* Module input/output		*/
#define PDC_IODC_RI_SPA		5	/* Module input/output		*/
#define PDC_IODC_RI_CONFIG	6	/* Module input/output		*/
/*				7	  obsolete - HVERSION dependent */
#define PDC_IODC_RI_TEST	8	/* Module input/output		*/
#define PDC_IODC_RI_TLB		9	/* Module input/output		*/
#define PDC_IODC_NINIT		2	/* non-destructive init		*/
#define PDC_IODC_DINIT		3	/* destructive init		*/
#define PDC_IODC_MEMERR		4	/* check for memory errors	*/
#define PDC_IODC_INDEX_DATA	0	/* get first 16 bytes from mod IODC */
#define PDC_IODC_BUS_ERROR	-4	/* bus error return value	*/
#define PDC_IODC_INVALID_INDEX	-5	/* invalid index return value	*/
#define PDC_IODC_COUNT		-6	/* count is too small		*/

#define PDC_TOD		9		/* time-of-day clock (TOD)	*/
#define PDC_TOD_READ		0	/* read TOD			*/
#define PDC_TOD_WRITE		1	/* write TOD			*/
#define PDC_TOD_CALIBRATE	2	/* calibrate timers		*/

#define PDC_STABLE	10		/* stable storage (sprockets)	*/
#define PDC_STABLE_READ		0
#define PDC_STABLE_WRITE	1
#define PDC_STABLE_RETURN_SIZE	2
#define PDC_STABLE_VERIFY_CONTENTS 3
#define PDC_STABLE_INITIALIZE	4

#define PDC_NVOLATILE	11		/* often not implemented	*/
#define PDC_NVOLATILE_READ	0
#define PDC_NVOLATILE_WRITE	1
#define PDC_NVOLATILE_RETURN_SIZE 2
#define PDC_NVOLATILE_VERIFY_CONTENTS 3
#define PDC_NVOLATILE_INITIALIZE 4

#define PDC_ADD_VALID	12		/* Memory validation PDC call	*/
#define PDC_ADD_VALID_VERIFY	0	/* Make PDC_ADD_VALID verify region */

#define PDC_DEBUG	14		/* Obsolete			*/

#define PDC_INSTR	15		/* get instr to invoke PDCE_CHECK() */

#define PDC_PROC	16		/* (sprockets)			*/

#define PDC_CONFIG	17		/* (sprockets)			*/
#define PDC_CONFIG_DECONFIG	0
#define PDC_CONFIG_DRECONFIG	1
#define PDC_CONFIG_DRETURN_CONFIG 2

#define PDC_BLOCK_TLB	18		/* manage hardware block-TLB	*/
#define PDC_BTLB_INFO		0	/* returns parameter 		*/
#define PDC_BTLB_INSERT		1	/* insert BTLB entry		*/
#define PDC_BTLB_PURGE		2	/* purge BTLB entries 		*/
#define PDC_BTLB_PURGE_ALL	3	/* purge all BTLB entries 	*/

#define PDC_TLB		19		/* manage hardware TLB miss handling */
#define PDC_TLB_INFO		0	/* returns parameter 		*/
#define PDC_TLB_SETUP		1	/* set up miss handling 	*/

#define PDC_MEM		20		/* Manage memory		*/
#define PDC_MEM_MEMINFO		0	/* Return PDT info		*/
#define PDC_MEM_ADD_PAGE	1	/* Add page to PDT		*/
#define PDC_MEM_CLEAR_PDT	2	/* Clear PDT			*/
#define PDC_MEM_READ_PDT	3	/* Read PDT entry		*/
#define PDC_MEM_RESET_CLEAR	4	/* Reset PDT clear flag		*/
#define PDC_MEM_GOODMEM		5	/* Set good_mem value		*/
#define PDC_MEM_TABLE		128	/* Non contig mem map (sprockets) */
#define PDC_MEM_RETURN_ADDRESS_TABLE	PDC_MEM_TABLE
#define PDC_MEM_GET_MEMORY_SYSTEM_TABLES_SIZE	131
#define PDC_MEM_GET_MEMORY_SYSTEM_TABLES	132
#define PDC_MEM_GET_PHYSICAL_LOCATION_FROM_MEMORY_ADDRESS 133

