1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
|
From: Thomas Gleixner <tglx@linutronix.de>
Date: Thu, 14 Sep 2023 20:44:21 +0206
Subject: [PATCH 064/134] serial: stm32: Use port lock wrappers
Origin: https://www.kernel.org/pub/linux/kernel/projects/rt/6.6/older/patches-6.6.7-rt18.tar.xz
When a serial port is used for kernel console output, then all
modifications to the UART registers which are done from other contexts,
e.g. getty, termios, are interference points for the kernel console.
So far this has been ignored and the printk output is based on the
principle of hope. The rework of the console infrastructure which aims to
support threaded and atomic consoles, requires to mark sections which
modify the UART registers as unsafe. This allows the atomic write function
to make informed decisions and eventually to restore operational state. It
also allows to prevent the regular UART code from modifying UART registers
while printk output is in progress.
All modifications of UART registers are guarded by the UART port lock,
which provides an obvious synchronization point with the console
infrastructure.
To avoid adding this functionality to all UART drivers, wrap the
spin_[un]lock*() invocations for uart_port::lock into helper functions
which just contain the spin_[un]lock*() invocations for now. In a
subsequent step these helpers will gain the console synchronization
mechanisms.
Converted with coccinelle. No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Link: https://lore.kernel.org/r/20230914183831.587273-65-john.ogness@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
---
drivers/tty/serial/stm32-usart.c | 38 +++++++++++++++++++-------------------
1 file changed, 19 insertions(+), 19 deletions(-)
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -537,7 +537,7 @@ static void stm32_usart_rx_dma_complete(
unsigned int size;
unsigned long flags;
- spin_lock_irqsave(&port->lock, flags);
+ uart_port_lock_irqsave(port, &flags);
size = stm32_usart_receive_chars(port, false);
uart_unlock_and_check_sysrq_irqrestore(port, flags);
if (size)
@@ -643,9 +643,9 @@ static void stm32_usart_tx_dma_complete(
stm32_usart_tx_dma_terminate(stm32port);
/* Let's see if we have pending data to send */
- spin_lock_irqsave(&port->lock, flags);
+ uart_port_lock_irqsave(port, &flags);
stm32_usart_transmit_chars(port);
- spin_unlock_irqrestore(&port->lock, flags);
+ uart_port_unlock_irqrestore(port, flags);
}
static void stm32_usart_tx_interrupt_enable(struct uart_port *port)
@@ -889,7 +889,7 @@ static irqreturn_t stm32_usart_interrupt
if (!stm32_port->throttled) {
if (((sr & USART_SR_RXNE) && !stm32_usart_rx_dma_started(stm32_port)) ||
((sr & USART_SR_ERR_MASK) && stm32_usart_rx_dma_started(stm32_port))) {
- spin_lock(&port->lock);
+ uart_port_lock(port);
size = stm32_usart_receive_chars(port, false);
uart_unlock_and_check_sysrq(port);
if (size)
@@ -898,14 +898,14 @@ static irqreturn_t stm32_usart_interrupt
}
if ((sr & USART_SR_TXE) && !(stm32_port->tx_ch)) {
- spin_lock(&port->lock);
+ uart_port_lock(port);
stm32_usart_transmit_chars(port);
- spin_unlock(&port->lock);
+ uart_port_unlock(port);
}
/* Receiver timeout irq for DMA RX */
if (stm32_usart_rx_dma_started(stm32_port) && !stm32_port->throttled) {
- spin_lock(&port->lock);
+ uart_port_lock(port);
size = stm32_usart_receive_chars(port, false);
uart_unlock_and_check_sysrq(port);
if (size)
@@ -993,7 +993,7 @@ static void stm32_usart_throttle(struct
const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
unsigned long flags;
- spin_lock_irqsave(&port->lock, flags);
+ uart_port_lock_irqsave(port, &flags);
/*
* Pause DMA transfer, so the RX data gets queued into the FIFO.
