summaryrefslogtreecommitdiffstats
path: root/drivers/clk/meson/a1-pll.c
blob: 90b0aeeb049c6127bda73c993a838349a36de9bb (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
// SPDX-License-Identifier: GPL-2.0+
/*
 * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
 * Author: Jian Hu <jian.hu@amlogic.com>
 *
 * Copyright (c) 2023, SberDevices. All Rights Reserved.
 * Author: Dmitry Rokosov <ddrokosov@sberdevices.ru>
 */

#include <linux/clk-provider.h>
#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#include "a1-pll.h"
#include "clk-regmap.h"
#include "meson-clkc-utils.h"

#include <dt-bindings/clock/amlogic,a1-pll-clkc.h>

static struct clk_regmap fixed_pll_dco = {
	.data = &(struct meson_clk_pll_data){
		.en = {
			.reg_off = ANACTRL_FIXPLL_CTRL0,
			.shift   = 28,
			.width   = 1,
		},
		.m = {
			.reg_off = ANACTRL_FIXPLL_CTRL0,
			.shift   = 0,
			.width   = 8,
		},
		.n = {
			.reg_off = ANACTRL_FIXPLL_CTRL0,
			.shift   = 10,
			.width   = 5,
		},
		.frac = {
			.reg_off = ANACTRL_FIXPLL_CTRL1,
			.shift   = 0,
			.width   = 19,
		},
		.l = {
			.reg_off = ANACTRL_FIXPLL_STS,
			.shift   = 31,
			.width   = 1,
		},
		.rst = {
			.reg_off = ANACTRL_FIXPLL_CTRL0,
			.shift   = 29,
			.width   = 1,
		},
	},
	.hw.init = &(struct clk_init_data){
		.name = "fixed_pll_dco",
		.ops = &meson_clk_pll_ro_ops,
		.parent_data = &(const struct clk_parent_data) {
			.fw_name = "fixpll_in",
		},
		.num_parents = 1,
	},
};

static struct clk_regmap fixed_pll = {
	.data = &(struct clk_regmap_gate_data){
		.offset = ANACTRL_FIXPLL_CTRL0,
		.bit_idx = 20,
	},
	.hw.init = &(struct clk_init_data) {
		.name = "fixed_pll",
		.ops = &clk_regmap_gate_ops,
		.parent_hws = (const struct clk_hw *[]) {
			&fixed_pll_dco.hw
		},
		.num_parents = 1,
	},
};

static const struct pll_mult_range hifi_pll_mult_range = {
	.min = 32,
	.max = 64,
};

static const struct reg_sequence hifi_init_regs[] = {
	{ .reg = ANACTRL_HIFIPLL_CTRL1, .def = 0x01800000 },
	{ .reg = ANACTRL_HIFIPLL_CTRL2, .def = 0x00001100 },
	{ .reg = ANACTRL_HIFIPLL_CTRL3, .def = 0x100a1100 },
	{ .reg = ANACTRL_HIFIPLL_CTRL4, .def = 0x00302000 },
	{ .reg = ANACTRL_HIFIPLL_CTRL0, .def = 0x01f18000 },
};

static struct clk_regmap hifi_pll = {
	.data = &(struct meson_clk_pll_data){
		.en = {
			.reg_off = ANACTRL_HIFIPLL_CTRL0,
			.shift   = 28,
			.width   = 1,
		},
		.m = {
			.reg_off = ANACTRL_HIFIPLL_CTRL0,
			.shift   = 0,
			.width   = 8,
		},
		.n = {
			.reg_off = ANACTRL_HIFIPLL_CTRL0,
			.shift   = 10,
			.width   = 5,
		},
		.frac = {
			.reg_off = ANACTRL_HIFIPLL_CTRL1,
			.shift   = 0,
			.width   = 19,
		},
		.l = {
			.reg_off = ANACTRL_HIFIPLL_STS,
			.shift   = 31,
			.width   = 1,
		},
		.current_en = {
			.reg_off = ANACTRL_HIFIPLL_CTRL0,
			.shift   = 26,
			.width   = 1,
		},
		.l_detect = {
			.reg_off = ANACTRL_HIFIPLL_CTRL2,
			.shift   = 6,
			.width   = 1,
		},
		.range = &hifi_pll_mult_range,
		.init_regs = hifi_init_regs,
		.init_count = ARRAY_SIZE(hifi_init_regs),
	},
	.hw.init = &(struct clk_init_data){
		.name = "hifi_pll",
		.ops = &meson_clk_pll_ops,
		.parent_data = &(const struct clk_parent_data) {
			.fw_name = "hifipll_in",
		},
		.num_parents = 1,
	},
};