#define PDC_MEM_RET_SBE_REPLACED	5	/* PDC_MEM return values */
#define PDC_MEM_RET_DUPLICATE_ENTRY	4
#define PDC_MEM_RET_BUF_SIZE_SMALL	1
#define PDC_MEM_RET_PDT_FULL		-11
#define PDC_MEM_RET_INVALID_PHYSICAL_LOCATION ~0ULL

#define PDC_PSW		21		/* Get/Set default System Mask  */
#define PDC_PSW_MASK		0	/* Return mask                  */
#define PDC_PSW_GET_DEFAULTS	1	/* Return defaults              */
#define PDC_PSW_SET_DEFAULTS	2	/* Set default                  */
#define PDC_PSW_ENDIAN_BIT	1	/* set for big endian           */
#define PDC_PSW_WIDE_BIT	2	/* set for wide mode            */

#define PDC_SYSTEM_MAP	22		/* find system modules		*/
#define PDC_FIND_MODULE 	0
#define PDC_FIND_ADDRESS	1
#define PDC_TRANSLATE_PATH	2

#define PDC_SOFT_POWER	23		/* soft power switch		*/
#define PDC_SOFT_POWER_INFO	0	/* return info about the soft power switch */
#define PDC_SOFT_POWER_ENABLE	1	/* enable/disable soft power switch */

#define PDC_ALLOC	24		/* allocate static storage for PDC & IODC */

#define PDC_CRASH_PREP	25		/* Prepare system for crash dump */
#define PDC_CRASH_DUMP		0	/* Do platform specific preparations for dump */
#define PDC_CRASH_LOG_CEC_ERROR 1	/* Dump hardware registers	*/

#define PDC_SCSI_PARMS	26		/* Get and set SCSI parameters	*/
#define PDC_SCSI_GET_PARMS	0	/* Get SCSI parameters for I/O device */
#define PDC_SCSI_SET_PARMS	1	/* Set SCSI parameters for I/O device */

/* HVERSION dependent */

/* The PDC_MEM_MAP calls */
#define PDC_MEM_MAP	128		/* on s700: return page info	*/
#define PDC_MEM_MAP_HPA		0	/* returns hpa of a module	*/

#define PDC_EEPROM	129		/* EEPROM access		*/
#define PDC_EEPROM_READ_WORD	0
#define PDC_EEPROM_WRITE_WORD	1
#define PDC_EEPROM_READ_BYTE	2
#define PDC_EEPROM_WRITE_BYTE	3
#define PDC_EEPROM_EEPROM_PASSWORD -1000

#define PDC_NVM		130		/* NVM (non-volatile memory) access */
#define PDC_NVM_READ_WORD	0
#define PDC_NVM_WRITE_WORD	1
#define PDC_NVM_READ_BYTE	2
#define PDC_NVM_WRITE_BYTE	3

#define PDC_SEED_ERROR	132		/* (sprockets)			*/

#define PDC_IO		135		/* log error info, reset IO system */
#define PDC_IO_READ_AND_CLEAR_ERRORS	0
#define PDC_IO_RESET			1
#define PDC_IO_RESET_DEVICES		2
/* sets bits 6&7 (little endian) of the HcControl Register */
#define PDC_IO_USB_SUSPEND	0xC000000000000000
#define PDC_IO_EEPROM_IO_ERR_TABLE_FULL	-5	/* return value */
#define PDC_IO_NO_SUSPEND		-6	/* return value */

#define PDC_BROADCAST_RESET 136		/* reset all processors		*/
#define PDC_DO_RESET		0	/* option: perform a broadcast reset */
#define PDC_DO_FIRM_TEST_RESET	1	/* Do broadcast reset with bitmap */
#define PDC_BR_RECONFIGURATION	2	/* reset w/reconfiguration	*/
#define PDC_FIRM_TEST_MAGIC	0xab9ec36fUL    /* for this reboot only	*/

#define PDC_LAN_STATION_ID 138		/* Hversion dependent mechanism for */
#define PDC_LAN_STATION_ID_READ	0	/* getting the lan station address  */