@@ -1006,7 +1006,7 @@ static void stm32_usart_throttle(struct
stm32_usart_clr_bits(port, ofs->cr3, stm32_port->cr3_irq);
stm32_port->throttled = true;
- spin_unlock_irqrestore(&port->lock, flags);
+ uart_port_unlock_irqrestore(port, flags);
}
/* Unthrottle the remote, the input buffer can now accept data. */
@@ -1016,7 +1016,7 @@ static void stm32_usart_unthrottle(struc
const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
unsigned long flags;
- spin_lock_irqsave(&port->lock, flags);
+ uart_port_lock_irqsave(port, &flags);
stm32_usart_set_bits(port, ofs->cr1, stm32_port->cr1_irq);
if (stm32_port->cr3_irq)
stm32_usart_set_bits(port, ofs->cr3, stm32_port->cr3_irq);
@@ -1030,7 +1030,7 @@ static void stm32_usart_unthrottle(struc
if (stm32_port->rx_ch)
stm32_usart_rx_dma_start_or_resume(port);
- spin_unlock_irqrestore(&port->lock, flags);
+ uart_port_unlock_irqrestore(port, flags);
}
/* Receive stop */
@@ -1158,7 +1158,7 @@ static void stm32_usart_set_termios(stru
baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 8);
- spin_lock_irqsave(&port->lock, flags);
+ uart_port_lock_irqsave(port, &flags);
ret = readl_relaxed_poll_timeout_atomic(port->membase + ofs->isr,
isr,
@@ -1349,7 +1349,7 @@ static void stm32_usart_set_termios(stru
writel_relaxed(cr1, port->membase + ofs->cr1);
stm32_usart_set_bits(port, ofs->cr1, BIT(cfg->uart_enable_bit));
- spin_unlock_irqrestore(&port->lock, flags);
+ uart_port_unlock_irqrestore(port, flags);
/* Handle modem control interrupts */
if (UART_ENABLE_MS(port, termios->c_cflag))
@@ -1399,9 +1399,9 @@ static void stm32_usart_pm(struct uart_p
pm_runtime_get_sync(port->dev);
break;
case UART_PM_STATE_OFF:
- spin_lock_irqsave(&port->lock, flags);
+ uart_port_lock_irqsave(port, &flags);
stm32_usart_clr_bits(port, ofs->cr1, BIT(cfg->uart_enable_bit));
- spin_unlock_irqrestore(&port->lock, flags);
+ uart_port_unlock_irqrestore(port, flags);
pm_runtime_put_sync(port->dev);
break;
}
@@ -1884,9 +1884,9 @@ static void stm32_usart_console_write(st
int locked = 1;
if (oops_in_progress)
- locked = spin_trylock_irqsave(&port->lock, flags);
+ locked = uart_port_trylock_irqsave(port, &flags);
else
- spin_lock_irqsave(&port->lock, flags);
+ uart_port_lock_irqsave(port, &flags);
/* Save and disable interrupts, enable the transmitter */
old_cr1 = readl_relaxed(port->membase + ofs->cr1);
@@ -1900,7 +1900,7 @@ static void stm32_usart_console_write(st
writel_relaxed(old_cr1, port->membase + ofs->cr1);
if (locked)
- spin_unlock_irqrestore(&port->lock, flags);
+ uart_port_unlock_irqrestore(port, flags);
}
static int stm32_usart_console_setup(struct console *co, char *options)
@@ -2035,7 +2035,7 @@ static int __maybe_unused stm32_usart_se
* low-power mode.
*/
if (stm32_port->rx_ch) {
- spin_lock_irqsave(&port->lock, flags);
+ uart_port_lock_irqsave(port, &flags);
/* Poll data from DMA RX buffer if any */
if (!stm32_usart_rx_dma_pause(stm32_port))
size += stm32_usart_receive_chars(port, true);
|