static struct clk_fixed_factor fclk_div2_div = {
	.mult = 1,
	.div = 2,
	.hw.init = &(struct clk_init_data){
		.name = "fclk_div2_div",
		.ops = &clk_fixed_factor_ops,
		.parent_hws = (const struct clk_hw *[]) {
			&fixed_pll.hw
		},
		.num_parents = 1,
	},
};

static struct clk_regmap fclk_div2 = {
	.data = &(struct clk_regmap_gate_data){
		.offset = ANACTRL_FIXPLL_CTRL0,
		.bit_idx = 21,
	},
	.hw.init = &(struct clk_init_data){
		.name = "fclk_div2",
		.ops = &clk_regmap_gate_ops,
		.parent_hws = (const struct clk_hw *[]) {
			&fclk_div2_div.hw
		},
		.num_parents = 1,
		/*
		 * This clock is used by DDR clock in BL2 firmware
		 * and is required by the platform to operate correctly.
		 * Until the following condition are met, we need this clock to
		 * be marked as critical:
		 * a) Mark the clock used by a firmware resource, if possible
		 * b) CCF has a clock hand-off mechanism to make the sure the
		 *    clock stays on until the proper driver comes along
		 */
		.flags = CLK_IS_CRITICAL,
	},
};

static struct clk_fixed_factor fclk_div3_div = {
	.mult = 1,
	.div = 3,
	.hw.init = &(struct clk_init_data){
		.name = "fclk_div3_div",
		.ops = &clk_fixed_factor_ops,
		.parent_hws = (const struct clk_hw *[]) {
			&fixed_pll.hw
		},
		.num_parents = 1,
	},
};

static struct clk_regmap fclk_div3 = {
	.data = &(struct clk_regmap_gate_data){
		.offset = ANACTRL_FIXPLL_CTRL0,
		.bit_idx = 22,
	},
	.hw.init = &(struct clk_init_data){
		.name = "fclk_div3",
		.ops = &clk_regmap_gate_ops,
		.parent_hws = (const struct clk_hw *[]) {
			&fclk_div3_div.hw
		},
		.num_parents = 1,
		/*
		 * This clock is used by APB bus which is set in boot ROM code
		 * and is required by the platform to operate correctly.
		 */
		.flags = CLK_IS_CRITICAL,
	},
};

static struct clk_fixed_factor fclk_div5_div = {
	.mult = 1,
	.div = 5,
	.hw.init = &(struct clk_init_data){
		.name = "fclk_div5_div",
		.ops = &clk_fixed_factor_ops,
		.parent_hws = (const struct clk_hw *[]) {
			&fixed_pll.hw
		},
		.num_parents = 1,
	},
};

static struct clk_regmap fclk_div5 = {
	.data = &(struct clk_regmap_gate_data){
		.offset = ANACTRL_FIXPLL_CTRL0,
		.bit_idx = 23,
	},
	.hw.init = &(struct clk_init_data){
		.name = "fclk_div5",
		.ops = &clk_regmap_gate_ops,
		.parent_hws = (const struct clk_hw *[]) {
			&fclk_div5_div.hw
		},
		.num_parents = 1,
		/*
		 * This clock is used by AXI bus which setted in Romcode
		 * and is required by the platform to operate correctly.
		 */
		.flags = CLK_IS_CRITICAL,
	},
};

static struct clk_fixed_factor fclk_div7_div = {
	.mult = 1,
	.div = 7,
	.hw.init = &(struct clk_init_data){
		.name = "fclk_div7_div",
		.ops = &clk_fixed_factor_ops,
		.parent_hws = (const struct clk_hw *[]) {
			&fixed_pll.hw
		},
		.num_parents = 1,
	},
};

static struct clk_regmap fclk_div7 = {
	.data = &(struct clk_regmap_gate_data){
		.offset = ANACTRL_FIXPLL_CTRL0,
		.bit_idx = 24,
	},
	.hw.init = &(struct clk_init_data){
		.name = "fclk_div7",
		.ops = &clk_regmap_gate_ops,
		.parent_hws = (const struct clk_hw *[]) {
			&fclk_div7_div.hw
		},
		.num_parents = 1,
	},
};