#define	PDC_LAN_STATION_ID_SIZE	6

#define PDC_CHECK_RANGES 139		/* (sprockets)			*/

#define PDC_NV_SECTIONS	141		/* (sprockets)			*/

#define PDC_PERFORMANCE	142		/* performance monitoring	*/

#define PDC_SYSTEM_INFO	143		/* system information		*/
#define PDC_SYSINFO_RETURN_INFO_SIZE	0
#define PDC_SYSINFO_RRETURN_SYS_INFO	1
#define PDC_SYSINFO_RRETURN_ERRORS	2
#define PDC_SYSINFO_RRETURN_WARNINGS	3
#define PDC_SYSINFO_RETURN_REVISIONS	4
#define PDC_SYSINFO_RRETURN_DIAGNOSE	5
#define PDC_SYSINFO_RRETURN_HV_DIAGNOSE	1005

#define PDC_RDR		144		/* (sprockets)			*/
#define PDC_RDR_READ_BUFFER	0
#define PDC_RDR_READ_SINGLE	1
#define PDC_RDR_WRITE_SINGLE	2

#define PDC_INTRIGUE	145 		/* (sprockets)			*/
#define PDC_INTRIGUE_WRITE_BUFFER 	 0
#define PDC_INTRIGUE_GET_SCRATCH_BUFSIZE 1
#define PDC_INTRIGUE_START_CPU_COUNTERS	 2
#define PDC_INTRIGUE_STOP_CPU_COUNTERS	 3

#define PDC_STI		146 		/* STI access			*/
/* same as PDC_PCI_XXX values (see below) */

/* Legacy PDC definitions for same stuff */
#define PDC_PCI_INDEX	147
#define PDC_PCI_INTERFACE_INFO		0
#define PDC_PCI_SLOT_INFO		1
#define PDC_PCI_INFLIGHT_BYTES		2
#define PDC_PCI_READ_CONFIG		3
#define PDC_PCI_WRITE_CONFIG		4
#define PDC_PCI_READ_PCI_IO		5
#define PDC_PCI_WRITE_PCI_IO		6
#define PDC_PCI_READ_CONFIG_DELAY	7
#define PDC_PCI_UPDATE_CONFIG_DELAY	8
#define PDC_PCI_PCI_PATH_TO_PCI_HPA	9
#define PDC_PCI_PCI_HPA_TO_PCI_PATH	10
#define PDC_PCI_PCI_PATH_TO_PCI_BUS	11
#define PDC_PCI_PCI_RESERVED		12
#define PDC_PCI_PCI_INT_ROUTE_SIZE	13
#define PDC_PCI_GET_INT_TBL_SIZE	PDC_PCI_PCI_INT_ROUTE_SIZE
#define PDC_PCI_PCI_INT_ROUTE		14
#define PDC_PCI_GET_INT_TBL		PDC_PCI_PCI_INT_ROUTE
#define PDC_PCI_READ_MON_TYPE		15
#define PDC_PCI_WRITE_MON_TYPE		16

#define PDC_RELOCATE	149		/* (sprockets)			*/
#define PDC_RELOCATE_GET_RELOCINFO	0
#define PDC_RELOCATE_CHECKSUM		1
#define PDC_RELOCATE_RELOCATE		2

/* Get SCSI Interface Card info:  SDTR, SCSI ID, mode (SE vs LVD) */
#define PDC_INITIATOR	163
#define PDC_GET_INITIATOR	0
#define PDC_SET_INITIATOR	1
#define PDC_DELETE_INITIATOR	2
#define PDC_RETURN_TABLE_SIZE	3
#define PDC_RETURN_TABLE	4

#define PDC_LINK	165 		/* (sprockets)			*/
#define PDC_LINK_PCI_ENTRY_POINTS	0  /* list (Arg1) = 0 */
#define PDC_LINK_USB_ENTRY_POINTS	1  /* list (Arg1) = 1 */

/* cl_class
 * page 3-33 of IO-Firmware ARS
 * IODC ENTRY_INIT(Search first) RET[1]
 */
#define	CL_NULL		0	/* invalid */
#define	CL_RANDOM	1	/* random access (as disk) */
#define	CL_SEQU		2	/* sequential access (as tape) */
#define	CL_DUPLEX	7	/* full-duplex point-to-point (RS-232, Net) */
#define	CL_KEYBD	8	/* half-duplex console (HIL Keyboard) */
#define	CL_DISPL	9	/* half-duplex console (display) */
#define	CL_FC		10	/* FiberChannel access media */

/* IODC ENTRY_INIT() */
#define ENTRY_INIT_SRCH_FRST	2
#define ENTRY_INIT_SRCH_NEXT	3
#define ENTRY_INIT_MOD_DEV	4
#define ENTRY_INIT_DEV		5
#define ENTRY_INIT_MOD		6
#define ENTRY_INIT_MSG		9

/* IODC ENTRY_IO() */
#define ENTRY_IO_BOOTIN		0
#define ENTRY_IO_BOOTOUT	1
#define ENTRY_IO_CIN		2
#define ENTRY_IO_COUT		3
#define ENTRY_IO_CLOSE		4
#define ENTRY_IO_GETMSG		9
#define ENTRY_IO_BBLOCK_IN	16
#define ENTRY_IO_BBLOCK_OUT	17

/* IODC ENTRY_SPA() */

/* IODC ENTRY_CONFIG() */

/* IODC ENTRY_TEST() */

/* IODC ENTRY_TLB() */

/* constants for OS (NVM...) */
#define OS_ID_NONE		0	/* Undefined OS ID	*/
#define OS_ID_HPUX		1	/* HP-UX OS		*/
#define OS_ID_MPEXL		2	/* MPE XL OS		*/
#define OS_ID_OSF		3	/* OSF OS		*/
#define OS_ID_HPRT		4	/* HP-RT OS		*/
#define OS_ID_NOVEL		5	/* NOVELL OS		*/
#define OS_ID_LINUX		6	/* Linux		*/


/* constants for PDC_CHASSIS */
#define OSTAT_OFF		0
#define OSTAT_FLT		1
#define OSTAT_TEST		2
#define OSTAT_INIT		3
#define OSTAT_SHUT		4
#define OSTAT_WARN		5
#define OSTAT_RUN		6
#define OSTAT_ON		7

/* Page Zero constant offsets used by the HPMC handler */
#define BOOT_CONSOLE_HPA_OFFSET  0x3c0
#define BOOT_CONSOLE_SPA_OFFSET  0x3c4
#define BOOT_CONSOLE_PATH_OFFSET 0x3a8

/* size of the pdc_result buffer for firmware.c */
#define NUM_PDC_RESULT	32

#if !defined(__ASSEMBLY__)

/* flags for hardware_path */
#define	PF_AUTOBOOT	0x80
#define	PF_AUTOSEARCH	0x40
#define	PF_TIMER	0x0F

struct hardware_path {
	unsigned char flags;	/* see bit definitions below */
	signed   char bc[6];	/* Bus Converter routing info to a specific */
				/* I/O adaptor (< 0 means none, > 63 resvd) */
	signed   char mod;	/* fixed field of specified module */
};

struct pdc_module_path {	/* page 1-69 */
	struct hardware_path path;
	unsigned int layers[6]; /* device-specific info (ctlr #, unit # ...) */
} __attribute__((aligned(8)));

struct pz_device {
	struct pdc_module_path dp;	/* see above */
	/* struct	iomod *hpa; */
	unsigned int hpa;	/* HPA base address */
	/* char	*spa; */
	unsigned int spa;	/* SPA base address */
	/* int	(*iodc_io)(struct iomod*, ...); */
	unsigned int iodc_io;	/* device entry point */
	short	pad;		/* reserved */
	unsigned short cl_class;/* see below */
} __attribute__((aligned(8))) ;

struct zeropage {
	/* [0x000] initialize vectors (VEC) */
	unsigned int	vec_special;		/* must be zero */
	/* int	(*vec_pow_fail)(void);*/
	unsigned int	vec_pow_fail; /* power failure handler */
	/* int	(*vec_toc)(void); */
	unsigned int	vec_toc;
	unsigned int	vec_toclen;
	/* int	(*vec_rendz)(void); */
	unsigned int vec_rendz;
	int	vec_pow_fail_flen;
	int	vec_pad0[3];
	unsigned int vec_toc_hi;
	int	vec_pad1[6];

	/* [0x040] reserved processor dependent */
	int	pad0[112];              /* in QEMU pad0[0] holds "SeaBIOS\0" */

	/* [0x200] reserved */
	int	pad1[84];