/* Array of all clocks registered by this provider */
static struct clk_hw *a1_pll_hw_clks[] = {
	[CLKID_FIXED_PLL_DCO]	= &fixed_pll_dco.hw,
	[CLKID_FIXED_PLL]	= &fixed_pll.hw,
	[CLKID_FCLK_DIV2_DIV]	= &fclk_div2_div.hw,
	[CLKID_FCLK_DIV3_DIV]	= &fclk_div3_div.hw,
	[CLKID_FCLK_DIV5_DIV]	= &fclk_div5_div.hw,
	[CLKID_FCLK_DIV7_DIV]	= &fclk_div7_div.hw,
	[CLKID_FCLK_DIV2]	= &fclk_div2.hw,
	[CLKID_FCLK_DIV3]	= &fclk_div3.hw,
	[CLKID_FCLK_DIV5]	= &fclk_div5.hw,
	[CLKID_FCLK_DIV7]	= &fclk_div7.hw,
	[CLKID_HIFI_PLL]	= &hifi_pll.hw,
};

static struct clk_regmap *const a1_pll_regmaps[] = {
	&fixed_pll_dco,
	&fixed_pll,
	&fclk_div2,
	&fclk_div3,
	&fclk_div5,
	&fclk_div7,
	&hifi_pll,
};

static struct regmap_config a1_pll_regmap_cfg = {
	.reg_bits   = 32,
	.val_bits   = 32,
	.reg_stride = 4,
	.max_register = ANACTRL_HIFIPLL_STS,
};

static struct meson_clk_hw_data a1_pll_clks = {
	.hws = a1_pll_hw_clks,
	.num = ARRAY_SIZE(a1_pll_hw_clks),
};

static int meson_a1_pll_probe(struct platform_device *pdev)
{
	struct device *dev = &pdev->dev;
	void __iomem *base;
	struct regmap *map;
	int clkid, i, err;

	base = devm_platform_ioremap_resource(pdev, 0);
	if (IS_ERR(base))
		return dev_err_probe(dev, PTR_ERR(base),
				     "can't ioremap resource\n");

	map = devm_regmap_init_mmio(dev, base, &a1_pll_regmap_cfg);
	if (IS_ERR(map))
		return dev_err_probe(dev, PTR_ERR(map),
				     "can't init regmap mmio region\n");

	/* Populate regmap for the regmap backed clocks */
	for (i = 0; i < ARRAY_SIZE(a1_pll_regmaps); i++)
		a1_pll_regmaps[i]->map = map;

	/* Register clocks */
	for (clkid = 0; clkid < a1_pll_clks.num; clkid++) {
		err = devm_clk_hw_register(dev, a1_pll_clks.hws[clkid]);
		if (err)
			return dev_err_probe(dev, err,
					     "clock[%d] registration failed\n",
					     clkid);
	}

	return devm_of_clk_add_hw_provider(dev, meson_clk_hw_get,
					   &a1_pll_clks);
}

static const struct of_device_id a1_pll_clkc_match_table[] = {
	{ .compatible = "amlogic,a1-pll-clkc", },
	{}
};
MODULE_DEVICE_TABLE(of, a1_pll_clkc_match_table);

static struct platform_driver a1_pll_clkc_driver = {
	.probe = meson_a1_pll_probe,
	.driver = {
		.name = "a1-pll-clkc",
		.of_match_table = a1_pll_clkc_match_table,
	},
};

module_platform_driver(a1_pll_clkc_driver);
MODULE_AUTHOR("Jian Hu <jian.hu@amlogic.com>");
MODULE_AUTHOR("Dmitry Rokosov <ddrokosov@sberdevices.ru>");
MODULE_LICENSE("GPL");