	/* [0x350] memory configuration (MC) */
	int	memc_cont;		/* contiguous mem size (bytes) */
	int	memc_phsize;		/* physical memory size */
	int	memc_adsize;		/* additional mem size, bytes of SPA space used by PDC */
	unsigned int mem_pdc_hi;	/* used for 64-bit */

	/* [0x360] various parameters for the boot-CPU */
	/* unsigned int *mem_booterr[8]; */
	unsigned int mem_booterr[8];	/* ptr to boot errors */
	unsigned int mem_free;		/* first location, where OS can be loaded */
	/* struct iomod *mem_hpa; */
	unsigned int mem_hpa;		/* HPA of the boot-CPU */
	/* int (*mem_pdc)(int, ...); */
	unsigned int mem_pdc;		/* PDC entry point */
	unsigned int mem_10msec;	/* number of clock ticks in 10msec */

	/* [0x390] initial memory module (IMM) */
	/* struct iomod *imm_hpa; */
	unsigned int imm_hpa;		/* HPA of the IMM */
	int	imm_soft_boot;		/* 0 = was hard boot, 1 = was soft boot */
	unsigned int	imm_spa_size;		/* SPA size of the IMM in bytes */
	unsigned int	imm_max_mem;		/* bytes of mem in IMM */

	/* [0x3A0] boot console, display device and keyboard */
	struct pz_device mem_cons;	/* description of console device */
	struct pz_device mem_boot;	/* description of boot device */
	struct pz_device mem_kbd;	/* description of keyboard device */

	/* [0x430] reserved */
	int	pad430[116];

	/* [0x600] processor dependent */
	unsigned int pad600[1];
	unsigned int proc_sti;		/* pointer to STI ROM */
	unsigned int pad608[126];
};

struct pdc_chassis_info {       /* for PDC_CHASSIS_INFO */
	unsigned long actcnt;   /* actual number of bytes returned */
	unsigned long maxcnt;   /* maximum number of bytes that could be returned */
};

struct pdc_coproc_cfg {         /* for PDC_COPROC_CFG */
        unsigned long ccr_functional;
        unsigned long ccr_present;
        unsigned long revision;
        unsigned long model;
};

struct pdc_model {		/* for PDC_MODEL */
	unsigned long hversion;
	unsigned long sversion;
	unsigned long hw_id;
	unsigned long boot_id;
	unsigned long sw_id;
	unsigned long sw_cap;
	unsigned long arch_rev;
	unsigned long pot_key;
	unsigned long curr_key;
	unsigned long width;	/* default of PSW_W bit (1=enabled) */
};

struct pdc_cache_cf {		/* for PDC_CACHE  (I/D-caches) */
    unsigned long
#ifdef __LP64__
		cc_padW:32,
#endif
		cc_alias: 4,	/* alias boundaries for virtual addresses   */
		cc_block: 4,	/* to determine most efficient stride */
		cc_line	: 3,	/* maximum amount written back as a result of store (multiple of 16 bytes) */
		cc_shift: 2,	/* how much to shift cc_block left */
		cc_wt	: 1,	/* 0 = WT-Dcache, 1 = WB-Dcache */
		cc_sh	: 2,	/* 0 = separate I/D-cache, else shared I/D-cache */
		cc_cst  : 3,	/* 0 = incoherent D-cache, 1=coherent D-cache */
		cc_pad1 : 10,	/* reserved */
		cc_hv   : 3;	/* hversion dependent */
};

struct pdc_tlb_cf {		/* for PDC_CACHE (I/D-TLB's) */
    unsigned long tc_pad0:12,	/* reserved */
#ifdef __LP64__
		tc_padW:32,
#endif
		tc_sh	: 2,	/* 0 = separate I/D-TLB, else shared I/D-TLB */
		tc_hv   : 1,	/* HV */
		tc_page : 1,	/* 0 = 2K page-size-machine, 1 = 4k page size */
		tc_cst  : 3,	/* 0 = incoherent operations, else coherent operations */
		tc_aid  : 5,	/* ITLB: width of access ids of processor (encoded!) */
		tc_sr   : 8;	/* ITLB: width of space-registers (encoded) */
};

struct pdc_cache_info {		/* main-PDC_CACHE-structure (caches & TLB's) */
	/* I-cache */
	unsigned long	ic_size;	/* size in bytes */
	struct pdc_cache_cf ic_conf;	/* configuration */
	unsigned long	ic_base;	/* base-addr */
	unsigned long	ic_stride;
	unsigned long	ic_count;
	unsigned long	ic_loop;
	/* D-cache */
	unsigned long	dc_size;	/* size in bytes */
	struct pdc_cache_cf dc_conf;	/* configuration */
	unsigned long	dc_base;	/* base-addr */
	unsigned long	dc_stride;
	unsigned long	dc_count;
	unsigned long	dc_loop;
	/* Instruction-TLB */
	unsigned long	it_size;	/* number of entries in I-TLB */
	struct pdc_tlb_cf it_conf;	/* I-TLB-configuration */
	unsigned long	it_sp_base;
	unsigned long	it_sp_stride;
	unsigned long	it_sp_count;
	unsigned long	it_off_base;
	unsigned long	it_off_stride;
	unsigned long	it_off_count;
	unsigned long	it_loop;
	/* data-TLB */
	unsigned long	dt_size;	/* number of entries in D-TLB */
	struct pdc_tlb_cf dt_conf;	/* D-TLB-configuration */
	unsigned long	dt_sp_base;
	unsigned long	dt_sp_stride;
	unsigned long	dt_sp_count;
	unsigned long	dt_off_base;
	unsigned long	dt_off_stride;
	unsigned long	dt_off_count;
	unsigned long	dt_loop;
};

/* Might need adjustment to work with 64-bit firmware */
struct pdc_iodc {     /* PDC_IODC */
	unsigned char   hversion_model;
	unsigned char 	hversion;
	unsigned char 	spa;
	unsigned char 	type;
	unsigned int	sversion_rev:4;
	unsigned int	sversion_model:19;
	unsigned int	sversion_opt:8;
	unsigned char	rev;
	unsigned char	dep;
	unsigned char	features;
	unsigned char	pad1;
	unsigned int	checksum:16;
	unsigned int	length:16;
	unsigned int    pad[15];
} __attribute__((aligned(8))) ;

/* no BLTBs in pa2.0 processors */
struct pdc_btlb_info_range {
	unsigned char res00;
	unsigned char num_i;
	unsigned char num_d;
	unsigned char num_comb;
};

struct pdc_btlb_info {	/* PDC_BLOCK_TLB, return of PDC_BTLB_INFO */
	unsigned int min_size;	/* minimum size of BTLB in pages */
	unsigned int max_size;	/* maximum size of BTLB in pages */
	struct pdc_btlb_info_range fixed_range_info;
	struct pdc_btlb_info_range variable_range_info;
};

struct pdc_mem_retinfo { /* PDC_MEM/PDC_MEM_MEMINFO (return info) */
	unsigned long pdt_size;
	unsigned long pdt_entries;
	unsigned long pdt_status;
	unsigned long first_dbe_loc;
	unsigned long good_mem;
};

struct pdc_mem_read_pdt { /* PDC_MEM/PDC_MEM_READ_PDT (return info) */
	unsigned long pdt_entries;
};

#ifdef __LP64__
struct pdc_memory_table_raddr { /* PDC_MEM/PDC_MEM_TABLE (return info) */
	unsigned long entries_returned;
	unsigned long entries_total;
};

struct pdc_memory_table {       /* PDC_MEM/PDC_MEM_TABLE (arguments) */
	unsigned long paddr;
	unsigned int  pages;
	unsigned int  reserved;
};
#endif /* __LP64__ */

struct pdc_system_map_mod_info { /* PDC_SYSTEM_MAP/FIND_MODULE */
	unsigned long mod_addr;
	unsigned long mod_pgs;
	unsigned long add_addrs;
};

struct pdc_system_map_addr_info { /* PDC_SYSTEM_MAP/FIND_ADDRESS */
	unsigned long mod_addr;
	unsigned long mod_pgs;
};

struct pdc_relocate_info_block {   /* PDC_RELOCATE_INFO */
	unsigned long pdc_size;
	unsigned long pdc_alignment;
	unsigned long pdc_address;
};

struct pdc_initiator { /* PDC_INITIATOR */
	int host_id;
	int factor;
	int width;
	int mode;
};

/* Only used on some pre-PA2.0 boxes */
struct pdc_memory_map {		/* PDC_MEMORY_MAP */
	unsigned long hpa;	/* mod's register set address */
	unsigned long more_pgs;	/* number of additional I/O pgs */
};

struct pdc_tod {
	unsigned long tod_sec;
	unsigned long tod_usec;
};

/* architected results from PDC_PIM/transfer hpmc on a PA1.1 machine */

struct pdc_hpmc_pim_11 { /* PDC_PIM */
	unsigned int gr[32];
	unsigned int cr[32];
	unsigned int sr[8];
	unsigned int iasq_back;
	unsigned int iaoq_back;
	unsigned int check_type;
	unsigned int cpu_state;
	unsigned int rsvd1;
	unsigned int cache_check;
	unsigned int tlb_check;
	unsigned int bus_check;
	unsigned int assists_check;
	unsigned int rsvd2;
	unsigned int assist_state;
	unsigned int responder_addr;
	unsigned int requestor_addr;
	unsigned int path_info;
	unsigned long long fr[32];
};

/*
 * architected results from PDC_PIM/transfer hpmc on a PA2.0 machine
 *
 * Note that PDC_PIM doesn't care whether or not wide mode was enabled
 * so the results are different on  PA1.1 vs. PA2.0 when in narrow mode.
 *
 * Note also that there are unarchitected results available, which
 * are hversion dependent. Do a "ser pim 0 hpmc" after rebooting, since
 * the firmware is probably the best way of printing hversion dependent
 * data.
 */

struct pdc_hpmc_pim_20 { /* PDC_PIM */
	unsigned long long gr[32];
	unsigned long long cr[32];
	unsigned long long sr[8];
	unsigned long long iasq_back;
	unsigned long long iaoq_back;
	unsigned int check_type;
	unsigned int cpu_state;
	unsigned int cache_check;
	unsigned int tlb_check;
	unsigned int bus_check;
	unsigned int assists_check;
	unsigned int assist_state;
	unsigned int path_info;
	unsigned long long responder_addr;
	unsigned long long requestor_addr;
	unsigned long long fr[32];
};

struct pim_cpu_state_cf {
	union {
	unsigned int
		iqv : 1,	/* IIA queue Valid */
		iqf : 1,	/* IIA queue Failure */
		ipv : 1,	/* IPRs Valid */
		grv : 1,	/* GRs Valid */
		crv : 1,	/* CRs Valid */
		srv : 1,	/* SRs Valid */
		trv : 1,	/* CR24 through CR31 valid */
		pad : 24,	/* reserved */
		td  : 1;	/* TOC did not cause any damage to the system state */
	unsigned int val;
	};
};

struct pdc_toc_pim_11 {
	unsigned int gr[32];
	unsigned int cr[32];
	unsigned int sr[8];
	unsigned int iasq_back;
	unsigned int iaoq_back;
	unsigned int check_type;
	struct pim_cpu_state_cf cpu_state;
};

struct pdc_toc_pim_20 {
	unsigned long long gr[32];
	unsigned long long cr[32];
	unsigned long long sr[8];
	unsigned long long iasq_back;
	unsigned long long iaoq_back;
	unsigned int check_type;
	struct pim_cpu_state_cf cpu_state;
};

/* for SpeedyBoot/firm_ctl funtionality */
struct pdc_firm_test_get_rtn_block {   /* PDC_MODEL/PDC_FIRM_TEST_GET */
	unsigned long current_tests;   /* u_R_addr Raddr_ints[0]  */
	unsigned long tests_supported; /* u_R_addr Raddr_ints[1]  */
	unsigned long default_tests;   /* u_R_addr Raddr_ints[2]  */
};

#define TORNADO_CPU_ID		0xB
#define PCXL_CPU_ID		0xD
#define PCXU_CPU_ID		0xE	/* U and U+ for all but C-class with bug */
#define VR_CPU_ID		0xF
#define PCXU_PLUS_CPU_ID	0x10	/* U+ only on C-class with bug */
#define PCXW_CPU_ID		0x11
#define PCXW_PLUS_CPU_ID	0x12
#define PIRANHA_CPU_ID		0x13
#define MAKO_CPU_ID		0x14

#endif /* !defined(__ASSEMBLY__) */

#endif /* _UAPI_PARISC_PDC_H */